diff options
Diffstat (limited to 'Documentation/devicetree/bindings/iio')
55 files changed, 2674 insertions, 526 deletions
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml new file mode 100644 index 000000000000..4147f02b5e3c --- /dev/null +++ b/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/accel/adi,adis16240.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ADIS16240 Programmable Impact Sensor and Recorder driver + +maintainers: + - Alexandru Ardelean <alexandru.ardelean@analog.com> + +description: | + ADIS16240 Programmable Impact Sensor and Recorder driver that supports + SPI interface. + https://www.analog.com/en/products/adis16240.html + +properties: + compatible: + enum: + - adi,adis16240 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + spi0 { + #address-cells = <1>; + #size-cells = <0>; + + /* Example for a SPI device node */ + accelerometer@0 { + compatible = "adi,adis16240"; + reg = <0>; + spi-max-frequency = <2500000>; + interrupt-parent = <&gpio0>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/accel/bma180.txt b/Documentation/devicetree/bindings/iio/accel/bma180.txt index 3b25b4c4d446..f53237270b32 100644 --- a/Documentation/devicetree/bindings/iio/accel/bma180.txt +++ b/Documentation/devicetree/bindings/iio/accel/bma180.txt @@ -1,11 +1,14 @@ -* Bosch BMA180 / BMA250 triaxial acceleration sensor +* Bosch BMA180 / BMA25x triaxial acceleration sensor http://omapworld.com/BMA180_111_1002839.pdf http://ae-bst.resource.bosch.com/media/products/dokumente/bma250/bst-bma250-ds002-05.pdf Required properties: - - compatible : should be "bosch,bma180" or "bosch,bma250" + - compatible : should be one of: + "bosch,bma180" + "bosch,bma250" + "bosch,bma254" - reg : the I2C address of the sensor Optional properties: diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml new file mode 100644 index 000000000000..c1c6d6f223cf --- /dev/null +++ b/Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/accel/bosch,bma400.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Bosch BMA400 triaxial acceleration sensor + +maintainers: + - Dan Robertson <dan@dlrobertson.com> + +description: | + Acceleration and temperature iio sensors with an i2c interface + + Specifications about the sensor can be found at: + https://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMA400-DS000.pdf + +properties: + compatible: + enum: + - bosch,bma400 + + reg: + maxItems: 1 + + vdd-supply: + description: phandle to the regulator that provides power to the accelerometer + + vddio-supply: + description: phandle to the regulator that provides power to the sensor's IO + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + accelerometer@14 { + compatible = "bosch,bma400"; + reg = <0x14>; + vdd-supply = <&vdd>; + vddio-supply = <&vddio>; + interrupt-parent = <&gpio0>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/accel/kionix,kxcjk1013.txt b/Documentation/devicetree/bindings/iio/accel/kionix,kxcjk1013.txt index eb76a02e2a82..ce950e162d5d 100644 --- a/Documentation/devicetree/bindings/iio/accel/kionix,kxcjk1013.txt +++ b/Documentation/devicetree/bindings/iio/accel/kionix,kxcjk1013.txt @@ -9,9 +9,16 @@ Required properties: "kionix,kxtf9" - reg: i2c slave address +Optional properties: + + - mount-matrix: an optional 3x3 mounting rotation matrix + Example: kxtf9@f { compatible = "kionix,kxtf9"; reg = <0x0F>; + mount-matrix = "0", "1", "0", + "1", "0", "0", + "0", "0", "1"; }; diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7091r5.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7091r5.yaml new file mode 100644 index 000000000000..31ffa275f5fa --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7091r5.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/adi,ad7091r5.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AD7091R5 4-Channel 12-Bit ADC + +maintainers: + - Beniamin Bia <beniamin.bia@analog.com> + +description: | + Analog Devices AD7091R5 4-Channel 12-Bit ADC + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7091r-5.pdf + +properties: + compatible: + enum: + - adi,ad7091r5 + + reg: + maxItems: 1 + + vref-supply: + description: + Phandle to the vref power supply + + interrupts: + maxItems: 1 + + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + adc@2f { + compatible = "adi,ad7091r5"; + reg = <0x2f>; + + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpio>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml index 9692b7f719f5..f0934b295edc 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml @@ -2,7 +2,7 @@ # Copyright 2019 Analog Devices Inc. %YAML 1.2 --- -$id: http://devicetree.org/schemas/bindings/iio/adc/adi,ad7124.yaml# +$id: http://devicetree.org/schemas/iio/adc/adi,ad7124.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Analog Devices AD7124 ADC device driver @@ -45,15 +45,12 @@ properties: refin1-supply: description: refin1 supply can be used as reference for conversion. - maxItems: 1 refin2-supply: description: refin2 supply can be used as reference for conversion. - maxItems: 1 avdd-supply: description: avdd supply can be used as reference for conversion. - maxItems: 1 required: - compatible diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml new file mode 100644 index 000000000000..84d25bd39488 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml @@ -0,0 +1,120 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 Analog Devices Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/adi,ad7192.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AD7192 ADC device driver + +maintainers: + - Michael Hennerich <michael.hennerich@analog.com> + +description: | + Bindings for the Analog Devices AD7192 ADC device. Datasheet can be + found here: + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7192.pdf + +properties: + compatible: + enum: + - adi,ad7190 + - adi,ad7192 + - adi,ad7193 + - adi,ad7195 + + reg: + maxItems: 1 + + spi-cpol: true + + spi-cpha: true + + clocks: + maxItems: 1 + description: phandle to the master clock (mclk) + + clock-names: + items: + - const: mclk + + interrupts: + maxItems: 1 + + dvdd-supply: + description: DVdd voltage supply + + avdd-supply: + description: AVdd voltage supply + + adi,rejection-60-Hz-enable: + description: | + This bit enables a notch at 60 Hz when the first notch of the sinc + filter is at 50 Hz. When REJ60 is set, a filter notch is placed at + 60 Hz when the sinc filter first notch is at 50 Hz. This allows + simultaneous 50 Hz/ 60 Hz rejection. + type: boolean + + adi,refin2-pins-enable: + description: | + External reference applied between the P1/REFIN2(+) and P0/REFIN2(−) pins. + type: boolean + + adi,buffer-enable: + description: | + Enables the buffer on the analog inputs. If cleared, the analog inputs + are unbuffered, lowering the power consumption of the device. If this + bit is set, the analog inputs are buffered, allowing the user to place + source impedances on the front end without contributing gain errors to + the system. + type: boolean + + adi,burnout-currents-enable: + description: | + When this bit is set to 1, the 500 nA current sources in the signal + path are enabled. When BURN = 0, the burnout currents are disabled. + The burnout currents can be enabled only when the buffer is active + and when chop is disabled. + type: boolean + + bipolar: + description: see Documentation/devicetree/bindings/iio/adc/adc.txt + type: boolean + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + - dvdd-supply + - avdd-supply + - spi-cpol + - spi-cpha + +examples: + - | + spi0 { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "adi,ad7192"; + reg = <0>; + spi-max-frequency = <1000000>; + spi-cpol; + spi-cpha; + clocks = <&ad7192_mclk>; + clock-names = "mclk"; + #interrupt-cells = <2>; + interrupts = <25 0x2>; + interrupt-parent = <&gpio>; + dvdd-supply = <&dvdd>; + avdd-supply = <&avdd>; + + adi,refin2-pins-enable; + adi,rejection-60-Hz-enable; + adi,buffer-enable; + adi,burnout-currents-enable; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml new file mode 100644 index 000000000000..e1f6d64bdccd --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml @@ -0,0 +1,105 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/adi,ad7292.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AD7292 10-Bit Monitor and Control System + +maintainers: + - Marcelo Schmitt <marcelo.schmitt1@gmail.com> + +description: | + Analog Devices AD7292 10-Bit Monitor and Control System with ADC, DACs, + Temperature Sensor, and GPIOs + + Specifications about the part can be found at: + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7292.pdf + +properties: + compatible: + enum: + - adi,ad7292 + + reg: + maxItems: 1 + + vref-supply: + description: | + The regulator supply for ADC and DAC reference voltage. + + spi-cpha: true + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +required: + - compatible + - reg + - spi-cpha + +patternProperties: + "^channel@[0-7]$": + type: object + description: | + Represents the external channels which are connected to the ADC. + See Documentation/devicetree/bindings/iio/adc/adc.txt. + + properties: + reg: + description: | + The channel number. It can have up to 8 channels numbered from 0 to 7. + items: + - minimum: 0 + maximum: 7 + + diff-channels: + description: see Documentation/devicetree/bindings/iio/adc/adc.txt + maxItems: 1 + + required: + - reg + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + ad7292: adc@0 { + compatible = "adi,ad7292"; + reg = <0>; + spi-max-frequency = <25000000>; + vref-supply = <&adc_vref>; + spi-cpha; + + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0>; + diff-channels = <0 1>; + }; + channel@2 { + reg = <2>; + }; + channel@3 { + reg = <3>; + }; + channel@4 { + reg = <4>; + }; + channel@5 { + reg = <5>; + }; + channel@6 { + reg = <6>; + }; + channel@7 { + reg = <7>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.txt b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.txt deleted file mode 100644 index d8652460198e..000000000000 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.txt +++ /dev/null @@ -1,66 +0,0 @@ -Analog Devices AD7606 Simultaneous Sampling ADC - -Required properties for the AD7606: - -- compatible: Must be one of - * "adi,ad7605-4" - * "adi,ad7606-8" - * "adi,ad7606-6" - * "adi,ad7606-4" - * "adi,ad7616" -- reg: SPI chip select number for the device -- spi-max-frequency: Max SPI frequency to use - see: Documentation/devicetree/bindings/spi/spi-bus.txt -- spi-cpha: See Documentation/devicetree/bindings/spi/spi-bus.txt -- avcc-supply: phandle to the Avcc power supply -- interrupts: IRQ line for the ADC - see: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt -- adi,conversion-start-gpios: must be the device tree identifier of the CONVST pin. - This logic input is used to initiate conversions on the analog - input channels. As the line is active high, it should be marked - GPIO_ACTIVE_HIGH. - -Optional properties: - -- reset-gpios: must be the device tree identifier of the RESET pin. If specified, - it will be asserted during driver probe. As the line is active high, - it should be marked GPIO_ACTIVE_HIGH. -- standby-gpios: must be the device tree identifier of the STBY pin. This pin is used - to place the AD7606 into one of two power-down modes, Standby mode or - Shutdown mode. As the line is active low, it should be marked - GPIO_ACTIVE_LOW. -- adi,first-data-gpios: must be the device tree identifier of the FRSTDATA pin. - The FRSTDATA output indicates when the first channel, V1, is - being read back on either the parallel, byte or serial interface. - As the line is active high, it should be marked GPIO_ACTIVE_HIGH. -- adi,range-gpios: must be the device tree identifier of the RANGE pin. The polarity on - this pin determines the input range of the analog input channels. If - this pin is tied to a logic high, the analog input range is ±10V for - all channels. If this pin is tied to a logic low, the analog input range - is ±5V for all channels. As the line is active high, it should be marked - GPIO_ACTIVE_HIGH. -- adi,oversampling-ratio-gpios: must be the device tree identifier of the over-sampling - mode pins. As the line is active high, it should be marked - GPIO_ACTIVE_HIGH. - -Example: - - adc@0 { - compatible = "adi,ad7606-8"; - reg = <0>; - spi-max-frequency = <1000000>; - spi-cpol; - - avcc-supply = <&adc_vref>; - - interrupts = <25 IRQ_TYPE_EDGE_FALLING>; - interrupt-parent = <&gpio>; - - adi,conversion-start-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; - reset-gpios = <&gpio 27 GPIO_ACTIVE_HIGH>; - adi,first-data-gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; - adi,oversampling-ratio-gpios = <&gpio 18 GPIO_ACTIVE_HIGH - &gpio 23 GPIO_ACTIVE_HIGH - &gpio 26 GPIO_ACTIVE_HIGH>; - standby-gpios = <&gpio 24 GPIO_ACTIVE_LOW>; - }; diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml new file mode 100644 index 000000000000..5117ad68a584 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml @@ -0,0 +1,135 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/adi,ad7606.