Merge tag 'iio-for-4.19b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Second set of IIO new device support, features and cleanups.

There are also a couple of fixes that can wait for the coming merge
window.

Core new features

* Support for phase channels (used in time of flight sensors amongst
  other things)
* Support for deep UV light channel modifier.

New Device Support

* AD4758 DAC
  - New driver and dt bindings.
* adxl345
  - Support the adxl375 +-200g part which is register compatible.
* isl29501 Time of flight sensor.
  - New driver
* meson-saradc
  - Support the Meson8m2 Socs - right now this is just an ID, but there will
    be additional difference in future.
* mpu6050
  - New ID for 6515 variant.
* si1133 UV sensor.
  - New driver
* Spreadtrum SC27xx PMIC ADC
  - New driver and dt bindings.

Features

* adxl345
  - Add calibration offset readback and writing.
  - Add sampling frequency control.

Fixes and Cleanups

* ad5933
  - Use a macro for the channel definition to reduce duplication.
* ad9523
  - Replace use of core mlock with a local lock. Part of ongoing efforts
    to avoid confusing the purpose of mlock which is only about iio core
    state changes.
  - Fix displayed phase which was out by a factor of 10.
* adxl345
  - Add a link to the datasheet.
  - Rework the use of the address field in the chan_spec structures to
    allow addition of more per channel information.
* adis imu
  - Mark switch fall throughs.
* at91-sama5d2
  - Fix some casting on big endian systems.
* bmp280
  - Drop some DT elements that aren't used and should mostly be done from
    userspace rather than in DT.
* hx711
  - add clock-frequency dt binding and resulting delay to deal with capacitance
    issue on some boards.
  - fix a spurious unit-address in the example.
* ina2xx
  - Avoid a possible kthread_stop with a stale task_struct.
* ltc2632
  - Remove some unused local variables (assigned but value never used).
* max1363
  - Use device_get_match_data to remove some boilerplate.
* mma8452
  - Mark switch fall throughs.
* sca3000
  - Fix a missing return in a switch statement (a bad fallthrough
    previously!)
* sigma-delta-modulator
  - Drop incorrect unit address from the DT example.
* st_accel
  - Use device_get_match_data to drop some boiler plate.
  - Move to probe_new for i2c driver as second parameter not used.
* st_sensors library
  - Use a strlcpy (safe in this case).
* st_lsm6dsx
  - Add some error logging.
* ti-ads7950
  - SPDX
  - Allow simultaneous buffered and polled reads. Needed on a Lego Mindstorms
    EV3 where some channels are used for power supply monitoring at a very low
    rate.
* ti-dac5571
  - Remove an unused variable.
* xadc
  - Drop some dead code.

3 files changed, 1081 insertions, 0 deletions

diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
index c7ef8d1862d6..f17f701a9b61 100644
--- a/drivers/iio/light/Kconfig
+++ b/drivers/iio/light/Kconfig
@@ -1,3 +1,4 @@
+
 #
 # Light sensors
 #
@@ -319,6 +320,17 @@ config PA12203001
          This driver can also be built as a module.  If so, the module
          will be called pa12203001.
 
+config SI1133
+	tristate "SI1133 UV Index Sensor and Ambient Light Sensor"
+	depends on I2C
+	select REGMAP_I2C
+	  help
+	  Say Y here if you want to build a driver for the Silicon Labs SI1133
+	  UV Index Sensor and Ambient Light Sensor chip.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called si1133.
+
 config SI1145
 	tristate "SI1132 and SI1141/2/3/5/6/7 combined ALS, UV index and proximity sensor"
 	depends on I2C
diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile
index 80943af5d627..86337b114bc4 100644
--- a/drivers/iio/light/Makefile
+++ b/drivers/iio/light/Makefile
@@ -32,6 +32,7 @@ obj-$(CONFIG_OPT3001)		+= opt3001.o
