sdhci-spear: ST SPEAr based SDHCI controller glue

Add a glue layer to support the sdhci driver on the ST SPEAr platform.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Cc: <shiraz.hashim@st.com>
Cc: Linus Walleij <linus.ml.walleij@gmail.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

1 files changed, 298 insertions, 0 deletions

diff --git a/drivers/mmc/host/sdhci-spear.c b/drivers/mmc/host/sdhci-spear.c
new file mode 100644
index 000000000000..d70c54c7b70a
--- /dev/null
+++ b/drivers/mmc/host/sdhci-spear.c
@@ -0,0 +1,298 @@
+/*
+ * drivers/mmc/host/sdhci-spear.c
+ *
+ * Support of SDHCI platform devices for spear soc family
+ *
+ * Copyright (C) 2010 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * Inspired by sdhci-pltfm.c
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/highmem.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/sdhci-spear.h>
+#include <linux/io.h>
+#include "sdhci.h"
+
+struct spear_sdhci {
+	struct clk *clk;
+	struct sdhci_plat_data *data;
+};
+
+/* sdhci ops */
+static struct sdhci_ops sdhci_pltfm_ops = {
+	/* Nothing to do for now. */
+};
+
+/* gpio card detection interrupt handler */
+static irqreturn_t sdhci_gpio_irq(int irq, void *dev_id)
+{
+	struct platform_device *pdev = dev_id;
+	struct sdhci_host *host = platform_get_drvdata(pdev);
+	struct spear_sdhci *sdhci = dev_get_platdata(&pdev->dev);
+	unsigned long gpio_irq_type;
+	int val;
+
+	val = gpio_get_value(sdhci->data->card_int_gpio);
+
+	/* val == 1 -> card removed, val == 0 -> card inserted */
+	/* if card removed - set irq for low level, else vice versa */
+	gpio_irq_type = val ? IRQF_TRIGGER_LOW : IRQF_TRIGGER_HIGH;
+	set_irq_type(irq, gpio_irq_type);
+
+	if (sdhci->data->card_power_gpio >= 0) {
+		if (!sdhci->data->power_always_enb) {
+			/* if card inserted, give power, otherwise remove it */
+			val = sdhci->data->power_active_high ? !val : val ;
+			gpio_set_value(sdhci->data->card_power_gpio, val);
+		}
+	}
+
+	/* inform sdhci driver about card insertion/removal */
+	tasklet_schedule(&host->card_tasklet);
+
+	return IRQ_HANDLED;
+}
+
+static int __devinit sdhci_probe(struct platform_device *pdev)
+{
+	struct sdhci_host *host;
+	struct resource *iomem;
+	struct spear_sdhci *sdhci;
+	int ret;
+
+	BUG_ON(pdev == NULL);
+
+	iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!iomem) {
+		ret = -ENOMEM;
+		dev_dbg(&pdev->dev, "memory resource not defined\n");
+		goto err;
+	}
+
+	if (!request_mem_region(iomem->start, resource_size(iomem),
+				"spear-sdhci")) {
+		ret = -EBUSY;
+		dev_dbg(&pdev->dev, "cannot request region\n");
+		goto err;
+	}
+
+	sdhci = kzalloc(sizeof(*sdhci), GFP_KERNEL);
+	if (!sdhci) {
+		ret = -ENOMEM;
+		dev_dbg(&pdev->dev, "cannot allocate memory for sdhci\n");
+		goto err_kzalloc;
+	}
+
+	/* clk enable */
+	sdhci->clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(sdhci->clk)) {
+		ret = PTR_ERR(sdhci->clk);
+		dev_dbg(&pdev->dev, "Error getting clock\n");
+		goto err_clk_get;
+	}
+
+	ret = clk_enable(sdhci->clk);
+	if (ret) {
+		dev_dbg(&pdev->dev, "Error enabling clock\n");
+		goto err_clk_enb;
+	}
+
+	/* overwrite platform_data */
+	sdhci->data = dev_get_platdata(&pdev->dev);
+	pdev->dev.platform_data = sdhci;
+
+	if (pdev->dev.parent)
+		host = sdhci_alloc_host(pdev->dev.parent, 0);
+	else
+		host = sdhci_alloc_host(&pdev->dev, 0);
+
+	if (IS_ERR(host)) {
+		ret = PTR_ERR(host);
+		dev_dbg(&pdev->dev, "error allocating host\n");
+		goto err_alloc_host;
+	}
+
+	host->hw_name = "sdhci";
+	host->ops = &sdhci_pltfm_ops;
+	host->irq = platform_get_irq(pdev, 0);
+	host->quirks = SDHCI_QUIRK_BROKEN_ADMA;
+
+	host->ioaddr = ioremap(iomem->start, resource_size(iomem));
+	if (!host->ioaddr) {
+		ret = -ENOMEM;
+		dev_dbg(&pdev->dev, "failed to remap registers\n");
+		goto err_ioremap;
+	}
+
+	ret = sdhci_add_host(host);
+	if (ret) {
+		dev_dbg(&pdev->dev, "error adding host\n");
+		goto err_add_host;
+	}
+
+	platform_set_drvdata(pdev, host);
+
+	/*
