diff options
Diffstat (limited to 'Documentation/devicetree/bindings/mfd')
30 files changed, 1482 insertions, 335 deletions
diff --git a/Documentation/devicetree/bindings/mfd/ab8500.txt b/Documentation/devicetree/bindings/mfd/ab8500.txt index cd9e90c5d171..5c6eabeed341 100644 --- a/Documentation/devicetree/bindings/mfd/ab8500.txt +++ b/Documentation/devicetree/bindings/mfd/ab8500.txt @@ -1,7 +1,7 @@ * AB8500 Multi-Functional Device (MFD) Required parent device properties: -- compatible : contains "stericsson,ab8500"; +- compatible : contains "stericsson,ab8500" or "stericsson,ab8505"; - interrupts : contains the IRQ line for the AB8500 - interrupt-controller : describes the AB8500 as an Interrupt Controller (has its own domain) - #interrupt-cells : should be 2, for 2-cell format @@ -49,11 +49,13 @@ ab8500-charger : : vddadc : Charger interface : CH_WD_EXP : : Charger watchdog detected ab8500-gpadc : HW_CONV_END : vddadc : Analogue to Digital Converter SW_CONV_END : : -ab8500-gpio : : : GPIO Controller +ab8500-gpio : : : GPIO Controller (AB8500) +ab8505-gpio : : : GPIO Controller (AB8505) ab8500-ponkey : ONKEY_DBF : : Power-on Key ONKEY_DBR : : ab8500-pwm : : : Pulse Width Modulator -ab8500-regulator : : : Regulators +ab8500-regulator : : : Regulators (AB8500) +ab8505-regulator : : : Regulators (AB8505) ab8500-rtc : 60S : : Real Time Clock : ALARM : : ab8500-sysctrl : : : System Control @@ -69,6 +71,18 @@ Required child device properties: - compatible : "stericsson,ab8500-[bm|btemp|charger|fg|gpadc|gpio|ponkey| pwm|regulator|rtc|sysctrl|usb]"; + A few child devices require ADC channels from the GPADC node. Those follow the + standard bindings from iio/iio-bindings.txt and iio/adc/adc.txt + + abx500-temp : io-channels "aux1" and "aux2" for measuring external + temperatures. + ab8500-fg : io-channel "main_bat_v" for measuring main battery voltage, + ab8500-btemp : io-channels "btemp_ball" and "bat_ctrl" for measuring the + battery voltage. + ab8500-charger : io-channels "main_charger_v", "main_charger_c", "vbus_v", + "usb_charger_c" for measuring voltage and current of the + different charging supplies. + Optional child device properties: - interrupts : contains the device IRQ(s) using the 2-cell format (see above) - interrupt-names : contains names of IRQ resource in the order in which they were @@ -102,8 +116,115 @@ ab8500 { 39 0x4>; interrupt-names = "HW_CONV_END", "SW_CONV_END"; vddadc-supply = <&ab8500_ldo_tvout_reg>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + + /* GPADC channels */ + bat_ctrl: channel@1 { + reg = <0x01>; + }; + btemp_ball: channel@2 { + reg = <0x02>; + }; + main_charger_v: channel@3 { + reg = <0x03>; + }; + acc_detect1: channel@4 { + reg = <0x04>; + }; + acc_detect2: channel@5 { + reg = <0x05>; + }; + adc_aux1: channel@6 { + reg = <0x06>; + }; + adc_aux2: channel@7 { + reg = <0x07>; + }; + main_batt_v: channel@8 { + reg = <0x08>; + }; + vbus_v: channel@9 { + reg = <0x09>; + }; + main_charger_c: channel@a { + reg = <0x0a>; + }; + usb_charger_c: channel@b { + reg = <0x0b>; + }; + bk_bat_v: channel@c { + reg = <0x0c>; + }; + die_temp: channel@d { + reg = <0x0d>; + }; + usb_id: channel@e { + reg = <0x0e>; + }; + xtal_temp: channel@12 { + reg = <0x12>; + }; + vbat_true_meas: channel@13 { + reg = <0x13>; + }; + bat_ctrl_and_ibat: channel@1c { + reg = <0x1c>; + }; + vbat_meas_and_ibat: channel@1d { + reg = <0x1d>; + }; + vbat_true_meas_and_ibat: channel@1e { + reg = <0x1e>; + }; + bat_temp_and_ibat: channel@1f { + reg = <0x1f>; + }; }; + ab8500_temp { + compatible = "stericsson,abx500-temp"; + io-channels = <&gpadc 0x06>, + <&gpadc 0x07>; + io-channel-name = "aux1", "aux2"; + }; + + ab8500_battery: ab8500_battery { + stericsson,battery-type = "LIPO"; + thermistor-on-batctrl; + }; + + ab8500_fg { + compatible = "stericsson,ab8500-fg"; + battery = <&ab8500_battery>; + io-channels = <&gpadc 0x08>; + io-channel-name = "main_bat_v"; + }; + + ab8500_btemp { + compatible = "stericsson,ab8500-btemp"; + battery = <&ab8500_battery>; + io-channels = <&gpadc 0x02>, + <&gpadc 0x01>; + io-channel-name = "btemp_ball", + "bat_ctrl"; + }; + + ab8500_charger { + compatible = "stericsson,ab8500-charger"; + battery = <&ab8500_battery>; + vddadc-supply = <&ab8500_ldo_tvout_reg>; + io-channels = <&gpadc 0x03>, + <&gpadc 0x0a>, + <&gpadc 0x09>, + <&gpadc 0x0b>; + io-channel-name = "main_charger_v", + "main_charger_c", + "vbus_v", + "usb_charger_c"; + }; + ab8500-usb { compatible = "stericsson,ab8500-usb"; interrupts = < 90 0x4 diff --git a/Documentation/devicetree/bindings/mfd/allwinner,sun4i-a10-ts.yaml b/Documentation/devicetree/bindings/mfd/allwinner,sun4i-a10-ts.yaml new file mode 100644 index 000000000000..39afacc447b2 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/allwinner,sun4i-a10-ts.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/allwinner,sun4i-a10-ts.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 Resistive Touchscreen Controller Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +properties: + "#thermal-sensor-cells": + const: 0 + + compatible: + enum: + - allwinner,sun4i-a10-ts + - allwinner,sun5i-a13-ts + - allwinner,sun6i-a31-ts + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + allwinner,ts-attached: + $ref: /schemas/types.yaml#/definitions/flag + description: A touchscreen is attached to the controller + + allwinner,tp-sensitive-adjust: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - minimum: 0 + maximum: 15 + default: 15 + description: Sensitivity of pen down detection + + allwinner,filter-type: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - minimum: 0 + maximum: 3 + default: 1 + description: | + Select median and averaging filter. Sample used for median / + averaging filter: + 0: 4/2 + 1: 5/3 + 2: 8/4 + 3: 16/8 + +required: + - "#thermal-sensor-cells" + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + rtp: rtp@1c25000 { + compatible = "allwinner,sun4i-a10-ts"; + reg = <0x01c25000 0x100>; + interrupts = <29>; + allwinner,ts-attached; + #thermal-sensor-cells = <0>; + /* sensitive/noisy touch panel */ + allwinner,tp-sensitive-adjust = <0>; + allwinner,filter-type = <3>; + }; + +... diff --git a/Documentation/devicetree/bindings/mfd/allwinner,sun6i-a31-prcm.yaml b/Documentation/devicetree/bindings/mfd/allwinner,sun6i-a31-prcm.yaml new file mode 100644 index 000000000000..d131759ccaf3 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/allwinner,sun6i-a31-prcm.yaml @@ -0,0 +1,219 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/allwinner,sun6i-a31-prcm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A31 PRCM Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +deprecated: true + +properties: + compatible: + const: allwinner,sun6i-a31-prcm + + reg: + maxItems: 1 + +patternProperties: + "^.