Merge branch 'driver-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6

* 'driver-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (50 commits)
  printk: do not mangle valid userspace syslog prefixes
  efivars: Add Documentation
  efivars: Expose efivars functionality to external drivers.
  efivars: Parameterize operations.
  efivars: Split out variable registration
  efivars: parameterize efivars
  efivars: Make efivars bin_attributes dynamic
  efivars: move efivars globals into struct efivars
  drivers:misc: ti-st: fix debugging code
  kref: Fix typo in kref documentation
  UIO: add PRUSS UIO driver support
  Fix spelling mistakes in Documentation/zh_CN/SubmittingPatches
  firmware: Fix unaligned memory accesses in dmi-sysfs
  firmware: Add documentation for /sys/firmware/dmi
  firmware: Expose DMI type 15 System Event Log
  firmware: Break out system_event_log in dmi-sysfs
  firmware: Basic dmi-sysfs support
  firmware: Add DMI entry types to the headers
  Driver core: convert platform_{get,set}_drvdata to static inline functions
  Translate linux-2.6/Documentation/magic-number.txt into Chinese
  ...

5 files changed, 448 insertions, 548 deletions

diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index cc8e49db45fe..b7d5ef234ac9 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -441,7 +441,7 @@ config BMP085
 	  module will be called bmp085.
 
 config PCH_PHUB
-	tristate "PCH Packet Hub of Intel Topcliff"
+	tristate "PCH Packet Hub of Intel Topcliff / OKI SEMICONDUCTOR ML7213"
 	depends on PCI
 	help
 	  This driver is for PCH(Platform controller Hub) PHUB(Packet Hub) of
@@ -449,6 +449,11 @@ config PCH_PHUB
 	  processor. The Topcliff has MAC address and Option ROM data in SROM.
 	  This driver can access MAC address and Option ROM data in SROM.
 
+	  This driver also can be used for OKI SEMICONDUCTOR's ML7213 which is
+	  for IVI(In-Vehicle Infotainment) use.
+	  ML7213 is companion chip for Intel Atom E6xx series.
+	  ML7213 is completely compatible for Intel EG20T PCH.
+
 	  To compile this driver as a module, choose M here: the module will
 	  be called pch_phub.
 
diff --git a/drivers/misc/pch_phub.c b/drivers/misc/pch_phub.c
index 744b804aca15..98bffc471b17 100644
--- a/drivers/misc/pch_phub.c
+++ b/drivers/misc/pch_phub.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2010 OKI SEMICONDUCTOR Co., LTD.
+ * Copyright (C) 2010 OKI SEMICONDUCTOR CO., LTD.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -33,7 +33,12 @@
 #define PHUB_TIMEOUT 0x05		/* Time out value for Status Register */
 #define PCH_PHUB_ROM_WRITE_ENABLE 0x01	/* Enabling for writing ROM */
 #define PCH_PHUB_ROM_WRITE_DISABLE 0x00	/* Disabling for writing ROM */
-#define PCH_PHUB_ROM_START_ADDR 0x14	/* ROM data area start address offset */
+#define PCH_PHUB_MAC_START_ADDR 0x20C  /* MAC data area start address offset */
+#define PCH_PHUB_ROM_START_ADDR_EG20T 0x14 /* ROM data area start address offset
+					      (Intel EG20T PCH)*/
+#define PCH_PHUB_ROM_START_ADDR_ML7213 0x400 /* ROM data area start address
+						offset(OKI SEMICONDUCTOR ML7213)
+					      */
 
 /* MAX number of INT_REDUCE_CONTROL registers */
 #define MAX_NUM_INT_REDUCE_CONTROL_REG 128
@@ -42,6 +47,10 @@
 #define CLKCFG_CAN_50MHZ 0x12000000
 #define CLKCFG_CANCLK_MASK 0xFF000000
 
+/* Macros for ML7213 */
+#define PCI_VENDOR_ID_ROHM			0x10db
+#define PCI_DEVICE_ID_ROHM_ML7213_PHUB		0x801A
+
 /* SROM ACCESS Macro */
 #define PCH_WORD_ADDR_MASK (~((1 << 2) - 1))
 
@@ -298,7 +307,7 @@ static void pch_phub_read_serial_rom_val(struct pch_phub_reg *chip,
 {
 	unsigned int mem_addr;
 
-	mem_addr = PCH_PHUB_ROM_START_ADDR +
+	mem_addr = PCH_PHUB_ROM_START_ADDR_EG20T +
 			pch_phub_mac_offset[offset_address];
 
 	pch_phub_read_serial_rom(chip, mem_addr, data);
@@ -315,7 +324,7 @@ static int pch_phub_write_serial_rom_val(struct pch_phub_reg *chip,
 	int retval;
 	unsigned int mem_addr;
 
-	mem_addr = PCH_PHUB_ROM_START_ADDR +
+	mem_addr = PCH_PHUB_ROM_START_ADDR_EG20T +
 			pch_phub_mac_offset[offset_address];
 
 	retval = pch_phub_write_serial_rom(chip, mem_addr, data);
@@ -594,23 +603,38 @@ static int __devinit pch_phub_probe(struct pci_dev *pdev,
 		"pch_phub_extrom_base_address variable is %p\n", __func__,
 		chip->pch_phub_extrom_base_address);
 
-	pci_set_drvdata(pdev, chip);
-
-	retval = sysfs_create_file(&pdev->dev.kobj, &dev_attr_pch_mac.attr);
-	if (retval)
-		goto err_sysfs_create;
-
-	retval = sysfs_create_bin_file(&pdev->dev.kobj, &pch_bin_attr);
-	if (retval)
-		goto exit_bin_attr;
-
-	pch_phub_read_modify_write_reg(chip, (unsigned int)CLKCFG_REG_OFFSET,
-					CLKCFG_CAN_50MHZ, CLKCFG_CANCLK_MASK);
+	if (id->driver_data == 1) {
+		retval = sysfs_create_file(&pdev->dev.kobj,
+					   &dev_attr_pch_mac.attr);
+		if (retval)
+			goto err_sysfs_create;
 
-	/* set the prefech value */
-	iowrite32(0x000affaa, chip->pch_phub_base_address + 0x14);
-	/* set the interrupt delay value */
-	iowrite32(0x25, chip->pch_phub_base_address + 0x44);
+		retval = sysfs_create_bin_file(&pdev->dev.kobj, &pch_bin_attr);
+		if (retval)
+			goto exit_bin_attr;
+
+		pch_phub_read_modify_write_reg(chip,
+					       (unsigned int)CLKCFG_REG_OFFSET,
+					       CLKCFG_CAN_50MHZ,
+					       CLKCFG_CANCLK_MASK);
+
+		/* set the prefech value */
+		iowrite32(0x000affaa, chip->pch_phub_base_address + 0x14);
+		/* set the interrupt delay value */
+		iowrite32(0x25, chip->pch_phub_base_address + 0x44);
+	} else if (id->driver_data == 2) {
+		retval = sysfs_create_bin_file(&pdev->dev.kobj, &pch_bin_attr);
+		if (retval)
+			goto err_sysfs_create;
+		/* set the prefech value
+		 * Device2(USB OHCI #1/ USB EHCI #1/ USB Device):a
+		 * Device4(SDIO #0,1,2):f
+		 * Device6(SATA 2):f
+		 * Device8(USB OHCI #0/ USB EHCI #0):a
+		 */
+		iowrite32(0x000affa0, chip->pch_phub_base_address + 0x14);
+	}
+	pci_set_drvdata(pdev, chip);
 
 	return 0;
 exit_bin_attr:
@@ -687,8 +711,9 @@ static int pch_phub_resume(struct pci_dev *pdev)
 #endif /* CONFIG_PM */
 
 static struct pci_device_id pch_phub_pcidev_id[] = {
-	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_PCH1_PHUB)},
-	{0,}
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_PCH1_PHUB),       1,  },
+	{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ROHM_ML7213_PHUB), 2,  },
+	{ }
 };
 
 static struct pci_driver pch_phub_driver = {
diff --git a/drivers/misc/ti-st/st_core.c b/drivers/misc/ti-st/st_core.c
index f9aad06d1ae5..486117f72c9f 100644
--- a/drivers/misc/ti-st/st_core.c
+++ b/drivers/misc/ti-st/st_core.c
@@ -25,10 +25,9 @@
 #include <linux/init.h>
 #include <linux/tty.h>
 
-/* understand BT, FM and GPS for now */
-#include <net/bluetooth/bluetooth.h>
-#include <net/bluetooth/hci_core.h>
-#include <net/bluetooth/hci.h>
+#include <linux/seq_file.h>
+#include <linux/skbuff.h>
+
 #include <linux/ti_wilink_st.h>
 