 obj-$(CONFIG_PA12203001)	+= pa12203001.o
 obj-$(CONFIG_RPR0521)		+= rpr0521.o
 obj-$(CONFIG_SENSORS_TSL2563)	+= tsl2563.o
+obj-$(CONFIG_SI1133)		+= si1133.o
 obj-$(CONFIG_SI1145)		+= si1145.o
 obj-$(CONFIG_STK3310)          += stk3310.o
 obj-$(CONFIG_ST_UVIS25)		+= st_uvis25_core.o
diff --git a/drivers/iio/light/si1133.c b/drivers/iio/light/si1133.c
new file mode 100644
index 000000000000..d3fbeb3bc463
--- /dev/null
+++ b/drivers/iio/light/si1133.c
@@ -0,0 +1,1068 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * si1133.c - Support for Silabs SI1133 combined ambient
+ * light and UV index sensors
+ *
+ * Copyright 2018 Maxime Roussin-Belanger <maxime.roussinbelanger@gmail.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+#include <linux/util_macros.h>
+
+#define SI1133_REG_PART_ID		0x00
+#define SI1133_REG_REV_ID		0x01
+#define SI1133_REG_MFR_ID		0x02
+#define SI1133_REG_INFO0		0x03
+#define SI1133_REG_INFO1		0x04
+
+#define SI1133_PART_ID			0x33
+
+#define SI1133_REG_HOSTIN0		0x0A
+#define SI1133_REG_COMMAND		0x0B
+#define SI1133_REG_IRQ_ENABLE		0x0F
+#define SI1133_REG_RESPONSE1		0x10
+#define SI1133_REG_RESPONSE0		0x11
+#define SI1133_REG_IRQ_STATUS		0x12
+#define SI1133_REG_MEAS_RATE		0x1A
+
+#define SI1133_IRQ_CHANNEL_ENABLE	0xF
+
+#define SI1133_CMD_RESET_CTR		0x00
+#define SI1133_CMD_RESET_SW		0x01
+#define SI1133_CMD_FORCE		0x11
+#define SI1133_CMD_START_AUTONOMOUS	0x13
+#define SI1133_CMD_PARAM_SET		0x80
+#define SI1133_CMD_PARAM_QUERY		0x40
+#define SI1133_CMD_PARAM_MASK		0x3F
+
+#define SI1133_CMD_ERR_MASK		BIT(4)
+#define SI1133_CMD_SEQ_MASK		0xF
+#define SI1133_MAX_CMD_CTR		0xF
+
+#define SI1133_PARAM_REG_CHAN_LIST	0x01
+#define SI1133_PARAM_REG_ADCCONFIG(x)	((x) * 4) + 2
+#define SI1133_PARAM_REG_ADCSENS(x)	((x) * 4) + 3
+#define SI1133_PARAM_REG_ADCPOST(x)	((x) * 4) + 4
+
+#define SI1133_ADCMUX_MASK 0x1F
+
+#define SI1133_ADCCONFIG_DECIM_RATE(x)	(x) << 5
+
+#define SI1133_ADCSENS_SCALE_MASK 0x70
+#define SI1133_ADCSENS_SCALE_SHIFT 4
+#define SI1133_ADCSENS_HSIG_MASK BIT(7)
+#define SI1133_ADCSENS_HSIG_SHIFT 7
+#define SI1133_ADCSENS_HW_GAIN_MASK 0xF
+#define SI1133_ADCSENS_NB_MEAS(x)	fls(x) << SI1133_ADCSENS_SCALE_SHIFT
+
+#define SI1133_ADCPOST_24BIT_EN BIT(6)
+#define SI1133_ADCPOST_POSTSHIFT_BITQTY(x) (x & GENMASK(2, 0)) << 3
+
+#define SI1133_PARAM_ADCMUX_SMALL_IR	0x0
+#define SI1133_PARAM_ADCMUX_MED_IR	0x1
+#define SI1133_PARAM_ADCMUX_LARGE_IR	0x2
+#define SI1133_PARAM_ADCMUX_WHITE	0xB
+#define SI1133_PARAM_ADCMUX_LARGE_WHITE	0xD
+#define SI1133_PARAM_ADCMUX_UV		0x18
+#define SI1133_PARAM_ADCMUX_UV_DEEP	0x19
+
+#define SI1133_ERR_INVALID_CMD		0x0
+#define SI1133_ERR_INVALID_LOCATION_CMD 0x1
+#define SI1133_ERR_SATURATION_ADC_OR_OVERFLOW_ACCUMULATION 0x2
+#define SI1133_ERR_OUTPUT_BUFFER_OVERFLOW 0x3
+
+#define SI1133_COMPLETION_TIMEOUT_MS	500
+
+#define SI1133_CMD_MINSLEEP_US_LOW	5000
+#define SI1133_CMD_MINSLEEP_US_HIGH	7500
+#define SI1133_CMD_TIMEOUT_MS		25
+#define SI1133_CMD_LUX_TIMEOUT_MS	5000
+#define SI1133_CMD_TIMEOUT_US		SI1133_CMD_TIMEOUT_MS * 1000
+
+#define SI1133_REG_HOSTOUT(x)		(x) + 0x13
+
+#define SI1133_MEASUREMENT_FREQUENCY 1250
+
+#define SI1133_X_ORDER_MASK            0x0070
+#define SI1133_Y_ORDER_MASK            0x0007
+#define si1133_get_x_order(m)          ((m) & SI1133_X_ORDER_MASK) >> 4
+#define si1133_get_y_order(m)          ((m) & SI1133_Y_ORDER_MASK)
+
+#define SI1133_LUX_ADC_MASK		0xE
+#define SI1133_ADC_THRESHOLD		16000
+#define SI1133_INPUT_FRACTION_HIGH	7
+#define SI1133_INPUT_FRACTION_LOW	15
+#define SI1133_LUX_OUTPUT_FRACTION	12
+#define SI1133_LUX_BUFFER_SIZE		9
+
+static const int si1133_scale_available[] = {
+	1, 2, 4, 8, 16, 32, 64, 128};
+
+static IIO_CONST_ATTR(scale_available, "1 2 4 8 16 32 64 128");
+
