ath10k: add large size for BMI download data for SDIO

Download firmware time cost of SDIO is too long, it is about 480ms,
add large size 2048 bytes for BMI download for SDIO chip, its time
cost will reduced to 240ms.

This will optimize the download firmware time cost.

Tested with QCA6174 SDIO with firmware
WLAN.RMH.4.4.1-00017-QCARMSWP-1.

Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

5 files changed, 66 insertions, 2 deletions

diff --git a/drivers/net/wireless/ath/ath10k/bmi.c b/drivers/net/wireless/ath/ath10k/bmi.c
index 95dc4be82e5c..ea908107581d 100644
--- a/drivers/net/wireless/ath/ath10k/bmi.c
+++ b/drivers/net/wireless/ath/ath10k/bmi.c
@@ -346,6 +346,52 @@ int ath10k_bmi_execute(struct ath10k *ar, u32 address, u32 param, u32 *result)
 	return 0;
 }
 
+static int ath10k_bmi_lz_data_large(struct ath10k *ar, const void *buffer, u32 length)
+{
+	struct bmi_cmd *cmd;
+	u32 hdrlen = sizeof(cmd->id) + sizeof(cmd->lz_data);
+	u32 txlen;
+	int ret;
+	size_t buf_len;
+
+	ath10k_dbg(ar, ATH10K_DBG_BMI, "large bmi lz data buffer 0x%pK length %d\n",
+		   buffer, length);
+
+	if (ar->bmi.done_sent) {
+		ath10k_warn(ar, "command disallowed\n");
+		return -EBUSY;
+	}
+
+	buf_len = sizeof(*cmd) + BMI_MAX_LARGE_DATA_SIZE - BMI_MAX_DATA_SIZE;
+	cmd = kzalloc(buf_len, GFP_KERNEL);
+	if (!cmd)
+		return -ENOMEM;
+
+	while (length) {
+		txlen = min(length, BMI_MAX_LARGE_DATA_SIZE - hdrlen);
+
+		WARN_ON_ONCE(txlen & 3);
+
+		cmd->id          = __cpu_to_le32(BMI_LZ_DATA);
+		cmd->lz_data.len = __cpu_to_le32(txlen);
+		memcpy(cmd->lz_data.payload, buffer, txlen);
+
+		ret = ath10k_hif_exchange_bmi_msg(ar, cmd, hdrlen + txlen,
+						  NULL, NULL);
+		if (ret) {
+			ath10k_warn(ar, "unable to write to the device\n");
+			return ret;
+		}
+
+		buffer += txlen;
+		length -= txlen;
+	}
+
+	kfree(cmd);
+
+	return 0;
+}
+
 int ath10k_bmi_lz_data(struct ath10k *ar, const void *buffer, u32 length)
 {
 	struct bmi_cmd cmd;
@@ -430,7 +476,11 @@ int ath10k_bmi_fast_download(struct ath10k *ar,
 	if (trailer_len > 0)
 		memcpy(trailer, buffer + head_len, trailer_len);
 
-	ret = ath10k_bmi_lz_data(ar, buffer, head_len);
+	if (ar->hw_params.bmi_large_size_download)
+		ret = ath10k_bmi_lz_data_large(ar, buffer, head_len);
+	else
+		ret = ath10k_bmi_lz_data(ar, buffer, head_len);
+
 	if (ret)
 		return ret;
 
diff --git a/drivers/net/wireless/ath/ath10k/bmi.h b/drivers/net/wireless/ath/ath10k/bmi.h
index ef3bdba43bed..f6fadcbdd86e 100644
--- a/drivers/net/wireless/ath/ath10k/bmi.h
+++ b/drivers/net/wireless/ath/ath10k/bmi.h
@@ -45,6 +45,15 @@
 			sizeof(u32) + \
 			sizeof(u32))
 
+/* Maximum data size used for large BMI transfers */
+#define BMI_MAX_LARGE_DATA_SIZE	2048
+
+/* len = cmd + addr + length */
+#define BMI_MAX_LARGE_CMDBUF_SIZE (BMI_MAX_LARGE_DATA_SIZE + \
+			sizeof(u32) + \
+			sizeof(u32) + \
+			sizeof(u32))
+
 /* BMI Commands */
 
 enum bmi_cmd_id {
@@ -258,6 +267,7 @@ int ath10k_bmi_write_memory(struct ath10k *ar, u32 address,
 int ath10k_bmi_execute(struct ath10k *ar, u32 address, u32 param, u32 *result);
 int ath10k_bmi_lz_stream_start(struct ath10k *ar, u32 address);
 int ath10k_bmi_lz_data(struct ath10k *ar, const void *buffer, u32 length);
+
 int ath10k_bmi_fast_download(struct ath10k *ar, u32 address,
 			     const void *buffer, u32 length);
 int ath10k_bmi_read_soc_reg(struct ath10k *ar, u32 address, u32 *reg_val);
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 4f76ba5d78a9..0d345852c04a 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -189,6 +189,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.num_wds_entries = 0x20,
 		.uart_pin_workaround = true,
 		.tx_stats_over_pktlog = false,
+		.bmi_large_size_download = true,
 	},
 	{
 		.id = QCA6174_HW_2_1_VERSION,
diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
index 35a362329a4f..21b7a2a873b0 100644
--- a/drivers/net/wireless/ath/ath10k/hw.h
+++ b/drivers/net/wireless/ath/ath10k/hw.h
@@ -613,6 +613,9 @@ struct ath10k_hw_params {
 	/* target supporting fw download via diag ce */
 	bool fw_diag_ce_download;
 
+	/* target supporting fw download via large size BMI */
+	bool bmi_large_size_download;
+
 	/* need to set uart pin if disable uart print, workaround for a
 	 * firmware bug
 	 */
diff --git a/drivers/net/wireless/ath/ath10k/sdio.c b/drivers/net/wireless/ath/ath10k/sdio.c
index 2bf96e9665cd..3e63adfe3e9c 100644
--- a/drivers/net/wireless/ath/ath10k/sdio.c
+++ b/drivers/net/wireless/ath/ath10k/sdio.c
@@ -2082,7 +2082,7 @@ static int ath10k_sdio_probe(struct sdio_func *func,
 		goto err_core_destroy;
 	}
 
-	ar_sdio->bmi_buf = devm_kzalloc(ar->dev, BMI_MAX_CMDBUF_SIZE, GFP_KERNEL);
+	ar_sdio->bmi_buf = devm_kzalloc(ar->dev, BMI_MAX_LARGE_CMDBUF_SIZE, GFP_KERNEL);
 	if (!ar_sdio->bmi_buf) {
 		ret = -ENOMEM;
 		goto err_core_destroy;