*_(clk|rst)$": + type: object + + properties: + compatible: + enum: + - allwinner,sun4i-a10-mod0-clk + - allwinner,sun6i-a31-apb0-clk + - allwinner,sun6i-a31-apb0-gates-clk + - allwinner,sun6i-a31-ar100-clk + - allwinner,sun6i-a31-clock-reset + - fixed-factor-clock + + allOf: + - if: + properties: + compatible: + contains: + const: allwinner,sun6i-a31-apb0-clk + + then: + properties: + "#clock-cells": + const: 0 + + # Already checked in the main schema + compatible: true + + clocks: + maxItems: 1 + + clock-output-names: + maxItems: 1 + + phandle: true + + required: + - "#clock-cells" + - compatible + - clocks + - clock-output-names + + additionalProperties: false + + - if: + properties: + compatible: + contains: + const: allwinner,sun6i-a31-apb0-gates-clk + + then: + properties: + "#clock-cells": + const: 1 + description: > + This additional argument passed to that clock is the + offset of the bit controlling this particular gate in + the register. + + # Already checked in the main schema + compatible: true + + clocks: + maxItems: 1 + + clock-output-names: + minItems: 1 + maxItems: 32 + + phandle: true + + required: + - "#clock-cells" + - compatible + - clocks + - clock-output-names + + additionalProperties: false + + - if: + properties: + compatible: + contains: + const: allwinner,sun6i-a31-ar100-clk + + then: + properties: + "#clock-cells": + const: 0 + + # Already checked in the main schema + compatible: true + + clocks: + maxItems: 4 + description: > + The parent order must match the hardware programming + order. + + clock-output-names: + maxItems: 1 + + phandle: true + + required: + - "#clock-cells" + - compatible + - clocks + - clock-output-names + + additionalProperties: false + + - if: + properties: + compatible: + contains: + const: allwinner,sun6i-a31-clock-reset + + then: + properties: + "#reset-cells": + const: 1 + + # Already checked in the main schema + compatible: true + + phandle: true + + required: + - "#reset-cells" + - compatible + + additionalProperties: false + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/sun6i-a31-ccu.h> + + prcm@1f01400 { + compatible = "allwinner,sun6i-a31-prcm"; + reg = <0x01f01400 0x200>; + + ar100: ar100_clk { + compatible = "allwinner,sun6i-a31-ar100-clk"; + #clock-cells = <0>; + clocks = <&rtc 0>, <&osc24M>, + <&ccu CLK_PLL_PERIPH>, + <&ccu CLK_PLL_PERIPH>; + clock-output-names = "ar100"; + }; + + ahb0: ahb0_clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + clocks = <&ar100>; + clock-output-names = "ahb0"; + }; + + apb0: apb0_clk { + compatible = "allwinner,sun6i-a31-apb0-clk"; + #clock-cells = <0>; + clocks = <&ahb0>; + clock-output-names = "apb0"; + }; + + apb0_gates: apb0_gates_clk { + compatible = "allwinner,sun6i-a31-apb0-gates-clk"; + #clock-cells = <1>; + clocks = <&apb0>; + clock-output-names = "apb0_pio", "apb0_ir", + "apb0_timer", "apb0_p2wi", + "apb0_uart", "apb0_1wire", + "apb0_i2c"; + }; + + ir_clk: ir_clk { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + clocks = <&rtc 0>, <&osc24M>; + clock-output-names = "ir"; + }; + + apb0_rst: apb0_rst { + compatible = "allwinner,sun6i-a31-clock-reset"; + #reset-cells = <1>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/mfd/allwinner,sun8i-a23-prcm.yaml b/Documentation/devicetree/bindings/mfd/allwinner,sun8i-a23-prcm.yaml new file mode 100644 index 000000000000..aa5e683b236c --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/allwinner,sun8i-a23-prcm.yaml @@ -0,0 +1,200 @@ +# SPDX-License-Identifier: GPL-2.0+ +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/allwinner,sun8i-a23-prcm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A23 PRCM Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +deprecated: true + +properties: + compatible: + const: allwinner,sun8i-a23-prcm + + reg: + maxItems: 1 + +patternProperties: + "^.*(clk|rst|codec).*$": + type: object + + properties: + compatible: + enum: + - fixed-factor-clock + - allwinner,sun8i-a23-apb0-clk + - allwinner,sun8i-a23-apb0-gates-clk + - allwinner,sun6i-a31-clock-reset + - allwinner,sun8i-a23-codec-analog + + required: + - compatible + + allOf: + - if: + properties: + compatible: + contains: + const: allwinner,sun8i-a23-apb0-clk + + then: + properties: + "#clock-cells": + const: 0 + + # Already checked in the main schema + compatible: true + + clocks: + maxItems: 1 + + clock-output-names: + maxItems: 1 + + phandle: true + + required: + - "#clock-cells" + - compatible + - clocks + - clock-output-names + + additionalProperties: false + + - if: + properties: + compatible: + contains: + const: allwinner,sun8i-a23-apb0-gates-clk + + then: + properties: + "#clock-cells": + const: 1 + description: > + This additional argument passed to that clock is the + offset of the bit controlling this particular gate in + the register. + + # Already checked in the main schema + compatible: true + + clocks: + maxItems: 1 + + clock-output-names: + minItems: 1 + maxItems: 32 + + phandle: true + + required: + - "#clock-cells" + - compatible + - clocks + - clock-output-names + + additionalProperties: false + + - if: + properties: + compatible: + contains: + const: allwinner,sun6i-a31-clock-reset + + then: + properties: + "#reset-cells": + const: 1 + + # Already checked in the main schema + compatible: true + + phandle: true + + required: + - "#reset-cells" + - compatible + + additionalProperties: false + + - if: + properties: + compatible: + contains: + const: allwinner,sun8i-a23-codec-analog + + then: + properties: + # Already checked in the main schema + compatible: true + + phandle: true + + required: + - compatible + + additionalProperties: false + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + prcm@1f01400 { + compatible = "allwinner,sun8i-a23-prcm"; + reg = <0x01f01400 0x200>; + + ar100: ar100_clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + clocks = <&osc24M>; + clock-output-names = "ar100"; + }; + + ahb0: ahb0_clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + clocks = <&ar100>; + clock-output-names = "ahb0"; + }; + + apb0: apb0_clk { + compatible = "allwinner,sun8i-a23-apb0-clk"; + #clock-cells = <0>; + clocks = <&ahb0>; + clock-output-names = "apb0"; + }; + + apb0_gates: apb0_gates_clk { + compatible = "allwinner,sun8i-a23-apb0-gates-clk"; + #clock-cells = <1>; + clocks = <&apb0>; + clock-output-names = "apb0_pio", "apb0_timer", + "apb0_rsb", "apb0_uart", + "apb0_i2c"; + }; + + apb0_rst: apb0_rst { + compatible = "allwinner,sun6i-a31-clock-reset"; + #reset-cells = <1>; + }; + + codec_analog: codec-analog { + compatible = "allwinner,sun8i-a23-codec-analog"; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/mfd/aspeed-scu.txt b/Documentation/devicetree/bindings/mfd/aspeed-scu.txt index ce8cf0ec6279..4d92c0bb6687 100644 --- a/Documentation/devicetree/bindings/mfd/aspeed-scu.txt +++ b/Documentation/devicetree/bindings/mfd/aspeed-scu.txt @@ -4,9 +4,7 @@ configuring elements such as clocks, pinmux, and reset. Required properties: - compatible: One of: "aspeed,ast2400-scu", "syscon", "simple-mfd" - "aspeed,g4-scu", "syscon", "simple-mfd" "aspeed,ast2500-scu", "syscon", "simple-mfd" - "aspeed,g5-scu", "syscon", "simple-mfd" - reg: contains the offset and length of the SCU memory region - #clock-cells: should be set to <1> - the system controller is also a diff --git a/Documentation/devicetree/bindings/mfd/atmel-gpbr.txt b/Documentation/devicetree/bindings/mfd/atmel-gpbr.txt index a28569540683..e8c525569f10 100644 --- a/Documentation/devicetree/bindings/mfd/atmel-gpbr.txt +++ b/Documentation/devicetree/bindings/mfd/atmel-gpbr.txt @@ -3,7 +3,9 @@ The GPBR are a set of battery-backed registers. Required properties: -- compatible: "atmel,at91sam9260-gpbr", "syscon" +- compatible: Should be one of the following: + "atmel,at91sam9260-gpbr", "syscon" + "microchip,sam9x60-gpbr", "syscon" - reg: contains offset/length value of the GPBR memory region. diff --git a/Documentation/devicetree/bindings/mfd/atmel-matrix.txt b/Documentation/devicetree/bindings/mfd/atmel-matrix.txt index e3ef50ca02a5..89d05c64fb01 100644 --- a/Documentation/devicetree/bindings/mfd/atmel-matrix.txt +++ b/Documentation/devicetree/bindings/mfd/atmel-matrix.txt @@ -13,6 +13,7 @@ Required properties: "atmel,at91sam9n12-matrix", "syscon" "atmel,at91sam9x5-matrix", "syscon" "atmel,sama5d3-matrix", "syscon" + "microchip,sam9x60-matrix", "syscon" - reg: Contains offset/length value of the Bus Matrix memory region. diff --git a/Documentation/devicetree/bindings/mfd/atmel-smc.txt b/Documentation/devicetree/bindings/mfd/atmel-smc.txt index 1103ce2030fb..5696d9fcb5dc 100644 --- a/Documentation/devicetree/bindings/mfd/atmel-smc.txt +++ b/Documentation/devicetree/bindings/mfd/atmel-smc.txt @@ -9,6 +9,7 @@ Required properties: "atmel,at91sam9260-smc", "syscon" "atmel,sama5d3-smc", "syscon" "atmel,sama5d2-smc", "syscon" + "microchip,sam9x60-smc", "syscon" - reg: Contains offset/length value of the SMC memory region. diff --git a/Documentation/devicetree/bindings/mfd/atmel-usart.txt b/Documentation/devicetree/bindings/mfd/atmel-usart.txt index 699fd3c9ace8..a09133066aff 100644 --- a/Documentation/devicetree/bindings/mfd/atmel-usart.txt +++ b/Documentation/devicetree/bindings/mfd/atmel-usart.txt @@ -1,10 +1,13 @@ * Atmel Universal Synchronous Asynchronous Receiver/Transmitter (USART) Required properties for USART: -- compatible: Should be "atmel,<chip>-usart" or "atmel,<chip>-dbgu" - The compatible <chip> indicated will be the first SoC to support an - additional mode or an USART new feature. - For the dbgu UART, use "atmel,<chip>-dbgu", "atmel,<chip>-usart" +- compatible: Should be one of the following: + - "atmel,at91rm9200-usart" + - "atmel,at91sam9260-usart" + - "microchip,sam9x60-usart" + - "atmel,at91rm9200-dbgu", "atmel,at91rm9200-usart" + - "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart" + - "microchip,sam9x60-dbgu", "microchip,sam9x60-usart" - reg: Should contain registers location and length - interrupts: Should contain interrupt - clock-names: tuple listing input clock names. diff --git a/Documentation/devicetree/bindings/mfd/da9062.txt b/Documentation/devicetree/bindings/mfd/da9062.txt index edca653a5777..857af982c88f 100644 --- a/Documentation/devicetree/bindings/mfd/da9062.txt +++ b/Documentation/devicetree/bindings/mfd/da9062.txt @@ -13,6 +13,7 @@ da9062-rtc : : Real-Time Clock da9062-onkey : : On Key da9062-watchdog : : Watchdog Timer da9062-thermal : : Thermal +da9062-gpio : : GPIOs The DA9061 PMIC consists of: @@ -38,6 +39,15 @@ Required properties: See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for further information on IRQ bindings. +Optional properties: + +- gpio-controller : Marks the device as a gpio controller. +- #gpio-cells : Should be two. The first cell is the pin number and the + second cell is used to specify the gpio polarity. + +See Documentation/devicetree/bindings/gpio/gpio.txt for further information on +GPIO bindings. + Sub-nodes: - regulators : This node defines the settings for the LDOs and BUCKs. @@ -66,6 +76,9 @@ Sub-nodes: details of individual regulator device can be found in: Documentation/devicetree/bindings/regulator/regulator.txt + regulator-initial-mode may be specified for buck regulators using mode values + from include/dt-bindings/regulator/dlg,da9063-regulator.h. + - rtc : This node defines settings required for the Real-Time Clock associated with the DA9062. There are currently no entries in this binding, however compatible = "dlg,da9062-rtc" should be added if a node is created. @@ -96,6 +109,7 @@ Example: regulator-max-microvolt = <1570000>; regulator-min-microamp = <500000>; regulator-max-microamp = <2000000>; + regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>; regulator-boot-on; }; DA9062_LDO1: ldo1 { diff --git a/Documentation/devicetree/bindings/mfd/madera.txt b/Documentation/devicetree/bindings/mfd/madera.txt index cad0f2800502..47e2b8bc6051 100644 --- a/Documentation/devicetree/bindings/mfd/madera.txt +++ b/Documentation/devicetree/bindings/mfd/madera.txt @@ -67,6 +67,14 @@ Optional properties: As defined in bindings/gpio.txt. Although optional, it is strongly recommended to use a hardware reset + - clocks: Should reference the clocks supplied on MCLK1, MCLK2 and MCLK3 + - clock-names: May contain up to three strings: + "mclk1" for the clock supplied on MCLK1, recommended to be a high + quality audio reference clock + "mclk2" for the clock supplied on MCLK2, required to be an always on + 32k clock + "mclk3" for the clock supplied on MCLK3 + - MICBIASx : Initial data for the MICBIAS regulators, as covered in Documentation/devicetree/bindings/regulator/regulator.txt. One for each MICBIAS generator (MICBIAS1, MICBIAS2, ...) diff --git a/Documentation/devicetree/bindings/mfd/max14577.txt