Merge tag 'sound-4.15-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "There are no big surprising changes in this cycle, yet not too boring,
  either. The biggest change from diffstat POV is the removal of the
  legacy OSS driver codes that have been already disabled for a long
  time. This will bring a few trivial merge conflicts.

  As new features in ASoC side, there are two things: a new AC97 bus
  implementation and AMD Stony platform support. Both include the
  relevant changes shared with other subsystems, e.g. AC97 MFD changes
  and DRM AMD changes.

  Some other highlighted topics are:

   - A bunch of USB-audio drivers got the hardening against the
     malicious device accesses with a new helper code for endpoint
     sanity check

   - Lots of cleanups for ASoC Intel platform code, including support
     for their open source audio firmware

   - Continued ASoC core componentization works

   - Support for scaling MCLK with sample rate in ASoC simple-card

   - Stabler PCM hot-unplug capability, especially for ASoC usages"

* tag 'sound-4.15-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (302 commits)
  Documentation: sound: hd-audio: notes.rst
  ASoC: bcm2835: Support left/right justified and DSP modes
  ASoC: bcm2835: Enforce full symmetry
  ASoC: bcm2835: Support additional samplerates up to 384kHz
  ASoC: bcm2835: Add support for TDM modes
  ASoC: add mclk-fs support to audio graph card
  ASoC: add mclk-fs to audio graph card binding
  ASoC: rt5514: work around link error
  ASoC: rt5514: mark PM functions as __maybe_unused
  ASoC: rt5663: Check the JD status in the button pushing
  ASoC: amd: Modified DMA transfer Mechanism for Playback
  ASoC: rt5645: Wait for 400msec before concluding on value of RT5645_VENDOR_ID2
  ASoC: sun4i-codec: fixed 32bit audio capture support for H3/H2+
  ASoC: da7213: add support for DSP modes
  ASoC: sun8i-codec: Add a comment on the LRCK inversion
  ASoC: sun8i-codec: Set the BCLK divider
  ASoC: rt5663: Delay and retry reading rt5663 ID register
  ASoC: amd: use do_div rather than 64 bit division to fix 32 bit builds
  ASoC: cs42l56: Fix reset GPIO name in example DT binding
  ASoC: rt5514-spi: check irq status to schedule data copy in resume function
  ...

1 files changed, 0 insertions, 1097 deletions

diff --git a/sound/oss/sb_audio.c b/sound/oss/sb_audio.c
deleted file mode 100644
index dc91072f4d82..000000000000
--- a/sound/oss/sb_audio.c
+++ /dev/null
@@ -1,1097 +0,0 @@
-/*
- * sound/oss/sb_audio.c
- *
- * Audio routines for Sound Blaster compatible cards.
- *
- *
- * Copyright (C) by Hannu Savolainen 1993-1997
- *
- * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
- * Version 2 (June 1991). See the "COPYING" file distributed with this software
- * for more info.
- *
- * Changes
- *	Alan Cox	:	Formatting and clean ups
- *
- * Status
- *	Mostly working. Weird uart bug causing irq storms
- *
- * Daniel J. Rodriksson: Changes to make sb16 work full duplex.
- *                       Maybe other 16 bit cards in this code could behave
- *                       the same.
- * Chris Rankin:         Use spinlocks instead of CLI/STI
- */
-
-#include <linux/spinlock.h>
-
-#include "sound_config.h"
-
-#include "sb_mixer.h"
-#include "sb.h"
-
-#include "sb_ess.h"
-
-int sb_audio_open(int dev, int mode)
-{
-	sb_devc *devc = audio_devs[dev]->devc;
-	unsigned long flags;
-
-	if (devc == NULL)
-	{
-		  printk(KERN_ERR "Sound Blaster: incomplete initialization.\n");
-		  return -ENXIO;
-	}
-	if (devc->caps & SB_NO_RECORDING && mode & OPEN_READ)
-	{
-		if (mode == OPEN_READ)
-			return -EPERM;
-	}
-	spin_lock_irqsave(&devc->lock, flags);
-	if (devc->opened)
-	{
-		  spin_unlock_irqrestore(&devc->lock, flags);
-		  return -EBUSY;
-	}
-	if (devc->dma16 != -1 && devc->dma16 != devc->dma8 && !devc->duplex)
-	{
-		if (sound_open_dma(devc->dma16, "Sound Blaster 16 bit"))
-		{
-		  	spin_unlock_irqrestore(&devc->lock, flags);
-			return -EBUSY;
-		}
-	}
-	devc->opened = mode;
-	spin_unlock_irqrestore(&devc->lock, flags);
-
-	devc->irq_mode = IMODE_NONE;
-	devc->irq_mode_16 = IMODE_NONE;
-	devc->fullduplex = devc->duplex &&
-		((mode & OPEN_READ) && (mode & OPEN_WRITE));
-	sb_dsp_reset(devc);
-
-	/* At first glance this check isn't enough, some ESS chips might not 
-	 * have a RECLEV. However if they don't common_mixer_set will refuse 
-	 * cause devc->iomap has no register mapping for RECLEV
-	 */
-	if (devc->model == MDL_ESS) ess_mixer_reload (devc, SOUND_MIXER_RECLEV);
-
-	/* The ALS007 seems to require that the DSP be removed from the output */
-	/* in order for recording to be activated properly.  This is done by   */
-	/* setting the appropriate bits of the output control register 4ch to  */
-	/* zero.  This code assumes that the output control registers are not  */
-	/* used anywhere else and therefore the DSP bits are *always* ON for   */
-	/* output and OFF for sampling.                                        */
-
-	if (devc->submodel == SUBMDL_ALS007) 
-	{
-		if (mode & OPEN_READ) 
-			sb_setmixer(devc,ALS007_OUTPUT_CTRL2,
-				sb_getmixer(devc,ALS007_OUTPUT_CTRL2) & 0xf9);
-		else
-			sb_setmixer(devc,ALS007_OUTPUT_CTRL2,
-				sb_getmixer(devc,ALS007_OUTPUT_CTRL2) | 0x06);
-	}
-	return 0;
-}
-
-void sb_audio_close(int dev)
-{
-	sb_devc *devc = audio_devs[dev]->devc;
-
-	/* fix things if mmap turned off fullduplex */
-	if(devc->duplex
-	   && !devc->fullduplex
-	   && (devc->opened & OPEN_READ) && (devc->opened & OPEN_WRITE))
-		swap(audio_devs[dev]->dmap_out, audio_devs[dev]->dmap_in);
-
-	audio_devs[dev]->dmap_out->dma = devc->dma8;
-	audio_devs[dev]->dmap_in->dma = ( devc->duplex ) ?
