diff options
29 files changed, 428 insertions, 130 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 032138d9c60b..a5d8dcc4b2b6 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -688,6 +688,7 @@ dtb-$(CONFIG_SOC_DRA7XX) += \ am57xx-sbc-am57x.dtb \ am572x-idk.dtb \ am571x-idk.dtb \ + am574x-idk.dtb \ dra7-evm.dtb \ dra72-evm.dtb \ dra72-evm-revc.dtb \ diff --git a/arch/arm/boot/dts/am335x-boneblue.dts b/arch/arm/boot/dts/am335x-boneblue.dts index d5be9fc4f416..3f2480d05a3b 100644 --- a/arch/arm/boot/dts/am335x-boneblue.dts +++ b/arch/arm/boot/dts/am335x-boneblue.dts @@ -159,6 +159,7 @@ >; }; + /* UT0 */ uart0_pins: pinmux_uart0_pins { pinctrl-single,pins = < AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* (E15) uart0_rxd.uart0_rxd */ @@ -166,6 +167,37 @@ >; }; + /* UT1 */ + uart1_pins: pinmux_uart1_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0) /* (D16) uart1_rxd.uart1_rxd */ + AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* (D15) uart1_txd.uart1_txd */ + >; + }; + + /* GPS */ + uart2_pins: pinmux_uart2_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE1) /* (A17) spi0_sclk.uart2_rxd */ + AM33XX_IOPAD(0x954, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* (B17) spi0_d0.uart2_txd */ + >; + }; + + /* DSM2 */ + uart4_pins: pinmux_uart4_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE6) /* (T17) gpmc_wait0.uart4_rxd */ + >; + }; + + /* UT5 */ + uart5_pins: pinmux_uart5_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x8C4, PIN_INPUT_PULLUP | MUX_MODE4) /* (U2) lcd_data9.uart5_rxd */ + AM33XX_IOPAD(0x8C0, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* (U1) lcd_data8.uart5_txd */ + >; + }; + mmc1_pins: pinmux_mmc1_pins { pinctrl-single,pins = < AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* (C15) spi0_cs1.gpio0[6] */ @@ -216,10 +248,19 @@ wl18xx_pins: pinmux_wl18xx_pins { pinctrl-single,pins = < AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* (K18) gmii1_txclk.gpio3[9] - WL_EN */ - AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (H18) rmii1_refclk.gpio0[29] - WL_IRQ */ + AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (K16) gmii1_txd1.gpio0[21] - WL_IRQ */ AM33XX_IOPAD(0x930, PIN_OUTPUT_PULLUP | MUX_MODE7) /* (L18) gmii1_rxclk.gpio3[10] - LS_BUF_EN */ >; }; + + /* DCAN */ + dcan1_pins: pinmux_dcan1_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x96c, PIN_INPUT | MUX_MODE2) /* (E17) uart0_rtsn.dcan1_rx */ + AM33XX_IOPAD(0x968, PIN_OUTPUT | MUX_MODE2) /* (E18) uart0_ctsn.dcan1_tx */ + AM33XX_IOPAD(0x940, PIN_OUTPUT | MUX_MODE7) /* (M16) gmii1_rxd0.gpio2[21] */ + >; + }; }; &uart0 { @@ -229,6 +270,34 @@ status = "okay"; }; +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins>; + + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&uart5_pins>; + + status = "okay"; +}; + &usb { status = "okay"; }; @@ -414,7 +483,7 @@ compatible = "ti,wl1835"; reg = <2>; interrupt-parent = <&gpio0>; - interrupts = <29 IRQ_TYPE_EDGE_RISING>; + interrupts = <21 IRQ_TYPE_EDGE_RISING>; }; }; @@ -450,6 +519,12 @@ clock-names = "ext-clk", "int-clk"; }; +&dcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&dcan1_pins>; + status = "okay"; +}; + &gpio3 { ls_buf_en { gpio-hog; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index ca7400c20ed4..628c77b0b386 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -500,7 +500,7 @@ status = "disabled"; }; - mailbox: mailbox@480C8000 { + mailbox: mailbox@480c8000 { compatible = "ti,omap4-mailbox"; reg = <0x480C8000 0x200>; interrupts = <77>; @@ -999,7 +999,7 @@ dma-names = "tx", "rx"; }; - mcasp1: mcasp@4803C000 { + mcasp1: mcasp@4803c000 { compatible = "ti,am33xx-mcasp-audio"; ti,hwmods = "mcasp1"; reg = <0x4803C000 0x2000>, diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi index 00da3f2c4072..76994165fb3a 100644 --- a/arch/arm/boot/dts/am3517.dtsi +++ b/arch/arm/boot/dts/am3517.dtsi @@ -26,7 +26,7 @@ interrupt-names = "mc"; }; - davinci_emac: ethernet@0x5c000000 { + davinci_emac: ethernet@5c000000 { compatible = "ti,am3517-emac"; ti,hwmods = "davinci_emac"; status = "disabled"; @@ -41,7 +41,7 @@ local-mac-address = [ 00 00 00 00 00 00 ]; }; - davinci_mdio: ethernet@0x5c030000 { + davinci_mdio: ethernet@5c030000 { compatible = "ti,davinci_mdio"; ti,hwmods = "davinci_mdio"; status = "disabled"; diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index 2f2984db1c26..964f3ef79728 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -329,7 +329,7 @@ status = "disabled"; }; - mailbox: mailbox@480C8000 { + mailbox: mailbox@480c8000 { compatible = "ti,omap4-mailbox"; reg = <0x480C8000 0x200>; interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; @@ -944,7 +944,7 @@ dma-names = "tx", "rx"; }; - mcasp1: mcasp@4803C000 { + mcasp1: mcasp@4803c000 { compatible = "ti,am33xx-mcasp-audio"; ti,hwmods = "mcasp1"; reg = <0x4803C000 0x2000>, diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index afb8eb0a0a16..c3b1a3fb5a2e 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -55,7 +55,7 @@ enable-active-high; }; - backlight { + lcd_bl: backlight { compatible = "pwm-backlight"; pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>; brightness-levels = <0 51 53 56 62 75 101 152 255>; @@ -86,6 +86,8 @@ compatible = "osddisplays,osd057T0559-34ts", "panel-dpi"; label = "lcd"; + backlight = <&lcd_bl>; + panel-timing { clock-frequency = <33000000>; hactive = <800>; diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts index 5e364473067f..20132477a871 100644 --- a/arch/arm/boot/dts/am437x-idk-evm.dts +++ b/arch/arm/boot/dts/am437x-idk-evm.dts @@ -519,3 +519,17 @@ &cpu { cpu0-supply = <&tps>; }; + +&cpu0_opp_table { + /* + * Supply voltage supervisor on board will not allow opp50 so + * disable it and set opp100 as suspend OPP. + */ + opp50@300000000 { + status = "disabled"; + }; + + opp100@600000000 { + opp-suspend; + }; +}; diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts index 2c6bf0684f50..3fa3b226995d 100644 --- a/arch/arm/boot/dts/am437x-sk-evm.dts +++ b/arch/arm/boot/dts/am437x-sk-evm.dts @@ -35,7 +35,7 @@ clock-frequency = <32768>; }; - backlight { + lcd_bl: backlight { compatible = "pwm-backlight"; pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>; brightness-levels = <0 51 53 56 62 75 101 152 255>; @@ -132,6 +132,8 @@ pinctrl-names = "default"; pinctrl-0 = <&lcd_pins>; + backlight = <&lcd_bl>; + enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; panel-timing { diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index d3363fbe4240..00c3d1de384f 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -48,6 +48,8 @@ compatible = "osddisplays,osd057T0559-34ts", "panel-dpi"; label = "lcd"; + backlight = <&lcd_bl>; + panel-timing { clock-frequency = <33000000>; hactive = <800>; @@ -107,7 +109,7 @@ 0x03030069>; /* LEFT */ }; - backlight { + lcd_bl: backlight { compatible = "pwm-backlight"; pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>; brightness-levels = <0 51 53 56 62 75 101 152 255>; @@ -989,3 +991,7 @@ assigned-clocks = <&mux_synctimer32k_ck>; assigned-clock-parents = <&clkdiv32k_ick>; }; + +&cpu { + cpu0-supply = <&dcdc2>; +}; diff --git a/arch/arm/boot/dts/am571x-idk.dts b/arch/arm/boot/dts/am571x-idk.dts index debf9464403e..6d3c83743156 100644 --- a/arch/arm/boot/dts/am571x-idk.dts +++ b/arch/arm/boot/dts/am571x-idk.dts @@ -117,3 +117,7 @@ pinctrl-1 = <&mmc2_pins_hs>; pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>; }; + +&cpu0 { + vdd-supply = <&smps12_reg>; +}; diff --git a/arch/arm/boot/dts/am572x-idk-common.dtsi b/arch/arm/boot/dts/am572x-idk-common.dtsi new file mode 100644 index 000000000000..c6d858b31011 --- /dev/null +++ b/arch/arm/boot/dts/am572x-idk-common.dtsi @@ -0,0 +1,100 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/ + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include "am57xx-idk-common.dtsi" + +/ { + memory@0 { + device_type = "memory"; + reg = <0x0 0x80000000 0x0 0x80000000>; + }; + + status-leds { + compatible = "gpio-leds"; + cpu0-led { + label = "status0:red:cpu0"; + gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + linux,default-trigger = "cpu0"; + }; + + usr0-led { + label = "status0:green:usr"; + gpios = <&gpio3 11 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + heartbeat-led { + label = "status0:blue:heartbeat"; + gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>; + default-state = "off"; + linux,default-trigger = "heartbeat"; + }; + + cpu1-led { + label = "status1:red:cpu1"; + gpios = <&gpio3 10 GPIO_ACTIVE_HIGH>; + default-state = "off"; + linux,default-trigger = "cpu1"; + }; + + usr1-led { + label = "status1:green:usr"; + gpios = <&gpio7 23 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + mmc0-led { + label = "status1:blue:mmc0"; + gpios = <&gpio7 22 GPIO_ACTIVE_HIGH>; + default-state = "off"; + linux,default-trigger = "mmc0"; + }; + }; +}; + +&omap_dwc3_2 { + extcon = <&extcon_usb2>; +}; + +&extcon_usb2 { + id-gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>; + vbus-gpio = <&gpio3 26 GPIO_ACTIVE_HIGH>; +}; + +&sn65hvs882 { + load-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; +}; + +&pcie1_rc { + status = "okay"; + gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; +}; + +&pcie1_ep { + gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; +}; + +&mailbox5 { + status = "okay"; + mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { + status = "okay"; + }; + mbox_dsp1_ipc3x: mbox_dsp1_ipc3x { + status = "okay"; + }; +}; + +&mailbox6 { + status = "okay"; + mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { + status = "okay"; + }; + mbox_dsp2_ipc3x: mbox_dsp2_ipc3x { + status = "okay"; + }; +}; diff --git a/arch/arm/boot/dts/am572x-idk.dts b/arch/arm/boot/dts/am572x-idk.dts index a578fe97ba3b..9ab0af5017df 100644 --- a/arch/arm/boot/dts/am572x-idk.dts +++ b/arch/arm/boot/dts/am572x-idk.dts @@ -9,8 +9,7 @@ /dts-v1/; #include "dra74x.