Merge tag 'for-v4.6-rc/omap-fixes-a' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into omap-for-v4.6/fixes

ARM: OMAP2+: first hwmod fix for v4.6-rc

Fix a longstanding bug in the hwmod code that could cause
hardware SYSCONFIG register values to not match the kernel's
idea of what they should be, and that could result in lower
performance during IP block idle entry.

Basic build, boot, and PM test logs are available here:

http://www.pwsan.com/omap/testlogs/omap-hwmod-fixes-a-for-v4.6-rc/20160326231727/

1 files changed, 110 insertions, 24 deletions

diff --git a/drivers/usb/dwc2/hcd.h b/drivers/usb/dwc2/hcd.h
index 8f0a29cefdf7..89fa26cb25f4 100644
--- a/drivers/usb/dwc2/hcd.h
+++ b/drivers/usb/dwc2/hcd.h
@@ -75,8 +75,6 @@ struct dwc2_qh;
  *                      (micro)frame
  * @xfer_buf:           Pointer to current transfer buffer position
  * @xfer_dma:           DMA address of xfer_buf
- * @align_buf:          In Buffer DMA mode this will be used if xfer_buf is not
- *                      DWORD aligned
  * @xfer_len:           Total number of bytes to transfer
  * @xfer_count:         Number of bytes transferred so far
  * @start_pkt_count:    Packet count at start of transfer
@@ -108,6 +106,7 @@ struct dwc2_qh;
  * @hc_list_entry:      For linking to list of host channels
  * @desc_list_addr:     Current QH's descriptor list DMA address
  * @desc_list_sz:       Current QH's descriptor list size
+ * @split_order_list_entry: List entry for keeping track of the order of splits
  *
  * This structure represents the state of a single host channel when acting in
  * host mode. It contains the data items needed to transfer packets to an
@@ -133,7 +132,6 @@ struct dwc2_host_chan {
 
 	u8 *xfer_buf;
 	dma_addr_t xfer_dma;
-	dma_addr_t align_buf;
 	u32 xfer_len;
 	u32 xfer_count;
 	u16 start_pkt_count;
@@ -161,6 +159,7 @@ struct dwc2_host_chan {
 	struct list_head hc_list_entry;
 	dma_addr_t desc_list_addr;
 	u32 desc_list_sz;
+	struct list_head split_order_list_entry;
 };
 
 struct dwc2_hcd_pipe_info {
@@ -213,9 +212,47 @@ enum dwc2_transaction_type {
 	DWC2_TRANSACTION_ALL,
 };
 