+static IIO_CONST_ATTR_INT_TIME_AVAIL("0.0244 0.0488 0.0975 0.195 0.390 0.780 "
+				     "1.560 3.120 6.24 12.48 25.0 50.0");
+
+/* A.K.A. HW_GAIN in datasheet */
+enum si1133_int_time {
+	    _24_4_us = 0,
+	    _48_8_us = 1,
+	    _97_5_us = 2,
+	   _195_0_us = 3,
+	   _390_0_us = 4,
+	   _780_0_us = 5,
+	 _1_560_0_us = 6,
+	 _3_120_0_us = 7,
+	 _6_240_0_us = 8,
+	_12_480_0_us = 9,
+	_25_ms = 10,
+	_50_ms = 11,
+};
+
+/* Integration time in milliseconds, nanoseconds */
+static const int si1133_int_time_table[][2] = {
+	[_24_4_us] = {0, 24400},
+	[_48_8_us] = {0, 48800},
+	[_97_5_us] = {0, 97500},
+	[_195_0_us] = {0, 195000},
+	[_390_0_us] = {0, 390000},
+	[_780_0_us] = {0, 780000},
+	[_1_560_0_us] = {1, 560000},
+	[_3_120_0_us] = {3, 120000},
+	[_6_240_0_us] = {6, 240000},
+	[_12_480_0_us] = {12, 480000},
+	[_25_ms] = {25, 000000},
+	[_50_ms] = {50, 000000},
+};
+
+static const struct regmap_range si1133_reg_ranges[] = {
+	regmap_reg_range(0x00, 0x02),
+	regmap_reg_range(0x0A, 0x0B),
+	regmap_reg_range(0x0F, 0x0F),
+	regmap_reg_range(0x10, 0x12),
+	regmap_reg_range(0x13, 0x2C),
+};
+
+static const struct regmap_range si1133_reg_ro_ranges[] = {
+	regmap_reg_range(0x00, 0x02),
+	regmap_reg_range(0x10, 0x2C),
+};
+
+static const struct regmap_range si1133_precious_ranges[] = {
+	regmap_reg_range(0x12, 0x12),
+};
+
+static const struct regmap_access_table si1133_write_ranges_table = {
+	.yes_ranges	= si1133_reg_ranges,
+	.n_yes_ranges	= ARRAY_SIZE(si1133_reg_ranges),
+	.no_ranges	= si1133_reg_ro_ranges,
+	.n_no_ranges	= ARRAY_SIZE(si1133_reg_ro_ranges),
+};
+
+static const struct regmap_access_table si1133_read_ranges_table = {
+	.yes_ranges	= si1133_reg_ranges,
+	.n_yes_ranges	= ARRAY_SIZE(si1133_reg_ranges),
+};
+
+static const struct regmap_access_table si1133_precious_table = {
+	.yes_ranges	= si1133_precious_ranges,
+	.n_yes_ranges	= ARRAY_SIZE(si1133_precious_ranges),
+};
+
+static const struct regmap_config si1133_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = 0x2C,
+
+	.wr_table = &si1133_write_ranges_table,
+	.rd_table = &si1133_read_ranges_table,
+
+	.precious_table = &si1133_precious_table,
+};
+
+struct si1133_data {
+	struct regmap *regmap;
+	struct i2c_client *client;
+
+	/* Lock protecting one command at a time can be processed */
+	struct mutex mutex;
+
+	int rsp_seq;
+	u8 scan_mask;
+	u8 adc_sens[6];
+	u8 adc_config[6];
+
+	struct completion completion;
+};
+
+struct si1133_coeff {
+	s16 info;
+	u16 mag;
+};
+
+struct si1133_lux_coeff {
+	struct si1133_coeff coeff_high[4];
+	struct si1133_coeff coeff_low[9];
+};
+
+static const struct si1133_lux_coeff lux_coeff = {
+	{
+		{  0,   209},
+		{ 1665,  93},
+		{ 2064,  65},
+		{-2671, 234}
+	},
+	{
+		{    0,     0},
+		{ 1921, 29053},
+		{-1022, 36363},
+		{ 2320, 20789},
+		{ -367, 57909},
+		{-1774, 38240},
+		{ -608, 46775},
+		{-1503, 51831},
+		{-1886, 58928}
+	}
+};
+
+static int si1133_calculate_polynomial_inner(u32 input, u8 fraction, u16 mag,
+					     s8 shift)
+{
+	return ((input << fraction) / mag) << shift;
+}
+
+static int si1133_calculate_output(u32 x, u32 y, u8 x_order, u8 y_order,
+				   u8 input_fraction, s8 sign,
+				   const struct si1133_coeff *coeffs)
+{
+	s8 shift;
+	int x1 = 1;
+	int x2 = 1;
+	int y1 = 1;
+	int y2 = 1;
+
+	shift = ((u16)coeffs->info & 0xFF00) >> 8;
+	shift ^= 0xFF;
+	shift += 1;
+	shift = -shift;
+
+	if (x_order > 0) {
+		x1 = si1133_calculate_polynomial_inner(x, input_fraction,
+						       coeffs->mag, shift);
+		if (x_order > 1)
+			x2 = x1;
+	}
+
+	if (y_order > 0) {
+		y1 = si1133_calculate_polynomial_inner(y, input_fraction,
+						       coeffs->mag, shift);
+		if (y_order > 1)
+			y2 = y1;
+	}
+
+	return sign * x1 * x2 * y1 * y2;
+}
+
+/*
+ * The algorithm is from:
+ * https://siliconlabs.github.io/Gecko_SDK_Doc/efm32zg/html/si1133_8c_source.html#l00716