-		devc->dma16 : devc->dma8;
-
-	if (devc->dma16 != -1 && devc->dma16 != devc->dma8 && !devc->duplex)
-		sound_close_dma(devc->dma16);
-
-	/* For ALS007, turn DSP output back on if closing the device for read */
-	
-	if ((devc->submodel == SUBMDL_ALS007) && (devc->opened & OPEN_READ)) 
-	{
-		sb_setmixer(devc,ALS007_OUTPUT_CTRL2,
-			sb_getmixer(devc,ALS007_OUTPUT_CTRL2) | 0x06);
-	}
-	devc->opened = 0;
-}
-
-static void sb_set_output_parms(int dev, unsigned long buf, int nr_bytes,
-		    int intrflag)
-{
-	sb_devc *devc = audio_devs[dev]->devc;
-
-	if (!devc->fullduplex || devc->bits == AFMT_S16_LE)
-	{
-		devc->trg_buf = buf;
-		devc->trg_bytes = nr_bytes;
-		devc->trg_intrflag = intrflag;
-		devc->irq_mode = IMODE_OUTPUT;
-	}
-	else
-	{
-		devc->trg_buf_16 = buf;
-		devc->trg_bytes_16 = nr_bytes;
-		devc->trg_intrflag_16 = intrflag;
-		devc->irq_mode_16 = IMODE_OUTPUT;
-	}
-}
-
-static void sb_set_input_parms(int dev, unsigned long buf, int count, int intrflag)
-{
-	sb_devc *devc = audio_devs[dev]->devc;
-
-	if (!devc->fullduplex || devc->bits != AFMT_S16_LE)
-	{
-		devc->trg_buf = buf;
-		devc->trg_bytes = count;
-		devc->trg_intrflag = intrflag;
-		devc->irq_mode = IMODE_INPUT;
-	}
-	else
-	{
-		devc->trg_buf_16 = buf;
-		devc->trg_bytes_16 = count;
-		devc->trg_intrflag_16 = intrflag;
-		devc->irq_mode_16 = IMODE_INPUT;
-	}
-}
-
-/*
- * SB1.x compatible routines 
- */
-
-static void sb1_audio_output_block(int dev, unsigned long buf, int nr_bytes, int intrflag)
-{
-	unsigned long flags;
-	int count = nr_bytes;
-	sb_devc *devc = audio_devs[dev]->devc;
-
-	/* DMAbuf_start_dma (dev, buf, count, DMA_MODE_WRITE); */
-
-	if (audio_devs[dev]->dmap_out->dma > 3)
-		count >>= 1;
-	count--;
-
-	devc->irq_mode = IMODE_OUTPUT;
-
-	spin_lock_irqsave(&devc->lock, flags);
-	if (sb_dsp_command(devc, 0x14))		/* 8 bit DAC using DMA */
-	{
-		sb_dsp_command(devc, (unsigned char) (count & 0xff));
-		sb_dsp_command(devc, (unsigned char) ((count >> 8) & 0xff));
-	}
-	else
-		printk(KERN_WARNING "Sound Blaster:  unable to start DAC.\n");
-	spin_unlock_irqrestore(&devc->lock, flags);
-	devc->intr_active = 1;
-}
-
-static void sb1_audio_start_input(int dev, unsigned long buf, int nr_bytes, int intrflag)
-{
-	unsigned long flags;
-	int count = nr_bytes;
-	sb_devc *devc = audio_devs[dev]->devc;
-
-	/*
-	 * Start a DMA input to the buffer pointed by dmaqtail
-	 */
-
-	/* DMAbuf_start_dma (dev, buf, count, DMA_MODE_READ); */
-
-	if (audio_devs[dev]->dmap_out->dma > 3)
-		count >>= 1;
-	count--;
-
-	devc->irq_mode = IMODE_INPUT;
-
-	spin_lock_irqsave(&devc->lock, flags);
-	if (sb_dsp_command(devc, 0x24))		/* 8 bit ADC using DMA */
-	{
-		sb_dsp_command(devc, (unsigned char) (count & 0xff));
-		sb_dsp_command(devc, (unsigned char) ((count >> 8) & 0xff));
-	}
-	else
-		printk(KERN_ERR "Sound Blaster:  unable to start ADC.\n");
-	spin_unlock_irqrestore(&devc->lock, flags);
-
-	devc->intr_active = 1;
-}
-
-static void sb1_audio_trigger(int dev, int bits)
-{
-	sb_devc *devc = audio_devs[dev]->devc;
-
-	bits &= devc->irq_mode;
-
-	if (!bits)
-		sb_dsp_command(devc, 0xd0);	/* Halt DMA */
-	else
-	{
-		switch (devc->irq_mode)
-		{
-			case IMODE_INPUT:
-				sb1_audio_start_input(dev, devc->trg_buf, devc->trg_bytes,
-						devc->trg_intrflag);
-				break;
-
-			case IMODE_OUTPUT:
