Merge tag 'omap-for-v4.5/dt-pt1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Merge "Device tree changes for omaps for v4.5 merge window" from Tony Lindgren:

- Update all omaps to use pinctrl macros. This makes comparing the pinmux
  settings against the documentation much earlier. Javier compared the
  checksums of the generated dtb files to make sure nothing changed for
  the dtb files.

- Updates for dm816x

- Add GPMC DMA channels for am437x

- Updates for LogicPD Torpedo

- Basic support for CompuLab cm-t335

- Remove tps65217.dtsi file, we're better off adding SoC generic board
  dtsi files for the common features

- Add support for ELM on am33xx

- Add support for Bosch shc c3 board

- Add qspi aliases for am437x and dra7

- Wake-up support for dra7-evm uart1

- Basic support for CompuLab sbc-t43

- Basic support for CompuLab cl-som-am57x

- Use MMC pwrseq for libertas WLAN on igep0020 and igep0030

* tag 'omap-for-v4.5/dt-pt1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (97 commits)
  ARM: dts: omap3-igep0030: Use MMC pwrseq to init SDIO WiFi
  ARM: dts: omap3-igep0020: Use MMC pwrseq to init SDIO WiFi
  ARM: dts: am57xx: cl-som-am57x: skip resetting ETH PHYs
  ARM: dts: am57xx: sbc-am57x: add HDMI support
  ARM: dts: am57xx: compulab-sb-som: add HDMI connector
  ARM: dts: am57xx: sbc-am57x: add LCD support
  ARM: dts: am57xx: sbc-am57x: add GPIO expander support
  ARM: dts: am57xx: sbc-am57x: add EEPROM support
  ARM: dts: am57xx: sbc-am57x: add usb vbus pinmux
  ARM: dts: am57xx: cl-som-am57x: add MMC1 support
  ARM: dts: am57xx: sbc-am57x: add basic board support
  ARM: dts: am57xx: cl-som-am57x: add analog audio support
  ARM: dts: am57xx: cl-som-am57x: add touchscreen support
  ARM: dts: am57xx: cl-som-am57x: add USB support
  ARM: dts: am57xx: cl-som-am57x: add dual EMAC support
  ARM: dts: am57xx: cl-som-am57x: add spi-flash support
  ARM: dts: am57xx: cl-som-am57x: add eMMC support
  ARM: dts: am57xx: cl-som-am57x: add EEPROM support
  ARM: dts: am57xx: cl-som-am57x: add I2C3 support
  ARM: dts: am57xx: cl-som-am57x: dts: add RTC support
  ...

3 files changed, 12 insertions, 2 deletions

diff --git a/include/dt-bindings/pinctrl/am43xx.h b/include/dt-bindings/pinctrl/am43xx.h
index 774dc1e843c5..344bd1eb3386 100644
--- a/include/dt-bindings/pinctrl/am43xx.h
+++ b/include/dt-bindings/pinctrl/am43xx.h
@@ -31,5 +31,11 @@
 #define PIN_INPUT_PULLUP	(INPUT_EN | PULL_UP)
 #define PIN_INPUT_PULLDOWN	(INPUT_EN)
 
+/*
+ * Macro to allow using the absolute physical address instead of the
+ * padconf registers instead of the offset from padconf base.
+ */
+#define AM4372_IOPAD(pa, val)	(((pa) & 0xffff) - 0x0800) (val)
+
 #endif
 
diff --git a/include/dt-bindings/pinctrl/dra.h b/include/dt-bindings/pinctrl/dra.h
index 4379e29f0460..5c75e80915fc 100644
--- a/include/dt-bindings/pinctrl/dra.h
+++ b/include/dt-bindings/pinctrl/dra.h
@@ -67,5 +67,11 @@
 #define PIN_INPUT_PULLUP	(PULL_ENA | INPUT_EN | PULL_UP)
 #define PIN_INPUT_PULLDOWN	(PULL_ENA | INPUT_EN)
 
+/*
+ * Macro to allow using the absolute physical address instead of the
+ * padconf registers instead of the offset from padconf base.
+ */
+#define DRA7XX_CORE_IOPAD(pa, val)	(((pa) & 0xffff) - 0x3400) (val)
+
 #endif
 
diff --git a/include/dt-bindings/pinctrl/omap.h b/include/dt-bindings/pinctrl/omap.h
index 13949259705a..8100de13851c 100644
--- a/include/dt-bindings/pinctrl/omap.h
+++ b/include/dt-bindings/pinctrl/omap.h
@@ -63,8 +63,6 @@
 #define OMAP3_WKUP_IOPAD(pa, val)	OMAP_IOPAD_OFFSET((pa), 0x2a00) (val)
 #define DM816X_IOPAD(pa, val)		OMAP_IOPAD_OFFSET((pa), 0x0800) (val)
 #define AM33XX_IOPAD(pa, val)		OMAP_IOPAD_OFFSET((pa), 0x0800) (val)
-#define AM4372_IOPAD(pa, val)		OMAP_IOPAD_OFFSET((pa), 0x0800) (val)
-#define DRA7XX_CORE_IOPAD(pa, val)	OMAP_IOPAD_OFFSET((pa), 0x3400) (val)
 
 /*
  * Macros to allow using the offset from the padconf physical address