+ */
+static int si1133_calc_polynomial(u32 x, u32 y, u8 input_fraction, u8 num_coeff,
+				  const struct si1133_coeff *coeffs)
+{
+	u8 x_order, y_order;
+	u8 counter;
+	s8 sign;
+	int output = 0;
+
+	for (counter = 0; counter < num_coeff; counter++) {
+		if (coeffs->info < 0)
+			sign = -1;
+		else
+			sign = 1;
+
+		x_order = si1133_get_x_order(coeffs->info);
+		y_order = si1133_get_y_order(coeffs->info);
+
+		if ((x_order == 0) && (y_order == 0))
+			output +=
+			       sign * coeffs->mag << SI1133_LUX_OUTPUT_FRACTION;
+		else
+			output += si1133_calculate_output(x, y, x_order,
+							  y_order,
+							  input_fraction, sign,
+							  coeffs);
+		coeffs++;
+	}
+
+	return abs(output);
+}
+
+static int si1133_cmd_reset_sw(struct si1133_data *data)
+{
+	struct device *dev = &data->client->dev;
+	unsigned int resp;
+	unsigned long timeout;
+	int err;
+
+	err = regmap_write(data->regmap, SI1133_REG_COMMAND,
+			   SI1133_CMD_RESET_SW);
+	if (err)
+		return err;
+
+	timeout = jiffies + msecs_to_jiffies(SI1133_CMD_TIMEOUT_MS);
+	while (true) {
+		err = regmap_read(data->regmap, SI1133_REG_RESPONSE0, &resp);
+		if (err == -ENXIO) {
+			usleep_range(SI1133_CMD_MINSLEEP_US_LOW,
+				     SI1133_CMD_MINSLEEP_US_HIGH);
+			continue;
+		}
+
+		if ((resp & SI1133_MAX_CMD_CTR) == SI1133_MAX_CMD_CTR)
+			break;
+
+		if (time_after(jiffies, timeout)) {
+			dev_warn(dev, "Timeout on reset ctr resp: %d\n", resp);
+			return -ETIMEDOUT;
+		}
+	}
+
+	if (!err)
+		data->rsp_seq = SI1133_MAX_CMD_CTR;
+
+	return err;
+}
+
+static int si1133_parse_response_err(struct device *dev, u32 resp, u8 cmd)
+{
+	resp &= 0xF;
+
+	switch (resp) {
+	case SI1133_ERR_OUTPUT_BUFFER_OVERFLOW:
+		dev_warn(dev, "Output buffer overflow: %#02hhx\n", cmd);
+		return -EOVERFLOW;
+	case SI1133_ERR_SATURATION_ADC_OR_OVERFLOW_ACCUMULATION:
+		dev_warn(dev, "Saturation of the ADC or overflow of accumulation: %#02hhx\n",
+			 cmd);
+		return -EOVERFLOW;
+	case SI1133_ERR_INVALID_LOCATION_CMD:
+		dev_warn(dev,
+			 "Parameter access to an invalid location: %#02hhx\n",
+			 cmd);
+		return -EINVAL;
+	case SI1133_ERR_INVALID_CMD:
+		dev_warn(dev, "Invalid command %#02hhx\n", cmd);
+		return -EINVAL;
+	default:
+		dev_warn(dev, "Unknown error %#02hhx\n", cmd);
+		return -EINVAL;
+	}
+}
+
+static int si1133_cmd_reset_counter(struct si1133_data *data)
+{
+	int err = regmap_write(data->regmap, SI1133_REG_COMMAND,
+			       SI1133_CMD_RESET_CTR);
+	if (err)
+		return err;
+
+	data->rsp_seq = 0;
+
+	return 0;
+}
+
+static int si1133_command(struct si1133_data *data, u8 cmd)
+{
+	struct device *dev = &data->client->dev;
+	u32 resp;
+	int err;
+	int expected_seq;
+
+	mutex_lock(&data->mutex);
+
+	expected_seq = (data->rsp_seq + 1) & SI1133_MAX_CMD_CTR;
+
+	if (cmd == SI1133_CMD_FORCE)
+		reinit_completion(&data->completion);
+
+	err = regmap_write(data->regmap, SI1133_REG_COMMAND, cmd);
+	if (err) {
+		dev_warn(dev, "Failed to write command %#02hhx, ret=%d\n", cmd,
+			 err);
+		goto out;
+	}
+
+	if (cmd == SI1133_CMD_FORCE) {
+		/* wait for irq */
+		if (!wait_for_completion_timeout(&data->completion,
+			msecs_to_jiffies(SI1133_COMPLETION_TIMEOUT_MS))) {
+			err = -ETIMEDOUT;
+			goto out;
+		}
+	} else {
+		err = regmap_read_poll_timeout(data->regmap,
+					       SI1133_REG_RESPONSE0, resp,
+					       (resp & SI1133_CMD_SEQ_MASK) ==
+					       expected_seq ||
+					       (resp & SI1133_CMD_ERR_MASK),
+					       SI1133_CMD_MINSLEEP_US_LOW,
+					       SI1133_CMD_TIMEOUT_MS * 1000);
+		if (err) {
+			dev_warn(dev,
+				 "Failed to read command %#02hhx, ret=%d\n",
+				 cmd, err);
+			goto out;
+		}
+	}
+
+	if (resp & SI1133_CMD_ERR_MASK) {
+		err = si1133_parse_response_err(dev, resp, cmd);
+		si1133_cmd_reset_counter(data);
