diff options
author | Tony Lindgren <tony@atomide.com> | 2011-11-07 12:27:23 -0800 |
---|---|---|
committer | Tony Lindgren <tony@atomide.com> | 2011-11-07 12:27:23 -0800 |
commit | d30cc16c8e48368e0518f4975a78711e53e14a0f (patch) | |
tree | 26b57f7ab5a963cc3d6c57dff6951bd930875583 /drivers/rapidio | |
parent | 41eb2d813f558900884e240c2f723e36c7bd151f (diff) | |
parent | a1bcc1dcef8451b4291ea2a1b2677cb194102952 (diff) | |
download | talos-op-linux-d30cc16c8e48368e0518f4975a78711e53e14a0f.tar.gz talos-op-linux-d30cc16c8e48368e0518f4975a78711e53e14a0f.zip |
Merge branch 'fixes-modulesplit' into fixes
Diffstat (limited to 'drivers/rapidio')
-rw-r--r-- | drivers/rapidio/Kconfig | 6 | ||||
-rw-r--r-- | drivers/rapidio/Makefile | 1 | ||||
-rw-r--r-- | drivers/rapidio/devices/Kconfig | 10 | ||||
-rw-r--r-- | drivers/rapidio/devices/Makefile | 5 | ||||
-rw-r--r-- | drivers/rapidio/devices/tsi721.c | 2360 | ||||
-rw-r--r-- | drivers/rapidio/devices/tsi721.h | 766 | ||||
-rw-r--r-- | drivers/rapidio/rio-scan.c | 6 | ||||
-rw-r--r-- | drivers/rapidio/switches/idt_gen2.c | 1 |
8 files changed, 3150 insertions, 5 deletions
diff --git a/drivers/rapidio/Kconfig b/drivers/rapidio/Kconfig index 070211a5955c..bc8719238793 100644 --- a/drivers/rapidio/Kconfig +++ b/drivers/rapidio/Kconfig @@ -1,6 +1,8 @@ # # RapidIO configuration # +source "drivers/rapidio/devices/Kconfig" + config RAPIDIO_DISC_TIMEOUT int "Discovery timeout duration (seconds)" depends on RAPIDIO @@ -20,8 +22,6 @@ config RAPIDIO_ENABLE_RX_TX_PORTS ports for Input/Output direction to allow other traffic than Maintenance transfers. -source "drivers/rapidio/switches/Kconfig" - config RAPIDIO_DEBUG bool "RapidIO subsystem debug messages" depends on RAPIDIO @@ -32,3 +32,5 @@ config RAPIDIO_DEBUG going on. If you are unsure about this, say N here. + +source "drivers/rapidio/switches/Kconfig" diff --git a/drivers/rapidio/Makefile b/drivers/rapidio/Makefile index 89b8eca825b5..ec3fb8121004 100644 --- a/drivers/rapidio/Makefile +++ b/drivers/rapidio/Makefile @@ -4,5 +4,6 @@ obj-y += rio.o rio-access.o rio-driver.o rio-scan.o rio-sysfs.o obj-$(CONFIG_RAPIDIO) += switches/ +obj-$(CONFIG_RAPIDIO) += devices/ subdir-ccflags-$(CONFIG_RAPIDIO_DEBUG) := -DDEBUG diff --git a/drivers/rapidio/devices/Kconfig b/drivers/rapidio/devices/Kconfig new file mode 100644 index 000000000000..12a9d7f7040b --- /dev/null +++ b/drivers/rapidio/devices/Kconfig @@ -0,0 +1,10 @@ +# +# RapidIO master port configuration +# + +config RAPIDIO_TSI721 + bool "IDT Tsi721 PCI Express SRIO Controller support" + depends on RAPIDIO && PCIEPORTBUS + default "n" + ---help--- + Include support for IDT Tsi721 PCI Express Serial RapidIO controller. diff --git a/drivers/rapidio/devices/Makefile b/drivers/rapidio/devices/Makefile new file mode 100644 index 000000000000..3b7b4e2dff7c --- /dev/null +++ b/drivers/rapidio/devices/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for RapidIO devices +# + +obj-$(CONFIG_RAPIDIO_TSI721) += tsi721.o diff --git a/drivers/rapidio/devices/tsi721.c b/drivers/rapidio/devices/tsi721.c new file mode 100644 index 000000000000..5225930a10cd --- /dev/null +++ b/drivers/rapidio/devices/tsi721.c @@ -0,0 +1,2360 @@ +/* + * RapidIO mport driver for Tsi721 PCIExpress-to-SRIO bridge + * + * Copyright 2011 Integrated Device Technology, Inc. + * Alexandre Bounine <alexandre.bounine@idt.com> + * Chul Kim <chul.kim@idt.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 + * Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#include <linux/io.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/rio.h> +#include <linux/rio_drv.h> +#include <linux/dma-mapping.h> +#include <linux/interrupt.h> +#include <linux/kfifo.h> +#include <linux/delay.h> + +#include "tsi721.h" + +#define DEBUG_PW /* Inbound Port-Write debugging */ + +static void tsi721_omsg_handler(struct tsi721_device *priv, int ch); +static void tsi721_imsg_handler(struct tsi721_device *priv, int ch); + +/** + * tsi721_lcread - read from local SREP config space + * @mport: RapidIO master port info + * @index: ID of RapdiIO interface + * @offset: Offset into configuration space + * @len: Length (in bytes) of the maintenance transaction + * @data: Value to be read into + * + * Generates a local SREP space read. Returns %0 on + * success or %-EINVAL on failure. + */ +static int tsi721_lcread(struct rio_mport *mport, int index, u32 offset, + int len, u32 *data) +{ + struct tsi721_device *priv = mport->priv; + + if (len != sizeof(u32)) + return -EINVAL; /* only 32-bit access is supported */ + + *data = ioread32(priv->regs + offset); + + return 0; +} + +/** + * tsi721_lcwrite - write into local SREP config space + * @mport: RapidIO master port info + * @index: ID of RapdiIO interface + * @offset: Offset into configuration space + * @len: Length (in bytes) of the maintenance transaction + * @data: Value to be written + * + * Generates a local write into SREP configuration space. Returns %0 on + * success or %-EINVAL on failure. + */ +static int tsi721_lcwrite(struct rio_mport *mport, int index, u32 offset, + int len, u32 data) +{ + struct tsi721_device *priv = mport->priv; + + if (len != sizeof(u32)) + return -EINVAL; /* only 32-bit access is supported */ + + iowrite32(data, priv->regs + offset); + + return 0; +} + +/** + * tsi721_maint_dma - Helper function to generate RapidIO maintenance + * transactions using designated Tsi721 DMA channel. + * @priv: pointer to tsi721 private data + * @sys_size: RapdiIO transport system size + * @destid: Destination ID of transaction + * @hopcount: Number of hops to target device + * @offset: Offset into configuration space + * @len: Length (in bytes) of the maintenance transaction + * @data: Location to be read from or write into + * @do_wr: Operation flag (1 == MAINT_WR) + * + * Generates a RapidIO maintenance transaction (Read or Write). + * Returns %0 on success and %-EINVAL or %-EFAULT on failure. + */ +static int tsi721_maint_dma(struct tsi721_device *priv, u32 sys_size, + u16 destid, u8 hopcount, u32 offset, int len, + u32 *data, int do_wr) +{ + struct tsi721_dma_desc *bd_ptr; + u32 rd_count, swr_ptr, ch_stat; + int i, err = 0; + u32 op = do_wr ? MAINT_WR : MAINT_RD; + + if (offset > (RIO_MAINT_SPACE_SZ - len) || (len != sizeof(u32))) + return -EINVAL; + + bd_ptr = priv->bdma[TSI721_DMACH_MAINT].bd_base; + + rd_count = ioread32( + priv->regs + TSI721_DMAC_DRDCNT(TSI721_DMACH_MAINT)); + + /* Initialize DMA descriptor */ + bd_ptr[0].type_id = cpu_to_le32((DTYPE2 << 29) | (op << 19) | destid); + bd_ptr[0].bcount = cpu_to_le32((sys_size << 26) | 0x04); + bd_ptr[0].raddr_lo = cpu_to_le32((hopcount << 24) | offset); + bd_ptr[0].raddr_hi = 0; + if (do_wr) + bd_ptr[0].data[0] = cpu_to_be32p(data); + else + bd_ptr[0].data[0] = 0xffffffff; + + mb(); + + /* Start DMA operation */ + iowrite32(rd_count + 2, + priv->regs + TSI721_DMAC_DWRCNT(TSI721_DMACH_MAINT)); + ioread32(priv->regs + TSI721_DMAC_DWRCNT(TSI721_DMACH_MAINT)); + i = 0; + + /* Wait until DMA transfer is finished */ + while ((ch_stat = ioread32(priv->regs + + TSI721_DMAC_STS(TSI721_DMACH_MAINT))) & TSI721_DMAC_STS_RUN) { + udelay(1); + if (++i >= 5000000) { + dev_dbg(&priv->pdev->dev, + "%s : DMA[%d] read timeout ch_status=%x\n", + __func__, TSI721_DMACH_MAINT, ch_stat); + if (!do_wr) + *data = 0xffffffff; + err = -EIO; + goto err_out; + } + } + + if (ch_stat & TSI721_DMAC_STS_ABORT) { + /* If DMA operation aborted due to error, + * reinitialize DMA channel + */ + dev_dbg(&priv->pdev->dev, "%s : DMA ABORT ch_stat=%x\n", + __func__, ch_stat); + dev_dbg(&priv->pdev->dev, "OP=%d : destid=%x hc=%x off=%x\n", + do_wr ? MAINT_WR : MAINT_RD, destid, hopcount, offset); + iowrite32(TSI721_DMAC_INT_ALL, + priv->regs + TSI721_DMAC_INT(TSI721_DMACH_MAINT)); + iowrite32(TSI721_DMAC_CTL_INIT, + priv->regs + TSI721_DMAC_CTL(TSI721_DMACH_MAINT)); + udelay(10); + iowrite32(0, priv->regs + + TSI721_DMAC_DWRCNT(TSI721_DMACH_MAINT)); + udelay(1); + if (!do_wr) + *data = 0xffffffff; + err = -EIO; + goto err_out; + } + + if (!do_wr) + *data = be32_to_cpu(bd_ptr[0].data[0]); + + /* + * Update descriptor status FIFO RD pointer. + * NOTE: Skipping check and clear FIFO entries because we are waiting + * for transfer to be completed. + */ + swr_ptr = ioread32(priv->regs + TSI721_DMAC_DSWP(TSI721_DMACH_MAINT)); + iowrite32(swr_ptr, priv->regs + TSI721_DMAC_DSRP(TSI721_DMACH_MAINT)); +err_out: + + return err; +} + +/** + * tsi721_cread_dma - Generate a RapidIO maintenance read transaction + * using Tsi721 BDMA engine. + * @mport: RapidIO master port control structure + * @index: ID of RapdiIO interface + * @destid: Destination ID of transaction + * @hopcount: Number of hops to target device + * @offset: Offset into configuration space + * @len: Length (in bytes) of the maintenance transaction + * @val: Location to be read into + * + * Generates a RapidIO maintenance read transaction. + * Returns %0 on success and %-EINVAL or %-EFAULT on failure. + */ +static int tsi721_cread_dma(struct rio_mport *mport, int index, u16 destid, + u8 hopcount, u32 offset, int len, u32 *data) +{ + struct tsi721_device *priv = mport->priv; + + return tsi721_maint_dma(priv, mport->sys_size, destid, hopcount, + offset, len, data, 0); +} + +/** + * tsi721_cwrite_dma - Generate a RapidIO maintenance write transaction + * using Tsi721 BDMA engine + * @mport: RapidIO master port control structure + * @index: ID of RapdiIO interface + * @destid: Destination ID of transaction + * @hopcount: Number of hops to target device + * @offset: Offset into configuration space + * @len: Length (in bytes) of the maintenance transaction + * @val: Value to be written + * + * Generates a RapidIO maintenance write transaction. + * Returns %0 on success and %-EINVAL or %-EFAULT on failure. + */ +static int tsi721_cwrite_dma(struct rio_mport *mport, int index, u16 destid, + u8 hopcount, u32 offset, int len, u32 data) +{ + struct tsi721_device *priv = mport->priv; + u32 temp = data; + + return tsi721_maint_dma(priv, mport->sys_size, destid, hopcount, + offset, len, &temp, 1); +} + +/** + * tsi721_pw_handler - Tsi721 inbound port-write interrupt handler + * @mport: RapidIO master port structure + * + * Handles inbound port-write interrupts. Copies PW message from an internal + * buffer into PW message FIFO and schedules deferred routine to process + * queued messages. + */ +static int +tsi721_pw_handler(struct rio_mport *mport) +{ + struct tsi721_device *priv = mport->priv; + u32 pw_stat; + u32 pw_buf[TSI721_RIO_PW_MSG_SIZE/sizeof(u32)]; + + + pw_stat = ioread32(priv->regs + TSI721_RIO_PW_RX_STAT); + + if (pw_stat & TSI721_RIO_PW_RX_STAT_PW_VAL) { + pw_buf[0] = ioread32(priv->regs + TSI721_RIO_PW_RX_CAPT(0)); + pw_buf[1] = ioread32(priv->regs + TSI721_RIO_PW_RX_CAPT(1)); + pw_buf[2] = ioread32(priv->regs + TSI721_RIO_PW_RX_CAPT(2)); + pw_buf[3] = ioread32(priv->regs + TSI721_RIO_PW_RX_CAPT(3)); + + /* Queue PW message (if there is room in FIFO), + * otherwise discard it. + */ + spin_lock(&priv->pw_fifo_lock); + if (kfifo_avail(&priv->pw_fifo) >= TSI721_RIO_PW_MSG_SIZE) + kfifo_in(&priv->pw_fifo, pw_buf, + TSI721_RIO_PW_MSG_SIZE); + else + priv->pw_discard_count++; + spin_unlock(&priv->pw_fifo_lock); + } + + /* Clear pending PW interrupts */ + iowrite32(TSI721_RIO_PW_RX_STAT_PW_DISC | TSI721_RIO_PW_RX_STAT_PW_VAL, + priv->regs + TSI721_RIO_PW_RX_STAT); + + schedule_work(&priv->pw_work); + + return 0; +} + +static void tsi721_pw_dpc(struct work_struct *work) +{ + struct tsi721_device *priv = container_of(work, struct tsi721_device, + pw_work); + u32 msg_buffer[RIO_PW_MSG_SIZE/sizeof(u32)]; /* Use full size PW message + buffer for RIO layer */ + + /* + * Process port-write messages + */ + while (kfifo_out_spinlocked(&priv->pw_fifo, (unsigned char *)msg_buffer, + TSI721_RIO_PW_MSG_SIZE, &priv->pw_fifo_lock)) { + /* Process one message */ +#ifdef DEBUG_PW + { + u32 i; + pr_debug("%s : Port-Write Message:", __func__); + for (i = 0; i < RIO_PW_MSG_SIZE/sizeof(u32); ) { + pr_debug("0x%02x: %08x %08x %08x %08x", i*4, + msg_buffer[i], msg_buffer[i + 1], + msg_buffer[i + 2], msg_buffer[i + 3]); + i += 4; + } + pr_debug("\n"); + } +#endif + /* Pass the port-write message to RIO core for processing */ + rio_inb_pwrite_handler((union rio_pw_msg *)msg_buffer); + } +} + +/** + * tsi721_pw_enable - enable/disable port-write interface init + * @mport: Master port implementing the port write unit + * @enable: 1=enable; 0=disable port-write message handling + */ +static int tsi721_pw_enable(struct rio_mport *mport, int enable) +{ + struct tsi721_device *priv = mport->priv; + u32 rval; + + rval = ioread32(priv->regs + TSI721_RIO_EM_INT_ENABLE); + + if (enable) + rval |= TSI721_RIO_EM_INT_ENABLE_PW_RX; + else + rval &= ~TSI721_RIO_EM_INT_ENABLE_PW_RX; + + /* Clear pending PW interrupts */ + iowrite32(TSI721_RIO_PW_RX_STAT_PW_DISC | TSI721_RIO_PW_RX_STAT_PW_VAL, + priv->regs + TSI721_RIO_PW_RX_STAT); + /* Update enable bits */ + iowrite32(rval, priv->regs + TSI721_RIO_EM_INT_ENABLE); + + return 0; +} + +/** + * tsi721_dsend - Send a RapidIO doorbell + * @mport: RapidIO master port info + * @index: ID of RapidIO interface + * @destid: Destination ID of target device + * @data: 16-bit info field of RapidIO doorbell + * + * Sends a RapidIO doorbell message. Always returns %0. + */ +static int tsi721_dsend(struct rio_mport *mport, int index, + u16 destid, u16 data) +{ + struct tsi721_device *priv = mport->priv; + u32 offset; + + offset = (((mport->sys_size) ? RIO_TT_CODE_16 : RIO_TT_CODE_8) << 18) | + (destid << 2); + + dev_dbg(&priv->pdev->dev, + "Send Doorbell 0x%04x to destID 0x%x\n", data, destid); + iowrite16be(data, priv->odb_base + offset); + + return 0; +} + +/** + * tsi721_dbell_handler - Tsi721 doorbell interrupt handler + * @mport: RapidIO master port structure + * + * Handles inbound doorbell interrupts. Copies doorbell entry from an internal + * buffer into DB message FIFO and schedules deferred routine to process + * queued DBs. + */ +static int +tsi721_dbell_handler(struct rio_mport *mport) +{ + struct tsi721_device *priv = mport->priv; + u32 regval; + + /* Disable IDB interrupts */ + regval = ioread32(priv->regs + TSI721_SR_CHINTE(IDB_QUEUE)); + regval &= ~TSI721_SR_CHINT_IDBQRCV; + iowrite32(regval, + priv->regs + TSI721_SR_CHINTE(IDB_QUEUE)); + + schedule_work(&priv->idb_work); + + return 0; +} + +static void tsi721_db_dpc(struct work_struct *work) +{ + struct tsi721_device *priv = container_of(work, struct tsi721_device, + idb_work); + struct rio_mport *mport; + struct rio_dbell *dbell; + int found = 0; + u32 wr_ptr, rd_ptr; + u64 *idb_entry; + u32 regval; + union { + u64 msg; + u8 bytes[8]; + } idb; + + /* + * Process queued inbound doorbells + */ + mport = priv->mport; + + wr_ptr = ioread32(priv->regs + TSI721_IDQ_WP(IDB_QUEUE)); + rd_ptr = ioread32(priv->regs + TSI721_IDQ_RP(IDB_QUEUE)); + + while (wr_ptr != rd_ptr) { + idb_entry = (u64 *)(priv->idb_base + + (TSI721_IDB_ENTRY_SIZE * rd_ptr)); + rd_ptr++; + idb.msg = *idb_entry; + *idb_entry = 0; + + /* Process one doorbell */ + list_for_each_entry(dbell, &mport->dbells, node) { + if ((dbell->res->start <= DBELL_INF(idb.bytes)) && + (dbell->res->end >= DBELL_INF(idb.bytes))) { + found = 1; + break; + } + } + + if (found) { + dbell->dinb(mport, dbell->dev_id, DBELL_SID(idb.bytes), + DBELL_TID(idb.bytes), DBELL_INF(idb.bytes)); + } else { + dev_dbg(&priv->pdev->dev, + "spurious inb doorbell, sid %2.2x tid %2.2x" + " info %4.4x\n", DBELL_SID(idb.bytes), + DBELL_TID(idb.bytes), DBELL_INF(idb.bytes)); + } + } + + iowrite32(rd_ptr & (IDB_QSIZE - 1), + priv->regs + TSI721_IDQ_RP(IDB_QUEUE)); + + /* Re-enable IDB interrupts */ + regval = ioread32(priv->regs + TSI721_SR_CHINTE(IDB_QUEUE)); + regval |= TSI721_SR_CHINT_IDBQRCV; + iowrite32(regval, + priv->regs + TSI721_SR_CHINTE(IDB_QUEUE)); +} + +/** + * tsi721_irqhandler - Tsi721 interrupt handler + * @irq: Linux interrupt number + * @ptr: Pointer to interrupt-specific data (mport structure) + * + * Handles Tsi721 interrupts signaled using MSI and INTA. Checks reported + * interrupt events and calls an event-specific handler(s). + */ +static irqreturn_t tsi721_irqhandler(int irq, void *ptr) +{ + struct rio_mport *mport = (struct rio_mport *)ptr; + struct tsi721_device *priv = mport->priv; + u32 dev_int; + u32 dev_ch_int; + u32 intval; + u32 ch_inte; + + dev_int = ioread32(priv->regs + TSI721_DEV_INT); + if (!dev_int) + return IRQ_NONE; + + dev_ch_int = ioread32(priv->regs + TSI721_DEV_CHAN_INT); + + if (dev_int & TSI721_DEV_INT_SR2PC_CH) { + /* Service SR2PC Channel interrupts */ + if (dev_ch_int & TSI721_INT_SR2PC_CHAN(IDB_QUEUE)) { + /* Service Inbound Doorbell interrupt */ + intval = ioread32(priv->regs + + TSI721_SR_CHINT(IDB_QUEUE)); + if (intval & TSI721_SR_CHINT_IDBQRCV) + tsi721_dbell_handler(mport); + else + dev_info(&priv->pdev->dev, + "Unsupported SR_CH_INT %x\n", intval); + + /* Clear interrupts */ + iowrite32(intval, + priv->regs + TSI721_SR_CHINT(IDB_QUEUE)); + ioread32(priv->regs + TSI721_SR_CHINT(IDB_QUEUE)); + } + } + + if (dev_int & TSI721_DEV_INT_SMSG_CH) { + int ch; + + /* + * Service channel interrupts from Messaging Engine + */ + + if (dev_ch_int & TSI721_INT_IMSG_CHAN_M) { /* Inbound Msg */ + /* Disable signaled OB MSG Channel interrupts */ + ch_inte = ioread32(priv->regs + TSI721_DEV_CHAN_INTE); + ch_inte &= ~(dev_ch_int & TSI721_INT_IMSG_CHAN_M); + iowrite32(ch_inte, priv->regs + TSI721_DEV_CHAN_INTE); + + /* + * Process Inbound Message interrupt for each MBOX + */ + for (ch = 4; ch < RIO_MAX_MBOX + 4; ch++) { + if (!(dev_ch_int & TSI721_INT_IMSG_CHAN(ch))) + continue; + tsi721_imsg_handler(priv, ch); + } + } + + if (dev_ch_int & TSI721_INT_OMSG_CHAN_M) { /* Outbound Msg */ + /* Disable signaled OB MSG Channel interrupts */ + ch_inte = ioread32(priv->regs + TSI721_DEV_CHAN_INTE); + ch_inte &= ~(dev_ch_int & TSI721_INT_OMSG_CHAN_M); + iowrite32(ch_inte, priv->regs + TSI721_DEV_CHAN_INTE); + + /* + * Process Outbound Message interrupts for each MBOX + */ + + for (ch = 0; ch < RIO_MAX_MBOX; ch++) { + if (!(dev_ch_int & TSI721_INT_OMSG_CHAN(ch))) + continue; + tsi721_omsg_handler(priv, ch); + } + } + } + + if (dev_int & TSI721_DEV_INT_SRIO) { + /* Service SRIO MAC interrupts */ + intval = ioread32(priv->regs + TSI721_RIO_EM_INT_STAT); + if (intval & TSI721_RIO_EM_INT_STAT_PW_RX) + tsi721_pw_handler(mport); + } + + return IRQ_HANDLED; +} + +static void tsi721_interrupts_init(struct tsi721_device *priv) +{ + u32 intr; + + /* Enable IDB interrupts */ + iowrite32(TSI721_SR_CHINT_ALL, + priv->regs + TSI721_SR_CHINT(IDB_QUEUE)); + iowrite32(TSI721_SR_CHINT_IDBQRCV, + priv->regs + TSI721_SR_CHINTE(IDB_QUEUE)); + iowrite32(TSI721_INT_SR2PC_CHAN(IDB_QUEUE), + priv->regs + TSI721_DEV_CHAN_INTE); + + /* Enable SRIO MAC interrupts */ + iowrite32(TSI721_RIO_EM_DEV_INT_EN_INT, + priv->regs + TSI721_RIO_EM_DEV_INT_EN); + + if (priv->flags & TSI721_USING_MSIX) + intr = TSI721_DEV_INT_SRIO; + else + intr = TSI721_DEV_INT_SR2PC_CH | TSI721_DEV_INT_SRIO | + TSI721_DEV_INT_SMSG_CH; + + iowrite32(intr, priv->regs + TSI721_DEV_INTE); + ioread32(priv->regs + TSI721_DEV_INTE); +} + +#ifdef CONFIG_PCI_MSI +/** + * tsi721_omsg_msix - MSI-X interrupt handler for outbound messaging + * @irq: Linux interrupt number + * @ptr: Pointer to interrupt-specific data (mport structure) + * + * Handles outbound messaging interrupts signaled using MSI-X. + */ +static irqreturn_t tsi721_omsg_msix(int irq, void *ptr) +{ + struct tsi721_device *priv = ((struct rio_mport *)ptr)->priv; + int mbox; + + mbox = (irq - priv->msix[TSI721_VECT_OMB0_DONE].vector) % RIO_MAX_MBOX; + tsi721_omsg_handler(priv, mbox); + return IRQ_HANDLED; +} + +/** + * tsi721_imsg_msix - MSI-X interrupt handler for inbound messaging + * @irq: Linux interrupt number + * @ptr: Pointer to interrupt-specific data (mport structure) + * + * Handles inbound messaging interrupts signaled using MSI-X. + */ +static irqreturn_t tsi721_imsg_msix(int irq, void *ptr) +{ + struct tsi721_device *priv = ((struct rio_mport *)ptr)->priv; + int mbox; + + mbox = (irq - priv->msix[TSI721_VECT_IMB0_RCV].vector) % RIO_MAX_MBOX; + tsi721_imsg_handler(priv, mbox + 4); + return IRQ_HANDLED; +} + +/** + * tsi721_srio_msix - Tsi721 MSI-X SRIO MAC interrupt handler + * @irq: Linux interrupt number + * @ptr: Pointer to interrupt-specific data (mport structure) + * + * Handles Tsi721 interrupts from SRIO MAC. + */ +static irqreturn_t tsi721_srio_msix(int irq, void *ptr) +{ + struct tsi721_device *priv = ((struct rio_mport *)ptr)->priv; + u32 srio_int; + + /* Service SRIO MAC interrupts */ + srio_int = ioread32(priv->regs + TSI721_RIO_EM_INT_STAT); + if (srio_int & TSI721_RIO_EM_INT_STAT_PW_RX) + tsi721_pw_handler((struct rio_mport *)ptr); + + return IRQ_HANDLED; +} + +/** + * tsi721_sr2pc_ch_msix - Tsi721 MSI-X SR2PC Channel interrupt handler + * @irq: Linux interrupt number + * @ptr: Pointer to interrupt-specific data (mport structure) + * + * Handles Tsi721 interrupts from SR2PC Channel. + * NOTE: At this moment services only one SR2PC channel associated with inbound + * doorbells. + */ +static irqreturn_t tsi721_sr2pc_ch_msix(int irq, void *ptr) +{ + struct tsi721_device *priv = ((struct rio_mport *)ptr)->priv; + u32 sr_ch_int; + + /* Service Inbound DB interrupt from SR2PC channel */ + sr_ch_int = ioread32(priv->regs + TSI721_SR_CHINT(IDB_QUEUE)); + if (sr_ch_int & TSI721_SR_CHINT_IDBQRCV) + tsi721_dbell_handler((struct rio_mport *)ptr); + + /* Clear interrupts */ + iowrite32(sr_ch_int, priv->regs + TSI721_SR_CHINT(IDB_QUEUE)); + /* Read back to ensure that interrupt was cleared */ + sr_ch_int = ioread32(priv->regs + TSI721_SR_CHINT(IDB_QUEUE)); + + return IRQ_HANDLED; +} + +/** + * tsi721_request_msix - register interrupt service for MSI-X mode. + * @mport: RapidIO master port structure + * + * Registers MSI-X interrupt service routines for interrupts that are active + * immediately after mport initialization. Messaging interrupt service routines + * should be registered during corresponding open requests. + */ +static int tsi721_request_msix(struct rio_mport *mport) +{ + struct tsi721_device *priv = mport->priv; + int err = 0; + + err = request_irq(priv->msix[TSI721_VECT_IDB].vector, + tsi721_sr2pc_ch_msix, 0, + priv->msix[TSI721_VECT_IDB].irq_name, (void *)mport); + if (err) + goto out; + + err = request_irq(priv->msix[TSI721_VECT_PWRX].vector, + tsi721_srio_msix, 0, + priv->msix[TSI721_VECT_PWRX].irq_name, (void *)mport); + if (err) + free_irq( + priv->msix[TSI721_VECT_IDB].vector, + (void *)mport); +out: + return err; +} + +/** + * tsi721_enable_msix - Attempts to enable MSI-X support for Tsi721. + * @priv: pointer to tsi721 private data + * + * Configures MSI-X support for Tsi721. Supports only an exact number + * of requested vectors. + */ +static int tsi721_enable_msix(struct tsi721_device *priv) +{ + struct msix_entry entries[TSI721_VECT_MAX]; + int err; + int i; + + entries[TSI721_VECT_IDB].entry = TSI721_MSIX_SR2PC_IDBQ_RCV(IDB_QUEUE); + entries[TSI721_VECT_PWRX].entry = TSI721_MSIX_SRIO_MAC_INT; + + /* + * Initialize MSI-X entries for Messaging Engine: + * this driver supports four RIO mailboxes (inbound and outbound) + * NOTE: Inbound message MBOX 0...4 use IB channels 4...7. Therefore + * offset +4 is added to IB MBOX number. + */ + for (i = 0; i < RIO_MAX_MBOX; i++) { + entries[TSI721_VECT_IMB0_RCV + i].entry = + TSI721_MSIX_IMSG_DQ_RCV(i + 4); + entries[TSI721_VECT_IMB0_INT + i].entry = + TSI721_MSIX_IMSG_INT(i + 4); + entries[TSI721_VECT_OMB0_DONE + i].entry = + TSI721_MSIX_OMSG_DONE(i); + entries[TSI721_VECT_OMB0_INT + i].entry = + TSI721_MSIX_OMSG_INT(i); + } + + err = pci_enable_msix(priv->pdev, entries, ARRAY_SIZE(entries)); + if (err) { + if (err > 0) + dev_info(&priv->pdev->dev, + "Only %d MSI-X vectors available, " + "not using MSI-X\n", err); + return err; + } + + /* + * Copy MSI-X vector information into tsi721 private structure + */ + priv->msix[TSI721_VECT_IDB].vector = entries[TSI721_VECT_IDB].vector; + snprintf(priv->msix[TSI721_VECT_IDB].irq_name, IRQ_DEVICE_NAME_MAX, + DRV_NAME "-idb@pci:%s", pci_name(priv->pdev)); + priv->msix[TSI721_VECT_PWRX].vector = entries[TSI721_VECT_PWRX].vector; + snprintf(priv->msix[TSI721_VECT_PWRX].irq_name, IRQ_DEVICE_NAME_MAX, + DRV_NAME "-pwrx@pci:%s", pci_name(priv->pdev)); + + for (i = 0; i < RIO_MAX_MBOX; i++) { + priv->msix[TSI721_VECT_IMB0_RCV + i].vector = + entries[TSI721_VECT_IMB0_RCV + i].vector; + snprintf(priv->msix[TSI721_VECT_IMB0_RCV + i].irq_name, + IRQ_DEVICE_NAME_MAX, DRV_NAME "-imbr%d@pci:%s", + i, pci_name(priv->pdev)); + + priv->msix[TSI721_VECT_IMB0_INT + i].vector = + entries[TSI721_VECT_IMB0_INT + i].vector; + snprintf(priv->msix[TSI721_VECT_IMB0_INT + i].irq_name, + IRQ_DEVICE_NAME_MAX, DRV_NAME "-imbi%d@pci:%s", + i, pci_name(priv->pdev)); + + priv->msix[TSI721_VECT_OMB0_DONE + i].vector = + entries[TSI721_VECT_OMB0_DONE + i].vector; + snprintf(priv->msix[TSI721_VECT_OMB0_DONE + i].irq_name, + IRQ_DEVICE_NAME_MAX, DRV_NAME "-ombd%d@pci:%s", + i, pci_name(priv->pdev)); + + priv->msix[TSI721_VECT_OMB0_INT + i].vector = + entries[TSI721_VECT_OMB0_INT + i].vector; + snprintf(priv->msix[TSI721_VECT_OMB0_INT + i].irq_name, + IRQ_DEVICE_NAME_MAX, DRV_NAME "-ombi%d@pci:%s", + i, pci_name(priv->pdev)); + } + + return 0; +} +#endif /* CONFIG_PCI_MSI */ + +static int tsi721_request_irq(struct rio_mport *mport) +{ + struct tsi721_device *priv = mport->priv; + int err; + +#ifdef CONFIG_PCI_MSI + if (priv->flags & TSI721_USING_MSIX) + err = tsi721_request_msix(mport); + else +#endif + err = request_irq(priv->pdev->irq, tsi721_irqhandler, + (priv->flags & TSI721_USING_MSI) ? 0 : IRQF_SHARED, + DRV_NAME, (void *)mport); + + if (err) + dev_err(&priv->pdev->dev, + "Unable to allocate interrupt, Error: %d\n", err); + + return err; +} + +/** + * tsi721_init_pc2sr_mapping - initializes outbound (PCIe->SRIO) + * translation regions. + * @priv: pointer to tsi721 private data + * + * Disables SREP translation regions. + */ +static void tsi721_init_pc2sr_mapping(struct tsi721_device *priv) +{ + int i; + + /* Disable all PC2SR translation windows */ + for (i = 0; i < TSI721_OBWIN_NUM; i++) + iowrite32(0, priv->regs + TSI721_OBWINLB(i)); +} + +/** + * tsi721_init_sr2pc_mapping - initializes inbound (SRIO->PCIe) + * translation regions. + * @priv: pointer to tsi721 private data + * + * Disables inbound windows. + */ +static void tsi721_init_sr2pc_mapping(struct tsi721_device *priv) +{ + int i; + + /* Disable all SR2PC inbound windows */ + for (i = 0; i < TSI721_IBWIN_NUM; i++) + iowrite32(0, priv->regs + TSI721_IBWINLB(i)); +} + +/** + * tsi721_port_write_init - Inbound port write interface init + * @priv: pointer to tsi721 private data + * + * Initializes inbound port write handler. + * Returns %0 on success or %-ENOMEM on failure. + */ +static int tsi721_port_write_init(struct tsi721_device *priv) +{ + priv->pw_discard_count = 0; + INIT_WORK(&priv->pw_work, tsi721_pw_dpc); + spin_lock_init(&priv->pw_fifo_lock); + if (kfifo_alloc(&priv->pw_fifo, + TSI721_RIO_PW_MSG_SIZE * 32, GFP_KERNEL)) { + dev_err(&priv->pdev->dev, "PW FIFO allocation failed\n"); + return -ENOMEM; + } + + /* Use reliable port-write capture mode */ + iowrite32(TSI721_RIO_PW_CTL_PWC_REL, priv->regs + TSI721_RIO_PW_CTL); + return 0; +} + +static int tsi721_doorbell_init(struct tsi721_device *priv) +{ + /* Outbound Doorbells do not require any setup. + * Tsi721 uses dedicated PCI BAR1 to generate doorbells. + * That BAR1 was mapped during the probe routine. + */ + + /* Initialize Inbound Doorbell processing DPC and queue */ + priv->db_discard_count = 0; + INIT_WORK(&priv->idb_work, tsi721_db_dpc); + + /* Allocate buffer for inbound doorbells queue */ + priv->idb_base = dma_alloc_coherent(&priv->pdev->dev, + IDB_QSIZE * TSI721_IDB_ENTRY_SIZE, + &priv->idb_dma, GFP_KERNEL); + if (!priv->idb_base) + return -ENOMEM; + + memset(priv->idb_base, 0, IDB_QSIZE * TSI721_IDB_ENTRY_SIZE); + + dev_dbg(&priv->pdev->dev, "Allocated IDB buffer @ %p (phys = %llx)\n", + priv->idb_base, (unsigned long long)priv->idb_dma); + + iowrite32(TSI721_IDQ_SIZE_VAL(IDB_QSIZE), + priv->regs + TSI721_IDQ_SIZE(IDB_QUEUE)); + iowrite32(((u64)priv->idb_dma >> 32), + priv->regs + TSI721_IDQ_BASEU(IDB_QUEUE)); + iowrite32(((u64)priv->idb_dma & TSI721_IDQ_BASEL_ADDR), + priv->regs + TSI721_IDQ_BASEL(IDB_QUEUE)); + /* Enable accepting all inbound doorbells */ + iowrite32(0, priv->regs + TSI721_IDQ_MASK(IDB_QUEUE)); + + iowrite32(TSI721_IDQ_INIT, priv->regs + TSI721_IDQ_CTL(IDB_QUEUE)); + + iowrite32(0, priv->regs + TSI721_IDQ_RP(IDB_QUEUE)); + + return 0; +} + +static void tsi721_doorbell_free(struct tsi721_device *priv) +{ + if (priv->idb_base == NULL) + return; + + /* Free buffer allocated for inbound doorbell queue */ + dma_free_coherent(&priv->pdev->dev, IDB_QSIZE * TSI721_IDB_ENTRY_SIZE, + priv->idb_base, priv->idb_dma); + priv->idb_base = NULL; +} + +static int tsi721_bdma_ch_init(struct tsi721_device *priv, int chnum) +{ + struct tsi721_dma_desc *bd_ptr; + u64 *sts_ptr; + dma_addr_t bd_phys, sts_phys; + int sts_size; + int bd_num = priv->bdma[chnum].bd_num; + + dev_dbg(&priv->pdev->dev, "Init Block DMA Engine, CH%d\n", chnum); + + /* + * Initialize DMA channel for maintenance requests + */ + + /* Allocate space for DMA descriptors */ + bd_ptr = dma_alloc_coherent(&priv->pdev->dev, + bd_num * sizeof(struct tsi721_dma_desc), + &bd_phys, GFP_KERNEL); + if (!bd_ptr) + return -ENOMEM; + + priv->bdma[chnum].bd_phys = bd_phys; + priv->bdma[chnum].bd_base = bd_ptr; + + memset(bd_ptr, 0, bd_num * sizeof(struct tsi721_dma_desc)); + + dev_dbg(&priv->pdev->dev, "DMA descriptors @ %p (phys = %llx)\n", + bd_ptr, (unsigned long long)bd_phys); + + /* Allocate space for descriptor status FIFO */ + sts_size = (bd_num >= TSI721_DMA_MINSTSSZ) ? + bd_num : TSI721_DMA_MINSTSSZ; + sts_size = roundup_pow_of_two(sts_size); + sts_ptr = dma_alloc_coherent(&priv->pdev->dev, + sts_size * sizeof(struct tsi721_dma_sts), + &sts_phys, GFP_KERNEL); + if (!sts_ptr) { + /* Free space allocated for DMA descriptors */ + dma_free_coherent(&priv->pdev->dev, + bd_num * sizeof(struct tsi721_dma_desc), + bd_ptr, bd_phys); + priv->bdma[chnum].bd_base = NULL; + return -ENOMEM; + } + + priv->bdma[chnum].sts_phys = sts_phys; + priv->bdma[chnum].sts_base = sts_ptr; + priv->bdma[chnum].sts_size = sts_size; + + memset(sts_ptr, 0, sts_size); + + dev_dbg(&priv->pdev->dev, + "desc status FIFO @ %p (phys = %llx) size=0x%x\n", + sts_ptr, (unsigned long long)sts_phys, sts_size); + + /* Initialize DMA descriptors ring */ + bd_ptr[bd_num - 1].type_id = cpu_to_le32(DTYPE3 << 29); + bd_ptr[bd_num - 1].next_lo = cpu_to_le32((u64)bd_phys & + TSI721_DMAC_DPTRL_MASK); + bd_ptr[bd_num - 1].next_hi = cpu_to_le32((u64)bd_phys >> 32); + + /* Setup DMA descriptor pointers */ + iowrite32(((u64)bd_phys >> 32), + priv->regs + TSI721_DMAC_DPTRH(chnum)); + iowrite32(((u64)bd_phys & TSI721_DMAC_DPTRL_MASK), + priv->regs + TSI721_DMAC_DPTRL(chnum)); + + /* Setup descriptor status FIFO */ + iowrite32(((u64)sts_phys >> 32), + priv->regs + TSI721_DMAC_DSBH(chnum)); + iowrite32(((u64)sts_phys & TSI721_DMAC_DSBL_MASK), + priv->regs + TSI721_DMAC_DSBL(chnum)); + iowrite32(TSI721_DMAC_DSSZ_SIZE(sts_size), + priv->regs + TSI721_DMAC_DSSZ(chnum)); + + /* Clear interrupt bits */ + iowrite32(TSI721_DMAC_INT_ALL, + priv->regs + TSI721_DMAC_INT(chnum)); + + ioread32(priv->regs + TSI721_DMAC_INT(chnum)); + + /* Toggle DMA channel initialization */ + iowrite32(TSI721_DMAC_CTL_INIT, priv->regs + TSI721_DMAC_CTL(chnum)); + ioread32(priv->regs + TSI721_DMAC_CTL(chnum)); + udelay(10); + + return 0; +} + +static int tsi721_bdma_ch_free(struct tsi721_device *priv, int chnum) +{ + u32 ch_stat; + + if (priv->bdma[chnum].bd_base == NULL) + return 0; + + /* Check if DMA channel still running */ + ch_stat = ioread32(priv->regs + TSI721_DMAC_STS(chnum)); + if (ch_stat & TSI721_DMAC_STS_RUN) + return -EFAULT; + + /* Put DMA channel into init state */ + iowrite32(TSI721_DMAC_CTL_INIT, + priv->regs + TSI721_DMAC_CTL(chnum)); + + /* Free space allocated for DMA descriptors */ + dma_free_coherent(&priv->pdev->dev, + priv->bdma[chnum].bd_num * sizeof(struct tsi721_dma_desc), + priv->bdma[chnum].bd_base, priv->bdma[chnum].bd_phys); + priv->bdma[chnum].bd_base = NULL; + + /* Free space allocated for status FIFO */ + dma_free_coherent(&priv->pdev->dev, + priv->bdma[chnum].sts_size * sizeof(struct tsi721_dma_sts), + priv->bdma[chnum].sts_base, priv->bdma[chnum].sts_phys); + priv->bdma[chnum].sts_base = NULL; + return 0; +} + +static int tsi721_bdma_init(struct tsi721_device *priv) +{ + /* Initialize BDMA channel allocated for RapidIO maintenance read/write + * request generation + */ + priv->bdma[TSI721_DMACH_MAINT].bd_num = 2; + if (tsi721_bdma_ch_init(priv, TSI721_DMACH_MAINT)) { + dev_err(&priv->pdev->dev, "Unable to initialize maintenance DMA" + " channel %d, aborting\n", TSI721_DMACH_MAINT); + return -ENOMEM; + } + + return 0; +} + +static void tsi721_bdma_free(struct tsi721_device *priv) +{ + tsi721_bdma_ch_free(priv, TSI721_DMACH_MAINT); +} + +/* Enable Inbound Messaging Interrupts */ +static void +tsi721_imsg_interrupt_enable(struct tsi721_device *priv, int ch, + u32 inte_mask) +{ + u32 rval; + + if (!inte_mask) + return; + + /* Clear pending Inbound Messaging interrupts */ + iowrite32(inte_mask, priv->regs + TSI721_IBDMAC_INT(ch)); + + /* Enable Inbound Messaging interrupts */ + rval = ioread32(priv->regs + TSI721_IBDMAC_INTE(ch)); + iowrite32(rval | inte_mask, priv->regs + TSI721_IBDMAC_INTE(ch)); + + if (priv->flags & TSI721_USING_MSIX) + return; /* Finished if we are in MSI-X mode */ + + /* + * For MSI and INTA interrupt signalling we need to enable next levels + */ + + /* Enable Device Channel Interrupt */ + rval = ioread32(priv->regs + TSI721_DEV_CHAN_INTE); + iowrite32(rval | TSI721_INT_IMSG_CHAN(ch), + priv->regs + TSI721_DEV_CHAN_INTE); +} + +/* Disable Inbound Messaging Interrupts */ +static void +tsi721_imsg_interrupt_disable(struct tsi721_device *priv, int ch, + u32 inte_mask) +{ + u32 rval; + + if (!inte_mask) + return; + + /* Clear pending Inbound Messaging interrupts */ + iowrite32(inte_mask, priv->regs + TSI721_IBDMAC_INT(ch)); + + /* Disable Inbound Messaging interrupts */ + rval = ioread32(priv->regs + TSI721_IBDMAC_INTE(ch)); + rval &= ~inte_mask; + iowrite32(rval, priv->regs + TSI721_IBDMAC_INTE(ch)); + + if (priv->flags & TSI721_USING_MSIX) + return; /* Finished if we are in MSI-X mode */ + + /* + * For MSI and INTA interrupt signalling we need to disable next levels + */ + + /* Disable Device Channel Interrupt */ + rval = ioread32(priv->regs + TSI721_DEV_CHAN_INTE); + rval &= ~TSI721_INT_IMSG_CHAN(ch); + iowrite32(rval, priv->regs + TSI721_DEV_CHAN_INTE); +} + +/* Enable Outbound Messaging interrupts */ +static void +tsi721_omsg_interrupt_enable(struct tsi721_device *priv, int ch, + u32 inte_mask) +{ + u32 rval; + + if (!inte_mask) + return; + + /* Clear pending Outbound Messaging interrupts */ + iowrite32(inte_mask, priv->regs + TSI721_OBDMAC_INT(ch)); + + /* Enable Outbound Messaging channel interrupts */ + rval = ioread32(priv->regs + TSI721_OBDMAC_INTE(ch)); + iowrite32(rval | inte_mask, priv->regs + TSI721_OBDMAC_INTE(ch)); + + if (priv->flags & TSI721_USING_MSIX) + return; /* Finished if we are in MSI-X mode */ + + /* + * For MSI and INTA interrupt signalling we need to enable next levels + */ + + /* Enable Device Channel Interrupt */ + rval = ioread32(priv->regs + TSI721_DEV_CHAN_INTE); + iowrite32(rval | TSI721_INT_OMSG_CHAN(ch), + priv->regs + TSI721_DEV_CHAN_INTE); +} + +/* Disable Outbound Messaging interrupts */ +static void +tsi721_omsg_interrupt_disable(struct tsi721_device *priv, int ch, + u32 inte_mask) +{ + u32 rval; + + if (!inte_mask) + return; + + /* Clear pending Outbound Messaging interrupts */ + iowrite32(inte_mask, priv->regs + TSI721_OBDMAC_INT(ch)); + + /* Disable Outbound Messaging interrupts */ + rval = ioread32(priv->regs + TSI721_OBDMAC_INTE(ch)); + rval &= ~inte_mask; + iowrite32(rval, priv->regs + TSI721_OBDMAC_INTE(ch)); + + if (priv->flags & TSI721_USING_MSIX) + return; /* Finished if we are in MSI-X mode */ + + /* + * For MSI and INTA interrupt signalling we need to disable next levels + */ + + /* Disable Device Channel Interrupt */ + rval = ioread32(priv->regs + TSI721_DEV_CHAN_INTE); + rval &= ~TSI721_INT_OMSG_CHAN(ch); + iowrite32(rval, priv->regs + TSI721_DEV_CHAN_INTE); +} + +/** + * tsi721_add_outb_message - Add message to the Tsi721 outbound message queue + * @mport: Master port with outbound message queue + * @rdev: Target of outbound message + * @mbox: Outbound mailbox + * @buffer: Message to add to outbound queue + * @len: Length of message + */ +static int +tsi721_add_outb_message(struct rio_mport *mport, struct rio_dev *rdev, int mbox, + void *buffer, size_t len) +{ + struct tsi721_device *priv = mport->priv; + struct tsi721_omsg_desc *desc; + u32 tx_slot; + + if (!priv->omsg_init[mbox] || + len > TSI721_MSG_MAX_SIZE || len < 8) + return -EINVAL; + + tx_slot = priv->omsg_ring[mbox].tx_slot; + + /* Copy copy message into transfer buffer */ + memcpy(priv->omsg_ring[mbox].omq_base[tx_slot], buffer, len); + + if (len & 0x7) + len += 8; + + /* Build descriptor associated with buffer */ + desc = priv->omsg_ring[mbox].omd_base; + desc[tx_slot].type_id = cpu_to_le32((DTYPE4 << 29) | rdev->destid); + if (tx_slot % 4 == 0) + desc[tx_slot].type_id |= cpu_to_le32(TSI721_OMD_IOF); + + desc[tx_slot].msg_info = + cpu_to_le32((mport->sys_size << 26) | (mbox << 22) | + (0xe << 12) | (len & 0xff8)); + desc[tx_slot].bufptr_lo = + cpu_to_le32((u64)priv->omsg_ring[mbox].omq_phys[tx_slot] & + 0xffffffff); + desc[tx_slot].bufptr_hi = + cpu_to_le32((u64)priv->omsg_ring[mbox].omq_phys[tx_slot] >> 32); + + priv->omsg_ring[mbox].wr_count++; + + /* Go to next descriptor */ + if (++priv->omsg_ring[mbox].tx_slot == priv->omsg_ring[mbox].size) { + priv->omsg_ring[mbox].tx_slot = 0; + /* Move through the ring link descriptor at the end */ + priv->omsg_ring[mbox].wr_count++; + } + + mb(); + + /* Set new write count value */ + iowrite32(priv->omsg_ring[mbox].wr_count, + priv->regs + TSI721_OBDMAC_DWRCNT(mbox)); + ioread32(priv->regs + TSI721_OBDMAC_DWRCNT(mbox)); + + return 0; +} + +/** + * tsi721_omsg_handler - Outbound Message Interrupt Handler + * @priv: pointer to tsi721 private data + * @ch: number of OB MSG channel to service + * + * Services channel interrupts from outbound messaging engine. + */ +static void tsi721_omsg_handler(struct tsi721_device *priv, int ch) +{ + u32 omsg_int; + + spin_lock(&priv->omsg_ring[ch].lock); + + omsg_int = ioread32(priv->regs + TSI721_OBDMAC_INT(ch)); + + if (omsg_int & TSI721_OBDMAC_INT_ST_FULL) + dev_info(&priv->pdev->dev, + "OB MBOX%d: Status FIFO is full\n", ch); + + if (omsg_int & (TSI721_OBDMAC_INT_DONE | TSI721_OBDMAC_INT_IOF_DONE)) { + u32 srd_ptr; + u64 *sts_ptr, last_ptr = 0, prev_ptr = 0; + int i, j; + u32 tx_slot; + + /* + * Find last successfully processed descriptor + */ + + /* Check and clear descriptor status FIFO entries */ + srd_ptr = priv->omsg_ring[ch].sts_rdptr; + sts_ptr = priv->omsg_ring[ch].sts_base; + j = srd_ptr * 8; + while (sts_ptr[j]) { + for (i = 0; i < 8 && sts_ptr[j]; i++, j++) { + prev_ptr = last_ptr; + last_ptr = le64_to_cpu(sts_ptr[j]); + sts_ptr[j] = 0; + } + + ++srd_ptr; + srd_ptr %= priv->omsg_ring[ch].sts_size; + j = srd_ptr * 8; + } + + if (last_ptr == 0) + goto no_sts_update; + + priv->omsg_ring[ch].sts_rdptr = srd_ptr; + iowrite32(srd_ptr, priv->regs + TSI721_OBDMAC_DSRP(ch)); + + if (!priv->mport->outb_msg[ch].mcback) + goto no_sts_update; + + /* Inform upper layer about transfer completion */ + + tx_slot = (last_ptr - (u64)priv->omsg_ring[ch].omd_phys)/ + sizeof(struct tsi721_omsg_desc); + + /* + * Check if this is a Link Descriptor (LD). + * If yes, ignore LD and use descriptor processed + * before LD. + */ + if (tx_slot == priv->omsg_ring[ch].size) { + if (prev_ptr) + tx_slot = (prev_ptr - + (u64)priv->omsg_ring[ch].omd_phys)/ + sizeof(struct tsi721_omsg_desc); + else + goto no_sts_update; + } + + /* Move slot index to the next message to be sent */ + ++tx_slot; + if (tx_slot == priv->omsg_ring[ch].size) + tx_slot = 0; + BUG_ON(tx_slot >= priv->omsg_ring[ch].size); + priv->mport->outb_msg[ch].mcback(priv->mport, + priv->omsg_ring[ch].dev_id, ch, + tx_slot); + } + +no_sts_update: + + if (omsg_int & TSI721_OBDMAC_INT_ERROR) { + /* + * Outbound message operation aborted due to error, + * reinitialize OB MSG channel + */ + + dev_dbg(&priv->pdev->dev, "OB MSG ABORT ch_stat=%x\n", + ioread32(priv->regs + TSI721_OBDMAC_STS(ch))); + + iowrite32(TSI721_OBDMAC_INT_ERROR, + priv->regs + TSI721_OBDMAC_INT(ch)); + iowrite32(TSI721_OBDMAC_CTL_INIT, + priv->regs + TSI721_OBDMAC_CTL(ch)); + ioread32(priv->regs + TSI721_OBDMAC_CTL(ch)); + + /* Inform upper level to clear all pending tx slots */ + if (priv->mport->outb_msg[ch].mcback) + priv->mport->outb_msg[ch].mcback(priv->mport, + priv->omsg_ring[ch].dev_id, ch, + priv->omsg_ring[ch].tx_slot); + /* Synch tx_slot tracking */ + iowrite32(priv->omsg_ring[ch].tx_slot, + priv->regs + TSI721_OBDMAC_DRDCNT(ch)); + ioread32(priv->regs + TSI721_OBDMAC_DRDCNT(ch)); + priv->omsg_ring[ch].wr_count = priv->omsg_ring[ch].tx_slot; + priv->omsg_ring[ch].sts_rdptr = 0; + } + + /* Clear channel interrupts */ + iowrite32(omsg_int, priv->regs + TSI721_OBDMAC_INT(ch)); + + if (!(priv->flags & TSI721_USING_MSIX)) { + u32 ch_inte; + + /* Re-enable channel interrupts */ + ch_inte = ioread32(priv->regs + TSI721_DEV_CHAN_INTE); + ch_inte |= TSI721_INT_OMSG_CHAN(ch); + iowrite32(ch_inte, priv->regs + TSI721_DEV_CHAN_INTE); + } + + spin_unlock(&priv->omsg_ring[ch].lock); +} + +/** + * tsi721_open_outb_mbox - Initialize Tsi721 outbound mailbox + * @mport: Master port implementing Outbound Messaging Engine + * @dev_id: Device specific pointer to pass on event + * @mbox: Mailbox to open + * @entries: Number of entries in the outbound mailbox ring + */ +static int tsi721_open_outb_mbox(struct rio_mport *mport, void *dev_id, + int mbox, int entries) +{ + struct tsi721_device *priv = mport->priv; + struct tsi721_omsg_desc *bd_ptr; + int i, rc = 0; + + if ((entries < TSI721_OMSGD_MIN_RING_SIZE) || + (entries > (TSI721_OMSGD_RING_SIZE)) || + (!is_power_of_2(entries)) || mbox >= RIO_MAX_MBOX) { + rc = -EINVAL; + goto out; + } + + priv->omsg_ring[mbox].dev_id = dev_id; + priv->omsg_ring[mbox].size = entries; + priv->omsg_ring[mbox].sts_rdptr = 0; + spin_lock_init(&priv->omsg_ring[mbox].lock); + + /* Outbound Msg Buffer allocation based on + the number of maximum descriptor entries */ + for (i = 0; i < entries; i++) { + priv->omsg_ring[mbox].omq_base[i] = + dma_alloc_coherent( + &priv->pdev->dev, TSI721_MSG_BUFFER_SIZE, + &priv->omsg_ring[mbox].omq_phys[i], + GFP_KERNEL); + if (priv->omsg_ring[mbox].omq_base[i] == NULL) { + dev_dbg(&priv->pdev->dev, + "Unable to allocate OB MSG data buffer for" + " MBOX%d\n", mbox); + rc = -ENOMEM; + goto out_buf; + } + } + + /* Outbound message descriptor allocation */ + priv->omsg_ring[mbox].omd_base = dma_alloc_coherent( + &priv->pdev->dev, + (entries + 1) * sizeof(struct tsi721_omsg_desc), + &priv->omsg_ring[mbox].omd_phys, GFP_KERNEL); + if (priv->omsg_ring[mbox].omd_base == NULL) { + dev_dbg(&priv->pdev->dev, + "Unable to allocate OB MSG descriptor memory " + "for MBOX%d\n", mbox); + rc = -ENOMEM; + goto out_buf; + } + + priv->omsg_ring[mbox].tx_slot = 0; + + /* Outbound message descriptor status FIFO allocation */ + priv->omsg_ring[mbox].sts_size = roundup_pow_of_two(entries + 1); + priv->omsg_ring[mbox].sts_base = dma_alloc_coherent(&priv->pdev->dev, + priv->omsg_ring[mbox].sts_size * + sizeof(struct tsi721_dma_sts), + &priv->omsg_ring[mbox].sts_phys, GFP_KERNEL); + if (priv->omsg_ring[mbox].sts_base == NULL) { + dev_dbg(&priv->pdev->dev, + "Unable to allocate OB MSG descriptor status FIFO " + "for MBOX%d\n", mbox); + rc = -ENOMEM; + goto out_desc; + } + + memset(priv->omsg_ring[mbox].sts_base, 0, + entries * sizeof(struct tsi721_dma_sts)); + + /* + * Configure Outbound Messaging Engine + */ + + /* Setup Outbound Message descriptor pointer */ + iowrite32(((u64)priv->omsg_ring[mbox].omd_phys >> 32), + priv->regs + TSI721_OBDMAC_DPTRH(mbox)); + iowrite32(((u64)priv->omsg_ring[mbox].omd_phys & + TSI721_OBDMAC_DPTRL_MASK), + priv->regs + TSI721_OBDMAC_DPTRL(mbox)); + + /* Setup Outbound Message descriptor status FIFO */ + iowrite32(((u64)priv->omsg_ring[mbox].sts_phys >> 32), + priv->regs + TSI721_OBDMAC_DSBH(mbox)); + iowrite32(((u64)priv->omsg_ring[mbox].sts_phys & + TSI721_OBDMAC_DSBL_MASK), + priv->regs + TSI721_OBDMAC_DSBL(mbox)); + iowrite32(TSI721_DMAC_DSSZ_SIZE(priv->omsg_ring[mbox].sts_size), + priv->regs + (u32)TSI721_OBDMAC_DSSZ(mbox)); + + /* Enable interrupts */ + +#ifdef CONFIG_PCI_MSI + if (priv->flags & TSI721_USING_MSIX) { + /* Request interrupt service if we are in MSI-X mode */ + rc = request_irq( + priv->msix[TSI721_VECT_OMB0_DONE + mbox].vector, + tsi721_omsg_msix, 0, + priv->msix[TSI721_VECT_OMB0_DONE + mbox].irq_name, + (void *)mport); + + if (rc) { + dev_dbg(&priv->pdev->dev, + "Unable to allocate MSI-X interrupt for " + "OBOX%d-DONE\n", mbox); + goto out_stat; + } + + rc = request_irq(priv->msix[TSI721_VECT_OMB0_INT + mbox].vector, + tsi721_omsg_msix, 0, + priv->msix[TSI721_VECT_OMB0_INT + mbox].irq_name, + (void *)mport); + + if (rc) { + dev_dbg(&priv->pdev->dev, + "Unable to allocate MSI-X interrupt for " + "MBOX%d-INT\n", mbox); + free_irq( + priv->msix[TSI721_VECT_OMB0_DONE + mbox].vector, + (void *)mport); + goto out_stat; + } + } +#endif /* CONFIG_PCI_MSI */ + + tsi721_omsg_interrupt_enable(priv, mbox, TSI721_OBDMAC_INT_ALL); + + /* Initialize Outbound Message descriptors ring */ + bd_ptr = priv->omsg_ring[mbox].omd_base; + bd_ptr[entries].type_id = cpu_to_le32(DTYPE5 << 29); + bd_ptr[entries].msg_info = 0; + bd_ptr[entries].next_lo = + cpu_to_le32((u64)priv->omsg_ring[mbox].omd_phys & + TSI721_OBDMAC_DPTRL_MASK); + bd_ptr[entries].next_hi = + cpu_to_le32((u64)priv->omsg_ring[mbox].omd_phys >> 32); + priv->omsg_ring[mbox].wr_count = 0; + mb(); + + /* Initialize Outbound Message engine */ + iowrite32(TSI721_OBDMAC_CTL_INIT, priv->regs + TSI721_OBDMAC_CTL(mbox)); + ioread32(priv->regs + TSI721_OBDMAC_DWRCNT(mbox)); + udelay(10); + + priv->omsg_init[mbox] = 1; + + return 0; + +#ifdef CONFIG_PCI_MSI +out_stat: + dma_free_coherent(&priv->pdev->dev, + priv->omsg_ring[mbox].sts_size * sizeof(struct tsi721_dma_sts), + priv->omsg_ring[mbox].sts_base, + priv->omsg_ring[mbox].sts_phys); + + priv->omsg_ring[mbox].sts_base = NULL; +#endif /* CONFIG_PCI_MSI */ + +out_desc: + dma_free_coherent(&priv->pdev->dev, + (entries + 1) * sizeof(struct tsi721_omsg_desc), + priv->omsg_ring[mbox].omd_base, + priv->omsg_ring[mbox].omd_phys); + + priv->omsg_ring[mbox].omd_base = NULL; + +out_buf: + for (i = 0; i < priv->omsg_ring[mbox].size; i++) { + if (priv->omsg_ring[mbox].omq_base[i]) { + dma_free_coherent(&priv->pdev->dev, + TSI721_MSG_BUFFER_SIZE, + priv->omsg_ring[mbox].omq_base[i], + priv->omsg_ring[mbox].omq_phys[i]); + + priv->omsg_ring[mbox].omq_base[i] = NULL; + } + } + +out: + return rc; +} + +/** + * tsi721_close_outb_mbox - Close Tsi721 outbound mailbox + * @mport: Master port implementing the outbound message unit + * @mbox: Mailbox to close + */ +static void tsi721_close_outb_mbox(struct rio_mport *mport, int mbox) +{ + struct tsi721_device *priv = mport->priv; + u32 i; + + if (!priv->omsg_init[mbox]) + return; + priv->omsg_init[mbox] = 0; + + /* Disable Interrupts */ + + tsi721_omsg_interrupt_disable(priv, mbox, TSI721_OBDMAC_INT_ALL); + +#ifdef CONFIG_PCI_MSI + if (priv->flags & TSI721_USING_MSIX) { + free_irq(priv->msix[TSI721_VECT_OMB0_DONE + mbox].vector, + (void *)mport); + free_irq(priv->msix[TSI721_VECT_OMB0_INT + mbox].vector, + (void *)mport); + } +#endif /* CONFIG_PCI_MSI */ + + /* Free OMSG Descriptor Status FIFO */ + dma_free_coherent(&priv->pdev->dev, + priv->omsg_ring[mbox].sts_size * sizeof(struct tsi721_dma_sts), + priv->omsg_ring[mbox].sts_base, + priv->omsg_ring[mbox].sts_phys); + + priv->omsg_ring[mbox].sts_base = NULL; + + /* Free OMSG descriptors */ + dma_free_coherent(&priv->pdev->dev, + (priv->omsg_ring[mbox].size + 1) * + sizeof(struct tsi721_omsg_desc), + priv->omsg_ring[mbox].omd_base, + priv->omsg_ring[mbox].omd_phys); + + priv->omsg_ring[mbox].omd_base = NULL; + + /* Free message buffers */ + for (i = 0; i < priv->omsg_ring[mbox].size; i++) { + if (priv->omsg_ring[mbox].omq_base[i]) { + dma_free_coherent(&priv->pdev->dev, + TSI721_MSG_BUFFER_SIZE, + priv->omsg_ring[mbox].omq_base[i], + priv->omsg_ring[mbox].omq_phys[i]); + + priv->omsg_ring[mbox].omq_base[i] = NULL; + } + } +} + +/** + * tsi721_imsg_handler - Inbound Message Interrupt Handler + * @priv: pointer to tsi721 private data + * @ch: inbound message channel number to service + * + * Services channel interrupts from inbound messaging engine. + */ +static void tsi721_imsg_handler(struct tsi721_device *priv, int ch) +{ + u32 mbox = ch - 4; + u32 imsg_int; + + spin_lock(&priv->imsg_ring[mbox].lock); + + imsg_int = ioread32(priv->regs + TSI721_IBDMAC_INT(ch)); + + if (imsg_int & TSI721_IBDMAC_INT_SRTO) + dev_info(&priv->pdev->dev, "IB MBOX%d SRIO timeout\n", + mbox); + + if (imsg_int & TSI721_IBDMAC_INT_PC_ERROR) + dev_info(&priv->pdev->dev, "IB MBOX%d PCIe error\n", + mbox); + + if (imsg_int & TSI721_IBDMAC_INT_FQ_LOW) + dev_info(&priv->pdev->dev, + "IB MBOX%d IB free queue low\n", mbox); + + /* Clear IB channel interrupts */ + iowrite32(imsg_int, priv->regs + TSI721_IBDMAC_INT(ch)); + + /* If an IB Msg is received notify the upper layer */ + if (imsg_int & TSI721_IBDMAC_INT_DQ_RCV && + priv->mport->inb_msg[mbox].mcback) + priv->mport->inb_msg[mbox].mcback(priv->mport, + priv->imsg_ring[mbox].dev_id, mbox, -1); + + if (!(priv->flags & TSI721_USING_MSIX)) { + u32 ch_inte; + + /* Re-enable channel interrupts */ + ch_inte = ioread32(priv->regs + TSI721_DEV_CHAN_INTE); + ch_inte |= TSI721_INT_IMSG_CHAN(ch); + iowrite32(ch_inte, priv->regs + TSI721_DEV_CHAN_INTE); + } + + spin_unlock(&priv->imsg_ring[mbox].lock); +} + +/** + * tsi721_open_inb_mbox - Initialize Tsi721 inbound mailbox + * @mport: Master port implementing the Inbound Messaging Engine + * @dev_id: Device specific pointer to pass on event + * @mbox: Mailbox to open + * @entries: Number of entries in the inbound mailbox ring + */ +static int tsi721_open_inb_mbox(struct rio_mport *mport, void *dev_id, + int mbox, int entries) +{ + struct tsi721_device *priv = mport->priv; + int ch = mbox + 4; + int i; + u64 *free_ptr; + int rc = 0; + + if ((entries < TSI721_IMSGD_MIN_RING_SIZE) || + (entries > TSI721_IMSGD_RING_SIZE) || + (!is_power_of_2(entries)) || mbox >= RIO_MAX_MBOX) { + rc = -EINVAL; + goto out; + } + + /* Initialize IB Messaging Ring */ + priv->imsg_ring[mbox].dev_id = dev_id; + priv->imsg_ring[mbox].size = entries; + priv->imsg_ring[mbox].rx_slot = 0; + priv->imsg_ring[mbox].desc_rdptr = 0; + priv->imsg_ring[mbox].fq_wrptr = 0; + for (i = 0; i < priv->imsg_ring[mbox].size; i++) + priv->imsg_ring[mbox].imq_base[i] = NULL; + spin_lock_init(&priv->imsg_ring[mbox].lock); + + /* Allocate buffers for incoming messages */ + priv->imsg_ring[mbox].buf_base = + dma_alloc_coherent(&priv->pdev->dev, + entries * TSI721_MSG_BUFFER_SIZE, + &priv->imsg_ring[mbox].buf_phys, + GFP_KERNEL); + + if (priv->imsg_ring[mbox].buf_base == NULL) { + dev_err(&priv->pdev->dev, + "Failed to allocate buffers for IB MBOX%d\n", mbox); + rc = -ENOMEM; + goto out; + } + + /* Allocate memory for circular free list */ + priv->imsg_ring[mbox].imfq_base = + dma_alloc_coherent(&priv->pdev->dev, + entries * 8, + &priv->imsg_ring[mbox].imfq_phys, + GFP_KERNEL); + + if (priv->imsg_ring[mbox].imfq_base == NULL) { + dev_err(&priv->pdev->dev, + "Failed to allocate free queue for IB MBOX%d\n", mbox); + rc = -ENOMEM; + goto out_buf; + } + + /* Allocate memory for Inbound message descriptors */ + priv->imsg_ring[mbox].imd_base = + dma_alloc_coherent(&priv->pdev->dev, + entries * sizeof(struct tsi721_imsg_desc), + &priv->imsg_ring[mbox].imd_phys, GFP_KERNEL); + + if (priv->imsg_ring[mbox].imd_base == NULL) { + dev_err(&priv->pdev->dev, + "Failed to allocate descriptor memory for IB MBOX%d\n", + mbox); + rc = -ENOMEM; + goto out_dma; + } + + /* Fill free buffer pointer list */ + free_ptr = priv->imsg_ring[mbox].imfq_base; + for (i = 0; i < entries; i++) + free_ptr[i] = cpu_to_le64( + (u64)(priv->imsg_ring[mbox].buf_phys) + + i * 0x1000); + + mb(); + + /* + * For mapping of inbound SRIO Messages into appropriate queues we need + * to set Inbound Device ID register in the messaging engine. We do it + * once when first inbound mailbox is requested. + */ + if (!(priv->flags & TSI721_IMSGID_SET)) { + iowrite32((u32)priv->mport->host_deviceid, + priv->regs + TSI721_IB_DEVID); + priv->flags |= TSI721_IMSGID_SET; + } + + /* + * Configure Inbound Messaging channel (ch = mbox + 4) + */ + + /* Setup Inbound Message free queue */ + iowrite32(((u64)priv->imsg_ring[mbox].imfq_phys >> 32), + priv->regs + TSI721_IBDMAC_FQBH(ch)); + iowrite32(((u64)priv->imsg_ring[mbox].imfq_phys & + TSI721_IBDMAC_FQBL_MASK), + priv->regs+TSI721_IBDMAC_FQBL(ch)); + iowrite32(TSI721_DMAC_DSSZ_SIZE(entries), + priv->regs + TSI721_IBDMAC_FQSZ(ch)); + + /* Setup Inbound Message descriptor queue */ + iowrite32(((u64)priv->imsg_ring[mbox].imd_phys >> 32), + priv->regs + TSI721_IBDMAC_DQBH(ch)); + iowrite32(((u32)priv->imsg_ring[mbox].imd_phys & + (u32)TSI721_IBDMAC_DQBL_MASK), + priv->regs+TSI721_IBDMAC_DQBL(ch)); + iowrite32(TSI721_DMAC_DSSZ_SIZE(entries), + priv->regs + TSI721_IBDMAC_DQSZ(ch)); + + /* Enable interrupts */ + +#ifdef CONFIG_PCI_MSI + if (priv->flags & TSI721_USING_MSIX) { + /* Request interrupt service if we are in MSI-X mode */ + rc = request_irq(priv->msix[TSI721_VECT_IMB0_RCV + mbox].vector, + tsi721_imsg_msix, 0, + priv->msix[TSI721_VECT_IMB0_RCV + mbox].irq_name, + (void *)mport); + + if (rc) { + dev_dbg(&priv->pdev->dev, + "Unable to allocate MSI-X interrupt for " + "IBOX%d-DONE\n", mbox); + goto out_desc; + } + + rc = request_irq(priv->msix[TSI721_VECT_IMB0_INT + mbox].vector, + tsi721_imsg_msix, 0, + priv->msix[TSI721_VECT_IMB0_INT + mbox].irq_name, + (void *)mport); + + if (rc) { + dev_dbg(&priv->pdev->dev, + "Unable to allocate MSI-X interrupt for " + "IBOX%d-INT\n", mbox); + free_irq( + priv->msix[TSI721_VECT_IMB0_RCV + mbox].vector, + (void *)mport); + goto out_desc; + } + } +#endif /* CONFIG_PCI_MSI */ + + tsi721_imsg_interrupt_enable(priv, ch, TSI721_IBDMAC_INT_ALL); + + /* Initialize Inbound Message Engine */ + iowrite32(TSI721_IBDMAC_CTL_INIT, priv->regs + TSI721_IBDMAC_CTL(ch)); + ioread32(priv->regs + TSI721_IBDMAC_CTL(ch)); + udelay(10); + priv->imsg_ring[mbox].fq_wrptr = entries - 1; + iowrite32(entries - 1, priv->regs + TSI721_IBDMAC_FQWP(ch)); + + priv->imsg_init[mbox] = 1; + return 0; + +#ifdef CONFIG_PCI_MSI +out_desc: + dma_free_coherent(&priv->pdev->dev, + priv->imsg_ring[mbox].size * sizeof(struct tsi721_imsg_desc), + priv->imsg_ring[mbox].imd_base, + priv->imsg_ring[mbox].imd_phys); + + priv->imsg_ring[mbox].imd_base = NULL; +#endif /* CONFIG_PCI_MSI */ + +out_dma: + dma_free_coherent(&priv->pdev->dev, + priv->imsg_ring[mbox].size * 8, + priv->imsg_ring[mbox].imfq_base, + priv->imsg_ring[mbox].imfq_phys); + + priv->imsg_ring[mbox].imfq_base = NULL; + +out_buf: + dma_free_coherent(&priv->pdev->dev, + priv->imsg_ring[mbox].size * TSI721_MSG_BUFFER_SIZE, + priv->imsg_ring[mbox].buf_base, + priv->imsg_ring[mbox].buf_phys); + + priv->imsg_ring[mbox].buf_base = NULL; + +out: + return rc; +} + +/** + * tsi721_close_inb_mbox - Shut down Tsi721 inbound mailbox + * @mport: Master port implementing the Inbound Messaging Engine + * @mbox: Mailbox to close + */ +static void tsi721_close_inb_mbox(struct rio_mport *mport, int mbox) +{ + struct tsi721_device *priv = mport->priv; + u32 rx_slot; + int ch = mbox + 4; + + if (!priv->imsg_init[mbox]) /* mbox isn't initialized yet */ + return; + priv->imsg_init[mbox] = 0; + + /* Disable Inbound Messaging Engine */ + + /* Disable Interrupts */ + tsi721_imsg_interrupt_disable(priv, ch, TSI721_OBDMAC_INT_MASK); + +#ifdef CONFIG_PCI_MSI + if (priv->flags & TSI721_USING_MSIX) { + free_irq(priv->msix[TSI721_VECT_IMB0_RCV + mbox].vector, + (void *)mport); + free_irq(priv->msix[TSI721_VECT_IMB0_INT + mbox].vector, + (void *)mport); + } +#endif /* CONFIG_PCI_MSI */ + + /* Clear Inbound Buffer Queue */ + for (rx_slot = 0; rx_slot < priv->imsg_ring[mbox].size; rx_slot++) + priv->imsg_ring[mbox].imq_base[rx_slot] = NULL; + + /* Free memory allocated for message buffers */ + dma_free_coherent(&priv->pdev->dev, + priv->imsg_ring[mbox].size * TSI721_MSG_BUFFER_SIZE, + priv->imsg_ring[mbox].buf_base, + priv->imsg_ring[mbox].buf_phys); + + priv->imsg_ring[mbox].buf_base = NULL; + + /* Free memory allocated for free pointr list */ + dma_free_coherent(&priv->pdev->dev, + priv->imsg_ring[mbox].size * 8, + priv->imsg_ring[mbox].imfq_base, + priv->imsg_ring[mbox].imfq_phys); + + priv->imsg_ring[mbox].imfq_base = NULL; + + /* Free memory allocated for RX descriptors */ + dma_free_coherent(&priv->pdev->dev, + priv->imsg_ring[mbox].size * sizeof(struct tsi721_imsg_desc), + priv->imsg_ring[mbox].imd_base, + priv->imsg_ring[mbox].imd_phys); + + priv->imsg_ring[mbox].imd_base = NULL; +} + +/** + * tsi721_add_inb_buffer - Add buffer to the Tsi721 inbound message queue + * @mport: Master port implementing the Inbound Messaging Engine + * @mbox: Inbound mailbox number + * @buf: Buffer to add to inbound queue + */ +static int tsi721_add_inb_buffer(struct rio_mport *mport, int mbox, void *buf) +{ + struct tsi721_device *priv = mport->priv; + u32 rx_slot; + int rc = 0; + + rx_slot = priv->imsg_ring[mbox].rx_slot; + if (priv->imsg_ring[mbox].imq_base[rx_slot]) { + dev_err(&priv->pdev->dev, + "Error adding inbound buffer %d, buffer exists\n", + rx_slot); + rc = -EINVAL; + goto out; + } + + priv->imsg_ring[mbox].imq_base[rx_slot] = buf; + + if (++priv->imsg_ring[mbox].rx_slot == priv->imsg_ring[mbox].size) + priv->imsg_ring[mbox].rx_slot = 0; + +out: + return rc; +} + +/** + * tsi721_get_inb_message - Fetch inbound message from the Tsi721 MSG Queue + * @mport: Master port implementing the Inbound Messaging Engine + * @mbox: Inbound mailbox number + * + * Returns pointer to the message on success or NULL on failure. + */ +static void *tsi721_get_inb_message(struct rio_mport *mport, int mbox) +{ + struct tsi721_device *priv = mport->priv; + struct tsi721_imsg_desc *desc; + u32 rx_slot; + void *rx_virt = NULL; + u64 rx_phys; + void *buf = NULL; + u64 *free_ptr; + int ch = mbox + 4; + int msg_size; + + if (!priv->imsg_init[mbox]) + return NULL; + + desc = priv->imsg_ring[mbox].imd_base; + desc += priv->imsg_ring[mbox].desc_rdptr; + + if (!