-				sb1_audio_output_block(dev, devc->trg_buf, devc->trg_bytes,
-						devc->trg_intrflag);
-				break;
-		}
-	}
-	devc->trigger_bits = bits;
-}
-
-static int sb1_audio_prepare_for_input(int dev, int bsize, int bcount)
-{
-	sb_devc *devc = audio_devs[dev]->devc;
-	unsigned long flags;
-
-	spin_lock_irqsave(&devc->lock, flags);
-	if (sb_dsp_command(devc, 0x40))
-		sb_dsp_command(devc, devc->tconst);
-	sb_dsp_command(devc, DSP_CMD_SPKOFF);
-	spin_unlock_irqrestore(&devc->lock, flags);
-
-	devc->trigger_bits = 0;
-	return 0;
-}
-
-static int sb1_audio_prepare_for_output(int dev, int bsize, int bcount)
-{
-	sb_devc *devc = audio_devs[dev]->devc;
-	unsigned long flags;
-
-	spin_lock_irqsave(&devc->lock, flags);
-	if (sb_dsp_command(devc, 0x40))
-		sb_dsp_command(devc, devc->tconst);
-	sb_dsp_command(devc, DSP_CMD_SPKON);
-	spin_unlock_irqrestore(&devc->lock, flags);
-	devc->trigger_bits = 0;
-	return 0;
-}
-
-static int sb1_audio_set_speed(int dev, int speed)
-{
-	int max_speed = 23000;
-	sb_devc *devc = audio_devs[dev]->devc;
-	int tmp;
-
-	if (devc->opened & OPEN_READ)
-		max_speed = 13000;
-
-	if (speed > 0)
-	{
-		if (speed < 4000)
-			speed = 4000;
-
-		if (speed > max_speed)
-			speed = max_speed;
-
-		devc->tconst = (256 - ((1000000 + speed / 2) / speed)) & 0xff;
-		tmp = 256 - devc->tconst;
-		speed = (1000000 + tmp / 2) / tmp;
-
-		devc->speed = speed;
-	}
-	return devc->speed;
-}
-
-static short sb1_audio_set_channels(int dev, short channels)
-{
-	sb_devc *devc = audio_devs[dev]->devc;
-	return devc->channels = 1;
-}
-
-static unsigned int sb1_audio_set_bits(int dev, unsigned int bits)
-{
-	sb_devc        *devc = audio_devs[dev]->devc;
-	return devc->bits = 8;
-}
-
-static void sb1_audio_halt_xfer(int dev)
-{
-	unsigned long flags;
-	sb_devc *devc = audio_devs[dev]->devc;
-
-	spin_lock_irqsave(&devc->lock, flags);
-	sb_dsp_reset(devc);
-	spin_unlock_irqrestore(&devc->lock, flags);
-}
-
-/*
- * SB 2.0 and SB 2.01 compatible routines
- */
-
-static void sb20_audio_output_block(int dev, unsigned long buf, int nr_bytes,
-			int intrflag)
-{
-	unsigned long flags;
-	int count = nr_bytes;
-	sb_devc *devc = audio_devs[dev]->devc;
-	unsigned char cmd;
-
-	/* DMAbuf_start_dma (dev, buf, count, DMA_MODE_WRITE); */
-
-	if (audio_devs[dev]->dmap_out->dma > 3)
-		count >>= 1;
-	count--;
-
-	devc->irq_mode = IMODE_OUTPUT;
-
-	spin_lock_irqsave(&devc->lock, flags);
-	if (sb_dsp_command(devc, 0x48))		/* DSP Block size */
-	{
-		sb_dsp_command(devc, (unsigned char) (count & 0xff));
-		sb_dsp_command(devc, (unsigned char) ((count >> 8) & 0xff));
-
-		if (devc->speed * devc->channels <= 23000)
-			cmd = 0x1c;	/* 8 bit PCM output */
-		else
-			cmd = 0x90;	/* 8 bit high speed PCM output (SB2.01/Pro) */
-
-		if (!sb_dsp_command(devc, cmd))
-			printk(KERN_ERR "Sound Blaster:  unable to start DAC.\n");
-	}
-	else
-		printk(KERN_ERR "Sound Blaster: unable to start DAC.\n");
-	spin_unlock_irqrestore(&devc->lock, flags);
-	devc->intr_active = 1;
-}
-
-static void sb20_audio_start_input(int dev, unsigned long buf, int nr_bytes, int intrflag)
-{
-	unsigned long flags;
-	int count = nr_bytes;
-	sb_devc *devc = audio_devs[dev]->devc;
-	unsigned char cmd;
-
-	/*
-	 * Start a DMA input to the buffer pointed by dmaqtail
-	 */
-
-	/* DMAbuf_start_dma (dev, buf, count, DMA_MODE_READ); */
-