+	} else {
+		data->rsp_seq = expected_seq;
+	}
+
+out:
+	mutex_unlock(&data->mutex);
+
+	return err;
+}
+
+static int si1133_param_set(struct si1133_data *data, u8 param, u32 value)
+{
+	int err = regmap_write(data->regmap, SI1133_REG_HOSTIN0, value);
+
+	if (err)
+		return err;
+
+	return si1133_command(data, SI1133_CMD_PARAM_SET |
+			      (param & SI1133_CMD_PARAM_MASK));
+}
+
+static int si1133_param_query(struct si1133_data *data, u8 param, u32 *result)
+{
+	int err = si1133_command(data, SI1133_CMD_PARAM_QUERY |
+				 (param & SI1133_CMD_PARAM_MASK));
+	if (err)
+		return err;
+
+	return regmap_read(data->regmap, SI1133_REG_RESPONSE1, result);
+}
+
+#define SI1133_CHANNEL(_ch, _type) \
+	.type = _type, \
+	.channel = _ch, \
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+	.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_INT_TIME) | \
+		BIT(IIO_CHAN_INFO_SCALE) | \
+		BIT(IIO_CHAN_INFO_HARDWAREGAIN), \
+
+static const struct iio_chan_spec si1133_channels[] = {
+	{
+		.type = IIO_LIGHT,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+		.channel = 0,
+	},
+	{
+		SI1133_CHANNEL(SI1133_PARAM_ADCMUX_WHITE, IIO_INTENSITY)
+		.channel2 = IIO_MOD_LIGHT_BOTH,
+	},
+	{
+		SI1133_CHANNEL(SI1133_PARAM_ADCMUX_LARGE_WHITE, IIO_INTENSITY)
+		.channel2 = IIO_MOD_LIGHT_BOTH,
+		.extend_name = "large",
+	},
+	{
+		SI1133_CHANNEL(SI1133_PARAM_ADCMUX_SMALL_IR, IIO_INTENSITY)
+		.extend_name = "small",
+		.modified = 1,
+		.channel2 = IIO_MOD_LIGHT_IR,
+	},
+	{
+		SI1133_CHANNEL(SI1133_PARAM_ADCMUX_MED_IR, IIO_INTENSITY)
+		.modified = 1,
+		.channel2 = IIO_MOD_LIGHT_IR,
+	},
+	{
+		SI1133_CHANNEL(SI1133_PARAM_ADCMUX_LARGE_IR, IIO_INTENSITY)
+		.extend_name = "large",
+		.modified = 1,
+		.channel2 = IIO_MOD_LIGHT_IR,
+	},
+	{
+		SI1133_CHANNEL(SI1133_PARAM_ADCMUX_UV, IIO_UVINDEX)
+	},
+	{
+		SI1133_CHANNEL(SI1133_PARAM_ADCMUX_UV_DEEP, IIO_UVINDEX)
+		.modified = 1,
+		.channel2 = IIO_MOD_LIGHT_DUV,
+	}
+};
+
+static int si1133_get_int_time_index(int milliseconds, int nanoseconds)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(si1133_int_time_table); i++) {
+		if (milliseconds == si1133_int_time_table[i][0] &&
+		    nanoseconds == si1133_int_time_table[i][1])
+			return i;
+	}
+	return -EINVAL;
+}
+
+static int si1133_set_integration_time(struct si1133_data *data, u8 adc,
+				       int milliseconds, int nanoseconds)
+{
+	int index;
+
+	index = si1133_get_int_time_index(milliseconds, nanoseconds);
+	if (index < 0)
+		return index;
+
+	data->adc_sens[adc] &= 0xF0;
+	data->adc_sens[adc] |= index;
+
+	return si1133_param_set(data, SI1133_PARAM_REG_ADCSENS(0),
+				data->adc_sens[adc]);
+}
+
+static int si1133_set_chlist(struct si1133_data *data, u8 scan_mask)
+{
+	/* channel list already set, no need to reprogram */
+	if (data->scan_mask == scan_mask)
+		return 0;
+
+	data->scan_mask = scan_mask;
+
+	return si1133_param_set(data, SI1133_PARAM_REG_CHAN_LIST, scan_mask);
+}
+
+static int si1133_chan_set_adcconfig(struct si1133_data *data, u8 adc,
+				     u8 adc_config)
+{
+	int err;
+
+	err = si1133_param_set(data, SI1133_PARAM_REG_ADCCONFIG(adc),
+			       adc_config);
+	if (err)
+		return err;
+
+	data->adc_config[adc] = adc_config;
+
+	return 0;
+}
+
+static int si1133_update_adcconfig(struct si1133_data *data, uint8_t adc,
+				   u8 mask, u8 shift, u8 value)
+{
+	u32 adc_config;
+	int err;
+
+	err = si1133_param_query(data, SI1133_PARAM_REG_ADCCONFIG(adc),
+				 &adc_config);
+	if (err)
+		return err;
+
+	adc_config &= ~mask;
+	adc_config |= (value << shift);
+
+	return si1133_chan_set_adcconfig(data, adc, adc_config);
+}
+
+static int si1133_set_adcmux(struct si1133_data *data, u8 adc, u8 mux)
+{
+	if ((mux & data->adc_config[adc]) == mux)
+		return 0; /* mux already set to correct value */
