Merge tag 'usb-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB patches from Greg Kroah-Hartman:
 "Here's the big USB merge for 3.9-rc1

  Nothing major, lots of gadget fixes, and of course, xhci stuff.

  All of this has been in linux-next for a while, with the exception of
  the last 3 patches, which were reverts of patches in the tree that
  caused problems, they went in yesterday."

* tag 'usb-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (190 commits)
  Revert "USB: EHCI: make ehci-vt8500 a separate driver"
  Revert "USB: EHCI: make ehci-orion a separate driver"
  Revert "USB: update host controller Kconfig entries"
  USB: update host controller Kconfig entries
  USB: EHCI: make ehci-orion a separate driver
  USB: EHCI: make ehci-vt8500 a separate driver
  USB: usb-storage: unusual_devs update for Super TOP SATA bridge
  USB: ehci-omap: Fix autoloading of module
  USB: ehci-omap: Don't free gpios that we didn't request
  USB: option: add Huawei "ACM" devices using protocol = vendor
  USB: serial: fix null-pointer dereferences on disconnect
  USB: option: add Yota / Megafon M100-1 4g modem
  drivers/usb: add missing GENERIC_HARDIRQS dependencies
  USB: storage: properly handle the endian issues of idProduct
  testusb: remove all mentions of 'usbfs'
  usb: gadget: imx_udc: make it depend on BROKEN
  usb: omap_control_usb: fix compile warning
  ARM: OMAP: USB: Add phy binding information
  ARM: OMAP2: MUSB: Specify omap4 has mailbox
  ARM: OMAP: devices: create device for usb part of control module
  ...

1 files changed, 36 insertions, 53 deletions

diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index acd5f9d71d03..1762354fe793 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -37,6 +37,7 @@
 #include <linux/err.h>
 #include <linux/delay.h>
 #include <linux/usb/musb-omap.h>
+#include <linux/usb/omap_control_usb.h>
 
 #include "musb_core.h"
 #include "omap2430.h"
@@ -46,7 +47,7 @@ struct omap2430_glue {
 	struct platform_device	*musb;
 	enum omap_musb_vbus_id_status status;
 	struct work_struct	omap_musb_mailbox_work;
-	u32 __iomem		*control_otghs;
+	struct device		*control_otghs;
 };
 #define glue_to_musb(g)		platform_get_drvdata(g->musb)
 
@@ -54,26 +55,6 @@ struct omap2430_glue		*_glue;
 
 static struct timer_list musb_idle_timer;
 
-/**
- * omap4_usb_phy_mailbox - write to usb otg mailbox
- * @glue: struct omap2430_glue *
- * @val: the value to be written to the mailbox
- *
- * On detection of a device (ID pin is grounded), this API should be called
- * to set AVALID, VBUSVALID and ID pin is grounded.
- *
- * When OMAP is connected to a host (OMAP in device mode), this API
- * is called to set AVALID, VBUSVALID and ID pin in high impedance.
- *
- * XXX: This function will be removed once we have a seperate driver for
- * control module
- */
-static void omap4_usb_phy_mailbox(struct omap2430_glue *glue, u32 val)
-{
-	if (glue->control_otghs)
-		writel(val, glue->control_otghs);
-}
-
 static void musb_do_idle(unsigned long _musb)
 {
 	struct musb	*musb = (void *)_musb;
@@ -255,11 +236,11 @@ static inline void omap2430_low_level_init(struct musb *musb)
 void omap_musb_mailbox(enum omap_musb_vbus_id_status status)
 {
 	struct omap2430_glue	*glue = _glue;
-	struct musb		*musb = glue_to_musb(glue);
 
-	glue->status = status;
-	if (!musb) {
-		dev_err(glue->dev, "musb core is not yet ready\n");
+	if (glue && glue_to_musb(glue)) {
+		glue->status = status;
+	} else {
+		pr_err("%s: musb core is not yet ready\n", __func__);
 		return;
 	}
 
@@ -269,7 +250,6 @@ EXPORT_SYMBOL_GPL(omap_musb_mailbox);
 
 static void omap_musb_set_mailbox(struct omap2430_glue *glue)
 {
-	u32 val;
 	struct musb *musb = glue_to_musb(glue);
 	struct device *dev = musb->controller;
 	struct musb_hdrc_platform_data *pdata = dev->platform_data;
@@ -285,8 +265,8 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue)
 		musb->xceiv->last_event = USB_EVENT_ID;
 		if (musb->gadget_driver) {
 			pm_runtime_get_sync(dev);
-			val = AVALID | VBUSVALID;
-			omap4_usb_phy_mailbox(glue, val);
+			omap_control_usb_set_mode(glue->control_otghs,
+				USB_MODE_HOST);
 			omap2430_musb_set_vbus(musb, 1);
 		}
 		break;
@@ -299,8 +279,7 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue)
 		musb->xceiv->last_event = USB_EVENT_VBUS;
 		if (musb->gadget_driver)
 			pm_runtime_get_sync(dev);
-		val = IDDIG | AVALID | VBUSVALID;
-		omap4_usb_phy_mailbox(glue, val);
+		omap_control_usb_set_mode(glue->control_otghs, USB_MODE_DEVICE);
 		break;
 
