Merge tag 'sound-4.15-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "There are no big surprising changes in this cycle, yet not too boring,
  either. The biggest change from diffstat POV is the removal of the
  legacy OSS driver codes that have been already disabled for a long
  time. This will bring a few trivial merge conflicts.

  As new features in ASoC side, there are two things: a new AC97 bus
  implementation and AMD Stony platform support. Both include the
  relevant changes shared with other subsystems, e.g. AC97 MFD changes
  and DRM AMD changes.

  Some other highlighted topics are:

   - A bunch of USB-audio drivers got the hardening against the
     malicious device accesses with a new helper code for endpoint
     sanity check

   - Lots of cleanups for ASoC Intel platform code, including support
     for their open source audio firmware

   - Continued ASoC core componentization works

   - Support for scaling MCLK with sample rate in ASoC simple-card

   - Stabler PCM hot-unplug capability, especially for ASoC usages"

* tag 'sound-4.15-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (302 commits)
  Documentation: sound: hd-audio: notes.rst
  ASoC: bcm2835: Support left/right justified and DSP modes
  ASoC: bcm2835: Enforce full symmetry
  ASoC: bcm2835: Support additional samplerates up to 384kHz
  ASoC: bcm2835: Add support for TDM modes
  ASoC: add mclk-fs support to audio graph card
  ASoC: add mclk-fs to audio graph card binding
  ASoC: rt5514: work around link error
  ASoC: rt5514: mark PM functions as __maybe_unused
  ASoC: rt5663: Check the JD status in the button pushing
  ASoC: amd: Modified DMA transfer Mechanism for Playback
  ASoC: rt5645: Wait for 400msec before concluding on value of RT5645_VENDOR_ID2
  ASoC: sun4i-codec: fixed 32bit audio capture support for H3/H2+
  ASoC: da7213: add support for DSP modes
  ASoC: sun8i-codec: Add a comment on the LRCK inversion
  ASoC: sun8i-codec: Set the BCLK divider
  ASoC: rt5663: Delay and retry reading rt5663 ID register
  ASoC: amd: use do_div rather than 64 bit division to fix 32 bit builds
  ASoC: cs42l56: Fix reset GPIO name in example DT binding
  ASoC: rt5514-spi: check irq status to schedule data copy in resume function
  ...