b/Documentation/devicetree/bindings/mfd/max14577.txt index fc6f0f4e8beb..92070b346756 100644 --- a/Documentation/devicetree/bindings/mfd/max14577.txt +++ b/Documentation/devicetree/bindings/mfd/max14577.txt @@ -5,6 +5,8 @@ Battery Charger and SFOUT LDO output for powering USB devices. It is interfaced to host controller using I2C. MAX77836 additionally contains PMIC (with two LDO regulators) and Fuel Gauge. +For the description of Fuel Gauge low SOC alert interrupt see: +../power/supply/max17040_battery.txt Required properties: diff --git a/Documentation/devicetree/bindings/mfd/max77650.txt b/Documentation/devicetree/bindings/mfd/max77650.txt deleted file mode 100644 index b529d8d19335..000000000000 --- a/Documentation/devicetree/bindings/mfd/max77650.txt +++ /dev/null @@ -1,46 +0,0 @@ -MAX77650 ultra low-power PMIC from Maxim Integrated. - -Required properties: -------------------- -- compatible: Must be "maxim,max77650" -- reg: I2C device address. -- interrupts: The interrupt on the parent the controller is - connected to. -- interrupt-controller: Marks the device node as an interrupt controller. -- #interrupt-cells: Must be <2>. - -- gpio-controller: Marks the device node as a gpio controller. -- #gpio-cells: Must be <2>. The first cell is the pin number and - the second cell is used to specify the gpio active - state. - -Optional properties: --------------------- -gpio-line-names: Single string containing the name of the GPIO line. - -The GPIO-controller module is represented as part of the top-level PMIC -node. The device exposes a single GPIO line. - -For device-tree bindings of other sub-modules (regulator, power supply, -LEDs and onkey) refer to the binding documents under the respective -sub-system directories. - -For more details on GPIO bindings, please refer to the generic GPIO DT -binding document <devicetree/bindings/gpio/gpio.txt>. - -Example: --------- - - pmic@48 { - compatible = "maxim,max77650"; - reg = <0x48>; - - interrupt-controller; - interrupt-parent = <&gpio2>; - #interrupt-cells = <2>; - interrupts = <3 IRQ_TYPE_LEVEL_LOW>; - - gpio-controller; - #gpio-cells = <2>; - gpio-line-names = "max77650-charger"; - }; diff --git a/Documentation/devicetree/bindings/mfd/max77650.yaml b/Documentation/devicetree/bindings/mfd/max77650.yaml new file mode 100644 index 000000000000..4a70f875a6eb --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/max77650.yaml @@ -0,0 +1,149 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/max77650.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MAX77650 ultra low-power PMIC from Maxim Integrated. + +maintainers: + - Bartosz Golaszewski <bgolaszewski@baylibre.com> + +description: | + MAX77650 is an ultra-low power PMIC providing battery charging and power + supply for low-power IoT and wearable applications. + + The GPIO-controller module is represented as part of the top-level PMIC + node. The device exposes a single GPIO line. + + For device-tree bindings of other sub-modules (regulator, power supply, + LEDs and onkey) refer to the binding documents under the respective + sub-system directories. + +properties: + compatible: + const: maxim,max77650 + + reg: + description: + I2C device address. + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + description: + The first cell is the IRQ number, the second cell is the trigger type. + + gpio-controller: true + + "#gpio-cells": + const: 2 + description: + The first cell is the pin number and the second cell is used to specify + the gpio active state. + + gpio-line-names: + maxItems: 1 + description: + Single string containing the name of the GPIO line. + + regulators: + $ref: ../regulator/max77650-regulator.yaml + + charger: + $ref: ../power/supply/max77650-charger.yaml + + leds: + $ref: ../leds/leds-max77650.yaml + + onkey: + $ref: ../input/max77650-onkey.yaml + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - "#interrupt-cells" + - gpio-controller + - "#gpio-cells" + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/input/linux-event-codes.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@48 { + compatible = "maxim,max77650"; + reg = <0x48>; + + interrupt-controller; + interrupt-parent = <&gpio2>; + #interrupt-cells = <2>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "max77650-charger"; + + regulators { + compatible = "maxim,max77650-regulator"; + + max77650_ldo: regulator@0 { + regulator-compatible = "ldo"; + regulator-name = "max77650-ldo"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <2937500>; + }; + + max77650_sbb0: regulator@1 { + regulator-compatible = "sbb0"; + regulator-name = "max77650-sbb0"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1587500>; + }; + }; + + charger { + compatible = "maxim,max77650-charger"; + input-voltage-min-microvolt = <4200000>; + input-current-limit-microamp = <285000>; + }; + + leds { + compatible = "maxim,max77650-led"; + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "blue:usr0"; + }; + + led@1 { + reg = <1>; + label = "red:usr1"; + linux,default-trigger = "heartbeat"; + }; + + led@2 { + reg = <2>; + label = "green:usr2"; + }; + }; + + onkey { + compatible = "maxim,max77650-onkey"; + linux,code = <KEY_END>; + maxim,onkey-slide; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/max77693.txt b/Documentation/devicetree/bindings/mfd/max77693.txt index a3c60a7a3be1..0ced96e16c16 100644 --- a/Documentation/devicetree/bindings/mfd/max77693.txt +++ b/Documentation/devicetree/bindings/mfd/max77693.txt @@ -175,6 +175,7 @@ Example: maxim,thermal-regulation-celsius = <75>; maxim,battery-overcurrent-microamp = <3000000>; maxim,charge-input-threshold-microvolt = <4300000>; + }; led { compatible = "maxim,max77693-led"; diff --git a/Documentation/devicetree/bindings/mfd/mt6397.txt b/Documentation/devicetree/bindings/mfd/mt6397.txt index 0ebd08af777d..a9b105ac00a8 100644 --- a/Documentation/devicetree/bindings/mfd/mt6397.txt +++ b/Documentation/devicetree/bindings/mfd/mt6397.txt @@ -8,11 +8,12 @@ MT6397/MT6323 is a multifunction device with the following sub modules: - Clock - LED - Keys +- Power controller It is interfaced to host controller using SPI interface by a proprietary hardware called PMIC wrapper or pwrap. MT6397/MT6323 MFD is a child device of pwrap. See the following for pwarp node definitions: -Documentation/devicetree/bindings/soc/mediatek/pwrap.txt +../soc/mediatek/pwrap.txt This document describes the binding for MFD device and its sub module. @@ -22,14 +23,16 @@ compatible: "mediatek,mt6397" or "mediatek,mt6323" Optional