Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Highlights:

   1) Support TX_RING in AF_PACKET TPACKET_V3 mode, from Sowmini
      Varadhan.

   2) Simplify classifier state on sk_buff in order to shrink it a bit.
      From Willem de Bruijn.

   3) Introduce SIPHASH and it's usage for secure sequence numbers and
      syncookies. From Jason A. Donenfeld.

   4) Reduce CPU usage for ICMP replies we are going to limit or
      suppress, from Jesper Dangaard Brouer.

   5) Introduce Shared Memory Communications socket layer, from Ursula
      Braun.

   6) Add RACK loss detection and allow it to actually trigger fast
      recovery instead of just assisting after other algorithms have
      triggered it. From Yuchung Cheng.

   7) Add xmit_more and BQL support to mvneta driver, from Simon Guinot.

   8) skb_cow_data avoidance in esp4 and esp6, from Steffen Klassert.

   9) Export MPLS packet stats via netlink, from Robert Shearman.

  10) Significantly improve inet port bind conflict handling, especially
      when an application is restarted and changes it's setting of
      reuseport. From Josef Bacik.

  11) Implement TX batching in vhost_net, from Jason Wang.

  12) Extend the dummy device so that VF (virtual function) features,
      such as configuration, can be more easily tested. From Phil
      Sutter.

  13) Avoid two atomic ops per page on x86 in bnx2x driver, from Eric
      Dumazet.

  14) Add new bpf MAP, implementing a longest prefix match trie. From
      Daniel Mack.

  15) Packet sample offloading support in mlxsw driver, from Yotam Gigi.

  16) Add new aquantia driver, from David VomLehn.

  17) Add bpf tracepoints, from Daniel Borkmann.

  18) Add support for port mirroring to b53 and bcm_sf2 drivers, from
      Florian Fainelli.

  19) Remove custom busy polling in many drivers, it is done in the core
      networking since 4.5 times. From Eric Dumazet.

  20) Support XDP adjust_head in virtio_net, from John Fastabend.

  21) Fix several major holes in neighbour entry confirmation, from
      Julian Anastasov.

  22) Add XDP support to bnxt_en driver, from Michael Chan.

  23) VXLAN offloads for enic driver, from Govindarajulu Varadarajan.

  24) Add IPVTAP driver (IP-VLAN based tap driver) from Sainath Grandhi.

  25) Support GRO in IPSEC protocols, from Steffen Klassert"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1764 commits)
  Revert "ath10k: Search SMBIOS for OEM board file extension"
  net: socket: fix recvmmsg not returning error from sock_error
  bnxt_en: use eth_hw_addr_random()
  bpf: fix unlocking of jited image when module ronx not set
  arch: add ARCH_HAS_SET_MEMORY config
  net: napi_watchdog() can use napi_schedule_irqoff()
  tcp: Revert "tcp: tcp_probe: use spin_lock_bh()"
  net/hsr: use eth_hw_addr_random()
  net: mvpp2: enable building on 64-bit platforms
  net: mvpp2: switch to build_skb() in the RX path
  net: mvpp2: simplify MVPP2_PRS_RI_* definitions
  net: mvpp2: fix indentation of MVPP2_EXT_GLOBAL_CTRL_DEFAULT
  net: mvpp2: remove unused register definitions
  net: mvpp2: simplify mvpp2_bm_bufs_add()
  net: mvpp2: drop useless fields in mvpp2_bm_pool and related code
  net: mvpp2: remove unused 'tx_skb' field of 'struct mvpp2_tx_queue'
  net: mvpp2: release reference to txq_cpu[] entry after unmapping
  net: mvpp2: handle too large value in mvpp2_rx_time_coal_set()
  net: mvpp2: handle too large value handling in mvpp2_rx_pkts_coal_set()
  net: mvpp2: remove useless arguments in mvpp2_rx_{pkts, time}_coal_set
  ...

1 files changed, 31 insertions, 24 deletions

diff --git a/drivers/net/ethernet/neterion/s2io.c b/drivers/net/ethernet/neterion/s2io.c
index 564f682fa4dc..c5c1d0e0c16f 100644
--- a/drivers/net/ethernet/neterion/s2io.c
+++ b/drivers/net/ethernet/neterion/s2io.c
@@ -2783,7 +2783,7 @@ static int s2io_poll_msix(struct napi_struct *napi, int budget)
 	s2io_chk_rx_buffers(nic, ring);
 
 	if (pkts_processed < budget_org) {
-		napi_complete(napi);
+		napi_complete_done(napi, pkts_processed);
 		/*Re Enable MSI-Rx Vector*/
 		addr = (u8 __iomem *)&bar0->xmsi_mask_reg;
 		addr += 7 - ring->ring_no;
@@ -2817,7 +2817,7 @@ static int s2io_poll_inta(struct napi_struct *napi, int budget)
 			break;
 	}
 	if (pkts_processed < budget_org) {
-		napi_complete(napi);
+		napi_complete_done(napi, pkts_processed);
 		/* Re enable the Rx interrupts for the ring */
 		writeq(0, &bar0->rx_traffic_mask);
 		readl(&bar0->rx_traffic_mask);
@@ -5300,10 +5300,10 @@ static int do_s2io_prog_unicast(struct net_device *dev, u8 *addr)
 }
 
