summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--arch/powerpc/include/asm/cpm.h24
-rw-r--r--arch/powerpc/include/asm/cpm1.h3
-rw-r--r--arch/powerpc/kernel/fsl_booke_entry_mapping.S4
-rw-r--r--arch/powerpc/sysdev/micropatch.c30
-rw-r--r--drivers/spi/spi_mpc8xxx.c22
5 files changed, 45 insertions, 38 deletions
diff --git a/arch/powerpc/include/asm/cpm.h b/arch/powerpc/include/asm/cpm.h
index 0835eb977ba9..e50323fe941f 100644
--- a/arch/powerpc/include/asm/cpm.h
+++ b/arch/powerpc/include/asm/cpm.h
@@ -7,6 +7,30 @@
#include <linux/of.h>
/*
+ * SPI Parameter RAM common to QE and CPM.
+ */
+struct spi_pram {
+ __be16 rbase; /* Rx Buffer descriptor base address */
+ __be16 tbase; /* Tx Buffer descriptor base address */
+ u8 rfcr; /* Rx function code */
+ u8 tfcr; /* Tx function code */
+ __be16 mrblr; /* Max receive buffer length */
+ __be32 rstate; /* Internal */
+ __be32 rdp; /* Internal */
+ __be16 rbptr; /* Internal */
+ __be16 rbc; /* Internal */
+ __be32 rxtmp; /* Internal */
+ __be32 tstate; /* Internal */
+ __be32 tdp; /* Internal */
+ __be16 tbptr; /* Internal */
+ __be16 tbc; /* Internal */
+ __be32 txtmp; /* Internal */
+ __be32 res; /* Tx temp. */
+ __be16 rpbase; /* Relocation pointer (CPM1 only) */
+ __be16 res1; /* Reserved */
+};
+
+/*
* USB Controller pram common to QE and CPM.
*/
struct usb_ctlr {
diff --git a/arch/powerpc/include/asm/cpm1.h b/arch/powerpc/include/asm/cpm1.h
index 81b01192f440..bd07650dca56 100644
--- a/arch/powerpc/include/asm/cpm1.h
+++ b/arch/powerpc/include/asm/cpm1.h
@@ -17,6 +17,7 @@
#ifndef __CPM1__
#define __CPM1__
+#include <linux/init.h>
#include <asm/8xx_immap.h>
#include <asm/ptrace.h>
#include <asm/cpm.h>
@@ -54,7 +55,7 @@ extern cpm8xx_t __iomem *cpmp; /* Pointer to comm processor */
extern void cpm_setbrg(uint brg, uint rate);
-extern void cpm_load_patch(cpm8xx_t *cp);
+extern void __init cpm_load_patch(cpm8xx_t *cp);
extern void cpm_reset(void);
diff --git a/arch/powerpc/kernel/fsl_booke_entry_mapping.S b/arch/powerpc/kernel/fsl_booke_entry_mapping.S
index beb4d78a2304..a92c79be2728 100644
--- a/arch/powerpc/kernel/fsl_booke_entry_mapping.S
+++ b/arch/powerpc/kernel/fsl_booke_entry_mapping.S
@@ -205,8 +205,7 @@ next_tlb_setup:
bdnz+ next_tlb_setup
/* 7. Jump to our 1:1 mapping */
- li r6, 0
-
+ mr r6, r25
#else
#error You need to specify the mapping or not use this at all.
#endif
@@ -217,7 +216,6 @@ next_tlb_setup:
1: mflr r9
rlwimi r6,r9,0,20,31
addi r6,r6,(2f - 1b)
- add r6, r6, r25
mtspr SPRN_SRR0,r6
mtspr SPRN_SRR1,r7
rfi /* start execution out of TLB1[0] entry */
diff --git a/arch/powerpc/sysdev/micropatch.c b/arch/powerpc/sysdev/micropatch.c
index d8d602840757..c0bb76ef7242 100644
--- a/arch/powerpc/sysdev/micropatch.c
+++ b/arch/powerpc/sysdev/micropatch.c
@@ -4,6 +4,7 @@
* also relocates SMC2, but this would require additional changes
* to uart.c, so I am holding off on that for a moment.
