summaryrefslogtreecommitdiffstats
path: root/drivers/serial
diff options
context:
space:
mode:
authorGraf Yang <graf.yang@analog.com>2009-01-02 13:40:22 +0000
committerLinus Torvalds <torvalds@linux-foundation.org>2009-01-02 10:19:34 -0800
commit80d5c474b87da88eca8e1ab034e26daa9f688130 (patch)
treeadb114b756b95541cefaba89cff38180a074003b /drivers/serial
parent52e15f0eae193a8e4ca31c1520179b8d65c79811 (diff)
downloadtalos-op-linux-80d5c474b87da88eca8e1ab034e26daa9f688130.tar.gz
talos-op-linux-80d5c474b87da88eca8e1ab034e26daa9f688130.zip
Blackfin Serial Driver: fix bug - SIR driver stop receiving randomly
Bug description: The IRDA receiver may can't receiving any more after processed some signals. To duplicate this issue is put three IRDA devices together, one blackfin, two none blackfin, they will detect each other. Let one none blackfin devices irdaping the blackfin devices, when it stopped print out ping information, it is the time that blackfin stoped receiving, the time is random. The related register bit is OK, the other devices is sending data continuously. But no interrupt come. Fixing: I tried Michael's suggestion that request the UARTx error interrupt, and reset the IRDA when found FE error. This method helps much, but it can't completely avoid stop. Reset the IRDA before every time sending the data is more safe. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Diffstat (limited to 'drivers/serial')
-rw-r--r--drivers/serial/bfin_5xx.c24
1 files changed, 24 insertions, 0 deletions
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index d63fad7363b7..59a221f9ee9c 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -73,6 +73,8 @@ static void bfin_serial_tx_chars(struct bfin_serial_port *uart);
static void bfin_serial_mctrl_check(struct bfin_serial_port *uart);
+static void bfin_serial_reset_irda(struct uart_port *port);
+
/*
* interrupts are disabled on entry
*/
@@ -105,6 +107,14 @@ static void bfin_serial_stop_tx(struct uart_port *port)
static void bfin_serial_start_tx(struct uart_port *port)
{
struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
+ struct tty_struct *tty = uart->port.info->port.tty;
+
+ /*
+ * To avoid losting RX interrupt, we reset IR function
+ * before sending data.
+ */
+ if (tty->termios->c_line == N_IRDA)
+ bfin_serial_reset_irda(port);
#ifdef CONFIG_SERIAL_BFIN_DMA
if (uart->tx_done)
@@ -890,6 +900,20 @@ static int bfin_kgdboc_port_startup(struct uart_port *port)
}
#endif
+static void bfin_serial_reset_irda(struct uart_port *port)
+{
+ int line = port->line;
+ unsigned short val;
+
+ val = UART_GET_GCTL(&bfin_serial_ports[line]);
+ val &= ~(IREN | RPOLC);
+ UART_PUT_GCTL(&bfin_serial_ports[line], val);
+ SSYNC();
+ val |= (IREN | RPOLC);
+ UART_PUT_GCTL(&bfin_serial_ports[line], val);
+ SSYNC();
+}
+
static struct uart_ops bfin_serial_pops = {
.tx_empty = bfin_serial_tx_empty,
.set_mctrl = bfin_serial_set_mctrl,
OpenPOWER on IntegriCloud