 /* function pointer pointing to either,
@@ -38,21 +37,38 @@
 void (*st_recv) (void*, const unsigned char*, long);
 
 /********************************************************************/
-#if 0
-/* internal misc functions */
-bool is_protocol_list_empty(void)
+static void add_channel_to_table(struct st_data_s *st_gdata,
+		struct st_proto_s *new_proto)
 {
-	unsigned char i = 0;
-	pr_debug(" %s ", __func__);
-	for (i = 0; i < ST_MAX; i++) {
-		if (st_gdata->list[i] != NULL)
-			return ST_NOTEMPTY;
-		/* not empty */
+	pr_info("%s: id %d\n", __func__, new_proto->chnl_id);
+	/* list now has the channel id as index itself */
+	st_gdata->list[new_proto->chnl_id] = new_proto;
+}
+
+static void remove_channel_from_table(struct st_data_s *st_gdata,
+		struct st_proto_s *proto)
+{
+	pr_info("%s: id %d\n", __func__, proto->chnl_id);
+	st_gdata->list[proto->chnl_id] = NULL;
+}
+
+/*
+ * called from KIM during firmware download.
+ *
+ * This is a wrapper function to tty->ops->write_room.
+ * It returns number of free space available in
+ * uart tx buffer.
+ */
+int st_get_uart_wr_room(struct st_data_s *st_gdata)
+{
+	struct tty_struct *tty;
+	if (unlikely(st_gdata == NULL || st_gdata->tty == NULL)) {
+		pr_err("tty unavailable to perform write");
+		return -1;
 	}
-	/* list empty */
-	return ST_EMPTY;
+	tty = st_gdata->tty;
+	return tty->ops->write_room(tty);
 }
-#endif
 
 /* can be called in from
  * -- KIM (during fw download)
@@ -67,7 +83,7 @@ int st_int_write(struct st_data_s *st_gdata,
 	struct tty_struct *tty;
 	if (unlikely(st_gdata == NULL || st_gdata->tty == NULL)) {
 		pr_err("tty unavailable to perform write");
-		return -1;
+		return -EINVAL;
 	}
 	tty = st_gdata->tty;
 #ifdef VERBOSE
@@ -82,15 +98,15 @@ int st_int_write(struct st_data_s *st_gdata,
  * push the skb received to relevant
  * protocol stacks
  */
-void st_send_frame(enum proto_type protoid, struct st_data_s *st_gdata)
+void st_send_frame(unsigned char chnl_id, struct st_data_s *st_gdata)
 {
-	pr_info(" %s(prot:%d) ", __func__, protoid);
+	pr_debug(" %s(prot:%d) ", __func__, chnl_id);
 
 	if (unlikely
 	    (st_gdata == NULL || st_gdata->rx_skb == NULL
-	     || st_gdata->list[protoid] == NULL)) {
-		pr_err("protocol %d not registered, no data to send?",
-			   protoid);
+	     || st_gdata->list[chnl_id] == NULL)) {
+		pr_err("chnl_id %d not registered, no data to send?",
+			   chnl_id);
 		kfree_skb(st_gdata->rx_skb);
 		return;
 	}
@@ -99,17 +115,17 @@ void st_send_frame(enum proto_type protoid, struct st_data_s *st_gdata)
 	 * - should be just skb_queue_tail for the
 	 *   protocol stack driver
 	 */
-	if (likely(st_gdata->list[protoid]->recv != NULL)) {
+	if (likely(st_gdata->list[chnl_id]->recv != NULL)) {
 		if (unlikely
-			(st_gdata->list[protoid]->recv
-			(st_gdata->list[protoid]->priv_data, st_gdata->rx_skb)
+			(st_gdata->list[chnl_id]->recv
+			(st_gdata->list[chnl_id]->priv_data, st_gdata->rx_skb)
 			     != 0)) {
-			pr_err(" proto stack %d's ->recv failed", protoid);
+			pr_err(" proto stack %d's ->recv failed", chnl_id);
 			kfree_skb(st_gdata->rx_skb);
 			return;
 		}
 	} else {
-		pr_err(" proto stack %d's ->recv null", protoid);
+		pr_err(" proto stack %d's ->recv null", chnl_id);
 		kfree_skb(st_gdata->rx_skb);
 	}
 	return;
@@ -124,16 +140,22 @@ void st_reg_complete(struct st_data_s *st_gdata, char err)
 {
 	unsigned char i = 0;
 	pr_info(" %s ", __func__);
-	for (i = 0; i < ST_MAX; i++) {
+	for (i = 0; i < ST_MAX_CHANNELS; i++) {
 		if (likely(st_gdata != NULL && st_gdata->list[i] != NULL &&
-			   st_gdata->list[i]->reg_complete_cb != NULL))
+			   st_gdata->list[i]->reg_complete_cb != NULL)) {
 			st_gdata->list[i]->reg_complete_cb
 				(st_gdata->list[i]->priv_data, err);
+			pr_info("protocol %d's cb sent %d\n", i, err);
+			if (err) { /* cleanup registered protocol */
+				st_gdata->protos_registered--;
+				st_gdata->list[i] = NULL;
+			}
+		}
 	}
 }
 
 static inline int st_check_data_len(struct st_data_s *st_gdata,
-	int protoid, int len)
+	unsigned char chnl_id, int len)
 {
 	int room = skb_tailroom(st_gdata->rx_skb);
 
@@ -144,7 +166,7 @@ static inline int st_check_data_len(struct st_data_s *st_gdata,
 		 * has zero length payload. So, ask ST CORE to
 		 * forward the packet to protocol driver (BT/FM/GPS)
 		 */
-		st_send_frame(protoid, st_gdata);
+		st_send_frame(chnl_id, st_gdata);
 
 	} else if (len > room) {
 		/* Received packet's payload length is larger.
@@ -157,7 +179,7 @@ static inline int st_check_data_len(struct st_data_s *st_gdata,
 		/* Packet header has non-zero payload length and
 		 * we have enough space in created skb. Lets read
 		 * payload data */
-		st_gdata->rx_state = ST_BT_W4_DATA;
+		st_gdata->rx_state = ST_W4_DATA;
 		st_gdata->rx_count = len;
 		return len;
 	}
@@ -167,6 +189,7 @@ static inline int st_check_data_len(struct st_data_s *st_gdata,
 	st_gdata->rx_state = ST_W4_PACKET_TYPE;
 	st_gdata->rx_skb = NULL;
 	st_gdata->rx_count = 0;
+	st_gdata->rx_chnl = 0;
 
 	return 0;
 }
@@ -208,14 +231,12 @@ void st_int_recv(void *disc_data,
 	const unsigned char *data, long count)
 {
 	char *ptr;
-	struct hci_event_hdr *eh;
-	struct hci_acl_hdr *ah;
-	struct hci_sco_hdr *sh;
-	struct fm_event_hdr *fm;
-	struct gps_event_hdr *gps;
-	int len = 0, type = 0, dlen = 0;
-	static enum proto_type protoid = ST_MAX;
+	struct st_proto_s *proto;
+	unsigned short payload_len = 0;
+	int len = 0, type = 0;
+	unsigned char *plen;
 	struct st_data_s *st_gdata = (struct st_data_s *)disc_data;
+	unsigned long flags;
 
 	ptr = (char *)data;
 	/* tty_receive sent null ? */
@@ -224,10 +245,11 @@ void st_int_recv(void *disc_data,
 		return;
 	}
 
-	pr_info("count %ld rx_state %ld"
+	pr_debug("count %ld rx_state %ld"
 		   "rx_count %ld", count, st_gdata->rx_state,
 		   st_gdata->rx_count);
 
+	spin_lock_irqsave(&st_gdata->lock, flags);
 	/* Decode received bytes here */
 	while (count) {
 		if (st_gdata->rx_count) {
@@ -242,64 +264,36 @@ void st_int_recv(void *disc_data,
 
