summaryrefslogtreecommitdiffstats
path: root/drivers/net/phy/bcm-cygnus.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2019-05-07 22:03:58 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2019-05-07 22:03:58 -0700
commit80f232121b69cc69a31ccb2b38c1665d770b0710 (patch)
tree106263eac4ff03b899df695e00dd11e593e74fe2 /drivers/net/phy/bcm-cygnus.c
parent82efe439599439a5e1e225ce5740e6cfb777a7dd (diff)
parenta9e41a529681b38087c91ebc0bb91e12f510ca2d (diff)
downloadtalos-op-linux-80f232121b69cc69a31ccb2b38c1665d770b0710.tar.gz
talos-op-linux-80f232121b69cc69a31ccb2b38c1665d770b0710.zip
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller: "Highlights: 1) Support AES128-CCM ciphers in kTLS, from Vakul Garg. 2) Add fib_sync_mem to control the amount of dirty memory we allow to queue up between synchronize RCU calls, from David Ahern. 3) Make flow classifier more lockless, from Vlad Buslov. 4) Add PHY downshift support to aquantia driver, from Heiner Kallweit. 5) Add SKB cache for TCP rx and tx, from Eric Dumazet. This reduces contention on SLAB spinlocks in heavy RPC workloads. 6) Partial GSO offload support in XFRM, from Boris Pismenny. 7) Add fast link down support to ethtool, from Heiner Kallweit. 8) Use siphash for IP ID generator, from Eric Dumazet. 9) Pull nexthops even further out from ipv4/ipv6 routes and FIB entries, from David Ahern. 10) Move skb->xmit_more into a per-cpu variable, from Florian Westphal. 11) Improve eBPF verifier speed and increase maximum program size, from Alexei Starovoitov. 12) Eliminate per-bucket spinlocks in rhashtable, and instead use bit spinlocks. From Neil Brown. 13) Allow tunneling with GUE encap in ipvs, from Jacky Hu. 14) Improve link partner cap detection in generic PHY code, from Heiner Kallweit. 15) Add layer 2 encap support to bpf_skb_adjust_room(), from Alan Maguire. 16) Remove SKB list implementation assumptions in SCTP, your's truly. 17) Various cleanups, optimizations, and simplifications in r8169 driver. From Heiner Kallweit. 18) Add memory accounting on TX and RX path of SCTP, from Xin Long. 19) Switch PHY drivers over to use dynamic featue detection, from Heiner Kallweit. 20) Support flow steering without masking in dpaa2-eth, from Ioana Ciocoi. 21) Implement ndo_get_devlink_port in netdevsim driver, from Jiri Pirko. 22) Increase the strict parsing of current and future netlink attributes, also export such policies to userspace. From Johannes Berg. 23) Allow DSA tag drivers to be modular, from Andrew Lunn. 24) Remove legacy DSA probing support, also from Andrew Lunn. 25) Allow ll_temac driver to be used on non-x86 platforms, from Esben Haabendal. 26) Add a generic tracepoint for TX queue timeouts to ease debugging, from Cong Wang. 27) More indirect call optimizations, from Paolo Abeni" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1763 commits) cxgb4: Fix error path in cxgb4_init_module net: phy: improve pause mode reporting in phy_print_status dt-bindings: net: Fix a typo in the phy-mode list for ethernet bindings net: macb: Change interrupt and napi enable order in open net: ll_temac: Improve error message on error IRQ net/sched: remove block pointer from common offload structure net: ethernet: support of_get_mac_address new ERR_PTR error net: usb: smsc: fix warning reported by kbuild test robot staging: octeon-ethernet: Fix of_get_mac_address ERR_PTR check net: dsa: support of_get_mac_address new ERR_PTR error net: dsa: sja1105: Fix status initialization in sja1105_get_ethtool_stats vrf: sit mtu should not be updated when vrf netdev is the link net: dsa: Fix error cleanup path in dsa_init_module l2tp: Fix possible NULL pointer dereference taprio: add null check on sched_nest to avoid potential null pointer dereference net: mvpp2: cls: fix less than zero check on a u32 variable net_sched: sch_fq: handle non connected flows net_sched: sch_fq: do not assume EDT packets are ordered net: hns3: use devm_kcalloc when allocating desc_cb net: hns3: some cleanup for struct hns3_enet_ring ...
Diffstat (limited to 'drivers/net/phy/bcm-cygnus.c')
-rw-r--r--drivers/net/phy/bcm-cygnus.c149
1 files changed, 147 insertions, 2 deletions
diff --git a/drivers/net/phy/bcm-cygnus.c b/drivers/net/phy/bcm-cygnus.c
index ab8e12922bf9..9ccf28b0a04d 100644
--- a/drivers/net/phy/bcm-cygnus.c
+++ b/drivers/net/phy/bcm-cygnus.c
@@ -10,6 +10,10 @@
#include <linux/netdevice.h>
#include <linux/phy.h>
+struct bcm_omega_phy_priv {
+ u64 *stats;
+};
+
/* Broadcom Cygnus Phy specific registers */
#define MII_BCM_CYGNUS_AFE_VDAC_ICTRL_0 0x91E5 /* VDAL Control register */
@@ -121,21 +125,162 @@ static int bcm_cygnus_resume(struct phy_device *phydev)
return genphy_config_aneg(phydev);
}
+static int bcm_omega_config_init(struct phy_device *phydev)
+{
+ u8 count, rev;
+ int ret = 0;
+
+ rev = phydev->phy_id & ~phydev->drv->phy_id_mask;
+
+ pr_info_once("%s: %s PHY revision: 0x%02x\n",
+ phydev_name(phydev), phydev->drv->name, rev);
+
+ /* Dummy read to a register to workaround an issue upon reset where the
+ * internal inverter may not allow the first MDIO transaction to pass
+ * the MDIO management controller and make us return 0xffff for such
+ * reads.
