Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:

 1) BPF debugger and asm tool by Daniel Borkmann.

 2) Speed up create/bind in AF_PACKET, also from Daniel Borkmann.

 3) Correct reciprocal_divide and update users, from Hannes Frederic
    Sowa and Daniel Borkmann.

 4) Currently we only have a "set" operation for the hw timestamp socket
    ioctl, add a "get" operation to match.  From Ben Hutchings.

 5) Add better trace events for debugging driver datapath problems, also
    from Ben Hutchings.

 6) Implement auto corking in TCP, from Eric Dumazet.  Basically, if we
    have a small send and a previous packet is already in the qdisc or
    device queue, defer until TX completion or we get more data.

 7) Allow userspace to manage ipv6 temporary addresses, from Jiri Pirko.

 8) Add a qdisc bypass option for AF_PACKET sockets, from Daniel
    Borkmann.

 9) Share IP header compression code between Bluetooth and IEEE802154
    layers, from Jukka Rissanen.

10) Fix ipv6 router reachability probing, from Jiri Benc.

11) Allow packets to be captured on macvtap devices, from Vlad Yasevich.

12) Support tunneling in GRO layer, from Jerry Chu.

13) Allow bonding to be configured fully using netlink, from Scott
    Feldman.

14) Allow AF_PACKET users to obtain the VLAN TPID, just like they can
    already get the TCI.  From Atzm Watanabe.

15) New "Heavy Hitter" qdisc, from Terry Lam.

16) Significantly improve the IPSEC support in pktgen, from Fan Du.

17) Allow ipv4 tunnels to cache routes, just like sockets.  From Tom
    Herbert.

18) Add Proportional Integral Enhanced packet scheduler, from Vijay
    Subramanian.

19) Allow openvswitch to mmap'd netlink, from Thomas Graf.

20) Key TCP metrics blobs also by source address, not just destination
    address.  From Christoph Paasch.

21) Support 10G in generic phylib.  From Andy Fleming.

22) Try to short-circuit GRO flow compares using device provided RX
    hash, if provided.  From Tom Herbert.

The wireless and netfilter folks have been busy little bees too.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2064 commits)
  net/cxgb4: Fix referencing freed adapter
  ipv6: reallocate addrconf router for ipv6 address when lo device up
  fib_frontend: fix possible NULL pointer dereference
  rtnetlink: remove IFLA_BOND_SLAVE definition
  rtnetlink: remove check for fill_slave_info in rtnl_have_link_slave_info
  qlcnic: update version to 5.3.55
  qlcnic: Enhance logic to calculate msix vectors.
  qlcnic: Refactor interrupt coalescing code for all adapters.
  qlcnic: Update poll controller code path
  qlcnic: Interrupt code cleanup
  qlcnic: Enhance Tx timeout debugging.
  qlcnic: Use bool for rx_mac_learn.
  bonding: fix u64 division
  rtnetlink: add missing IFLA_BOND_AD_INFO_UNSPEC
  sfc: Use the correct maximum TX DMA ring size for SFC9100
  Add Shradha Shah as the sfc driver maintainer.
  net/vxlan: Share RX skb de-marking and checksum checks with ovs
  tulip: cleanup by using ARRAY_SIZE()
  ip_tunnel: clear IPCB in ip_tunnel_xmit() in case dst_link_failure() is called
  net/cxgb4: Don't retrieve stats during recovery
  ...

1 files changed, 12 insertions, 475 deletions

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h
index 899a2ada5b82..939d6b132922 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h
@@ -21,481 +21,33 @@
 #ifndef _BRCMF_H_
 #define _BRCMF_H_
 
-#define BRCMF_VERSION_STR		"4.218.248.5"
-
 #include "fweh.h"
 