 			/* Check ST RX state machine , where are we? */
 			switch (st_gdata->rx_state) {
-
-				/* Waiting for complete packet ? */
-			case ST_BT_W4_DATA:
+			/* Waiting for complete packet ? */
+			case ST_W4_DATA:
 				pr_debug("Complete pkt received");
-
 				/* Ask ST CORE to forward
 				 * the packet to protocol driver */
-				st_send_frame(protoid, st_gdata);
+				st_send_frame(st_gdata->rx_chnl, st_gdata);
 
 				st_gdata->rx_state = ST_W4_PACKET_TYPE;
 				st_gdata->rx_skb = NULL;
-				protoid = ST_MAX;	/* is this required ? */
 				continue;
-
-				/* Waiting for Bluetooth event header ? */
-			case ST_BT_W4_EVENT_HDR:
-				eh = (struct hci_event_hdr *)st_gdata->rx_skb->
-				    data;
-
-				pr_debug("Event header: evt 0x%2.2x"
-					   "plen %d", eh->evt, eh->plen);
-
-				st_check_data_len(st_gdata, protoid, eh->plen);
-				continue;
-
-				/* Waiting for Bluetooth acl header ? */
-			case ST_BT_W4_ACL_HDR:
-				ah = (struct hci_acl_hdr *)st_gdata->rx_skb->
-				    data;
-				dlen = __le16_to_cpu(ah->dlen);
-
-				pr_info("ACL header: dlen %d", dlen);
-
-				st_check_data_len(st_gdata, protoid, dlen);
-				continue;
-
-				/* Waiting for Bluetooth sco header ? */
-			case ST_BT_W4_SCO_HDR:
-				sh = (struct hci_sco_hdr *)st_gdata->rx_skb->
-				    data;
-
-				pr_info("SCO header: dlen %d", sh->dlen);
-
-				st_check_data_len(st_gdata, protoid, sh->dlen);
-				continue;
-			case ST_FM_W4_EVENT_HDR:
-				fm = (struct fm_event_hdr *)st_gdata->rx_skb->
-				    data;
-				pr_info("FM Header: ");
-				st_check_data_len(st_gdata, ST_FM, fm->plen);
-				continue;
-				/* TODO : Add GPS packet machine logic here */
-			case ST_GPS_W4_EVENT_HDR:
-				/* [0x09 pkt hdr][R/W byte][2 byte len] */
-				gps = (struct gps_event_hdr *)st_gdata->rx_skb->
-				     data;
-				pr_info("GPS Header: ");
-				st_check_data_len(st_gdata, ST_GPS, gps->plen);
+			/* parse the header to know details */
+			case ST_W4_HEADER:
+				proto = st_gdata->list[st_gdata->rx_chnl];
+				plen =
+				&st_gdata->rx_skb->data
+				[proto->offset_len_in_hdr];
+				pr_debug("plen pointing to %x\n", *plen);
+				if (proto->len_size == 1)/* 1 byte len field */
+					payload_len = *(unsigned char *)plen;
+				else if (proto->len_size == 2)
+					payload_len =
+					__le16_to_cpu(*(unsigned short *)plen);
+				else
+					pr_info("%s: invalid length "
+					"for id %d\n",
+					__func__, proto->chnl_id);
+				st_check_data_len(st_gdata, proto->chnl_id,
+						payload_len);
+				pr_debug("off %d, pay len %d\n",
+					proto->offset_len_in_hdr, payload_len);
 				continue;
 			}	/* end of switch rx_state */
 		}
@@ -308,123 +302,56 @@ void st_int_recv(void *disc_data,
 		/* Check first byte of packet and identify module
 		 * owner (BT/FM/GPS) */
 		switch (*ptr) {
-
-			/* Bluetooth event packet? */
-		case HCI_EVENT_PKT:
-			pr_info("Event packet");
-			st_gdata->rx_state = ST_BT_W4_EVENT_HDR;
-			st_gdata->rx_count = HCI_EVENT_HDR_SIZE;
-			type = HCI_EVENT_PKT;
-			protoid = ST_BT;
-			break;
-
-			/* Bluetooth acl packet? */
-		case HCI_ACLDATA_PKT:
-			pr_info("ACL packet");
-			st_gdata->rx_state = ST_BT_W4_ACL_HDR;
-			st_gdata->rx_count = HCI_ACL_HDR_SIZE;
-			type = HCI_ACLDATA_PKT;
-			protoid = ST_BT;
-			break;
-
-			/* Bluetooth sco packet? */
-		case HCI_SCODATA_PKT:
-			pr_info("SCO packet");
-			st_gdata->rx_state = ST_BT_W4_SCO_HDR;
-			st_gdata->rx_count = HCI_SCO_HDR_SIZE;
-			type = HCI_SCODATA_PKT;
-			protoid = ST_BT;
-			break;
-
-			/* Channel 8(FM) packet? */
-		case ST_FM_CH8_PKT:
-			pr_info("FM CH8 packet");
-			type = ST_FM_CH8_PKT;
-			st_gdata->rx_state = ST_FM_W4_EVENT_HDR;
-			st_gdata->rx_count = FM_EVENT_HDR_SIZE;
-			protoid = ST_FM;
-			break;
-
-			/* Channel 9(GPS) packet? */
-		case 0x9:	/*ST_LL_GPS_CH9_PKT */
-			pr_info("GPS CH9 packet");
-			type = 0x9;	/* ST_LL_GPS_CH9_PKT; */
-			protoid = ST_GPS;
-			st_gdata->rx_state = ST_GPS_W4_EVENT_HDR;
-			st_gdata->rx_count = 3;	/* GPS_EVENT_HDR_SIZE -1*/
-			break;
 		case LL_SLEEP_IND:
 		case LL_SLEEP_ACK:
 		case LL_WAKE_UP_IND:
-			pr_info("PM packet");
+			pr_debug("PM packet");
 			/* this takes appropriate action based on
 			 * sleep state received --
 			 */
 			st_ll_sleep_state(st_gdata, *ptr);
+			/* if WAKEUP_IND collides copy from waitq to txq
+			 * and assume chip awake
+			 */
+			spin_unlock_irqrestore(&st_gdata->lock, flags);
+			if (st_ll_getstate(st_gdata) == ST_LL_AWAKE)
+				st_wakeup_ack(st_gdata, LL_WAKE_UP_ACK);
+			spin_lock_irqsave(&st_gdata->lock, flags);
+
 			ptr++;
 			count--;
 			continue;
 		case LL_WAKE_UP_ACK:
-			pr_info("PM packet");
+			pr_debug("PM packet");
+
+			spin_unlock_irqrestore(&st_gdata->lock, flags);
 			/* wake up ack received */
 			st_wakeup_ack(st_gdata, *ptr);
+			spin_lock_irqsave(&st_gdata->lock, flags);
+
 			ptr++;
 			count--;
 			continue;
 			/* Unknow packet? */
 		default:
-			pr_err("Unknown packet type %2.2x", (__u8) *ptr);
-			ptr++;
-			count--;
-			continue;
+			type = *ptr;
+			st_gdata->rx_skb = alloc_skb(
+					st_gdata->list[type]->max_frame_size,
+					GFP_ATOMIC);
+			skb_reserve(st_gdata->rx_skb,
+					st_gdata->list[type]->reserve);
+			/* next 2 required for BT only */
+			st_gdata->rx_skb->cb[0] = type; /*pkt_type*/
+			st_gdata->rx_skb->cb[1] = 0; /*incoming*/
+			st_gdata->rx_chnl = *ptr;
+			st_gdata->rx_state = ST_W4_HEADER;
+			st_gdata->rx_count = st_gdata->list[type]->hdr_len;
+			pr_debug("rx_count %ld\n", st_gdata->rx_count);
 		};
 		ptr++;
 		count--;
-
-		switch (protoid) {
-		case ST_BT:
-			/* Allocate new packet to hold received data */
-			st_gdata->rx_skb =
-			    bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC);
-			if (!st_gdata->rx_skb) {
-				pr_err("Can't allocate mem for new packet");
-				st_gdata->rx_state = ST_W4_PACKET_TYPE;
-				st_gdata->rx_count = 0;
-				return;
-			}
-			bt_cb(st_gdata->rx_skb)->pkt_type = type;
-			break;
-		case ST_FM:	/* for FM */
-			st_gdata->rx_skb =
-			    alloc_skb(FM_MAX_FRAME_SIZE, GFP_ATOMIC);
-			if (!st_gdata->rx_skb) {
-				pr_err("Can't allocate mem for new packet");
-				st_gdata->rx_state = ST_W4_PACKET_TYPE;
-				st_gdata->rx_count = 0;
-				return;
-			}
-			/* place holder 0x08 */
-			skb_reserve(st_gdata->rx_skb, 1);
-			st_gdata->rx_skb->cb[0] = ST_FM_CH8_PKT;
-			break;
-		case ST_GPS:
-			/* for GPS */
-			st_gdata->rx_skb =
-			    alloc_skb(100 /*GPS_MAX_FRAME_SIZE */ , GFP_ATOMIC);
-			if (!st_gdata->rx_skb) {
-				pr_err("Can't allocate mem for new packet");
-				st_gdata->rx_state = ST_W4_PACKET_TYPE;
-				st_gdata->rx_count = 0;
-				return;
-			}
-			/* place holder 0x09 */
-			skb_reserve(st_gdata->rx_skb, 1);
-			st_gdata->rx_skb->cb[0] = 0x09;	/*ST_GPS_CH9_PKT; */
-			break;
-		case ST_MAX:
-			break;
-		}
 	}
+	spin_unlock_irqrestore(&st_gdata->lock, flags);
 	pr_debug("done %s", __func__);
 	return;
 }
@@ -466,7 +393,7 @@ void st_int_enqueue(struct st_data_s *st_gdata, struct sk_buff *skb)
 