(le32_to_cpu(desc->msg_info) & TSI721_IMD_HO)) + goto out; + + rx_slot = priv->imsg_ring[mbox].rx_slot; + while (priv->imsg_ring[mbox].imq_base[rx_slot] == NULL) { + if (++rx_slot == priv->imsg_ring[mbox].size) + rx_slot = 0; + } + + rx_phys = ((u64)le32_to_cpu(desc->bufptr_hi) << 32) | + le32_to_cpu(desc->bufptr_lo); + + rx_virt = priv->imsg_ring[mbox].buf_base + + (rx_phys - (u64)priv->imsg_ring[mbox].buf_phys); + + buf = priv->imsg_ring[mbox].imq_base[rx_slot]; + msg_size = le32_to_cpu(desc->msg_info) & TSI721_IMD_BCOUNT; + if (msg_size == 0) + msg_size = RIO_MAX_MSG_SIZE; + + memcpy(buf, rx_virt, msg_size); + priv->imsg_ring[mbox].imq_base[rx_slot] = NULL; + + desc->msg_info &= cpu_to_le32(~TSI721_IMD_HO); + if (++priv->imsg_ring[mbox].desc_rdptr == priv->imsg_ring[mbox].size) + priv->imsg_ring[mbox].desc_rdptr = 0; + + iowrite32(priv->imsg_ring[mbox].desc_rdptr, + priv->regs + TSI721_IBDMAC_DQRP(ch)); + + /* Return free buffer into the pointer list */ + free_ptr = priv->imsg_ring[mbox].imfq_base; + free_ptr[priv->imsg_ring[mbox].fq_wrptr] = cpu_to_le64(rx_phys); + + if (++priv->imsg_ring[mbox].fq_wrptr == priv->imsg_ring[mbox].size) + priv->imsg_ring[mbox].fq_wrptr = 0; + + iowrite32(priv->imsg_ring[mbox].fq_wrptr, + priv->regs + TSI721_IBDMAC_FQWP(ch)); +out: + return buf; +} + +/** + * tsi721_messages_init - Initialization of Messaging Engine + * @priv: pointer to tsi721 private data + * + * Configures Tsi721 messaging engine. + */ +static int tsi721_messages_init(struct tsi721_device *priv) +{ + int ch; + + iowrite32(0, priv->regs + TSI721_SMSG_ECC_LOG); + iowrite32(0, priv->regs + TSI721_RETRY_GEN_CNT); + iowrite32(0, priv->regs + TSI721_RETRY_RX_CNT); + + /* Set SRIO Message Request/Response Timeout */ + iowrite32(TSI721_RQRPTO_VAL, priv->regs + TSI721_RQRPTO); + + /* Initialize Inbound Messaging Engine Registers */ + for (ch = 0; ch < TSI721_IMSG_CHNUM; ch++) { + /* Clear interrupt bits */ + iowrite32(TSI721_IBDMAC_INT_MASK, + priv->regs + TSI721_IBDMAC_INT(ch)); + /* Clear Status */ + iowrite32(0, priv->regs + TSI721_IBDMAC_STS(ch)); + + iowrite32(TSI721_SMSG_ECC_COR_LOG_MASK, + priv->regs + TSI721_SMSG_ECC_COR_LOG(ch)); + iowrite32(TSI721_SMSG_ECC_NCOR_MASK, + priv->regs + TSI721_SMSG_ECC_NCOR(ch)); + } + + return 0; +} + +/** + * tsi721_disable_ints - disables all device interrupts + * @priv: pointer to tsi721 private data + */ +static void tsi721_disable_ints(struct tsi721_device *priv) +{ + int ch; + + /* Disable all device level interrupts */ + iowrite32(0, priv->regs + TSI721_DEV_INTE); + + /* Disable all Device Channel interrupts */ + iowrite32(0, priv->regs + TSI721_DEV_CHAN_INTE); + + /* Disable all Inbound Msg Channel interrupts */ + for (ch = 0; ch < TSI721_IMSG_CHNUM; ch++) + iowrite32(0, priv->regs + TSI721_IBDMAC_INTE(ch)); + + /* Disable all Outbound Msg Channel interrupts */ + for (ch = 0; ch < TSI721_OMSG_CHNUM; ch++) + iowrite32(0, priv->regs + TSI721_OBDMAC_INTE(ch)); + + /* Disable all general messaging interrupts */ + iowrite32(0, priv->regs + TSI721_SMSG_INTE); + + /* Disable all BDMA Channel interrupts */ + for (ch = 0; ch < TSI721_DMA_MAXCH; ch++) + iowrite32(0, priv->regs + TSI721_DMAC_INTE(ch)); + + /* Disable all general BDMA interrupts */ + iowrite32(0, priv->regs + TSI721_BDMA_INTE); + + /* Disable all SRIO Channel interrupts */ + for (ch = 0; ch < TSI721_SRIO_MAXCH; ch++) + iowrite32(0, priv->regs + TSI721_SR_CHINTE(ch)); + + /* Disable all general SR2PC interrupts */ + iowrite32(0, priv->regs + TSI721_SR2PC_GEN_INTE); + + /* Disable all PC2SR interrupts */ + iowrite32(0, priv->regs + TSI721_PC2SR_INTE); + + /* Disable all I2C interrupts */ + iowrite32(0, priv->regs + TSI721_I2C_INT_ENABLE); + + /* Disable SRIO MAC interrupts */ + iowrite32(0, priv->regs + TSI721_RIO_EM_INT_ENABLE); + iowrite32(0, priv->regs + TSI721_RIO_EM_DEV_INT_EN); +} + +/** + * tsi721_setup_mport - Setup Tsi721 as RapidIO subsystem master port + * @priv: pointer to tsi721 private data + * + * Configures Tsi721 as RapidIO master port. + */ +static int __devinit tsi721_setup_mport(struct tsi721_device *priv) +{ + struct pci_dev *pdev = priv->pdev; + int err = 0; + struct rio_ops *ops; + + struct rio_mport *mport; + + ops = kzalloc(sizeof(struct rio_ops), GFP_KERNEL); + if (!ops) { + dev_dbg(&pdev->dev, "Unable to allocate memory for rio_ops\n"); + return -ENOMEM; + } + + ops->lcread = tsi721_lcread; + ops->lcwrite = tsi721_lcwrite; + ops->cread = tsi721_cread_dma; + ops->cwrite = tsi721_cwrite_dma; + ops->dsend = tsi721_dsend; + ops->open_inb_mbox = tsi721_open_inb_mbox; + ops->close_inb_mbox = tsi721_close_inb_mbox; + ops->open_outb_mbox = tsi721_open_outb_mbox; + ops->close_outb_mbox = tsi721_close_outb_mbox; + ops->add_outb_message = tsi721_add_outb_message; + ops->add_inb_buffer = tsi721_add_inb_buffer; + ops->get_inb_message = tsi721_get_inb_message; + + mport = kzalloc(sizeof(struct rio_mport), GFP_KERNEL); + if (!mport) { + kfree(ops); + dev_dbg(&pdev->dev, "Unable to allocate memory for mport\n"); + return -ENOMEM; + } + + mport->ops = ops; + mport->index = 0; + mport->sys_size = 0; /* small system */ + mport->phy_type = RIO_PHY_SERIAL; + mport->priv = (void *)priv; + mport->phys_efptr = 0x100; + + INIT_LIST_HEAD(&mport->dbells); + + rio_init_dbell_res(&mport->riores[RIO_DOORBELL_RESOURCE], 0, 0xffff); + rio_init_mbox_res(&mport->riores[RIO_INB_MBOX_RESOURCE], 0, 0); + rio_init_mbox_res(&mport->riores[RIO_OUTB_MBOX_RESOURCE], 0, 0); + strcpy(mport->name, "Tsi721 mport"); + + /* Hook up interrupt handler */ + +#ifdef CONFIG_PCI_MSI + if (!tsi721_enable_msix(priv)) + priv->flags |= TSI721_USING_MSIX; + else if (!pci_enable_msi(pdev)) + priv->flags |= TSI721_USING_MSI; + else + dev_info(&pdev->dev, + "MSI/MSI-X is not available. Using legacy INTx.\n"); +#endif /* CONFIG_PCI_MSI */ + + err = tsi721_request_irq(mport); + + if (!err) { + tsi721_interrupts_init(priv); + ops->pwenable = tsi721_pw_enable; + } else + dev_err(&pdev->dev, "Unable to get assigned PCI IRQ " + "vector %02X err=0x%x\n", pdev->irq, err); + + /* Enable SRIO link */ + iowrite32(ioread32(priv->regs + TSI721_DEVCTL) | + TSI721_DEVCTL_SRBOOT_CMPL, + priv->regs + TSI721_DEVCTL); + + rio_register_mport(mport); + priv->mport = mport; + + if (mport->host_deviceid >= 0) + iowrite32(RIO_PORT_GEN_HOST | RIO_PORT_GEN_MASTER | + RIO_PORT_GEN_DISCOVERED, + priv->regs + (0x100 + RIO_PORT_GEN_CTL_CSR)); + else + iowrite32(0, priv->regs + (0x100 + RIO_PORT_GEN_CTL_CSR)); + + return 0; +} + +static int __devinit tsi721_probe(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + struct tsi721_device *priv; + int i; + int err; + u32 regval; + + priv = kzalloc(sizeof(struct tsi721_device), GFP_KERNEL); + if (priv == NULL) { + dev_err(&pdev->dev, "Failed to allocate memory for device\n"); + err = -ENOMEM; + goto err_exit; + } + + err = pci_enable_device(pdev); + if (err) { + dev_err(&pdev->dev, "Failed to enable PCI device\n"); + goto err_clean; + } + + priv->pdev = pdev; + +#ifdef DEBUG + for (i = 0; i <= PCI_STD_RESOURCE_END; i++) { + dev_dbg(&pdev->dev, "res[%d] @ 0x%llx (0x%lx, 0x%lx)\n", + i, (unsigned long long)pci_resource_start(pdev, i), + (unsigned long)pci_resource_len(pdev, i), + pci_resource_flags(pdev, i)); + } +#endif + /* + * Verify BAR configuration + */ + + /* BAR_0 (registers) must be 512KB+ in 32-bit address space */ + if (!(pci_resource_flags(pdev, BAR_0) & IORESOURCE_MEM) || + pci_resource_flags(pdev, BAR_0) & IORESOURCE_MEM_64 || + pci_resource_len(pdev, BAR_0) < TSI721_REG_SPACE_SIZE) { + dev_err(&pdev->dev, + "Missing or misconfigured CSR BAR0, aborting.\n"); + err = -ENODEV; + goto err_disable_pdev; + } + + /* BAR_1 (outbound doorbells) must be 16MB+ in 32-bit address space */ + if (!(pci_resource_flags(pdev, BAR_1) & IORESOURCE_MEM) || + pci_resource_flags(pdev, BAR_1) & IORESOURCE_MEM_64 || + pci_resource_len(pdev, BAR_1) < TSI721_DB_WIN_SIZE) { + dev_err(&pdev->dev, + "Missing or misconfigured Doorbell BAR1, aborting.\n"); + err = -ENODEV; + goto err_disable_pdev; + } + + /* + * BAR_2 and BAR_4 (outbound translation) must be in 64-bit PCIe address + * space. + * NOTE: BAR_2 and BAR_4 are not used by this version of driver. + * It may be a good idea to keep them disabled using HW configuration + * to save PCI memory space. + */ + if ((pci_resource_flags(pdev, BAR_2) & IORESOURCE_MEM) && + (pci_resource_flags(pdev, BAR_2) & IORESOURCE_MEM_64)) { + dev_info(&pdev->dev, "Outbound BAR2 is not used but enabled.\n"); + } + + if ((pci_resource_flags(pdev, BAR_4) & IORESOURCE_MEM) && + (pci_resource_flags(pdev, BAR_4) & IORESOURCE_MEM_64)) { + dev_info(&pdev->dev, "Outbound BAR4 is not used but enabled.\n"); + } + + err = pci_request_regions(pdev, DRV_NAME); + if (err) { + dev_err(&pdev->dev, "Cannot obtain PCI resources, " + "aborting.\n"); + goto err_disable_pdev; + } + + pci_set_master(pdev); + + priv->regs = pci_ioremap_bar(pdev, BAR_0); + if (!priv->regs) { + dev_err(&pdev->dev, + "Unable to map device registers space, aborting\n"); + err = -ENOMEM; + goto err_free_res; + } + + priv->odb_base = pci_ioremap_bar(pdev, BAR_1); + if (!priv->odb_base) { + dev_err(&pdev->dev, + "Unable to map outbound doorbells space, aborting\n"); + err = -ENOMEM; + goto err_unmap_bars; + } + + /* Configure DMA attributes. */ + if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) { + if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) { + dev_info(&pdev->dev, "Unable to set DMA mask\n"); + goto err_unmap_bars; + } + + if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) + dev_info(&pdev->dev, "Unable to set consistent DMA mask\n"); + } else { + err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)); + if (err) + dev_info(&pdev->dev, "Unable to set consistent DMA mask\n"); + } + + /* Clear "no snoop" and "relaxed ordering" bits. */ + pci_read_config_dword(pdev, 0x40 + PCI_EXP_DEVCTL, ®val); + regval &= ~(PCI_EXP_DEVCTL_RELAX_EN | PCI_EXP_DEVCTL_NOSNOOP_EN); + pci_write_config_dword(pdev, 0x40 + PCI_EXP_DEVCTL, regval); + + /* + * FIXUP: correct offsets of MSI-X tables in the MSI-X Capability Block + */ + pci_write_config_dword(pdev, TSI721_PCIECFG_EPCTL, 0x01); + pci_write_config_dword(pdev, TSI721_PCIECFG_MSIXTBL, + TSI721_MSIXTBL_OFFSET); + pci_write_config_dword(pdev, TSI721_PCIECFG_MSIXPBA, + TSI721_MSIXPBA_OFFSET); + pci_write_config_dword(pdev, TSI721_PCIECFG_EPCTL, 0); + /* End of FIXUP */ + + tsi721_disable_ints(priv); + + tsi721_init_pc2sr_mapping(priv); + tsi721_init_sr2pc_mapping(priv); + + if (tsi721_bdma_init(priv)) { + dev_err(&pdev->dev, "BDMA initialization failed, aborting\n"); + err = -ENOMEM; + goto err_unmap_bars; + } + + err = tsi721_doorbell_init(priv); + if (err) + goto err_free_bdma; + + tsi721_port_write_init(priv); + + err = tsi721_messages_init(priv); + if (err) + goto err_free_consistent; + + err = tsi721_setup_mport(priv); + if (err) + goto err_free_consistent; + + return 0; + +err_free_consistent: + tsi721_doorbell_free(priv); +err_free_bdma: + tsi721_bdma_free(priv); +err_unmap_bars: + if (priv->regs) + iounmap(priv->regs); + if (priv->odb_base) + iounmap(priv->odb_base); +err_free_res: + pci_release_regions(pdev); + pci_clear_master(pdev); +err_disable_pdev: + pci_disable_device(pdev); +err_clean: + kfree(priv); +err_exit: + return err; +} + +static DEFINE_PCI_DEVICE_TABLE(tsi721_pci_tbl) = { + { PCI_DEVICE(PCI_VENDOR_ID_IDT, PCI_DEVICE_ID_TSI721) }, + { 0, } /* terminate list */ +}; + +MODULE_DEVICE_TABLE(pci, tsi721_pci_tbl); + +static struct pci_driver