Merge commit 'c039c332f23e794deb6d6f37b9f07ff3b27fb2cf' into md

Pull in pre-requisites for adding raid10 support to dm-raid.

1 files changed, 111 insertions, 0 deletions

diff --git a/drivers/net/wireless/ti/wl18xx/conf.h b/drivers/net/wireless/ti/wl18xx/conf.h
new file mode 100644
index 000000000000..4d426cc20274
--- /dev/null
+++ b/drivers/net/wireless/ti/wl18xx/conf.h
@@ -0,0 +1,111 @@
+/*
+ * This file is part of wl18xx
+ *
+ * Copyright (C) 2011 Texas Instruments Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL18XX_CONF_H__
+#define __WL18XX_CONF_H__
+
+#define WL18XX_CONF_MAGIC	0x10e100ca
+#define WL18XX_CONF_VERSION	(WLCORE_CONF_VERSION | 0x0003)
+#define WL18XX_CONF_MASK	0x0000ffff
+#define WL18XX_CONF_SIZE	(WLCORE_CONF_SIZE + \
+				 sizeof(struct wl18xx_priv_conf))
+
+#define NUM_OF_CHANNELS_11_ABG 150
+#define NUM_OF_CHANNELS_11_P 7
+#define WL18XX_NUM_OF_SUB_BANDS 9
+#define SRF_TABLE_LEN 16
+#define PIN_MUXING_SIZE 2
+
+struct wl18xx_mac_and_phy_params {
+	u8 phy_standalone;
+	u8 rdl;
+	u8 enable_clpc;
+	u8 enable_tx_low_pwr_on_siso_rdl;
+	u8 auto_detect;
+	u8 dedicated_fem;
+
+	u8 low_band_component;
+
+	/* Bit 0: One Hot, Bit 1: Control Enable, Bit 2: 1.8V, Bit 3: 3V */
+	u8 low_band_component_type;
+
+	u8 high_band_component;
+
+	/* Bit 0: One Hot, Bit 1: Control Enable, Bit 2: 1.8V, Bit 3: 3V */
+	u8 high_band_component_type;
+	u8 number_of_assembled_ant2_4;
+	u8 number_of_assembled_ant5;
+	u8 pin_muxing_platform_options[PIN_MUXING_SIZE];
+	u8 external_pa_dc2dc;
+	u8 tcxo_ldo_voltage;
+	u8 xtal_itrim_val;
+	u8 srf_state;
+	u8 srf1[SRF_TABLE_LEN];
+	u8 srf2[SRF_TABLE_LEN];
+	u8 srf3[SRF_TABLE_LEN];
+	u8 io_configuration;
+	u8 sdio_configuration;
+	u8 settings;
+	u8 rx_profile;
+	u8 per_chan_pwr_limit_arr_11abg[NUM_OF_CHANNELS_11_ABG];
+	u8 pwr_limit_reference_11_abg;
+	u8 per_chan_pwr_limit_arr_11p[NUM_OF_CHANNELS_11_P];
+	u8 pwr_limit_reference_11p;
+	u8 per_sub_band_tx_trace_loss[WL18XX_NUM_OF_SUB_BANDS];
+	u8 per_sub_band_rx_trace_loss[WL18XX_NUM_OF_SUB_BANDS];
+	u8 primary_clock_setting_time;
+	u8 clock_valid_on_wake_up;
+	u8 secondary_clock_setting_time;
+	u8 board_type;
+	/* enable point saturation */
+	u8 psat;
+	/* low/medium/high Tx power in dBm */
+	s8 low_power_val;
+	s8 med_power_val;
+	s8 high_power_val;
+	u8 padding[1];
+} __packed;
+
+enum wl18xx_ht_mode {
+	/* Default - use MIMO, fallback to SISO20 */
+	HT_MODE_DEFAULT = 0,
+
+	/* Wide - use SISO40 */
+	HT_MODE_WIDE = 1,
+
+	/* Use SISO20 */
+	HT_MODE_SISO20 = 2,
+};
+
+struct wl18xx_ht_settings {
+	/* DEFAULT / WIDE / SISO20 */
+	u8 mode;
+} __packed;
+
+struct wl18xx_priv_conf {
+	/* Module params structures */
+	struct wl18xx_ht_settings ht;
+
+	/* this structure is copied wholesale to FW */
+	struct wl18xx_mac_and_phy_params phy;
+} __packed;
+
+#endif /* __WL18XX_CONF_H__ */