-	if (audio_devs[dev]->dmap_out->dma > 3)
-		count >>= 1;
-	count--;
-
-	devc->irq_mode = IMODE_INPUT;
-
-	spin_lock_irqsave(&devc->lock, flags);
-	if (sb_dsp_command(devc, 0x48))		/* DSP Block size */
-	{
-		sb_dsp_command(devc, (unsigned char) (count & 0xff));
-		sb_dsp_command(devc, (unsigned char) ((count >> 8) & 0xff));
-
-		if (devc->speed * devc->channels <= (devc->major == 3 ? 23000 : 13000))
-			cmd = 0x2c;	/* 8 bit PCM input */
-		else
-			cmd = 0x98;	/* 8 bit high speed PCM input (SB2.01/Pro) */
-
-		if (!sb_dsp_command(devc, cmd))
-			printk(KERN_ERR "Sound Blaster:  unable to start ADC.\n");
-	}
-	else
-		printk(KERN_ERR "Sound Blaster:  unable to start ADC.\n");
-	spin_unlock_irqrestore(&devc->lock, flags);
-	devc->intr_active = 1;
-}
-
-static void sb20_audio_trigger(int dev, int bits)
-{
-	sb_devc *devc = audio_devs[dev]->devc;
-	bits &= devc->irq_mode;
-
-	if (!bits)
-		sb_dsp_command(devc, 0xd0);	/* Halt DMA */
-	else
-	{
-		switch (devc->irq_mode)
-		{
-			case IMODE_INPUT:
-				sb20_audio_start_input(dev, devc->trg_buf, devc->trg_bytes,
-						devc->trg_intrflag);
-				break;
-
-			case IMODE_OUTPUT:
-				sb20_audio_output_block(dev, devc->trg_buf, devc->trg_bytes,
-						devc->trg_intrflag);
-			    break;
-		}
-	}
-	devc->trigger_bits = bits;
-}
-
-/*
- * SB2.01 specific speed setup
- */
-
-static int sb201_audio_set_speed(int dev, int speed)
-{
-	sb_devc *devc = audio_devs[dev]->devc;
-	int tmp;
-	int s;
-
-	if (speed > 0)
-	{
-		if (speed < 4000)
-			speed = 4000;
-		if (speed > 44100)
-			speed = 44100;
-		if (devc->opened & OPEN_READ && speed > 15000)
-			speed = 15000;
-		s = speed * devc->channels;
-		devc->tconst = (256 - ((1000000 + s / 2) / s)) & 0xff;
-		tmp = 256 - devc->tconst;
-		speed = ((1000000 + tmp / 2) / tmp) / devc->channels;
-
-		devc->speed = speed;
-	}
-	return devc->speed;
-}
-
-/*
- * SB Pro specific routines
- */
-
-static int sbpro_audio_prepare_for_input(int dev, int bsize, int bcount)
-{				/* For SB Pro and Jazz16 */
-	sb_devc *devc = audio_devs[dev]->devc;
-	unsigned long flags;
-	unsigned char bits = 0;
-
-	if (devc->dma16 >= 0 && devc->dma16 != devc->dma8)
-		audio_devs[dev]->dmap_out->dma = audio_devs[dev]->dmap_in->dma =
-			devc->bits == 16 ? devc->dma16 : devc->dma8;
-
-	if (devc->model == MDL_JAZZ || devc->model == MDL_SMW)
-		if (devc->bits == AFMT_S16_LE)
-			bits = 0x04;	/* 16 bit mode */
-
-	spin_lock_irqsave(&devc->lock, flags);
-	if (sb_dsp_command(devc, 0x40))
-		sb_dsp_command(devc, devc->tconst);
-	sb_dsp_command(devc, DSP_CMD_SPKOFF);
-	if (devc->channels == 1)
-		sb_dsp_command(devc, 0xa0 | bits);	/* Mono input */
-	else
-		sb_dsp_command(devc, 0xa8 | bits);	/* Stereo input */
-	spin_unlock_irqrestore(&devc->lock, flags);
-
-	devc->trigger_bits = 0;
-	return 0;
-}
-
-static int sbpro_audio_prepare_for_output(int dev, int bsize, int bcount)
-{				/* For SB Pro and Jazz16 */
-	sb_devc *devc = audio_devs[dev]->devc;
-	unsigned long flags;
-	unsigned char tmp;
-	unsigned char bits = 0;
-
-	if (devc->dma16 >= 0 && devc->dma16 != devc->dma8)
-		audio_devs[dev]->dmap_out->dma = audio_devs[dev]->dmap_in->dma = devc->bits == 16 ? devc->dma16 : devc->dma8;
-	if (devc->model == MDL_SBPRO)
-		sb_mixer_set_stereo(devc, devc->channels == 2);
-
-	spin_lock_irqsave(&devc->lock, flags);
-	if (sb_dsp_command(devc, 0x40))