tsi721_driver = { + .name = "tsi721", + .id_table = tsi721_pci_tbl, + .probe = tsi721_probe, +}; + +static int __init tsi721_init(void) +{ + return pci_register_driver(&tsi721_driver); +} + +static void __exit tsi721_exit(void) +{ + pci_unregister_driver(&tsi721_driver); +} + +device_initcall(tsi721_init); diff --git a/drivers/rapidio/devices/tsi721.h b/drivers/rapidio/devices/tsi721.h new file mode 100644 index 000000000000..58be4deb1402 --- /dev/null +++ b/drivers/rapidio/devices/tsi721.h @@ -0,0 +1,766 @@ +/* + * Tsi721 PCIExpress-to-SRIO bridge definitions + * + * Copyright 2011, Integrated Device Technology, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 + * Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef __TSI721_H +#define __TSI721_H + +#define DRV_NAME "tsi721" + +#define DEFAULT_HOPCOUNT 0xff +#define DEFAULT_DESTID 0xff + +/* PCI device ID */ +#define PCI_DEVICE_ID_TSI721 0x80ab + +#define BAR_0 0 +#define BAR_1 1 +#define BAR_2 2 +#define BAR_4 4 + +#define TSI721_PC2SR_BARS 2 +#define TSI721_PC2SR_WINS 8 +#define TSI721_PC2SR_ZONES 8 +#define TSI721_MAINT_WIN 0 /* Window for outbound maintenance requests */ +#define IDB_QUEUE 0 /* Inbound Doorbell Queue to use */ +#define IDB_QSIZE 512 /* Inbound Doorbell Queue size */ + +/* Memory space sizes */ +#define TSI721_REG_SPACE_SIZE (512 * 1024) /* 512K */ +#define TSI721_DB_WIN_SIZE (16 * 1024 * 1024) /* 16MB */ + +#define RIO_TT_CODE_8 0x00000000 +#define RIO_TT_CODE_16 0x00000001 + +#define TSI721_DMA_MAXCH 8 +#define TSI721_DMA_MINSTSSZ 32 +#define TSI721_DMA_STSBLKSZ 8 + +#define TSI721_SRIO_MAXCH 8 + +#define DBELL_SID(buf) (((u8)buf[2] << 8) | (u8)buf[3]) +#define DBELL_TID(buf) (((u8)buf[4] << 8) | (u8)buf[5]) +#define DBELL_INF(buf) (((u8)buf[0] << 8) | (u8)buf[1]) + +#define TSI721_RIO_PW_MSG_SIZE 16 /* Tsi721 saves only 16 bytes of PW msg */ + +/* Register definitions */ + +/* + * Registers in PCIe configuration space + */ + +#define TSI721_PCIECFG_MSIXTBL 0x0a4 +#define TSI721_MSIXTBL_OFFSET 0x2c000 +#define TSI721_PCIECFG_MSIXPBA 0x0a8 +#define TSI721_MSIXPBA_OFFSET 0x2a000 +#define TSI721_PCIECFG_EPCTL 0x400 + +/* + * Event Management Registers + */ + +#define TSI721_RIO_EM_INT_STAT 0x10910 +#define TSI721_RIO_EM_INT_STAT_PW_RX 0x00010000 + +#define TSI721_RIO_EM_INT_ENABLE 0x10914 +#define TSI721_RIO_EM_INT_ENABLE_PW_RX 0x00010000 + +#define TSI721_RIO_EM_DEV_INT_EN 0x10930 +#define TSI721_RIO_EM_DEV_INT_EN_INT 0x00000001 + +/* + * Port-Write Block Registers + */ + +#define TSI721_RIO_PW_CTL 0x10a04 +#define TSI721_RIO_PW_CTL_PW_TIMER 0xf0000000 +#define TSI721_RIO_PW_CTL_PWT_DIS (0 << 28) +#define TSI721_RIO_PW_CTL_PWT_103 (1 << 28) +#define TSI721_RIO_PW_CTL_PWT_205 (1 << 29) +#define TSI721_RIO_PW_CTL_PWT_410 (1 << 30) +#define TSI721_RIO_PW_CTL_PWT_820 (1 << 31) +#define TSI721_RIO_PW_CTL_PWC_MODE 0x01000000 +#define TSI721_RIO_PW_CTL_PWC_CONT 0x00000000 +#define TSI721_RIO_PW_CTL_PWC_REL 0x01000000 + +#define TSI721_RIO_PW_RX_STAT 0x10a10 +#define TSI721_RIO_PW_RX_STAT_WR_SIZE 0x0000f000 +#define TSI_RIO_PW_RX_STAT_WDPTR 0x00000100 +#define TSI721_RIO_PW_RX_STAT_PW_SHORT 0x00000008 +#define TSI721_RIO_PW_RX_STAT_PW_TRUNC 0x00000004 +#define TSI721_RIO_PW_RX_STAT_PW_DISC 0x00000002 +#define TSI721_RIO_PW_RX_STAT_PW_VAL 0x00000001 + +#define TSI721_RIO_PW_RX_CAPT(x) (0x10a20 + (x)*4) + +/* + * Inbound Doorbells + */ + +#define TSI721_IDB_ENTRY_SIZE 64 + +#define TSI721_IDQ_CTL(x) (0x20000 + (x) * 1000) +#define TSI721_IDQ_SUSPEND 0x00000002 +#define TSI721_IDQ_INIT 0x00000001 + +#define TSI721_IDQ_STS(x) (0x20004 + (x) * 1000) +#define TSI721_IDQ_RUN 0x00200000 + +#define TSI721_IDQ_MASK(x) (0x20008 + (x) * 1000) +#define TSI721_IDQ_MASK_MASK 0xffff0000 +#define TSI721_IDQ_MASK_PATT 0x0000ffff + +#define TSI721_IDQ_RP(x) (0x2000c + (x) * 1000) +#define TSI721_IDQ_RP_PTR 0x0007ffff + +#define TSI721_IDQ_WP(x) (0x20010 + (x) * 1000) +#define TSI721_IDQ_WP_PTR 0x0007ffff + +#define TSI721_IDQ_BASEL(x) (0x20014 + (x) * 1000) +#define TSI721_IDQ_BASEL_ADDR 0xffffffc0 +#define TSI721_IDQ_BASEU(x) (0x20018 + (x) * 1000) +#define TSI721_IDQ_SIZE(x) (0x2001c + (x) * 1000) +#define TSI721_IDQ_SIZE_VAL(size) (__fls(size) - 4) +#define TSI721_IDQ_SIZE_MIN 512 +#define TSI721_IDQ_SIZE_MAX (512 * 1024) + +#define TSI721_SR_CHINT(x) (0x20040 + (x) * 1000) +#define TSI721_SR_CHINTE(x) (0x20044 + (x) * 1000) +#define TSI721_SR_CHINTSET(x) (0x20048 + (x) * 1000) +#define TSI721_SR_CHINT_ODBOK 0x00000020 +#define TSI721_SR_CHINT_IDBQRCV 0x00000010 +#define TSI721_SR_CHINT_SUSP 0x00000008 +#define TSI721_SR_CHINT_ODBTO 0x00000004 +#define TSI721_SR_CHINT_ODBRTRY 0x00000002 +#define TSI721_SR_CHINT_ODBERR 0x00000001 +#define TSI721_SR_CHINT_ALL 0x0000003f + +#define TSI721_IBWIN_NUM 8 + +#define TSI721_IBWINLB(x) (0x29000 + (x) * 20) +#define TSI721_IBWINLB_BA 0xfffff000 +#define TSI721_IBWINLB_WEN 0x00000001 + +#define TSI721_SR2PC_GEN_INTE 0x29800 +#define TSI721_SR2PC_PWE 0x29804 +#define TSI721_SR2PC_GEN_INT 0x29808 + +#define TSI721_DEV_INTE 0x29840 +#define TSI721_DEV_INT 0x29844 +#define TSI721_DEV_INTSET 0x29848 +#define TSI721_DEV_INT_SMSG_CH 0x00000800 +#define TSI721_DEV_INT_SMSG_NCH 0x00000400 +#define TSI721_DEV_INT_SR2PC_CH 0x00000200 +#define TSI721_DEV_INT_SRIO 0x00000020 + +#define TSI721_DEV_CHAN_INTE 0x2984c +#define TSI721_DEV_CHAN_INT 0x29850 + +#define TSI721_INT_SR2PC_CHAN_M 0xff000000 +#define TSI721_INT_SR2PC_CHAN(x) (1 << (24 + (x))) +#define TSI721_INT_IMSG_CHAN_M 0x00ff0000 +#define TSI721_INT_IMSG_CHAN(x) (1 << (16 + (x))) +#define TSI721_INT_OMSG_CHAN_M 0x0000ff00 +#define TSI721_INT_OMSG_CHAN(x) (1 << (8 + (x))) + +/* + * PC2SR block registers + */ +#define TSI721_OBWIN_NUM TSI721_PC2SR_WINS + +#define TSI721_OBWINLB(x) (0x40000 + (x) * 20) +#define TSI721_OBWINLB_BA 0xffff8000 +#define TSI721_OBWINLB_WEN 0x00000001 + +#define TSI721_OBWINUB(x) (0x40004 + (x) * 20) + +#define TSI721_OBWINSZ(x) (0x40008 + (x) * 20) +#define TSI721_OBWINSZ_SIZE 0x00001f00 +#define TSI721_OBWIN_SIZE(size) (__fls(size) - 15) + +#define TSI721_ZONE_SEL 0x41300 +#define TSI721_ZONE_SEL_RD_WRB 0x00020000 +#define TSI721_ZONE_SEL_GO 0x00010000 +#define TSI721_ZONE_SEL_WIN 0x00000038 +#define TSI721_ZONE_SEL_ZONE 0x00000007 + +#define TSI721_LUT_DATA0 0x41304 +#define TSI721_LUT_DATA0_ADD 0xfffff000 +#define TSI721_LUT_DATA0_RDTYPE 0x00000f00 +#define TSI721_LUT_DATA0_NREAD 0x00000100 +#define TSI721_LUT_DATA0_MNTRD 0x00000200 +#define TSI721_LUT_DATA0_RDCRF 0x00000020 +#define TSI721_LUT_DATA0_WRCRF 0x00000010 +#define TSI721_LUT_DATA0_WRTYPE 0x0000000f +#define TSI721_LUT_DATA0_NWR 0x00000001 +#define TSI721_LUT_DATA0_MNTWR 0x00000002 +#define TSI721_LUT_DATA0_NWR_R 0x00000004 + +#define TSI721_LUT_DATA1 0x41308 + +#define TSI721_LUT_DATA2 0x4130c +#define TSI721_LUT_DATA2_HC 0xff000000 +#define TSI721_LUT_DATA2_ADD65 0x000c0000 +#define TSI721_LUT_DATA2_TT 0x00030000 +#define TSI721_LUT_DATA2_DSTID 0x0000ffff + +#define TSI721_PC2SR_INTE 0x41310 + +#define TSI721_DEVCTL 0x48004 +#define TSI721_DEVCTL_SRBOOT_CMPL 0x00000004 + +#define TSI721_I2C_INT_ENABLE 0x49120 + +/* + * Block DMA Engine Registers + * x = 0..7 + */ + +#define TSI721_DMAC_DWRCNT(x) (0x51000 + (x) * 0x1000) +#define TSI721_DMAC_DRDCNT(x) (0x51004 + (x) * 0x1000) + +#define TSI721_DMAC_CTL(x) (0x51008 + (x) * 0x1000) +#define TSI721_DMAC_CTL_SUSP 0x00000002 +#define TSI721_DMAC_CTL_INIT 0x00000001 + +#define TSI721_DMAC_INT(x) (0x5100c + (x) * 0x1000) +#define TSI721_DMAC_INT_STFULL 0x00000010 +#define TSI721_DMAC_INT_DONE 0x00000008 +#define TSI721_DMAC_INT_SUSP 0x00000004 +#define TSI721_DMAC_INT_ERR 0x00000002 +#define TSI721_DMAC_INT_IOFDONE 0x00000001 +#define TSI721_DMAC_INT_ALL 0x0000001f + +#define TSI721_DMAC_INTSET(x) (0x51010 + (x) * 0x1000) + +#define TSI721_DMAC_STS(x) (0x51014 + (x) * 0x1000) +#define TSI721_DMAC_STS_ABORT 0x00400000 +#define TSI721_DMAC_STS_RUN 0x00200000 +#define TSI721_DMAC_STS_CS 0x001f0000 + +#define TSI721_DMAC_INTE(x) (0x51018 + (x) * 0x1000) + +#define TSI721_DMAC_DPTRL(x) (0x51024 + (x) * 0x1000) +#define TSI721_DMAC_DPTRL_MASK 0xffffffe0 + +#define TSI721_DMAC_DPTRH(x) (0x51028 + (x) * 0x1000) + +#define TSI721_DMAC_DSBL(x) (0x5102c + (x) * 0x1000) +#define TSI721_DMAC_DSBL_MASK 0xffffffc0 + +#define TSI721_DMAC_DSBH(x) (0x51030 + (x) * 0x1000) + +#define TSI721_DMAC_DSSZ(x) (0x51034 + (x) * 0x1000) +#define TSI721_DMAC_DSSZ_SIZE_M 0x0000000f +#define TSI721_DMAC_DSSZ_SIZE(size) (__fls(size) - 4) + + +#define TSI721_DMAC_DSRP(x) (0x51038 + (x) * 0x1000) +#define TSI721_DMAC_DSRP_MASK 0x0007ffff + +#define TSI721_DMAC_DSWP(x) (0x5103c + (x) * 0x1000) +#define TSI721_DMAC_DSWP_MASK 0x0007ffff + +#define TSI721_BDMA_INTE 0x5f000 + +/* + * Messaging definitions + */ +#define TSI721_MSG_BUFFER_SIZE RIO_MAX_MSG_SIZE +#define TSI721_MSG_MAX_SIZE RIO_MAX_MSG_SIZE +#define TSI721_IMSG_MAXCH 8 +#define TSI721_IMSG_CHNUM TSI721_IMSG_MAXCH +#define TSI721_IMSGD_MIN_RING_SIZE 32 +#define TSI721_IMSGD_RING_SIZE 512 + +#define TSI721_OMSG_CHNUM 4 /* One channel per MBOX */ +#define TSI721_OMSGD_MIN_RING_SIZE 32 +#define TSI721_OMSGD_RING_SIZE 512 + +/* + * Outbound Messaging Engine Registers + * x = 0..7 + */ + +#define TSI721_OBDMAC_DWRCNT(x) (0x61000 + (x) * 0x1000) + +#define TSI721_OBDMAC_DRDCNT(x) (0x61004 + (x) * 0x1000) + +#define TSI721_OBDMAC_CTL(x) (0x61008 + (x) * 0x1000) +#define TSI721_OBDMAC_CTL_MASK 0x00000007 +#define TSI721_OBDMAC_CTL_RETRY_THR 0x00000004 +#define TSI721_OBDMAC_CTL_SUSPEND 0x00000002 +#define TSI721_OBDMAC_CTL_INIT 0x00000001 + +#define TSI721_OBDMAC_INT(x) (0x6100c + (x) * 0x1000) +#define TSI721_OBDMAC_INTSET(x) (0x61010 + (x) * 0x1000) +#define TSI721_OBDMAC_INTE(x) (0x61018 + (x) * 0x1000) +#define TSI721_OBDMAC_INT_MASK 0x0000001F +#define TSI721_OBDMAC_INT_ST_FULL 0x00000010 +#define TSI721_OBDMAC_INT_DONE 0x00000008 +#define TSI721_OBDMAC_INT_SUSPENDED 0x00000004 +#define TSI721_OBDMAC_INT_ERROR 0x00000002 +#define TSI721_OBDMAC_INT_IOF_DONE 0x00000001 +#define TSI721_OBDMAC_INT_ALL TSI721_OBDMAC_INT_MASK + +#define TSI721_OBDMAC_STS(x) (0x61014 + (x) * 0x1000) +#define TSI721_OBDMAC_STS_MASK 0x007f0000 +#define TSI721_OBDMAC_STS_ABORT 0x00400000 +#define TSI721_OBDMAC_STS_RUN 0x00200000 +#define TSI721_OBDMAC_STS_CS 0x001f0000 + +#define TSI721_OBDMAC_PWE(x) (0x6101c + (x) * 0x1000) +#define TSI721_OBDMAC_PWE_MASK 0x00000002 +#define TSI721_OBDMAC_PWE_ERROR_EN 0x00000002 + +#define TSI721_OBDMAC_DPTRL(x) (0x61020 + (x) * 0x1000) +#define TSI721_OBDMAC_DPTRL_MASK 0xfffffff0 + +#define TSI721_OBDMAC_DPTRH(x) (0x61024 + (x) * 0x1000) +#define TSI721_OBDMAC_DPTRH_MASK 0xffffffff + +#define TSI721_OBDMAC_DSBL(x) (0x61040 + (x) * 0x1000) +#define TSI721_OBDMAC_DSBL_MASK 0xffffffc0 + +#define TSI721_OBDMAC_DSBH(x) (0x61044 + (x) * 0x1000) +#define TSI721_OBDMAC_DSBH_MASK 0xffffffff + +#define TSI721_OBDMAC_DSSZ(x) (0x61048 + (x) * 0x1000) +#define TSI721_OBDMAC_DSSZ_MASK 0x0000000f + +#define TSI721_OBDMAC_DSRP(x) (0x6104c + (x) * 0x1000) +#define TSI721_OBDMAC_DSRP_MASK 0x0007ffff + +#define TSI721_OBDMAC_DSWP(x) (0x61050 + (x) * 0x1000) +#define TSI721_OBDMAC_DSWP_MASK 0x0007ffff + +#define TSI721_RQRPTO 0x60010 +#define TSI721_RQRPTO_MASK 0x00ffffff +#define TSI721_RQRPTO_VAL 400 /* Response TO value */ + +/* + * Inbound Messaging Engine Registers + * x = 0..7 + */ + +#define TSI721_IB_DEVID_GLOBAL 0xffff +#define TSI721_IBDMAC_FQBL(x) (0x61200 + (x) * 0x1000) +#define TSI721_IBDMAC_FQBL_MASK 0xffffffc0 + +#define TSI721_IBDMAC_FQBH(x) (0x61204 + (x) * 0x1000) +#define TSI721_IBDMAC_FQBH_MASK 0xffffffff + +#define TSI721_IBDMAC_FQSZ_ENTRY_INX TSI721_IMSGD_RING_SIZE +#define TSI721_IBDMAC_FQSZ(x) (0x61208 + (x) * 0x1000) +#define TSI721_IBDMAC_FQSZ_MASK 0x0000000f + +#define