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AD7606 Simultaneous Sampling ADC + +maintainers: + - Beniamin Bia <beniamin.bia@analog.com> + - Stefan Popa <stefan.popa@analog.com> + +description: | + Analog Devices AD7606 Simultaneous Sampling ADC + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7606_7606-6_7606-4.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7606B.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7616.pdf + +properties: + compatible: + enum: + - adi,ad7605-4 + - adi,ad7606-8 + - adi,ad7606-6 + - adi,ad7606-4 + - adi,ad7606b + - adi,ad7616 + + reg: + maxItems: 1 + + spi-cpha: true + + avcc-supply: true + + interrupts: + maxItems: 1 + + adi,conversion-start-gpios: + description: + Must be the device tree identifier of the CONVST pin. + This logic input is used to initiate conversions on the analog + input channels. As the line is active high, it should be marked + GPIO_ACTIVE_HIGH. + maxItems: 1 + + reset-gpios: + description: + Must be the device tree identifier of the RESET pin. If specified, + it will be asserted during driver probe. As the line is active high, + it should be marked GPIO_ACTIVE_HIGH. + maxItems: 1 + + standby-gpios: + description: + Must be the device tree identifier of the STBY pin. This pin is used + to place the AD7606 into one of two power-down modes, Standby mode or + Shutdown mode. As the line is active low, it should be marked + GPIO_ACTIVE_LOW. + maxItems: 1 + + adi,first-data-gpios: + description: + Must be the device tree identifier of the FRSTDATA pin. + The FRSTDATA output indicates when the first channel, V1, is + being read back on either the parallel, byte or serial interface. + As the line is active high, it should be marked GPIO_ACTIVE_HIGH. + maxItems: 1 + + adi,range-gpios: + description: + Must be the device tree identifier of the RANGE pin. The polarity on + this pin determines the input range of the analog input channels. If + this pin is tied to a logic high, the analog input range is ±10V for + all channels. If this pin is tied to a logic low, the analog input range + is ±5V for all channels. As the line is active high, it should be marked + GPIO_ACTIVE_HIGH. + maxItems: 1 + + adi,oversampling-ratio-gpios: + description: + Must be the device tree identifier of the over-sampling + mode pins. As the line is active high, it should be marked + GPIO_ACTIVE_HIGH. + maxItems: 3 + + adi,sw-mode: + description: + Software mode of operation, so far available only for ad7616 and ad7606b. + It is enabled when all three oversampling mode pins are connected to + high level. The device is configured by the corresponding registers. If the + adi,oversampling-ratio-gpios property is defined, then the driver will set the + oversampling gpios to high. Otherwise, it is assumed that the pins are hardwired + to VDD. + type: boolean + +required: + - compatible + - reg + - spi-cpha + - avcc-supply + - interrupts + - adi,conversion-start-gpios + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + spi0 { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "adi,ad7606-8"; + reg = <0>; + spi-max-frequency = <1000000>; + spi-cpol; + spi-cpha; + + avcc-supply = <&adc_vref>; + + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpio>; + + adi,conversion-start-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio 27 GPIO_ACTIVE_HIGH>; + adi,first-data-gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; + adi,oversampling-ratio-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>, + <&gpio 23 GPIO_ACTIVE_HIGH>, + <&gpio 26 GPIO_ACTIVE_HIGH>; + standby-gpios = <&gpio 24 GPIO_ACTIVE_LOW>; + adi,sw-mode; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml index d1109416963c..9acde6d2e2d9 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml @@ -39,7 +39,6 @@ properties: avdd-supply: description: The regulator supply for the ADC reference voltage. - maxItems: 1 powerdown-gpios: description: diff --git a/Documentation/devicetree/bindings/iio/adc/ads1015.txt b/Documentation/devicetree/bindings/iio/adc/ads1015.txt new file mode 100644 index 000000000000..918a507d1159 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/ads1015.txt @@ -0,0 +1,73 @@ +ADS1015 (I2C) + +This device is a 12-bit A-D converter with 4 inputs. + +The inputs can be used single ended or in certain differential combinations. + +For configuration all possible combinations are mapped to 8 channels: + 0: Voltage over AIN0 and AIN1. + 1: Voltage over AIN0 and AIN3. + 2: Voltage over AIN1 and AIN3. + 3: Voltage over AIN2 and AIN3. + 4: Voltage over AIN0 and GND. + 5: Voltage over AIN1 and GND. + 6: Voltage over AIN2 and GND. + 7: Voltage over AIN3 and GND. + +Each channel can be configured individually: + - pga is the programmable gain amplifier (values are full scale) + 0: +/- 6.144 V + 1: +/- 4.096 V + 2: +/- 2.048 V (default) + 3: +/- 1.024 V + 4: +/- 0.512 V + 5: +/- 0.256 V + - data_rate in samples per second + 0: 128 + 1: 250 + 2: 490 + 3: 920 + 4: 1600 (default) + 5: 2400 + 6: 3300 + +1) The /ads1015 node + + Required properties: + + - compatible : must be "ti,ads1015" + - reg : I2C bus address of the device + - #address-cells : must be <1> + - #size-cells : must be <0> + + The node contains child nodes for each channel that the platform uses. + + Example ADS1015 node: + + ads1015@49 { + compatible = "ti,ads1015"; + reg = <0x49>; + #address-cells = <1>; + #size-cells = <0>; + + [ child node definitions... ] + } + +2) channel nodes + + Required properties: + + - reg : the channel number + + Optional properties: + + - ti,gain : the programmable gain amplifier setting + - ti,datarate : the converter data rate + + Example ADS1015 channel node: + + channel@4 { + reg = <4>; + ti,gain = <3>; + ti,datarate = <5>; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/allwinner,sun8i-a33-ths.yaml b/Documentation/devicetree/bindings/iio/adc/allwinner,sun8i-a33-ths.yaml new file mode 100644 index 000000000000..15c514b83583 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/allwinner,sun8i-a33-ths.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/allwinner,sun8i-a33-ths.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A33 Thermal Sensor Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +properties: + "#io-channel-cells": + const: 0 + + "#thermal-sensor-cells": + const: 0 + + compatible: + const: allwinner,sun8i-a33-ths + + reg: + maxItems: 1 + +required: + - "#io-channel-cells" + - "#thermal-sensor-cells" + - compatible + - reg + +additionalProperties: false + +examples: + - | + ths: ths@1c25000 { + compatible = "allwinner,sun8i-a33-ths"; + reg = <0x01c25000 0x100>; + #thermal-sensor-cells = <0>; + #io-channel-cells = <0>; + }; + +... diff --git a/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt b/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt index 4a3c1d496e1a..07c59f301b31 100644 --- a/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt +++ b/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt @@ -1,7 +1,7 @@ * AT91 SAMA5D2 Analog to Digital Converter (ADC) Required properties: - - compatible: Should be "atmel,sama5d2-adc". + - compatible: Should be "atmel,sama5d2-adc" or "microchip,sam9x60-adc". - reg: Should contain ADC registers location and length. - interrupts: Should contain the IRQ line for the ADC. - clocks: phandle to device clock. diff --git a/Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml b/Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml index d76ece97c76c..91ab9c842273 100644 --- a/Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml +++ b/Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml @@ -41,7 +41,6 @@ properties: avdd-supply: description: Definition of the regulator used as analog supply - maxItems: 1 clock-frequency: minimum: 20000 diff --git a/Documentation/devicetree/bindings/iio/adc/ingenic,adc.txt b/Documentation/devicetree/bindings/iio/adc/ingenic,adc.txt index f01159f20d87..cd9048cf9dcf 100644 --- a/Documentation/devicetree/bindings/iio/adc/ingenic,adc.txt +++ b/Documentation/devicetree/bindings/iio/adc/ingenic,adc.txt @@ -5,6 +5,7 @@ Required properties: - compatible: Should be one of: * ingenic,jz4725b-adc * ingenic,jz4740-adc + * ingenic,jz4770-adc - reg: ADC controller registers location and length. - clocks: phandle to the SoC's ADC clock. - clock-names: Must be set to "adc". diff --git a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml new file mode 100644 index 000000000000..59009997dca0 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/lltc,ltc2496.