Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (276 commits)
  [SCSI] zfcp: Trigger logging in the FCP channel on qdio error conditions
  [SCSI] zfcp: Introduce experimental support for DIF/DIX
  [SCSI] zfcp: Enable data division support for FCP devices
  [SCSI] zfcp: Prevent access on uninitialized memory.
  [SCSI] zfcp: Post events through FC transport class
  [SCSI] zfcp: Cleanup QDIO attachment and improve processing.
  [SCSI] zfcp: Cleanup function parameters for sbal value.
  [SCSI] zfcp: Use correct width for timer_interval field
  [SCSI] zfcp: Remove SCSI device when removing unit
  [SCSI] zfcp: Use memdup_user and kstrdup
  [SCSI] zfcp: Fix retry after failed "open port" erp action
  [SCSI] zfcp: Fail erp after timeout
  [SCSI] zfcp: Use forced_reopen in terminate_rport_io callback
  [SCSI] zfcp: Register SCSI devices after successful fc_remote_port_add
  [SCSI] zfcp: Do not try "forced close" when port is already closed
  [SCSI] zfcp: Do not unblock rport from REOPEN_PORT_FORCED
  [SCSI] sd: add support for runtime PM
  [SCSI] implement runtime Power Management
  [SCSI] convert to the new PM framework
  [SCSI] Unify SAM_ and SAM_STAT_ macros
  ...

1 files changed, 38 insertions, 5 deletions

diff --git a/drivers/scsi/qla2xxx/qla_nx.h b/drivers/scsi/qla2xxx/qla_nx.h
index f8f99a5ea532..569232b45502 100644
--- a/drivers/scsi/qla2xxx/qla_nx.h
+++ b/drivers/scsi/qla2xxx/qla_nx.h
@@ -1,6 +1,6 @@
 /*
  * QLogic Fibre Channel HBA Driver
- * Copyright (c)  2003-2008 QLogic Corporation
+ * Copyright (c)  2003-2010 QLogic Corporation
  *
  * See LICENSE.qla2xxx for copyright and licensing details.
  */
@@ -538,11 +538,10 @@
 /* Driver Coexistence Defines */
 #define QLA82XX_CRB_DRV_ACTIVE	     (QLA82XX_CAM_RAM(0x138))
 #define QLA82XX_CRB_DEV_STATE	     (QLA82XX_CAM_RAM(0x140))
-#define QLA82XX_CRB_DEV_PART_INFO    (QLA82XX_CAM_RAM(0x14c))
-#define QLA82XX_CRB_DRV_IDC_VERSION  (QLA82XX_CAM_RAM(0x174))
 #define QLA82XX_CRB_DRV_STATE	     (QLA82XX_CAM_RAM(0x144))
 #define QLA82XX_CRB_DRV_SCRATCH      (QLA82XX_CAM_RAM(0x148))
 #define QLA82XX_CRB_DEV_PART_INFO    (QLA82XX_CAM_RAM(0x14c))
+#define QLA82XX_CRB_DRV_IDC_VERSION  (QLA82XX_CAM_RAM(0x174))
 
 /* Every driver should use these Device State */
 #define QLA82XX_DEV_COLD		1
@@ -774,15 +773,49 @@ struct qla82xx_legacy_intr_set {
 		.pci_int_reg	=	ISR_MSI_INT_TRIGGER(7) },	\
 }
 
+#define BRDCFG_START		0x4000
 #define	BOOTLD_START		0x10000
 #define	IMAGE_START		0x100000
 #define FLASH_ADDR_START	0x43000
 
 /* Magic number to let user know flash is programmed */
 #define QLA82XX_BDINFO_MAGIC	0x12345678
+#define QLA82XX_FW_MAGIC_OFFSET	(BRDCFG_START + 0x128)
 #define FW_SIZE_OFFSET		(0x3e840c)
+#define QLA82XX_FW_MIN_SIZE	0x3fffff
+
+/* UNIFIED ROMIMAGE START */
+#define QLA82XX_URI_FW_MIN_SIZE			0xc8000
+#define QLA82XX_URI_DIR_SECT_PRODUCT_TBL	0x0
+#define QLA82XX_URI_DIR_SECT_BOOTLD		0x6
+#define QLA82XX_URI_DIR_SECT_FW			0x7
+
+/* Offsets */
+#define QLA82XX_URI_CHIP_REV_OFF	10
+#define QLA82XX_URI_FLAGS_OFF		11
+#define QLA82XX_URI_BIOS_VERSION_OFF	12
+#define QLA82XX_URI_BOOTLD_IDX_OFF	27
+#define QLA82XX_URI_FIRMWARE_IDX_OFF	29
+
+struct qla82xx_uri_table_desc{
+	uint32_t	findex;
+	uint32_t	num_entries;
+	uint32_t	entry_size;
+	uint32_t	reserved[5];
+};
+
+struct qla82xx_uri_data_desc{
+	uint32_t	findex;
+	uint32_t	size;
+	uint32_t	reserved[5];
+};
+
+/* UNIFIED ROMIMAGE END */
+
+#define QLA82XX_UNIFIED_ROMIMAGE	3
+#define QLA82XX_FLASH_ROMIMAGE		4
+#define QLA82XX_UNKNOWN_ROMIMAGE	0xff
 
-#define QLA82XX_IS_REVISION_P3PLUS(_rev_)	((_rev_) >= 0x50)
 #define MIU_TEST_AGT_WRDATA_UPPER_LO		(0x0b0)
 #define	MIU_TEST_AGT_WRDATA_UPPER_HI		(0x0b4)
 
@@ -853,7 +886,7 @@ struct ct6_dsd {
 	struct list_head dsd_list;
 };
 
-#define MBC_TOGGLE_INTR			0x10
+#define MBC_TOGGLE_INTERRUPT	0x10
 
 /* Flash  offset */
 #define FLT_REG_BOOTLOAD_82XX	0x72