-		sb_dsp_command(devc, devc->tconst);
-	sb_dsp_command(devc, DSP_CMD_SPKON);
-
-	if (devc->model == MDL_JAZZ || devc->model == MDL_SMW)
-	{
-		if (devc->bits == AFMT_S16_LE)
-			bits = 0x04;	/* 16 bit mode */
-
-		if (devc->channels == 1)
-			sb_dsp_command(devc, 0xa0 | bits);	/* Mono output */
-		else
-			sb_dsp_command(devc, 0xa8 | bits);	/* Stereo output */
-		spin_unlock_irqrestore(&devc->lock, flags);
-	}
-	else
-	{
-		spin_unlock_irqrestore(&devc->lock, flags);
-		tmp = sb_getmixer(devc, 0x0e);
-		if (devc->channels == 1)
-			tmp &= ~0x02;
-		else
-			tmp |= 0x02;
-		sb_setmixer(devc, 0x0e, tmp);
-	}
-	devc->trigger_bits = 0;
-	return 0;
-}
-
-static int sbpro_audio_set_speed(int dev, int speed)
-{
-	sb_devc *devc = audio_devs[dev]->devc;
-
-	if (speed > 0)
-	{
-		if (speed < 4000)
-			speed = 4000;
-		if (speed > 44100)
-			speed = 44100;
-		if (devc->channels > 1 && speed > 22050)
-			speed = 22050;
-		sb201_audio_set_speed(dev, speed);
-	}
-	return devc->speed;
-}
-
-static short sbpro_audio_set_channels(int dev, short channels)
-{
-	sb_devc *devc = audio_devs[dev]->devc;
-
-	if (channels == 1 || channels == 2)
-	{
-		if (channels != devc->channels)
-		{
-			devc->channels = channels;
-			if (devc->model == MDL_SBPRO && devc->channels == 2)
-				sbpro_audio_set_speed(dev, devc->speed);
-		}
-	}
-	return devc->channels;
-}
-
-static int jazz16_audio_set_speed(int dev, int speed)
-{
-	sb_devc *devc = audio_devs[dev]->devc;
-
-	if (speed > 0)
-	{
-		int tmp;
-		int s;
-
-		if (speed < 5000)
-			speed = 5000;
-		if (speed > 44100)
-			speed = 44100;
-
-		s = speed * devc->channels;
-
-		devc->tconst = (256 - ((1000000 + s / 2) / s)) & 0xff;
-
-		tmp = 256 - devc->tconst;
-		speed = ((1000000 + tmp / 2) / tmp) / devc->channels;
-
-		devc->speed = speed;
-	}
-	return devc->speed;
-}
-
-/*
- * SB16 specific routines
- */
-
-static int sb16_audio_set_speed(int dev, int speed)
-{
-	sb_devc *devc = audio_devs[dev]->devc;
-	int	max_speed = devc->submodel == SUBMDL_ALS100 ? 48000 : 44100;
-
-	if (speed > 0)
-	{
-		if (speed < 5000)
-			speed = 5000;
-
-		if (speed > max_speed)
-			speed = max_speed;
-
-		devc->speed = speed;
-	}
-	return devc->speed;
-}
-
-static unsigned int sb16_audio_set_bits(int dev, unsigned int bits)
-{
-	sb_devc *devc = audio_devs[dev]->devc;
-
-	if (bits != 0)
-	{
-		if (bits == AFMT_U8 || bits == AFMT_S16_LE)
-			devc->bits = bits;
-		else
-			devc->bits = AFMT_U8;
-	}
-
-	return devc->bits;
-}
-
-static int sb16_audio_prepare_for_input(int dev, int bsize, int bcount)
-{
-	sb_devc *devc = audio_devs[dev]->devc;
-
-	if (!devc->fullduplex)
-	{
-		audio_devs[dev]->dmap_out->dma =
-			audio_devs[dev]->dmap_in->dma =
-				devc->bits == AFMT_S16_LE ?
-					devc->dma16 : devc->dma8;
-	}
-	else if (devc->bits == AFMT_S16_LE)
-	{
-		audio_devs[dev]->dmap_out->dma = devc->dma8;
-		audio_devs[dev]->dmap_in->dma = devc->dma16;
-	}
-	else
-	{
-		audio_devs[dev]->dmap_out->dma = devc->dma16;
-		audio_devs[dev]->dmap_in->dma = devc->dma8;
-	}
-
-	devc->trigger_bits = 0;
-	return 0;
-}
-
-static int sb16_audio_prepare_for_output(int dev, int bsize, int bcount)
-{
-	sb_devc *devc = audio_devs[dev]->devc;
-
-	if (!devc->fullduplex)
-	{
-		audio_devs[dev]->dmap_out->dma =
-			audio_devs[dev]->dmap_in->dma =
-				devc->bits == AFMT_S16_LE ?