1 files changed, 0 insertions, 458 deletions

diff --git a/sound/oss/pas2_card.c b/sound/oss/pas2_card.c
deleted file mode 100644
index 769fca692d2a..000000000000
--- a/sound/oss/pas2_card.c
+++ /dev/null
@@ -1,458 +0,0 @@
-/*
- * sound/oss/pas2_card.c
- *
- * Detection routine for the Pro Audio Spectrum cards.
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include "sound_config.h"
-
-#include "pas2.h"
-#include "sb.h"
-
-static unsigned char dma_bits[] = {
-	4, 1, 2, 3, 0, 5, 6, 7
-};
-
-static unsigned char irq_bits[] = {
-	0, 0, 1, 2, 3, 4, 5, 6, 0, 1, 7, 8, 9, 0, 10, 11
-};
-
-static unsigned char sb_irq_bits[] = {
-	0x00, 0x00, 0x08, 0x10, 0x00, 0x18, 0x00, 0x20, 
-	0x00, 0x08, 0x28, 0x30, 0x38, 0, 0
-};
-
-static unsigned char sb_dma_bits[] = {
-	0x00, 0x40, 0x80, 0xC0, 0, 0, 0, 0
-};
-
-/*
- * The Address Translation code is used to convert I/O register addresses to
- * be relative to the given base -register
- */
-
-int      	pas_translate_code = 0;
-static int      pas_intr_mask;
-static int      pas_irq;
-static int      pas_sb_base;
-DEFINE_SPINLOCK(pas_lock);
-#ifndef CONFIG_PAS_JOYSTICK
-static bool	joystick;
-#else
-static bool 	joystick = 1;
-#endif
-#ifdef SYMPHONY_PAS
-static bool 	symphony = 1;
-#else
-static bool 	symphony;
-#endif
-#ifdef BROKEN_BUS_CLOCK
-static bool	broken_bus_clock = 1;
-#else
-static bool	broken_bus_clock;
-#endif
-
-static struct address_info cfg;
-static struct address_info cfg2;
-
-char            pas_model = 0;
-static char    *pas_model_names[] = {
-	"", 
-	"Pro AudioSpectrum+", 
-	"CDPC", 
-	"Pro AudioSpectrum 16", 
-	"Pro AudioSpectrum 16D"
-};
-
-/*
- * pas_read() and pas_write() are equivalents of inb and outb 
- * These routines perform the I/O address translation required
- * to support other than the default base address
- */
-
-unsigned char pas_read(int ioaddr)
-{
-	return inb(ioaddr + pas_translate_code);
-}
-
-void pas_write(unsigned char data, int ioaddr)
-{
-	outb((data), ioaddr + pas_translate_code);
-}
-
-/******************* Begin of the Interrupt Handler ********************/
-
-static irqreturn_t pasintr(int irq, void *dev_id)
-{
-	int             status;
-
-	status = pas_read(0x0B89);
-	pas_write(status, 0x0B89);	/* Clear interrupt */
-
-	if (status & 0x08)
-	{
-		  pas_pcm_interrupt(status, 1);
-		  status &= ~0x08;
-	}
-	if (status & 0x10)
-	{
-		  pas_midi_interrupt();
-		  status &= ~0x10;
-	}
-	return IRQ_HANDLED;
-}
-
-int pas_set_intr(int mask)
-{
-	if (!mask)
-		return 0;
-
-	pas_intr_mask |= mask;
-
-	pas_write(pas_intr_mask, 0x0B8B);
-	return 0;
-}
-
-int pas_remove_intr(int mask)
-{
-	if (!mask)
-		return 0;
-
-	pas_intr_mask &= ~mask;
-	pas_write(pas_intr_mask, 0x0B8B);
-
-	return 0;
-}
-
-/******************* End of the Interrupt handler **********************/
-
-/******************* Begin of the Initialization Code ******************/
-
-static int __init config_pas_hw(struct address_info *hw_config)
-{
-	char            ok = 1;
-	unsigned        int_ptrs;	/* scsi/sound interrupt pointers */
-
-	pas_irq = hw_config->irq;
-
-	pas_write(0x00, 0x0B8B);
-	pas_write(0x36, 0x138B);
-	pas_write(0x36, 0x1388);
-	pas_write(0, 0x1388);
-	pas_write(0x74, 0x138B);
-	pas_write(0x74, 0x1389);
-	pas_write(0, 0x1389);
-
-	pas_write(0x80 | 0x40 | 0x20 | 1, 0x0B8A);
-	pas_write(0x80 | 0x20 | 0x10 | 0x08 | 0x01, 0xF8A);
-	pas_write(0x01 | 0x02 | 0x04 | 0x10	/*
-						 * |
-						 * 0x80
-						 */ , 0xB88);
-
