ath9k_hw: Add radio retention support for AR9480

Supported calibrations of radio retention table (RTT) are
	- DC offset
	- Filter
	- Peak detect

Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 153 insertions, 0 deletions

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_rtt.c b/drivers/net/wireless/ath/ath9k/ar9003_rtt.c
new file mode 100644
index 000000000000..48803ee9c0d6
--- /dev/null
+++ b/drivers/net/wireless/ath/ath9k/ar9003_rtt.c
@@ -0,0 +1,153 @@
+/*
+ * Copyright (c) 2010-2011 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "hw.h"
+#include "ar9003_phy.h"
+
+#define RTT_RESTORE_TIMEOUT          1000
+#define RTT_ACCESS_TIMEOUT           100
+#define RTT_BAD_VALUE                0x0bad0bad
+
+/*
+ * RTT (Radio Retention Table) hardware implementation information
+ *
+ * There is an internal table (i.e. the rtt) for each chain (or bank).
+ * Each table contains 6 entries and each entry is corresponding to
+ * a specific calibration parameter as depicted below.
+ *  0~2 - DC offset DAC calibration: loop, low, high (offsetI/Q_...)
+ *  3   - Filter cal (filterfc)
+ *  4   - RX gain settings
+ *  5   - Peak detector offset calibration (agc_caldac)
+ */
+
+void ar9003_hw_rtt_enable(struct ath_hw *ah)
+{
+	REG_WRITE(ah, AR_PHY_RTT_CTRL, 1);
+}
+
+void ar9003_hw_rtt_disable(struct ath_hw *ah)
+{
+	REG_WRITE(ah, AR_PHY_RTT_CTRL, 0);
+}
+
+void ar9003_hw_rtt_set_mask(struct ath_hw *ah, u32 rtt_mask)
+{
+	REG_RMW_FIELD(ah, AR_PHY_RTT_CTRL,
+		      AR_PHY_RTT_CTRL_RESTORE_MASK, rtt_mask);
+}
+
+bool ar9003_hw_rtt_force_restore(struct ath_hw *ah)
+{
+	if (!ath9k_hw_wait(ah, AR_PHY_RTT_CTRL,
+			   AR_PHY_RTT_CTRL_FORCE_RADIO_RESTORE,
+			   0, RTT_RESTORE_TIMEOUT))
+		return false;
+
+	REG_RMW_FIELD(ah, AR_PHY_RTT_CTRL,
+		      AR_PHY_RTT_CTRL_FORCE_RADIO_RESTORE, 1);
+
+	if (!ath9k_hw_wait(ah, AR_PHY_RTT_CTRL,
+			   AR_PHY_RTT_CTRL_FORCE_RADIO_RESTORE,
+			   0, RTT_RESTORE_TIMEOUT))
+		return false;
+
+	return true;
+}
+
+static void ar9003_hw_rtt_load_hist_entry(struct ath_hw *ah, u8 chain,
+		u32 index, u32 data28)
+{
+	u32 val;
+
+	val = SM(data28, AR_PHY_RTT_SW_RTT_TABLE_DATA);
+	REG_WRITE(ah, AR_PHY_RTT_TABLE_SW_INTF_1_B(chain), val);
+
+	val = SM(0, AR_PHY_RTT_SW_RTT_TABLE_ACCESS) |
+	      SM(1, AR_PHY_RTT_SW_RTT_TABLE_WRITE) |
+	      SM(index, AR_PHY_RTT_SW_RTT_TABLE_ADDR);
+	REG_WRITE(ah, AR_PHY_RTT_TABLE_SW_INTF_B(chain), val);
+	udelay(1);
+
+	val |= SM(1, AR_PHY_RTT_SW_RTT_TABLE_ACCESS);
+	REG_WRITE(ah, AR_PHY_RTT_TABLE_SW_INTF_B(chain), val);
+	udelay(1);
+
+	if (!ath9k_hw_wait(ah, AR_PHY_RTT_TABLE_SW_INTF_B(chain),
+			   AR_PHY_RTT_SW_RTT_TABLE_ACCESS, 0,
+			   RTT_ACCESS_TIMEOUT))
+		return;
+
+	val &= ~SM(1, AR_PHY_RTT_SW_RTT_TABLE_WRITE);
+	REG_WRITE(ah, AR_PHY_RTT_TABLE_SW_INTF_B(chain), val);
+	udelay(1);
+
+	ath9k_hw_wait(ah, AR_PHY_RTT_TABLE_SW_INTF_B(chain),
+		      AR_PHY_RTT_SW_RTT_TABLE_ACCESS, 0,
+		      RTT_ACCESS_TIMEOUT);
+}
+
+void ar9003_hw_rtt_load_hist(struct ath_hw *ah, u8 chain, u32 *table)
+{
+	int i;
+
+	for (i = 0; i < MAX_RTT_TABLE_ENTRY; i++)
+		ar9003_hw_rtt_load_hist_entry(ah, chain, i, table[i]);
+}
+
+static int ar9003_hw_rtt_fill_hist_entry(struct ath_hw *ah, u8 chain, u32 index)
+{
+	u32 val;
+
+	val = SM(0, AR_PHY_RTT_SW_RTT_TABLE_ACCESS) |
+	      SM(0, AR_PHY_RTT_SW_RTT_TABLE_WRITE) |
+	      SM(index, AR_PHY_RTT_SW_RTT_TABLE_ADDR);
+
+	REG_WRITE(ah, AR_PHY_RTT_TABLE_SW_INTF_B(chain), val);
+	udelay(1);
+
+	val |= SM(1, AR_PHY_RTT_SW_RTT_TABLE_ACCESS);
+	REG_WRITE(ah, AR_PHY_RTT_TABLE_SW_INTF_B(chain), val);
+	udelay(1);
+
+	if (!ath9k_hw_wait(ah, AR_PHY_RTT_TABLE_SW_INTF_B(chain),
+			   AR_PHY_RTT_SW_RTT_TABLE_ACCESS, 0,
+			   RTT_ACCESS_TIMEOUT))
+		return RTT_BAD_VALUE;
+
+	val = REG_READ(ah, AR_PHY_RTT_TABLE_SW_INTF_1_B(chain));
+
+	return val;
+}
+
+void ar9003_hw_rtt_fill_hist(struct ath_hw *ah, u8 chain, u32 *table)
+{
+	int i;
+
+	for (i = 0; i < MAX_RTT_TABLE_ENTRY; i++)
+		table[i] = ar9003_hw_rtt_fill_hist_entry(ah, chain, i);
+}
+
+void ar9003_hw_rtt_clear_hist(struct ath_hw *ah)
+{
+	int i, j;
+
+	for (i = 0; i < AR9300_MAX_CHAINS; i++) {
+		if (!(ah->rxchainmask & (1 << i)))
+			continue;
+		for (j = 0; j < MAX_RTT_TABLE_ENTRY; j++)
+			ar9003_hw_rtt_load_hist_entry(ah, i, j, 0);
+	}
+}