-/*******************************************************************************
- * IO codes that are interpreted by dongle firmware
- ******************************************************************************/
-#define BRCMF_C_GET_VERSION			1
-#define BRCMF_C_UP				2
-#define BRCMF_C_DOWN				3
-#define BRCMF_C_SET_PROMISC			10
-#define BRCMF_C_GET_RATE			12
-#define BRCMF_C_GET_INFRA			19
-#define BRCMF_C_SET_INFRA			20
-#define BRCMF_C_GET_AUTH			21
-#define BRCMF_C_SET_AUTH			22
-#define BRCMF_C_GET_BSSID			23
-#define BRCMF_C_GET_SSID			25
-#define BRCMF_C_SET_SSID			26
-#define BRCMF_C_TERMINATED			28
-#define BRCMF_C_GET_CHANNEL			29
-#define BRCMF_C_SET_CHANNEL			30
-#define BRCMF_C_GET_SRL				31
-#define BRCMF_C_SET_SRL				32
-#define BRCMF_C_GET_LRL				33
-#define BRCMF_C_SET_LRL				34
-#define BRCMF_C_GET_RADIO			37
-#define BRCMF_C_SET_RADIO			38
-#define BRCMF_C_GET_PHYTYPE			39
-#define BRCMF_C_SET_KEY				45
-#define BRCMF_C_SET_PASSIVE_SCAN		49
-#define BRCMF_C_SCAN				50
-#define BRCMF_C_SCAN_RESULTS			51
-#define BRCMF_C_DISASSOC			52
-#define BRCMF_C_REASSOC				53
-#define BRCMF_C_SET_ROAM_TRIGGER		55
-#define BRCMF_C_SET_ROAM_DELTA			57
-#define BRCMF_C_GET_BCNPRD			75
-#define BRCMF_C_SET_BCNPRD			76
-#define BRCMF_C_GET_DTIMPRD			77
-#define BRCMF_C_SET_DTIMPRD			78
-#define BRCMF_C_SET_COUNTRY			84
-#define BRCMF_C_GET_PM				85
-#define BRCMF_C_SET_PM				86
-#define BRCMF_C_GET_CURR_RATESET		114
-#define BRCMF_C_GET_AP				117
-#define BRCMF_C_SET_AP				118
-#define BRCMF_C_GET_RSSI			127
-#define BRCMF_C_GET_WSEC			133
-#define BRCMF_C_SET_WSEC			134
-#define BRCMF_C_GET_PHY_NOISE			135
-#define BRCMF_C_GET_BSS_INFO			136
-#define BRCMF_C_GET_BANDLIST			140
-#define BRCMF_C_SET_SCB_TIMEOUT			158
-#define BRCMF_C_GET_PHYLIST			180
-#define BRCMF_C_SET_SCAN_CHANNEL_TIME		185
-#define BRCMF_C_SET_SCAN_UNASSOC_TIME		187
-#define BRCMF_C_SCB_DEAUTHENTICATE_FOR_REASON	201
-#define BRCMF_C_GET_VALID_CHANNELS		217
-#define BRCMF_C_GET_KEY_PRIMARY			235
-#define BRCMF_C_SET_KEY_PRIMARY			236
-#define BRCMF_C_SET_SCAN_PASSIVE_TIME		258
-#define BRCMF_C_GET_VAR				262
-#define BRCMF_C_SET_VAR				263
-
-/* phy types (returned by WLC_GET_PHYTPE) */
-#define	WLC_PHY_TYPE_A		0
-#define	WLC_PHY_TYPE_B		1
-#define	WLC_PHY_TYPE_G		2
-#define	WLC_PHY_TYPE_N		4
-#define	WLC_PHY_TYPE_LP		5
-#define	WLC_PHY_TYPE_SSN	6
-#define	WLC_PHY_TYPE_HT		7
-#define	WLC_PHY_TYPE_LCN	8
-#define	WLC_PHY_TYPE_NULL	0xf
-
 #define TOE_TX_CSUM_OL		0x00000001
 #define TOE_RX_CSUM_OL		0x00000002
 
