Merge tag 'asoc-v3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for v3.17

This has been a pretty exciting release in terms of the framework, we've
finally got support for multiple CODECs attached to a single DAI link
which has been something there's been interest in as long as I've been
working on ASoC.  A big thanks to Benoit and Misael for their work on
this.

Otherwise it's been a fairly standard release for development, including
more componentisation work from Lars-Peter and a good selection of both
CODEC and CPU drivers.

 - Support for multiple CODECs attached to a single DAI, enabling
   systems with for example multiple DAC/speaker drivers on a single
   link, contributed by Benoit Cousson based on work from Misael Lopez
   Cruz.
 - Support for byte controls larger than 256 bytes based on the use of
   TLVs contributed by Omair Mohammed Abdullah.
 - More componentisation work from Lars-Peter Clausen.
 - The remainder of the conversions of CODEC drivers to params_width()
 - Drivers for Cirrus Logic CS4265, Freescale i.MX ASRC blocks, Realtek
   RT286 and RT5670, Rockchip RK3xxx I2S controllers and Texas Instruments
   TAS2552.
 - Lots of updates and fixes, especially to the DaVinci, Intel,
   Freescale, Realtek, and rcar drivers.

12 files changed, 39 insertions, 37 deletions

diff --git a/drivers/iio/accel/bma180.c b/drivers/iio/accel/bma180.c
index a7e68c81f89d..a077cc86421b 100644
--- a/drivers/iio/accel/bma180.c
+++ b/drivers/iio/accel/bma180.c
@@ -68,13 +68,13 @@
 /* Defaults values */
 #define BMA180_DEF_PMODE	0
 #define BMA180_DEF_BW		20
-#define BMA180_DEF_SCALE	250
+#define BMA180_DEF_SCALE	2452
 
 /* Available values for sysfs */
 #define BMA180_FLP_FREQ_AVAILABLE \
 	"10 20 40 75 150 300"
 #define BMA180_SCALE_AVAILABLE \
-	"0.000130 0.000190 0.000250 0.000380 0.000500 0.000990 0.001980"
+	"0.001275 0.001863 0.002452 0.003727 0.004903 0.009709 0.019417"
 
 struct bma180_data {
 	struct i2c_client *client;
@@ -94,7 +94,7 @@ enum bma180_axis {
 };
 
 static int bw_table[] = { 10, 20, 40, 75, 150, 300 }; /* Hz */
-static int scale_table[] = { 130, 190, 250, 380, 500, 990, 1980 };
+static int scale_table[] = { 1275, 1863, 2452, 3727, 4903, 9709, 19417 };
 
 static int bma180_get_acc_reg(struct bma180_data *data, enum bma180_axis axis)
 {
@@ -376,6 +376,8 @@ static int bma180_write_raw(struct iio_dev *indio_dev,
 		mutex_unlock(&data->mutex);
 		return ret;
 	case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+		if (val2)
+			return -EINVAL;
 		mutex_lock(&data->mutex);
 		ret = bma180_set_bw(data, val);
 		mutex_unlock(&data->mutex);
diff --git a/drivers/iio/accel/hid-sensor-accel-3d.c b/drivers/iio/accel/hid-sensor-accel-3d.c
index 69abf9163df7..54e464e4bb72 100644
--- a/drivers/iio/accel/hid-sensor-accel-3d.c
+++ b/drivers/iio/accel/hid-sensor-accel-3d.c
@@ -110,7 +110,6 @@ static int accel_3d_read_raw(struct iio_dev *indio_dev,
 	struct accel_3d_state *accel_state = iio_priv(indio_dev);
 	int report_id = -1;
 	u32 address;
-	int ret;
 	int ret_type;
 	s32 poll_value;
 