-					devc->dma16 : devc->dma8;
-	}
-	else if (devc->bits == AFMT_S16_LE)
-	{
-		audio_devs[dev]->dmap_out->dma = devc->dma8;
-		audio_devs[dev]->dmap_in->dma = devc->dma16;
-	}
-	else
-	{
-		audio_devs[dev]->dmap_out->dma = devc->dma16;
-		audio_devs[dev]->dmap_in->dma = devc->dma8;
-	}
-
-	devc->trigger_bits = 0;
-	return 0;
-}
-
-static void sb16_audio_output_block(int dev, unsigned long buf, int count,
-			int intrflag)
-{
-	unsigned long   flags, cnt;
-	sb_devc        *devc = audio_devs[dev]->devc;
-	unsigned long   bits;
-
-	if (!devc->fullduplex || devc->bits == AFMT_S16_LE)
-	{
-		devc->irq_mode = IMODE_OUTPUT;
-		devc->intr_active = 1;
-	}
-	else
-	{
-		devc->irq_mode_16 = IMODE_OUTPUT;
-		devc->intr_active_16 = 1;
-	}
-
-	/* save value */
-	spin_lock_irqsave(&devc->lock, flags);
-	bits = devc->bits;
-	if (devc->fullduplex)
-		devc->bits = (devc->bits == AFMT_S16_LE) ?
-			AFMT_U8 : AFMT_S16_LE;
-	spin_unlock_irqrestore(&devc->lock, flags);
-
-	cnt = count;
-	if (devc->bits == AFMT_S16_LE)
-		cnt >>= 1;
-	cnt--;
-
-	spin_lock_irqsave(&devc->lock, flags);
-
-	/* DMAbuf_start_dma (dev, buf, count, DMA_MODE_WRITE); */
-
-	sb_dsp_command(devc, 0x41);
-	sb_dsp_command(devc, (unsigned char) ((devc->speed >> 8) & 0xff));
-	sb_dsp_command(devc, (unsigned char) (devc->speed & 0xff));
-
-	sb_dsp_command(devc, (devc->bits == AFMT_S16_LE ? 0xb6 : 0xc6));
-	sb_dsp_command(devc, ((devc->channels == 2 ? 0x20 : 0) +
-			      (devc->bits == AFMT_S16_LE ? 0x10 : 0)));
-	sb_dsp_command(devc, (unsigned char) (cnt & 0xff));
-	sb_dsp_command(devc, (unsigned char) (cnt >> 8));
-
-	/* restore real value after all programming */
-	devc->bits = bits;
-	spin_unlock_irqrestore(&devc->lock, flags);
-}
-
-
-/*
- *	This fails on the Cyrix MediaGX. If you don't have the DMA enabled
- *	before the first sample arrives it locks up. However even if you
- *	do enable the DMA in time you just get DMA timeouts and missing
- *	interrupts and stuff, so for now I've not bothered fixing this either.
- */
- 
-static void sb16_audio_start_input(int dev, unsigned long buf, int count, int intrflag)
-{
-	unsigned long   flags, cnt;
-	sb_devc        *devc = audio_devs[dev]->devc;
-
-	if (!devc->fullduplex || devc->bits != AFMT_S16_LE)
-	{
-		devc->irq_mode = IMODE_INPUT;
-		devc->intr_active = 1;
-	}
-	else
-	{
-		devc->irq_mode_16 = IMODE_INPUT;
-		devc->intr_active_16 = 1;
-	}
-
-	cnt = count;
-	if (devc->bits == AFMT_S16_LE)
-		cnt >>= 1;
-	cnt--;
-
-	spin_lock_irqsave(&devc->lock, flags);
-
-	/* DMAbuf_start_dma (dev, buf, count, DMA_MODE_READ); */
-
-	sb_dsp_command(devc, 0x42);
-	sb_dsp_command(devc, (unsigned char) ((devc->speed >> 8) & 0xff));
-	sb_dsp_command(devc, (unsigned char) (devc->speed & 0xff));
-
-	sb_dsp_command(devc, (devc->bits == AFMT_S16_LE ? 0xbe : 0xce));
-	sb_dsp_command(devc, ((devc->channels == 2 ? 0x20 : 0) +
-			      (devc->bits == AFMT_S16_LE ? 0x10 : 0)));
-	sb_dsp_command(devc, (unsigned char) (cnt & 0xff));
-	sb_dsp_command(devc, (unsigned char) (cnt >> 8));
-
-	spin_unlock_irqrestore(&devc->lock, flags);
-}
-
-static void sb16_audio_trigger(int dev, int bits)
-{
-	sb_devc *devc = audio_devs[dev]->devc;
-
-	int bits_16 = bits & devc->irq_mode_16;
-	bits &= devc->irq_mode;
-
-	if (!bits && !bits_16)
-		sb_dsp_command(devc, 0xd0);	/* Halt DMA */
-	else
-	{
-		if (bits)
-		{
-			switch (devc->irq_mode)
-			{
-				case IMODE_INPUT:
-					sb16_audio_start_input(dev,
-							devc->trg_buf,
-							devc->trg_bytes,
-							devc->trg_intrflag);
-					break;
-
-				case IMODE_OUTPUT:
-					sb16_audio_output_block(dev,
-							devc->trg_buf,
-							devc->trg_bytes,
-							devc->trg_intrflag);
-					break;
-			}
-		}
-		if (bits_16)
-		{
-			switch (devc->irq_mode_16)
-			{
-				case IMODE_INPUT:
-					sb16_audio_start_input(dev,
-							devc->trg_buf_16,
-							devc->trg_bytes_16,
-							devc->trg_intrflag_16);
-					break;
-
-				case IMODE_OUTPUT:
-					sb16_audio_output_block(dev,
