1 files changed, 0 insertions, 66 deletions
diff --git a/Documentation/devicetree/bindings/leds/leds-gpio.txt b/Documentation/devicetree/bindings/leds/leds-gpio.txt
deleted file mode 100644
index a48dda268f81..000000000000
--- a/Documentation/devicetree/bindings/leds/leds-gpio.txt
+++ /dev/null
@@ -1,66 +0,0 @@
-LEDs connected to GPIO lines
-
-Required properties:
-- compatible : should be "gpio-leds".
-
-Each LED is represented as a sub-node of the gpio-leds device.  Each
-node's name represents the name of the corresponding LED.
-
-LED sub-node properties:
-- gpios :  Should specify the LED's GPIO, see "gpios property" in
-  Documentation/devicetree/bindings/gpio/gpio.txt.  Active low LEDs should be
-  indicated using flags in the GPIO specifier.
-- label :  (optional)
-  see Documentation/devicetree/bindings/leds/common.txt
-- linux,default-trigger :  (optional)
-  see Documentation/devicetree/bindings/leds/common.txt
-- default-state:  (optional) The initial state of the LED.
-  see Documentation/devicetree/bindings/leds/common.txt
-- retain-state-suspended: (optional) The suspend state can be retained.Such
-  as charge-led gpio.
-- retain-state-shutdown: (optional) Retain the state of the LED on shutdown.
-  Useful in BMC systems, for example when the BMC is rebooted while the host
-  remains up.
-- panic-indicator : (optional)
-  see Documentation/devicetree/bindings/leds/common.txt
-
-Examples:
-
-#include <dt-bindings/gpio/gpio.h>
-
-leds {
-	compatible = "gpio-leds";
-	hdd {
-		label = "Disk Activity";
-		gpios = <&mcu_pio 0 GPIO_ACTIVE_LOW>;
-		linux,default-trigger = "disk-activity";
-	};
-
-	fault {
-		gpios = <&mcu_pio 1 GPIO_ACTIVE_HIGH>;
-		/* Keep LED on if BIOS detected hardware fault */
-		default-state = "keep";
-	};
-};
-
-run-control {
-	compatible = "gpio-leds";
-	red {
-		gpios = <&mpc8572 6 GPIO_ACTIVE_HIGH>;
-		default-state = "off";
-	};
-	green {
-		gpios = <&mpc8572 7 GPIO_ACTIVE_HIGH>;
-		default-state = "on";
-	};
-};
-
-leds {
-	compatible = "gpio-leds";
-
-	charger-led {
-		gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-		linux,default-trigger = "max8903-charger-charging";
-		retain-state-suspended;
-	};
-};