diff options
| author | Kishon Vijay Abraham I <kishon@ti.com> | 2018-04-27 17:17:14 +0530 |
|---|---|---|
| committer | Ulf Hansson <ulf.hansson@linaro.org> | 2018-05-03 09:36:19 +0200 |
| commit | c16bc9a7678a27ece028dcbfea8df2049a65dbec (patch) | |
| tree | a10e422764f1fce70cca5902848bba6cf8695e57 /drivers/mmc | |
| parent | 1d3a2220c2a1ab864caf4a64dee745d287089238 (diff) | |
| download | talos-op-linux-c16bc9a7678a27ece028dcbfea8df2049a65dbec.tar.gz talos-op-linux-c16bc9a7678a27ece028dcbfea8df2049a65dbec.zip | |
mmc: sdhci: Disable 1.8v modes (HS200/HS400/UHS) if controller can't support 1.8v
The SDHCI controller in a SoC might support HS200/HS400 (indicated
using mmc-hs200-1_8v/mmc-hs400-1_8v dt property), but if the board is
modeled such that the IO lines are not connected to 1.8v then
HS200/HS400 cannot be supported. Disable HS200/HS400 if the board
does not have 1.8v connected to the IO lines. Also Disable DDR/UHS in 1.8v
if the IO lines are not connected to 1.8v.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Diffstat (limited to 'drivers/mmc')
| -rw-r--r-- | drivers/mmc/host/sdhci.c | 10 |
1 files changed, 10 insertions, 0 deletions
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 2ededa7f43df..0f3cdca3e769 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -3672,6 +3672,16 @@ int sdhci_setup_host(struct sdhci_host *host) if (host->quirks2 & SDHCI_QUIRK2_NO_1_8_V) { host->caps1 &= ~(SDHCI_SUPPORT_SDR104 | SDHCI_SUPPORT_SDR50 | SDHCI_SUPPORT_DDR50); + /* + * The SDHCI controller in a SoC might support HS200/HS400 + * (indicated using mmc-hs200-1_8v/mmc-hs400-1_8v dt property), + * but if the board is modeled such that the IO lines are not + * connected to 1.8v then HS200/HS400 cannot be supported. + * Disable HS200/HS400 if the board does not have 1.8v connected + * to the IO lines. (Applicable for other modes in 1.8v) + */ + mmc->caps2 &= ~(MMC_CAP2_HSX00_1_8V | MMC_CAP2_HS400_ES); + mmc->caps &= ~(MMC_CAP_1_8V_DDR | MMC_CAP_UHS); } /* Any UHS-I mode in caps implies SDR12 and SDR25 support. */ |