-							devc->trg_buf_16,
-							devc->trg_bytes_16,
-							devc->trg_intrflag_16);
-					break;
-			}
-		}
-	}
-
-	devc->trigger_bits = bits | bits_16;
-}
-
-static unsigned char lbuf8[2048];
-static signed short *lbuf16 = (signed short *)lbuf8;
-#define LBUFCOPYSIZE 1024
-static void
-sb16_copy_from_user(int dev,
-		char *localbuf, int localoffs,
-		const char __user *userbuf, int useroffs,
-		int max_in, int max_out,
-		int *used, int *returned,
-		int len)
-{
-	sb_devc       *devc = audio_devs[dev]->devc;
-	int           i, c, p, locallen;
-	unsigned char *buf8;
-	signed short  *buf16;
-
-	/* if not duplex no conversion */
-	if (!devc->fullduplex)
-	{
-		if (copy_from_user(localbuf + localoffs,
-				   userbuf + useroffs, len))
-			return;
-		*used = len;
-		*returned = len;
-	}
-	else if (devc->bits == AFMT_S16_LE)
-	{
-		/* 16 -> 8 */
-		/* max_in >> 1, max number of samples in ( 16 bits ) */
-		/* max_out, max number of samples out ( 8 bits ) */
-		/* len, number of samples that will be taken ( 16 bits )*/
-		/* c, count of samples remaining in buffer ( 16 bits )*/
-		/* p, count of samples already processed ( 16 bits )*/
-		len = ( (max_in >> 1) > max_out) ? max_out : (max_in >> 1);
-		c = len;
-		p = 0;
-		buf8 = (unsigned char *)(localbuf + localoffs);
-		while (c)
-		{
-			locallen = (c >= LBUFCOPYSIZE ? LBUFCOPYSIZE : c);
-			/* << 1 in order to get 16 bit samples */
-			if (copy_from_user(lbuf16,
-					   userbuf + useroffs + (p << 1),
-					   locallen << 1))
-				return;
-			for (i = 0; i < locallen; i++)
-			{
-				buf8[p+i] = ~((lbuf16[i] >> 8) & 0xff) ^ 0x80;
-			}
-			c -= locallen; p += locallen;
-		}
-		/* used = ( samples * 16 bits size ) */
-		*used =  max_in  > ( max_out << 1) ? (max_out << 1) : max_in;
-		/* returned = ( samples * 8 bits size ) */
-		*returned = len;
-	}
-	else
-	{
-		/* 8 -> 16 */
-		/* max_in, max number of samples in ( 8 bits ) */
-		/* max_out >> 1, max number of samples out ( 16 bits ) */
-		/* len, number of samples that will be taken ( 8 bits )*/
-		/* c, count of samples remaining in buffer ( 8 bits )*/
-		/* p, count of samples already processed ( 8 bits )*/
-		len = max_in > (max_out >> 1) ? (max_out >> 1) : max_in;
-		c = len;
-		p = 0;
-		buf16 = (signed short *)(localbuf + localoffs);
-		while (c)
-		{
-			locallen = (c >= LBUFCOPYSIZE ? LBUFCOPYSIZE : c);
-			if (copy_from_user(lbuf8,
-					   userbuf+useroffs + p,
-					   locallen))
-				return;
-			for (i = 0; i < locallen; i++)
-			{
-				buf16[p+i] = (~lbuf8[i] ^ 0x80) << 8;
-			}
-	      		c -= locallen; p += locallen;
-		}
-		/* used = ( samples * 8 bits size ) */
-		*used = len;
-		/* returned = ( samples * 16 bits size ) */
-		*returned = len << 1;
-	}
-}
-
-static void
-sb16_audio_mmap(int dev)
-{
-	sb_devc       *devc = audio_devs[dev]->devc;
-	devc->fullduplex = 0;
-}
-
-static struct audio_driver sb1_audio_driver =	/* SB1.x */
-{
-	.owner			= THIS_MODULE,
-	.open			= sb_audio_open,
-	.close			= sb_audio_close,
-	.output_block		= sb_set_output_parms,
-	.start_input		= sb_set_input_parms,
-	.prepare_for_input	= sb1_audio_prepare_for_input,
-	.prepare_for_output	= sb1_audio_prepare_for_output,
-	.halt_io		= sb1_audio_halt_xfer,
-	.trigger		= sb1_audio_trigger,
-	.set_speed		= sb1_audio_set_speed,
-	.set_bits		= sb1_audio_set_bits,
-	.set_channels		= sb1_audio_set_channels
-};
-
-static struct audio_driver sb20_audio_driver =	/* SB2.0 */
-{
-	.owner			= THIS_MODULE,
-	.open			= sb_audio_open,
-	.close			= sb_audio_close,
-	.output_block		= sb_set_output_parms,
-	.start_input		= sb_set_input_parms,
-	.prepare_for_input	= sb1_audio_prepare_for_input,
-	.prepare_for_output	= sb1_audio_prepare_for_output,
-	.halt_io		= sb1_audio_halt_xfer,
-	.trigger		= sb20_audio_trigger,
-	.set_speed		= sb1_audio_set_speed,
-	.set_bits		= sb1_audio_set_bits,
-	.set_channels		= sb1_audio_set_channels
-};
-
-static struct audio_driver sb201_audio_driver =		/* SB2.01 */
-{
-	.owner			= THIS_MODULE,