-#define	BRCMF_BSS_INFO_VERSION	109 /* curr ver of brcmf_bss_info_le struct */
-
-/* size of brcmf_scan_params not including variable length array */
-#define BRCMF_SCAN_PARAMS_FIXED_SIZE 64
-
-/* masks for channel and ssid count */
-#define BRCMF_SCAN_PARAMS_COUNT_MASK 0x0000ffff
-#define BRCMF_SCAN_PARAMS_NSSID_SHIFT 16
-
-/* primary (ie tx) key */
-#define BRCMF_PRIMARY_KEY	(1 << 1)
-
 /* For supporting multiple interfaces */
 #define BRCMF_MAX_IFS	16
 
-#define DOT11_BSSTYPE_ANY			2
 #define DOT11_MAX_DEFAULT_KEYS	4
 
-#define BRCMF_ESCAN_REQ_VERSION 1
-
-#define WLC_BSS_RSSI_ON_CHANNEL		0x0002
-
-#define BRCMF_MAXRATES_IN_SET		16	/* max # of rates in rateset */
-#define BRCMF_STA_ASSOC			0x10		/* Associated */
-
-#define BRCMF_E_STATUS_SUCCESS			0
-#define BRCMF_E_STATUS_FAIL			1
-#define BRCMF_E_STATUS_TIMEOUT			2
-#define BRCMF_E_STATUS_NO_NETWORKS		3
-#define BRCMF_E_STATUS_ABORT			4
-#define BRCMF_E_STATUS_NO_ACK			5
-#define BRCMF_E_STATUS_UNSOLICITED		6
-#define BRCMF_E_STATUS_ATTEMPT			7
-#define BRCMF_E_STATUS_PARTIAL			8
-#define BRCMF_E_STATUS_NEWSCAN			9
-#define BRCMF_E_STATUS_NEWASSOC			10
-#define BRCMF_E_STATUS_11HQUIET			11
-#define BRCMF_E_STATUS_SUPPRESS			12
-#define BRCMF_E_STATUS_NOCHANS			13
-#define BRCMF_E_STATUS_CS_ABORT			15
-#define BRCMF_E_STATUS_ERROR			16
-
-#define BRCMF_E_REASON_INITIAL_ASSOC		0
-#define BRCMF_E_REASON_LOW_RSSI			1
-#define BRCMF_E_REASON_DEAUTH			2
-#define BRCMF_E_REASON_DISASSOC			3
-#define BRCMF_E_REASON_BCNS_LOST		4
-#define BRCMF_E_REASON_MINTXRATE		9
-#define BRCMF_E_REASON_TXFAIL			10
-
-#define BRCMF_E_REASON_LINK_BSSCFG_DIS		4
-#define BRCMF_E_REASON_FAST_ROAM_FAILED		5
-#define BRCMF_E_REASON_DIRECTED_ROAM		6
-#define BRCMF_E_REASON_TSPEC_REJECTED		7
-#define BRCMF_E_REASON_BETTER_AP		8
-
-#define BRCMF_E_PRUNE_ENCR_MISMATCH		1
-#define BRCMF_E_PRUNE_BCAST_BSSID		2
-#define BRCMF_E_PRUNE_MAC_DENY			3
-#define BRCMF_E_PRUNE_MAC_NA			4
-#define BRCMF_E_PRUNE_REG_PASSV			5
-#define BRCMF_E_PRUNE_SPCT_MGMT			6
-#define BRCMF_E_PRUNE_RADAR			7
-#define BRCMF_E_RSN_MISMATCH			8
-#define BRCMF_E_PRUNE_NO_COMMON_RATES		9
-#define BRCMF_E_PRUNE_BASIC_RATES		10
-#define BRCMF_E_PRUNE_CIPHER_NA			12
-#define BRCMF_E_PRUNE_KNOWN_STA			13
-#define BRCMF_E_PRUNE_WDS_PEER			15
-#define BRCMF_E_PRUNE_QBSS_LOAD			16
-#define BRCMF_E_PRUNE_HOME_AP			17
-
-#define BRCMF_E_SUP_OTHER			0
-#define BRCMF_E_SUP_DECRYPT_KEY_DATA		1
-#define BRCMF_E_SUP_BAD_UCAST_WEP128		2
-#define BRCMF_E_SUP_BAD_UCAST_WEP40		3
-#define BRCMF_E_SUP_UNSUP_KEY_LEN		4
-#define BRCMF_E_SUP_PW_KEY_CIPHER		5
-#define BRCMF_E_SUP_MSG3_TOO_MANY_IE		6
-#define BRCMF_E_SUP_MSG3_IE_MISMATCH		7
-#define BRCMF_E_SUP_NO_INSTALL_FLAG		8
-#define BRCMF_E_SUP_MSG3_NO_GTK			9
-#define BRCMF_E_SUP_GRP_KEY_CIPHER		10
-#define BRCMF_E_SUP_GRP_MSG1_NO_GTK		11
-#define BRCMF_E_SUP_GTK_DECRYPT_FAIL		12
-#define BRCMF_E_SUP_SEND_FAIL			13
-#define BRCMF_E_SUP_DEAUTH			14
-
-#define BRCMF_E_IF_ADD				1
-#define BRCMF_E_IF_DEL				2
-#define BRCMF_E_IF_CHANGE			3
-
-#define BRCMF_E_IF_FLAG_NOIF			1
-
-#define BRCMF_E_IF_ROLE_STA			0
-#define BRCMF_E_IF_ROLE_AP			1
-#define BRCMF_E_IF_ROLE_WDS			2
-
-#define BRCMF_E_LINK_BCN_LOSS			1
-#define BRCMF_E_LINK_DISASSOC			2
-#define BRCMF_E_LINK_ASSOC_REC			3
-#define BRCMF_E_LINK_BSSCFG_DIS			4
-
 /* Small, medium and maximum buffer size for dcmd
  */
 #define BRCMF_DCMD_SMLEN	256
 #define BRCMF_DCMD_MEDLEN	1536
 #define BRCMF_DCMD_MAXLEN	8192
 