 	switch (st_ll_getstate(st_gdata)) {
 	case ST_LL_AWAKE:
-		pr_info("ST LL is AWAKE, sending normally");
+		pr_debug("ST LL is AWAKE, sending normally");
 		skb_queue_tail(&st_gdata->txq, skb);
 		break;
 	case ST_LL_ASLEEP_TO_AWAKE:
@@ -506,7 +433,7 @@ void st_tx_wakeup(struct st_data_s *st_data)
 	pr_debug("%s", __func__);
 	/* check for sending & set flag sending here */
 	if (test_and_set_bit(ST_TX_SENDING, &st_data->tx_state)) {
-		pr_info("ST already sending");
+		pr_debug("ST already sending");
 		/* keep sending */
 		set_bit(ST_TX_WAKEUP, &st_data->tx_state);
 		return;
@@ -548,9 +475,9 @@ void kim_st_list_protocols(struct st_data_s *st_gdata, void *buf)
 {
 	seq_printf(buf, "[%d]\nBT=%c\nFM=%c\nGPS=%c\n",
 			st_gdata->protos_registered,
-			st_gdata->list[ST_BT] != NULL ? 'R' : 'U',
-			st_gdata->list[ST_FM] != NULL ? 'R' : 'U',
-			st_gdata->list[ST_GPS] != NULL ? 'R' : 'U');
+			st_gdata->list[0x04] != NULL ? 'R' : 'U',
+			st_gdata->list[0x08] != NULL ? 'R' : 'U',
+			st_gdata->list[0x09] != NULL ? 'R' : 'U');
 }
 
 /********************************************************************/
@@ -565,20 +492,20 @@ long st_register(struct st_proto_s *new_proto)
 	unsigned long flags = 0;
 
 	st_kim_ref(&st_gdata, 0);
-	pr_info("%s(%d) ", __func__, new_proto->type);
+	pr_info("%s(%d) ", __func__, new_proto->chnl_id);
 	if (st_gdata == NULL || new_proto == NULL || new_proto->recv == NULL
 	    || new_proto->reg_complete_cb == NULL) {
 		pr_err("gdata/new_proto/recv or reg_complete_cb not ready");
-		return -1;
+		return -EINVAL;
 	}
 
-	if (new_proto->type < ST_BT || new_proto->type >= ST_MAX) {
-		pr_err("protocol %d not supported", new_proto->type);
+	if (new_proto->chnl_id >= ST_MAX_CHANNELS) {
+		pr_err("chnl_id %d not supported", new_proto->chnl_id);
 		return -EPROTONOSUPPORT;
 	}
 
-	if (st_gdata->list[new_proto->type] != NULL) {
-		pr_err("protocol %d already registered", new_proto->type);
+	if (st_gdata->list[new_proto->chnl_id] != NULL) {
+		pr_err("chnl_id %d already registered", new_proto->chnl_id);
 		return -EALREADY;
 	}
 
@@ -586,11 +513,10 @@ long st_register(struct st_proto_s *new_proto)
 	spin_lock_irqsave(&st_gdata->lock, flags);
 
 	if (test_bit(ST_REG_IN_PROGRESS, &st_gdata->st_state)) {
-		pr_info(" ST_REG_IN_PROGRESS:%d ", new_proto->type);
+		pr_info(" ST_REG_IN_PROGRESS:%d ", new_proto->chnl_id);
 		/* fw download in progress */
-		st_kim_chip_toggle(new_proto->type, KIM_GPIO_ACTIVE);
 
-		st_gdata->list[new_proto->type] = new_proto;
+		add_channel_to_table(st_gdata, new_proto);
 		st_gdata->protos_registered++;
 		new_proto->write = st_write;
 
@@ -598,7 +524,7 @@ long st_register(struct st_proto_s *new_proto)
 		spin_unlock_irqrestore(&st_gdata->lock, flags);
 		return -EINPROGRESS;
 	} else if (st_gdata->protos_registered == ST_EMPTY) {
-		pr_info(" protocol list empty :%d ", new_proto->type);
+		pr_info(" chnl_id list empty :%d ", new_proto->chnl_id);
 		set_bit(ST_REG_IN_PROGRESS, &st_gdata->st_state);
 		st_recv = st_kim_recv;
 
@@ -616,16 +542,11 @@ long st_register(struct st_proto_s *new_proto)
 			if ((st_gdata->protos_registered != ST_EMPTY) &&
 			    (test_bit(ST_REG_PENDING, &st_gdata->st_state))) {
 				pr_err(" KIM failure complete callback ");
-				st_reg_complete(st_gdata, -1);
+				st_reg_complete(st_gdata, err);
 			}
-
-			return -1;
+			return -EINVAL;
 		}
 
-		/* the protocol might require other gpios to be toggled
-		 */
-		st_kim_chip_toggle(new_proto->type, KIM_GPIO_ACTIVE);
-
 		clear_bit(ST_REG_IN_PROGRESS, &st_gdata->st_state);
 		st_recv = st_int_recv;
 
@@ -642,14 +563,14 @@ long st_register(struct st_proto_s *new_proto)
 		/* check for already registered once more,
 		 * since the above check is old
 		 */
-		if (st_gdata->list[new_proto->type] != NULL) {
+		if (st_gdata->list[new_proto->chnl_id] != NULL) {
 			pr_err(" proto %d already registered ",
-				   new_proto->type);
+				   new_proto->chnl_id);
 			return -EALREADY;
 		}
 
 		spin_lock_irqsave(&st_gdata->lock, flags);
-		st_gdata->list[new_proto->type] = new_proto;
+		add_channel_to_table(st_gdata, new_proto);
 		st_gdata->protos_registered++;
 		new_proto->write = st_write;
 		spin_unlock_irqrestore(&st_gdata->lock, flags);
@@ -657,22 +578,7 @@ long st_register(struct st_proto_s *new_proto)
 	}
 	/* if fw is already downloaded & new stack registers protocol */
 	else {
-		switch (new_proto->type) {
-		case ST_BT:
-			/* do nothing */
-			break;
-		case ST_FM:
-		case ST_GPS:
-			st_kim_chip_toggle(new_proto->type, KIM_GPIO_ACTIVE);
-			break;
-		case ST_MAX:
-		default:
-			pr_err("%d protocol not supported",
-				   new_proto->type);
-			spin_unlock_irqrestore(&st_gdata->lock, flags);
-			return -EPROTONOSUPPORT;
-		}
-		st_gdata->list[new_proto->type] = new_proto;
+		add_channel_to_table(st_gdata, new_proto);
 		st_gdata->protos_registered++;
 		new_proto->write = st_write;
 
@@ -680,48 +586,42 @@ long st_register(struct st_proto_s *new_proto)
 		spin_unlock_irqrestore(&st_gdata->lock, flags);
 		return err;
 	}
-	pr_debug("done %s(%d) ", __func__, new_proto->type);
+	pr_debug("done %s(%d) ", __func__, new_proto->chnl_id);
 }
 EXPORT_SYMBOL_GPL(st_register);
 
 /* to unregister a protocol -
  * to be called from protocol stack driver
  */
-long st_unregister(enum proto_type type)
+long st_unregister(struct st_proto_s *proto)
 {
 	long err = 0;
 	unsigned long flags = 0;
 	struct st_data_s	*st_gdata;
 
-	pr_debug("%s: %d ", __func__, type);
+	pr_debug("%s: %d ", __func__, proto->chnl_id);
 
 	st_kim_ref(&st_gdata, 0);
-	if (type < ST_BT || type >= ST_MAX) {
-		pr_err(" protocol %d not supported", type);
+	if (proto->chnl_id >= ST_MAX_CHANNELS) {
+		pr_err(" chnl_id %d not supported", proto->chnl_id);
 		return -EPROTONOSUPPORT;
 	}
 
 	spin_lock_irqsave(&st_gdata->lock, flags);
 
