Staging: rtl8187se: cleanup r8180_rtl8225z2.c

* make read_rtl8225() static
* make tables static const
* remove commented out code
* remove useless comments
* beautify code

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 279 insertions, 615 deletions

diff --git a/drivers/staging/rtl8187se/r8180_rtl8225z2.c b/drivers/staging/rtl8187se/r8180_rtl8225z2.c
index b09c8d14bf00..b648751cdaa3 100644
--- a/drivers/staging/rtl8187se/r8180_rtl8225z2.c
+++ b/drivers/staging/rtl8187se/r8180_rtl8225z2.c
@@ -236,34 +236,31 @@ static void rtl8225_SetTXPowerLevel(struct net_device *dev, short ch)
 	mdelay(1);
 }
 
-//2005.11.16
-u8 rtl8225z2_threshold[]={
+static const u8 rtl8225z2_threshold[] = {
         0x8d, 0x8d, 0x8d, 0x8d, 0x9d, 0xad, 0xbd,
 };
 
-//      0xd 0x19 0x1b 0x21
-u8 rtl8225z2_gain_bg[]={
-	0x23, 0x15, 0xa5, // -82-1dbm
-        0x23, 0x15, 0xb5, // -82-2dbm
-        0x23, 0x15, 0xc5, // -82-3dbm
-        0x33, 0x15, 0xc5, // -78dbm
-        0x43, 0x15, 0xc5, // -74dbm
-        0x53, 0x15, 0xc5, // -70dbm
-        0x63, 0x15, 0xc5, // -66dbm
+static const u8 rtl8225z2_gain_bg[] = {
+	0x23, 0x15, 0xa5, /* -82-1dBm */
+	0x23, 0x15, 0xb5, /* -82-2dBm */
+	0x23, 0x15, 0xc5, /* -82-3dBm */
+	0x33, 0x15, 0xc5, /* -78dBm */
+	0x43, 0x15, 0xc5, /* -74dBm */
+	0x53, 0x15, 0xc5, /* -70dBm */
+	0x63, 0x15, 0xc5, /* -66dBm */
 };
 
-u8 rtl8225z2_gain_a[]={
-	0x13,0x27,0x5a,//,0x37,// -82dbm
-	0x23,0x23,0x58,//,0x37,// -82dbm
-	0x33,0x1f,0x56,//,0x37,// -82dbm
-	0x43,0x1b,0x54,//,0x37,// -78dbm
-	0x53,0x17,0x51,//,0x37,// -74dbm
-	0x63,0x24,0x4f,//,0x37,// -70dbm
-	0x73,0x0f,0x4c,//,0x37,// -66dbm
+static const u8 rtl8225z2_gain_a[] = {
+	0x13, 0x27, 0x5a, /* -82dBm */
+	0x23, 0x23, 0x58, /* -82dBm */
+	0x33, 0x1f, 0x56, /* -82dBm */
+	0x43, 0x1b, 0x54, /* -78dBm */
+	0x53, 0x17, 0x51, /* -74dBm */
+	0x63, 0x24, 0x4f, /* -70dBm */
+	0x73, 0x0f, 0x4c, /* -66dBm */
 };
 
-//-
-u16 rtl8225z2_rxgain[]={
+static const u16 rtl8225z2_rxgain[] = {
 	0x0400, 0x0401, 0x0402, 0x0403, 0x0404, 0x0405, 0x0408, 0x0409,
 	0x040a, 0x040b, 0x0502, 0x0503, 0x0504, 0x0505, 0x0540, 0x0541,
 	0x0542, 0x0543, 0x0544, 0x0545, 0x0580, 0x0581, 0x0582, 0x0583,
@@ -279,75 +276,52 @@ u16 rtl8225z2_rxgain[]={
 
 };
 
-//2005.11.16,
-u8 ZEBRA2_CCK_OFDM_GAIN_SETTING[]={
-        0x00,0x01,0x02,0x03,0x04,0x05,
-        0x06,0x07,0x08,0x09,0x0a,0x0b,
-        0x0c,0x0d,0x0e,0x0f,0x10,0x11,
-        0x12,0x13,0x14,0x15,0x16,0x17,
-        0x18,0x19,0x1a,0x1b,0x1c,0x1d,
-        0x1e,0x1f,0x20,0x21,0x22,0x23,
+static const u8 ZEBRA2_CCK_OFDM_GAIN_SETTING[] = {
+	0x00, 0x01, 0x02, 0x03, 0x04, 0x05,
+	0x06, 0x07, 0x08, 0x09, 0x0a, 0x0b,
+	0x0c, 0x0d, 0x0e, 0x0f, 0x10, 0x11,
+	0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
+	0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d,
+	0x1e, 0x1f, 0x20, 0x21, 0x22, 0x23,
 };
 
-/*
- from 0 to 0x23
-u8 rtl8225_tx_gain_cck_ofdm[]={
-	0x02,0x06,0x0e,0x1e,0x3e,0x7e
+static const u8 rtl8225z2_tx_power_ofdm[] = {
+	0x42, 0x00, 0x40, 0x00, 0x40
 };
-*/
 
-//-
-u8 rtl8225z2_tx_power_ofdm[]={
-	0x42,0x00,0x40,0x00,0x40
+static const u8 rtl8225z2_tx_power_cck_ch14[] = {
+	0x36, 0x35, 0x2e, 0x1b, 0x00, 0x00, 0x00, 0x00
 };
 
-
-//-
-u8 rtl8225z2_tx_power_cck_ch14[]={
-	0x36,0x35,0x2e,0x1b,0x00,0x00,0x00,0x00
+static const u8 rtl8225z2_tx_power_cck[] = {
+	0x36, 0x35, 0x2e, 0x25, 0x1c, 0x12, 0x09, 0x04
 };
 
-
-//-
-u8 rtl8225z2_tx_power_cck[]={
-	0x36,0x35,0x2e,0x25,0x1c,0x12,0x09,0x04
-};
-
-
 void rtl8225z2_set_gain(struct net_device *dev, short gain)
 {
-	u8* rtl8225_gain;
+	const u8 *rtl8225_gain;
 	struct r8180_priv *priv = ieee80211_priv(dev);
-
 	u8 mode = priv->ieee80211->mode;
 
-	if(mode == IEEE_B || mode == IEEE_G)
+	if (mode == IEEE_B || mode == IEEE_G)
 		rtl8225_gain = rtl8225z2_gain_bg;
 	else
 		rtl8225_gain = rtl8225z2_gain_a;
 
-	//write_phy_ofdm(dev, 0x0d, rtl8225_gain[gain * 3]);
-	//write_phy_ofdm(dev, 0x19, rtl8225_gain[gain * 3 + 1]);
-	//write_phy_ofdm(dev, 0x1b, rtl8225_gain[gain * 3 + 2]);
-        //2005.11.17, by ch-hsu
-        write_phy_ofdm(dev, 0x0b, rtl8225_gain[gain * 3]);
-        write_phy_ofdm(dev, 0x1b, rtl8225_gain[gain * 3 + 1]);
-        write_phy_ofdm(dev, 0x1d, rtl8225_gain[gain * 3 + 2]);
+	write_phy_ofdm(dev, 0x0b, rtl8225_gain[gain * 3]);
+	write_phy_ofdm(dev, 0x1b, rtl8225_gain[gain * 3 + 1]);
+	write_phy_ofdm(dev, 0x1d, rtl8225_gain[gain * 3 + 2]);
 	write_phy_ofdm(dev, 0x21, 0x37);
-
 }
 