-#define BRCMF_AMPDU_RX_REORDER_MAXFLOWS		256
-
-/* Pattern matching filter. Specifies an offset within received packets to
- * start matching, the pattern to match, the size of the pattern, and a bitmask
- * that indicates which bits within the pattern should be matched.
- */
-struct brcmf_pkt_filter_pattern_le {
-	/*
-	 * Offset within received packet to start pattern matching.
-	 * Offset '0' is the first byte of the ethernet header.
-	 */
-	__le32 offset;
-	/* Size of the pattern.  Bitmask must be the same size.*/
-	__le32 size_bytes;
-	/*
-	 * Variable length mask and pattern data. mask starts at offset 0.
-	 * Pattern immediately follows mask.
-	 */
-	u8 mask_and_pattern[1];
-};
-
-/* IOVAR "pkt_filter_add" parameter. Used to install packet filters. */
-struct brcmf_pkt_filter_le {
-	__le32 id;		/* Unique filter id, specified by app. */
-	__le32 type;		/* Filter type (WL_PKT_FILTER_TYPE_xxx). */
-	__le32 negate_match;	/* Negate the result of filter matches */
-	union {			/* Filter definitions */
-		struct brcmf_pkt_filter_pattern_le pattern; /* Filter pattern */
-	} u;
-};
-
-/* IOVAR "pkt_filter_enable" parameter. */
-struct brcmf_pkt_filter_enable_le {
-	__le32 id;		/* Unique filter id */
-	__le32 enable;		/* Enable/disable bool */
-};
-
-/* BSS info structure
- * Applications MUST CHECK ie_offset field and length field to access IEs and
- * next bss_info structure in a vector (in struct brcmf_scan_results)
+/* IOCTL from host to device are limited in lenght. A device can only handle
+ * ethernet frame size. This limitation is to be applied by protocol layer.
  */
-struct brcmf_bss_info_le {
-	__le32 version;		/* version field */
-	__le32 length;		/* byte length of data in this record,
-				 * starting at version and including IEs
-				 */
-	u8 BSSID[ETH_ALEN];
-	__le16 beacon_period;	/* units are Kusec */
-	__le16 capability;	/* Capability information */
-	u8 SSID_len;
-	u8 SSID[32];
-	struct {
-		__le32 count;   /* # rates in this set */
-		u8 rates[16]; /* rates in 500kbps units w/hi bit set if basic */
-	} rateset;		/* supported rates */
-	__le16 chanspec;	/* chanspec for bss */
-	__le16 atim_window;	/* units are Kusec */
-	u8 dtim_period;	/* DTIM period */
-	__le16 RSSI;		/* receive signal strength (in dBm) */
-	s8 phy_noise;		/* noise (in dBm) */
-
-	u8 n_cap;		/* BSS is 802.11N Capable */
-	/* 802.11N BSS Capabilities (based on HT_CAP_*): */
-	__le32 nbss_cap;
-	u8 ctl_ch;		/* 802.11N BSS control channel number */
-	__le32 reserved32[1];	/* Reserved for expansion of BSS properties */
-	u8 flags;		/* flags */
-	u8 reserved[3];	/* Reserved for expansion of BSS properties */
-	u8 basic_mcs[MCSSET_LEN];	/* 802.11N BSS required MCS set */
+#define BRCMF_TX_IOCTL_MAX_MSG_SIZE	(ETH_FRAME_LEN+ETH_FCS_LEN)
 