-	if (st_gdata->list[type] == NULL) {
-		pr_err(" protocol %d not registered", type);
+	if (st_gdata->list[proto->chnl_id] == NULL) {
+		pr_err(" chnl_id %d not registered", proto->chnl_id);
 		spin_unlock_irqrestore(&st_gdata->lock, flags);
 		return -EPROTONOSUPPORT;
 	}
 
 	st_gdata->protos_registered--;
-	st_gdata->list[type] = NULL;
-
-	/* kim ignores BT in the below function
-	 * and handles the rest, BT is toggled
-	 * only in kim_start and kim_stop
-	 */
-	st_kim_chip_toggle(type, KIM_GPIO_INACTIVE);
+	remove_channel_from_table(st_gdata, proto);
 	spin_unlock_irqrestore(&st_gdata->lock, flags);
 
 	if ((st_gdata->protos_registered == ST_EMPTY) &&
 	    (!test_bit(ST_REG_PENDING, &st_gdata->st_state))) {
-		pr_info(" all protocols unregistered ");
+		pr_info(" all chnl_ids unregistered ");
 
 		/* stop traffic on tty */
 		if (st_gdata->tty) {
@@ -729,7 +629,7 @@ long st_unregister(enum proto_type type)
 			stop_tty(st_gdata->tty);
 		}
 
-		/* all protocols now unregistered */
+		/* all chnl_ids now unregistered */
 		st_kim_stop(st_gdata->kim_data);
 		/* disable ST LL */
 		st_ll_disable(st_gdata);
@@ -744,37 +644,15 @@ long st_unregister(enum proto_type type)
 long st_write(struct sk_buff *skb)
 {
 	struct st_data_s *st_gdata;
-#ifdef DEBUG
-	enum proto_type protoid = ST_MAX;
-#endif
 	long len;
 
 	st_kim_ref(&st_gdata, 0);
 	if (unlikely(skb == NULL || st_gdata == NULL
 		|| st_gdata->tty == NULL)) {
 		pr_err("data/tty unavailable to perform write");
-		return -1;
+		return -EINVAL;
 	}
-#ifdef DEBUG			/* open-up skb to read the 1st byte */
-	switch (skb->data[0]) {
-	case HCI_COMMAND_PKT:
-	case HCI_ACLDATA_PKT:
-	case HCI_SCODATA_PKT:
-		protoid = ST_BT;
-		break;
-	case ST_FM_CH8_PKT:
-		protoid = ST_FM;
-		break;
-	case 0x09:
-		protoid = ST_GPS;
-		break;
-	}
-	if (unlikely(st_gdata->list[protoid] == NULL)) {
-		pr_err(" protocol %d not registered, and writing? ",
-			   protoid);
-		return -1;
-	}
-#endif
+
 	pr_debug("%d to be written", skb->len);
 	len = skb->len;
 
@@ -824,7 +702,7 @@ static int st_tty_open(struct tty_struct *tty)
 
 static void st_tty_close(struct tty_struct *tty)
 {
-	unsigned char i = ST_MAX;
+	unsigned char i = ST_MAX_CHANNELS;
 	unsigned long flags = 0;
 	struct	st_data_s *st_gdata = tty->disc_data;
 
@@ -835,7 +713,7 @@ static void st_tty_close(struct tty_struct *tty)
 	 * un-installed for some reason - what should be done ?
 	 */
 	spin_lock_irqsave(&st_gdata->lock, flags);
-	for (i = ST_BT; i < ST_MAX; i++) {
+	for (i = ST_BT; i < ST_MAX_CHANNELS; i++) {
 		if (st_gdata->list[i] != NULL)
 			pr_err("%d not un-registered", i);
 		st_gdata->list[i] = NULL;
@@ -869,7 +747,6 @@ static void st_tty_close(struct tty_struct *tty)
 static void st_tty_receive(struct tty_struct *tty, const unsigned char *data,
 			   char *tty_flags, int count)
 {
-
 #ifdef VERBOSE
 	print_hex_dump(KERN_DEBUG, ">in>", DUMP_PREFIX_NONE,
 		16, 1, data, count, 0);
@@ -960,7 +837,7 @@ int st_core_init(struct st_data_s **core_data)
 		err = tty_unregister_ldisc(N_TI_WL);
 		if (err)
 			pr_err("unable to un-register ldisc");
-		return -1;
+		return err;
 	}
 	*core_data = st_gdata;
 	return 0;
diff --git a/drivers/misc/ti-st/st_kim.c b/drivers/misc/ti-st/st_kim.c
index 73b6c8b0e869..9ee4c788aa69 100644
--- a/drivers/misc/ti-st/st_kim.c
+++ b/drivers/misc/ti-st/st_kim.c
@@ -30,50 +30,12 @@
 #include <linux/debugfs.h>
 #include <linux/seq_file.h>
 #include <linux/sched.h>
-#include <linux/rfkill.h>
-
-/* understand BT events for fw response */
-#include <net/bluetooth/bluetooth.h>
-#include <net/bluetooth/hci_core.h>
-#include <net/bluetooth/hci.h>
+#include <linux/tty.h>
 
+#include <linux/skbuff.h>
 #include <linux/ti_wilink_st.h>
 
 
-static int kim_probe(struct platform_device *pdev);
-static int kim_remove(struct platform_device *pdev);
-
-/* KIM platform device driver structure */
-static struct platform_driver kim_platform_driver = {
-	.probe = kim_probe,
-	.remove = kim_remove,
-	/* TODO: ST driver power management during suspend/resume ?
-	 */
-#if 0
-	.suspend = kim_suspend,
-	.resume = kim_resume,
-#endif
-	.driver = {
-		   .name = "kim",
-		   .owner = THIS_MODULE,
-		   },
-};
-
-static int kim_toggle_radio(void*, bool);
-static const struct rfkill_ops kim_rfkill_ops = {
-	.set_block = kim_toggle_radio,
-};
-
-/* strings to be used for rfkill entries and by
- * ST Core to be used for sysfs debug entry
- */
-#define PROTO_ENTRY(type, name)	name
-const unsigned char *protocol_names[] = {
-	PROTO_ENTRY(ST_BT, "Bluetooth"),
-	PROTO_ENTRY(ST_FM, "FM"),
-	PROTO_ENTRY(ST_GPS, "GPS"),
-};
-
 #define MAX_ST_DEVICES	3	/* Imagine 1 on each UART for now */
 static struct platform_device *st_kim_devices[MAX_ST_DEVICES];
 
@@ -134,7 +96,7 @@ static inline int kim_check_data_len(struct kim_data_s *kim_gdata, int len)
 		/* Packet header has non-zero payload length and
 		 * we have enough space in created skb. Lets read
 		 * payload data */
-		kim_gdata->rx_state = ST_BT_W4_DATA;
+		kim_gdata->rx_state = ST_W4_DATA;
 		kim_gdata->rx_count = len;
 		return len;
 	}
@@ -158,8 +120,8 @@ void kim_int_recv(struct kim_data_s *kim_gdata,
 	const unsigned char *data, long count)
 {
 	const unsigned char *ptr;
-	struct hci_event_hdr *eh;
 	int len = 0, type = 0;
+	unsigned char *plen;
 
 	pr_debug("%s", __func__);
 	/* Decode received bytes here */
@@ -183,29 +145,27 @@ void kim_int_recv(struct kim_data_s *kim_gdata,
 			/* Check ST RX state machine , where are we? */
 			switch (kim_gdata->rx_state) {
 				/* Waiting for complete packet ? */
-			case ST_BT_W4_DATA:
+			case ST_W4_DATA:
 				pr_debug("Complete pkt received");
 				validate_firmware_response(kim_gdata);
 				kim_gdata->rx_state = ST_W4_PACKET_TYPE;
 				kim_gdata->rx_skb = NULL;
 				continue;
 				/* Waiting for Bluetooth event header ? */
-			case ST_BT_W4_EVENT_HDR:
-				eh = (struct hci_event_hdr *)kim_gdata->
-				    rx_skb->data;
-				pr_debug("Event header: evt 0x%2.2x"
-					   "plen %d", eh->evt, eh->plen);
-				kim_check_data_len(kim_gdata, eh->plen);
+			case ST_W4_HEADER:
+				plen =
+				(unsigned char *)&kim_gdata->rx_skb->data[1];
+				pr_debug("event hdr: plen 0x%02x\n", *plen);
+				kim_check_data_len(kim_gdata, *plen);
 				continue;
 			}	/* end of switch */
 		}		/* end of if rx_state */
 		switch (*ptr) {
 			/* Bluetooth event packet? */
-		case HCI_EVENT_PKT:
-			pr_info("Event packet");
-			kim_gdata->rx_state = ST_BT_W4_EVENT_HDR;
-			kim_gdata->rx_count = HCI_EVENT_HDR_SIZE;
-			type = HCI_EVENT_PKT;
+		case 0x04:
+			kim_gdata->rx_state = ST_W4_HEADER;
+			kim_gdata->rx_count = 2;
+			type = *ptr;
 			break;
 		default:
 			pr_info("unknown packet");
@@ -216,16 +176,18 @@ void kim_int_recv(struct kim_data_s *kim_gdata,
 		ptr++;
 		count--;
 		kim_gdata->rx_skb =
-		    bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC);
+			alloc_skb(1024+8, GFP_ATOMIC);
 		if (!kim_gdata->rx_skb) {
 			pr_err("can't allocate mem for new packet");
 			kim_gdata->rx_state = ST_W4_PACKET_TYPE;
 			kim_gdata->rx_count = 0;
 			return;
 		}
-		bt_cb(kim_gdata->rx_skb)->pkt_type = type;
+		skb_reserve(kim_gdata->rx_skb, 8);
+		kim_gdata->rx_skb->cb[0] = 4;
+		kim_gdata->rx_skb->cb[1] = 0;
+
 	}
-	pr_info("done %s", __func__);
 	return;
 }
 