+ */
+ phy_read(phydev, MII_BMSR);
+
+ switch (rev) {
+ case 0x00:
+ ret = bcm_phy_28nm_a0b0_afe_config_init(phydev);
+ break;
+ default:
+ break;
+ }
+
+ if (ret)
+ return ret;
+
+ ret = bcm_phy_downshift_get(phydev, &count);
+ if (ret)
+ return ret;
+
+ /* Only enable EEE if Wirespeed/downshift is disabled */
+ ret = bcm_phy_set_eee(phydev, count == DOWNSHIFT_DEV_DISABLE);
+ if (ret)
+ return ret;
+
+ return bcm_phy_enable_apd(phydev, true);
+}
+
+static int bcm_omega_resume(struct phy_device *phydev)
+{
+ int ret;
+
+ /* Re-apply workarounds coming out suspend/resume */
+ ret = bcm_omega_config_init(phydev);
+ if (ret)
+ return ret;
+
+ /* 28nm Gigabit PHYs come out of reset without any half-duplex
+ * or "hub" compliant advertised mode, fix that. This does not
+ * cause any problems with the PHY library since genphy_config_aneg()
+ * gracefully handles auto-negotiated and forced modes.
+ */
+ return genphy_config_aneg(phydev);
+}
+
+static int bcm_omega_get_tunable(struct phy_device *phydev,
+ struct ethtool_tunable *tuna, void *data)
+{
+ switch (tuna->id) {
+ case ETHTOOL_PHY_DOWNSHIFT:
+ return bcm_phy_downshift_get(phydev, (u8 *)data);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static int bcm_omega_set_tunable(struct phy_device *phydev,
+ struct ethtool_tunable *tuna,
+ const void *data)
+{
+ u8 count = *(u8 *)data;
+ int ret;
+
+ switch (tuna->id) {
+ case ETHTOOL_PHY_DOWNSHIFT:
+ ret = bcm_phy_downshift_set(phydev, count);
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ if (ret)
+ return ret;
+
+ /* Disable EEE advertisement since this prevents the PHY
+ * from successfully linking up, trigger auto-negotiation restart
+ * to let the MAC decide what to do.
+ */
+ ret = bcm_phy_set_eee(phydev, count == DOWNSHIFT_DEV_DISABLE);
+ if (ret)
+ return ret;
+
+ return genphy_restart_aneg(phydev);
+}
+
+static void bcm_omega_get_phy_stats(struct phy_device *phydev,
+ struct ethtool_stats *stats, u64 *data)
+{
+ struct bcm_omega_phy_priv *priv = phydev->priv;
+
+ bcm_phy_get_stats(phydev, priv->stats, stats, data);
+}
+
+static int bcm_omega_probe(struct phy_device *phydev)
+{
+ struct bcm_omega_phy_priv *priv;
+
+ priv = devm_kzalloc(&phydev->mdio.dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ phydev->priv = priv;
+
+ priv->stats = devm_kcalloc(&phydev->mdio.dev,
+ bcm_phy_get_sset_count(phydev), sizeof(u64),
+ GFP_KERNEL);
+ if (!priv->stats)
+ return -ENOMEM;
+
+ return 0;
+}
+
static struct phy_driver bcm_cygnus_phy_driver[] = {
{
.phy_id = PHY_ID_BCM_CYGNUS,
.phy_id_mask = 0xfffffff0,
.name = "Broadcom Cygnus PHY",
- .features = PHY_GBIT_FEATURES,
+ /* PHY_GBIT_FEATURES */
.config_init = bcm_cygnus_config_init,
.ack_interrupt = bcm_phy_ack_intr,
.config_intr = bcm_phy_config_intr,
.suspend = genphy_suspend,
.resume = bcm_cygnus_resume,
-} };
+}, {
+ .phy_id = PHY_ID_BCM_OMEGA,
+ .phy_id_mask = 0xfffffff0,
+ .name = "Broadcom Omega Combo GPHY",
+ /* PHY_GBIT_FEATURES */
+ .flags = PHY_IS_INTERNAL,
+ .config_init = bcm_omega_config_init,
+ .suspend = genphy_suspend,
+ .resume = bcm_omega_resume,
+ .get_tunable = bcm_omega_get_tunable,
+ .set_tunable = bcm_omega_set_tunable,
+ .get_sset_count = bcm_phy_get_sset_count,
+ .get_strings = bcm_phy_get_strings,
+ .get_stats = bcm_omega_get_phy_stats,
+ .probe = bcm_omega_probe,
+}
+};
static struct mdio_device_id __maybe_unused bcm_cygnus_phy_tbl[] = {
{ PHY_ID_BCM_CYGNUS, 0xfffffff0, },
+ { PHY_ID_BCM_OMEGA, 0xfffffff0, },
{ }
};
MODULE_DEVICE_TABLE(mdio, bcm_cygnus_phy_tbl);
OpenPOWER on IntegriCloud