@@ -151,14 +150,12 @@ static int accel_3d_read_raw(struct iio_dev *indio_dev,
 		ret_type = IIO_VAL_INT;
 		break;
 	case IIO_CHAN_INFO_SAMP_FREQ:
-		ret = hid_sensor_read_samp_freq_value(
+		ret_type = hid_sensor_read_samp_freq_value(
 			&accel_state->common_attributes, val, val2);
-		ret_type = IIO_VAL_INT_PLUS_MICRO;
 		break;
 	case IIO_CHAN_INFO_HYSTERESIS:
-		ret = hid_sensor_read_raw_hyst_value(
+		ret_type = hid_sensor_read_raw_hyst_value(
 			&accel_state->common_attributes, val, val2);
-		ret_type = IIO_VAL_INT_PLUS_MICRO;
 		break;
 	default:
 		ret_type = -EINVAL;
diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c
index 17aeea170566..2a5fa9a436e5 100644
--- a/drivers/iio/accel/mma8452.c
+++ b/drivers/iio/accel/mma8452.c
@@ -111,8 +111,14 @@ static const int mma8452_samp_freq[8][2] = {
 	{6, 250000}, {1, 560000}
 };
 
+/* 
+ * Hardware has fullscale of -2G, -4G, -8G corresponding to raw value -2048
+ * The userspace interface uses m/s^2 and we declare micro units
+ * So scale factor is given by:
+ * 	g * N * 1000000 / 2048 for N = 2, 4, 8 and g=9.80665
+ */
 static const int mma8452_scales[3][2] = {
-	{0, 977}, {0, 1953}, {0, 3906}
+	{0, 9577}, {0, 19154}, {0, 38307}
 };
 
 static ssize_t mma8452_show_samp_freq_avail(struct device *dev,
diff --git a/drivers/iio/adc/ti_am335x_adc.c b/drivers/iio/adc/ti_am335x_adc.c
index a4db3026bec6..d5dc4c6ce86c 100644
--- a/drivers/iio/adc/ti_am335x_adc.c
+++ b/drivers/iio/adc/ti_am335x_adc.c
@@ -374,7 +374,7 @@ static int tiadc_read_raw(struct iio_dev *indio_dev,
 			return -EAGAIN;
 		}
 	}
-	map_val = chan->channel + TOTAL_CHANNELS;
+	map_val = adc_dev->channel_step[chan->scan_index];
 
 	/*
 	 * We check the complete FIFO. We programmed just one entry but in case
diff --git a/drivers/iio/gyro/hid-sensor-gyro-3d.c b/drivers/iio/gyro/hid-sensor-gyro-3d.c
index 40f4e4935d0d..fa034a3dad78 100644
--- a/drivers/iio/gyro/hid-sensor-gyro-3d.c
+++ b/drivers/iio/gyro/hid-sensor-gyro-3d.c
@@ -110,7 +110,6 @@ static int gyro_3d_read_raw(struct iio_dev *indio_dev,
 	struct gyro_3d_state *gyro_state = iio_priv(indio_dev);
 	int report_id = -1;
 	u32 address;
-	int ret;
 	int ret_type;
 	s32 poll_value;
 
@@ -151,14 +150,12 @@ static int gyro_3d_read_raw(struct iio_dev *indio_dev,
 		ret_type = IIO_VAL_INT;
 		break;
 	case IIO_CHAN_INFO_SAMP_FREQ:
-		ret = hid_sensor_read_samp_freq_value(
+		ret_type = hid_sensor_read_samp_freq_value(
 			&gyro_state->common_attributes, val, val2);
-			ret_type = IIO_VAL_INT_PLUS_MICRO;
 		break;
 	case IIO_CHAN_INFO_HYSTERESIS:
-		ret = hid_sensor_read_raw_hyst_value(
+		ret_type = hid_sensor_read_raw_hyst_value(
 			&gyro_state->common_attributes, val, val2);
-		ret_type = IIO_VAL_INT_PLUS_MICRO;
 		break;
 	default:
 		ret_type = -EINVAL;
diff --git a/drivers/iio/industrialio-buffer.c b/drivers/iio/industrialio-buffer.c
index 36b1ae92e239..9f1a14009901 100644
--- a/drivers/iio/industrialio-buffer.c
+++ b/drivers/iio/industrialio-buffer.c
@@ -966,7 +966,7 @@ static int iio_buffer_update_demux(struct iio_dev *indio_dev,
 