-	.open			= sb_audio_open,
-	.close			= sb_audio_close,
-	.output_block		= sb_set_output_parms,
-	.start_input		= sb_set_input_parms,
-	.prepare_for_input	= sb1_audio_prepare_for_input,
-	.prepare_for_output	= sb1_audio_prepare_for_output,
-	.halt_io		= sb1_audio_halt_xfer,
-	.trigger		= sb20_audio_trigger,
-	.set_speed		= sb201_audio_set_speed,
-	.set_bits		= sb1_audio_set_bits,
-	.set_channels		= sb1_audio_set_channels
-};
-
-static struct audio_driver sbpro_audio_driver =		/* SB Pro */
-{
-	.owner			= THIS_MODULE,
-	.open			= sb_audio_open,
-	.close			= sb_audio_close,
-	.output_block		= sb_set_output_parms,
-	.start_input		= sb_set_input_parms,
-	.prepare_for_input	= sbpro_audio_prepare_for_input,
-	.prepare_for_output	= sbpro_audio_prepare_for_output,
-	.halt_io		= sb1_audio_halt_xfer,
-	.trigger		= sb20_audio_trigger,
-	.set_speed		= sbpro_audio_set_speed,
-	.set_bits		= sb1_audio_set_bits,
-	.set_channels		= sbpro_audio_set_channels
-};
-
-static struct audio_driver jazz16_audio_driver =	/* Jazz16 and SM Wave */
-{
-	.owner			= THIS_MODULE,
-	.open			= sb_audio_open,
-	.close			= sb_audio_close,
-	.output_block		= sb_set_output_parms,
-	.start_input		= sb_set_input_parms,
-	.prepare_for_input	= sbpro_audio_prepare_for_input,
-	.prepare_for_output	= sbpro_audio_prepare_for_output,
-	.halt_io		= sb1_audio_halt_xfer,
-	.trigger		= sb20_audio_trigger,
-	.set_speed		= jazz16_audio_set_speed,
-	.set_bits		= sb16_audio_set_bits,
-	.set_channels		= sbpro_audio_set_channels
-};
-
-static struct audio_driver sb16_audio_driver =	/* SB16 */
-{
-	.owner			= THIS_MODULE,
-	.open			= sb_audio_open,
-	.close			= sb_audio_close,
-	.output_block		= sb_set_output_parms,
-	.start_input		= sb_set_input_parms,
-	.prepare_for_input	= sb16_audio_prepare_for_input,
-	.prepare_for_output	= sb16_audio_prepare_for_output,
-	.halt_io		= sb1_audio_halt_xfer,
-	.copy_user		= sb16_copy_from_user,
-	.trigger		= sb16_audio_trigger,
-	.set_speed		= sb16_audio_set_speed,
-	.set_bits		= sb16_audio_set_bits,
-	.set_channels		= sbpro_audio_set_channels,
-	.mmap			= sb16_audio_mmap
-};
-
-void sb_audio_init(sb_devc * devc, char *name, struct module *owner)
-{
-	int audio_flags = 0;
-	int format_mask = AFMT_U8;
-
-	struct audio_driver *driver = &sb1_audio_driver;
-
-	switch (devc->model)
-	{
-		case MDL_SB1:	/* SB1.0 or SB 1.5 */
-			DDB(printk("Will use standard SB1.x driver\n"));
-			audio_flags = DMA_HARDSTOP;
-			break;
-
-		case MDL_SB2:
-			DDB(printk("Will use SB2.0 driver\n"));
-			audio_flags = DMA_AUTOMODE;
-			driver = &sb20_audio_driver;
-			break;
-
-		case MDL_SB201:
-			DDB(printk("Will use SB2.01 (high speed) driver\n"));
-			audio_flags = DMA_AUTOMODE;
-			driver = &sb201_audio_driver;
-			break;
-
-		case MDL_JAZZ:
-		case MDL_SMW:
-			DDB(printk("Will use Jazz16 driver\n"));
-			audio_flags = DMA_AUTOMODE;
-			format_mask |= AFMT_S16_LE;
-			driver = &jazz16_audio_driver;
-			break;
-
-		case MDL_ESS:
-			DDB(printk("Will use ESS ES688/1688 driver\n"));
-			driver = ess_audio_init (devc, &audio_flags, &format_mask);
-			break;
-
-		case MDL_SB16:
-			DDB(printk("Will use SB16 driver\n"));
-			audio_flags = DMA_AUTOMODE;
-			format_mask |= AFMT_S16_LE;
-			if (devc->dma8 != devc->dma16 && devc->dma16 != -1)
-			{
-				audio_flags |= DMA_DUPLEX;
-				devc->duplex = 1;
-			}
-			driver = &sb16_audio_driver;
-			break;
-
-		default:
-			DDB(printk("Will use SB Pro driver\n"));
-			audio_flags = DMA_AUTOMODE;
-			driver = &sbpro_audio_driver;
-	}
-
-	if (owner)
-			driver->owner = owner;
-	
-	if ((devc->dev = sound_install_audiodrv(AUDIO_DRIVER_VERSION,
-				name,driver, sizeof(struct audio_driver),
-				audio_flags, format_mask, devc,
-				devc->dma8,
-				devc->duplex ? devc->dma16 : devc->dma8)) < 0)
-	{
-		  printk(KERN_ERR "Sound Blaster:  unable to install audio.\n");
-		  return;
-	}
-	audio_devs[devc->dev]->mixer_dev = devc->my_mixerdev;
-	audio_devs[devc->dev]->min_fragment = 5;
-}