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Linear Technology / Analog Devices LTC2496 ADC + +maintainers: + - Lars-Peter Clausen <lars@metafoo.de> + - Michael Hennerich <Michael.Hennerich@analog.com> + - Stefan Popa <stefan.popa@analog.com> + +properties: + compatible: + enum: + - lltc,ltc2496 + + vref-supply: + description: phandle to an external regulator providing the reference voltage + allOf: + - $ref: /schemas/types.yaml#/definitions/phandle + + reg: + description: spi chipselect number according to the usual spi bindings + + spi-max-frequency: + description: maximal spi bus frequency supported + +required: + - compatible + - vref-supply + - reg + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "lltc,ltc2496"; + reg = <0>; + vref-supply = <<c2496_reg>; + spi-max-frequency = <2000000>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/max1027-adc.txt b/Documentation/devicetree/bindings/iio/adc/max1027-adc.txt deleted file mode 100644 index e680c61dfb84..000000000000 --- a/Documentation/devicetree/bindings/iio/adc/max1027-adc.txt +++ /dev/null @@ -1,20 +0,0 @@ -* Maxim 1027/1029/1031 Analog to Digital Converter (ADC) - -Required properties: - - compatible: Should be "maxim,max1027" or "maxim,max1029" or "maxim,max1031" - - reg: SPI chip select number for the device - - interrupts: IRQ line for the ADC - see: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt - -Recommended properties: -- spi-max-frequency: Definition as per - Documentation/devicetree/bindings/spi/spi-bus.txt - -Example: -adc@0 { - compatible = "maxim,max1027"; - reg = <0>; - interrupt-parent = <&gpio5>; - interrupts = <15 IRQ_TYPE_EDGE_RISING>; - spi-max-frequency = <1000000>; -}; diff --git a/Documentation/devicetree/bindings/iio/adc/mcp3911.txt b/Documentation/devicetree/bindings/iio/adc/mcp3911.txt deleted file mode 100644 index 3071f48fb30b..000000000000 --- a/Documentation/devicetree/bindings/iio/adc/mcp3911.txt +++ /dev/null @@ -1,30 +0,0 @@ -* Microchip MCP3911 Dual channel analog front end (ADC) - -Required properties: - - compatible: Should be "microchip,mcp3911" - - reg: SPI chip select number for the device - -Recommended properties: - - spi-max-frequency: Definition as per - Documentation/devicetree/bindings/spi/spi-bus.txt. - Max frequency for this chip is 20MHz. - -Optional properties: - - clocks: Phandle and clock identifier for sampling clock - - interrupt-parent: Phandle to the parent interrupt controller - - interrupts: IRQ line for the ADC - - microchip,device-addr: Device address when multiple MCP3911 chips are present on the - same SPI bus. Valid values are 0-3. Defaults to 0. - - vref-supply: Phandle to the external reference voltage supply. - -Example: -adc@0 { - compatible = "microchip,mcp3911"; - reg = <0>; - interrupt-parent = <&gpio5>; - interrupts = <15 IRQ_TYPE_EDGE_RISING>; - spi-max-frequency = <20000000>; - microchip,device-addr = <0>; - vref-supply = <&vref_reg>; - clocks = <&xtal>; -}; diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml new file mode 100644 index 000000000000..0ce290473fb0 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +# Copyright 2019 Marcus Folkesson <marcus.folkesson@gmail.com> +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/iio/adc/microchip,mcp3911.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Microchip MCP3911 Dual channel analog front end (ADC) + +maintainers: + - Marcus Folkesson <marcus.folkesson@gmail.com> + - Kent Gustavsson <nedo80@gmail.com> + +description: | + Bindings for the Microchip MCP3911 Dual channel ADC device. Datasheet can be + found here: https://ww1.microchip.com/downloads/en/DeviceDoc/20002286C.pdf + +properties: + compatible: + enum: + - microchip,mcp3911 + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 20000000 + + clocks: + description: | + Phandle and clock identifier for external sampling clock. + If not specified, the internal crystal oscillator will be used. + maxItems: 1 + + interrupts: + description: IRQ line of the ADC + maxItems: 1 + + microchip,device-addr: + description: Device address when multiple MCP3911 chips are present on the same SPI bus. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [0, 1, 2, 3] + - default: 0 + + vref-supply: + description: | + Phandle to the external reference voltage supply. + If not specified, the internal voltage reference (1.2V) will be used. + +required: + - compatible + - reg + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "microchip,mcp3911"; + reg = <0>; + interrupt-parent = <&gpio5>; + interrupts = <15 2>; + spi-max-frequency = <20000000>; + microchip,device-addr = <0>; + vref-supply = <&vref_reg>; + clocks = <&xtal>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.txt b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.txt deleted file mode 100644 index e1fe02f3e3e9..000000000000 --- a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.txt +++ /dev/null @@ -1,107 +0,0 @@ -Samsung Exynos Analog to Digital Converter bindings - -The devicetree bindings are for the new ADC driver written for -Exynos4 and upward SoCs from Samsung. - -New driver handles the following -1. Supports ADC IF found on EXYNOS4412/EXYNOS5250 - and future SoCs from Samsung -2. Add ADC driver under iio/adc framework -3. Also adds the Documentation for device tree bindings - -Required properties: -- compatible: Must be "samsung,exynos-adc-v1" - for Exynos5250 controllers. - Must be "samsung,exynos-adc-v2" for - future controllers. - Must be "samsung,exynos3250-adc" for - controllers compatible with ADC of Exynos3250. - Must be "samsung,exynos4212-adc" for - controllers compatible with ADC of Exynos4212 and Exynos4412. - Must be "samsung,exynos7-adc" for - the ADC in Exynos7 and compatibles - Must be "samsung,s3c2410-adc" for - the ADC in s3c2410 and compatibles - Must be "samsung,s3c2416-adc" for - the ADC in s3c2416 and compatibles - Must be "samsung,s3c2440-adc" for - the ADC in s3c2440 and compatibles - Must be "samsung,s3c2443-adc" for - the ADC in s3c2443 and compatibles - Must be "samsung,s3c6410-adc" for - the ADC in s3c6410 and compatibles - Must be "samsung,s5pv210-adc" for - the ADC in s5pv210 and compatibles -- reg: List of ADC register address range - - The base address and range of ADC register - - The base address and range of ADC_PHY register (every - SoC except for s3c24xx/s3c64xx ADC) -- interrupts: Contains the interrupt information for the timer. The - format is being dependent on which interrupt controller - the Samsung device uses. -- #io-channel-cells = <1>; As ADC has multiple outputs -- clocks From common clock bindings: handles to clocks specified - in "clock-names" property, in the same order. -- clock-names From common clock bindings: list of clock input names - used by ADC block: - - "adc" : ADC bus clock - - "sclk" : ADC special clock (only for Exynos3250 and - compatible ADC block) -- vdd-supply VDD input supply. - -- samsung,syscon-phandle Contains the PMU system controller node - (To access the ADC_PHY register on Exynos5250/5420/5800/3250) -Optional properties: -- has-touchscreen: If present, indicates that a touchscreen is - connected an usable. - -Note: child nodes can be added for auto probing from device tree. - -Example: adding device info in dtsi file - -adc: adc@12d10000 { - compatible = "samsung,exynos-adc-v1"; - reg = <0x12D10000 0x100>; - interrupts = <0 106 0>; - #io-channel-cells = <1>; - io-channel-ranges; - - clocks = <&clock 303>; - clock-names = "adc"; - - vdd-supply = <&buck5_reg>; - samsung,syscon-phandle = <&pmu_system_controller>; -}; - -Example: adding device info in dtsi file for Exynos3250 with additional sclk - -adc: adc@126c0000 { - compatible = "samsung,exynos3250-adc", "samsung,exynos-adc-v2; - reg = <0x126C0000 0x100>; - interrupts = <0 137 0>; - #io-channel-cells = <1>; - io-channel-ranges; - - clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>; - clock-names = "adc", "sclk"; - - vdd-supply = <&buck5_reg>; - samsung,syscon-phandle = <&pmu_system_controller>; -}; - -Example: Adding child nodes in dts file - -adc@12d10000 { - - /* NTC thermistor is a hwmon device */ - ncp15wb473@0 { - compatible = "murata,ncp15wb473"; - pullup-uv = <1800000>; - pullup-ohm = <47000>; - pulldown-ohm = <0>; - io-channels = <&adc 4>; - }; -}; - -Note: Does not apply to ADC driver under arch/arm/plat-samsung/ -Note: The child node can be added under the adc node or separately. diff --git a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml new file mode 100644 index 000000000000..f46de17c0878 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml @@ -0,0 +1,151 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/samsung,exynos-adc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos Analog to Digital Converter (ADC) + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + +properties: + compatible: + enum: + - samsung,exynos-adc-v1 # Exynos5250 + - samsung,exynos-adc-v2 + - samsung,exynos3250-adc + - samsung,exynos4212-adc # Exynos4212 and Exynos4412 + - samsung,exynos7-adc + - samsung,s3c2410-adc + - samsung,s3c2416-adc + - samsung,s3c2440-adc + - samsung,s3c2443-adc + - samsung,s3c6410-adc + - samsung,s5pv210-adc + + reg: + maxItems: 1 + + clocks: + description: + Phandle to ADC bus clock. For Exynos3250 additional clock is needed. + minItems: 1 + maxItems: 2 + + clock-names: + description: + Must contain clock names (adc, sclk) matching phandles in clocks + property. + minItems: 1 + maxItems: 2 + + interrupts: + maxItems: 1 + + "#io-channel-cells": + const: 1 + + vdd-supply: true + + samsung,syscon-phandle: + $ref: '/schemas/types.yaml#/definitions/phandle' + description: + Phandle to the PMU system controller node (to access the ADC_PHY + register on Exynos3250/4x12/5250/5420/5800). + + has-touchscreen: + description: + If present, indicates that a touchscreen is connected and usable. + type: boolean + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + - "#io-channel-cells" + - vdd-supply + +allOf: + - if: + properties: + compatible: + contains: + enum: + - samsung,exynos-adc-v1 + - samsung,exynos-adc-v2 + - samsung,exynos3250-adc + - samsung,exynos4212-adc + - samsung,s5pv210-adc + then: + required: + - samsung,syscon-phandle + + - if: + properties: + compatible: + contains: + enum: + - samsung,exynos3250-adc + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + items: + - const: adc + - const: sclk + else: + properties: + clocks: + minItems: 1 + maxItems: 1 + clock-names: + items: + - const: adc + +examples: + - | + adc: adc@12d10000 { + compatible = "samsung,exynos-adc-v1"; + reg = <0x12d10000 0x100>; + interrupts = <0 106 0>; + #io-channel-cells = <1>; + io-channel-ranges; + + clocks = <&clock 303>; + clock-names = "adc"; + + vdd-supply = <&buck5_reg>; + samsung,syscon-phandle = <&pmu_system_controller>; + + /* NTC thermistor is a hwmon device */ + ncp15wb473@0 { + compatible = "murata,ncp15wb473"; + pullup-uv = <1800000>; + pullup-ohm = <47000>; + pulldown-ohm = <0>; + io-channels = <&adc 4>; + }; + }; + + - | + #include <dt-bindings/clock/exynos3250.h> + + adc@126c0000 { + compatible = "samsung,exynos3250-adc"; + reg = <0x126C0000 0x100>; + interrupts = <0 137 0>; + #io-channel-cells = <1>; + io-channel-ranges; + + clocks = <&cmu CLK_TSADC>, + <&cmu CLK_SCLK_TSADC>; + clock-names = "adc", "sclk"; + + vdd-supply = <&buck5_reg>; + samsung,syscon-phandle = <&pmu_system_controller>; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt b/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt deleted file mode 100644 index 59b92cd32552..000000000000 --- a/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt +++ /dev/null @@ -1,13 +0,0 @@ -Device-Tree bindings for sigma delta modulator - -Required properties: -- compatible: should be "ads1201", "sd-modulator". "sd-modulator" can be use - as a generic SD modulator if modulator not specified in compatible list. -- #io-channel-cells = <0>: See the IIO bindings section "IIO consumers". - -Example node: - - ads1202: adc { - compatible = "sd-modulator"; - #io-channel-cells = <0>; - }; diff --git a/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.yaml b/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.yaml new file mode 100644 index 000000000000..a390343d0c2a --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.yaml @@ -0,0 +1,37 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/sigma-delta-modulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Device-Tree bindings for sigma delta modulator + +maintainers: + - Arnaud Pouliquen <arnaud.pouliquen@st.com> + +properties: + compatible: + description: | + "sd-modulator" can be used as a generic SD modulator, + if the modulator is not specified in the compatible list. + enum: + - sd-modulator + - ads1201 + + '#io-channel-cells': + const: 0 + +required: + - compatible + - '#io-channel-cells' + +additionalProperties: false + +examples: + - | + ads1202: adc { + compatible = "sd-modulator"; + #io-channel-cells = <0>; + }; + +... diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt index 93a0bd2efc05..8de933146771 100644 --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt @@ -47,6 +47,14 @@ Required properties: Optional properties: - A pinctrl state named "default" for each ADC channel may be defined to set inX ADC pins in mode of operation for analog input on external pin. +- booster-supply: Phandle to the embedded booster regulator that can be used + to supply ADC analog input switches on stm32h7 and stm32mp1. +- vdd-supply: Phandle to the vdd input voltage. It can be used to supply ADC + analog input switches on stm32mp1. +- st,syscfg: Phandle to system configuration controller. It can be used to + control the analog circuitry on stm32mp1. +- st,max-clk-rate-hz: Allow to specify desired max clock rate used by analog + circuitry. Contents of a stm32 adc child node: ----------------------------------- diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.txt b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.txt deleted file mode 100644 index 75ba25d062e1..000000000000 --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.txt +++ /dev/null @@ -1,135 +0,0 @@ -STMicroelectronics STM32 DFSDM ADC device driver - - -STM32 DFSDM ADC is a sigma delta analog-to-digital converter dedicated to -interface external sigma delta modulators to STM32 micro controllers. -It is mainly targeted for: -- Sigma delta modulators (motor control, metering...) -- PDM microphones (audio digital microphone) - -It features up to 8 serial digital interfaces (SPI or Manchester) and -up to 4 filters on stm32h7 or 6 filters on stm32mp1. - -Each child node match with a filter instance. - -Contents of a STM32 DFSDM root node: ------------------------------------- -Required properties: -- compatible: Should be one of: - "st,stm32h7-dfsdm" - "st,stm32mp1-dfsdm" -- reg: Offset and length of the DFSDM block register set. -- clocks: IP and serial interfaces clocking. Should be set according - to rcc clock ID and "clock-names". -- clock-names: Input clock name "dfsdm" must be defined, - "audio" is optional. If defined CLKOUT is based on the audio - clock, else "dfsdm" is used. -- #interrupt-cells = <1>; -- #address-cells = <1>; -- #size-cells = <0>; - -Optional properties: -- spi-max-frequency: Requested only for SPI master mode. - SPI clock OUT frequency (Hz). This clock must be set according - to "clock" property. Frequency must be a multiple of the rcc - clock frequency. If not, SPI CLKOUT frequency will not be - accurate. -- pinctrl-names: Set to "default". -- pinctrl-0: List of phandles pointing to pin configuration - nodes to set pins in mode of operation for dfsdm - on external pin. - -Contents of a STM32 DFSDM child nodes: --------------------------------------- - -Required properties: -- compatible: Must be: - "st,stm32-dfsdm-adc" for sigma delta ADCs - "st,stm32-dfsdm-dmic" for audio digital microphone. -- reg: Specifies the DFSDM filter instance used. - Valid values are from 0 to 3 on stm32h7, 0 to 5 on stm32mp1. -- interrupts: IRQ lines connected to each DFSDM filter instance. -- st,adc-channels: List of single-ended channels muxed for this ADC. - valid values: - "st,stm32h7-dfsdm" compatibility: 0 to 7. -- st,adc-channel-names: List of single-ended channel names. -- st,filter-order: SinC filter order from 0 to 5. - 0: FastSinC - [1-5]: order 1 to 5. - For audio purpose it is recommended to use order 3 to 5. -- #io-channel-cells = <1>: See the IIO bindings section "IIO consumers". - -Required properties for "st,stm32-dfsdm-adc" compatibility: -- io-channels: From common IIO binding. Used to pipe external sigma delta - modulator or internal ADC output to DFSDM channel. - This is not required for "st,stm32-dfsdm-pdm" compatibility as - PDM microphone is binded in Audio DT node. - -Required properties for "st,stm32-dfsdm-pdm" compatibility: -- #sound-dai-cells: Must be set to 0. -- dma: DMA controller phandle and DMA request line associated to the - filter instance (specified by the field "reg") -- dma-names: Must be "rx" - -Optional properties: -- st,adc-channel-types: Single-ended channel input type. - - "SPI_R": SPI with data on rising edge (default) - - "SPI_F": SPI with data on falling edge - - "MANCH_R": manchester codec, rising edge = logic 0, falling edge = logic 1 - - "MANCH_F": manchester codec, rising edge = logic 1, falling edge = logic 0 -- st,adc-channel-clk-src: Conversion clock source. - - "CLKIN": external SPI clock (CLKIN x) - - "CLKOUT": internal SPI clock (CLKOUT) (default) - - "CLKOUT_F": internal SPI clock divided by 2 (falling edge). - - "CLKOUT_R": internal SPI clock divided by 2 (rising edge). - -- st,adc-alt-channel: Must be defined if two sigma delta modulator are - connected on same SPI input. - If not set, channel n is connected to SPI input n. - If set, channel n is connected to SPI input n + 1. - -- st,filter0-sync: Set to 1 to synchronize with DFSDM filter instance 0. - Used for multi microphones synchronization. - -Example of a sigma delta adc connected on DFSDM SPI port 0 -and a pdm microphone connected on DFSDM SPI port 1: - - ads1202: simple_sd_adc@0 { - compatible = "ads1202"; - #io-channel-cells = <1>; - }; - - dfsdm: dfsdm@40017000 { - compatible = "st,stm32h7-dfsdm"; - reg = <0x40017000 0x400>; - clocks = <&rcc DFSDM1_CK>; - clock-names = "dfsdm"; - #interrupt-cells = <1>; - #address-cells = <1>; - #size-cells = <0>; - - dfsdm_adc0: filter@0 { - compatible = "st,stm32-dfsdm-adc"; - #io-channel-cells = <1>; - reg = <0>; - interrupts = <110>; - st,adc-channels = <0>; - st,adc-channel-names = "sd_adc0"; - st,adc-channel-types = "SPI_F"; - st,adc-channel-clk-src = "CLKOUT"; - io-channels = <&ads1202 0>; - st,filter-order = <3>; - }; - dfsdm_pdm1: filter@1 { - compatible = "st,stm32-dfsdm-dmic"; - reg = <1>; - interrupts = <111>; - dmas = <&dmamux1 102 0x400 0x00>; - dma-names = "rx"; - st,adc-channels = <1>; - st,adc-channel-names = "dmic1"; - st,adc-channel-types = "SPI_R"; - st,adc-channel-clk-src = "CLKOUT"; - st,filter-order = <5>; - }; - } diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml new file mode 100644 index 000000000000..acf36eef728b --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml @@ -0,0 +1,332 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/st,stm32-dfsdm-adc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STM32 DFSDM ADC device driver + +maintainers: + - Fabrice Gasnier <fabrice.gasnier@st.com> + - Olivier Moysan <olivier.moysan@st.com> + +description: | + STM32 DFSDM ADC is a sigma delta analog-to-digital converter dedicated to + interface external sigma delta modulators to STM32 micro controllers. + It is mainly targeted for: + - Sigma delta modulators (motor control, metering...) + - PDM microphones (audio digital microphone) + + It features up to 8 serial digital interfaces (SPI or Manchester) and + up to 4 filters on stm32h7 or 6 filters on stm32mp1. + + Each child node matches with a filter instance. + +properties: + compatible: + enum: + - st,stm32h7-dfsdm + - st,stm32mp1-dfsdm + + reg: + maxItems: 1 + + clocks: + items: + - description: + Internal clock used for DFSDM digital processing and control blocks. + dfsdm clock can also feed CLKOUT, when CLKOUT is used. + - description: audio clock can be used as an alternate to feed CLKOUT. + minItems: 1 + maxItems: 2 + + clock-names: + items: + - const: dfsdm + - const: audio + minItems: 1 + maxItems: 2 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + spi-max-frequency: + description: + SPI clock OUT frequency (Hz). Requested only for SPI master mode. + This clock must be set according to the "clock" property. + Frequency must be a multiple of the rcc clock frequency. + If not, SPI CLKOUT frequency will not be accurate. + maximum: 20000000 + +required: + - compatible + - reg + - clocks + - clock-names + - "#address-cells" + - "#size-cells" + +patternProperties: + "^filter@[0-9]+$": + type: object + description: child node + + properties: + compatible: + enum: + - st,stm32-dfsdm-adc + - st,stm32-dfsdm-dmic + + reg: + description: Specifies the DFSDM filter instance used. + maxItems: 1 + + interrupts: + maxItems: 1 + + st,adc-channels: + description: | + List of single-ended channels muxed for this ADC. + On stm32h7 and stm32mp1: + - For st,stm32-dfsdm-adc: up to 8 channels numbered from 0 to 7. + - For st,stm32-dfsdm-dmic: 1 channel numbered from 0 to 7. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + - items: + minimum: 0 + maximum: 7 + + st,adc-channel-names: + description: List of single-ended channel names. + allOf: + - $ref: /schemas/types.yaml#/definitions/string-array + + st,filter-order: + description: | + SinC filter order from 0 to 5. + - 0: FastSinC + - [1-5]: order 1 to 5. + For audio purpose it is recommended to use order 3 to 5. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - items: + minimum: 0 + maximum: 5 + + "#io-channel-cells": + const: 1 + + st,adc-channel-types: + description: | + Single-ended channel input type. + - "SPI_R": SPI with data on rising edge (default) + - "SPI_F": SPI with data on falling edge + - "MANCH_R": manchester codec, rising edge = logic 0, falling edge = logic 1 + - "MANCH_F": manchester codec, rising edge = logic 1, falling edge = logic 0 + items: + enum: [ SPI_R, SPI_F, MANCH_R, MANCH_F ] + allOf: + - $ref: /schemas/types.yaml#/definitions/non-unique-string-array + + st,adc-channel-clk-src: + description: | + Conversion clock source. + - "CLKIN": external SPI clock (CLKIN x) + - "CLKOUT": internal SPI clock (CLKOUT) (default) + - "CLKOUT_F": internal SPI clock divided by 2 (falling edge). + - "CLKOUT_R": internal SPI clock divided by 2 (rising edge). + items: + enum: [ CLKIN, CLKOUT, CLKOUT_F, CLKOUT_R ] + allOf: + - $ref: /schemas/types.yaml#/definitions/non-unique-string-array + + st,adc-alt-channel: + description: + Must be defined if two sigma delta modulators are + connected on same SPI input. + If not set, channel n is connected to SPI input n. + If set, channel n is connected to SPI input n + 1. + type: boolean + + st,filter0-sync: + description: + Set to 1 to synchronize with DFSDM filter instance 0. + Used for multi microphones synchronization. + type: boolean + + dmas: + maxItems: 1 + + dma-names: + items: + - const: rx + + required: + - compatible + - reg + - interrupts + - st,adc-channels + - st,adc-channel-names + - st,filter-order + - "#io-channel-cells" + + allOf: + - if: + properties: + compatible: + contains: + const: st,stm32-dfsdm-adc + + - then: + properties: + st,adc-channels: + minItems: 1 + maxItems: 8 + + st,adc-channel-names: + minItems: 1 + maxItems: 8 + + st,adc-channel-types: + minItems: 1 + maxItems: 8 + + st,adc-channel-clk-src: + minItems: 1 + maxItems: 8 + + io-channels: + description: + From common IIO binding. Used to pipe external sigma delta + modulator or internal ADC output to DFSDM channel. + This is not required for "st,stm32-dfsdm-pdm" compatibility as + PDM microphone is binded in Audio DT node. + + required: + - io-channels + + - if: + properties: + compatible: + contains: + const: st,stm32-dfsdm-dmic + + - then: + properties: + st,adc-channels: + maxItems: 1 + + st,adc-channel-names: + maxItems: 1 + + st,adc-channel-types: + maxItems: 1 + + st,adc-channel-clk-src: + maxItems: 1 + + required: + - dmas + - dma-names + + patternProperties: + "^dfsdm-dai+$": + type: object + description: child node + + properties: + "#sound-dai-cells": + const: 0 + + io-channels: + description: + From common IIO binding. Used to pipe external sigma delta + modulator or internal ADC output to DFSDM channel. + + required: + - "#sound-dai-cells" + - io-channels + +allOf: + - if: + properties: + compatible: + contains: + const: st,stm32h7-dfsdm + + - then: + patternProperties: + "^filter@[0-9]+$": + properties: + reg: + items: + minimum: 0 + maximum: 3 + + - if: + properties: + compatible: + contains: + const: st,stm32mp1-dfsdm + + - then: + patternProperties: + "^filter@[0-9]+$": + properties: + reg: + items: + minimum: 0 + maximum: 5 + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/stm32mp1-clks.h> + dfsdm: dfsdm@4400d000 { + compatible = "st,stm32mp1-dfsdm"; + reg = <0x4400d000 0x800>; + clocks = <&rcc DFSDM_K>, <&rcc ADFSDM_K>; + clock-names = "dfsdm", "audio"; + #address-cells = <1>; + #size-cells = <0>; + + dfsdm0: filter@0 { + compatible = "st,stm32-dfsdm-dmic"; + reg = <0>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dmamux1 101 0x400 0x01>; + dma-names = "rx"; + #io-channel-cells = <1>; + st,adc-channels = <1>; + st,adc-channel-names = "dmic0"; + st,adc-channel-types = "SPI_R"; + st,adc-channel-clk-src = "CLKOUT"; + st,filter-order = <5>; + + asoc_pdm0: dfsdm-dai { + compatible = "st,stm32h7-dfsdm-dai"; + #sound-dai-cells = <0>; + io-channels = <&dfsdm0 0>; + }; + }; + + dfsdm_pdm1: filter@1 { + compatible = "st,stm32-dfsdm-adc"; + reg = <1>; + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dmamux1 102 0x400 0x01>; + dma-names = "rx"; + #io-channel-cells = <1>; + st,adc-channels = <2 3>; + st,adc-channel-names = "in2", "in3"; + st,adc-channel-types = "SPI_R", "SPI_R"; + st,adc-channel-clk-src = "CLKOUT_F", "CLKOUT_F"; + io-channels = <&sd_adc2 &sd_adc3>; + st,filter-order = <1>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.txt b/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.txt deleted file mode 100644 index c52ea2126eaa..000000000000 --- a/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.txt +++ /dev/null @@ -1,26 +0,0 @@ -* Plantower PMS7003 particulate matter sensor - -Required properties: -- compatible: must one of: - "plantower,pms1003" - "plantower,pms3003" - "plantower,pms5003" - "plantower,pms6003" - "plantower,pms7003" - "plantower,pmsa003" -- vcc-supply: phandle to the regulator that provides power to the sensor - -Optional properties: -- plantower,set-gpios: phandle to the GPIO connected to the SET line -- reset-gpios: phandle to the GPIO connected to the RESET line - -Refer to serial/slave-device.txt for generic serial attached device bindings. - -Example: - -&uart0 { - air-pollution-sensor { - compatible = "plantower,pms7003"; - vcc-supply = <®_vcc5v0>; - }; -}; diff --git a/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml b/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml new file mode 100644 index 000000000000..19e53930ebf6 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/chemical/plantower,pms7003.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Plantower PMS7003 air pollution sensor + +maintainers: + - Tomasz Duszynski <tduszyns@gmail.com> + +description: | + Air pollution sensor capable of measuring mass concentration of dust + particles. + +properties: + compatible: + enum: + - plantower,pms1003 + - plantower,pms3003 + - plantower,pms5003 + - plantower,pms6003 + - plantower,pms7003 + - plantower,pmsa003 + + vcc-supply: + description: regulator that provides power to the sensor + + plantower,set-gpios: + description: GPIO connected to the SET line + maxItems: 1 + + reset-gpios: + description: GPIO connected to the RESET line + maxItems: 1 + +required: + - compatible + - vcc-supply + +examples: + - | + serial { + air-pollution-sensor { + compatible = "plantower,pms7003"; + vcc-supply = <®_vcc5v0>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml b/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml new file mode 100644 index 000000000000..a285eaba7125 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +# Copyright 2019 Marcus Folkesson <marcus.folkesson@gmail.com> +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/iio/dac/lltc,ltc1660.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Linear Technology Micropower octal 8-Bit and 10-Bit DACs + +maintainers: + - Marcus Folkesson <marcus.folkesson@gmail.com> + +description: | + Bindings for the Linear Technology Micropower octal 8-Bit and 10-Bit DAC. + Datasheet can be found here: https://www.analog.com/media/en/technical-documentation/data-sheets/166560fa.pdf + +properties: + compatible: + enum: + - lltc,ltc1660 + - lltc,ltc1665 + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 5000000 + + vref-supply: + description: Phandle to the external reference voltage supply. + +required: + - compatible + - reg + - vref-supply + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + dac@0 { + compatible = "lltc,ltc1660"; + reg = <0>; + spi-max-frequency = <5000000>; + vref-supply = <&vref_reg>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/dac/ltc1660.txt b/Documentation/devicetree/bindings/iio/dac/ltc1660.txt deleted file mode 100644 index c5b5f22d6c64..000000000000 --- a/Documentation/devicetree/bindings/iio/dac/ltc1660.txt +++ /dev/null @@ -1,21 +0,0 @@ -* Linear Technology Micropower octal 8-Bit and 10-Bit DACs - -Required properties: - - compatible: Must be one of the following: - "lltc,ltc1660" - "lltc,ltc1665" - - reg: SPI chip select number for the device - - vref-supply: Phandle to the voltage reference supply - -Recommended properties: - - spi-max-frequency: Definition as per - Documentation/devicetree/bindings/spi/spi-bus.txt. - Max frequency for this chip is 5 MHz. - -Example: -dac@0 { - compatible = "lltc,ltc1660"; - reg = <0>; - spi-max-frequency = <5000000>; - vref-supply = <&vref_reg>; -}; diff --git a/Documentation/devicetree/bindings/iio/iio-bindings.txt b/Documentation/devicetree/bindings/iio/iio-bindings.txt index 68d6f8ce063b..af33267727f4 100644 --- a/Documentation/devicetree/bindings/iio/iio-bindings.txt +++ b/Documentation/devicetree/bindings/iio/iio-bindings.txt @@ -18,12 +18,17 @@ Required properties: with a single IIO output and 1 for nodes with multiple IIO outputs. +Optional properties: +label: A symbolic name for the device. + + Example for a simple configuration with no trigger: adc: voltage-sensor@35 { compatible = "maxim,max1139"; reg = <0x35>; #io-channel-cells = <1>; + label = "voltage_feedback_group1"; }; Example for a configuration with trigger: diff --git a/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml b/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml new file mode 100644 index 000000000000..0c53009ba7d6 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/imu/adi,adis16460.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices ADIS16460 and similar IMUs + +maintainers: + - Dragos Bogdan <dragos.bogdan@analog.com> + +description: | + Analog Devices ADIS16460 and similar IMUs + https://www.analog.com/media/en/technical-documentation/data-sheets/ADIS16460.pdf + +properties: + compatible: + enum: + - adi,adis16460 + + reg: + maxItems: 1 + + spi-cpha: true + + spi-cpol: true + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + spi0 { + #address-cells = <1>; + #size-cells = <0>; + + imu@0 { + compatible = "adi,adis16460"; + reg = <0>; + spi-max-frequency = <5000000>; + spi-cpol; + spi-cpha; + interrupt-parent = <&gpio0>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/imu/adi,adis16480.txt b/Documentation/devicetree/bindings/iio/imu/adi,adis16480.txt index ed7783f45233..cd903a1d880d 100644 --- a/Documentation/devicetree/bindings/iio/imu/adi,adis16480.txt +++ b/Documentation/devicetree/bindings/iio/imu/adi,adis16480.txt @@ -8,6 +8,7 @@ Required properties for the ADIS16480: * "adi,adis16480" * "adi,adis16485" * "adi,adis16488" + * "adi,adis16490" * "adi,adis16495-1" * "adi,adis16495-2" * "adi,adis16495-3" diff --git a/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt b/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt index 268bf7568e19..c5ee8a20af9f 100644 --- a/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt +++ b/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt @@ -21,6 +21,7 @@ Required properties: bindings. Optional properties: + - vdd-supply: regulator phandle for VDD supply - vddio-supply: regulator phandle for VDDIO supply - mount-matrix: an optional 3x3 mounting rotation matrix - i2c-gate node. These devices also support an auxiliary i2c bus. This is diff --git a/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml b/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml new file mode 100644 index 000000000000..63bcb73ae309 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/imu/nxp,fxos8700.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale FXOS8700 Inertial Measurement Unit + +maintainers: + - Robert Jones <rjones@gateworks.com> + +description: | + Accelerometer and magnetometer combo device with an i2c and SPI interface. + https://www.nxp.com/products/sensors/motion-sensors/6-axis/digital-motion-sensor-3d-accelerometer-2g-4g-8g-plus-3d-magnetometer:FXOS8700CQ + +properties: + compatible: + enum: + - nxp,fxos8700 + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 2 + + interrupt-names: + minItems: 1 + maxItems: 2 + items: + enum: + - INT1 + - INT2 + + drive-open-drain: + type: boolean + +required: + - compatible + - reg + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + fxos8700@1e { + compatible = "nxp,fxos8700"; + reg = <0x1e>; + + interrupt-parent = <&gpio2>; + interrupts = <7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "INT1"; + }; + }; + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + spi0 { + #address-cells = <1>; + #size-cells = <0>; + + fxos8700@0 { + compatible = "nxp,fxos8700"; + reg = <0>; + + spi-max-frequency = <1000000>; + interrupt-parent = <&gpio1>; + interrupts = <7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "INT2"; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt index efec9ece034a..cef4bc16fce1 100644 --- a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt +++ b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt @@ -11,6 +11,11 @@ Required properties: "st,asm330lhh" "st,lsm6dsox" "st,lsm6dsr" + "st,lsm6ds3tr-c" + "st,ism330dhcx" + "st,lsm9ds1-imu" + "st,lsm6ds0" + "st,lsm6dsrx" - reg: i2c address of the sensor / spi cs line Optional properties: @@ -28,6 +33,7 @@ Optional properties: - interrupts: interrupt mapping for IRQ. It should be configured with flags IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_RISING, IRQ_TYPE_LEVEL_LOW or IRQ_TYPE_EDGE_FALLING. +- wakeup-source: Enables wake up of host system on event. Refer to interrupt-controller/interrupts.txt for generic interrupt client node bindings. diff --git a/Documentation/devicetree/bindings/iio/light/adux1020.yaml b/Documentation/devicetree/bindings/iio/light/adux1020.yaml new file mode 100644 index 000000000000..69bd5c06319d --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/adux1020.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/light/adux1020.