@@ -239,13 +201,13 @@ static long read_local_version(struct kim_data_s *kim_gdata, char *bts_scr_name)
 	INIT_COMPLETION(kim_gdata->kim_rcvd);
 	if (4 != st_int_write(kim_gdata->core_data, read_ver_cmd, 4)) {
 		pr_err("kim: couldn't write 4 bytes");
-		return -1;
+		return -EIO;
 	}
 
 	if (!wait_for_completion_timeout
 	    (&kim_gdata->kim_rcvd, msecs_to_jiffies(CMD_RESP_TIME))) {
 		pr_err(" waiting for ver info- timed out ");
-		return -1;
+		return -ETIMEDOUT;
 	}
 
 	version =
@@ -270,6 +232,26 @@ static long read_local_version(struct kim_data_s *kim_gdata, char *bts_scr_name)
 	return 0;
 }
 
+void skip_change_remote_baud(unsigned char **ptr, long *len)
+{
+	unsigned char *nxt_action, *cur_action;
+	cur_action = *ptr;
+
+	nxt_action = cur_action + sizeof(struct bts_action) +
+		((struct bts_action *) cur_action)->size;
+
+	if (((struct bts_action *) nxt_action)->type != ACTION_WAIT_EVENT) {
+		pr_err("invalid action after change remote baud command");
+	} else {
+		*ptr = *ptr + sizeof(struct bts_action) +
+			((struct bts_action *)nxt_action)->size;
+		*len = *len - (sizeof(struct bts_action) +
+				((struct bts_action *)nxt_action)->size);
+		/* warn user on not commenting these in firmware */
+		pr_warn("skipping the wait event of change remote baud");
+	}
+}
+
 /**
  * download_firmware -
  *	internal function which parses through the .bts firmware
@@ -282,6 +264,9 @@ static long download_firmware(struct kim_data_s *kim_gdata)
 	unsigned char *ptr = NULL;
 	unsigned char *action_ptr = NULL;
 	unsigned char bts_scr_name[30] = { 0 };	/* 30 char long bts scr name? */
+	int wr_room_space;
+	int cmd_size;
+	unsigned long timeout;
 
 	err = read_local_version(kim_gdata, bts_scr_name);
 	if (err != 0) {
@@ -295,7 +280,7 @@ static long download_firmware(struct kim_data_s *kim_gdata)
 		     (kim_gdata->fw_entry->size == 0))) {
 		pr_err(" request_firmware failed(errno %ld) for %s", err,
 			   bts_scr_name);
-		return -1;
+		return -EINVAL;
 	}
 	ptr = (void *)kim_gdata->fw_entry->data;
 	len = kim_gdata->fw_entry->size;
@@ -318,29 +303,72 @@ static long download_firmware(struct kim_data_s *kim_gdata)
 			     0xFF36)) {
 				/* ignore remote change
 				 * baud rate HCI VS command */
-				pr_err
-				    (" change remote baud"
+				pr_warn("change remote baud"
 				    " rate command in firmware");
+				skip_change_remote_baud(&ptr, &len);
 				break;
 			}
+			/*
+			 * Make sure we have enough free space in uart
+			 * tx buffer to write current firmware command
+			 */
+			cmd_size = ((struct bts_action *)ptr)->size;
+			timeout = jiffies + msecs_to_jiffies(CMD_WR_TIME);
+			do {
+				wr_room_space =
+					st_get_uart_wr_room(kim_gdata->core_data);
+				if (wr_room_space < 0) {
+					pr_err("Unable to get free "
+							"space info from uart tx buffer");
+					release_firmware(kim_gdata->fw_entry);
+					return wr_room_space;
+				}
+				mdelay(1); /* wait 1ms before checking room */
+			} while ((wr_room_space < cmd_size) &&
+					time_before(jiffies, timeout));
+
+			/* Timeout happened ? */
+			if (time_after_eq(jiffies, timeout)) {
+				pr_err("Timeout while waiting for free "
+						"free space in uart tx buffer");
+				release_firmware(kim_gdata->fw_entry);
+				return -ETIMEDOUT;
+			}
 
-			INIT_COMPLETION(kim_gdata->kim_rcvd);
+			/*
+			 * Free space found in uart buffer, call st_int_write
+			 * to send current firmware command to the uart tx
+			 * buffer.
+			 */
 			err = st_int_write(kim_gdata->core_data,
 			((struct bts_action_send *)action_ptr)->data,
 					   ((struct bts_action *)ptr)->size);
 			if (unlikely(err < 0)) {
 				release_firmware(kim_gdata->fw_entry);
-				return -1;
+				return err;
 			}
+			/*
+			 * Check number of bytes written to the uart tx buffer
+			 * and requested command write size
+			 */
+			if (err != cmd_size) {
+				pr_err("Number of bytes written to uart "
+						"tx buffer are not matching with "
+						"requested cmd write size");
+				release_firmware(kim_gdata->fw_entry);
+				return -EIO;
+			}
+			break;
+		case ACTION_WAIT_EVENT:  /* wait */
 			if (!wait_for_completion_timeout
-			    (&kim_gdata->kim_rcvd,
-			     msecs_to_jiffies(CMD_RESP_TIME))) {
-				pr_err
-				    (" response timeout during fw download ");
+					(&kim_gdata->kim_rcvd,
+					 msecs_to_jiffies(CMD_RESP_TIME))) {
+				pr_err("response timeout during fw download ");
 				/* timed out */
 				release_firmware(kim_gdata->fw_entry);
-				return -1;
+				return -ETIMEDOUT;
 			}
+			INIT_COMPLETION(kim_gdata->kim_rcvd);
 			break;
 		case ACTION_DELAY:	/* sleep */
 			pr_info("sleep command in scr");
@@ -362,50 +390,6 @@ static long download_firmware(struct kim_data_s *kim_gdata)
 
 /**********************************************************************/
 /* functions called from ST core */
-/* function to toggle the GPIO
- * needs to know whether the GPIO is active high or active low
- */
-void st_kim_chip_toggle(enum proto_type type, enum kim_gpio_state state)
-{
-	struct platform_device	*kim_pdev;
-	struct kim_data_s	*kim_gdata;
-	pr_info(" %s ", __func__);
-
-	kim_pdev = st_get_plat_device(0);
-	kim_gdata = dev_get_drvdata(&kim_pdev->dev);
-
-	if (kim_gdata->gpios[type] == -1) {
-		pr_info(" gpio not requested for protocol %s",
-			   protocol_names[type]);
-		return;
-	}
-	switch (type) {
-	case ST_BT:
-		/*Do Nothing */
-		break;
-
-	case ST_FM:
-		if (state == KIM_GPIO_ACTIVE)
-			gpio_set_value(kim_gdata->gpios[ST_FM], GPIO_LOW);
-		else
-			gpio_set_value(kim_gdata->gpios[ST_FM], GPIO_HIGH);
-		break;
-
-	case ST_GPS:
-		if (state == KIM_GPIO_ACTIVE)
-			gpio_set_value(kim_gdata->gpios[ST_GPS], GPIO_HIGH);
-		else
-			gpio_set_value(kim_gdata->gpios[ST_GPS], GPIO_LOW);
-		break;
-
-	case ST_MAX:
-	default:
-		break;
-	}
-
-	return;
-}
-
 /* called from ST Core, when REG_IN_PROGRESS (registration in progress)
  * can be because of
  * 1. response to read local version
@@ -416,7 +400,6 @@ void st_kim_recv(void *disc_data, const unsigned char *data, long count)
 	struct st_data_s	*st_gdata = (struct st_data_s *)disc_data;
 	struct kim_data_s	*kim_gdata = st_gdata->kim_data;
 