 	/* Now we have the two masks, work from least sig and build up sizes */
 	for_each_set_bit(out_ind,
-			 indio_dev->active_scan_mask,
+			 buffer->scan_mask,
 			 indio_dev->masklength) {
 		in_ind = find_next_bit(indio_dev->active_scan_mask,
 				       indio_dev->masklength,
diff --git a/drivers/iio/industrialio-event.c b/drivers/iio/industrialio-event.c
index 258a973a1fb8..bfbf4d419f41 100644
--- a/drivers/iio/industrialio-event.c
+++ b/drivers/iio/industrialio-event.c
@@ -345,6 +345,9 @@ static int iio_device_add_event(struct iio_dev *indio_dev,
 			&indio_dev->event_interface->dev_attr_list);
 		kfree(postfix);
 
+		if ((ret == -EBUSY) && (shared_by != IIO_SEPARATE))
+			continue;
+
 		if (ret)
 			return ret;
 
diff --git a/drivers/iio/light/hid-sensor-als.c b/drivers/iio/light/hid-sensor-als.c
index f34c94380b41..96e71e103ea7 100644
--- a/drivers/iio/light/hid-sensor-als.c
+++ b/drivers/iio/light/hid-sensor-als.c
@@ -79,7 +79,6 @@ static int als_read_raw(struct iio_dev *indio_dev,
 	struct als_state *als_state = iio_priv(indio_dev);
 	int report_id = -1;
 	u32 address;
-	int ret;
 	int ret_type;
 	s32 poll_value;
 
@@ -129,14 +128,12 @@ static int als_read_raw(struct iio_dev *indio_dev,
 		ret_type = IIO_VAL_INT;
 		break;
 	case IIO_CHAN_INFO_SAMP_FREQ:
-		ret = hid_sensor_read_samp_freq_value(
+		ret_type = hid_sensor_read_samp_freq_value(
 				&als_state->common_attributes, val, val2);
-		ret_type = IIO_VAL_INT_PLUS_MICRO;
 		break;
 	case IIO_CHAN_INFO_HYSTERESIS:
-		ret = hid_sensor_read_raw_hyst_value(
+		ret_type = hid_sensor_read_raw_hyst_value(
 				&als_state->common_attributes, val, val2);
-		ret_type = IIO_VAL_INT_PLUS_MICRO;
 		break;
 	default:
 		ret_type = -EINVAL;
diff --git a/drivers/iio/light/hid-sensor-prox.c b/drivers/iio/light/hid-sensor-prox.c
index d203ef4d892f..412bae86d6ae 100644
--- a/drivers/iio/light/hid-sensor-prox.c
+++ b/drivers/iio/light/hid-sensor-prox.c
@@ -74,7 +74,6 @@ static int prox_read_raw(struct iio_dev *indio_dev,
 	struct prox_state *prox_state = iio_priv(indio_dev);
 	int report_id = -1;
 	u32 address;
-	int ret;
 	int ret_type;
 	s32 poll_value;
 
@@ -125,14 +124,12 @@ static int prox_read_raw(struct iio_dev *indio_dev,
 		ret_type = IIO_VAL_INT;
 		break;
 	case IIO_CHAN_INFO_SAMP_FREQ:
-		ret = hid_sensor_read_samp_freq_value(
+		ret_type = hid_sensor_read_samp_freq_value(
 				&prox_state->common_attributes, val, val2);
-		ret_type = IIO_VAL_INT_PLUS_MICRO;
 		break;
 	case IIO_CHAN_INFO_HYSTERESIS:
-		ret = hid_sensor_read_raw_hyst_value(
+		ret_type = hid_sensor_read_raw_hyst_value(
 				&prox_state->common_attributes, val, val2);
-		ret_type = IIO_VAL_INT_PLUS_MICRO;
 		break;
 	default:
 		ret_type = -EINVAL;
diff --git a/drivers/iio/light/tcs3472.c b/drivers/iio/light/tcs3472.c
index fe063a0a21cd..752569985d1d 100644
--- a/drivers/iio/light/tcs3472.c
+++ b/drivers/iio/light/tcs3472.c
@@ -52,6 +52,7 @@
 