-u32 read_rtl8225(struct net_device *dev, u8 adr)
+static u32 read_rtl8225(struct net_device *dev, u8 adr)
 {
 	u32 data2Write = ((u32)(adr & 0x1f)) << 27;
 	u32 dataRead;
 	u32 mask;
 	u16 oval,oval2,oval3,tmp;
-//	ThreeWireReg twreg;
-//	ThreeWireReg tdata;
 	int i;
 	short bit, rw;
-
 	u8 wLength = 6;
 	u8 rLength = 12;
 	u8 low2high = 0;
@@ -370,8 +344,8 @@ u32 read_rtl8225(struct net_device *dev, u8 adr)
 	rw = 0;
 
 	mask = (low2high) ? 0x01 : (((u32)0x01)<<(32-1));
-	for(i = 0; i < wLength/2; i++)
-	{
+
+	for (i = 0; i < wLength/2; i++) {
 		bit = ((data2Write&mask) != 0) ? 1 : 0;
 		write_nic_word(dev, RFPinsOutput, bit|oval | rw); udelay(1);
 
@@ -380,8 +354,7 @@ u32 read_rtl8225(struct net_device *dev, u8 adr)
 
 		mask = (low2high) ? (mask<<1): (mask>>1);
 
-		if(i == 2)
-		{
+		if (i == 2) {
 			rw = BB_HOST_BANG_RW;
 			write_nic_word(dev, RFPinsOutput, bit|oval | BB_HOST_BANG_CLK | rw); udelay(2);
 			write_nic_word(dev, RFPinsOutput, bit|oval | rw); udelay(2);
@@ -398,17 +371,16 @@ u32 read_rtl8225(struct net_device *dev, u8 adr)
 		mask = (low2high) ? (mask<<1) : (mask>>1);
 	}
 
-	//twreg.struc.clk = 0;
-	//twreg.struc.data = 0;
 	write_nic_word(dev, RFPinsOutput, rw|oval); udelay(2);
 	mask = (low2high) ? 0x01 : (((u32)0x01) << (12-1));
 
-	// We must set data pin to HW controled, otherwise RF can't driver it and
-	// value RF register won't be able to read back properly. 2006.06.13, by rcnjko.
+	/*
+	 * We must set data pin to HW controled, otherwise RF can't driver it
+	 * and value RF register won't be able to read back properly.
+	 */
 	write_nic_word(dev, RFPinsEnable, (oval2 & (~0x01)));
 
-	for(i = 0; i < rLength; i++)
-	{
+	for (i = 0; i < rLength; i++) {
 		write_nic_word(dev, RFPinsOutput, rw|oval); udelay(1);
 
 		write_nic_word(dev, RFPinsOutput, rw|oval|BB_HOST_BANG_CLK); udelay(2);
@@ -426,36 +398,26 @@ u32 read_rtl8225(struct net_device *dev, u8 adr)
 	write_nic_word(dev, RFPinsOutput, BB_HOST_BANG_EN|BB_HOST_BANG_RW|oval); udelay(2);
 
 	write_nic_word(dev, RFPinsEnable, oval2);
-	write_nic_word(dev, RFPinsSelect, oval3);   // Set To SW Switch
+	write_nic_word(dev, RFPinsSelect, oval3); /* Set To SW Switch */
 	write_nic_word(dev, RFPinsOutput, 0x3a0);
 
 	return dataRead;
-
 }
 
 short rtl8225_is_V_z2(struct net_device *dev)
 {
 	short vz2 = 1;
-	//int i;
-	/* sw to reg pg 1 */
-	//write_rtl8225(dev, 0, 0x1b7);
-	//write_rtl8225(dev, 0, 0x0b7);
 
-	/* reg 8 pg 1 = 23*/
-	//printk(KERN_WARNING "RF Rigisters:\n");
-
-	if( read_rtl8225(dev, 8) != 0x588)
+	if (read_rtl8225(dev, 8) != 0x588)
 		vz2 = 0;
-
 	else	/* reg 9 pg 1 = 24 */
-		if( read_rtl8225(dev, 9) != 0x700)
+		if (read_rtl8225(dev, 9) != 0x700)
 			vz2 = 0;
 
 	/* sw back to pg 0 */
 	write_rtl8225(dev, 0, 0xb7);
 
 	return vz2;
-
 }
 
 void rtl8225z2_rf_close(struct net_device *dev)
@@ -469,67 +431,55 @@ void rtl8225z2_rf_close(struct net_device *dev)
 	rtl8185_set_anaparam2(dev, RTL8225z2_ANAPARAM2_OFF);
 }
 
-//
-//	Description:
-//		Map dBm into Tx power index according to
-//		current HW model, for example, RF and PA, and
-//		current wireless mode.
-//
-s8
-DbmToTxPwrIdx(
-	struct r8180_priv *priv,
-	WIRELESS_MODE	WirelessMode,
-	s32			PowerInDbm
-	)
+/*
+ * Map dBm into Tx power index according to current HW model, for example,
+ * RF and PA, and current wireless mode.
+ */
+s8 DbmToTxPwrIdx(struct r8180_priv *priv, WIRELESS_MODE WirelessMode,
+		 s32 PowerInDbm)
 {
  	bool bUseDefault = true;
 	s8 TxPwrIdx = 0;
 
-	//
-	// 071011, SD3 SY:
-	// OFDM Power in dBm = Index * 0.5 + 0
-	// CCK Power in dBm = Index * 0.25 + 13
-	//
-	if(priv->card_8185 >= VERSION_8187S_B)
-	{
+	/*
+	 * OFDM Power in dBm = Index * 0.5 + 0
+	 * CCK Power in dBm = Index * 0.25 + 13
+	 */
+	if (priv->card_8185 >= VERSION_8187S_B) {
 		s32 tmp = 0;
 
-		if(WirelessMode == WIRELESS_MODE_G)
-		{
+		if (WirelessMode == WIRELESS_MODE_G) {
 			bUseDefault = false;
 			tmp = (2 * PowerInDbm);
 
-			if(tmp < 0)
+			if (tmp < 0)
 				TxPwrIdx = 0;
-			else if(tmp > 40) // 40 means 20 dBm.
+			else if (tmp > 40) /* 40 means 20 dBm. */
 				TxPwrIdx = 40;
 			else
 				TxPwrIdx = (s8)tmp;
-		}
-		else if(WirelessMode == WIRELESS_MODE_B)
-		{
+		} else if (WirelessMode == WIRELESS_MODE_B) {
 			bUseDefault = false;
 			tmp = (4 * PowerInDbm) - 52;
 
 			if(tmp < 0)
 				TxPwrIdx = 0;
-			else if(tmp > 28) // 28 means 20 dBm.
+			else if (tmp > 28) /* 28 means 20 dBm. */
 				TxPwrIdx = 28;
 			else
 				TxPwrIdx = (s8)tmp;
 		}
 	}
 