-	__le16 ie_offset;	/* offset at which IEs start, from beginning */
-	__le32 ie_length;	/* byte length of Information Elements */
-	__le16 SNR;		/* average SNR of during frame reception */
-	/* Add new fields here */
-	/* variable length Information Elements */
-};
-
-struct brcm_rateset_le {
-	/* # rates in this set */
-	__le32 count;
-	/* rates in 500kbps units w/hi bit set if basic */
-	u8 rates[BRCMF_MAXRATES_IN_SET];
-};
-
-struct brcmf_ssid {
-	u32 SSID_len;
-	unsigned char SSID[32];
-};
-
-struct brcmf_ssid_le {
-	__le32 SSID_len;
-	unsigned char SSID[32];
-};
-
-struct brcmf_scan_params_le {
-	struct brcmf_ssid_le ssid_le;	/* default: {0, ""} */
-	u8 bssid[ETH_ALEN];	/* default: bcast */
-	s8 bss_type;		/* default: any,
-				 * DOT11_BSSTYPE_ANY/INFRASTRUCTURE/INDEPENDENT
-				 */
-	u8 scan_type;	/* flags, 0 use default */
-	__le32 nprobes;	  /* -1 use default, number of probes per channel */
-	__le32 active_time;	/* -1 use default, dwell time per channel for
-				 * active scanning
-				 */
-	__le32 passive_time;	/* -1 use default, dwell time per channel
-				 * for passive scanning
-				 */
-	__le32 home_time;	/* -1 use default, dwell time for the
-				 * home channel between channel scans
-				 */
-	__le32 channel_num;	/* count of channels and ssids that follow
-				 *
-				 * low half is count of channels in
-				 * channel_list, 0 means default (use all
-				 * available channels)
-				 *
-				 * high half is entries in struct brcmf_ssid
-				 * array that follows channel_list, aligned for
-				 * s32 (4 bytes) meaning an odd channel count
-				 * implies a 2-byte pad between end of
-				 * channel_list and first ssid
-				 *
-				 * if ssid count is zero, single ssid in the
-				 * fixed parameter portion is assumed, otherwise
-				 * ssid in the fixed portion is ignored
-				 */
-	__le16 channel_list[1];	/* list of chanspecs */
-};
-
-struct brcmf_scan_results {
-	u32 buflen;
-	u32 version;
-	u32 count;
-	struct brcmf_bss_info_le bss_info_le[];
-};
-
-struct brcmf_escan_params_le {
-	__le32 version;
-	__le16 action;
-	__le16 sync_id;
-	struct brcmf_scan_params_le params_le;
-};
-
-struct brcmf_escan_result_le {
-	__le32 buflen;
-	__le32 version;
-	__le16 sync_id;
-	__le16 bss_count;
-	struct brcmf_bss_info_le bss_info_le;
-};
-
-#define WL_ESCAN_RESULTS_FIXED_SIZE (sizeof(struct brcmf_escan_result_le) - \
-	sizeof(struct brcmf_bss_info_le))
-
-/* used for association with a specific BSSID and chanspec list */
-struct brcmf_assoc_params_le {
-	/* 00:00:00:00:00:00: broadcast scan */
-	u8 bssid[ETH_ALEN];
-	/* 0: all available channels, otherwise count of chanspecs in
-	 * chanspec_list */
-	__le32 chanspec_num;
-	/* list of chanspecs */
-	__le16 chanspec_list[1];
-};
-
-/* used for join with or without a specific bssid and channel list */
-struct brcmf_join_params {
-	struct brcmf_ssid_le ssid_le;
-	struct brcmf_assoc_params_le params_le;
-};
-
-/* scan params for extended join */
-struct brcmf_join_scan_params_le {
-	u8 scan_type;		/* 0 use default, active or passive scan */
-	__le32 nprobes;		/* -1 use default, nr of probes per channel */