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/interrupt-controller/irq.h> +#include "am572x-idk-common.dtsi" #include "am57xx-idk-common.dtsi" #include "dra74x-mmc-iodelay.dtsi" @@ -18,54 +17,6 @@ model = "TI AM5728 IDK"; compatible = "ti,am5728-idk", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7"; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x80000000 0x0 0x80000000>; - }; - - status-leds { - compatible = "gpio-leds"; - cpu0-led { - label = "status0:red:cpu0"; - gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>; - default-state = "off"; - linux,default-trigger = "cpu0"; - }; - - usr0-led { - label = "status0:green:usr"; - gpios = <&gpio3 11 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; - - heartbeat-led { - label = "status0:blue:heartbeat"; - gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>; - default-state = "off"; - linux,default-trigger = "heartbeat"; - }; - - cpu1-led { - label = "status1:red:cpu1"; - gpios = <&gpio3 10 GPIO_ACTIVE_HIGH>; - default-state = "off"; - linux,default-trigger = "cpu1"; - }; - - usr1-led { - label = "status1:green:usr"; - gpios = <&gpio7 23 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; - - mmc0-led { - label = "status1:blue:mmc0"; - gpios = <&gpio7 22 GPIO_ACTIVE_HIGH>; - default-state = "off"; - linux,default-trigger = "mmc0"; - }; - }; }; &mmc1 { @@ -86,44 +37,6 @@ pinctrl-2 = <&mmc2_pins_ddr_rev20>; }; -&omap_dwc3_2 { - extcon = <&extcon_usb2>; -}; - -&extcon_usb2 { - id-gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>; - vbus-gpio = <&gpio3 26 GPIO_ACTIVE_HIGH>; -}; - -&sn65hvs882 { - load-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; -}; - -&pcie1_rc { - status = "okay"; - gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; -}; - -&pcie1_ep { - gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; -}; - -&mailbox5 { - status = "okay"; - mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { - status = "okay"; - }; - mbox_dsp1_ipc3x: mbox_dsp1_ipc3x { - status = "okay"; - }; -}; - -&mailbox6 { - status = "okay"; - mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { - status = "okay"; - }; - mbox_dsp2_ipc3x: mbox_dsp2_ipc3x { - status = "okay"; - }; +&cpu0 { + vdd-supply = <&smps12_reg>; }; diff --git a/arch/arm/boot/dts/am574x-idk.dts b/arch/arm/boot/dts/am574x-idk.dts new file mode 100644 index 000000000000..41e12a382d2f --- /dev/null +++ b/arch/arm/boot/dts/am574x-idk.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/ + */ + + +/dts-v1/; + +#include "dra76x.dtsi" +#include "am572x-idk-common.dtsi" + +/ { + model = "TI AM5748 IDK"; + compatible = "ti,am5728-idk", "ti,dra762", "ti,dra7"; +}; + +&qspi { + spi-max-frequency = <96000000>; + m25p80@0 { + spi-max-frequency = <96000000>; + }; +}; diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi index 74d1d0dab336..ab60035bc50c 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi +++ b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi @@ -388,7 +388,7 @@ }; &cpu0 { - cpu0-supply = <&smps12_reg>; + vdd-supply = <&smps12_reg>; voltage-tolerance = <1>; }; diff --git a/arch/arm/boot/dts/dra62x-j5eco-evm.dts b/arch/arm/boot/dts/dra62x-j5eco-evm.dts index 155eb32ee213..fee0547f7302 100644 --- a/arch/arm/boot/dts/dra62x-j5eco-evm.dts +++ b/arch/arm/boot/dts/dra62x-j5eco-evm.dts @@ -74,19 +74,19 @@ label = "X-Loader"; reg = <0 0x80000>; }; - partition@0x80000 { + partition@80000 { label = "U-Boot"; reg = <0x80000 0x1c0000>; }; - partition@0x1c0000 { + partition@1c0000 { label = "Environment"; reg = <0x240000 0x40000>; }; - partition@0x280000 { + partition@280000 { label = "Kernel"; reg = <0x280000 0x500000>; }; - partition@0x780000 { + partition@780000 { label = "Filesystem"; reg = <0x780000 0xf880000>; }; diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index ef9c90daa74b..a7385c338ee9 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -361,7 +361,7 @@ }; &cpu0 { - cpu0-supply = <&smps123_reg>; + vdd-supply = <&smps123_reg>; }; &omap_dwc3_2 { diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 3c8c0d743dd0..aabb86663f11 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -93,6 +93,8 @@ cooling-min-level = <0>; cooling-max-level = <2>; #cooling-cells = <2>; /* min followed by max */ + + vbb-supply = <&abb_mpu>; }; }; @@ -102,16 +104,26 @@ opp_nom-1000000000 { opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <1060000 850000 1150000>; + opp-microvolt = <1060000 850000 1150000>, + <1060000 850000 1150000>; opp-supported-hw = <0xFF 0x01>; opp-suspend; }; opp_od-1176000000 { opp-hz = /bits/ 64 <1176000000>; - opp-microvolt = <1160000 885000 1160000>; + opp-microvolt = <1160000 885000 1160000>, + <1160000 885000 1160000>; + opp-supported-hw = <0xFF 0x02>; }; + + opp_high@1500000000 { + opp-hz = /bits/ 64 <1500000000>; + opp-microvolt = <1210000 950000 1250000>, + <1210000 950000 1250000>; + opp-supported-hw = <0xFF 0x04>; + }; }; /* @@ -304,7 +316,6 @@ * node and enable pcie1_ep mode. */ pcie1_rc: pcie@51000000 { - compatible = "ti,dra7-pcie"; reg = <0x51000000 0x2000>, <0x51002000 0x14c>, <0x1000 0x2000>; reg-names = "rc_dbics", "ti_conf", "config"; interrupts = <0 232 0x4>, <0 233 0x4>; @@ -334,7 +345,6 @@ }; pcie1_ep: pcie_ep@51000000 { - compatible = "ti,dra7-pcie-ep"; reg = <0x51000000 0x28>, <0x51002000 0x14c>, <0x51001000 0x28>, <0x1000 0x10000000>; reg-names = "ep_dbics", "ti_conf", "ep_dbics2", "addr_space"; interrupts = <0 232 0x4>; @@ -356,8 +366,7 @@ ranges = <0x51800000 0x51800000 0x3000 0x0 0x30000000 0x10000000>; status = "disabled"; - pcie@51800000 { - compatible = "ti,dra7-pcie"; + pcie2_rc: pcie@51800000 { reg = <0x51800000 0x2000>, <0x51802000 0x14c>, <0x1000 0x2000>; reg-names = "rc_dbics", "ti_conf", "config"; interrupts = <0 355 0x4>, <0 356 0x4>; @@ -1386,7 +1395,7 @@ ranges; reg = <0x4a090000 0x20>; ti,hwmods = "ocp2scp3"; - sata_phy: phy@4A096000 { + sata_phy: phy@4a096000 { compatible = "ti,phy-pipe3-sata"; reg = <0x4A096000 0x80>, /* phy_rx */ <0x4A096400 0x64>, /* phy_tx */ @@ -2077,6 +2086,19 @@ clocks = <&l3_iclk_div>; clock-names = "fck"; }; + + opp_supply_mpu: opp-supply@4a003b20 { + compatible = "ti,omap5-opp-supply"; + reg = <0x4a003b20 0xc>; + ti,efuse-settings = < + /* uV offset */ + 1060000 0x0 + 1160000 0x4 + 1210000 0x8 + >; + ti,absolute-max-voltage-uv = <1500000>; + }; + }; thermal_zones: thermal-zones { diff --git a/arch/arm/boot/dts/dra72-evm-tps65917.dtsi b/arch/arm/boot/dts/dra72-evm-tps65917.dtsi index 57bfe5caf5e4..47bb90f41f3f 100644 --- a/arch/arm/boot/dts/dra72-evm-tps65917.dtsi +++ b/arch/arm/boot/dts/dra72-evm-tps65917.dtsi @@ -148,3 +148,7 @@ &mmc1 { vqmmc-supply = <&ldo1_reg>; }; + +&cpu0 { + vdd-supply = <&smps1_reg>; +}; diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi index a06d39919bf4..c011d2e64fef 100644 --- a/arch/arm/boot/dts/dra72x.dtsi +++ b/arch/arm/boot/dts/dra72x.dtsi @@ -50,3 +50,15 @@ status = "disabled"; }; }; + +&pcie1_rc { + compatible = "ti,dra726-pcie-rc", "ti,dra7-pcie"; +}; + +&pcie1_ep { + compatible = "ti,dra726-pcie-ep", "ti,dra7-pcie-ep"; +}; + +&pcie2_rc { + compatible = "ti,dra726-pcie-rc", "ti,dra7-pcie"; +}; diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi index 24ff17bae4c6..91e93ab588ca 100644 --- a/arch/arm/boot/dts/dra74x.dtsi +++ b/arch/arm/boot/dts/dra74x.dtsi @@ -124,3 +124,15 @@ status = "disabled"; }; }; + +&pcie1_rc { + compatible = "ti,dra746-pcie-rc", "ti,dra7-pcie"; +}; + +&pcie1_ep { + compatible = "ti,dra746-pcie-ep", "ti,dra7-pcie-ep"; +}; + +&pcie2_rc { + compatible = "ti,dra746-pcie-rc", "ti,dra7-pcie"; +}; diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts index f64aab450315..c4fe7f8ef72a 100644 --- a/arch/arm/boot/dts/dra76-evm.dts +++ b/arch/arm/boot/dts/dra76-evm.dts @@ -422,3 +422,19 @@ spi-max-frequency = <96000000>; }; }; + +&pcie2_phy { + status = "okay"; +}; + +&pcie1_rc { + num-lanes = <2>; + phys = <&pcie1_phy>, <&pcie2_phy>; + phy-names = "pcie-phy0", "pcie-phy1"; +}; + +&pcie1_ep { + num-lanes = <2>; + phys = <&pcie1_phy>, <&pcie2_phy>; + phy-names = "pcie-phy0", "pcie-phy1"; +}; diff --git a/arch/arm/boot/dts/omap3-cm-t3x.dtsi b/arch/arm/boot/dts/omap3-cm-t3x.dtsi index ab6003fe5a43..9dcb18d22cde 100644 --- a/arch/arm/boot/dts/omap3-cm-t3x.dtsi +++ b/arch/arm/boot/dts/omap3-cm-t3x.dtsi @@ -306,19 +306,19 @@ label = "xloader"; reg = <0 0x80000>; }; - partition@0x80000 { + partition@80000 { label = "uboot"; reg = <0x80000 0x1e0000>; }; - partition@0x260000 { + partition@260000 { label = "uboot environment"; reg = <0x260000 0x40000>; }; - partition@0x2a0000 { + partition@2a0000 { label = "linux"; reg = <0x2a0000 0x400000>; }; - partition@0x6a0000 { + partition@6a0000 { label = "rootfs"; reg = <0x6a0000 0x1f880000>; }; diff --git a/arch/arm/boot/dts/omap3-evm-37xx.dts b/arch/arm/boot/dts/omap3-evm-37xx.dts index 5a4ba0aea447..a14303b09ae2 100644 --- a/arch/arm/boot/dts/omap3-evm-37xx.dts +++ b/arch/arm/boot/dts/omap3-evm-37xx.dts @@ -90,19 +90,19 @@ label = "X-Loader"; reg = <0 0x80000>; }; - partition@0x80000 { + partition@80000 { label = "U-Boot"; reg = <0x80000 0x1c0000>; }; - partition@0x1c0000 { + partition@1c0000 { label = "Environment"; reg = <0x240000 0x40000>; }; - partition@0x280000 { + partition@280000 { label = "Kernel"; reg = <0x280000 0x500000>; }; - partition@0x780000 { + partition@780000 { label = "Filesystem"; reg = <0x780000 0x1f880000>; }; diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index 3dc56fb156b7..4170be70460e 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -86,7 +86,7 @@ /* lcd panel */ lcd: td028ttec1@0 { - compatible = "toppoly,td028ttec1"; + compatible = "tpo,td028ttec1"; reg = <0>; spi-max-frequency = <100000>; spi-cpol; diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi index 7ada1e93e166..cf7a2a72348d 100644 --- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi +++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi @@ -405,22 +405,22 @@ reg = <0 0x80000>; }; - partition@0x80000 { + partition@80000 { label = "u-boot"; reg = <0x80000 0x1e0000>; }; - partition@0x260000 { + partition@260000 { label = "u-boot-environment"; reg = <0x260000 0x20000>; }; - partition@0x280000 { + partition@280000 { label = "kernel"; reg = <0x280000 0x500000>; }; - partition@0x780000 { + partition@780000 { label = "filesystem"; reg = <0x780000 0xf880000>; }; diff --git a/arch/arm/boot/dts/omap3-n950.dts b/arch/arm/boot/dts/omap3-n950.dts index c354a1ed1e70..2354e09343f3 100644 --- a/arch/arm/boot/dts/omap3-n950.dts +++ b/arch/arm/boot/dts/omap3-n950.dts @@ -51,6 +51,26 @@ }; }; +&omap3_pmx_core { + dsi_pins: pinmux_dsi_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE1) /* dsi_dx0 - data0+ */ + OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE1) /* dsi_dy0 - data0- */ + OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE1) /* dsi_dx1 - clk+ */ + OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE1) /* dsi_dy1 - clk- */ + OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE1) /* dsi_dx2 - data1+ */ + OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE1) /* dsi_dy2 - data1- */ + >; + }; + + display_pins: pinmux_display_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20ca, PIN_INPUT | MUX_MODE4) /* gpio 62 - display te */ + OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE4) /* gpio 87 - display reset */ + >; + }; +}; + &i2c2 { smia_1: camera@10 { compatible = "nokia,smia"; @@ -186,3 +206,71 @@ st,max-limit-y = <32>; st,max-limit-z = <32>; }; + +&dss { + status = "ok"; + + vdda_video-supply = <&vdac>; +}; + +&dsi { + status = "ok"; + + pinctrl-names = "default"; + pinctrl-0 = <&dsi_pins>; + + vdd-supply = <&vpll2>; + + port { + dsi_out_ep: endpoint { + remote-endpoint = <&lcd0_in>; + lanes = <2 3 0 1 4 5>; + }; + }; + + lcd0: display { + compatible = "nokia,himalaya", "panel-dsi-cm"; + label = "lcd0"; + + pinctrl-names = "default"; + pinctrl-0 = <&display_pins>; + + vpnl-supply = <&vmmc2>; + vddi-supply = <&vio>; + + reset-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; /* 87 */ + te-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>; /* 62 */ + + width-mm = <49>; /* 48.960 mm */ + height-mm = <88>; /* 88.128 mm */ + + /* TODO: + * - panel is upside-down + * - top + bottom 5px are not visible + */ + panel-timing { + clock-frequency = <0>; /* Calculated by dsi */ + + hback-porch = <2>; + hactive = <480>; + hfront-porch = <0>; + hsync-len = <2>; + + vback-porch = <1>; + vactive = <864>; + vfront-porch = <0>; + vsync-len = <1>; + + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + port { + lcd0_in: endpoint { + remote-endpoint = <&dsi_out_ep>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap3-pandora-common.dtsi b/arch/arm/boot/dts/omap3-pandora-common.dtsi index cd53dc6c0051..f83b1029b3b7 100644 --- a/arch/arm/boot/dts/omap3-pandora-common.dtsi +++ b/arch/arm/boot/dts/omap3-pandora-common.dtsi @@ -627,7 +627,7 @@ lcd: lcd@1 { reg = <1>; /* CS1 */ - compatible = "omapdss,tpo,td043mtea1"; + compatible = "tpo,td043mtea1"; spi-max-frequency = <100000>; spi-cpol; spi-cpha; diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts index 24a463f8641f..b21084da490b 100644 --- a/arch/arm/boot/dts/omap4-droid4-xt894.dts +++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts @@ -177,6 +177,10 @@ vddi-supply = <&lcd_regulator>; reset-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* gpio101 */ + width-mm = <50>; + height-mm = <89>; + backlight = <&lcd_backlight>; + panel-timing { clock-frequency = <0>; /* Calculated by dsi */ @@ -346,7 +350,7 @@ enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>; - backlight { + lcd_backlight: backlight { compatible = "ti,lm3532-backlight"; lcd { diff --git a/include/dt-bindings/pinctrl/am43xx.h b/include/dt-bindings/pinctrl/am43xx.h index a69e310789c5..6ce4a32f77d4 100644 --- a/include/dt-bindings/pinctrl/am43xx.h +++ b/include/dt-bindings/pinctrl/am43xx.h @@ -25,7 +25,8 @@ #define DS0_FORCE_OFF_MODE (1 << 24) #define DS0_INPUT (1 << 25) #define DS0_FORCE_OUT_HIGH (1 << 26) -#define DS0_PULL_UP_DOWN_EN (1 << 27) +#define DS0_PULL_UP_DOWN_EN (0 << 27) +#define DS0_PULL_UP_DOWN_DIS (1 << 27) #define DS0_PULL_UP_SEL (1 << 28) #define WAKEUP_ENABLE (1 << 29) |