-	//
-	// TRUE if we want to use a default implementation.
-	// We shall set it to FALSE when we have exact translation formular
-	// for target IC. 070622, by rcnjko.
-	//
-	if(bUseDefault)
-	{
-		if(PowerInDbm < 0)
+	/*
+	 * TRUE if we want to use a default implementation.
+	 * We shall set it to FALSE when we have exact translation formular
+	 * for target IC. 070622, by rcnjko.
+	 */
+	if (bUseDefault) {
+		if (PowerInDbm < 0)
 			TxPwrIdx = 0;
-		else if(PowerInDbm > 35)
+		else if (PowerInDbm > 35)
 			TxPwrIdx = 35;
 		else
 			TxPwrIdx = (u8)PowerInDbm;
@@ -541,133 +491,75 @@ DbmToTxPwrIdx(
 void rtl8225z2_SetTXPowerLevel(struct net_device *dev, short ch)
 {
 	struct r8180_priv *priv = ieee80211_priv(dev);
-
-//	int GainIdx;
-//	int GainSetting;
-	//int i;
-	//u8 power;
-	//u8 *cck_power_table;
 	u8 max_cck_power_level;
-	//u8 min_cck_power_level;
 	u8 max_ofdm_power_level;
 	u8 min_ofdm_power_level;
-//	u8 cck_power_level = 0xff & priv->chtxpwr[ch];//-by amy 080312
-//	u8 ofdm_power_level = 0xff & priv->chtxpwr_ofdm[ch];//-by amy 080312
-	char cck_power_level = (char)(0xff & priv->chtxpwr[ch]);//+by amy 080312
-	char ofdm_power_level = (char)(0xff & priv->chtxpwr_ofdm[ch]);//+by amy 080312
-
-	if(IS_DOT11D_ENABLE(priv->ieee80211) &&
-		IS_DOT11D_STATE_DONE(priv->ieee80211) )
-	{
-		//PRT_DOT11D_INFO pDot11dInfo = GET_DOT11D_INFO(priv->ieee80211);
+	char cck_power_level = (char)(0xff & priv->chtxpwr[ch]);
+	char ofdm_power_level = (char)(0xff & priv->chtxpwr_ofdm[ch]);
+
+	if (IS_DOT11D_ENABLE(priv->ieee80211) &&
+	    IS_DOT11D_STATE_DONE(priv->ieee80211)) {
 		u8 MaxTxPwrInDbm = DOT11D_GetMaxTxPwrInDbm(priv->ieee80211, ch);
 		u8 CckMaxPwrIdx = DbmToTxPwrIdx(priv, WIRELESS_MODE_B, MaxTxPwrInDbm);
 		u8 OfdmMaxPwrIdx = DbmToTxPwrIdx(priv, WIRELESS_MODE_G, MaxTxPwrInDbm);
 
-		//printk("Max Tx Power dBm (%d) => CCK Tx power index : %d, OFDM Tx power index: %d\n", MaxTxPwrInDbm, CckMaxPwrIdx, OfdmMaxPwrIdx);
-
-		//printk("EEPROM channel(%d) => CCK Tx power index: %d, OFDM Tx power index: %d\n",
-		//	ch, cck_power_level, ofdm_power_level);
-
-		if(cck_power_level > CckMaxPwrIdx)
+		if (cck_power_level > CckMaxPwrIdx)
 			cck_power_level = CckMaxPwrIdx;
-		if(ofdm_power_level > OfdmMaxPwrIdx)
+		if (ofdm_power_level > OfdmMaxPwrIdx)
 			ofdm_power_level = OfdmMaxPwrIdx;
 	}
 
-	//priv->CurrentCckTxPwrIdx = cck_power_level;
-	//priv->CurrentOfdmTxPwrIdx = ofdm_power_level;
-
 	max_cck_power_level = 15;
-	max_ofdm_power_level = 25; //  12 -> 25
+	max_ofdm_power_level = 25;
 	min_ofdm_power_level = 10;
 
-
-	if(cck_power_level > 35)
-	{
+	if (cck_power_level > 35)
 		cck_power_level = 35;
-	}
-	//
-	// Set up CCK TXAGC. suggested by SD3 SY.
-	//
-       write_nic_byte(dev, CCK_TXAGC, (ZEBRA2_CCK_OFDM_GAIN_SETTING[(u8)cck_power_level]) );
-       //printk("CCK TX power is %x\n", (ZEBRA2_CCK_OFDM_GAIN_SETTING[cck_power_level]));
-       force_pci_posting(dev);
+
+	write_nic_byte(dev, CCK_TXAGC,
+		       (ZEBRA2_CCK_OFDM_GAIN_SETTING[(u8)cck_power_level]));
+	force_pci_posting(dev);
 	mdelay(1);
-	/* OFDM power setting */
-//  Old:
-//	if(ofdm_power_level > max_ofdm_power_level)
-//		ofdm_power_level = 35;
-//	ofdm_power_level += min_ofdm_power_level;
-//  Latest:
-/*	if(ofdm_power_level > (max_ofdm_power_level - min_ofdm_power_level))
-		ofdm_power_level = max_ofdm_power_level;
-	else
-		ofdm_power_level += min_ofdm_power_level;
 
-	ofdm_power_level += priv->ofdm_txpwr_base;
-*/
-	if(ofdm_power_level > 35)
+	if (ofdm_power_level > 35)
 		ofdm_power_level = 35;
 
-//	rtl8185_set_anaparam2(dev,RTL8225_ANAPARAM2_ON);
-
-	//rtl8185_set_anaparam2(dev, ANAPARM2_ASIC_ON);
-
 	if (priv->up == 0) {
-		//must add these for rtl8185B down, xiong-2006-11-21
-		write_phy_ofdm(dev,2,0x42);
-		write_phy_ofdm(dev,5,0);
-		write_phy_ofdm(dev,6,0x40);
-		write_phy_ofdm(dev,7,0);
-		write_phy_ofdm(dev,8,0x40);
+		write_phy_ofdm(dev, 2, 0x42);
+		write_phy_ofdm(dev, 5, 0x00);
+		write_phy_ofdm(dev, 6, 0x40);
+		write_phy_ofdm(dev, 7, 0x00);
+		write_phy_ofdm(dev, 8, 0x40);
 	}
 
-	//write_nic_byte(dev, TX_GAIN_OFDM, ofdm_power_level);
-	//2005.11.17,
-        write_nic_byte(dev, OFDM_TXAGC, ZEBRA2_CCK_OFDM_GAIN_SETTING[(u8)ofdm_power_level]);
-        if(ofdm_power_level<=11)
-        {
-//            write_nic_dword(dev,PHY_ADR,0x00005c87);
-//            write_nic_dword(dev,PHY_ADR,0x00005c89);
-		write_phy_ofdm(dev,0x07,0x5c);
-		write_phy_ofdm(dev,0x09,0x5c);
-        }
-	if(ofdm_power_level<=17)
-        {
-//             write_nic_dword(dev,PHY_ADR,0x00005487);
-//             write_nic_dword(dev,PHY_ADR,0x00005489);
-		write_phy_ofdm(dev,0x07,0x54);
-		write_phy_ofdm(dev,0x09,0x54);
-        }
-        else
-        {
-//             write_nic_dword(dev,PHY_ADR,0x00005087);
-//             write_nic_dword(dev,PHY_ADR,0x00005089);
-		write_phy_ofdm(dev,0x07,0x50);
-		write_phy_ofdm(dev,0x09,0x50);
+	write_nic_byte(dev, OFDM_TXAGC,
+		       ZEBRA2_CCK_OFDM_GAIN_SETTING[(u8)ofdm_power_level]);
+
+	if (ofdm_power_level <= 11) {
+		write_phy_ofdm(dev, 0x07, 0x5c);
+		write_phy_ofdm(dev, 0x09, 0x5c);
         }
+
+	if (ofdm_power_level <= 17) {
+		write_phy_ofdm(dev, 0x07, 0x54);
+		write_phy_ofdm(dev, 0x09, 0x54);
+	} else {
+		write_phy_ofdm(dev, 0x07, 0x50);
+		write_phy_ofdm(dev, 0x09, 0x50);
+	}
+
 	force_pci_posting(dev);
 	mdelay(1);
-
 }
 
 void rtl8225z2_rf_set_chan(struct net_device *dev, short ch)
 {
-/*
-	short gset = (priv->ieee80211->state == IEEE80211_LINKED &&
-		ieee80211_is_54g(priv->ieee80211->current_network)) ||
-		priv->ieee80211->iw_mode == IW_MODE_MONITOR;
-*/
 	rtl8225z2_SetTXPowerLevel(dev, ch);
 
