diff options
Diffstat (limited to 'Documentation/devicetree/bindings/gpu')
12 files changed, 659 insertions, 417 deletions
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.txt b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.txt deleted file mode 100644 index b8be9dbc68b4..000000000000 --- a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.txt +++ /dev/null @@ -1,92 +0,0 @@ -ARM Mali Bifrost GPU -==================== - -Required properties: - -- compatible : - * Since Mali Bifrost GPU model/revision is fully discoverable by reading - some determined registers, must contain the following: - + "arm,mali-bifrost" - * which must be preceded by one of the following vendor specifics: - + "amlogic,meson-g12a-mali" - -- reg : Physical base address of the device and length of the register area. - -- interrupts : Contains the three IRQ lines required by Mali Bifrost devices, - in the following defined order. - -- interrupt-names : Contains the names of IRQ resources in this exact defined - order: "job", "mmu", "gpu". - -Optional properties: - -- clocks : Phandle to clock for the Mali Bifrost device. - -- mali-supply : Phandle to regulator for the Mali device. Refer to - Documentation/devicetree/bindings/regulator/regulator.txt for details. - -- operating-points-v2 : Refer to Documentation/devicetree/bindings/opp/opp.txt - for details. - -- resets : Phandle of the GPU reset line. - -Vendor-specific bindings ------------------------- - -The Mali GPU is integrated very differently from one SoC to -another. In order to accommodate those differences, you have the option -to specify one more vendor-specific compatible, among: - -- "amlogic,meson-g12a-mali" - Required properties: - - resets : Should contain phandles of : - + GPU reset line - + GPU APB glue reset line - -Example for a Mali-G31: - -gpu@ffa30000 { - compatible = "amlogic,meson-g12a-mali", "arm,mali-bifrost"; - reg = <0xffe40000 0x10000>; - interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "job", "mmu", "gpu"; - clocks = <&clk CLKID_MALI>; - mali-supply = <&vdd_gpu>; - operating-points-v2 = <&gpu_opp_table>; - resets = <&reset RESET_DVALIN_CAPB3>, <&reset RESET_DVALIN>; -}; - -gpu_opp_table: opp_table0 { - compatible = "operating-points-v2"; - - opp@533000000 { - opp-hz = /bits/ 64 <533000000>; - opp-microvolt = <1250000>; - }; - opp@450000000 { - opp-hz = /bits/ 64 <450000000>; - opp-microvolt = <1150000>; - }; - opp@400000000 { - opp-hz = /bits/ 64 <400000000>; - opp-microvolt = <1125000>; - }; - opp@350000000 { - opp-hz = /bits/ 64 <350000000>; - opp-microvolt = <1075000>; - }; - opp@266000000 { - opp-hz = /bits/ 64 <266000000>; - opp-microvolt = <1025000>; - }; - opp@160000000 { - opp-hz = /bits/ 64 <160000000>; - opp-microvolt = <925000>; - }; - opp@100000000 { - opp-hz = /bits/ 64 <100000000>; - opp-microvolt = <912500>; - }; -}; diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml new file mode 100644 index 000000000000..4ea6a8789699 --- /dev/null +++ b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml @@ -0,0 +1,117 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpu/arm,mali-bifrost.