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices ADUX1020 Photometric sensor + +maintainers: + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + +description: | + Photometric sensor over an i2c interface. + https://www.analog.com/media/en/technical-documentation/data-sheets/ADUX1020.pdf + +properties: + compatible: + enum: + - adi,adux1020 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + + #address-cells = <1>; + #size-cells = <0>; + + adux1020@64 { + compatible = "adi,adux1020"; + reg = <0x64>; + interrupt-parent = <&msmgpio>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/light/bh1750.txt b/Documentation/devicetree/bindings/iio/light/bh1750.txt deleted file mode 100644 index 1e7685797d7a..000000000000 --- a/Documentation/devicetree/bindings/iio/light/bh1750.txt +++ /dev/null @@ -1,18 +0,0 @@ -ROHM BH1750 - ALS, Ambient light sensor - -Required properties: - -- compatible: Must be one of: - "rohm,bh1710" - "rohm,bh1715" - "rohm,bh1721" - "rohm,bh1750" - "rohm,bh1751" -- reg: the I2C address of the sensor - -Example: - -light-sensor@23 { - compatible = "rohm,bh1750"; - reg = <0x23>; -}; diff --git a/Documentation/devicetree/bindings/iio/light/bh1750.yaml b/Documentation/devicetree/bindings/iio/light/bh1750.yaml new file mode 100644 index 000000000000..1cc60d7ecfa0 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/bh1750.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/light/bh1750.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROHM BH1750 ambient light sensor + +maintainers: + - Tomasz Duszynski <tduszyns@gmail.com> + +description: | + Ambient light sensor with an i2c interface. + +properties: + compatible: + enum: + - rohm,bh1710 + - rohm,bh1715 + - rohm,bh1721 + - rohm,bh1750 + - rohm,bh1751 + + reg: + maxItems: 1 + +required: + - compatible + - reg + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + light-sensor@23 { + compatible = "rohm,bh1750"; + reg = <0x23>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/iio/light/noa1305.yaml b/Documentation/devicetree/bindings/iio/light/noa1305.yaml new file mode 100644 index 000000000000..17e7f140b69b --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/noa1305.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/light/noa1305.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ON Semiconductor NOA1305 Ambient Light Sensor + +maintainers: + - Martyn Welch <martyn.welch@collabora.com> + +description: | + Ambient sensing with an i2c interface. + + https://www.onsemi.com/pub/Collateral/NOA1305-D.PDF + +properties: + compatible: + enum: + - onnn,noa1305 + + reg: + maxItems: 1 + + vin-supply: + description: Regulator that provides power to the sensor + +required: + - compatible + - reg + +examples: + - | + i2c { + + #address-cells = <1>; + #size-cells = <0>; + + light@39 { + compatible = "onnn,noa1305"; + reg = <0x39>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/light/isl29501.txt b/Documentation/devicetree/bindings/iio/light/renesas,isl29501.txt index 46957997fee3..46957997fee3 100644 --- a/Documentation/devicetree/bindings/iio/light/isl29501.txt +++ b/Documentation/devicetree/bindings/iio/light/renesas,isl29501.txt diff --git a/Documentation/devicetree/bindings/iio/light/stk33xx.yaml b/Documentation/devicetree/bindings/iio/light/stk33xx.yaml new file mode 100644 index 000000000000..aae8a6d627c9 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/stk33xx.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/light/stk33xx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: | + Sensortek STK33xx I2C Ambient Light and Proximity sensor + +maintainers: + - Jonathan Cameron <jic23@kernel.org> + +description: | + Ambient light and proximity sensor over an i2c interface. + +properties: + compatible: + enum: + - sensortek,stk3310 + - sensortek,stk3311 + - sensortek,stk3335 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + + #address-cells = <1>; + #size-cells = <0>; + + stk3310@48 { + compatible = "sensortek,stk3310"; + reg = <0x48>; + interrupt-parent = <&gpio1>; + interrupts = <5 IRQ_TYPE_LEVEL_LOW>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/light/veml6030.yaml b/Documentation/devicetree/bindings/iio/light/veml6030.yaml new file mode 100644 index 000000000000..0ff9b11f9d18 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/veml6030.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: GPL-2.0+ +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/light/veml6030.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: VEML6030 Ambient Light Sensor (ALS) + +maintainers: + - Rishi Gupta <gupt21@gmail.com> + +description: | + Bindings for the ambient light sensor veml6030 from Vishay + Semiconductors over an i2c interface. + + Irrespective of whether interrupt is used or not, application + can get the ALS and White channel reading from IIO raw interface. + + If the interrupts are used, application will receive an IIO event + whenever configured threshold is crossed. + + Specifications about the sensor can be found at: + https://www.vishay.com/docs/84366/veml6030.pdf + +properties: + compatible: + enum: + - vishay,veml6030 + + reg: + description: + I2C address of the device. + enum: + - 0x10 # ADDR pin pulled down + - 0x48 # ADDR pin pulled up + + interrupts: + description: + interrupt mapping for IRQ. Configure with IRQ_TYPE_LEVEL_LOW. + Refer to interrupt-controller/interrupts.txt for generic + interrupt client node bindings. + maxItems: 1 + +required: + - compatible + - reg + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + light-sensor@10 { + compatible = "vishay,veml6030"; + reg = <0x10>; + interrupts = <12 IRQ_TYPE_LEVEL_LOW>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/mount-matrix.txt b/Documentation/devicetree/bindings/iio/mount-matrix.txt new file mode 100644 index 000000000000..c3344ab509a3 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/mount-matrix.txt @@ -0,0 +1,203 @@ +For discussion. Unclear are: +* is the definition of +/- values practical or counterintuitive? +* are the definitions unambiguous and easy to follow? +* are the examples correct? +* should we have HOWTO engineer a correct matrix for a new device (without comparing to a different one)? + +==== + + +Mounting matrix + +The mounting matrix is a device tree property used to orient any device +that produce three-dimensional data in relation to the world where it is +deployed. + +The purpose of the mounting matrix is to translate the sensor frame of +reference into the device frame of reference using a translation matrix as +defined in linear algebra. + +The typical usecase is that where a component has an internal representation +of the (x,y,z) triplets, such as different registers to read these coordinates, +and thus implying that the component should be mounted in a certain orientation +relative to some specific device frame of reference. + +For example a device with some kind of screen, where the user is supposed to +interact with the environment using an accelerometer, gyroscope or magnetometer +mounted on the same chassis as this screen, will likely take the screen as +reference to (x,y,z) orientation, with (x,y) corresponding to these axes on the +screen and (z) being depth, the axis perpendicular to the screen. + +For a screen you probably want (x) coordinates to go from negative on the left +to positive on the right, (y) from negative on the bottom to positive on top +and (z) depth to be negative under the screen and positive in front of it, +toward the face of the user. + +A sensor can be mounted in any angle along the axes relative to the frame of +reference. This means that the sensor may be flipped upside-down, left-right, +or tilted at any angle relative to the frame of reference. + +Another frame of reference is how the device with its sensor relates to the +external world, the environment where the device is deployed. Usually the data +from the sensor is used to figure out how the device is oriented with respect +to this world. When using the mounting matrix, the sensor and device orientation +becomes identical and we can focus on the data as it relates to the surrounding +world. + +Device-to-world examples for some three-dimensional sensor types: + +- Accelerometers have their world frame of reference toward the center of + gravity, usually to the core of the planet. A reading of the (x,y,z) values + from the sensor will give a projection of the gravity vector through the + device relative to the center of the planet, i.e. relative to its surface at + this point. Up and down in the world relative to the device frame of + reference can thus be determined. and users would likely expect a value of + 9.81 m/s^2 upwards along the (z) axis, i.e. out of the screen when the device + is held with its screen flat on the planets surface and 0 on the other axes, + as the gravity vector is projected 1:1 onto the sensors (z)-axis. + + If you tilt the device, the g vector virtually coming out of the display + is projected onto the (x,y) plane of the display panel. + + Example: + + ^ z: +g ^ z: > 0 + ! /! + ! x=y=0 / ! x: > 0 + +--------+ +--------+ + ! ! ! ! + +--------+ +--------+ + ! / + ! / + v v + center of center of + gravity gravity + + + If the device is tilted to the left, you get a positive x value. If you point + its top towards surface, you get a negative y axis. + + (---------) + ! ! y: -g + ! ! ^ + ! ! ! + ! ! + ! ! x: +g <- z: +g -> x: -g + ! 1 2 3 ! + ! 4 5 6 ! ! + ! 7 8 9 ! v + ! * 0 # ! y: +g + (---------) + + +- Magnetometers (compasses) have their world frame of reference relative to the + geomagnetic field. The system orientation vis-a-vis the world is defined with + respect to the local earth geomagnetic reference frame where (y) is in the + ground plane and positive towards magnetic North, (x) is in the ground plane, + perpendicular to the North axis and positive towards the East and (z) is + perpendicular to the ground plane and positive upwards. + + + ^^^ North: y > 0 + + (---------) + ! ! + ! ! + ! ! + ! ! > + ! ! > North: x > 0 + ! 1 2 3 ! > + ! 4 5 6 ! + ! 7 8 9 ! + ! * 0 # ! + (---------) + + Since the geomagnetic field is not uniform this definition fails if we come + closer to the poles. + + Sensors and driver can not and should not take care of this because there + are complex calculations and empirical data to be taken care of. We leave + this up to user space. + + The definition we take: + + If the device is placed at the equator and the top is pointing north, the + display is readable by a person standing upright on the earth surface, this + defines a positive y value. + + +- Gyroscopes detects the movement relative the device itself. The angular + velocity is defined as orthogonal to the plane of rotation, so if you put the + device on a flat surface and spin it around the z axis (such as rotating a + device with a screen lying flat on a table), you should get a negative value + along the (z) axis if rotated clockwise, and a positive value if rotated + counter-clockwise according to the right-hand rule. + + + (---------) y > 0 + ! ! v---\ + ! ! + ! ! + ! ! <--\ + ! ! ! z > 0 + ! 1 2 3 ! --/ + ! 4 5 6 ! + ! 