 	case OMAP_MUSB_ID_FLOAT:
@@ -317,8 +296,8 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue)
 			if (musb->xceiv->otg->set_vbus)
 				otg_set_vbus(musb->xceiv->otg, 0);
 		}
-		val = SESSEND | IDDIG;
-		omap4_usb_phy_mailbox(glue, val);
+		omap_control_usb_set_mode(glue->control_otghs,
+			USB_MODE_DISCONNECT);
 		break;
 	default:
 		dev_dbg(dev, "ID float\n");
@@ -366,10 +345,15 @@ static int omap2430_musb_init(struct musb *musb)
 	 * up through ULPI.  TWL4030-family PMICs include one,
 	 * which needs a driver, drivers aren't always needed.
 	 */
-	musb->xceiv = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
+	if (dev->parent->of_node)
+		musb->xceiv = devm_usb_get_phy_by_phandle(dev->parent,
+		    "usb-phy", 0);
+	else
+		musb->xceiv = devm_usb_get_phy_dev(dev, 0);
+
 	if (IS_ERR_OR_NULL(musb->xceiv)) {
 		pr_err("HS USB OTG: no transceiver configured\n");
-		return -ENODEV;
+		return -EPROBE_DEFER;
 	}
 
 	musb->isr = omap2430_musb_interrupt;
@@ -415,7 +399,6 @@ err1:
 static void omap2430_musb_enable(struct musb *musb)
 {
 	u8		devctl;
-	u32		val;
 	unsigned long timeout = jiffies + msecs_to_jiffies(1000);
 	struct device *dev = musb->controller;
 	struct omap2430_glue *glue = dev_get_drvdata(dev->parent);
@@ -425,8 +408,7 @@ static void omap2430_musb_enable(struct musb *musb)
 	switch (glue->status) {
 
 	case OMAP_MUSB_ID_GROUND:
-		val = AVALID | VBUSVALID;
-		omap4_usb_phy_mailbox(glue, val);
+		omap_control_usb_set_mode(glue->control_otghs, USB_MODE_HOST);
 		if (data->interface_type != MUSB_INTERFACE_UTMI)
 			break;
 		devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
@@ -445,8 +427,7 @@ static void omap2430_musb_enable(struct musb *musb)
 		break;
 
 	case OMAP_MUSB_VBUS_VALID:
-		val = IDDIG | AVALID | VBUSVALID;
-		omap4_usb_phy_mailbox(glue, val);
+		omap_control_usb_set_mode(glue->control_otghs, USB_MODE_DEVICE);
 		break;
 
 	default:
@@ -456,14 +437,12 @@ static void omap2430_musb_enable(struct musb *musb)
 
 static void omap2430_musb_disable(struct musb *musb)
 {
-	u32 val;
 	struct device *dev = musb->controller;
 	struct omap2430_glue *glue = dev_get_drvdata(dev->parent);
 
-	if (glue->status != OMAP_MUSB_UNKNOWN) {
-		val = SESSEND | IDDIG;
-		omap4_usb_phy_mailbox(glue, val);
-	}
+	if (glue->status != OMAP_MUSB_UNKNOWN)
+		omap_control_usb_set_mode(glue->control_otghs,
+			USB_MODE_DISCONNECT);
 }
 
 static int omap2430_musb_exit(struct musb *musb)
@@ -498,7 +477,6 @@ static int omap2430_probe(struct platform_device *pdev)
 	struct omap2430_glue		*glue;
 	struct device_node		*np = pdev->dev.of_node;
 	struct musb_hdrc_config		*config;
-	struct resource			*res;
 	int				ret = -ENOMEM;
 
 	glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL);
@@ -521,29 +499,23 @@ static int omap2430_probe(struct platform_device *pdev)
 	glue->musb			= musb;
 	glue->status			= OMAP_MUSB_UNKNOWN;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-
-	glue->control_otghs = devm_ioremap_resource(&pdev->dev, res);
-
 	if (np) {
 		pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
 		if (!pdata) {
 			dev_err(&pdev->dev,
 				"failed to allocate musb platfrom data\n");
-			ret = -ENOMEM;
 			goto err2;
 		}
 
 		data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
 		if (!data) {
 			dev_err(&pdev->dev,
-					"failed to allocate musb board data\n");
-			ret = -ENOMEM;
+				"failed to allocate musb board data\n");
 			goto err2;
 		}
 
 		config = devm_kzalloc(&pdev->dev, sizeof(*config), GFP_KERNEL);
-		if (!data) {
+		if (!config) {
 			dev_err(&pdev->dev,
 				"failed to allocate musb hdrc config\n");
 			goto err2;
@@ -556,11 +528,22 @@ static int omap2430_probe(struct platform_device *pdev)
 		of_property_read_u32(np, "ram_bits", (u32 *)&config->ram_bits);
 		of_property_read_u32(np, "power", (u32 *)&pdata->power);
 		config->multipoint = of_property_read_bool(np, "multipoint");
+		pdata->has_mailbox = of_property_read_bool(np,
+		    "ti,has-mailbox");
 
 		pdata->board_data	= data;
 		pdata->config		= config;
 	}
 
+	if (pdata->has_mailbox) {
+		glue->control_otghs = omap_get_control_dev();
+		if (IS_ERR(glue->control_otghs)) {
+			dev_vdbg(&pdev->dev, "Failed to get control device\n");
+			return -ENODEV;
+		}
+	} else {
+		glue->control_otghs = ERR_PTR(-ENODEV);
+	}
 	pdata->platform_ops		= &omap2430_ops;
 
 	platform_set_drvdata(pdev, glue);