 	RF_WriteReg(dev, 0x7, rtl8225_chan[ch]);
 
-	//YJ,add,080828, if set channel failed, write again
-	if((RF_ReadReg(dev, 0x7) & 0x0F80) != rtl8225_chan[ch])
-	{
+	if ((RF_ReadReg(dev, 0x7) & 0x0F80) != rtl8225_chan[ch])
 		RF_WriteReg(dev, 0x7, rtl8225_chan[ch]);
-	}
 
 	mdelay(1);
 
@@ -739,8 +631,6 @@ void rtl8225z2_rf_init(struct net_device *dev)
 
 	priv->chan = channel;
 
-//	rtl8180_set_anaparam(dev, RTL8225_ANAPARAM_ON);
-
 	if (priv->card_type != USB)
 		rtl8225_host_pci_init(dev);
 
@@ -750,74 +640,40 @@ void rtl8225z2_rf_init(struct net_device *dev)
 
 	write_nic_word(dev, BRSR, 0xffff);
 
-
 	write_nic_dword(dev, RF_PARA, 0x100044);
 
-	#if 1  //0->1
 	rtl8180_set_mode(dev, EPROM_CMD_CONFIG);
 	write_nic_byte(dev, CONFIG3, 0x44);
 	rtl8180_set_mode(dev, EPROM_CMD_NORMAL);
-	#endif
-
 
 	rtl8185_rf_pins_enable(dev);
 
-//		mdelay(1000);
-
 	write_rtl8225(dev, 0x0, 0x2bf); mdelay(1);
-
-
 	write_rtl8225(dev, 0x1, 0xee0); mdelay(1);
-
 	write_rtl8225(dev, 0x2, 0x44d); mdelay(1);
-
 	write_rtl8225(dev, 0x3, 0x441); mdelay(1);
-
-
-	write_rtl8225(dev, 0x4, 0x8c3);mdelay(1);
-
-
-
-	write_rtl8225(dev, 0x5, 0xc72);mdelay(1);
-//	}
-
+	write_rtl8225(dev, 0x4, 0x8c3); mdelay(1);
+	write_rtl8225(dev, 0x5, 0xc72); mdelay(1);
 	write_rtl8225(dev, 0x6, 0xe6);  mdelay(1);
-
 	write_rtl8225(dev, 0x7, ((priv->card_type == USB)? 0x82a : rtl8225_chan[channel]));  mdelay(1);
-
 	write_rtl8225(dev, 0x8, 0x3f);  mdelay(1);
-
-	write_rtl8225(dev, 0x9, 0x335);  mdelay(1);
-
-	write_rtl8225(dev, 0xa, 0x9d4);  mdelay(1);
-
-	write_rtl8225(dev, 0xb, 0x7bb);  mdelay(1);
-
-	write_rtl8225(dev, 0xc, 0x850);  mdelay(1);
-
-
-	write_rtl8225(dev, 0xd, 0xcdf);   mdelay(1);
-
+	write_rtl8225(dev, 0x9, 0x335); mdelay(1);
+	write_rtl8225(dev, 0xa, 0x9d4); mdelay(1);
+	write_rtl8225(dev, 0xb, 0x7bb); mdelay(1);
+	write_rtl8225(dev, 0xc, 0x850); mdelay(1);
+	write_rtl8225(dev, 0xd, 0xcdf); mdelay(1);
 	write_rtl8225(dev, 0xe, 0x2b);  mdelay(1);
-
 	write_rtl8225(dev, 0xf, 0x114);
 
-
 	mdelay(100);
 
-
-	//if(priv->card_type != USB) /* maybe not needed even for 8185 */
-//	write_rtl8225(dev, 0x7, rtl8225_chan[channel]);
-
 	write_rtl8225(dev, 0x0, 0x1b7);
 
-	for(i=0;i<95;i++){
-		write_rtl8225(dev, 0x1, (u8)(i+1));
-
-		/* version B & C & D*/
-
+	for (i = 0; i < 95; i++) {
+		write_rtl8225(dev, 0x1, (u8)(i + 1));
 		write_rtl8225(dev, 0x2, rtl8225z2_rxgain[i]);
 	}
+
 	write_rtl8225(dev, 0x3, 0x80);
 	write_rtl8225(dev, 0x5, 0x4);
 
@@ -825,160 +681,90 @@ void rtl8225z2_rf_init(struct net_device *dev)
 
 	write_rtl8225(dev, 0x2, 0xc4d);
 
-	if(priv->card_type == USB){
-	//	force_pci_posting(dev);
+	if (priv->card_type == USB) {
 		mdelay(200);
 
 		write_rtl8225(dev, 0x2, 0x44d);
-
-	//	force_pci_posting(dev);
 		mdelay(100);
+	}
 
-	}//End of if(priv->card_type == USB)
 	/* FIXME!! rtl8187 we have to check if calibrarion
 	 * is successful and eventually cal. again (repeat
 	 * the two write on reg 2)
-	*/
-	// Check for calibration status, 2005.11.17,
-        data = read_rtl8225(dev, 6);
-        if (!(data&0x00000080))
-        {
-                write_rtl8225(dev, 0x02, 0x0c4d);
-                force_pci_posting(dev); mdelay(200);
-                write_rtl8225(dev, 0x02, 0x044d);
-                force_pci_posting(dev); mdelay(100);
-                data = read_rtl8225(dev, 6);
-                if (!(data&0x00000080))
-                        {
-                                DMESGW("RF Calibration Failed!!!!\n");
-                        }
-        }
-	//force_pci_posting(dev);
-
-	mdelay(200); //200 for 8187
-
+	 */
+	data = read_rtl8225(dev, 6);
+	if (!(data & 0x00000080)) {
+		write_rtl8225(dev, 0x02, 0x0c4d);
+		force_pci_posting(dev); mdelay(200);
+		write_rtl8225(dev, 0x02, 0x044d);
+		force_pci_posting(dev); mdelay(100);
+		data = read_rtl8225(dev, 6);
+		if (!(data & 0x00000080))
+			DMESGW("RF Calibration Failed!!!!\n");
+	}
 
-//	//if(priv->card_type != USB){
-//		write_rtl8225(dev, 0x2, 0x44d);
-//		write_rtl8225(dev, 0x7, rtl8225_chan[channel]);
-//		write_rtl8225(dev, 0x2, 0x47d);
-//
-//		force_pci_posting(dev);
-//		mdelay(100);
-//
-//		write_rtl8225(dev, 0x2, 0x44d);
-//	//}
+	mdelay(200);
 
 	write_rtl8225(dev, 0x0, 0x2bf);
 
-	if(priv->card_type != USB)
+	if (priv->card_type != USB)
 		rtl8185_rf_pins_enable(dev);
-	//set up ZEBRA AGC table, 2005.11.17,
-        for(i=0;i<128;i++){
-                data = rtl8225_agc[i];
 
-                addr = i + 0x80; //enable writing AGC table
-                write_phy_ofdm(dev, 0xb, data);
+	for (i = 0; i < 128; i++) {
+		data = rtl8225_agc[i];
 
-                mdelay(1);
-                write_phy_ofdm(dev, 0xa, addr);
+		addr = i + 0x80; /* enable writing AGC table */
+		write_phy_ofdm(dev, 0xb, data);
+		mdelay(1);
 