-	pr_info(" %s ", __func__);
 	/* copy to local buffer */
 	if (unlikely(data[4] == 0x01 && data[5] == 0x10 && data[0] == 0x04)) {
 		/* must be the read_ver_cmd */
@@ -455,35 +438,28 @@ long st_kim_start(void *kim_data)
 	pr_info(" %s", __func__);
 
 	do {
-		/* TODO: this is only because rfkill sub-system
-		 * doesn't send events to user-space if the state
-		 * isn't changed
-		 */
-		rfkill_set_hw_state(kim_gdata->rfkill[ST_BT], 1);
 		/* Configure BT nShutdown to HIGH state */
-		gpio_set_value(kim_gdata->gpios[ST_BT], GPIO_LOW);
+		gpio_set_value(kim_gdata->nshutdown, GPIO_LOW);
 		mdelay(5);	/* FIXME: a proper toggle */
-		gpio_set_value(kim_gdata->gpios[ST_BT], GPIO_HIGH);
+		gpio_set_value(kim_gdata->nshutdown, GPIO_HIGH);
 		mdelay(100);
 		/* re-initialize the completion */
 		INIT_COMPLETION(kim_gdata->ldisc_installed);
-#if 0 /* older way of signalling user-space UIM */
-		/* send signal to UIM */
-		err = kill_pid(find_get_pid(kim_gdata->uim_pid), SIGUSR2, 0);
-		if (err != 0) {
-			pr_info(" sending SIGUSR2 to uim failed %ld", err);
-			err = -1;
-			continue;
-		}
-#endif
-		/* unblock and send event to UIM via /dev/rfkill */
-		rfkill_set_hw_state(kim_gdata->rfkill[ST_BT], 0);
+		/* send notification to UIM */
+		kim_gdata->ldisc_install = 1;
+		pr_info("ldisc_install = 1");
+		sysfs_notify(&kim_gdata->kim_pdev->dev.kobj,
+				NULL, "install");
 		/* wait for ldisc to be installed */
 		err = wait_for_completion_timeout(&kim_gdata->ldisc_installed,
 				msecs_to_jiffies(LDISC_TIME));
 		if (!err) {	/* timeout */
 			pr_err("line disc installation timed out ");
-			err = -1;
+			kim_gdata->ldisc_install = 0;
+			pr_info("ldisc_install = 0");
+			sysfs_notify(&kim_gdata->kim_pdev->dev.kobj,
+					NULL, "install");
+			err = -ETIMEDOUT;
 			continue;
 		} else {
 			/* ldisc installed now */
@@ -491,6 +467,10 @@ long st_kim_start(void *kim_data)
 			err = download_firmware(kim_gdata);
 			if (err != 0) {
 				pr_err("download firmware failed");
+				kim_gdata->ldisc_install = 0;
+				pr_info("ldisc_install = 0");
+				sysfs_notify(&kim_gdata->kim_pdev->dev.kobj,
+						NULL, "install");
 				continue;
 			} else {	/* on success don't retry */
 				break;
@@ -510,31 +490,30 @@ long st_kim_stop(void *kim_data)
 	struct kim_data_s	*kim_gdata = (struct kim_data_s *)kim_data;
 
 	INIT_COMPLETION(kim_gdata->ldisc_installed);
-#if 0 /* older way of signalling user-space UIM */
-	/* send signal to UIM */
-	err = kill_pid(find_get_pid(kim_gdata->uim_pid), SIGUSR2, 1);
-	if (err != 0) {
-		pr_err("sending SIGUSR2 to uim failed %ld", err);
-		return -1;
-	}
-#endif
-	/* set BT rfkill to be blocked */
-	err = rfkill_set_hw_state(kim_gdata->rfkill[ST_BT], 1);
+
+	/* Flush any pending characters in the driver and discipline. */
+	tty_ldisc_flush(kim_gdata->core_data->tty);
+	tty_driver_flush_buffer(kim_gdata->core_data->tty);
+
+	/* send uninstall notification to UIM */
+	pr_info("ldisc_install = 0");
+	kim_gdata->ldisc_install = 0;
+	sysfs_notify(&kim_gdata->kim_pdev->dev.kobj, NULL, "install");
 
 	/* wait for ldisc to be un-installed */
 	err = wait_for_completion_timeout(&kim_gdata->ldisc_installed,
 			msecs_to_jiffies(LDISC_TIME));
 	if (!err) {		/* timeout */
 		pr_err(" timed out waiting for ldisc to be un-installed");
-		return -1;
+		return -ETIMEDOUT;
 	}
 
 	/* By default configure BT nShutdown to LOW state */
-	gpio_set_value(kim_gdata->gpios[ST_BT], GPIO_LOW);
+	gpio_set_value(kim_gdata->nshutdown, GPIO_LOW);
 	mdelay(1);
-	gpio_set_value(kim_gdata->gpios[ST_BT], GPIO_HIGH);
+	gpio_set_value(kim_gdata->nshutdown, GPIO_HIGH);
 	mdelay(1);
-	gpio_set_value(kim_gdata->gpios[ST_BT], GPIO_LOW);
+	gpio_set_value(kim_gdata->nshutdown, GPIO_LOW);
 	return err;
 }
 
@@ -558,33 +537,59 @@ static int show_list(struct seq_file *s, void *unused)
 	return 0;
 }
 
-/* function called from rfkill subsystem, when someone from
- * user space would write 0/1 on the sysfs entry
- * /sys/class/rfkill/rfkill0,1,3/state
- */
-static int kim_toggle_radio(void *data, bool blocked)
+static ssize_t show_install(struct device *dev,
+		struct device_attribute *attr, char *buf)
 {
-	enum proto_type type = *((enum proto_type *)data);
-	pr_debug(" %s: %d ", __func__, type);
-
-	switch (type) {
-	case ST_BT:
-		/* do nothing */
-	break;
-	case ST_FM:
-	case ST_GPS:
-		if (blocked)
-			st_kim_chip_toggle(type, KIM_GPIO_INACTIVE);
-		else
-			st_kim_chip_toggle(type, KIM_GPIO_ACTIVE);
-	break;
-	case ST_MAX:
-		pr_err(" wrong proto type ");
-	break;
-	}
-	return 0;
+	struct kim_data_s *kim_data = dev_get_drvdata(dev);
+	return sprintf(buf, "%d\n", kim_data->ldisc_install);
 }
 
+static ssize_t show_dev_name(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct kim_data_s *kim_data = dev_get_drvdata(dev);
+	return sprintf(buf, "%s\n", kim_data->dev_name);
+}
+
+static ssize_t show_baud_rate(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct kim_data_s *kim_data = dev_get_drvdata(dev);
+	return sprintf(buf, "%ld\n", kim_data->baud_rate);
+}
+
+static ssize_t show_flow_cntrl(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct kim_data_s *kim_data = dev_get_drvdata(dev);
+	return sprintf(buf, "%d\n", kim_data->flow_cntrl);
+}
+
+/* structures specific for sysfs entries */
+static struct kobj_attribute ldisc_install =
+__ATTR(install, 0444, (void *)show_install, NULL);
+
+static struct kobj_attribute uart_dev_name =
+__ATTR(dev_name, 0444, (void *)show_dev_name, NULL);
+
+static struct kobj_attribute uart_baud_rate =
+__ATTR(baud_rate, 0444, (void *)show_baud_rate, NULL);
+
+static struct kobj_attribute uart_flow_cntrl =
+__ATTR(flow_cntrl, 0444, (void *)show_flow_cntrl, NULL);
+
+static struct attribute *uim_attrs[] = {
+	&ldisc_install.attr,
+	&uart_dev_name.attr,
+	&uart_baud_rate.attr,
+	&uart_flow_cntrl.attr,
+	NULL,
+};
+
+static struct attribute_group uim_attr_grp = {
+	.attrs = uim_attrs,
+};
+
 /**
  * st_kim_ref - reference the core's data
  *	This references the per-ST platform device in the arch/xx/
@@ -637,9 +642,8 @@ struct dentry *kim_debugfs_dir;
 static int kim_probe(struct platform_device *pdev)
 {
 	long status;
-	long proto;
-	long *gpios = pdev->dev.platform_data;
 	struct kim_data_s	*kim_gdata;
+	struct ti_st_plat_data	*pdata = pdev->dev.platform_data;
 
 	if ((pdev->id != -1) && (pdev->id < MAX_ST_DEVICES)) {
 		/* multiple devices could exist */
@@ -659,44 +663,24 @@ static int kim_probe(struct platform_device *pdev)
 	status = st_core_init(&kim_gdata->core_data);
 	if (status != 0) {
 		pr_err(" ST core init failed");
-		return -1;
+		return -EIO;
 	}
 	/* refer to itself */
 	kim_gdata->core_data->kim_data = kim_gdata;
 