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM Mali Bifrost GPU + +maintainers: + - Rob Herring <robh@kernel.org> + +properties: + $nodename: + pattern: '^gpu@[a-f0-9]+$' + + compatible: + items: + - enum: + - amlogic,meson-g12a-mali + - realtek,rtd1619-mali + - rockchip,px30-mali + - const: arm,mali-bifrost # Mali Bifrost GPU model/revision is fully discoverable + + reg: + maxItems: 1 + + interrupts: + items: + - description: Job interrupt + - description: MMU interrupt + - description: GPU interrupt + + interrupt-names: + items: + - const: job + - const: mmu + - const: gpu + + clocks: + maxItems: 1 + + mali-supply: true + + operating-points-v2: true + +required: + - compatible + - reg + - interrupts + - interrupt-names + - clocks + +allOf: + - if: + properties: + compatible: + contains: + const: amlogic,meson-g12a-mali + then: + properties: + resets: + minItems: 2 + required: + - resets + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + gpu@ffe40000 { + compatible = "amlogic,meson-g12a-mali", "arm,mali-bifrost"; + reg = <0xffe40000 0x10000>; + interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "job", "mmu", "gpu"; + clocks = <&clk 1>; + mali-supply = <&vdd_gpu>; + operating-points-v2 = <&gpu_opp_table>; + resets = <&reset 0>, <&reset 1>; + }; + + gpu_opp_table: opp_table0 { + compatible = "operating-points-v2"; + + opp@533000000 { + opp-hz = /bits/ 64 <533000000>; + opp-microvolt = <1250000>; + }; + opp@450000000 { + opp-hz = /bits/ 64 <450000000>; + opp-microvolt = <1150000>; + }; + opp@400000000 { + opp-hz = /bits/ 64 <400000000>; + opp-microvolt = <1125000>; + }; + opp@350000000 { + opp-hz = /bits/ 64 <350000000>; + opp-microvolt = <1075000>; + }; + opp@266000000 { + opp-hz = /bits/ 64 <266000000>; + opp-microvolt = <1025000>; + }; + opp@160000000 { + opp-hz = /bits/ 64 <160000000>; + opp-microvolt = <925000>; + }; + opp@100000000 { + opp-hz = /bits/ 64 <100000000>; + opp-microvolt = <912500>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt deleted file mode 100644 index 9b298edec5b2..000000000000 --- a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt +++ /dev/null @@ -1,119 +0,0 @@ -ARM Mali Midgard GPU -==================== - -Required properties: - -- compatible : - * Must contain one of the following: - + "arm,mali-t604" - + "arm,mali-t624" - + "arm,mali-t628" - + "arm,mali-t720" - + "arm,mali-t760" - + "arm,mali-t820" - + "arm,mali-t830" - + "arm,mali-t860" - + "arm,mali-t880" - * which must be preceded by one of the following vendor specifics: - + "allwinner,sun50i-h6-mali" - + "amlogic,meson-gxm-mali" - + "samsung,exynos5433-mali" - + "rockchip,rk3288-mali" - + "rockchip,rk3399-mali" - -- reg : Physical base address of the device and length of the register area. - -- interrupts : Contains the three IRQ lines required by Mali Midgard devices. - -- interrupt-names : Contains the names of IRQ resources in the order they were - provided in the interrupts property. Must contain: "job", "mmu", "gpu". - - -Optional properties: - -- clocks : Phandle to clock for the Mali Midgard device. - -- clock-names : Specify the names of the clocks specified in clocks - when multiple clocks are present. - * core: clock driving the GPU itself (When only one clock is present, - assume it's this clock.) - * bus: bus clock for the GPU - -- mali-supply : Phandle to regulator for the Mali device. Refer to - Documentation/devicetree/bindings/regulator/regulator.txt for details. - -- operating-points-v2 : Refer to Documentation/devicetree/bindings/opp/opp.txt - for details. - -- #cooling-cells: Refer to Documentation/devicetree/bindings/thermal/thermal.txt - for details. - -- resets : Phandle of the GPU reset line. - -Vendor-specific bindings ------------------------- - -The Mali GPU is integrated very differently from one SoC to -another. In order to accommodate those differences, you have the option -to specify one more vendor-specific compatible, among: - -- "allwinner,sun50i-h6-mali" - Required properties: - - clocks : phandles to core and bus clocks - - clock-names : must contain "core" and "bus" - - resets: phandle to GPU reset line - -- "amlogic,meson-gxm-mali" - Required properties: - - resets : Should contain phandles of : - + GPU reset line - + GPU APB glue reset line - -Example for a Mali-T760: - -gpu@ffa30000 { - compatible = "rockchip,rk3288-mali", "arm,mali-t760"; - reg = <0xffa30000 0x10000>; - interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "job", "mmu", "gpu"; - clocks = <&cru ACLK_GPU>; - mali-supply = <&vdd_gpu>; - operating-points-v2 = <&gpu_opp_table>; - power-domains = <&power RK3288_PD_GPU>; - #cooling-cells = <2>; -}; - -gpu_opp_table: opp_table0 { - compatible = "operating-points-v2"; - - opp@533000000 { - opp-hz = /bits/ 64 <533000000>; - opp-microvolt = <1250000>; - }; - opp@450000000 { - opp-hz = /bits/ 64 <450000000>; - opp-microvolt = <1150000>; - }; - opp@400000000 { - opp-hz = /bits/ 64 <400000000>; - opp-microvolt = <1125000>; - }; - opp@350000000 { - opp-hz = /bits/ 64 <350000000>; - opp-microvolt = <1075000>; - }; - opp@266000000 { - opp-hz = /bits/ 64 <266000000>; - opp-microvolt = <1025000>; - }; - opp@160000000 { - opp-hz = /bits/ 64 <160000000>; - opp-microvolt = <925000>; - }; - opp@100000000 { - opp-hz = /bits/ 64 <100000000>; - opp-microvolt = <912500>; - }; -}; diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml new file mode 100644 index 000000000000..36f59b3ade71 --- /dev/null +++ b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml @@ -0,0 +1,171 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpu/arm,mali-midgard.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM Mali Midgard GPU + +maintainers: + - Rob Herring <robh@kernel.org> + +properties: + $nodename: + pattern: '^gpu@[a-f0-9]+$' + compatible: + oneOf: + - items: + - enum: + - samsung,exynos5250-mali + - const: arm,mali-t604 + - items: + - enum: + - samsung,exynos5420-mali + - const: arm,mali-t628 + - items: + - enum: + - allwinner,sun50i-h6-mali + - const: arm,mali-t720 + - items: + - enum: + - amlogic,meson-gxm-mali + - realtek,rtd1295-mali + - const: arm,mali-t820 + - items: + - enum: + - arm,juno-mali + - const: arm,mali-t624 + - items: + - enum: + - rockchip,rk3288-mali + - samsung,exynos5433-mali + - const: arm,mali-t760 + - items: + - enum: + - rockchip,rk3399-mali + - const: arm,mali-t860 + + # "arm,mali-t830" + # "arm,mali-t880" + + reg: + maxItems: 1 + + interrupts: + items: + - description: Job interrupt + - description: MMU interrupt + - description: GPU interrupt + + interrupt-names: + items: + - const: job + - const: mmu + - const: gpu + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + minItems: 1 + items: + - const: core + - const: bus + + mali-supply: true + + resets: + minItems: 1 + maxItems: 2 + + operating-points-v2: true + + "#cooling-cells": + const: 2 + +required: + - compatible + - reg + - interrupts + - interrupt-names + - clocks + +allOf: + - if: + properties: + compatible: + contains: + const: allwinner,sun50i-h6-mali + then: + properties: + clocks: + minItems: 2 + required: + - clock-names + - resets + - if: + properties: + compatible: + contains: + const: amlogic,meson-gxm-mali + then: + properties: + resets: + minItems: 2 + required: + - resets + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + gpu@ffa30000 { + compatible = "rockchip,rk3288-mali", "arm,mali-t760"; + reg = <0xffa30000 0x10000>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "job", "mmu", "gpu"; + clocks = <&cru 0>; + mali-supply = <&vdd_gpu>; + operating-points-v2 = <&gpu_opp_table>; + power-domains = <&power 0>; + #cooling-cells = <2>; + }; + + gpu_opp_table: opp_table0 { + compatible = "operating-points-v2"; + + opp@533000000 { + opp-hz = /bits/ 64 <533000000>; + opp-microvolt = <1250000>; + }; + opp@450000000 { + opp-hz = /bits/ 64 <450000000>; + opp-microvolt = <1150000>; + }; + opp@400000000 { + opp-hz = /bits/ 64 <400000000>; + opp-microvolt = <1125000>; + }; + opp@350000000 { + opp-hz = /bits/ 64 <350000000>; + opp-microvolt = <1075000>; + }; + opp@266000000 { + opp-hz = /bits/ 64 <266000000>; + opp-microvolt = <1025000>; + }; + opp@160000000 { + opp-hz = /bits/ 64 <160000000>; + opp-microvolt = <925000>; + }; + opp@100000000 { + opp-hz = /bits/ 64 <100000000>; + opp-microvolt = <912500>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt deleted file mode 100644 index b352a6851a06..000000000000 --- a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt +++ /dev/null @@ -1,124 +0,0 @@ -ARM Mali Utgard GPU -=================== - -Required properties: - - compatible - * Must be one of the following: - + "arm,mali-300" - + "arm,mali-400" - + "arm,mali-450" - * And, optionally, one of the vendor specific compatible: - + allwinner,sun4i-a10-mali - + allwinner,sun7i-a20-mali - + allwinner,sun8i-h3-mali - + allwinner,sun50i-a64-mali - + allwinner,sun50i-h5-mali - + amlogic,meson8-mali - + amlogic,meson8b-mali - + amlogic,meson-gxbb-mali - + amlogic,meson-gxl-mali - + samsung,exynos4210-mali - + rockchip,rk3036-mali - + rockchip,rk3066-mali - + rockchip,rk3188-mali - + rockchip,rk3228-mali - + rockchip,rk3328-mali - + stericsson,db8500-mali - - - reg: Physical base address and length of the GPU registers - - - interrupts: an entry for each entry in interrupt-names. - See ../interrupt-controller/interrupts.txt for details. - - - interrupt-names: - * ppX: Pixel Processor X interrupt (X from 0 to 7) - * ppmmuX: Pixel Processor X MMU interrupt (X from 0 to 7) - * pp: Pixel Processor broadcast interrupt (mali-450 only) - * gp: Geometry Processor interrupt - * gpmmu: Geometry Processor MMU interrupt - - - clocks: an entry for each entry in clock-names - - clock-names: - * bus: bus clock for the GPU - * core: clock driving the GPU itself - -Optional properties: - - interrupt-names and interrupts: - * pmu: Power Management Unit interrupt, if implemented in hardware - - - memory-region: - Memory region to allocate from, as defined in - Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt - - - mali-supply: - Phandle to regulator for the Mali device, as defined in - Documentation/devicetree/bindings/regulator/regulator.txt for details. - - - operating-points-v2: - Operating Points for the GPU, as defined in - Documentation/devicetree/bindings/opp/opp.txt - - - power-domains: - A power domain consumer specifier as defined in - Documentation/devicetree/bindings/power/power_domain.txt - -Vendor-specific bindings ------------------------- - -The Mali GPU is integrated very differently from one SoC to -another. In order to accomodate those differences, you have the option -to specify one more vendor-specific compatible, among: - - - allwinner,sun4i-a10-mali - Required properties: - * resets: phandle to the reset line for the GPU - - - allwinner,sun7i-a20-mali - Required properties: - * resets: phandle to the reset line for the GPU - - - allwinner,sun50i-a64-mali - Required properties: - * resets: phandle to the reset line for the GPU - - - allwinner,sun50i-h5-mali - Required properties: - * resets: phandle to the reset line for the GPU - - - amlogic,meson8-mali and amlogic,meson8b-mali - Required properties: - * resets: phandle to the reset line for the GPU - - - Rockchip variants: - Required properties: - * resets: phandle to the reset line for the GPU - - - stericsson,db8500-mali - Required properties: - * interrupt-names and interrupts: - + combined: combined interrupt of all of the above lines - -Example: - -mali: gpu@1c40000 { - compatible = "allwinner,sun7i-a20-mali", "arm,mali-400"; - reg = <0x01c40000 0x10000>; - interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "gp", - "gpmmu", - "pp0", - "ppmmu0", - "pp1", - "ppmmu1", - "pmu"; - clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>; - clock-names = "bus", "core"; - resets = <&ccu RST_BUS_GPU>; -}; - diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml new file mode 100644 index 000000000000..afde81be3c29 --- /dev/null +++ b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml @@ -0,0 +1,167 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpu/arm,mali-utgard.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM Mali Utgard GPU + +maintainers: + - Rob Herring <robh@kernel.org> + - Maxime Ripard <maxime.ripard@free-electrons.com> + - Heiko Stuebner <heiko@sntech.de> + +properties: + $nodename: + pattern: '^gpu@[a-f0-9]+$' + compatible: + oneOf: + - items: + - const: allwinner,sun8i-a23-mali + - const: allwinner,sun7i-a20-mali + - const: arm,mali-400 + - items: + - enum: + - allwinner,sun4i-a10-mali + - allwinner,sun7i-a20-mali + - allwinner,sun8i-h3-mali + - allwinner,sun50i-a64-mali + - rockchip,rk3036-mali + - rockchip,rk3066-mali + - rockchip,rk3188-mali + - rockchip,rk3228-mali + - samsung,exynos4210-mali + - stericsson,db8500-mali + - const: arm,mali-400 + - items: + - enum: + - allwinner,sun50i-h5-mali + - amlogic,meson8-mali + - amlogic,meson8b-mali + - amlogic,meson-gxbb-mali + - amlogic,meson-gxl-mali + - hisilicon,hi6220-mali + - rockchip,rk3328-mali + - const: arm,mali-450 + + # "arm,mali-300" + + reg: + maxItems: 1 + + interrupts: + minItems: 4 + maxItems: 20 + + interrupt-names: + allOf: + - additionalItems: true + minItems: 4 + maxItems: 20 + items: + # At least enforce the first 2 interrupts + - const: gp + - const: gpmmu + - items: + # Not ideal as any order and combination are allowed + enum: + - gp # Geometry Processor interrupt + - gpmmu # Geometry Processor MMU interrupt + - pp # Pixel Processor broadcast interrupt (mali-450 only) + - pp0 # Pixel Processor X interrupt (X from 0 to 7) + - ppmmu0 # Pixel Processor X MMU interrupt (X from 0 to 7) + - pp1 + - ppmmu1 + - pp2 + - ppmmu2 + - pp3 + - ppmmu3 + - pp4 + - ppmmu4 + - pp5 + - ppmmu5 + - pp6 + - ppmmu6 + - pp7 + - ppmmu7 + - pmu # Power Management Unit interrupt (optional) + - combined # stericsson,db8500-mali only + + clocks: + maxItems: 2 + + clock-names: + items: + - const: bus + - const: core + + memory-region: true + + mali-supply: true + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + operating-points-v2: true + +required: + - compatible + - reg + - interrupts + - interrupt-names + - clocks + - clock-names + +allOf: + - if: + properties: + compatible: + contains: + enum: + - allwinner,sun4i-a10-mali + - allwinner,sun7i-a20-mali + - allwinner,sun50i-a64-mali + - allwinner,sun50i-h5-mali + - amlogic,meson8-mali + - amlogic,meson8b-mali + - hisilicon,hi6220-mali + - rockchip,rk3036-mali + - rockchip,rk3066-mali + - rockchip,rk3188-mali + - rockchip,rk3228-mali + - rockchip,rk3328-mali + then: + required: + - resets + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + mali: gpu@1c40000 { + compatible = "allwinner,sun7i-a20-mali", "arm,mali-400"; + reg = <0x01c40000 0x10000>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gp", + "gpmmu", + "pp0", + "ppmmu0", + "pp1", + "ppmmu1", + "pmu"; + clocks = <&ccu 1>, <&ccu 2>; + clock-names = "bus", "core"; + resets = <&ccu 1>; + }; + +... diff --git a/Documentation/devicetree/bindings/gpu/samsung-g2d.txt