-	pas_write(0x80 | (joystick ? 0x40 : 0), 0xF388);
-
-	if (pas_irq < 0 || pas_irq > 15)
-	{
-		printk(KERN_ERR "PAS16: Invalid IRQ %d", pas_irq);
-		hw_config->irq=-1;
-		ok = 0;
-	}
-	else
-	{
-		int_ptrs = pas_read(0xF38A);
-		int_ptrs = (int_ptrs & 0xf0) | irq_bits[pas_irq];
-		pas_write(int_ptrs, 0xF38A);
-		if (!irq_bits[pas_irq])
-		{
-			printk(KERN_ERR "PAS16: Invalid IRQ %d", pas_irq);
-			hw_config->irq=-1;
-			ok = 0;
-		}
-		else
-		{
-			if (request_irq(pas_irq, pasintr, 0, "PAS16",hw_config) < 0) {
-				printk(KERN_ERR "PAS16: Cannot allocate IRQ %d\n",pas_irq);
-				hw_config->irq=-1;
-				ok = 0;
-			}
-		}
-	}
-
-	if (hw_config->dma < 0 || hw_config->dma > 7)
-	{
-		printk(KERN_ERR "PAS16: Invalid DMA selection %d", hw_config->dma);
-		hw_config->dma=-1;
-		ok = 0;
-	}
-	else
-	{
-		pas_write(dma_bits[hw_config->dma], 0xF389);
-		if (!dma_bits[hw_config->dma])
-		{
-			printk(KERN_ERR "PAS16: Invalid DMA selection %d", hw_config->dma);
-			hw_config->dma=-1;
-			ok = 0;
-		}
-		else
-		{
-			if (sound_alloc_dma(hw_config->dma, "PAS16"))
-			{
-				printk(KERN_ERR "pas2_card.c: Can't allocate DMA channel\n");
-				hw_config->dma=-1;
-				ok = 0;
-			}
-		}
-	}
-
-	/*
-	 * This fixes the timing problems of the PAS due to the Symphony chipset
-	 * as per Media Vision.  Only define this if your PAS doesn't work correctly.
-	 */
-
-	if(symphony)
-	{
-		outb((0x05), 0xa8);
-		outb((0x60), 0xa9);
-	}
-
-	if(broken_bus_clock)
-		pas_write(0x01 | 0x10 | 0x20 | 0x04, 0x8388);
-	else
-		/*
-		 * pas_write(0x01, 0x8388);
-		 */
-		pas_write(0x01 | 0x10 | 0x20, 0x8388);
-
-	pas_write(0x18, 0x838A);	/* ??? */
-	pas_write(0x20 | 0x01, 0x0B8A);		/* Mute off, filter = 17.897 kHz */
-	pas_write(8, 0xBF8A);
-
-	mix_write(0x80 | 5, 0x078B);
-	mix_write(5, 0x078B);
-
-	{
-		struct address_info *sb_config;
-
-		sb_config = &cfg2;
-		if (sb_config->io_base)
-		{
-			unsigned char   irq_dma;
-
-			/*
-			 * Turn on Sound Blaster compatibility
-			 * bit 1 = SB emulation
-			 * bit 0 = MPU401 emulation (CDPC only :-( )
-			 */
-			
-			pas_write(0x02, 0xF788);
-
-			/*
-			 * "Emulation address"
-			 */
-			
-			pas_write((sb_config->io_base >> 4) & 0x0f, 0xF789);
-			pas_sb_base = sb_config->io_base;
-
-			if (!sb_dma_bits[sb_config->dma])
-				printk(KERN_ERR "PAS16 Warning: Invalid SB DMA %d\n\n", sb_config->dma);
-
-			if (!sb_irq_bits[sb_config->irq])
-				printk(KERN_ERR "PAS16 Warning: Invalid SB IRQ %d\n\n", sb_config->irq);
-
-			irq_dma = sb_dma_bits[sb_config->dma] |
-				sb_irq_bits[sb_config->irq];
-
-			pas_write(irq_dma, 0xFB8A);
-		}
-		else
-			pas_write(0x00, 0xF788);
-	}
-
-	if (!ok)
-		printk(KERN_WARNING "PAS16: Driver not enabled\n");
-
-	return ok;
-}
-
-static int __init detect_pas_hw(struct address_info *hw_config)
-{
-	unsigned char   board_id, foo;
-
-	/*
-	 * WARNING: Setting an option like W:1 or so that disables warm boot reset
-	 * of the card will screw up this detect code something fierce. Adding code
-	 * to handle this means possibly interfering with other cards on the bus if
-	 * you have something on base port 0x388. SO be forewarned.
-	 */
-
-	outb((0xBC), 0x9A01);	/* Activate first board */
-	outb((hw_config->io_base >> 2), 0x9A01);	/* Set base address */
-	pas_translate_code = hw_config->io_base - 0x388;
-	pas_write(1, 0xBF88);	/* Select one wait states */
-
-	board_id = pas_read(0x0B8B);
-
-	if (board_id == 0xff)
-		return 0;
-
-	/*
