USB: use the runtime-PM autosuspend implementation

This patch (as1428) converts USB over to the new runtime-PM core
autosuspend framework.  One slightly awkward aspect of the conversion
is that USB devices will now have two suspend-delay attributes: the
old power/autosuspend file and the new power/autosuspend_delay_ms
file.  One expresses the delay time in seconds and the other in
milliseconds, but otherwise they do the same thing.  The old attribute
can be deprecated and then removed eventually.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 5 insertions, 72 deletions

diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index 0a63e968c683..43c25c29ac1f 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -1397,32 +1397,7 @@ void usb_autosuspend_device(struct usb_device *udev)
 	int	status;
 
 	usb_mark_last_busy(udev);
-	status = pm_runtime_put_sync(&udev->dev);
-	dev_vdbg(&udev->dev, "%s: cnt %d -> %d\n",
-			__func__, atomic_read(&udev->dev.power.usage_count),
-			status);
-}
-
-/**
- * usb_try_autosuspend_device - attempt an autosuspend of a USB device and its interfaces
- * @udev: the usb_device to autosuspend
- *
- * This routine should be called when a core subsystem thinks @udev may
- * be ready to autosuspend.
- *
- * @udev's usage counter left unchanged.  If it is 0 and all the interfaces
- * are inactive then an autosuspend will be attempted.  The attempt may
- * fail or be delayed.
- *
- * The caller must hold @udev's device lock.
- *
- * This routine can run only in process context.
- */
-void usb_try_autosuspend_device(struct usb_device *udev)
-{
-	int	status;
-
-	status = pm_runtime_idle(&udev->dev);
+	status = pm_runtime_put_sync_autosuspend(&udev->dev);
 	dev_vdbg(&udev->dev, "%s: cnt %d -> %d\n",
 			__func__, atomic_read(&udev->dev.power.usage_count),
 			status);
@@ -1508,32 +1483,11 @@ EXPORT_SYMBOL_GPL(usb_autopm_put_interface);
 void usb_autopm_put_interface_async(struct usb_interface *intf)
 {
 	struct usb_device	*udev = interface_to_usbdev(intf);
-	unsigned long		last_busy;
-	int			status = 0;
+	int			status;
 
-	last_busy = udev->dev.power.last_busy;
 	usb_mark_last_busy(udev);
 	atomic_dec(&intf->pm_usage_cnt);
-	pm_runtime_put_noidle(&intf->dev);
-
-	if (udev->dev.power.runtime_auto) {
-		/* Optimization: Don't schedule a delayed autosuspend if
-		 * the timer is already running and the expiration time
-		 * wouldn't change.
-		 *
-		 * We have to use the interface's timer.  Attempts to
-		 * schedule a suspend for the device would fail because
-		 * the interface is still active.
-		 */
-		if (intf->dev.power.timer_expires == 0 ||
-				round_jiffies_up(last_busy) !=
-				round_jiffies_up(jiffies)) {
-			status = pm_schedule_suspend(&intf->dev,
-					jiffies_to_msecs(
-					round_jiffies_up_relative(
-						udev->autosuspend_delay)));
-		}
-	}
+	status = pm_runtime_put(&intf->dev);
 	dev_vdbg(&intf->dev, "%s: cnt %d -> %d\n",
 			__func__, atomic_read(&intf->dev.power.usage_count),
 			status);
@@ -1651,7 +1605,6 @@ static int autosuspend_check(struct usb_device *udev)
 {
 	int			w, i;
 	struct usb_interface	*intf;
-	unsigned long		suspend_time, j;
 
 	/* Fail if autosuspend is disabled, or any interfaces are in use, or
 	 * any interface drivers require remote wakeup but it isn't available.
@@ -1691,17 +1644,6 @@ static int autosuspend_check(struct usb_device *udev)
 		return -EOPNOTSUPP;
 	}
 	udev->do_remote_wakeup = w;
-
-	/* If everything is okay but the device hasn't been idle for long
-	 * enough, queue a delayed autosuspend request.
-	 */
-	j = ACCESS_ONCE(jiffies);
-	suspend_time = udev->dev.power.last_busy + udev->autosuspend_delay;
-	if (time_before(j, suspend_time)) {
-		pm_schedule_suspend(&udev->dev, jiffies_to_msecs(
-				round_jiffies_up_relative(suspend_time - j)));
-		return -EAGAIN;
-	}
 	return 0;
 }
 
@@ -1719,17 +1661,8 @@ static int usb_runtime_suspend(struct device *dev)
 
 	status = usb_suspend_both(udev, PMSG_AUTO_SUSPEND);
 
-	/* If an interface fails the suspend, adjust the last_busy
-	 * time so that we don't get another suspend attempt right
-	 * away.
-	 */
-	if (status) {
-		udev->dev.power.last_busy = jiffies +
-				(udev->autosuspend_delay == 0 ? HZ/2 : 0);
-	}
-
 	/* Prevent the parent from suspending immediately after */
-	else if (udev->parent)
+	if (status == 0 && udev->parent)
 		usb_mark_last_busy(udev->parent);
 
 	return status;
@@ -1756,7 +1689,7 @@ static int usb_runtime_idle(struct device *dev)
 	 * autosuspend checks.
 	 */
 	if (autosuspend_check(udev) == 0)
-		pm_runtime_suspend(dev);
+		pm_runtime_autosuspend(dev);
 	return 0;
 }