diff options
| author | Stefan Roese <sr@denx.de> | 2012-09-21 01:06:29 +0000 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2012-09-21 14:59:52 -0400 |
| commit | a630844d898ae8a0b4a3db84af061150682e0d3c (patch) | |
| tree | 8317ae037bf24b70c0fa00d560f46c724045ed5d /drivers/net/ethernet/stmicro/stmmac | |
| parent | bf5b30b8a4416de04f1ac1196281ddb318669464 (diff) | |
| download | talos-op-linux-a630844d898ae8a0b4a3db84af061150682e0d3c.tar.gz talos-op-linux-a630844d898ae8a0b4a3db84af061150682e0d3c.zip | |
net/stmmac: Use clk_prepare_enable and clk_disable_unprepare
This patch fixes an issue introduced by commit ID 6a81c26f
[net/stmmac: remove conditional compilation of clk code], which
switched from the internal stmmac_clk_{en}{dis}able calls to
clk_{en}{dis}able. By this, calling clk_prepare and clk_unprepare
was removed.
clk_{un}prepare is mandatory for platforms using common clock framework.
Since these drivers are used by SPEAr platform, which supports common
clock framework, add clk_{un}prepare() support for them. Otherwise
the clocks are not correctly en-/disabled and ethernet support doesn't
work.
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/ethernet/stmicro/stmmac')
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 10 | ||||
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/stmmac_timer.c | 6 |
2 files changed, 8 insertions, 8 deletions
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index c136162e6473..3be88331d17a 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -1066,7 +1066,7 @@ static int stmmac_open(struct net_device *dev) } else priv->tm->enable = 1; #endif - clk_enable(priv->stmmac_clk); + clk_prepare_enable(priv->stmmac_clk); stmmac_check_ether_addr(priv); @@ -1188,7 +1188,7 @@ open_error: if (priv->phydev) phy_disconnect(priv->phydev); - clk_disable(priv->stmmac_clk); + clk_disable_unprepare(priv->stmmac_clk); return ret; } @@ -1246,7 +1246,7 @@ static int stmmac_release(struct net_device *dev) #ifdef CONFIG_STMMAC_DEBUG_FS stmmac_exit_fs(); #endif - clk_disable(priv->stmmac_clk); + clk_disable_unprepare(priv->stmmac_clk); return 0; } @@ -2178,7 +2178,7 @@ int stmmac_suspend(struct net_device *ndev) else { stmmac_set_mac(priv->ioaddr, false); /* Disable clock in case of PWM is off */ - clk_disable(priv->stmmac_clk); + clk_disable_unprepare(priv->stmmac_clk); } spin_unlock_irqrestore(&priv->lock, flags); return 0; @@ -2203,7 +2203,7 @@ int stmmac_resume(struct net_device *ndev) priv->hw->mac->pmt(priv->ioaddr, 0); else /* enable the clk prevously disabled */ - clk_enable(priv->stmmac_clk); + clk_prepare_enable(priv->stmmac_clk); netif_device_attach(ndev); diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_timer.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_timer.c index 197fb8cde1d3..4ccd4e2977b7 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_timer.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_timer.c @@ -97,12 +97,12 @@ static struct clk *timer_clock; static void stmmac_tmu_start(unsigned int new_freq) { clk_set_rate(timer_clock, new_freq); - clk_enable(timer_clock); + clk_prepare_enable(timer_clock); } static void stmmac_tmu_stop(void) { - clk_disable(timer_clock); + clk_disable_unprepare(timer_clock); } int stmmac_open_ext_timer(struct net_device *dev, struct stmmac_timer *tm) @@ -126,7 +126,7 @@ int stmmac_open_ext_timer(struct net_device *dev, struct stmmac_timer *tm) int stmmac_close_ext_timer(void) { - clk_disable(timer_clock); + clk_disable_unprepare(timer_clock); tmu2_unregister_user(); clk_put(timer_clock); return 0; |