+/* The number of elements per LS bitmap (per port on multi_tt) */
+#define DWC2_ELEMENTS_PER_LS_BITMAP	DIV_ROUND_UP(DWC2_LS_SCHEDULE_SLICES, \
+						     BITS_PER_LONG)
+
+/**
+ * struct dwc2_tt - dwc2 data associated with a usb_tt
+ *
+ * @refcount:           Number of Queue Heads (QHs) holding a reference.
+ * @usb_tt:             Pointer back to the official usb_tt.
+ * @periodic_bitmaps:   Bitmap for which parts of the 1ms frame are accounted
+ *                      for already.  Each is DWC2_ELEMENTS_PER_LS_BITMAP
+ *			elements (so sizeof(long) times that in bytes).
+ *
+ * This structure is stored in the hcpriv of the official usb_tt.
+ */
+struct dwc2_tt {
+	int refcount;
+	struct usb_tt *usb_tt;
+	unsigned long periodic_bitmaps[];
+};
+
+/**
+ * struct dwc2_hs_transfer_time - Info about a transfer on the high speed bus.
+ *
+ * @start_schedule_usecs:  The start time on the main bus schedule.  Note that
+ *                         the main bus schedule is tightly packed and this
+ *			   time should be interpreted as tightly packed (so
+ *			   uFrame 0 starts at 0 us, uFrame 1 starts at 100 us
+ *			   instead of 125 us).
+ * @duration_us:           How long this transfer goes.
+ */
+
+struct dwc2_hs_transfer_time {
+	u32 start_schedule_us;
+	u16 duration_us;
+};
+
 /**
  * struct dwc2_qh - Software queue head structure
  *
+ * @hsotg:              The HCD state structure for the DWC OTG controller
  * @ep_type:            Endpoint type. One of the following values:
  *                       - USB_ENDPOINT_XFER_CONTROL
  *                       - USB_ENDPOINT_XFER_BULK
@@ -236,17 +273,35 @@ enum dwc2_transaction_type {
  * @do_split:           Full/low speed endpoint on high-speed hub requires split
  * @td_first:           Index of first activated isochronous transfer descriptor
  * @td_last:            Index of last activated isochronous transfer descriptor
- * @usecs:              Bandwidth in microseconds per (micro)frame
- * @interval:           Interval between transfers in (micro)frames
- * @sched_frame:        (Micro)frame to initialize a periodic transfer.
- *                      The transfer executes in the following (micro)frame.
- * @frame_usecs:        Internal variable used by the microframe scheduler
- * @start_split_frame:  (Micro)frame at which last start split was initialized
+ * @host_us:            Bandwidth in microseconds per transfer as seen by host
+ * @device_us:          Bandwidth in microseconds per transfer as seen by device
+ * @host_interval:      Interval between transfers as seen by the host.  If
+ *                      the host is high speed and the device is low speed this
+ *                      will be 8 times device interval.
+ * @device_interval:    Interval between transfers as seen by the device.
+ *                      interval.
+ * @next_active_frame:  (Micro)frame _before_ we next need to put something on
+ *                      the bus.  We'll move the qh to active here.  If the
+ *                      host is in high speed mode this will be a uframe.  If
+ *                      the host is in low speed mode this will be a full frame.
+ * @start_active_frame: If we are partway through a split transfer, this will be
+ *			what next_active_frame was when we started.  Otherwise
+ *			it should always be the same as next_active_frame.
+ * @num_hs_transfers:   Number of transfers in hs_transfers.
+ *                      Normally this is 1 but can be more than one for splits.
+ *                      Always >= 1 unless the host is in low/full speed mode.
+ * @hs_transfers:       Transfers that are scheduled as seen by the high speed
+ *                      bus.  Not used if host is in low or full speed mode (but
+ *                      note that it IS USED if the device is low or full speed
+ *                      as long as the HOST is in high speed mode).
+ * @ls_start_schedule_slice: Start time (in slices) on the low speed bus
+ *                           schedule that's being used by this device.  This
+ *			     will be on the periodic_bitmap in a
+ *                           "struct dwc2_tt".  Not used if this device is high
+ *                           speed.  Note that this is in "schedule slice" which
+ *                           is tightly packed.
+ * @ls_duration_us:     Duration on the low speed bus schedule.
  * @ntd:                Actual number of transfer descriptors in a list
- * @dw_align_buf:       Used instead of original buffer if its physical address
- *                      is not dword-aligned
- * @dw_align_buf_size:  Size of dw_align_buf
- * @dw_align_buf_dma:   DMA address for dw_align_buf
  * @qtd_list:           List of QTDs for this QH
  * @channel:            Host channel currently processing transfers for this QH
  * @qh_list_entry:      Entry for QH in either the periodic or non-periodic
@@ -257,13 +312,20 @@ enum dwc2_transaction_type {
  * @n_bytes:            Xfer Bytes array. Each element corresponds to a transfer
  *                      descriptor and indicates original XferSize value for the
  *                      descriptor
+ * @unreserve_timer:    Timer for releasing periodic reservation.
+ * @dwc2_tt:            Pointer to our tt info (or NULL if no tt).
+ * @ttport:             Port number within our tt.
  * @tt_buffer_dirty     True if clear_tt_buffer_complete is pending
+ * @unreserve_pending:  True if we planned to unreserve but haven't yet.
+ * @schedule_low_speed: True if we have a low/full speed component (either the
+ *			host is in low/full speed mode or do_split).
  *
  * A Queue Head (QH) holds the static characteristics of an endpoint and
  * maintains a list of transfers (QTDs) for that endpoint. A QH structure may
  * be entered in either the non-periodic or periodic schedule.
  */
 struct dwc2_qh {
+	struct dwc2_hsotg *hsotg;
 	u8 ep_type;
 	u8 ep_is_in;
 	u16 maxp;
@@ -273,15 +335,16 @@ struct dwc2_qh {
 	u8 do_split;
 	u8 td_first;
 	u8 td_last;
-	u16 usecs;
-	u16 interval;
-	u16 sched_frame;
-	u16 frame_usecs[8];
-	u16 start_split_frame;
+	u16 host_us;
+	u16 device_us;
+	u16 host_interval;
+	u16 device_interval;
+	u16 next_active_frame;
+	u16 start_active_frame;
+	s16 num_hs_transfers;
+	struct dwc2_hs_transfer_time hs_transfers[DWC2_HS_SCHEDULE_UFRAMES];
+	u32 ls_start_schedule_slice;
 	u16 ntd;
-	u8 *dw_align_buf;
-	int dw_align_buf_size;
-	dma_addr_t dw_align_buf_dma;
 	struct list_head qtd_list;
 	struct dwc2_host_chan *channel;
 	struct list_head qh_list_entry;
@@ -289,7 +352,12 @@ struct dwc2_qh {
 	dma_addr_t desc_list_dma;
 	u32 desc_list_sz;
 	u32 *n_bytes;
+	struct timer_list unreserve_timer;
+	struct dwc2_tt *dwc_tt;
+	int ttport;
 	unsigned tt_buffer_dirty:1;
+	unsigned unreserve_pending:1;
+	unsigned schedule_low_speed:1;
 };
 