-                mdelay(1);
-        }
+		write_phy_ofdm(dev, 0xa, addr);
+		mdelay(1);
+	}
 
 	force_pci_posting(dev);
 	mdelay(1);
 
-	write_phy_ofdm(dev, 0x0, 0x1); mdelay(1);
-	write_phy_ofdm(dev, 0x1, 0x2); mdelay(1);
-	write_phy_ofdm(dev, 0x2, ((priv->card_type == USB)? 0x42 : 0x62)); mdelay(1);
-	write_phy_ofdm(dev, 0x3, 0x0); mdelay(1);
-	write_phy_ofdm(dev, 0x4, 0x0); mdelay(1);
-	write_phy_ofdm(dev, 0x5, 0x0); mdelay(1);
-	write_phy_ofdm(dev, 0x6, 0x40); mdelay(1);
-	write_phy_ofdm(dev, 0x7, 0x0); mdelay(1);
-	write_phy_ofdm(dev, 0x8, 0x40); mdelay(1);
-	write_phy_ofdm(dev, 0x9, 0xfe); mdelay(1);
-
-	write_phy_ofdm(dev, 0xa, 0x8); mdelay(1);
-
-	//write_phy_ofdm(dev, 0x18, 0xef);
-	//	}
-	//}
-	write_phy_ofdm(dev, 0xb, 0x80); mdelay(1);
-
-	write_phy_ofdm(dev, 0xc, 0x1);mdelay(1);
-
-
-	//if(priv->card_type != USB)
-	write_phy_ofdm(dev, 0xd, 0x43);
-
-	write_phy_ofdm(dev, 0xe, 0xd3);mdelay(1);
-
-
-	write_phy_ofdm(dev, 0xf, 0x38);mdelay(1);
-/*ver D & 8187*/
-//	}
-
-//	if(priv->card_8185 == 1 && priv->card_8185_Bversion)
-//		write_phy_ofdm(dev, 0x10, 0x04);/*ver B*/
-//	else
-	write_phy_ofdm(dev, 0x10, 0x84);mdelay(1);
-/*ver C & D & 8187*/
-
-	write_phy_ofdm(dev, 0x11, 0x07);mdelay(1);
-/*agc resp time 700*/
-
-
-//	if(priv->card_8185 == 2){
-	/* Ver D & 8187*/
-	write_phy_ofdm(dev, 0x12, 0x20);mdelay(1);
-
-	write_phy_ofdm(dev, 0x13, 0x20);mdelay(1);
-
-	write_phy_ofdm(dev, 0x14, 0x0); mdelay(1);
+	write_phy_ofdm(dev, 0x00, 0x01); mdelay(1);
+	write_phy_ofdm(dev, 0x01, 0x02); mdelay(1);
+	write_phy_ofdm(dev, 0x02, ((priv->card_type == USB) ? 0x42 : 0x62)); mdelay(1);
+	write_phy_ofdm(dev, 0x03, 0x00); mdelay(1);
+	write_phy_ofdm(dev, 0x04, 0x00); mdelay(1);
+	write_phy_ofdm(dev, 0x05, 0x00); mdelay(1);
+	write_phy_ofdm(dev, 0x06, 0x40); mdelay(1);
+	write_phy_ofdm(dev, 0x07, 0x00); mdelay(1);
+	write_phy_ofdm(dev, 0x08, 0x40); mdelay(1);
+	write_phy_ofdm(dev, 0x09, 0xfe); mdelay(1);
+	write_phy_ofdm(dev, 0x0a, 0x08); mdelay(1);
+	write_phy_ofdm(dev, 0x0b, 0x80); mdelay(1);
+	write_phy_ofdm(dev, 0x0c, 0x01); mdelay(1);
+	write_phy_ofdm(dev, 0x0d, 0x43);
+	write_phy_ofdm(dev, 0x0e, 0xd3); mdelay(1);
+	write_phy_ofdm(dev, 0x0f, 0x38); mdelay(1);
+	write_phy_ofdm(dev, 0x10, 0x84); mdelay(1);
+	write_phy_ofdm(dev, 0x11, 0x07); mdelay(1);
+	write_phy_ofdm(dev, 0x12, 0x20); mdelay(1);
+	write_phy_ofdm(dev, 0x13, 0x20); mdelay(1);
+	write_phy_ofdm(dev, 0x14, 0x00); mdelay(1);
 	write_phy_ofdm(dev, 0x15, 0x40); mdelay(1);
-	write_phy_ofdm(dev, 0x16, 0x0); mdelay(1);
+	write_phy_ofdm(dev, 0x16, 0x00); mdelay(1);
 	write_phy_ofdm(dev, 0x17, 0x40); mdelay(1);
-
-//	if (priv->card_type == USB)
-//		write_phy_ofdm(dev, 0x18, 0xef);
-
-	write_phy_ofdm(dev, 0x18, 0xef);mdelay(1);
-
-
+	write_phy_ofdm(dev, 0x18, 0xef); mdelay(1);
 	write_phy_ofdm(dev, 0x19, 0x19); mdelay(1);
 	write_phy_ofdm(dev, 0x1a, 0x20); mdelay(1);
-	write_phy_ofdm(dev, 0x1b, 0x15);mdelay(1);
-
-	write_phy_ofdm(dev, 0x1c, 0x4);mdelay(1);
-
-	write_phy_ofdm(dev, 0x1d, 0xc5);mdelay(1); //2005.11.17,
-
-	write_phy_ofdm(dev, 0x1e, 0x95);mdelay(1);
-
-	write_phy_ofdm(dev, 0x1f, 0x75);	mdelay(1);
-
-//	}
-
-	write_phy_ofdm(dev, 0x20, 0x1f);mdelay(1);
-
-	write_phy_ofdm(dev, 0x21, 0x17);mdelay(1);
-
-	write_phy_ofdm(dev, 0x22, 0x16);mdelay(1);
-
-//	if(priv->card_type != USB)
-	write_phy_ofdm(dev, 0x23, 0x80);mdelay(1); //FIXME maybe not needed // <>
-
+	write_phy_ofdm(dev, 0x1b, 0x15); mdelay(1);
+	write_phy_ofdm(dev, 0x1c, 0x04); mdelay(1);
+	write_phy_ofdm(dev, 0x1d, 0xc5); mdelay(1);
+	write_phy_ofdm(dev, 0x1e, 0x95); mdelay(1);
+	write_phy_ofdm(dev, 0x1f, 0x75); mdelay(1);
+	write_phy_ofdm(dev, 0x20, 0x1f); mdelay(1);
+	write_phy_ofdm(dev, 0x21, 0x17); mdelay(1);
+	write_phy_ofdm(dev, 0x22, 0x16); mdelay(1);
+	write_phy_ofdm(dev, 0x23, 0x80); mdelay(1); /* FIXME maybe not needed */
 	write_phy_ofdm(dev, 0x24, 0x46); mdelay(1);
 	write_phy_ofdm(dev, 0x25, 0x00); mdelay(1);
 	write_phy_ofdm(dev, 0x26, 0x90); mdelay(1);
-
 	write_phy_ofdm(dev, 0x27, 0x88); mdelay(1);
 
