summaryrefslogtreecommitdiffstats
path: root/drivers/usb
diff options
context:
space:
mode:
authorManu Gautam <mgautam@codeaurora.org>2018-01-18 16:54:30 +0530
committerFelipe Balbi <felipe.balbi@linux.intel.com>2018-02-12 10:50:16 +0200
commitc4a5153e87fdf6805f63ff57556260e2554155a5 (patch)
tree5ca6f6f3995b3a864f76a11918e8f0f0a5596fde /drivers/usb
parent00b42170c86f90ac9dea83a7dfcd3f0c38098fe2 (diff)
downloadtalos-op-linux-c4a5153e87fdf6805f63ff57556260e2554155a5.tar.gz
talos-op-linux-c4a5153e87fdf6805f63ff57556260e2554155a5.zip
usb: dwc3: core: Power-off core/PHYs on system_suspend in host mode
Commit 689bf72c6e0d ("usb: dwc3: Don't reinitialize core during host bus-suspend/resume") updated suspend/resume routines to not power_off and reinit PHYs/core for host mode. It broke platforms that rely on DWC3 core to power_off PHYs to enter low power state on system suspend. Perform dwc3_core_exit/init only during host mode system_suspend/ resume to addresses power regression from above mentioned patch and also allow USB session to stay connected across runtime_suspend/resume in host mode. While at it also replace existing checks for HOST only dr_mode with current_dr_role to have similar core driver behavior for both Host-only and DRD+Host configurations. Fixes: 689bf72c6e0d ("usb: dwc3: Don't reinitialize core during host bus-suspend/resume") Reviewed-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Manu Gautam <mgautam@codeaurora.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Diffstat (limited to 'drivers/usb')
-rw-r--r--drivers/usb/dwc3/core.c36
1 files changed, 22 insertions, 14 deletions
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index bc2467f0e6a7..59511f2cd3ac 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -100,6 +100,8 @@ static void dwc3_set_prtcap(struct dwc3 *dwc, u32 mode)
reg &= ~(DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_OTG));
reg |= DWC3_GCTL_PRTCAPDIR(mode);
dwc3_writel(dwc->regs, DWC3_GCTL, reg);
+
+ dwc->current_dr_role = mode;
}
static void __dwc3_set_mode(struct work_struct *work)
@@ -133,8 +135,6 @@ static void __dwc3_set_mode(struct work_struct *work)
dwc3_set_prtcap(dwc, dwc->desired_dr_role);
- dwc->current_dr_role = dwc->desired_dr_role;
-
spin_unlock_irqrestore(&dwc->lock, flags);
switch (dwc->desired_dr_role) {
@@ -219,7 +219,7 @@ static int dwc3_core_soft_reset(struct dwc3 *dwc)
* XHCI driver will reset the host block. If dwc3 was configured for
* host-only mode, then we can return early.
*/
- if (dwc->dr_mode == USB_DR_MODE_HOST)
+ if (dwc->current_dr_role == DWC3_GCTL_PRTCAP_HOST)
return 0;
reg = dwc3_readl(dwc->regs, DWC3_DCTL);
@@ -919,7 +919,6 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
switch (dwc->dr_mode) {
case USB_DR_MODE_PERIPHERAL:
- dwc->current_dr_role = DWC3_GCTL_PRTCAP_DEVICE;
dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_DEVICE);
if (dwc->usb2_phy)
@@ -935,7 +934,6 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
}
break;
case USB_DR_MODE_HOST:
- dwc->current_dr_role = DWC3_GCTL_PRTCAP_HOST;
dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_HOST);
if (dwc->usb2_phy)
@@ -1287,7 +1285,7 @@ static int dwc3_remove(struct platform_device *pdev)
}
#ifdef CONFIG_PM
-static int dwc3_suspend_common(struct dwc3 *dwc)
+static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)
{
unsigned long flags;
@@ -1299,6 +1297,10 @@ static int dwc3_suspend_common(struct dwc3 *dwc)
dwc3_core_exit(dwc);
break;
case DWC3_GCTL_PRTCAP_HOST:
+ /* do nothing during host runtime_suspend */
+ if (!PMSG_IS_AUTO(msg))
+ dwc3_core_exit(dwc);
+ break;
default:
/* do nothing */
break;
@@ -1307,7 +1309,7 @@ static int dwc3_suspend_common(struct dwc3 *dwc)
return 0;
}
-static int dwc3_resume_common(struct dwc3 *dwc)
+static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg)
{
unsigned long flags;
int ret;
@@ -1323,6 +1325,13 @@ static int dwc3_resume_common(struct dwc3 *dwc)
spin_unlock_irqrestore(&dwc->lock, flags);
break;
case DWC3_GCTL_PRTCAP_HOST:
+ /* nothing to do on host runtime_resume */
+ if (!PMSG_IS_AUTO(msg)) {
+ ret = dwc3_core_init(dwc);
+ if (ret)
+ return ret;
+ }
+ break;
default:
/* do nothing */
break;
@@ -1334,12 +1343,11 @@ static int dwc3_resume_common(struct dwc3 *dwc)
static int dwc3_runtime_checks(struct dwc3 *dwc)
{
switch (dwc->current_dr_role) {
- case USB_DR_MODE_PERIPHERAL:
- case USB_DR_MODE_OTG:
+ case DWC3_GCTL_PRTCAP_DEVICE:
if (dwc->connected)
return -EBUSY;
break;
- case USB_DR_MODE_HOST:
+ case DWC3_GCTL_PRTCAP_HOST:
default:
/* do nothing */
break;
@@ -1356,7 +1364,7 @@ static int dwc3_runtime_suspend(struct device *dev)
if (dwc3_runtime_checks(dwc))
return -EBUSY;
- ret = dwc3_suspend_common(dwc);
+ ret = dwc3_suspend_common(dwc, PMSG_AUTO_SUSPEND);
if (ret)
return ret;
@@ -1372,7 +1380,7 @@ static int dwc3_runtime_resume(struct device *dev)
device_init_wakeup(dev, false);
- ret = dwc3_resume_common(dwc);
+ ret = dwc3_resume_common(dwc, PMSG_AUTO_RESUME);
if (ret)
return ret;
@@ -1419,7 +1427,7 @@ static int dwc3_suspend(struct device *dev)
struct dwc3 *dwc = dev_get_drvdata(dev);
int ret;
- ret = dwc3_suspend_common(dwc);
+ ret = dwc3_suspend_common(dwc, PMSG_SUSPEND);
if (ret)
return ret;
@@ -1435,7 +1443,7 @@ static int dwc3_resume(struct device *dev)
pinctrl_pm_select_default_state(dev);
- ret = dwc3_resume_common(dwc);
+ ret = dwc3_resume_common(dwc, PMSG_RESUME);
if (ret)
return ret;
OpenPOWER on IntegriCloud