b/Documentation/devicetree/bindings/gpu/samsung-g2d.txt deleted file mode 100644 index 1e7959332dbc..000000000000 --- a/Documentation/devicetree/bindings/gpu/samsung-g2d.txt +++ /dev/null @@ -1,27 +0,0 @@ -* Samsung 2D Graphics Accelerator - -Required properties: - - compatible : value should be one among the following: - (a) "samsung,s5pv210-g2d" for G2D IP present in S5PV210 & Exynos4210 SoC - (b) "samsung,exynos4212-g2d" for G2D IP present in Exynos4x12 SoCs - (c) "samsung,exynos5250-g2d" for G2D IP present in Exynos5250 SoC - - - reg : Physical base address of the IP registers and length of memory - mapped region. - - - interrupts : G2D interrupt number to the CPU. - - clocks : from common clock binding: handle to G2D clocks. - - clock-names : names of clocks listed in clocks property, in the same - order, depending on SoC type: - - for S5PV210 and Exynos4 based SoCs: "fimg2d" and - "sclk_fimg2d" - - for Exynos5250 SoC: "fimg2d". - -Example: - g2d@12800000 { - compatible = "samsung,s5pv210-g2d"; - reg = <0x12800000 0x1000>; - interrupts = <0 89 0>; - clocks = <&clock 177>, <&clock 277>; - clock-names = "sclk_fimg2d", "fimg2d"; - }; diff --git a/Documentation/devicetree/bindings/gpu/samsung-g2d.yaml b/Documentation/devicetree/bindings/gpu/samsung-g2d.yaml new file mode 100644 index 000000000000..e7daae862578 --- /dev/null +++ b/Documentation/devicetree/bindings/gpu/samsung-g2d.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpu/samsung-g2d.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung SoC 2D Graphics Accelerator + +maintainers: + - Inki Dae <inki.dae@samsung.com> + +properties: + compatible: + enum: + - samsung,s5pv210-g2d # in S5PV210 & Exynos4210 SoC + - samsung,exynos4212-g2d # in Exynos4x12 SoCs + - samsung,exynos5250-g2d + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: {} + clock-names: {} + iommus: {} + power-domains: {} + +if: + properties: + compatible: + contains: + const: samsung,exynos5250-g2d + +then: + properties: + clocks: + items: + - description: fimg2d clock + clock-names: + items: + - const: fimg2d + +else: + properties: + clocks: + items: + - description: sclk_fimg2d clock + - description: fimg2d clock + clock-names: + items: + - const: sclk_fimg2d + - const: fimg2d + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + g2d@12800000 { + compatible = "samsung,s5pv210-g2d"; + reg = <0x12800000 0x1000>; + interrupts = <0 89 0>; + clocks = <&clock 177>, <&clock 277>; + clock-names = "sclk_fimg2d", "fimg2d"; + }; + +... diff --git a/Documentation/devicetree/bindings/gpu/samsung-rotator.txt b/Documentation/devicetree/bindings/gpu/samsung-rotator.txt deleted file mode 100644 index 3aca2578da0b..000000000000 --- a/Documentation/devicetree/bindings/gpu/samsung-rotator.txt +++ /dev/null @@ -1,28 +0,0 @@ -* Samsung Image Rotator - -Required properties: - - compatible : value should be one of the following: - * "samsung,s5pv210-rotator" for Rotator IP in S5PV210 - * "samsung,exynos4210-rotator" for Rotator IP in Exynos4210 - * "samsung,exynos4212-rotator" for Rotator IP in Exynos4212/4412 - * "samsung,exynos5250-rotator" for Rotator IP in Exynos5250 - - - reg : Physical base address of the IP registers and length of memory - mapped region. - - - interrupts : Interrupt specifier for rotator interrupt, according to format - specific to interrupt parent. - - - clocks : Clock specifier for rotator clock, according to generic clock - bindings. (See Documentation/devicetree/bindings/clock/exynos*.txt) - - - clock-names : Names of clocks. For exynos rotator, it should be "rotator". - -Example: - rotator@12810000 { - compatible = "samsung,exynos4210-rotator"; - reg = <0x12810000 0x1000>; - interrupts = <0 83 0>; - clocks = <&clock 278>; - clock-names = "rotator"; - }; diff --git a/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml b/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml new file mode 100644 index 000000000000..f4dfa6fc724c --- /dev/null +++ b/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml @@ -0,0 +1,48 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpu/samsung-rotator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung SoC Image Rotator + +maintainers: + - Inki Dae <inki.dae@samsung.com> + +properties: + compatible: + enum: + - "samsung,s5pv210-rotator" + - "samsung,exynos4210-rotator" + - "samsung,exynos4212-rotator" + - "samsung,exynos5250-rotator" + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: rotator + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +examples: + - | + rotator@12810000 { + compatible = "samsung,exynos4210-rotator"; + reg = <0x12810000 0x1000>; + interrupts = <0 83 0>; + clocks = <&clock 278>; + clock-names = "rotator"; + }; + diff --git a/Documentation/devicetree/bindings/gpu/samsung-scaler.txt b/Documentation/devicetree/bindings/gpu/samsung-scaler.txt deleted file mode 100644 index 9c3d98105dfd..000000000000 --- a/Documentation/devicetree/bindings/gpu/samsung-scaler.txt +++ /dev/null @@ -1,27 +0,0 @@ -* Samsung Exynos Image Scaler - -Required properties: - - compatible : value should be one of the following: - (a) "samsung,exynos5420-scaler" for Scaler IP in Exynos5420 - (b) "samsung,exynos5433-scaler" for Scaler IP in Exynos5433 - - - reg : Physical base address of the IP registers and length of memory - mapped region. - - - interrupts : Interrupt specifier for scaler interrupt, according to format - specific to interrupt parent. - - - clocks : Clock specifier for scaler clock, according to generic clock - bindings. (See Documentation/devicetree/bindings/clock/exynos*.txt) - - - clock-names : Names of clocks. For exynos scaler, it should be "mscl" - on 5420 and "pclk", "aclk" and "aclk_xiu" on 5433. - -Example: - scaler@12800000 { - compatible = "samsung,exynos5420-scaler"; - reg = <0x12800000 0x1294>; - interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_MSCL0>; - clock-names = "mscl"; - }; diff --git a/Documentation/devicetree/bindings/gpu/samsung-scaler.yaml b/Documentation/devicetree/bindings/gpu/samsung-scaler.yaml new file mode 100644 index 000000000000..5317ac64426a --- /dev/null +++ b/Documentation/devicetree/bindings/gpu/samsung-scaler.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpu/samsung-scaler.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos SoC Image Scaler + +maintainers: + - Inki Dae <inki.dae@samsung.com> + +properties: + compatible: + enum: + - samsung,exynos5420-scaler + - samsung,exynos5433-scaler + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: {} + clock-names: {} + iommus: {} + power-domains: {} + +if: + properties: + compatible: + contains: + const: samsung,exynos5420-scaler + +then: + properties: + clocks: + items: + - description: mscl clock + + clock-names: + items: + - const: mscl + +else: + properties: + clocks: + items: + - description: pclk clock + - description: aclk clock + - description: aclk_xiu clock + + clock-names: + items: + - const: pclk + - const: aclk + - const: aclk_xiu + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/exynos5420.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + scaler@12800000 { + compatible = "samsung,exynos5420-scaler"; + reg = <0x12800000 0x1294>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_MSCL0>; + clock-names = "mscl"; + }; + +... |