-	 * We probably have a PAS-series board, now check for a PAS16-series board
-	 * by trying to change the board revision bits. PAS16-series hardware won't
-	 * let you do this - the bits are read-only.
-	 */
-
-	foo = board_id ^ 0xe0;
-
-	pas_write(foo, 0x0B8B);
-	foo = pas_read(0x0B8B);
-	pas_write(board_id, 0x0B8B);
-
-	if (board_id != foo)
-		return 0;
-
-	pas_model = pas_read(0xFF88);
-
-	return pas_model;
-}
-
-static void __init attach_pas_card(struct address_info *hw_config)
-{
-	pas_irq = hw_config->irq;
-
-	if (detect_pas_hw(hw_config))
-	{
-
-		if ((pas_model = pas_read(0xFF88)))
-		{
-			char            temp[100];
-
-			if (pas_model < 0 ||
-			    pas_model >= ARRAY_SIZE(pas_model_names)) {
-				printk(KERN_ERR "pas2 unrecognized model.\n");
-				return;
-			}
-			sprintf(temp,
-			    "%s rev %d", pas_model_names[(int) pas_model],
-				    pas_read(0x2789));
-			conf_printf(temp, hw_config);
-		}
-		if (config_pas_hw(hw_config))
-		{
-			pas_pcm_init(hw_config);
-			pas_midi_init();
-			pas_init_mixer();
-		}
-	}
-}
-
-static inline int __init probe_pas(struct address_info *hw_config)
-{
-	return detect_pas_hw(hw_config);
-}
-
-static void __exit unload_pas(struct address_info *hw_config)
-{
-	extern int pas_audiodev;
-	extern int pas2_mididev;
-
-	if (hw_config->dma>0)
-		sound_free_dma(hw_config->dma);
-	if (hw_config->irq>0)
-		free_irq(hw_config->irq, hw_config);
-
-	if(pas_audiodev!=-1)
-		sound_unload_mixerdev(audio_devs[pas_audiodev]->mixer_dev);
-	if(pas2_mididev!=-1)
-	        sound_unload_mididev(pas2_mididev);
-	if(pas_audiodev!=-1)
-		sound_unload_audiodev(pas_audiodev);
-}
-
-static int __initdata io	= -1;
-static int __initdata irq	= -1;
-static int __initdata dma	= -1;
-static int __initdata dma16	= -1;	/* Set this for modules that need it */
-
-static int __initdata sb_io	= 0;
-static int __initdata sb_irq	= -1;
-static int __initdata sb_dma	= -1;
-static int __initdata sb_dma16	= -1;
-
-module_param_hw(io, int, ioport, 0);
-module_param_hw(irq, int, irq, 0);
-module_param_hw(dma, int, dma, 0);
-module_param_hw(dma16, int, dma, 0);
-
-module_param_hw(sb_io, int, ioport, 0);
-module_param_hw(sb_irq, int, irq, 0);
-module_param_hw(sb_dma, int, dma, 0);
-module_param_hw(sb_dma16, int, dma, 0);
-
-module_param(joystick, bool, 0);
-module_param(symphony, bool, 0);
-module_param(broken_bus_clock, bool, 0);
-
-MODULE_LICENSE("GPL");
-
-static int __init init_pas2(void)
-{
-	printk(KERN_INFO "Pro Audio Spectrum driver Copyright (C) by Hannu Savolainen 1993-1996\n");
-
-	cfg.io_base = io;
-	cfg.irq = irq;
-	cfg.dma = dma;
-	cfg.dma2 = dma16;
-
-	cfg2.io_base = sb_io;
-	cfg2.irq = sb_irq;
-	cfg2.dma = sb_dma;
-	cfg2.dma2 = sb_dma16;
-
-	if (cfg.io_base == -1 || cfg.dma == -1 || cfg.irq == -1) {
-		printk(KERN_INFO "I/O, IRQ, DMA and type are mandatory\n");
-		return -EINVAL;
-	}
-
-	if (!probe_pas(&cfg))
-		return -ENODEV;
-	attach_pas_card(&cfg);
-
-	return 0;
-}
-
-static void __exit cleanup_pas2(void)
-{
-	unload_pas(&cfg);
-}
-
-module_init(init_pas2);
-module_exit(cleanup_pas2);
-
-#ifndef MODULE
-static int __init setup_pas2(char *str)
-{
-	/* io, irq, dma, dma2, sb_io, sb_irq, sb_dma, sb_dma2 */
-	int ints[9];
-	
-	str = get_options(str, ARRAY_SIZE(ints), ints);
-
-	io	= ints[1];
-	irq	= ints[2];
-	dma	= ints[3];
-	dma16	= ints[4];
-
-	sb_io	= ints[5];
-	sb_irq	= ints[6];
-	sb_dma	= ints[7];
-	sb_dma16 = ints[8];
-
-	return 1;
-}
-
-__setup("pas2=", setup_pas2);
-#endif