-	__le32 active_time;	/* -1 use default, dwell time per channel for
-				 * active scanning
-				 */
-	__le32 passive_time;	/* -1 use default, dwell time per channel
-				 * for passive scanning
-				 */
-	__le32 home_time;	/* -1 use default, dwell time for the home
-				 * channel between channel scans
-				 */
-};
-
-/* extended join params */
-struct brcmf_ext_join_params_le {
-	struct brcmf_ssid_le ssid_le;	/* {0, ""}: wildcard scan */
-	struct brcmf_join_scan_params_le scan_le;
-	struct brcmf_assoc_params_le assoc_le;
-};
-
-struct brcmf_wsec_key {
-	u32 index;		/* key index */
-	u32 len;		/* key length */
-	u8 data[WLAN_MAX_KEY_LEN];	/* key data */
-	u32 pad_1[18];
-	u32 algo;	/* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */
-	u32 flags;	/* misc flags */
-	u32 pad_2[3];
-	u32 iv_initialized;	/* has IV been initialized already? */
-	u32 pad_3;
-	/* Rx IV */
-	struct {
-		u32 hi;	/* upper 32 bits of IV */
-		u16 lo;	/* lower 16 bits of IV */
-	} rxiv;
-	u32 pad_4[2];
-	u8 ea[ETH_ALEN];	/* per station */
-};
-
-/*
- * dongle requires same struct as above but with fields in little endian order
- */
-struct brcmf_wsec_key_le {
-	__le32 index;		/* key index */
-	__le32 len;		/* key length */
-	u8 data[WLAN_MAX_KEY_LEN];	/* key data */
-	__le32 pad_1[18];
-	__le32 algo;	/* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */
-	__le32 flags;	/* misc flags */
-	__le32 pad_2[3];
-	__le32 iv_initialized;	/* has IV been initialized already? */
-	__le32 pad_3;
-	/* Rx IV */
-	struct {
-		__le32 hi;	/* upper 32 bits of IV */
-		__le16 lo;	/* lower 16 bits of IV */
-	} rxiv;
-	__le32 pad_4[2];
-	u8 ea[ETH_ALEN];	/* per station */
-};
-
-/* Used to get specific STA parameters */
-struct brcmf_scb_val_le {
-	__le32 val;
-	u8 ea[ETH_ALEN];
-};
-
-/* channel encoding */
-struct brcmf_channel_info_le {
-	__le32 hw_channel;
-	__le32 target_channel;
-	__le32 scan_channel;
-};
-
-struct brcmf_sta_info_le {
-	__le16	ver;		/* version of this struct */
-	__le16	len;		/* length in bytes of this structure */
-	__le16	cap;		/* sta's advertised capabilities */
-	__le32	flags;		/* flags defined below */
-	__le32	idle;		/* time since data pkt rx'd from sta */
-	u8	ea[ETH_ALEN];		/* Station address */
-	__le32	count;			/* # rates in this set */
-	u8	rates[BRCMF_MAXRATES_IN_SET];	/* rates in 500kbps units */
-						/* w/hi bit set if basic */
-	__le32	in;		/* seconds elapsed since associated */
-	__le32	listen_interval_inms; /* Min Listen interval in ms for STA */
-	__le32	tx_pkts;	/* # of packets transmitted */
-	__le32	tx_failures;	/* # of packets failed */
-	__le32	rx_ucast_pkts;	/* # of unicast packets received */
-	__le32	rx_mcast_pkts;	/* # of multicast packets received */
-	__le32	tx_rate;	/* Rate of last successful tx frame */
-	__le32	rx_rate;	/* Rate of last successful rx frame */
-	__le32	rx_decrypt_succeeds;	/* # of packet decrypted successfully */
-	__le32	rx_decrypt_failures;	/* # of packet decrypted failed */
-};
-
-struct brcmf_chanspec_list {
-	__le32	count;		/* # of entries */
-	__le32	element[1];	/* variable length uint32 list */
-};
+#define BRCMF_AMPDU_RX_REORDER_MAXFLOWS		256
 