subnodes: - rtc - Required properties: + Required properties: Should be one of follows + - compatible: "mediatek,mt6323-rtc" - compatible: "mediatek,mt6397-rtc" + For details, see ../rtc/rtc-mt6397.txt - regulators Required properties: - compatible: "mediatek,mt6397-regulator" - see Documentation/devicetree/bindings/regulator/mt6397-regulator.txt + see ../regulator/mt6397-regulator.txt - compatible: "mediatek,mt6323-regulator" - see Documentation/devicetree/bindings/regulator/mt6323-regulator.txt + see ../regulator/mt6323-regulator.txt - codec Required properties: - compatible: "mediatek,mt6397-codec" @@ -39,12 +42,17 @@ Optional subnodes: - led Required properties: - compatible: "mediatek,mt6323-led" - see Documentation/devicetree/bindings/leds/leds-mt6323.txt + see ../leds/leds-mt6323.txt - keys Required properties: - compatible: "mediatek,mt6397-keys" or "mediatek,mt6323-keys" - see Documentation/devicetree/bindings/input/mtk-pmic-keys.txt + see ../input/mtk-pmic-keys.txt + +- power-controller + Required properties: + - compatible: "mediatek,mt6323-pwrc" + For details, see ../power/reset/mt6323-poweroff.txt Example: pwrap: pwrap@1000f000 { diff --git a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt index 143706222a51..fffc8fde3302 100644 --- a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt +++ b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt @@ -29,6 +29,8 @@ Required properties: "qcom,pm8916", "qcom,pm8004", "qcom,pm8909", + "qcom,pm8950", + "qcom,pmi8950", "qcom,pm8998", "qcom,pmi8998", "qcom,pm8005", diff --git a/Documentation/devicetree/bindings/mfd/rn5t618.txt b/Documentation/devicetree/bindings/mfd/rn5t618.txt index 65c23263cc54..b74e5e94d1cb 100644 --- a/Documentation/devicetree/bindings/mfd/rn5t618.txt +++ b/Documentation/devicetree/bindings/mfd/rn5t618.txt @@ -14,6 +14,10 @@ Required properties: "ricoh,rc5t619" - reg: the I2C slave address of the device +Optional properties: + - system-power-controller: + See Documentation/devicetree/bindings/power/power-controller.txt + Sub-nodes: - regulators: the node is required if the regulator functionality is needed. The valid regulator names are: DCDC1, DCDC2, DCDC3, DCDC4 @@ -28,6 +32,7 @@ Example: pmic@32 { compatible = "ricoh,rn5t618"; reg = <0x32>; + system-power-controller; regulators { DCDC1 { diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml new file mode 100644 index 000000000000..4fbb9e734284 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml @@ -0,0 +1,193 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/rohm,bd71828-pmic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROHM BD71828 Power Management Integrated Circuit bindings + +maintainers: + - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> + +description: | + BD71828GW is a single-chip power management IC for battery-powered portable + devices. The IC integrates 7 buck converters, 7 LDOs, and a 1500 mA + single-cell linear charger. Also included is a Coulomb counter, a real-time + clock (RTC), and a 32.768 kHz clock gate. + +properties: + compatible: + const: rohm,bd71828 + + reg: + description: + I2C slave address. + maxItems: 1 + + interrupts: + maxItems: 1 + + gpio-controller: true + + "#gpio-cells": + const: 2 + description: | + The first cell is the pin number and the second cell is used to specify + flags. See ../gpio/gpio.txt for more information. + + clocks: + maxItems: 1 + + "#clock-cells": + const: 0 + + rohm,charger-sense-resistor-ohms: + minimum: 10000000 + maximum: 50000000 + description: | + BD71827 and BD71828 have SAR ADC for measuring charging currents. + External sense resistor (RSENSE in data sheet) should be used. If some + other but 30MOhm resistor is used the resistance value should be given + here in Ohms. + + regulators: + $ref: ../regulator/rohm,bd71828-regulator.yaml + description: + List of child nodes that specify the regulators. + + leds: + $ref: ../leds/rohm,bd71828-leds.yaml + + gpio-reserved-ranges: + description: | + Usage of BD71828 GPIO pins can be changed via OTP. This property can be + used to mark the pins which should not be configured for GPIO. Please see + the ../gpio/gpio.txt for more information. + +required: + - compatible + - reg + - interrupts + - clocks + - "#clock-cells" + - regulators + - gpio-controller + - "#gpio-cells" + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/leds/common.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + pmic: pmic@4b { + compatible = "rohm,bd71828"; + reg = <0x4b>; + + interrupt-parent = <&gpio1>; + interrupts = <29 IRQ_TYPE_LEVEL_LOW>; + + clocks = <&osc 0>; + #clock-cells = <0>; + clock-output-names = "bd71828-32k-out"; + + gpio-controller; + #gpio-cells = <2>; + gpio-reserved-ranges = <0 1>, <2 1>; + + rohm,charger-sense-resistor-ohms = <10000000>; + + regulators { + buck1: BUCK1 { + regulator-name = "buck1"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2000000>; + regulator-ramp-delay = <2500>; + }; + buck2: BUCK2 { + regulator-name = "buck2"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2000000>; + regulator-ramp-delay = <2500>; + }; + buck3: BUCK3 { + regulator-name = "buck3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <2000000>; + }; + buck4: BUCK4 { + regulator-name = "buck4"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1800000>; + }; + buck5: BUCK5 { + regulator-name = "buck5"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3300000>; + }; + buck6: BUCK6 { + regulator-name = "buck6"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2000000>; + regulator-ramp-delay = <2500>; + }; + buck7: BUCK7 { + regulator-name = "buck7"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2000000>; + regulator-ramp-delay = <2500>; + }; + ldo1: LDO1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + ldo2: LDO2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + ldo3: LDO3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + ldo4: LDO4 { + regulator-name = "ldo4"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + ldo5: LDO5 { + regulator-name = "ldo5"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + ldo6: LDO6 { + regulator-name = "ldo6"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + ldo7_reg: LDO7 { + regulator-name = "ldo7"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + }; + + leds { + compatible = "rohm,bd71828-leds"; + + led-1 { + rohm,led-compatible = "bd71828-grnled"; + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_GREEN>; + }; + led-2 { + rohm,led-compatible = "bd71828-ambled"; + function = LED_FUNCTION_CHARGING; + color = <LED_COLOR_ID_AMBER>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt b/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt index d759da606f75..30ea27c3936d 100644 --- a/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt +++ b/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt @@ -18,7 +18,7 @@ an optional sub-node. For "samsung,exynos5433-lpass" compatible this includes: UART, SLIMBUS, PCM, I2S, DMAC, Timers 0...4, VIC, WDT 0...1 devices. Bindings of the sub-nodes are described in: - ../serial/samsung_uart.txt + ../serial/samsung_uart.yaml ../sound/samsung-i2s.txt ../dma/arm-pl330.txt diff --git a/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml b/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml new file mode 100644 index 000000000000..1a4cc5f3fb33 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml @@ -0,0 +1,120 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/st,stm32-lptimer.