+
+	return si1133_update_adcconfig(data, adc, SI1133_ADCMUX_MASK, 0, mux);
+}
+
+static int si1133_force_measurement(struct si1133_data *data)
+{
+	return si1133_command(data, SI1133_CMD_FORCE);
+}
+
+static int si1133_bulk_read(struct si1133_data *data, u8 start_reg, u8 length,
+			    u8 *buffer)
+{
+	int err;
+
+	err = si1133_force_measurement(data);
+	if (err)
+		return err;
+
+	return regmap_bulk_read(data->regmap, start_reg, buffer, length);
+}
+
+static int si1133_measure(struct si1133_data *data,
+			  struct iio_chan_spec const *chan,
+			  int *val)
+{
+	int err;
+
+	__be16 resp;
+
+	err = si1133_set_adcmux(data, 0, chan->channel);
+	if (err)
+		return err;
+
+	/* Deactivate lux measurements if they were active */
+	err = si1133_set_chlist(data, BIT(0));
+	if (err)
+		return err;
+
+	err = si1133_bulk_read(data, SI1133_REG_HOSTOUT(0), sizeof(resp),
+			       (u8 *)&resp);
+	if (err)
+		return err;
+
+	*val = be16_to_cpu(resp);
+
+	return err;
+}
+
+static irqreturn_t si1133_threaded_irq_handler(int irq, void *private)
+{
+	struct iio_dev *iio_dev = private;
+	struct si1133_data *data = iio_priv(iio_dev);
+	u32 irq_status;
+	int err;
+
+	err = regmap_read(data->regmap, SI1133_REG_IRQ_STATUS, &irq_status);
+	if (err) {
+		dev_err_ratelimited(&iio_dev->dev, "Error reading IRQ\n");
+		goto out;
+	}
+
+	if (irq_status != data->scan_mask)
+		return IRQ_NONE;
+
+out:
+	complete(&data->completion);
+
+	return IRQ_HANDLED;
+}
+
+static int si1133_scale_to_swgain(int scale_integer, int scale_fractional)
+{
+	scale_integer = find_closest(scale_integer, si1133_scale_available,
+				     ARRAY_SIZE(si1133_scale_available));
+	if (scale_integer < 0 ||
+	    scale_integer > ARRAY_SIZE(si1133_scale_available) ||
+	    scale_fractional != 0)
+		return -EINVAL;
+
+	return scale_integer;
+}
+
+static int si1133_chan_set_adcsens(struct si1133_data *data, u8 adc,
+				   u8 adc_sens)
+{
+	int err;
+
+	err = si1133_param_set(data, SI1133_PARAM_REG_ADCSENS(adc), adc_sens);
+	if (err)
+		return err;
+
+	data->adc_sens[adc] = adc_sens;
+
+	return 0;
+}
+
+static int si1133_update_adcsens(struct si1133_data *data, u8 mask,
+				 u8 shift, u8 value)
+{
+	int err;
+	u32 adc_sens;
+
+	err = si1133_param_query(data, SI1133_PARAM_REG_ADCSENS(0),
+				 &adc_sens);
+	if (err)
+		return err;
+
+	adc_sens &= ~mask;
+	adc_sens |= (value << shift);
+
+	return si1133_chan_set_adcsens(data, 0, adc_sens);
+}
+
+static int si1133_get_lux(struct si1133_data *data, int *val)
+{
+	int err;
+	int lux;
+	u32 high_vis;
+	u32 low_vis;
+	u32 ir;
+	u8 buffer[SI1133_LUX_BUFFER_SIZE];
+
+	/* Activate lux channels */
+	err = si1133_set_chlist(data, SI1133_LUX_ADC_MASK);
+	if (err)
+		return err;
+
+	err = si1133_bulk_read(data, SI1133_REG_HOSTOUT(0),
+			       SI1133_LUX_BUFFER_SIZE, buffer);
+	if (err)
+		return err;
+
+	high_vis = (buffer[0] << 16) | (buffer[1] << 8) | buffer[2];
+	low_vis = (buffer[3] << 16) | (buffer[4] << 8) | buffer[5];
+	ir = (buffer[6] << 16) | (buffer[7] << 8) | buffer[8];
+
+	if (high_vis > SI1133_ADC_THRESHOLD || ir > SI1133_ADC_THRESHOLD)
+		lux = si1133_calc_polynomial(high_vis, ir,
+					     SI1133_INPUT_FRACTION_HIGH,
+					     ARRAY_SIZE(lux_coeff.coeff_high),
+					     &lux_coeff.coeff_high[0]);
+	else
+		lux = si1133_calc_polynomial(low_vis, ir,
+					     SI1133_INPUT_FRACTION_LOW,
+					     ARRAY_SIZE(lux_coeff.coeff_low),
+					     &lux_coeff.coeff_low[0]);
+
+	*val = lux >> SI1133_LUX_OUTPUT_FRACTION;
+
+	return err;
+}
+
+static int si1133_read_raw(struct iio_dev *iio_dev,
+			   struct iio_chan_spec const *chan,
+			   int *val, int *val2, long mask)
+{
+	struct si1133_data *data = iio_priv(iio_dev);
+	u8 adc_sens = data->adc_sens[0];
+	int err;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_PROCESSED:
+		switch (chan->type) {
+		case IIO_LIGHT:
+			err = si1133_get_lux(data, val);
+			if (err)
+				return err;
+
+			return IIO_VAL_INT;
+		default:
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_RAW:
+		switch (chan->type) {
+		case IIO_INTENSITY:
+		case IIO_UVINDEX:
+			err = si1133_measure(data, chan, val);
+			if (err)
+				return err;
+
+			return IIO_VAL_INT;
+		default:
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_INT_TIME:
+		switch (chan->type) {
+		case IIO_INTENSITY:
+		case IIO_UVINDEX:
+			adc_sens &= SI1133_ADCSENS_HW_GAIN_MASK;
+
+			*val = si1133_int_time_table[adc_sens][0];
+			*val2 = si1133_int_time_table[adc_sens][1];
+			return IIO_VAL_INT_PLUS_MICRO;
+		default:
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->type) {
+		case IIO_INTENSITY:
+		case IIO_UVINDEX:
+			adc_sens &= SI1133_ADCSENS_SCALE_MASK;
+			adc_sens >>= SI1133_ADCSENS_SCALE_SHIFT;
+
+			*val = BIT(adc_sens);
+
+			return IIO_VAL_INT;
+		default:
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_HARDWAREGAIN:
+		switch (chan->type) {
+		case IIO_INTENSITY:
+		case IIO_UVINDEX:
+			adc_sens >>= SI1133_ADCSENS_HSIG_SHIFT;
+
+			*val = adc_sens;
+
+			return IIO_VAL_INT;
+		default:
+			return -EINVAL;
+		}
+	default:
+		return -EINVAL;
+	}
+}
+
+static int si1133_write_raw(struct iio_dev *iio_dev,
+			    struct iio_chan_spec const *chan,
+			    int val, int val2, long mask)
+{
+	struct si1133_data *data = iio_priv(iio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->type) {
+		case IIO_INTENSITY:
+		case IIO_UVINDEX:
+			val = si1133_scale_to_swgain(val, val2);
+			if (val < 0)
+				return val;
+
+			return si1133_update_adcsens(data,
+						     SI1133_ADCSENS_SCALE_MASK,
+						     SI1133_ADCSENS_SCALE_SHIFT,
+						     val);
+		default:
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_INT_TIME:
+		return si1133_set_integration_time(data, 0, val, val2);
+	case IIO_CHAN_INFO_HARDWAREGAIN:
+		switch (chan->type) {
+		case IIO_INTENSITY:
+		case IIO_UVINDEX:
+			if (val != 0 || val != 1)
+				return -EINVAL;
+
+			return si1133_update_adcsens(data,
+						     SI1133_ADCSENS_HSIG_MASK,
+						     SI1133_ADCSENS_HSIG_SHIFT,
+						     val);
+		default:
+			return -EINVAL;
+		}
+	default:
+		return -EINVAL;
+	}
+}
+
+static struct attribute *si1133_attributes[] = {
+	&iio_const_attr_integration_time_available.dev_attr.attr,
+	&iio_const_attr_scale_available.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group si1133_attribute_group = {
+	.attrs = si1133_attributes,
+};
+
+static const struct iio_info si1133_info = {
+	.read_raw = si1133_read_raw,
+	.write_raw = si1133_write_raw,
+	.attrs = &si1133_attribute_group,
+};
+
+/*
+ * si1133_init_lux_channels - Configure 3 different channels(adc) (1,2 and 3)
+ * The channel configuration for the lux measurement was taken from :
+ * https://siliconlabs.github.io/Gecko_SDK_Doc/efm32zg/html/si1133_8c_source.html#l00578
+ *
+ * Reserved the channel 0 for the other raw measurements
+ */
+static int si1133_init_lux_channels(struct si1133_data *data)
+{
+	int err;
+
+	err = si1133_chan_set_adcconfig(data, 1,
+					SI1133_ADCCONFIG_DECIM_RATE(1) |
+					SI1133_PARAM_ADCMUX_LARGE_WHITE);
+	if (err)
+		return err;
+
+	err = si1133_param_set(data, SI1133_PARAM_REG_ADCPOST(1),
+			       SI1133_ADCPOST_24BIT_EN |
+			       SI1133_ADCPOST_POSTSHIFT_BITQTY(0));
+	if (err)
+		return err;
+	err = si1133_chan_set_adcsens(data, 1, SI1133_ADCSENS_HSIG_MASK |
+				      SI1133_ADCSENS_NB_MEAS(64) | _48_8_us);
+	if (err)
+		return err;
+
+	err = si1133_chan_set_adcconfig(data, 2,
+					SI1133_ADCCONFIG_DECIM_RATE(1) |
+					SI1133_PARAM_ADCMUX_LARGE_WHITE);
+	if (err)
+		return err;
+
+	err = si1133_param_set(data, SI1133_PARAM_REG_ADCPOST(2),