-
-	// <> Set init. gain to m74dBm.
-
 	rtl8225z2_set_gain(dev,4);
 
 	write_phy_cck(dev, 0x0, 0x98); mdelay(1);
@@ -986,90 +772,57 @@ void rtl8225z2_rf_init(struct net_device *dev)
 	write_phy_cck(dev, 0x4, 0x7e); mdelay(1);
 	write_phy_cck(dev, 0x5, 0x12); mdelay(1);
 	write_phy_cck(dev, 0x6, 0xfc); mdelay(1);
-
-	write_phy_cck(dev, 0x7, 0x78);mdelay(1);
- /* Ver C & D & 8187*/
-
-	write_phy_cck(dev, 0x8, 0x2e);mdelay(1);
-
+	write_phy_cck(dev, 0x7, 0x78); mdelay(1);
+	write_phy_cck(dev, 0x8, 0x2e); mdelay(1);
 	write_phy_cck(dev, 0x10, ((priv->card_type == USB) ? 0x9b: 0x93)); mdelay(1);
 	write_phy_cck(dev, 0x11, 0x88); mdelay(1);
 	write_phy_cck(dev, 0x12, 0x47); mdelay(1);
-	write_phy_cck(dev, 0x13, 0xd0); /* Ver C & D & 8187*/
-
-	write_phy_cck(dev, 0x19, 0x0);
+	write_phy_cck(dev, 0x13, 0xd0);
+	write_phy_cck(dev, 0x19, 0x00);
 	write_phy_cck(dev, 0x1a, 0xa0);
-	write_phy_cck(dev, 0x1b, 0x8);
+	write_phy_cck(dev, 0x1b, 0x08);
 	write_phy_cck(dev, 0x40, 0x86); /* CCK Carrier Sense Threshold */
-
-	write_phy_cck(dev, 0x41, 0x8d);mdelay(1);
-
-
+	write_phy_cck(dev, 0x41, 0x8d); mdelay(1);
 	write_phy_cck(dev, 0x42, 0x15); mdelay(1);
 	write_phy_cck(dev, 0x43, 0x18); mdelay(1);
-
-
 	write_phy_cck(dev, 0x44, 0x36); mdelay(1);
 	write_phy_cck(dev, 0x45, 0x35); mdelay(1);
 	write_phy_cck(dev, 0x46, 0x2e); mdelay(1);
 	write_phy_cck(dev, 0x47, 0x25); mdelay(1);
 	write_phy_cck(dev, 0x48, 0x1c); mdelay(1);
 	write_phy_cck(dev, 0x49, 0x12); mdelay(1);
-	write_phy_cck(dev, 0x4a, 0x9); mdelay(1);
-	write_phy_cck(dev, 0x4b, 0x4); mdelay(1);
-	write_phy_cck(dev, 0x4c, 0x5);mdelay(1);
-
+	write_phy_cck(dev, 0x4a, 0x09); mdelay(1);
+	write_phy_cck(dev, 0x4b, 0x04); mdelay(1);
+	write_phy_cck(dev, 0x4c, 0x05); mdelay(1);
 
 	write_nic_byte(dev, 0x5b, 0x0d); mdelay(1);
 
-
-
-// <>
-//	// TESTR 0xb 8187
-//	write_phy_cck(dev, 0x10, 0x93);// & 0xfb);
-//
-//	//if(priv->card_type != USB){
-//		write_phy_ofdm(dev, 0x2, 0x62);
-//		write_phy_ofdm(dev, 0x6, 0x0);
-//		write_phy_ofdm(dev, 0x8, 0x0);
-//	//}
-
 	rtl8225z2_SetTXPowerLevel(dev, channel);
-        write_phy_cck(dev, 0x11, 0x9b); mdelay(1); /* Rx ant A, 0xdb for B */
-	write_phy_ofdm(dev, 0x26, 0x90); mdelay(1); /* Rx ant A, 0x10 for B */
 
-	rtl8185_tx_antenna(dev, 0x3); /* TX ant A, 0x0 for B */
+	/* RX antenna default to A */
+	write_phy_cck(dev, 0x11, 0x9b); mdelay(1);		/* B: 0xDB */
+	write_phy_ofdm(dev, 0x26, 0x90); mdelay(1);		/* B: 0x10 */
+
+	rtl8185_tx_antenna(dev, 0x03);				/* B: 0x00 */
 
 	/* switch to high-speed 3-wire
 	 * last digit. 2 for both cck and ofdm
 	 */
-	if(priv->card_type == USB)
+	if (priv->card_type == USB)
 		write_nic_dword(dev, 0x94, 0x3dc00002);
-	else{
+	else {
 		write_nic_dword(dev, 0x94, 0x15c00002);
 		rtl8185_rf_pins_enable(dev);
 	}
 
-//	 rtl8225_set_mode(dev, 1); /* FIXME start in B mode */ // <>
-//
-//	/* make sure is waken up! */
-//	write_rtl8225(dev,0x4, 0x9ff);
-//	rtl8180_set_anaparam(dev, RTL8225_ANAPARAM_ON);
-//	rtl8185_set_anaparam2(dev, RTL8225_ANAPARAM2_ON);
-
 	rtl8225_rf_set_chan(dev, priv->chan);
-
-	//write_nic_word(dev,BRSR,brsr);
-
-	//rtl8225z2_rf_set_mode(dev);
 }
 
 void rtl8225z2_rf_set_mode(struct net_device *dev)
 {
 	struct r8180_priv *priv = ieee80211_priv(dev);
 
-	if(priv->ieee80211->mode == IEEE_A)
-	{
+	if (priv->ieee80211->mode == IEEE_A) {
 		write_rtl8225(dev, 0x5, 0x1865);
 		write_nic_dword(dev, RF_PARA, 0x10084);
 		write_nic_dword(dev, RF_TIMING, 0xa8008);
@@ -1085,8 +838,7 @@ void rtl8225z2_rf_set_mode(struct net_device *dev)
 		write_phy_ofdm(dev,0x17, 0x40);
 
 		write_nic_dword(dev, 0x94,0x10000000);
-	}else{
-
+	} else {
 		write_rtl8225(dev, 0x5, 0x1864);
 		write_nic_dword(dev, RF_PARA, 0x10044);
 		write_nic_dword(dev, RF_TIMING, 0xa8008);
@@ -1105,46 +857,35 @@ void rtl8225z2_rf_set_mode(struct net_device *dev)
 	}
 }
 
-//lzm mod 080826
-//#define MAX_DOZE_WAITING_TIMES_85B 64
-//#define MAX_POLLING_24F_TIMES_87SE 	5
 #define MAX_DOZE_WAITING_TIMES_85B 		20
-#define MAX_POLLING_24F_TIMES_87SE 			10
+#define MAX_POLLING_24F_TIMES_87SE 		10
 #define LPS_MAX_SLEEP_WAITING_TIMES_87SE 	5
 
-bool
-SetZebraRFPowerState8185(
-	struct net_device *dev,
-	RT_RF_POWER_STATE	eRFPowerState
-	)
+bool SetZebraRFPowerState8185(struct net_device *dev,
+			      RT_RF_POWER_STATE eRFPowerState)
 {
 	struct r8180_priv *priv = ieee80211_priv(dev);
 	u8			btCR9346, btConfig3;
-	bool bActionAllowed= true, bTurnOffBB = true;//lzm mod 080826
-	//u32			DWordContent;
+	bool bActionAllowed = true, bTurnOffBB = true;
 	u8			u1bTmp;
 	int			i;
-	//u16			u2bTFPC = 0;
 	bool		bResult = true;
 	u8			QueueID;
 
-	if(priv->SetRFPowerStateInProgress == true)
+	if (priv->SetRFPowerStateInProgress == true)
 		return false;
 
 	priv->SetRFPowerStateInProgress = true;
 