 /**
@@ -362,6 +430,8 @@ struct hc_xfer_info {
 };
 #endif
 
+u32 dwc2_calc_frame_interval(struct dwc2_hsotg *hsotg);
+
 /* Gets the struct usb_hcd that contains a struct dwc2_hsotg */
 static inline struct usb_hcd *dwc2_hsotg_to_hcd(struct dwc2_hsotg *hsotg)
 {
@@ -383,6 +453,12 @@ static inline void disable_hc_int(struct dwc2_hsotg *hsotg, int chnum, u32 intr)
 	dwc2_writel(mask, hsotg->regs + HCINTMSK(chnum));
 }
 
+void dwc2_hc_cleanup(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan);
+void dwc2_hc_halt(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan,
+		  enum dwc2_halt_status halt_status);
+void dwc2_hc_start_transfer_ddma(struct dwc2_hsotg *hsotg,
+				 struct dwc2_host_chan *chan);
+
 /*
  * Reads HPRT0 in preparation to modify. It keeps the WC bits 0 so that if they
  * are read as 1, they won't clear when written back.
@@ -456,7 +532,6 @@ extern void dwc2_hcd_queue_transactions(struct dwc2_hsotg *hsotg,
 
 /* Schedule Queue Functions */
 /* Implemented in hcd_queue.c */
-extern void dwc2_hcd_init_usecs(struct dwc2_hsotg *hsotg);
 extern struct dwc2_qh *dwc2_hcd_qh_create(struct dwc2_hsotg *hsotg,
 					  struct dwc2_hcd_urb *urb,
 					  gfp_t mem_flags);
@@ -571,6 +646,11 @@ static inline u16 dwc2_frame_num_inc(u16 frame, u16 inc)
 	return (frame + inc) & HFNUM_MAX_FRNUM;
 }
 
+static inline u16 dwc2_frame_num_dec(u16 frame, u16 dec)
+{
+	return (frame + HFNUM_MAX_FRNUM + 1 - dec) & HFNUM_MAX_FRNUM;
+}
+
 static inline u16 dwc2_full_frame_num(u16 frame)
 {
 	return (frame & HFNUM_MAX_FRNUM) >> 3;
@@ -648,7 +728,7 @@ static inline u16 dwc2_hcd_get_ep_bandwidth(struct dwc2_hsotg *hsotg,
 		return 0;
 	}
 
-	return qh->usecs;
+	return qh->host_us;
 }
 
 extern void dwc2_hcd_save_data_toggle(struct dwc2_hsotg *hsotg,
@@ -717,6 +797,12 @@ extern void dwc2_host_start(struct dwc2_hsotg *hsotg);
 extern void dwc2_host_disconnect(struct dwc2_hsotg *hsotg);
 extern void dwc2_host_hub_info(struct dwc2_hsotg *hsotg, void *context,
 			       int *hub_addr, int *hub_port);
+extern struct dwc2_tt *dwc2_host_get_tt_info(struct dwc2_hsotg *hsotg,
+					     void *context, gfp_t mem_flags,
+					     int *ttport);
+
+extern void dwc2_host_put_tt_info(struct dwc2_hsotg *hsotg,
+				  struct dwc2_tt *dwc_tt);
 extern int dwc2_host_get_speed(struct dwc2_hsotg *hsotg, void *context);
 extern void dwc2_host_complete(struct dwc2_hsotg *hsotg, struct dwc2_qtd *qtd,
 			       int status);
@@ -739,7 +825,7 @@ do {									\
 	_qtd_ = list_entry((_qh_)->qtd_list.next, struct dwc2_qtd,	\
 			   qtd_list_entry);				\
 	if (usb_pipeint(_qtd_->urb->pipe) &&				\
-	    (_qh_)->start_split_frame != 0 && !_qtd_->complete_split) {	\
+	    (_qh_)->start_active_frame != 0 && !_qtd_->complete_split) { \
 		_hfnum_.d32 = dwc2_readl((_hcd_)->regs + HFNUM);	\
 		switch (_hfnum_.b.frnum & 0x7) {			\
 		case 7:							\