 struct tcs3472_data {
 	struct i2c_client *client;
+	struct mutex lock;
 	u8 enable;
 	u8 control;
 	u8 atime;
@@ -116,10 +117,17 @@ static int tcs3472_read_raw(struct iio_dev *indio_dev,
 
 	switch (mask) {
 	case IIO_CHAN_INFO_RAW:
+		if (iio_buffer_enabled(indio_dev))
+			return -EBUSY;
+
+		mutex_lock(&data->lock);
 		ret = tcs3472_req_data(data);
-		if (ret < 0)
+		if (ret < 0) {
+			mutex_unlock(&data->lock);
 			return ret;
+		}
 		ret = i2c_smbus_read_word_data(data->client, chan->address);
+		mutex_unlock(&data->lock);
 		if (ret < 0)
 			return ret;
 		*val = ret;
@@ -255,6 +263,7 @@ static int tcs3472_probe(struct i2c_client *client,
 	data = iio_priv(indio_dev);
 	i2c_set_clientdata(client, indio_dev);
 	data->client = client;
+	mutex_init(&data->lock);
 
 	indio_dev->dev.parent = &client->dev;
 	indio_dev->info = &tcs3472_info;
diff --git a/drivers/iio/magnetometer/hid-sensor-magn-3d.c b/drivers/iio/magnetometer/hid-sensor-magn-3d.c
index 41cf29e2a371..b2b0937d5133 100644
--- a/drivers/iio/magnetometer/hid-sensor-magn-3d.c
+++ b/drivers/iio/magnetometer/hid-sensor-magn-3d.c
@@ -110,7 +110,6 @@ static int magn_3d_read_raw(struct iio_dev *indio_dev,
 	struct magn_3d_state *magn_state = iio_priv(indio_dev);
 	int report_id = -1;
 	u32 address;
-	int ret;
 	int ret_type;
 	s32 poll_value;
 
@@ -153,14 +152,12 @@ static int magn_3d_read_raw(struct iio_dev *indio_dev,
 		ret_type = IIO_VAL_INT;
 		break;
 	case IIO_CHAN_INFO_SAMP_FREQ:
-		ret = hid_sensor_read_samp_freq_value(
+		ret_type = hid_sensor_read_samp_freq_value(
 			&magn_state->common_attributes, val, val2);
-		ret_type = IIO_VAL_INT_PLUS_MICRO;
 		break;
 	case IIO_CHAN_INFO_HYSTERESIS:
-		ret = hid_sensor_read_raw_hyst_value(
+		ret_type = hid_sensor_read_raw_hyst_value(
 			&magn_state->common_attributes, val, val2);
-		ret_type = IIO_VAL_INT_PLUS_MICRO;
 		break;
 	default:
 		ret_type = -EINVAL;
diff --git a/drivers/iio/pressure/hid-sensor-press.c b/drivers/iio/pressure/hid-sensor-press.c
index 1cd190c73788..2c0d2a4fed8c 100644
--- a/drivers/iio/pressure/hid-sensor-press.c
+++ b/drivers/iio/pressure/hid-sensor-press.c
@@ -78,7 +78,6 @@ static int press_read_raw(struct iio_dev *indio_dev,
 	struct press_state *press_state = iio_priv(indio_dev);
 	int report_id = -1;
 	u32 address;
-	int ret;
 	int ret_type;
 	s32 poll_value;
 
@@ -128,14 +127,12 @@ static int press_read_raw(struct iio_dev *indio_dev,
 		ret_type = IIO_VAL_INT;
 		break;
 	case IIO_CHAN_INFO_SAMP_FREQ:
-		ret = hid_sensor_read_samp_freq_value(
+		ret_type = hid_sensor_read_samp_freq_value(
 				&press_state->common_attributes, val, val2);
-		ret_type = IIO_VAL_INT_PLUS_MICRO;
 		break;
 	case IIO_CHAN_INFO_HYSTERESIS:
-		ret = hid_sensor_read_raw_hyst_value(
+		ret_type = hid_sensor_read_raw_hyst_value(
 				&press_state->common_attributes, val, val2);
-		ret_type = IIO_VAL_INT_PLUS_MICRO;
 		break;
 	default:
 		ret_type = -EINVAL;