TSI721_IBDMAC_FQRP(x) (0x6120c + (x) * 0x1000) +#define TSI721_IBDMAC_FQRP_MASK 0x0007ffff + +#define TSI721_IBDMAC_FQWP(x) (0x61210 + (x) * 0x1000) +#define TSI721_IBDMAC_FQWP_MASK 0x0007ffff + +#define TSI721_IBDMAC_FQTH(x) (0x61214 + (x) * 0x1000) +#define TSI721_IBDMAC_FQTH_MASK 0x0007ffff + +#define TSI721_IB_DEVID 0x60020 +#define TSI721_IB_DEVID_MASK 0x0000ffff + +#define TSI721_IBDMAC_CTL(x) (0x61240 + (x) * 0x1000) +#define TSI721_IBDMAC_CTL_MASK 0x00000003 +#define TSI721_IBDMAC_CTL_SUSPEND 0x00000002 +#define TSI721_IBDMAC_CTL_INIT 0x00000001 + +#define TSI721_IBDMAC_STS(x) (0x61244 + (x) * 0x1000) +#define TSI721_IBDMAC_STS_MASK 0x007f0000 +#define TSI721_IBSMAC_STS_ABORT 0x00400000 +#define TSI721_IBSMAC_STS_RUN 0x00200000 +#define TSI721_IBSMAC_STS_CS 0x001f0000 + +#define TSI721_IBDMAC_INT(x) (0x61248 + (x) * 0x1000) +#define TSI721_IBDMAC_INTSET(x) (0x6124c + (x) * 0x1000) +#define TSI721_IBDMAC_INTE(x) (0x61250 + (x) * 0x1000) +#define TSI721_IBDMAC_INT_MASK 0x0000100f +#define TSI721_IBDMAC_INT_SRTO 0x00001000 +#define TSI721_IBDMAC_INT_SUSPENDED 0x00000008 +#define TSI721_IBDMAC_INT_PC_ERROR 0x00000004 +#define TSI721_IBDMAC_INT_FQ_LOW 0x00000002 +#define TSI721_IBDMAC_INT_DQ_RCV 0x00000001 +#define TSI721_IBDMAC_INT_ALL TSI721_IBDMAC_INT_MASK + +#define TSI721_IBDMAC_PWE(x) (0x61254 + (x) * 0x1000) +#define TSI721_IBDMAC_PWE_MASK 0x00001700 +#define TSI721_IBDMAC_PWE_SRTO 0x00001000 +#define TSI721_IBDMAC_PWE_ILL_FMT 0x00000400 +#define TSI721_IBDMAC_PWE_ILL_DEC 0x00000200 +#define TSI721_IBDMAC_PWE_IMP_SP 0x00000100 + +#define TSI721_IBDMAC_DQBL(x) (0x61300 + (x) * 0x1000) +#define TSI721_IBDMAC_DQBL_MASK 0xffffffc0 +#define TSI721_IBDMAC_DQBL_ADDR 0xffffffc0 + +#define TSI721_IBDMAC_DQBH(x) (0x61304 + (x) * 0x1000) +#define TSI721_IBDMAC_DQBH_MASK 0xffffffff + +#define TSI721_IBDMAC_DQRP(x) (0x61308 + (x) * 0x1000) +#define TSI721_IBDMAC_DQRP_MASK 0x0007ffff + +#define TSI721_IBDMAC_DQWR(x) (0x6130c + (x) * 0x1000) +#define TSI721_IBDMAC_DQWR_MASK 0x0007ffff + +#define TSI721_IBDMAC_DQSZ(x) (0x61314 + (x) * 0x1000) +#define TSI721_IBDMAC_DQSZ_MASK 0x0000000f + +/* + * Messaging Engine Interrupts + */ + +#define TSI721_SMSG_PWE 0x6a004 + +#define TSI721_SMSG_INTE 0x6a000 +#define TSI721_SMSG_INT 0x6a008 +#define TSI721_SMSG_INTSET 0x6a010 +#define TSI721_SMSG_INT_MASK 0x0086ffff +#define TSI721_SMSG_INT_UNS_RSP 0x00800000 +#define TSI721_SMSG_INT_ECC_NCOR 0x00040000 +#define TSI721_SMSG_INT_ECC_COR 0x00020000 +#define TSI721_SMSG_INT_ECC_NCOR_CH 0x0000ff00 +#define TSI721_SMSG_INT_ECC_COR_CH 0x000000ff + +#define TSI721_SMSG_ECC_LOG 0x6a014 +#define TSI721_SMSG_ECC_LOG_MASK 0x00070007 +#define TSI721_SMSG_ECC_LOG_ECC_NCOR_M 0x00070000 +#define TSI721_SMSG_ECC_LOG_ECC_COR_M 0x00000007 + +#define TSI721_RETRY_GEN_CNT 0x6a100 +#define TSI721_RETRY_GEN_CNT_MASK 0xffffffff + +#define TSI721_RETRY_RX_CNT 0x6a104 +#define TSI721_RETRY_RX_CNT_MASK 0xffffffff + +#define TSI721_SMSG_ECC_COR_LOG(x) (0x6a300 + (x) * 4) +#define TSI721_SMSG_ECC_COR_LOG_MASK 0x000000ff + +#define TSI721_SMSG_ECC_NCOR(x) (0x6a340 + (x) * 4) +#define TSI721_SMSG_ECC_NCOR_MASK 0x000000ff + +/* + * Block DMA Descriptors + */ + +struct tsi721_dma_desc { + __le32 type_id; + +#define TSI721_DMAD_DEVID 0x0000ffff +#define TSI721_DMAD_CRF 0x00010000 +#define TSI721_DMAD_PRIO 0x00060000 +#define TSI721_DMAD_RTYPE 0x00780000 +#define TSI721_DMAD_IOF 0x08000000 +#define TSI721_DMAD_DTYPE 0xe0000000 + + __le32 bcount; + +#define TSI721_DMAD_BCOUNT1 0x03ffffff /* if DTYPE == 1 */ +#define TSI721_DMAD_BCOUNT2 0x0000000f /* if DTYPE == 2 */ +#define TSI721_DMAD_TT 0x0c000000 +#define TSI721_DMAD_RADDR0 0xc0000000 + + union { + __le32 raddr_lo; /* if DTYPE == (1 || 2) */ + __le32 next_lo; /* if DTYPE == 3 */ + }; + +#define TSI721_DMAD_CFGOFF 0x00ffffff +#define TSI721_DMAD_HOPCNT 0xff000000 + + union { + __le32 raddr_hi; /* if DTYPE == (1 || 2) */ + __le32 next_hi; /* if DTYPE == 3 */ + }; + + union { + struct { /* if DTYPE == 1 */ + __le32 bufptr_lo; + __le32 bufptr_hi; + __le32 s_dist; + __le32 s_size; + } t1; + __le32 data[4]; /* if DTYPE == 2 */ + u32 reserved[4]; /* if DTYPE == 3 */ + }; +} __aligned(32); + +/* + * Inbound Messaging Descriptor + */ +struct tsi721_imsg_desc { + __le32 type_id; + +#define TSI721_IMD_DEVID 0x0000ffff +#define TSI721_IMD_CRF 0x00010000 +#define TSI721_IMD_PRIO 0x00060000 +#define TSI721_IMD_TT 0x00180000 +#define TSI721_IMD_DTYPE 0xe0000000 + + __le32 msg_info; + +#define TSI721_IMD_BCOUNT 0x00000ff8 +#define TSI721_IMD_SSIZE 0x0000f000 +#define TSI721_IMD_LETER 0x00030000 +#define TSI721_IMD_XMBOX 0x003c0000 +#define TSI721_IMD_MBOX 0x00c00000 +#define TSI721_IMD_CS 0x78000000 +#define TSI721_IMD_HO 0x80000000 + + __le32 bufptr_lo; + __le32 bufptr_hi; + u32 reserved[12]; + +} __aligned(64); + +/* + * Outbound Messaging Descriptor + */ +struct tsi721_omsg_desc { + __le32 type_id; + +#define TSI721_OMD_DEVID 0x0000ffff +#define TSI721_OMD_CRF 0x00010000 +#define TSI721_OMD_PRIO 0x00060000 +#define TSI721_OMD_IOF 0x08000000 +#define TSI721_OMD_DTYPE 0xe0000000 +#define TSI721_OMD_RSRVD 0x17f80000 + + __le32 msg_info; + +#define TSI721_OMD_BCOUNT 0x00000ff8 +#define TSI721_OMD_SSIZE 0x0000f000 +#define TSI721_OMD_LETER 0x00030000 +#define TSI721_OMD_XMBOX 0x003c0000 +#define TSI721_OMD_MBOX 0x00c00000 +#define TSI721_OMD_TT 0x0c000000 + + union { + __le32 bufptr_lo; /* if DTYPE == 4 */ + __le32 next_lo; /* if DTYPE == 5 */ + }; + + union { + __le32 bufptr_hi; /* if DTYPE == 4 */ + __le32 next_hi; /* if DTYPE == 5 */ + }; + +} __aligned(16); + +struct tsi721_dma_sts { + __le64 desc_sts[8]; +} __aligned(64); + +struct tsi721_desc_sts_fifo { + union { + __le64 da64; + struct { + __le32 lo; + __le32 hi; + } da32; + } stat[8]; +} __aligned(64); + +/* Descriptor types for BDMA and Messaging blocks */ +enum dma_dtype { + DTYPE1 = 1, /* Data Transfer DMA Descriptor */ + DTYPE2 = 2, /* Immediate Data Transfer DMA Descriptor */ + DTYPE3 = 3, /* Block Pointer DMA Descriptor */ + DTYPE4 = 4, /* Outbound Msg DMA Descriptor */ + DTYPE5 = 5, /* OB Messaging Block Pointer Descriptor */ + DTYPE6 = 6 /* Inbound Messaging Descriptor */ +}; + +enum dma_rtype { + NREAD = 0, + LAST_NWRITE_R = 1, + ALL_NWRITE = 2, + ALL_NWRITE_R = 3, + MAINT_RD = 4, + MAINT_WR = 5 +}; + +/* + * mport Driver Definitions + */ +#define TSI721_DMA_CHNUM TSI721_DMA_MAXCH + +#define TSI721_DMACH_MAINT 0 /* DMA channel for maint requests */ +#define TSI721_DMACH_MAINT_NBD 32 /* Number of BDs for maint requests */ + +#define MSG_DMA_ENTRY_INX_TO_SIZE(x) ((0x10 << (x)) & 0xFFFF0) + +enum tsi721_smsg_int_flag { + SMSG_INT_NONE = 0x00000000, + SMSG_INT_ECC_COR_CH = 0x000000ff, + SMSG_INT_ECC_NCOR_CH = 0x0000ff00, + SMSG_INT_ECC_COR = 0x00020000, + SMSG_INT_ECC_NCOR = 0x00040000, + SMSG_INT_UNS_RSP = 0x00800000, + SMSG_INT_ALL = 0x0006ffff +}; + +/* Structures */ + +struct tsi721_bdma_chan { + int bd_num; /* number of buffer descriptors */ + void *bd_base; /* start of DMA descriptors */ + dma_addr_t bd_phys; + void *sts_base; /* start of DMA BD status FIFO */ + dma_addr_t sts_phys; + int sts_size; +}; + +struct tsi721_imsg_ring { + u32 size; + /* VA/PA of data buffers for incoming messages */ + void *buf_base; + dma_addr_t buf_phys; + /* VA/PA of circular free buffer list */ + void *imfq_base; + dma_addr_t imfq_phys; + /* VA/PA of Inbound message descriptors */ + void *imd_base; + dma_addr_t imd_phys; + /* Inbound Queue buffer pointers */ + void *imq_base[TSI721_IMSGD_RING_SIZE]; + + u32 rx_slot; + void *dev_id; + u32 fq_wrptr; + u32 desc_rdptr; + spinlock_t lock; +}; + +struct tsi721_omsg_ring { + u32 size; + /* VA/PA of OB Msg descriptors */ + void *omd_base; + dma_addr_t omd_phys; + /* VA/PA of OB Msg data buffers */ + void *omq_base[TSI721_OMSGD_RING_SIZE]; + dma_addr_t omq_phys[TSI721_OMSGD_RING_SIZE]; + /* VA/PA of OB Msg descriptor status FIFO */ + void *sts_base; + dma_addr_t sts_phys; + u32 sts_size; /* # of allocated status entries */ + u32 sts_rdptr; + + u32 tx_slot; + void *dev_id; + u32 wr_count; + spinlock_t lock; +}; + +enum tsi721_flags { + TSI721_USING_MSI = (1 << 0), + TSI721_USING_MSIX = (1 << 1), + TSI721_IMSGID_SET = (1 << 2), +}; + +#ifdef CONFIG_PCI_MSI +/* + * MSI-X Table Entries (0 ... 69) + */ +#define TSI721_MSIX_DMACH_DONE(x) (0 + (x)) +#define TSI721_MSIX_DMACH_INT(x) (8 + (x)) +#define TSI721_MSIX_BDMA_INT 16 +#define TSI721_MSIX_OMSG_DONE(x) (17 + (x)) +#define TSI721_MSIX_OMSG_INT(x) (25 + (x)) +#define TSI721_MSIX_IMSG_DQ_RCV(x) (33 + (x)) +#define TSI721_MSIX_IMSG_INT(x) (41 + (x)) +#define TSI721_MSIX_MSG_INT 49 +#define TSI721_MSIX_SR2PC_IDBQ_RCV(x) (50 + (x)) +#define TSI721_MSIX_SR2PC_CH_INT(x) (58 + (x)) +#define TSI721_MSIX_SR2PC_INT 66 +#define TSI721_MSIX_PC2SR_INT 67 +#define TSI721_MSIX_SRIO_MAC_INT 68 +#define TSI721_MSIX_I2C_INT 69 + +/* MSI-X vector and init table entry indexes */ +enum tsi721_msix_vect { + TSI721_VECT_IDB, + TSI721_VECT_PWRX, /* PW_RX is part of SRIO MAC Interrupt reporting */ + TSI721_VECT_OMB0_DONE, + TSI721_VECT_OMB1_DONE, + TSI721_VECT_OMB2_DONE, + TSI721_VECT_OMB3_DONE, + TSI721_VECT_OMB0_INT, + TSI721_VECT_OMB1_INT, + TSI721_VECT_OMB2_INT, + TSI721_VECT_OMB3_INT, + TSI721_VECT_IMB0_RCV, + TSI721_VECT_IMB1_RCV, + TSI721_VECT_IMB2_RCV, + TSI721_VECT_IMB3_RCV, + TSI721_VECT_IMB0_INT, + TSI721_VECT_IMB1_INT, + TSI721_VECT_IMB2_INT, + TSI721_VECT_IMB3_INT, + TSI721_VECT_MAX +}; + +#define IRQ_DEVICE_NAME_MAX 64 + +struct msix_irq { + u16 vector; + char irq_name[IRQ_DEVICE_NAME_MAX]; +}; +#endif /* CONFIG_PCI_MSI */ + +struct tsi721_device { + struct pci_dev *pdev; + struct rio_mport *mport; + u32 flags; + void __iomem *regs; +#ifdef CONFIG_PCI_MSI + struct msix_irq msix[TSI721_VECT_MAX]; +#endif + /* Doorbells */ + void __iomem *odb_base; + void *idb_base; + dma_addr_t idb_dma; + struct work_struct idb_work; + u32 db_discard_count; + + /* Inbound Port-Write */ + struct work_struct pw_work; + struct kfifo pw_fifo; + spinlock_t pw_fifo_lock; + u32 pw_discard_count; + + /* BDMA Engine */ + struct tsi721_bdma_chan bdma[TSI721_DMA_CHNUM]; + + /* Inbound Messaging */ + int imsg_init[TSI721_IMSG_CHNUM]; + struct tsi721_imsg_ring imsg_ring[TSI721_IMSG_CHNUM]; + + /* Outbound Messaging */ + int omsg_init[TSI721_OMSG_CHNUM]; + struct tsi721_omsg_ring omsg_ring[TSI721_OMSG_CHNUM]; +}; + +#endif diff --git a/drivers/rapidio/rio-scan.c b/drivers/rapidio/rio-scan.c index ebe77dd87daf..2bebd791a092 100644 --- a/drivers/rapidio/rio-scan.c +++ b/drivers/rapidio/rio-scan.c @@ -516,7 +516,7 @@ static struct rio_dev __devinit *rio_setup_device(struct rio_net *net, return rdev; cleanup: - if (rio_is_switch(rdev)) + if (rswitch) kfree(rswitch->route_table); kfree(rdev); @@ -923,7 +923,7 @@ static int __devinit rio_enum_peer(struct rio_net *net, struct rio_mport *port, * rio_enum_complete- Tests if enumeration of a network is complete * @port: Master port to send transaction * - * Tests the Component Tag CSR for non-zero value (enumeration + * Tests the PGCCSR discovered bit for non-zero value (enumeration * complete flag). Return %1 if enumeration is complete or %0 if * enumeration is incomplete. */ @@ -933,7 +933,7 @@ static int rio_enum_complete(struct rio_mport *port) rio_local_read_config_32(port, port->phys_efptr + RIO_PORT_GEN_CTL_CSR, ®val); - return (regval & RIO_PORT_GEN_MASTER) ? 1 : 0; + return (regval & RIO_PORT_GEN_DISCOVERED) ? 1 : 0; } /** diff --git a/drivers/rapidio/switches/idt_gen2.c b/drivers/rapidio/switches/idt_gen2.c index 043ee3136e40..809b7a3336ba 100644 --- a/drivers/rapidio/switches/idt_gen2.c +++ b/drivers/rapidio/switches/idt_gen2.c @@ -10,6 +10,7 @@ * option) any later version. */ +#include <linux/stat.h> #include <linux/rio.h> #include <linux/rio_drv.h> #include <linux/rio_ids.h> |