7 8 9 ! + ! * 0 # ! + (---------) + + +So unless the sensor is ideally mounted, we need a means to indicate the +relative orientation of any given sensor of this type with respect to the +frame of reference. + +To achieve this, use the device tree property "mount-matrix" for the sensor. + +This supplies a 3x3 rotation matrix in the strict linear algebraic sense, +to orient the senor axes relative to a desired point of reference. This means +the resulting values from the sensor, after scaling to proper units, should be +multiplied by this matrix to give the proper vectors values in three-dimensional +space, relative to the device or world point of reference. + +For more information, consult: +https://en.wikipedia.org/wiki/Rotation_matrix + +The mounting matrix has the layout: + + (mxx, myx, mzx) + (mxy, myy, mzy) + (mxz, myz, mzz) + +Values are intended to be multiplied as: + + x' = mxx * x + myx * y + mzx * z + y' = mxy * x + myy * y + mzy * z + z' = mxz * x + myz * y + mzz * z + +It is represented as an array of strings containing the real values for +producing the transformation matrix. + +Examples: + +Identity matrix (nothing happens to the coordinates, which means the device was +mechanically mounted in an ideal way and we need no transformation): + +mount-matrix = "1", "0", "0", + "0", "1", "0", + "0", "0", "1"; + +The sensor is mounted 30 degrees (Pi/6 radians) tilted along the X axis, so we +compensate by performing a -30 degrees rotation around the X axis: + +mount-matrix = "1", "0", "0", + "0", "0.866", "0.5", + "0", "-0.5", "0.866"; + +The sensor is flipped 180 degrees (Pi radians) around the Z axis, i.e. mounted +upside-down: + +mount-matrix = "0.998", "0.054", "0", + "-0.054", "0.998", "0", + "0", "0", "1"; + +???: this does not match "180 degrees" - factors indicate ca. 3 degrees compensation diff --git a/Documentation/devicetree/bindings/iio/potentiometer/max5432.yaml b/Documentation/devicetree/bindings/iio/potentiometer/max5432.yaml new file mode 100644 index 000000000000..5082f919df2a --- /dev/null +++ b/Documentation/devicetree/bindings/iio/potentiometer/max5432.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/potentiometer/max5432.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim Integrated MAX5432-MAX5435 Digital Potentiometers + +maintainers: + - Martin Kaiser <martin@kaiser.cx> + +description: | + Maxim Integrated MAX5432-MAX5435 Digital Potentiometers connected via I2C + + Datasheet: + https://datasheets.maximintegrated.com/en/ds/MAX5432-MAX5435.pdf + +properties: + compatible: + enum: + - maxim,max5432 + - maxim,max5433 + - maxim,max5434 + - maxim,max5435 + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + max5434@28 { + compatible = "maxim,max5434"; + reg = <0x28>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml new file mode 100644 index 000000000000..9f5ca9c42025 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/pressure/asc,dlhl60d.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: All Sensors DLH series low voltage digital pressure sensors + +maintainers: + - Tomislav Denis <tomislav.denis@avl.com> + +description: | + Bindings for the All Sensors DLH series pressure sensors. + + Specifications about the sensors can be found at: + http://www.allsensors.com/cad/DS-0355_Rev_B.PDF + +properties: + compatible: + enum: + - asc,dlhl60d + - asc,dlhl60g + + reg: + description: I2C device address + maxItems: 1 + + interrupts: + description: interrupt mapping for EOC(data ready) pin + maxItems: 1 + +required: + - compatible + - reg + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + pressure@29 { + compatible = "asc,dlhl60d"; + reg = <0x29>; + interrupt-parent = <&gpio0>; + interrupts = <10 IRQ_TYPE_EDGE_RISING>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml index c6721a7e8938..519137e5c170 100644 --- a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml +++ b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml @@ -28,12 +28,10 @@ properties: vddd-supply: description: digital voltage regulator (see regulator/regulator.txt) - maxItems: 1 vdda-supply: description: analog voltage regulator (see regulator/regulator.txt) - maxItems: 1 reset-gpios: description: diff --git a/Documentation/devicetree/bindings/iio/proximity/maxbotix,mb1232.txt b/Documentation/devicetree/bindings/iio/proximity/maxbotix,mb1232.txt deleted file mode 100644 index dd1058fbe9c3..000000000000 --- a/Documentation/devicetree/bindings/iio/proximity/maxbotix,mb1232.txt +++ /dev/null @@ -1,29 +0,0 @@ -* MaxBotix I2CXL-MaxSonar ultrasonic distance sensor of type mb1202, - mb1212, mb1222, mb1232, mb1242, mb7040 or mb7137 using the i2c interface - for ranging - -Required properties: - - compatible: "maxbotix,mb1202", - "maxbotix,mb1212", - "maxbotix,mb1222", - "maxbotix,mb1232", - "maxbotix,mb1242", - "maxbotix,mb7040" or - "maxbotix,mb7137" - - - reg: i2c address of the device, see also i2c/i2c.txt - -Optional properties: - - interrupts: Interrupt used to announce the preceding reading - request has finished and that data is available. - If no interrupt is specified the device driver - falls back to wait a fixed amount of time until - data can be retrieved. - -Example: -proximity@70 { - compatible = "maxbotix,mb1232"; - reg = <0x70>; - interrupt-parent = <&gpio2>; - interrupts = <2 IRQ_TYPE_EDGE_FALLING>; -}; diff --git a/Documentation/devicetree/bindings/iio/proximity/maxbotix,mb1232.yaml b/Documentation/devicetree/bindings/iio/proximity/maxbotix,mb1232.yaml new file mode 100644 index 000000000000..3eac248f291d --- /dev/null +++ b/Documentation/devicetree/bindings/iio/proximity/maxbotix,mb1232.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/proximity/maxbotix,mb1232.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MaxBotix I2CXL-MaxSonar ultrasonic distance sensor + +maintainers: + - Andreas Klinger <ak@it-klinger.de> + +description: | + MaxBotix I2CXL-MaxSonar ultrasonic distance sensor of type mb1202, + mb1212, mb1222, mb1232, mb1242, mb7040 or mb7137 using the i2c interface + for ranging + + Specifications about the devices can be found at: + https://www.maxbotix.com/documents/I2CXL-MaxSonar-EZ_Datasheet.pdf + +properties: + compatible: + enum: + - maxbotix,mb1202 + - maxbotix,mb1212 + - maxbotix,mb1222 + - maxbotix,mb1232 + - maxbotix,mb1242 + - maxbotix,mb7040 + - maxbotix,mb7137 + + reg: + maxItems: 1 + + interrupts: + description: + Interrupt used to announce the preceding reading request has finished + and that data is available. If no interrupt is specified the device + driver falls back to wait a fixed amount of time until data can be + retrieved. + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + proximity@70 { + compatible = "maxbotix,mb1232"; + reg = <0x70>; + interrupt-parent = <&gpio2>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/proximity/parallax-ping.yaml b/Documentation/devicetree/bindings/iio/proximity/parallax-ping.yaml new file mode 100644 index 000000000000..a079c9921af6 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/proximity/parallax-ping.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/proximity/parallax-ping.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Parallax PING))) and LaserPING range finder + +maintainers: + - Andreas Klinger <ak@it-klinger.de> + +description: | + Bit-banging driver using one GPIO: + - ping-gpios is raised by the driver to start measurement + - direction of ping-gpio is then switched into input with an interrupt + for receiving distance value as PWM signal + + Specifications about the devices can be found at: + http://parallax.com/sites/default/files/downloads/28041-LaserPING-2m-Rangefinder-Guide.pdf + http://parallax.com/sites/default/files/downloads/28015-PING-Documentation-v1.6.pdf + +properties: + compatible: + enum: + - parallax,ping + - parallax,laserping + + ping-gpios: + description: + Definition of the GPIO for the triggering and echo (output and input) + This GPIO is set for about 5 us by the driver to tell the device it + should initiate the measurement cycle. Afterwards the GPIO is switched + to input direction with an interrupt. The device sets it and the + length of the input signal corresponds to the measured distance. + It needs to be an GPIO which is able to deliver an interrupt because + the time between two interrupts is measured in the driver. + See Documentation/devicetree/bindings/gpio/gpio.txt for information + on how to specify a consumer gpio. + maxItems: 1 + +required: + - compatible + - ping-gpios + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + proximity { + compatible = "parallax,laserping"; + ping-gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml new file mode 100644 index 000000000000..d4922f9f0376 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml @@ -0,0 +1,480 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/temperature/adi,ltc2983.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices LTC2983 Multi-sensor Temperature system + +maintainers: + - Nuno Sá <nuno.sa@analog.com> + +description: | + Analog Devices LTC2983 Multi-Sensor Digital Temperature Measurement System + https://www.analog.com/media/en/technical-documentation/data-sheets/2983fc.pdf + +properties: + compatible: + enum: + - adi,ltc2983 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + adi,mux-delay-config-us: + description: + The LTC2983 performs 2 or 3 internal conversion cycles per temperature + result. Each conversion cycle is performed with different excitation and + input multiplexer configurations. Prior to each conversion, these + excitation circuits and input switch configurations are changed and an + internal 1ms delay ensures settling prior to the conversion cycle in most + cases. An extra delay can be configured using this property. The value is + rounded to nearest 100us. + maximum: 255 + + adi,filter-notch-freq: + description: + Set's the default setting of the digital filter. The default is + simultaneous 50/60Hz rejection. + 0 - 50/60Hz rejection + 1 - 60Hz rejection + 2 - 50Hz rejection + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - minimum: 0 + maximum: 2 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +patternProperties: + "@([1-9]|1[0-9]|20)$": + type: object + + properties: + reg: + description: + The channel number. It can be connected to one of the 20 channels of + the device. + minimum: 1 + maximum: 20 + + adi,sensor-type: + description: Identifies the type of sensor connected to the device. + $ref: /schemas/types.yaml#/definitions/uint32 + + required: + - reg + - adi,sensor-type + + "^thermocouple@": + type: object + description: + Represents a thermocouple sensor which is connected to one of the device + channels. + + properties: + adi,sensor-type: + description: | + 1 - Type J Thermocouple + 2 - Type K Thermocouple + 3 - Type E Thermocouple + 4 - Type N Thermocouple + 5 - Type R Thermocouple + 6 - Type S Thermocouple + 7 - Type T Thermocouple + 8 - Type B Thermocouple + 9 - Custom Thermocouple + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 9 + + adi,single-ended: + description: + Boolean property which set's the thermocouple as single-ended. + type: boolean + + adi,sensor-oc-current-microamp: + description: + This property set's the pulsed current value applied during + open-circuit detect. + enum: [10, 100, 500, 1000] + + adi,cold-junction-handle: + description: + Phandle which points to a sensor object responsible for measuring + the thermocouple cold junction temperature. + $ref: "/schemas/types.yaml#/definitions/phandle" + + adi,custom-thermocouple: + description: + This is a table, where each entry should be a pair of + voltage(mv)-temperature(K). The entries must be given in nv and uK + so that, the original values must be multiplied by 1000000. For + more details look at table 69 and 70. + Note should be signed, but dtc doesn't currently maintain the + sign. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint64-matrix + items: + minItems: 3 + maxItems: 64 + items: + minItems: 2 + maxItems: 2 + + "^diode@": + type: object + description: + Represents a diode sensor which is connected to one of the device + channels. + + properties: + adi,sensor-type: + description: Identifies the sensor as a diode. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + const: 28 + + adi,single-ended: + description: Boolean property which set's the diode as single-ended. + type: boolean + + adi,three-conversion-cycles: + description: + Boolean property which set's three conversion cycles removing + parasitic resistance effects between the LTC2983 and the diode. + type: boolean + + adi,average-on: + description: + Boolean property which enables a running average of the diode + temperature reading. This reduces the noise when the diode is used + as a cold junction temperature element on an isothermal block + where temperatures change slowly. + type: boolean + + adi,excitation-current-microamp: + description: + This property controls the magnitude of the excitation current + applied to the diode. Depending on the number of conversions + cycles, this property will assume different predefined values on + each cycle. Just set the value of the first cycle (1l). + enum: [10, 20, 40, 80] + + adi,ideal-factor-value: + description: + This property sets the diode ideality factor. The real value must + be multiplied by 1000000 to remove the fractional part. For more + information look at table 20 of the datasheet. + $ref: /schemas/types.yaml#/definitions/uint32 + + "^rtd@": + type: object + description: + Represents a rtd sensor which is connected to one of the device channels. + + properties: + reg: + minimum: 2 + maximum: 20 + + adi,sensor-type: + description: | + 10 - RTD PT-10 + 11 - RTD PT-50 + 12 - RTD PT-100 + 13 - RTD PT-200 + 14 - RTD PT-500 + 15 - RTD PT-1000 + 16 - RTD PT-1000 (0.00375) + 17 - RTD NI-120 + 18 - RTD Custom + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 10 + maximum: 18 + + adi,rsense-handle: + description: + Phandle pointing to a rsense object associated with this RTD. + $ref: "/schemas/types.yaml#/definitions/phandle" + + adi,number-of-wires: + description: + Identifies the number of wires used by the RTD. Setting this + property to 5 means 4 wires with Kelvin Rsense. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [2, 3, 4, 5] + + adi,rsense-share: + description: + Boolean property which enables Rsense sharing, where one sense + resistor is used for multiple 2-, 3-, and/or 4-wire RTDs. + type: boolean + + adi,current-rotate: + description: + Boolean property which enables excitation current rotation to + automatically remove parasitic thermocouple effects. Note that + this property is not allowed for 2- and 3-wire RTDs. + type: boolean + + adi,excitation-current-microamp: + description: + This property controls the magnitude of the excitation current + applied to the RTD. + enum: [5, 10, 25, 50, 100, 250, 500, 1000] + + adi,rtd-curve: + description: + This property set the RTD curve used and the corresponding + Callendar-VanDusen constants. Look at table 30 of the datasheet. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - minimum: 0 + maximum: 3 + + adi,custom-rtd: + description: + This is a table, where each entry should be a pair of + resistance(ohm)-temperature(K). The entries added here are in uohm + and uK. For more details values look at table 74 and 75. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint64-matrix + items: + minItems: 3 + maxItems: 64 + items: + minItems: 2 + maxItems: 2 + + required: + - adi,rsense-handle + + dependencies: + adi,current-rotate: [ adi,rsense-share ] + + "^thermistor@": + type: object + description: + Represents a thermistor sensor which is connected to one of the device + channels. + + properties: + adi,sensor-type: + description: + 19 - Thermistor 44004/44033 2.252kohm at 25°C + 20 - Thermistor 44005/44030 3kohm at 25°C + 21 - Thermistor 44007/44034 5kohm at 25°C + 22 - Thermistor 44006/44031 10kohm at 25°C + 23 - Thermistor 44008/44032 30kohm at 25°C + 24 - Thermistor YSI 400 2.252kohm at 25°C + 25 - Thermistor Spectrum 1003k 1kohm + 26 - Thermistor Custom Steinhart-Hart + 27 - Custom Thermistor + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 19 + maximum: 27 + + adi,rsense-handle: + description: + Phandle pointing to a rsense object associated with this + thermistor. + $ref: "/schemas/types.yaml#/definitions/phandle" + + adi,single-ended: + description: + Boolean property which set's the thermistor as single-ended. + type: boolean + + adi,rsense-share: + description: + Boolean property which enables Rsense sharing, where one sense + resistor is used for multiple thermistors. Note that this property + is ignored if adi,single-ended is set. + type: boolean + + adi,current-rotate: + description: + Boolean property which enables excitation current rotation to + automatically remove parasitic thermocouple effects. + type: boolean + + adi,excitation-current-nanoamp: + description: + This property controls the magnitude of the excitation current + applied to the thermistor. Value 0 set's the sensor in auto-range + mode. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [0, 250, 500, 1000, 5000, 10000, 25000, 50000, 100000, + 250000, 500000, 1000000] + + adi,custom-thermistor: + description: + This is a table, where each entry should be a pair of + resistance(ohm)-temperature(K). The entries added here are in uohm + and uK only for custom thermistors. For more details look at table + 78 and 79. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint64-matrix + items: + minItems: 3 + maxItems: 64 + items: + minItems: 2 + maxItems: 2 + + adi,custom-steinhart: + description: + Steinhart-Hart coefficients are also supported and can + be programmed into the device memory using this property. For + Steinhart sensors the coefficients are given in the raw + format. Look at table 82 for more information. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + items: + minItems: 6 + maxItems: 6 + + required: + - adi,rsense-handle + + dependencies: + adi,current-rotate: [ adi,rsense-share ] + + "^adc@": + type: object + description: Represents a channel which is being used as a direct adc. + + properties: + adi,sensor-type: + description: Identifies the sensor as a direct adc. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + const: 30 + + adi,single-ended: + description: Boolean property which set's the adc as single-ended. + type: boolean + + "^rsense@": + type: object + description: + Represents a rsense which is connected to one of the device channels. + Rsense are used by thermistors and RTD's. + + properties: + reg: + minimum: 2 + maximum: 20 + + adi,sensor-type: + description: Identifies the sensor as a rsense. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + const: 29 + + adi,rsense-val-milli-ohms: + description: + Sets the value of the sense resistor. Look at table 20 of the + datasheet for information. + + required: + - adi,rsense-val-milli-ohms + +required: + - compatible + - reg + - interrupts + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + + sensor_ltc2983: ltc2983@0 { + compatible = "adi,ltc2983"; + reg = <0>; + + #address-cells = <1>; + #size-cells = <0>; + + interrupts = <20 IRQ_TYPE_EDGE_RISING>; + interrupt-parent = <&gpio>; + + thermocouple@18 { + reg = <18>; + adi,sensor-type = <8>; //Type B + adi,sensor-oc-current-microamp = <10>; + adi,cold-junction-handle = <&diode5>; + }; + + diode5: diode@5 { + reg = <5>; + adi,sensor-type = <28>; + }; + + rsense2: rsense@2 { + reg = <2>; + adi,sensor-type = <29>; + adi,rsense-val-milli-ohms = <1200000>; //1.2Kohms + }; + + rtd@14 { + reg = <14>; + adi,sensor-type = <15>; //PT1000 + /*2-wire, internal gnd, no current rotation*/ + adi,number-of-wires = <2>; + adi,rsense-share; + adi,excitation-current-microamp = <500>; + adi,rsense-handle = <&rsense2>; + }; + + adc@10 { + reg = <10>; + adi,sensor-type = <30>; + adi,single-ended; + }; + + thermistor@12 { + reg = <12>; + adi,sensor-type = <26>; //Steinhart + adi,rsense-handle = <&rsense2>; + adi,custom-steinhart = <0x00F371EC 0x12345678 + 0x2C0F8733 0x10018C66 0xA0FEACCD + 0x90021D99>; //6 entries + }; + + thermocouple@20 { + reg = <20>; + adi,sensor-type = <9>; //custom thermocouple + adi,single-ended; + adi,custom-thermocouple = /bits/ 64 + <(-50220000) 0 + (-30200000) 99100000 + (-5300000) 135400000 + 0 273150000 + 40200000 361200000 + 55300000 522100000 + 88300000 720300000 + 132200000 811200000 + 188700000 922500000 + 460400000 1000000000>; //10 pairs + }; + + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/temperature/maxim_thermocouple.txt b/Documentation/devicetree/bindings/iio/temperature/maxim_thermocouple.txt index 28bc5c4d965b..bb85cd0e039c 100644 --- a/Documentation/devicetree/bindings/iio/temperature/maxim_thermocouple.txt +++ b/Documentation/devicetree/bindings/iio/temperature/maxim_thermocouple.txt @@ -5,7 +5,10 @@ Maxim thermocouple support Required properties: - - compatible: must be "maxim,max31855" or "maxim,max6675" + - compatible: must be "maxim,max6675" or one of the following: + "maxim,max31855k", "maxim,max31855j", "maxim,max31855n", + "maxim,max31855s", "maxim,max31855t", "maxim,max31855e", + "maxim,max31855r"; the generic "max,max31855" is deprecated. - reg: SPI chip select number for the device - spi-max-frequency: must be 4300000 - spi-cpha: must be defined for max6675 to enable SPI mode 1 @@ -15,7 +18,7 @@ Required properties: Example: max31855@0 { - compatible = "maxim,max31855"; + compatible = "maxim,max31855k"; reg = <0>; spi-max-frequency = <4300000>; }; diff --git a/Documentation/devicetree/bindings/iio/timer/stm32-lptimer-trigger.txt b/Documentation/devicetree/bindings/iio/timer/stm32-lptimer-trigger.txt deleted file mode 100644 index 85e6806b17d7..000000000000 --- a/Documentation/devicetree/bindings/iio/timer/stm32-lptimer-trigger.txt +++ /dev/null @@ -1,23 +0,0 @@ -STMicroelectronics STM32 Low-Power Timer Trigger - -STM32 Low-Power Timer provides trigger source (LPTIM output) that can be used -by STM32 internal ADC and/or DAC. - -Must be a sub-node of an STM32 Low-Power Timer device tree node. -See ../mfd/stm32-lptimer.txt for details about the parent node. - -Required properties: -- compatible: Must be "st,stm32-lptimer-trigger". -- reg: Identify trigger hardware block. Must be 0, 1 or 2 - respectively for lptimer1, lptimer2 or lptimer3 - trigger output. - -Example: - timer@40002400 { - compatible = "st,stm32-lptimer"; - ... - trigger@0 { - compatible = "st,stm32-lptimer-trigger"; - reg = <0>; - }; - }; diff --git a/Documentation/devicetree/bindings/iio/timer/stm32-timer-trigger.txt b/Documentation/devicetree/bindings/iio/timer/stm32-timer-trigger.txt deleted file mode 100644 index b8e8c769d434..000000000000 --- a/Documentation/devicetree/bindings/iio/timer/stm32-timer-trigger.txt +++ /dev/null @@ -1,25 +0,0 @@ -STMicroelectronics STM32 Timers IIO timer bindings - -Must be a sub-node of an STM32 Timers device tree node. -See ../mfd/stm32-timers.txt for details about the parent node. - -Required parameters: -- compatible: Must be one of: - "st,stm32-timer-trigger" - "st,stm32h7-timer-trigger" -- reg: Identify trigger hardware block. - -Example: - timers@40010000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "st,stm32-timers"; - reg = <0x40010000 0x400>; - clocks = <&rcc 0 160>; - clock-names = "int"; - - timer@0 { - compatible = "st,stm32-timer-trigger"; - reg = <0>; - }; - }; |