-	// enable EEM0 and EEM1 in 9346CR
 	btCR9346 = read_nic_byte(dev, CR9346);
-	write_nic_byte(dev, CR9346, (btCR9346|0xC0) );
-	// enable PARM_En in Config3
+	write_nic_byte(dev, CR9346, (btCR9346 | 0xC0));
+
 	btConfig3 = read_nic_byte(dev, CONFIG3);
-	write_nic_byte(dev, CONFIG3, (btConfig3|CONFIG3_PARM_En) );
+	write_nic_byte(dev, CONFIG3, (btConfig3 | CONFIG3_PARM_En));
 
-	switch( priv->rf_chip )
-	{
+	switch (priv->rf_chip) {
 	case RF_ZEBRA2:
-		switch( eRFPowerState )
-		{
+		switch (eRFPowerState) {
 		case eRfOn:
 			RF_WriteReg(dev,0x4,0x9FF);
 
@@ -1153,233 +894,168 @@ SetZebraRFPowerState8185(
 
 			write_nic_byte(dev, CONFIG4, priv->RFProgType);
 
-			//Follow 87B, Isaiah 2007-04-27
+			/* turn on CCK and OFDM */
 			u1bTmp = read_nic_byte(dev, 0x24E);
-			write_nic_byte(dev, 0x24E, (u1bTmp & (~(BIT5|BIT6))) );// 070124 SD1 Alex: turn on CCK and OFDM.
+			write_nic_byte(dev, 0x24E, (u1bTmp & (~(BIT5 | BIT6))));
 			break;
-
 		case eRfSleep:
 			break;
-
 		case eRfOff:
 			break;
-
 		default:
 			bResult = false;
 			break;
 		}
 		break;
-
 	case RF_ZEBRA4:
-		switch( eRFPowerState )
-		{
+		switch (eRFPowerState) {
 		case eRfOn:
-			//printk("===================================power on@jiffies:%d\n",jiffies);
 			write_nic_word(dev, 0x37C, 0x00EC);
 
-			//turn on AFE
+			/* turn on AFE */
 			write_nic_byte(dev, 0x54, 0x00);
 			write_nic_byte(dev, 0x62, 0x00);
 
-			//lzm mod 080826
-			//turn on RF
-			//RF_WriteReg(dev, 0x0, 0x009f); //mdelay(1);
-			//RF_WriteReg(dev, 0x4, 0x0972); //mdelay(1);
+			/* turn on RF */
 			RF_WriteReg(dev, 0x0, 0x009f); udelay(500);
 			RF_WriteReg(dev, 0x4, 0x0972); udelay(500);
-			//turn on RF again, suggested by SD3 stevenl.
+
+			/* turn on RF again */
 			RF_WriteReg(dev, 0x0, 0x009f); udelay(500);
 			RF_WriteReg(dev, 0x4, 0x0972); udelay(500);
 
-			//turn on BB
-//			write_nic_dword(dev, PhyAddr, 0x4090); //ofdm 10=00
-//			write_nic_dword(dev, PhyAddr, 0x4092); //ofdm 12=00
+			/* turn on BB */
 			write_phy_ofdm(dev,0x10,0x40);
 			write_phy_ofdm(dev,0x12,0x40);
-			//Avoid power down at init time.
+
+			/* Avoid power down at init time. */
 			write_nic_byte(dev, CONFIG4, priv->RFProgType);
 
 			u1bTmp = read_nic_byte(dev, 0x24E);
-			write_nic_byte(dev, 0x24E, (u1bTmp & (~(BIT5|BIT6))) );
-
+			write_nic_byte(dev, 0x24E, (u1bTmp & (~(BIT5 | BIT6))));
 			break;
-
 		case eRfSleep:
-			// Make sure BusyQueue is empty befor turn off RFE pwoer.
-			//printk("===================================power sleep@jiffies:%d\n",jiffies);
-
-			for(QueueID = 0, i = 0; QueueID < 6; )
-			{
-				if(get_curr_tx_free_desc(dev,QueueID) == priv->txringcount)
-				{
+			for (QueueID = 0, i = 0; QueueID < 6;) {
+				if (get_curr_tx_free_desc(dev, QueueID) == priv->txringcount) {
 					QueueID++;
 					continue;
-				}
-				else//lzm mod 080826
-				{
+				} else {
 					priv->TxPollingTimes ++;
-					if(priv->TxPollingTimes >= LPS_MAX_SLEEP_WAITING_TIMES_87SE)
-						{
-							//RT_TRACE(COMP_POWER, DBG_WARNING, ("\n\n\n SetZebraRFPowerState8185B():eRfSleep:  %d times TcbBusyQueue[%d] != 0 !!!\n\n\n", LPS_MAX_SLEEP_WAITING_TIMES_87SE, QueueID));
-							bActionAllowed=false;
-							break;
-						}
-						else
-						{
-							udelay(10);  // Windows may delay 3~16ms actually.
-							//RT_TRACE(COMP_POWER, DBG_LOUD, ("eRfSleep: %d times TcbBusyQueue[%d] !=0 before doze!\n", (pMgntInfo->TxPollingTimes), QueueID));
-						}
+					if (priv->TxPollingTimes >= LPS_MAX_SLEEP_WAITING_TIMES_87SE) {
+						bActionAllowed = false;
+						break;
+					} else
+						udelay(10);
 				}
-
-				//lzm del 080826
-				//if(i >= MAX_DOZE_WAITING_TIMES_85B)
-				//{
-					//printk("\n\n\n SetZebraRFPowerState8185B(): %d times BusyQueue[%d] != 0 !!!\n\n\n", MAX_DOZE_WAITING_TIMES_85B, QueueID);
-					//break;
-				//}
 			}
 
-			if(bActionAllowed)//lzm add 080826
-			{
-				//turn off BB RXIQ matrix to cut off rx signal
-//				write_nic_dword(dev, PhyAddr, 0x0090); //ofdm 10=00
-//				write_nic_dword(dev, PhyAddr, 0x0092); //ofdm 12=00
-				write_phy_ofdm(dev,0x10,0x00);
-				write_phy_ofdm(dev,0x12,0x00);
-				//turn off RF
-				RF_WriteReg(dev, 0x4, 0x0000); //mdelay(1);
-				RF_WriteReg(dev, 0x0, 0x0000); //mdelay(1);
-				//turn off AFE except PLL
+			if (bActionAllowed) {
+				/* turn off BB RXIQ matrix to cut off rx signal */
+				write_phy_ofdm(dev, 0x10, 0x00);
+				write_phy_ofdm(dev, 0x12, 0x00);
+
+				/* turn off RF */
+				RF_WriteReg(dev, 0x4, 0x0000);
+				RF_WriteReg(dev, 0x0, 0x0000);
+
+				/* turn off AFE except PLL */
 				write_nic_byte(dev, 0x62, 0xff);
 				write_nic_byte(dev, 0x54, 0xec);
-//				mdelay(10);
 
-#if 1
 				mdelay(1);
+
 				{
 					int i = 0;
-					while (true)
-					{
+					while (true) {
 						u8 tmp24F = read_nic_byte(dev, 0x24f);
-						if ((tmp24F == 0x01) || (tmp24F == 0x09))
-						{
+
+						if ((tmp24F == 0x01) || (tmp24F == 0x09)) {
 							bTurnOffBB = true;
 							break;
-						}
-						else//lzm mod 080826
-						{
+						} else {
 							udelay(10);
 							i++;
 							priv->TxPollingTimes++;
 