*/
+#include <linux/init.h>
#include <linux/errno.h>
#include <linux/sched.h>
#include <linux/kernel.h>
@@ -16,6 +17,7 @@
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/8xx_immap.h>
+#include <asm/cpm.h>
#include <asm/cpm1.h>
/*
@@ -24,7 +26,7 @@
#ifdef CONFIG_I2C_SPI_UCODE_PATCH
-uint patch_2000[] = {
+static uint patch_2000[] __initdata = {
0x7FFFEFD9,
0x3FFD0000,
0x7FFB49F7,
@@ -143,7 +145,7 @@ uint patch_2000[] = {
0x5F8247F8
};
-uint patch_2f00[] = {
+static uint patch_2f00[] __initdata = {
0x3E303430,
0x34343737,
0xABF7BF9B,
@@ -182,7 +184,7 @@ uint patch_2f00[] = {
#ifdef CONFIG_I2C_SPI_SMC1_UCODE_PATCH
-uint patch_2000[] = {
+static uint patch_2000[] __initdata = {
0x3fff0000,
0x3ffd0000,
0x3ffb0000,
@@ -505,7 +507,7 @@ uint patch_2000[] = {
0x6079e2bb
};
-uint patch_2f00[] = {
+static uint patch_2f00[] __initdata = {
0x30303030,
0x3e3e3434,
0xabbf9b99,
@@ -572,7 +574,7 @@ uint patch_2f00[] = {
0xf22f3f23
};
-uint patch_2e00[] = {
+static uint patch_2e00[] __initdata = {
0x27eeeeee,
0xeeeeeeee,
0xeeeeeeee,
@@ -598,7 +600,7 @@ uint patch_2e00[] = {
#ifdef CONFIG_USB_SOF_UCODE_PATCH
-uint patch_2000[] = {
+static uint patch_2000[] __initdata = {
0x7fff0000,
0x7ffd0000,
0x7ffb0000,
@@ -613,21 +615,25 @@ uint patch_2000[] = {
0x60750000
};
-uint patch_2f00[] = {
+static uint patch_2f00[] __initdata = {
0x3030304c,
0xcab9e441,
0xa1aaf220
};
#endif
-void
-cpm_load_patch(cpm8xx_t *cp)
+void __init cpm_load_patch(cpm8xx_t *cp)
{
volatile uint *dp; /* Dual-ported RAM. */
volatile cpm8xx_t *commproc;
+#if defined(CONFIG_I2C_SPI_UCODE_PATCH) || \
+ defined(CONFIG_I2C_SPI_SMC1_UCODE_PATCH)
volatile iic_t *iip;
- volatile spi_t *spp;
+ volatile struct spi_pram *spp;
+#ifdef CONFIG_I2C_SPI_SMC1_UCODE_PATCH
volatile smc_uart_t *smp;
+#endif
+#endif
int i;
commproc = cp;
@@ -668,8 +674,8 @@ cpm_load_patch(cpm8xx_t *cp)
/* Put SPI above the IIC, also 32-byte aligned.
*/
i = (RPBASE + sizeof(iic_t) + 31) & ~31;
- spp = (spi_t *)&commproc->cp_dparam[PROFF_SPI];
- spp->spi_rpbase = i;
+ spp = (struct spi_pram *)&commproc->cp_dparam[PROFF_SPI];
+ spp->rpbase = i;
# if defined(CONFIG_I2C_SPI_UCODE_PATCH)
commproc->cp_cpmcr1 = 0x802a;
diff --git a/drivers/spi/spi_mpc8xxx.c b/drivers/spi/spi_mpc8xxx.c
index ffa111a7e9d4..97ab0a81338a 100644
--- a/drivers/spi/spi_mpc8xxx.c
+++ b/drivers/spi/spi_mpc8xxx.c
@@ -66,28 +66,6 @@ struct mpc8xxx_spi_reg {
__be32 receive;
};
-/* SPI Parameter RAM */
-struct spi_pram {
- __be16 rbase; /* Rx Buffer descriptor base address */
- __be16 tbase; /* Tx Buffer descriptor base address */
- u8 rfcr; /* Rx function code */
- u8 tfcr; /* Tx function code */
- __be16 mrblr; /* Max receive buffer length */
- __be32 rstate; /* Internal */
- __be32 rdp; /* Internal */
- __be16 rbptr; /* Internal */
- __be16 rbc; /* Internal */
- __be32 rxtmp; /* Internal */
- __be32 tstate; /* Internal */
- __be32 tdp; /* Internal */
- __be16 tbptr; /* Internal */
- __be16 tbc; /* Internal */
- __be32 txtmp; /* Internal */
- __be32 res; /* Tx temp. */
- __be16 rpbase; /* Relocation pointer (CPM1 only) */
- __be16 res1; /* Reserved */
-};
-
/* SPI Controller mode register definitions */
#define SPMODE_LOOP (1 << 30)
#define SPMODE_CI_INACTIVEHIGH (1 << 29)
OpenPOWER on IntegriCloud