summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/usb/dwc3/dwc3-exynos.c4
-rw-r--r--drivers/usb/dwc3/gadget.c2
-rw-r--r--drivers/usb/gadget/udc/net2272.c2
-rw-r--r--drivers/usb/musb/musb_gadget.c13
-rw-r--r--drivers/usb/musb/musbhsdma.c21
-rw-r--r--drivers/usb/phy/Kconfig2
-rw-r--r--drivers/usb/phy/phy-am335x.c5
-rw-r--r--drivers/usb/typec/tcpm/tcpm.c3
8 files changed, 20 insertions, 32 deletions
diff --git a/drivers/usb/dwc3/dwc3-exynos.c b/drivers/usb/dwc3/dwc3-exynos.c
index cb7fcd7c0ad8..c1e9ea621f41 100644
--- a/drivers/usb/dwc3/dwc3-exynos.c
+++ b/drivers/usb/dwc3/dwc3-exynos.c
@@ -78,7 +78,7 @@ static int dwc3_exynos_probe(struct platform_device *pdev)
for (i = 0; i < exynos->num_clks; i++) {
ret = clk_prepare_enable(exynos->clks[i]);
if (ret) {
- while (--i > 0)
+ while (i-- > 0)
clk_disable_unprepare(exynos->clks[i]);
return ret;
}
@@ -223,7 +223,7 @@ static int dwc3_exynos_resume(struct device *dev)
for (i = 0; i < exynos->num_clks; i++) {
ret = clk_prepare_enable(exynos->clks[i]);
if (ret) {
- while (--i > 0)
+ while (i-- > 0)
clk_disable_unprepare(exynos->clks[i]);
return ret;
}
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index bed2ff42780b..6c9b76bcc2e1 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1119,7 +1119,7 @@ static void dwc3_prepare_one_trb_linear(struct dwc3_ep *dep,
unsigned int maxp = usb_endpoint_maxp(dep->endpoint.desc);
unsigned int rem = length % maxp;
- if (rem && usb_endpoint_dir_out(dep->endpoint.desc)) {
+ if ((!length || rem) && usb_endpoint_dir_out(dep->endpoint.desc)) {
struct dwc3 *dwc = dep->dwc;
struct dwc3_trb *trb;
diff --git a/drivers/usb/gadget/udc/net2272.c b/drivers/usb/gadget/udc/net2272.c
index 660878a19505..b77f3126580e 100644
--- a/drivers/usb/gadget/udc/net2272.c
+++ b/drivers/usb/gadget/udc/net2272.c
@@ -2083,7 +2083,7 @@ static irqreturn_t net2272_irq(int irq, void *_dev)
#if defined(PLX_PCI_RDK2)
/* see if PCI int for us by checking irqstat */
intcsr = readl(dev->rdk2.fpga_base_addr + RDK2_IRQSTAT);
- if (!intcsr & (1 << NET2272_PCI_IRQ)) {
+ if (!(intcsr & (1 << NET2272_PCI_IRQ))) {
spin_unlock(&dev->lock);
return IRQ_NONE;
}
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index eae8b1b1b45b..ffe462a657b1 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -452,13 +452,10 @@ void musb_g_tx(struct musb *musb, u8 epnum)
}
if (request) {
- u8 is_dma = 0;
- bool short_packet = false;
trace_musb_req_tx(req);
if (dma && (csr & MUSB_TXCSR_DMAENAB)) {
- is_dma = 1;
csr |= MUSB_TXCSR_P_WZC_BITS;
csr &= ~(MUSB_TXCSR_DMAENAB | MUSB_TXCSR_P_UNDERRUN |
MUSB_TXCSR_TXPKTRDY | MUSB_TXCSR_AUTOSET);
@@ -476,16 +473,8 @@ void musb_g_tx(struct musb *musb, u8 epnum)
*/
if ((request->zero && request->length)
&& (request->length % musb_ep->packet_sz == 0)
- && (request->actual == request->length))
- short_packet = true;
+ && (request->actual == request->length)) {
- if ((musb_dma_inventra(musb) || musb_dma_ux500(musb)) &&
- (is_dma && (!dma->desired_mode ||
- (request->actual &
- (musb_ep->packet_sz - 1)))))
- short_packet = true;
-
- if (short_packet) {
/*
* On DMA completion, FIFO may not be
* available yet...
diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c
index a688f7f87829..5fc6825745f2 100644
--- a/drivers/usb/musb/musbhsdma.c
+++ b/drivers/usb/musb/musbhsdma.c
@@ -346,12 +346,10 @@ static irqreturn_t dma_controller_irq(int irq, void *private_data)
channel->status = MUSB_DMA_STATUS_FREE;
/* completed */
- if ((devctl & MUSB_DEVCTL_HM)
- && (musb_channel->transmit)
- && ((channel->desired_mode == 0)
- || (channel->actual_len &
- (musb_channel->max_packet_sz - 1)))
- ) {
+ if (musb_channel->transmit &&
+ (!channel->desired_mode ||
+ (channel->actual_len %
+ musb_channel->max_packet_sz))) {
u8 epnum = musb_channel->epnum;
int offset = musb->io.ep_offset(epnum,
MUSB_TXCSR);
@@ -363,11 +361,14 @@ static irqreturn_t dma_controller_irq(int irq, void *private_data)
*/
musb_ep_select(mbase, epnum);
txcsr = musb_readw(mbase, offset);
- txcsr &= ~(MUSB_TXCSR_DMAENAB
+ if (channel->desired_mode == 1) {
+ txcsr &= ~(MUSB_TXCSR_DMAENAB
| MUSB_TXCSR_AUTOSET);
- musb_writew(mbase, offset, txcsr);
- /* Send out the packet */
- txcsr &= ~MUSB_TXCSR_DMAMODE;
+ musb_writew(mbase, offset, txcsr);
+ /* Send out the packet */
+ txcsr &= ~MUSB_TXCSR_DMAMODE;
+ txcsr |= MUSB_TXCSR_DMAENAB;
+ }
txcsr |= MUSB_TXCSR_TXPKTRDY;
musb_writew(mbase, offset, txcsr);
}
diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index d7312eed6088..91ea3083e7ad 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -21,7 +21,7 @@ config AB8500_USB
config FSL_USB2_OTG
bool "Freescale USB OTG Transceiver Driver"
- depends on USB_EHCI_FSL && USB_FSL_USB2 && USB_OTG_FSM && PM
+ depends on USB_EHCI_FSL && USB_FSL_USB2 && USB_OTG_FSM=y && PM
depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't be 'y'
select USB_PHY
help
diff --git a/drivers/usb/phy/phy-am335x.c b/drivers/usb/phy/phy-am335x.c
index 27bdb7222527..f5f0568d8533 100644
--- a/drivers/usb/phy/phy-am335x.c
+++ b/drivers/usb/phy/phy-am335x.c
@@ -61,9 +61,6 @@ static int am335x_phy_probe(struct platform_device *pdev)
if (ret)
return ret;
- ret = usb_add_phy_dev(&am_phy->usb_phy_gen.phy);
- if (ret)
- return ret;
am_phy->usb_phy_gen.phy.init = am335x_init;
am_phy->usb_phy_gen.phy.shutdown = am335x_shutdown;
@@ -82,7 +79,7 @@ static int am335x_phy_probe(struct platform_device *pdev)
device_set_wakeup_enable(dev, false);
phy_ctrl_power(am_phy->phy_ctrl, am_phy->id, am_phy->dr_mode, false);
- return 0;
+ return usb_add_phy_dev(&am_phy->usb_phy_gen.phy);
}
static int am335x_phy_remove(struct platform_device *pdev)
diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c
index 4bc29b586698..f1c39a3c7534 100644
--- a/drivers/usb/typec/tcpm/tcpm.c
+++ b/drivers/usb/typec/tcpm/tcpm.c
@@ -2297,7 +2297,8 @@ static unsigned int tcpm_pd_select_pps_apdo(struct tcpm_port *port)
pdo_pps_apdo_max_voltage(snk));
port->pps_data.max_curr = min_pps_apdo_current(src, snk);
port->pps_data.out_volt = min(port->pps_data.max_volt,
- port->pps_data.out_volt);
+ max(port->pps_data.min_volt,
+ port->pps_data.out_volt));
port->pps_data.op_curr = min(port->pps_data.max_curr,
port->pps_data.op_curr);
}
OpenPOWER on IntegriCloud