diff options
| author | Sujith Manoharan <c_manoha@qca.qualcomm.com> | 2015-02-16 10:49:56 +0530 |
|---|---|---|
| committer | Kalle Valo <kvalo@codeaurora.org> | 2015-03-03 14:55:19 +0200 |
| commit | e18e164e9af5e80897b0eea19f22ea2a086f36b6 (patch) | |
| tree | e6d55a2f5419e9502311adc1ec3daae327152348 /drivers/net/wireless/ath/ath9k/ar9003_mci.c | |
| parent | d1d07813bb3e2e79c6e8a026d908a3482ebd7a17 (diff) | |
| download | talos-op-linux-e18e164e9af5e80897b0eea19f22ea2a086f36b6.tar.gz talos-op-linux-e18e164e9af5e80897b0eea19f22ea2a086f36b6.zip | |
ath9k: Handle 2-ANT AR9565 in MCI reset
The value programmed in the BTCOEX control register
is different for each chip. This patch adds support
for 2-ANT, 1-ANT solutions based on AR9565.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Diffstat (limited to 'drivers/net/wireless/ath/ath9k/ar9003_mci.c')
| -rw-r--r-- | drivers/net/wireless/ath/ath9k/ar9003_mci.c | 78 |
1 files changed, 62 insertions, 16 deletions
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_mci.c b/drivers/net/wireless/ath/ath9k/ar9003_mci.c index 4aed985a7c61..1a4852815458 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_mci.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_mci.c @@ -821,6 +821,61 @@ static void ar9003_mci_osla_setup(struct ath_hw *ah, bool enable) AR_BTCOEX_CTRL_ONE_STEP_LOOK_AHEAD_EN, 1); } +static void ar9003_mci_set_btcoex_ctrl_9565_1ANT(struct ath_hw *ah) +{ + u32 regval; + + regval = SM(1, AR_BTCOEX_CTRL_AR9462_MODE) | + SM(1, AR_BTCOEX_CTRL_WBTIMER_EN) | + SM(1, AR_BTCOEX_CTRL_PA_SHARED) | + SM(1, AR_BTCOEX_CTRL_LNA_SHARED) | + SM(1, AR_BTCOEX_CTRL_NUM_ANTENNAS) | + SM(1, AR_BTCOEX_CTRL_RX_CHAIN_MASK) | + SM(0, AR_BTCOEX_CTRL_1_CHAIN_ACK) | + SM(0, AR_BTCOEX_CTRL_1_CHAIN_BCN) | + SM(0, AR_BTCOEX_CTRL_ONE_STEP_LOOK_AHEAD_EN); + + REG_RMW_FIELD(ah, AR_BTCOEX_CTRL2, + AR_BTCOEX_CTRL2_TX_CHAIN_MASK, 0x1); + REG_WRITE(ah, AR_BTCOEX_CTRL, regval); +} + +static void ar9003_mci_set_btcoex_ctrl_9565_2ANT(struct ath_hw *ah) +{ + u32 regval; + + regval = SM(1, AR_BTCOEX_CTRL_AR9462_MODE) | + SM(1, AR_BTCOEX_CTRL_WBTIMER_EN) | + SM(0, AR_BTCOEX_CTRL_PA_SHARED) | + SM(0, AR_BTCOEX_CTRL_LNA_SHARED) | + SM(2, AR_BTCOEX_CTRL_NUM_ANTENNAS) | + SM(1, AR_BTCOEX_CTRL_RX_CHAIN_MASK) | + SM(0, AR_BTCOEX_CTRL_1_CHAIN_ACK) | + SM(0, AR_BTCOEX_CTRL_1_CHAIN_BCN) | + SM(0, AR_BTCOEX_CTRL_ONE_STEP_LOOK_AHEAD_EN); + + REG_RMW_FIELD(ah, AR_BTCOEX_CTRL2, + AR_BTCOEX_CTRL2_TX_CHAIN_MASK, 0x0); + REG_WRITE(ah, AR_BTCOEX_CTRL, regval); +} + +static void ar9003_mci_set_btcoex_ctrl_9462(struct ath_hw *ah) +{ + u32 regval; + + regval = SM(1, AR_BTCOEX_CTRL_AR9462_MODE) | + SM(1, AR_BTCOEX_CTRL_WBTIMER_EN) | + SM(1, AR_BTCOEX_CTRL_PA_SHARED) | + SM(1, AR_BTCOEX_CTRL_LNA_SHARED) | + SM(2, AR_BTCOEX_CTRL_NUM_ANTENNAS) | + SM(3, AR_BTCOEX_CTRL_RX_CHAIN_MASK) | + SM(0, AR_BTCOEX_CTRL_1_CHAIN_ACK) | + SM(0, AR_BTCOEX_CTRL_1_CHAIN_BCN) | + SM(0, AR_BTCOEX_CTRL_ONE_STEP_LOOK_AHEAD_EN); + + REG_WRITE(ah, AR_BTCOEX_CTRL, regval); +} + int ar9003_mci_reset(struct ath_hw *ah, bool en_int, bool is_2g, bool is_full_sleep) { @@ -845,26 +900,17 @@ int ar9003_mci_reset(struct ath_hw *ah, bool en_int, bool is_2g, * To avoid MCI state machine be affected by incoming remote MCI msgs, * MCI mode will be enabled later, right before reset the MCI TX and RX. */ - - regval = SM(1, AR_BTCOEX_CTRL_AR9462_MODE) | - SM(1, AR_BTCOEX_CTRL_WBTIMER_EN) | - SM(1, AR_BTCOEX_CTRL_PA_SHARED) | - SM(1, AR_BTCOEX_CTRL_LNA_SHARED) | - SM(0, AR_BTCOEX_CTRL_1_CHAIN_ACK) | - SM(0, AR_BTCOEX_CTRL_1_CHAIN_BCN) | - SM(0, AR_BTCOEX_CTRL_ONE_STEP_LOOK_AHEAD_EN); if (AR_SREV_9565(ah)) { - regval |= SM(1, AR_BTCOEX_CTRL_NUM_ANTENNAS) | - SM(1, AR_BTCOEX_CTRL_RX_CHAIN_MASK); - REG_RMW_FIELD(ah, AR_BTCOEX_CTRL2, - AR_BTCOEX_CTRL2_TX_CHAIN_MASK, 0x1); + u8 ant = MS(mci->config, ATH_MCI_CONFIG_ANT_ARCH); + + if (ant == ATH_MCI_ANT_ARCH_1_ANT_PA_LNA_SHARED) + ar9003_mci_set_btcoex_ctrl_9565_1ANT(ah); + else + ar9003_mci_set_btcoex_ctrl_9565_2ANT(ah); } else { - regval |= SM(2, AR_BTCOEX_CTRL_NUM_ANTENNAS) | - SM(3, AR_BTCOEX_CTRL_RX_CHAIN_MASK); + ar9003_mci_set_btcoex_ctrl_9462(ah); } - REG_WRITE(ah, AR_BTCOEX_CTRL, regval); - if (is_2g && !(mci->config & ATH_MCI_CONFIG_DISABLE_OSLA)) ar9003_mci_osla_setup(ah, true); else |