-	for (proto = 0; proto < ST_MAX; proto++) {
-		kim_gdata->gpios[proto] = gpios[proto];
-		pr_info(" %ld gpio to be requested", gpios[proto]);
+	/* Claim the chip enable nShutdown gpio from the system */
+	kim_gdata->nshutdown = pdata->nshutdown_gpio;
+	status = gpio_request(kim_gdata->nshutdown, "kim");
+	if (unlikely(status)) {
+		pr_err(" gpio %ld request failed ", kim_gdata->nshutdown);
+		return status;
 	}
 
-	for (proto = 0; (proto < ST_MAX) && (gpios[proto] != -1); proto++) {
-		/* Claim the Bluetooth/FM/GPIO
-		 * nShutdown gpio from the system
-		 */
-		status = gpio_request(gpios[proto], "kim");
-		if (unlikely(status)) {
-			pr_err(" gpio %ld request failed ", gpios[proto]);
-			proto -= 1;
-			while (proto >= 0) {
-				if (gpios[proto] != -1)
-					gpio_free(gpios[proto]);
-			}
-			return status;
-		}
-
-		/* Configure nShutdown GPIO as output=0 */
-		status =
-		    gpio_direction_output(gpios[proto], 0);
-		if (unlikely(status)) {
-			pr_err(" unable to configure gpio %ld",
-				   gpios[proto]);
-			proto -= 1;
-			while (proto >= 0) {
-				if (gpios[proto] != -1)
-					gpio_free(gpios[proto]);
-			}
-			return status;
-		}
+	/* Configure nShutdown GPIO as output=0 */
+	status = gpio_direction_output(kim_gdata->nshutdown, 0);
+	if (unlikely(status)) {
+		pr_err(" unable to configure gpio %ld", kim_gdata->nshutdown);
+		return status;
 	}
 	/* get reference of pdev for request_firmware
 	 */
@@ -704,34 +688,23 @@ static int kim_probe(struct platform_device *pdev)
 	init_completion(&kim_gdata->kim_rcvd);
 	init_completion(&kim_gdata->ldisc_installed);
 
-	for (proto = 0; (proto < ST_MAX) && (gpios[proto] != -1); proto++) {
-		/* TODO: should all types be rfkill_type_bt ? */
-		kim_gdata->rf_protos[proto] = proto;
-		kim_gdata->rfkill[proto] = rfkill_alloc(protocol_names[proto],
-			&pdev->dev, RFKILL_TYPE_BLUETOOTH,
-			&kim_rfkill_ops, &kim_gdata->rf_protos[proto]);
-		if (kim_gdata->rfkill[proto] == NULL) {
-			pr_err("cannot create rfkill entry for gpio %ld",
-				   gpios[proto]);
-			continue;
-		}
-		/* block upon creation */
-		rfkill_init_sw_state(kim_gdata->rfkill[proto], 1);
-		status = rfkill_register(kim_gdata->rfkill[proto]);
-		if (unlikely(status)) {
-			pr_err("rfkill registration failed for gpio %ld",
-				   gpios[proto]);
-			rfkill_unregister(kim_gdata->rfkill[proto]);
-			continue;
-		}
-		pr_info("rfkill entry created for %ld", gpios[proto]);
+	status = sysfs_create_group(&pdev->dev.kobj, &uim_attr_grp);
+	if (status) {
+		pr_err("failed to create sysfs entries");
+		return status;
 	}
 
+	/* copying platform data */
+	strncpy(kim_gdata->dev_name, pdata->dev_name, UART_DEV_NAME_LEN);
+	kim_gdata->flow_cntrl = pdata->flow_cntrl;
+	kim_gdata->baud_rate = pdata->baud_rate;
+	pr_info("sysfs entries created\n");
+
 	kim_debugfs_dir = debugfs_create_dir("ti-st", NULL);
 	if (IS_ERR(kim_debugfs_dir)) {
 		pr_err(" debugfs entries creation failed ");
 		kim_debugfs_dir = NULL;
-		return -1;
+		return -EIO;
 	}
 
 	debugfs_create_file("version", S_IRUGO, kim_debugfs_dir,
@@ -744,25 +717,22 @@ static int kim_probe(struct platform_device *pdev)
 
 static int kim_remove(struct platform_device *pdev)
 {
-	/* free the GPIOs requested
-	 */
-	long *gpios = pdev->dev.platform_data;
-	long proto;
+	/* free the GPIOs requested */
+	struct ti_st_plat_data	*pdata = pdev->dev.platform_data;
 	struct kim_data_s	*kim_gdata;
 
 	kim_gdata = dev_get_drvdata(&pdev->dev);
 
-	for (proto = 0; (proto < ST_MAX) && (gpios[proto] != -1); proto++) {
-		/* Claim the Bluetooth/FM/GPIO
-		 * nShutdown gpio from the system
-		 */
-		gpio_free(gpios[proto]);
-		rfkill_unregister(kim_gdata->rfkill[proto]);
-		rfkill_destroy(kim_gdata->rfkill[proto]);
-		kim_gdata->rfkill[proto] = NULL;
-	}
-	pr_info("kim: GPIO Freed");
+	/* Free the Bluetooth/FM/GPIO
+	 * nShutdown gpio from the system
+	 */
+	gpio_free(pdata->nshutdown_gpio);
+	pr_info("nshutdown GPIO Freed");
+
 	debugfs_remove_recursive(kim_debugfs_dir);
+	sysfs_remove_group(&pdev->dev.kobj, &uim_attr_grp);
+	pr_info("sysfs entries removed");
+
 	kim_gdata->kim_pdev = NULL;
 	st_core_exit(kim_gdata->core_data);
 
@@ -771,23 +741,46 @@ static int kim_remove(struct platform_device *pdev)
 	return 0;
 }
 
+int kim_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct ti_st_plat_data	*pdata = pdev->dev.platform_data;
+
+	if (pdata->suspend)
+		return pdata->suspend(pdev, state);
+
+	return -EOPNOTSUPP;
+}
+
+int kim_resume(struct platform_device *pdev)
+{
+	struct ti_st_plat_data	*pdata = pdev->dev.platform_data;
+
+	if (pdata->resume)
+		return pdata->resume(pdev);
+
+	return -EOPNOTSUPP;
+}
+
 /**********************************************************************/
 /* entry point for ST KIM module, called in from ST Core */
+static struct platform_driver kim_platform_driver = {
+	.probe = kim_probe,
+	.remove = kim_remove,
+	.suspend = kim_suspend,
+	.resume = kim_resume,
+	.driver = {
+		.name = "kim",
+		.owner = THIS_MODULE,
+	},
+};
 
 static int __init st_kim_init(void)
 {
-	long ret = 0;
-	ret = platform_driver_register(&kim_platform_driver);
-	if (ret != 0) {
-		pr_err("platform drv registration failed");
-		return -1;
-	}
-	return 0;
+	return platform_driver_register(&kim_platform_driver);
 }
 
 static void __exit st_kim_deinit(void)
 {
-	/* the following returns void */
 	platform_driver_unregister(&kim_platform_driver);
 }
 
diff --git a/drivers/misc/ti-st/st_ll.c b/drivers/misc/ti-st/st_ll.c
index 2bda8dea15b0..3f2495138855 100644
--- a/drivers/misc/ti-st/st_ll.c
+++ b/drivers/misc/ti-st/st_ll.c
@@ -30,7 +30,7 @@ static void send_ll_cmd(struct st_data_s *st_data,
 	unsigned char cmd)
 {
 
-	pr_info("%s: writing %x", __func__, cmd);
+	pr_debug("%s: writing %x", __func__, cmd);
 	st_int_write(st_data, &cmd, 1);
 	return;
 }
@@ -114,23 +114,23 @@ unsigned long st_ll_sleep_state(struct st_data_s *st_data,
 {
 	switch (cmd) {
 	case LL_SLEEP_IND:	/* sleep ind */
-		pr_info("sleep indication recvd");
+		pr_debug("sleep indication recvd");
 		ll_device_want_to_sleep(st_data);
 		break;
 	case LL_SLEEP_ACK:	/* sleep ack */
 		pr_err("sleep ack rcvd: host shouldn't");
 		break;
 	case LL_WAKE_UP_IND:	/* wake ind */
-		pr_info("wake indication recvd");
+		pr_debug("wake indication recvd");
 		ll_device_want_to_wakeup(st_data);
 		break;
 	case LL_WAKE_UP_ACK:	/* wake ack */
-		pr_info("wake ack rcvd");
+		pr_debug("wake ack rcvd");
 		st_data->ll_state = ST_LL_AWAKE;
 		break;
 	default:
 		pr_err(" unknown input/state ");
-		return -1;
+		return -EINVAL;
 	}
 	return 0;
 }