ALSA: ctxfi: pr_* replaced with dev_*

pr_* macros replaced with dev_* as they are more preffered over pr_*.
each file which had pr_* was reviewed manually and replaced with dev_*.
here we have actually used the various snd_card which was added to some
structures of ctxfi via a previous patch of this series.

in the ctvmem.c file we have passed a reference of ct_atc as an
argument to get_vm_block function so that it can be used from
dev_*.

since dev_* will print the device information , so the prefix of
"ctxfi" from the various pr_* were also removed.

Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

1 files changed, 15 insertions, 9 deletions

diff --git a/sound/pci/ctxfi/cthw20k2.c b/sound/pci/ctxfi/cthw20k2.c
index b2c5d5a05a95..253899d13790 100644
--- a/sound/pci/ctxfi/cthw20k2.c
+++ b/sound/pci/ctxfi/cthw20k2.c
@@ -1187,7 +1187,8 @@ static int hw_daio_init(struct hw *hw, const struct daio_conf *info)
 		hw_write_20kx(hw, AUDIO_IO_TX_BLRCLK, 0x21212121);
 		hw_write_20kx(hw, AUDIO_IO_RX_BLRCLK, 0);
 	} else {
-		pr_alert("ctxfi: ERROR!!! Invalid sampling rate!!!\n");
+		dev_alert(hw->card->dev,
+			  "ERROR!!! Invalid sampling rate!!!\n");
 		return -EINVAL;
 	}
 
@@ -1246,7 +1247,8 @@ static int hw_trn_init(struct hw *hw, const struct trn_conf *info)
 
 	/* Set up device page table */
 	if ((~0UL) == info->vm_pgt_phys) {
-		pr_alert("ctxfi: Wrong device page table page address!!!\n");
+		dev_alert(hw->card->dev,
+			  "Wrong device page table page address!!!\n");
 		return -1;
 	}
 
@@ -1351,7 +1353,8 @@ static int hw_pll_init(struct hw *hw, unsigned int rsr)
 		break;
 	}
 	if (i >= 1000) {
-		pr_alert("ctxfi: PLL initialization failed!!!\n");
+		dev_alert(hw->card->dev,
+			  "PLL initialization failed!!!\n");
 		return -EBUSY;
 	}
 
@@ -1375,7 +1378,7 @@ static int hw_auto_init(struct hw *hw)
 			break;
 	}
 	if (!get_field(gctl, GCTL_AID)) {
-		pr_alert("ctxfi: Card Auto-init failed!!!\n");
+		dev_alert(hw->card->dev, "Card Auto-init failed!!!\n");
 		return -EBUSY;
 	}
 
@@ -1846,7 +1849,7 @@ static int hw_adc_init(struct hw *hw, const struct adc_conf *info)
 	/* Initialize I2C */
 	err = hw20k2_i2c_init(hw, 0x1A, 1, 1);
 	if (err < 0) {
-		pr_alert("ctxfi: Failure to acquire I2C!!!\n");
+		dev_alert(hw->card->dev, "Failure to acquire I2C!!!\n");
 		goto error;
 	}
 
@@ -1889,8 +1892,9 @@ static int hw_adc_init(struct hw *hw, const struct adc_conf *info)
 		hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_MMC, 0x0A),
 						MAKE_WM8775_DATA(0x0A));
 	} else {
-		pr_alert("ctxfi: Invalid master sampling rate (msr %d)!!!\n",
-			info->msr);
+		dev_alert(hw->card->dev,
+			  "Invalid master sampling rate (msr %d)!!!\n",
+			  info->msr);
 		err = -EINVAL;
 		goto error;
 	}
@@ -2033,7 +2037,8 @@ static int hw_card_start(struct hw *hw)
 	/* Set DMA transfer mask */
 	if (pci_set_dma_mask(pci, CT_XFI_DMA_MASK) < 0 ||
 	    pci_set_consistent_dma_mask(pci, CT_XFI_DMA_MASK) < 0) {
-		pr_err("ctxfi: architecture does not support PCI busmaster DMA with mask 0x%llx\n",
+		dev_err(hw->card->dev,
+			"architecture does not support PCI busmaster DMA with mask 0x%llx\n",
 			CT_XFI_DMA_MASK);
 		err = -ENXIO;
 		goto error1;
@@ -2062,7 +2067,8 @@ static int hw_card_start(struct hw *hw)
 		err = request_irq(pci->irq, ct_20k2_interrupt, IRQF_SHARED,
 				  KBUILD_MODNAME, hw);
 		if (err < 0) {
-			pr_err("XFi: Cannot get irq %d\n", pci->irq);
+			dev_err(hw->card->dev,
+				"XFi: Cannot get irq %d\n", pci->irq);
 			goto error2;
 		}
 		hw->irq = pci->irq;