+	 * It is optional to use GPIOs for sdhci Power control & sdhci card
+	 * interrupt detection. If sdhci->data is NULL, then use original sdhci
+	 * lines otherwise GPIO lines.
+	 * If GPIO is selected for power control, then power should be disabled
+	 * after card removal and should be enabled when card insertion
+	 * interrupt occurs
+	 */
+	if (!sdhci->data)
+		return 0;
+
+	if (sdhci->data->card_power_gpio >= 0) {
+		int val = 0;
+
+		ret = gpio_request(sdhci->data->card_power_gpio, "sdhci");
+		if (ret < 0) {
+			dev_dbg(&pdev->dev, "gpio request fail: %d\n",
+					sdhci->data->card_power_gpio);
+			goto err_pgpio_request;
+		}
+
+		if (sdhci->data->power_always_enb)
+			val = sdhci->data->power_active_high;
+		else
+			val = !sdhci->data->power_active_high;
+
+		ret = gpio_direction_output(sdhci->data->card_power_gpio, val);
+		if (ret) {
+			dev_dbg(&pdev->dev, "gpio set direction fail: %d\n",
+					sdhci->data->card_power_gpio);
+			goto err_pgpio_direction;
+		}
+
+		gpio_set_value(sdhci->data->card_power_gpio, 1);
+	}
+
+	if (sdhci->data->card_int_gpio >= 0) {
+		ret = gpio_request(sdhci->data->card_int_gpio, "sdhci");
+		if (ret < 0) {
+			dev_dbg(&pdev->dev, "gpio request fail: %d\n",
+					sdhci->data->card_int_gpio);
+			goto err_igpio_request;
+		}
+
+		ret = gpio_direction_input(sdhci->data->card_int_gpio);
+		if (ret) {
+			dev_dbg(&pdev->dev, "gpio set direction fail: %d\n",
+					sdhci->data->card_int_gpio);
+			goto err_igpio_direction;
+		}
+		ret = request_irq(gpio_to_irq(sdhci->data->card_int_gpio),
+				sdhci_gpio_irq, IRQF_TRIGGER_LOW,
+				mmc_hostname(host->mmc), pdev);
+		if (ret) {
+			dev_dbg(&pdev->dev, "gpio request irq fail: %d\n",
+					sdhci->data->card_int_gpio);
+			goto err_igpio_request_irq;
+		}
+
+	}
+
+	return 0;
+
+err_igpio_request_irq:
+err_igpio_direction:
+	if (sdhci->data->card_int_gpio >= 0)
+		gpio_free(sdhci->data->card_int_gpio);
+err_igpio_request:
+err_pgpio_direction:
+	if (sdhci->data->card_power_gpio >= 0)
+		gpio_free(sdhci->data->card_power_gpio);
+err_pgpio_request:
+	platform_set_drvdata(pdev, NULL);
+	sdhci_remove_host(host, 1);
+err_add_host:
+	iounmap(host->ioaddr);
+err_ioremap:
+	sdhci_free_host(host);
+err_alloc_host:
+	clk_disable(sdhci->clk);
+err_clk_enb:
+	clk_put(sdhci->clk);
+err_clk_get:
+	kfree(sdhci);
+err_kzalloc:
+	release_mem_region(iomem->start, resource_size(iomem));
+err:
+	dev_err(&pdev->dev, "spear-sdhci probe failed: %d\n", ret);
+	return ret;
+}
+
+static int __devexit sdhci_remove(struct platform_device *pdev)
+{
+	struct sdhci_host *host = platform_get_drvdata(pdev);
+	struct resource *iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	struct spear_sdhci *sdhci = dev_get_platdata(&pdev->dev);
+	int dead;
+	u32 scratch;
+
+	if (sdhci->data) {
+		if (sdhci->data->card_int_gpio >= 0) {
+			free_irq(gpio_to_irq(sdhci->data->card_int_gpio), pdev);
+			gpio_free(sdhci->data->card_int_gpio);
+		}
+
+		if (sdhci->data->card_power_gpio >= 0)
+			gpio_free(sdhci->data->card_power_gpio);
+	}
+
+	platform_set_drvdata(pdev, NULL);
+	dead = 0;
+	scratch = readl(host->ioaddr + SDHCI_INT_STATUS);
+	if (scratch == (u32)-1)
+		dead = 1;
+
+	sdhci_remove_host(host, dead);
+	iounmap(host->ioaddr);
+	sdhci_free_host(host);
+	clk_disable(sdhci->clk);
+	clk_put(sdhci->clk);
+	kfree(sdhci);
+	if (iomem)
+		release_mem_region(iomem->start, resource_size(iomem));
+
+	return 0;
+}
+
+static struct platform_driver sdhci_driver = {
+	.driver = {
+		.name	= "sdhci",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= sdhci_probe,
+	.remove		= __devexit_p(sdhci_remove),
+};
+
+static int __init sdhci_init(void)
+{
+	return platform_driver_register(&sdhci_driver);
+}
+module_init(sdhci_init);
+
+static void __exit sdhci_exit(void)
+{
+	platform_driver_unregister(&sdhci_driver);
+}
+module_exit(sdhci_exit);
+
+MODULE_DESCRIPTION("SPEAr Secure Digital Host Controller Interface driver");
+MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
+MODULE_LICENSE("GPL v2");