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STM32 Low-Power Timers bindings + +description: | + The STM32 Low-Power Timer (LPTIM) is a 16-bit timer that provides several + functions + - PWM output (with programmable prescaler, configurable polarity) + - Trigger source for STM32 ADC/DAC (LPTIM_OUT) + - Several counter modes: + - quadrature encoder to detect angular position and direction of rotary + elements, from IN1 and IN2 input signals. + - simple counter from IN1 input signal. + +maintainers: + - Fabrice Gasnier <fabrice.gasnier@st.com> + +properties: + compatible: + const: st,stm32-lptimer + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: mux + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + pwm: + type: object + + properties: + compatible: + const: st,stm32-pwm-lp + + "#pwm-cells": + const: 3 + + required: + - "#pwm-cells" + - compatible + +patternProperties: + "^trigger@[0-9]+$": + type: object + + properties: + compatible: + const: st,stm32-lptimer-trigger + + reg: + description: Identify trigger hardware block. + items: + minimum: 0 + maximum: 2 + + required: + - compatible + - reg + + counter: + type: object + + properties: + compatible: + const: st,stm32-lptimer-counter + + required: + - compatible + +required: + - "#address-cells" + - "#size-cells" + - compatible + - reg + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/stm32mp1-clks.h> + timer@40002400 { + compatible = "st,stm32-lptimer"; + reg = <0x40002400 0x400>; + clocks = <&timer_clk>; + clock-names = "mux"; + #address-cells = <1>; + #size-cells = <0>; + + pwm { + compatible = "st,stm32-pwm-lp"; + #pwm-cells = <3>; + }; + + trigger@0 { + compatible = "st,stm32-lptimer-trigger"; + reg = <0>; + }; + + counter { + compatible = "st,stm32-lptimer-counter"; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml b/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml new file mode 100644 index 000000000000..590849ee9f32 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml @@ -0,0 +1,162 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/st,stm32-timers.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STM32 Timers bindings + +description: | + This hardware block provides 3 types of timer along with PWM functionality: + - advanced-control timers consist of a 16-bit auto-reload counter driven + by a programmable prescaler, break input feature, PWM outputs and + complementary PWM outputs channels. + - general-purpose timers consist of a 16-bit or 32-bit auto-reload counter + driven by a programmable prescaler and PWM outputs. + - basic timers consist of a 16-bit auto-reload counter driven by a + programmable prescaler. + +maintainers: + - Benjamin Gaignard <benjamin.gaignard@st.com> + - Fabrice Gasnier <fabrice.gasnier@st.com> + +properties: + compatible: + const: st,stm32-timers + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: int + + reset: + maxItems: 1 + + dmas: + minItems: 1 + maxItems: 7 + + dma-names: + items: + enum: [ ch1, ch2, ch3, ch4, up, trig, com ] + minItems: 1 + maxItems: 7 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + pwm: + type: object + + properties: + compatible: + const: st,stm32-pwm + + "#pwm-cells": + const: 3 + + st,breakinput: + description: + One or two <index level filter> to describe break input + configurations. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-matrix + - items: + items: + - description: | + "index" indicates on which break input (0 or 1) the + configuration should be applied. + enum: [ 0 , 1] + - description: | + "level" gives the active level (0=low or 1=high) of the + input signal for this configuration + enum: [ 0, 1 ] + - description: | + "filter" gives the filtering value (up to 15) to be applied. + maximum: 15 + minItems: 1 + maxItems: 2 + + required: + - "#pwm-cells" + - compatible + +patternProperties: + "^timer@[0-9]+$": + type: object + + properties: + compatible: + enum: + - st,stm32-timer-trigger + - st,stm32h7-timer-trigger + + reg: + description: Identify trigger hardware block. + items: + minimum: 0 + maximum: 16 + + required: + - compatible + - reg + + counter: + type: object + + properties: + compatible: + const: st,stm32-timer-counter + + required: + - compatible + +required: + - "#address-cells" + - "#size-cells" + - compatible + - reg + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/stm32mp1-clks.h> + timers2: timers@40000000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40000000 0x400>; + clocks = <&rcc TIM2_K>; + clock-names = "int"; + dmas = <&dmamux1 18 0x400 0x1>, + <&dmamux1 19 0x400 0x1>, + <&dmamux1 20 0x400 0x1>, + <&dmamux1 21 0x400 0x1>, + <&dmamux1 22 0x400 0x1>; + dma-names = "ch1", "ch2", "ch3", "ch4", "up"; + pwm { + compatible = "st,stm32-pwm"; + #pwm-cells = <3>; + st,breakinput = <0 1 5>; + }; + timer@0 { + compatible = "st,stm32-timer-trigger"; + reg = <0>; + }; + counter { + compatible = "st,stm32-timer-counter"; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/mfd/stm32-lptimer.txt b/Documentation/devicetree/bindings/mfd/stm32-lptimer.txt deleted file mode 100644 index fb54e4dad5b3..000000000000 --- a/Documentation/devicetree/bindings/mfd/stm32-lptimer.txt +++ /dev/null @@ -1,48 +0,0 @@ -STMicroelectronics STM32 Low-Power Timer - -The STM32 Low-Power Timer (LPTIM) is a 16-bit timer that provides several -functions: -- PWM output (with programmable prescaler, configurable polarity) -- Quadrature encoder, counter -- Trigger source for STM32 ADC/DAC (LPTIM_OUT) - -Required properties: -- compatible: Must be "st,stm32-lptimer". -- reg: Offset and length of the device's register set. -- clocks: Phandle to the clock used by the LP Timer module. -- clock-names: Must be "mux". -- #address-cells: Should be '<1>'. -- #size-cells: Should be '<0>'. - -Optional subnodes: -- pwm: See ../pwm/pwm-stm32-lp.txt -- counter: See ../counter/stm32-lptimer-cnt.txt -- trigger: See ../iio/timer/stm32-lptimer-trigger.txt - -Example: - - timer@40002400 { - compatible = "st,stm32-lptimer"; - reg = <0x40002400 0x400>; - clocks = <&timer_clk>; - clock-names = "mux"; - #address-cells = <1>; - #size-cells = <0>; - - pwm { - compatible = "st,stm32-pwm-lp"; - pinctrl-names = "default"; - pinctrl-0 = <&lppwm1_pins>; - }; - - trigger@0 { - compatible = "st,stm32-lptimer-trigger"; - reg = <0>; - }; - - counter { - compatible = "st,stm32-lptimer-counter"; - pinctrl-names = "default"; - pinctrl-0 = <&lptim1_in_pins>; - }; - }; diff --git a/Documentation/devicetree/bindings/mfd/stm32-timers.txt b/Documentation/devicetree/bindings/mfd/stm32-timers.txt deleted file mode 100644 index 15c3b87f51d9..000000000000 --- a/Documentation/devicetree/bindings/mfd/stm32-timers.txt +++ /dev/null @@ -1,73 +0,0 @@ -STM32 Timers driver bindings - -This IP provides 3 types of timer along with PWM functionality: -- advanced-control timers consist of a 16-bit auto-reload counter driven by a programmable - prescaler, break input feature, PWM outputs and complementary PWM ouputs channels. -- general-purpose timers consist of a 16-bit or 32-bit auto-reload counter driven by a - programmable prescaler and PWM outputs. -- basic timers consist of a 16-bit auto-reload counter driven by a programmable prescaler. - -Required parameters: -- compatible: must be "st,stm32-timers" - -- reg: Physical base address and length of the controller's - registers. -- clock-names: Set to "int". -- clocks: Phandle to the clock used by the timer module. - For Clk properties, please refer to ../clock/clock-bindings.txt - -Optional parameters: -- resets: Phandle to the parent reset controller. - See ../reset/st,stm32-rcc.txt -- dmas: List of phandle to dma channels that can be used for - this timer instance. There may be up to 7 dma channels. -- dma-names: List of dma names. Must match 'dmas' property. Valid - names are: "ch1", "ch2", "ch3", "ch4", "up", "trig", - "com". - -Optional subnodes: -- pwm: See ../pwm/pwm-stm32.txt -- timer: See ../iio/timer/stm32-timer-trigger.txt -- counter: See ../counter/stm32-timer-cnt.txt - -Example: - timers@40010000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "st,stm32-timers"; - reg = <0x40010000 0x400>; - clocks = <&rcc 0 160>; - clock-names = "int"; - - pwm { - compatible = "st,stm32-pwm"; - pinctrl-0 = <&pwm1_pins>; - pinctrl-names = "default"; - }; - - timer@0 { - compatible = "st,stm32-timer-trigger"; - reg = <0>; - }; - - counter { - compatible = "st,stm32-timer-counter"; - pinctrl-names = "default"; - pinctrl-0 = <&tim1_in_pins>; - }; - }; - -Example with all dmas: - timer@40010000 { - ... - dmas = <&dmamux1 11 0x400 0x0>, - <&dmamux1 12 0x400 0x0>, - <&dmamux1 13 0x400 0x0>, - <&dmamux1 14 0x400 0x0>, - <&dmamux1 15 0x400 0x0>, - <&dmamux1 16 0x400 0x0>, - <&dmamux1 17 0x400 0x0>; - dma-names = "ch1", "ch2", "ch3", "ch4", "up", "trig", "com"; - ... - child nodes... - }; diff --git a/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt b/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt deleted file mode 100644 index 86dd8191b04c..000000000000 --- a/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt +++ /dev/null @@ -1,59 +0,0 @@ -Allwinner SoCs' GPADC Device Tree bindings ------------------------------------------- -The Allwinner SoCs all have an ADC that can also act as a thermal sensor -and sometimes as a touchscreen controller. - -Required properties: - - compatible: "allwinner,sun8i-a33-ths", - - reg: mmio address range of the chip, - - #thermal-sensor-cells: shall be 0, - - #io-channel-cells: shall be 0, - -Example: - ths: ths@1c25000 { - compatible = "allwinner,sun8i-a33-ths"; - reg = <0x01c25000 0x100>; - #thermal-sensor-cells = <0>; - #io-channel-cells = <0>; - }; - -sun4i, sun5i and sun6i SoCs are also supported via the older binding: - -sun4i resistive touchscreen controller --------------------------------------- - -Required properties: - - compatible: "allwinner,sun4i-a10-ts", "allwinner,sun5i-a13-ts" or - "allwinner,sun6i-a31-ts" - - reg: mmio address range of the chip - - interrupts: interrupt to which the chip is connected - - #thermal-sensor-cells: shall be 0 - -Optional properties: - - allwinner,ts-attached : boolean indicating that an actual touchscreen - is attached to the controller - - allwinner,tp-sensitive-adjust : integer (4 bits) - adjust sensitivity of pen down detection - between 0 (least sensitive) and 15 - (defaults to 15) - - allwinner,filter-type : integer (2 bits) - select median and averaging filter - samples used for median / averaging filter - 0: 4/2 - 1: 5/3 - 2: 8/4 - 3: 16/8 - (defaults to 1) - -Example: - - rtp: rtp@1c25000 { - compatible = "allwinner,sun4i-a10-ts"; - reg = <0x01c25000 0x100>; - interrupts = <29>; - allwinner,ts-attached; - #thermal-sensor-cells = <0>; - /* sensitive/noisy touch panel */ - allwinner,tp-sensitive-adjust = <0>; - allwinner,filter-type = <3>; - }; diff --git a/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt b/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt deleted file mode 100644 index daa091c2e67b..000000000000 --- a/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt +++ /dev/null @@ -1,59 +0,0 @@ -* Allwinner PRCM (Power/Reset/Clock Management) Multi-Functional Device - -PRCM is an MFD device exposing several Power Management related devices -(like clks and reset controllers). - -Required properties: - - compatible: "allwinner,sun6i-a31-prcm" or "allwinner,sun8i-a23-prcm" - - reg: The PRCM registers range - -The prcm node may contain several subdevices definitions: - - see Documentation/devicetree/bindings/clock/sunxi.txt for clock devices - - see Documentation/devicetree/bindings/reset/allwinner,sunxi-clock-reset.txt for reset - controller devices - - -Example: - - prcm: prcm@1f01400 { - compatible = "allwinner,sun6i-a31-prcm"; - reg = <0x01f01400 0x200>; - - /* Put subdevices here */ - ar100: ar100_clk { - compatible = "allwinner,sun6i-a31-ar100-clk"; - #clock-cells = <0>; - clocks = <&osc32k>, <&osc24M>, <&pll6>, <&pll6>; - }; - - ahb0: ahb0_clk { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clock-div = <1>; - clock-mult = <1>; - clocks = <&ar100_div>; - clock-output-names = "ahb0"; - }; - - apb0: apb0_clk { - compatible = "allwinner,sun6i-a31-apb0-clk"; - #clock-cells = <0>; - clocks = <&ahb0>; - clock-output-names = "apb0"; - }; - - apb0_gates: apb0_gates_clk { - compatible = "allwinner,sun6i-a31-apb0-gates-clk"; - #clock-cells = <1>; - clocks = <&apb0>; - clock-output-names = "apb0_pio", "apb0_ir", - "apb0_timer01", "apb0_p2wi", - "apb0_uart", "apb0_1wire", - "apb0_i2c"; - }; - - apb0_rst: apb0_rst { - compatible = "allwinner,sun6i-a31-clock-reset"; - #reset-cells = <1>; - }; - }; diff --git a/Documentation/devicetree/bindings/mfd/syscon.txt b/Documentation/devicetree/bindings/mfd/syscon.txt deleted file mode 100644 index 25d9e9c2fd53..000000000000 --- a/Documentation/devicetree/bindings/mfd/syscon.txt +++ /dev/null @@ -1,32 +0,0 @@ -* System Controller Registers R/W driver - -System controller node represents a register region containing a set -of miscellaneous registers. The registers are not cohesive enough to -represent as any specific type of device. The typical use-case is for -some other node's driver, or platform-specific code, to acquire a -reference to the syscon node (e.g. by phandle, node path, or search -using a specific compatible value), interrogate the node (or associated -OS driver) to determine the location of the registers, and access the -registers directly. - -Required properties: -- compatible: Should contain "syscon". -- reg: the register region can be accessed from syscon - -Optional property: -- reg-io-width: the size (in bytes) of the IO accesses that should be - performed on the device. -- hwlocks: reference to a phandle of a hardware spinlock provider node. - -Examples: -gpr: iomuxc-gpr@20e0000 { - compatible = "fsl,imx6q-iomuxc-gpr", "syscon"; - reg = <0x020e0000 0x38>; - hwlocks = <&hwlock1 1>; -}; - -hwlock1: hwspinlock@40500000 { - ... - reg = <0x40500000 0x1000>; - #hwlock-cells = <1>; -}; diff --git a/Documentation/devicetree/bindings/mfd/syscon.yaml b/Documentation/devicetree/bindings/mfd/syscon.yaml new file mode 100644 index 000000000000..39375e4313d2 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/syscon.yaml @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/syscon.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: System Controller Registers R/W Device Tree Bindings + +description: | + System controller node represents a register region containing a set + of miscellaneous registers. The registers are not cohesive enough to + represent as any specific type of device. The typical use-case is + for some other node's driver, or platform-specific code, to acquire + a reference to the syscon node (e.g. by phandle, node path, or + search using a specific compatible value), interrogate the node (or + associated OS driver) to determine the location of the registers, + and access the registers directly. + +maintainers: + - Lee Jones <lee.jones@linaro.org> + +select: + properties: + compatible: + contains: + enum: + - syscon + + required: + - compatible + +properties: + compatible: + anyOf: + - items: + - enum: + - allwinner,sun8i-a83t-system-controller + - allwinner,sun8i-h3-system-controller + - allwinner,sun8i-v3s-system-controller + - allwinner,sun50i-a64-system-controller + + - const: syscon + + - contains: + const: syscon + additionalItems: true + + reg: + maxItems: 1 + + reg-io-width: + description: | + The size (in bytes) of the IO accesses that should be performed + on the device. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [ 1, 2, 4, 8 ] + + hwlocks: + maxItems: 1 + description: + Reference to a phandle of a hardware spinlock provider node. + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + syscon: syscon@1c00000 { + compatible = "allwinner,sun8i-h3-system-controller", "syscon"; + reg = <0x01c00000 0x1000>; + }; + + - | + gpr: iomuxc-gpr@20e0000 { + compatible = "fsl,imx6q-iomuxc-gpr", "syscon"; + reg = <0x020e0000 0x38>; + hwlocks = <&hwlock1 1>; + }; + +... diff --git a/Documentation/devicetree/bindings/mfd/tps6105x.txt b/Documentation/devicetree/bindings/mfd/tps6105x.txt index 93602c7a19c8..dc448a9d5b4d 100644 --- a/Documentation/devicetree/bindings/mfd/tps6105x.txt +++ b/Documentation/devicetree/bindings/mfd/tps6105x.txt @@ -7,11 +7,56 @@ Required properties: - compatible: "ti,tps61050" or "ti,tps61052" - reg: Specifies the I2C slave address -Example: +Optional sub-node: + +This subnode selects the chip's operational mode. +There can be at most one single available subnode. + +- regulator: presence of this sub-node puts the chip in regulator mode. + see ../regulator/regulator.yaml + +- led: presence of this sub-node puts the chip in led mode. + Optional properties: + - function : see ../leds/common.txt + - color : see ../leds/common.txt + - label : see ../leds/common.txt + (deprecated) + +Example (GPIO operation only): + +i2c0 { + tps61052@33 { + compatible = "ti,tps61052"; + reg = <0x33>; + }; +}; + +Example (GPIO + regulator operation): i2c0 { tps61052@33 { compatible = "ti,tps61052"; reg = <0x33>; + + regulator { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + }; +}; + +Example (GPIO + led operation): + +#include <dt-bindings/leds/common.h> + +i2c0 { + tps61052@33 { + compatible = "ti,tps61052"; + reg = <0x33>; + + led { + color = <LED_COLOR_ID_WHITE>; + }; }; }; diff --git a/Documentation/devicetree/bindings/mfd/xylon,logicvc.yaml b/Documentation/devicetree/bindings/mfd/xylon,logicvc.yaml new file mode 100644 index 000000000000..abc9937506e0 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/xylon,logicvc.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 Bootlin +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/mfd/xylon,logicvc.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Xylon LogiCVC multi-function device + +maintainers: + - Paul Kocialkowski <paul.kocialkowski@bootlin.com> + +description: | + The LogiCVC is a display controller that also contains a GPIO controller. + As a result, a multi-function device is exposed as parent of the display + and GPIO blocks. + +properties: + compatible: + items: + - enum: + - xylon,logicvc-3.02.a + - const: syscon + - const: simple-mfd + + reg: + maxItems: 1 + +select: + properties: + compatible: + contains: + enum: + - xylon,logicvc-3.02.a + + required: + - compatible + +required: + - compatible + - reg + +examples: + - | + logicvc: logicvc@43c00000 { + compatible = "xylon,logicvc-3.02.a", "syscon", "simple-mfd"; + reg = <0x43c00000 0x6000>; + #address-cells = <1>; + #size-cells = <1>; + }; |