-/*
- * WLC_E_PROBRESP_MSG
- * WLC_E_P2P_PROBREQ_MSG
- * WLC_E_ACTION_FRAME_RX
+/* Length of firmware version string stored for
+ * ethtool driver info which uses 32 bytes as well.
  */
-struct brcmf_rx_mgmt_data {
-	__be16	version;
-	__be16	chanspec;
-	__be32	rssi;
-	__be32	mactime;
-	__be32	rate;
-};
+#define BRCMF_DRIVER_FIRMWARE_VERSION_LEN	32
 
 /* Bus independent dongle command */
 struct brcmf_dcmd {
@@ -535,7 +87,7 @@ struct brcmf_fws_info; /* firmware signalling info */
 struct brcmf_pub {
 	/* Linkage ponters */
 	struct brcmf_bus *bus_if;
-	struct brcmf_proto *prot;
+	struct brcmf_proto *proto;
 	struct brcmf_cfg80211_info *config;
 
 	/* Internal brcmf items */
@@ -544,7 +96,7 @@ struct brcmf_pub {
 	u8 wme_dp;		/* wme discard priority */
 
 	/* Dongle media info */
-	unsigned long drv_version;	/* Version of dongle-resident driver */
+	char fwver[BRCMF_DRIVER_FIRMWARE_VERSION_LEN];
 	u8 mac[ETH_ALEN];		/* MAC address obtained from dongle */
 
 	/* Multicast data packets sent to dongle */
@@ -566,14 +118,6 @@ struct brcmf_pub {
 #endif
 };
 
-struct brcmf_if_event {
-	u8 ifidx;
-	u8 action;
-	u8 flags;
-	u8 bssidx;
-	u8 role;
-};
-
 /* forward declarations */
 struct brcmf_cfg80211_vif;
 struct brcmf_fws_mac_descriptor;
@@ -635,16 +179,6 @@ int brcmf_netdev_wait_pend8021x(struct net_device *ndev);
 /* Return pointer to interface name */
 char *brcmf_ifname(struct brcmf_pub *drvr, int idx);
 
-/* Query dongle */
-int brcmf_proto_cdc_query_dcmd(struct brcmf_pub *drvr, int ifidx, uint cmd,
-			       void *buf, uint len);
-int brcmf_proto_cdc_set_dcmd(struct brcmf_pub *drvr, int ifidx, uint cmd,
-			     void *buf, uint len);
-
-/* Remove any protocol-specific data header. */
-int brcmf_proto_hdrpull(struct brcmf_pub *drvr, bool do_fws, u8 *ifidx,
-			struct sk_buff *rxp);
-
 int brcmf_net_attach(struct brcmf_if *ifp, bool rtnl_locked);
 struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, s32 bssidx, s32 ifidx,
 			      char *name, u8 *mac_addr);
@@ -655,4 +189,7 @@ u32 brcmf_get_chip_info(struct brcmf_if *ifp);
 void brcmf_txfinalize(struct brcmf_pub *drvr, struct sk_buff *txp,
 		      bool success);
 
+/* Sets dongle media info (drv_version, mac address). */
+int brcmf_c_preinit_dcmds(struct brcmf_if *ifp);
+
 #endif				/* _BRCMF_H_ */