-							if(priv->TxPollingTimes >= LPS_MAX_SLEEP_WAITING_TIMES_87SE)
-							{
-								//RT_TRACE(COMP_POWER, DBG_WARNING, ("\n\n\n SetZebraRFPowerState8185B(): eRfOff: %d times Rx Mac0x24F=0x%x !!!\n\n\n", i, u1bTmp24F));
-								bTurnOffBB=false;
+							if (priv->TxPollingTimes >= LPS_MAX_SLEEP_WAITING_TIMES_87SE) {
+								bTurnOffBB = false;
 								break;
-							}
-							else
-							{
-								udelay(10);// Windows may delay 3~16ms actually.
-								//RT_TRACE(COMP_POWER, DBG_LOUD,("(%d)eRfSleep- u1bTmp24F= 0x%X\n", i, u1bTmp24F));
-
-							}
+							} else
+								udelay(10);
 						}
-
-						//lzm del 080826
-						//if (i > MAX_POLLING_24F_TIMES_87SE)
-						//	break;
 					}
 				}
-#endif
-				if (bTurnOffBB)//lzm mod 080826
-				{
-				//turn off BB
-				u1bTmp = read_nic_byte(dev, 0x24E);
-				write_nic_byte(dev, 0x24E, (u1bTmp|BIT5|BIT6));
 
-				//turn off AFE PLL
-				//write_nic_byte(dev, 0x54, 0xec);
-				//write_nic_word(dev, 0x37C, 0x00ec);
-				write_nic_byte(dev, 0x54, 0xFC);  //[ECS] FC-> EC->FC, asked by SD3 Stevenl
-				write_nic_word(dev, 0x37C, 0x00FC);//[ECS] FC-> EC->FC, asked by SD3 Stevenl
+				if (bTurnOffBB) {
+					/* turn off BB */
+					u1bTmp = read_nic_byte(dev, 0x24E);
+					write_nic_byte(dev, 0x24E, (u1bTmp | BIT5 | BIT6));
+
+					/* turn off AFE PLL */
+					write_nic_byte(dev, 0x54, 0xFC);
+					write_nic_word(dev, 0x37C, 0x00FC);
 				}
 			}
 			break;
-
 		case eRfOff:
-			// Make sure BusyQueue is empty befor turn off RFE pwoer.
-			//printk("===================================power off@jiffies:%d\n",jiffies);
-			for(QueueID = 0, i = 0; QueueID < 6; )
-			{
-				if(get_curr_tx_free_desc(dev,QueueID) == priv->txringcount)
-				{
+			for (QueueID = 0, i = 0; QueueID < 6;) {
+				if (get_curr_tx_free_desc(dev, QueueID) == priv->txringcount) {
 					QueueID++;
 					continue;
-				}
-				else
-				{
+				} else {
 					udelay(10);
 					i++;
 				}
 
-				if(i >= MAX_DOZE_WAITING_TIMES_85B)
-				{
-					//printk("\n\n\n SetZebraRFPowerState8185B(): %d times BusyQueue[%d] != 0 !!!\n\n\n", MAX_DOZE_WAITING_TIMES_85B, QueueID);
+				if (i >= MAX_DOZE_WAITING_TIMES_85B)
 					break;
-				}
 			}
 
-			//turn off BB RXIQ matrix to cut off rx signal
-//			write_nic_dword(dev, PhyAddr, 0x0090); //ofdm 10=00
-//			write_nic_dword(dev, PhyAddr, 0x0092); //ofdm 12=00
-			write_phy_ofdm(dev,0x10,0x00);
-			write_phy_ofdm(dev,0x12,0x00);
-			//turn off RF
-			RF_WriteReg(dev, 0x4, 0x0000); //mdelay(1);
-			RF_WriteReg(dev, 0x0, 0x0000); //mdelay(1);
-			//turn off AFE except PLL
+			/* turn off BB RXIQ matrix to cut off rx signal */
+			write_phy_ofdm(dev, 0x10, 0x00);
+			write_phy_ofdm(dev, 0x12, 0x00);
+
+			/* turn off RF */
+			RF_WriteReg(dev, 0x4, 0x0000);
+			RF_WriteReg(dev, 0x0, 0x0000);
+
+			/* turn off AFE except PLL */
 			write_nic_byte(dev, 0x62, 0xff);
 			write_nic_byte(dev, 0x54, 0xec);
-//			mdelay(10);
-#if 1
+
 			mdelay(1);
+
 			{
 				int i = 0;
+
 				while (true)
 				{
 					u8 tmp24F = read_nic_byte(dev, 0x24f);
-					if ((tmp24F == 0x01) || (tmp24F == 0x09))
-					{
+
+					if ((tmp24F == 0x01) || (tmp24F == 0x09)) {
 						bTurnOffBB = true;
 						break;
-					}
-					else
-					{
+					} else {
 						bTurnOffBB = false;
 						udelay(10);
 						i++;
 					}
+
 					if (i > MAX_POLLING_24F_TIMES_87SE)
 						break;
 				}
 			}
-#endif
-			if (bTurnOffBB)//lzm mod 080826
-			{
 
-			//turn off BB
-			u1bTmp = read_nic_byte(dev, 0x24E);
-			write_nic_byte(dev, 0x24E, (u1bTmp|BIT5|BIT6));
-			//turn off AFE PLL (80M)
-			//write_nic_byte(dev, 0x54, 0xec);
-			//write_nic_word(dev, 0x37C, 0x00ec);
-			write_nic_byte(dev, 0x54, 0xFC); //[ECS] FC-> EC->FC, asked by SD3 Stevenl
-			write_nic_word(dev, 0x37C, 0x00FC); //[ECS] FC-> EC->FC, asked by SD3 Stevenl
-			}
+			if (bTurnOffBB) {
+				/* turn off BB */
+				u1bTmp = read_nic_byte(dev, 0x24E);
+				write_nic_byte(dev, 0x24E, (u1bTmp | BIT5 | BIT6));
 
+				/* turn off AFE PLL (80M) */
+				write_nic_byte(dev, 0x54, 0xFC);
+				write_nic_word(dev, 0x37C, 0x00FC);
+			}
 			break;
-
 		default:
 			bResult = false;
 			printk("SetZebraRFPowerState8185(): unknow state to set: 0x%X!!!\n", eRFPowerState);
@@ -1388,38 +1064,26 @@ SetZebraRFPowerState8185(
 		break;
 	}
 
-	// disable PARM_En in Config3
 	btConfig3 &= ~(CONFIG3_PARM_En);
 	write_nic_byte(dev, CONFIG3, btConfig3);
-	// disable EEM0 and EEM1 in 9346CR
+
 	btCR9346 &= ~(0xC0);
 	write_nic_byte(dev, CR9346, btCR9346);
 
-	if(bResult && bActionAllowed)//lzm mod 080826
-	{
-		// Update current RF state variable.
+	if (bResult && bActionAllowed)
 		priv->eRFPowerState = eRFPowerState;
-	}
 
 	priv->SetRFPowerStateInProgress = false;
 
-	return (bResult && bActionAllowed) ;
+	return bResult && bActionAllowed;
 }
+
 void rtl8225z4_rf_sleep(struct net_device *dev)
 {
-	//
-	// Turn off RF power.
-	//
-	//printk("=========>%s()\n", __func__);
 	MgntActSet_RF_State(dev, eRfSleep, RF_CHANGE_BY_PS);
-	//mdelay(2);	//FIXME
 }
+
 void rtl8225z4_rf_wakeup(struct net_device *dev)
 {
-	//
-	// Turn on RF power.
-	//
-	//printk("=========>%s()\n", __func__);
 	MgntActSet_RF_State(dev, eRfOn, RF_CHANGE_BY_PS);
 }
-