 /**
- * s2io_ethtool_sset - Sets different link parameters.
+ * s2io_ethtool_set_link_ksettings - Sets different link parameters.
  * @sp : private member of the device structure, which is a pointer to the
  * s2io_nic structure.
- * @info: pointer to the structure with parameters given by ethtool to set
+ * @cmd: pointer to the structure with parameters given by ethtool to set
  * link information.
  * Description:
  * The function sets different link parameters provided by the user onto
@@ -5312,13 +5312,14 @@ static int do_s2io_prog_unicast(struct net_device *dev, u8 *addr)
  * 0 on success.
  */
 
-static int s2io_ethtool_sset(struct net_device *dev,
-			     struct ethtool_cmd *info)
+static int
+s2io_ethtool_set_link_ksettings(struct net_device *dev,
+				const struct ethtool_link_ksettings *cmd)
 {
 	struct s2io_nic *sp = netdev_priv(dev);
-	if ((info->autoneg == AUTONEG_ENABLE) ||
-	    (ethtool_cmd_speed(info) != SPEED_10000) ||
-	    (info->duplex != DUPLEX_FULL))
+	if ((cmd->base.autoneg == AUTONEG_ENABLE) ||
+	    (cmd->base.speed != SPEED_10000) ||
+	    (cmd->base.duplex != DUPLEX_FULL))
 		return -EINVAL;
 	else {
 		s2io_close(sp->dev);
@@ -5329,10 +5330,10 @@ static int s2io_ethtool_sset(struct net_device *dev,
 }
 
 /**
- * s2io_ethtol_gset - Return link specific information.
+ * s2io_ethtol_get_link_ksettings - Return link specific information.
  * @sp : private member of the device structure, pointer to the
  *      s2io_nic structure.
- * @info : pointer to the structure with parameters given by ethtool
+ * @cmd : pointer to the structure with parameters given by ethtool
  * to return link information.
  * Description:
  * Returns link specific information like speed, duplex etc.. to ethtool.
@@ -5340,25 +5341,31 @@ static int s2io_ethtool_sset(struct net_device *dev,
  * return 0 on success.
  */
 
-static int s2io_ethtool_gset(struct net_device *dev, struct ethtool_cmd *info)
+static int
+s2io_ethtool_get_link_ksettings(struct net_device *dev,
+				struct ethtool_link_ksettings *cmd)
 {
 	struct s2io_nic *sp = netdev_priv(dev);
-	info->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE);
-	info->advertising = (SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE);
-	info->port = PORT_FIBRE;
 
-	/* info->transceiver */
-	info->transceiver = XCVR_EXTERNAL;
+	ethtool_link_ksettings_zero_link_mode(cmd, supported);
+	ethtool_link_ksettings_add_link_mode(cmd, supported, 10000baseT_Full);
+	ethtool_link_ksettings_add_link_mode(cmd, supported, FIBRE);
+
+	ethtool_link_ksettings_zero_link_mode(cmd, advertising);
+	ethtool_link_ksettings_add_link_mode(cmd, advertising, 10000baseT_Full);
+	ethtool_link_ksettings_add_link_mode(cmd, advertising, FIBRE);
+
+	cmd->base.port = PORT_FIBRE;
 
 	if (netif_carrier_ok(sp->dev)) {
-		ethtool_cmd_speed_set(info, SPEED_10000);
-		info->duplex = DUPLEX_FULL;
+		cmd->base.speed = SPEED_10000;
+		cmd->base.duplex = DUPLEX_FULL;
 	} else {
-		ethtool_cmd_speed_set(info, SPEED_UNKNOWN);
-		info->duplex = DUPLEX_UNKNOWN;
+		cmd->base.speed = SPEED_UNKNOWN;
+		cmd->base.duplex = DUPLEX_UNKNOWN;
 	}
 
-	info->autoneg = AUTONEG_DISABLE;
+	cmd->base.autoneg = AUTONEG_DISABLE;
 	return 0;
 }
 
@@ -6626,8 +6633,6 @@ static int s2io_set_features(struct net_device *dev, netdev_features_t features)
 }
 
 static const struct ethtool_ops netdev_ethtool_ops = {
-	.get_settings = s2io_ethtool_gset,
-	.set_settings = s2io_ethtool_sset,
 	.get_drvinfo = s2io_ethtool_gdrvinfo,
 	.get_regs_len = s2io_ethtool_get_regs_len,
 	.get_regs = s2io_ethtool_gregs,
@@ -6643,6 +6648,8 @@ static const struct ethtool_ops netdev_ethtool_ops = {
 	.set_phys_id = s2io_ethtool_set_led,
 	.get_ethtool_stats = s2io_get_ethtool_stats,
 	.get_sset_count = s2io_get_sset_count,
+	.get_link_ksettings = s2io_ethtool_get_link_ksettings,
+	.set_link_ksettings = s2io_ethtool_set_link_ksettings,
 };
 
 /**