+			       SI1133_ADCPOST_24BIT_EN |
+			       SI1133_ADCPOST_POSTSHIFT_BITQTY(2));
+	if (err)
+		return err;
+
+	err = si1133_chan_set_adcsens(data, 2, SI1133_ADCSENS_HSIG_MASK |
+				      SI1133_ADCSENS_NB_MEAS(1) | _3_120_0_us);
+	if (err)
+		return err;
+
+	err = si1133_chan_set_adcconfig(data, 3,
+					SI1133_ADCCONFIG_DECIM_RATE(1) |
+					SI1133_PARAM_ADCMUX_MED_IR);
+	if (err)
+		return err;
+
+	err = si1133_param_set(data, SI1133_PARAM_REG_ADCPOST(3),
+			       SI1133_ADCPOST_24BIT_EN |
+			       SI1133_ADCPOST_POSTSHIFT_BITQTY(2));
+	if (err)
+		return err;
+
+	return  si1133_chan_set_adcsens(data, 3, SI1133_ADCSENS_HSIG_MASK |
+					SI1133_ADCSENS_NB_MEAS(64) | _48_8_us);
+}
+
+static int si1133_initialize(struct si1133_data *data)
+{
+	int err;
+
+	err = si1133_cmd_reset_sw(data);
+	if (err)
+		return err;
+
+	/* Turn off autonomous mode */
+	err = si1133_param_set(data, SI1133_REG_MEAS_RATE, 0);
+	if (err)
+		return err;
+
+	err = si1133_init_lux_channels(data);
+	if (err)
+		return err;
+
+	return regmap_write(data->regmap, SI1133_REG_IRQ_ENABLE,
+			    SI1133_IRQ_CHANNEL_ENABLE);
+}
+
+static int si1133_validate_ids(struct iio_dev *iio_dev)
+{
+	struct si1133_data *data = iio_priv(iio_dev);
+
+	unsigned int part_id, rev_id, mfr_id;
+	int err;
+
+	err = regmap_read(data->regmap, SI1133_REG_PART_ID, &part_id);
+	if (err)
+		return err;
+
+	err = regmap_read(data->regmap, SI1133_REG_REV_ID, &rev_id);
+	if (err)
+		return err;
+
+	err = regmap_read(data->regmap, SI1133_REG_MFR_ID, &mfr_id);
+	if (err)
+		return err;
+
+	dev_info(&iio_dev->dev,
+		 "Device ID part %#02hhx rev %#02hhx mfr %#02hhx\n",
+		 part_id, rev_id, mfr_id);
+	if (part_id != SI1133_PART_ID) {
+		dev_err(&iio_dev->dev,
+			"Part ID mismatch got %#02hhx, expected %#02x\n",
+			part_id, SI1133_PART_ID);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static int si1133_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct si1133_data *data;
+	struct iio_dev *iio_dev;
+	int err;
+
+	iio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+	if (!iio_dev)
+		return -ENOMEM;
+
+	data = iio_priv(iio_dev);
+
+	init_completion(&data->completion);
+
+	data->regmap = devm_regmap_init_i2c(client, &si1133_regmap_config);
+	if (IS_ERR(data->regmap)) {
+		err = PTR_ERR(data->regmap);
+		dev_err(&client->dev, "Failed to initialise regmap: %d\n", err);
+		return err;
+	}
+
+	i2c_set_clientdata(client, iio_dev);
+	data->client = client;
+
+	iio_dev->dev.parent = &client->dev;
+	iio_dev->name = id->name;
+	iio_dev->channels = si1133_channels;
+	iio_dev->num_channels = ARRAY_SIZE(si1133_channels);
+	iio_dev->info = &si1133_info;
+	iio_dev->modes = INDIO_DIRECT_MODE;
+
+	mutex_init(&data->mutex);
+
+	err = si1133_validate_ids(iio_dev);
+	if (err)
+		return err;
+
+	err = si1133_initialize(data);
+	if (err) {
+		dev_err(&client->dev,
+			"Error when initializing chip: %d\n", err);
+		return err;
+	}
+
+	if (!client->irq) {
+		dev_err(&client->dev,
+			"Required interrupt not provided, cannot proceed\n");
+		return -EINVAL;
+	}
+
+	err = devm_request_threaded_irq(&client->dev, client->irq,
+					NULL,
+					si1133_threaded_irq_handler,
+					IRQF_ONESHOT | IRQF_SHARED,
+					client->name, iio_dev);
+	if (err) {
+		dev_warn(&client->dev, "Request irq %d failed: %i\n",
+			 client->irq, err);
+		return err;
+	}
+
+	return devm_iio_device_register(&client->dev, iio_dev);
+}
+
+static const struct i2c_device_id si1133_ids[] = {
+	{ "si1133", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, si1133_ids);
+
+static struct i2c_driver si1133_driver = {
+	.driver = {
+	    .name   = "si1133",
+	},
+	.probe  = si1133_probe,
+	.id_table = si1133_ids,
+};
+
+module_i2c_driver(si1133_driver);
+
+MODULE_AUTHOR("Maxime Roussin-Belanger <maxime.roussinbelanger@gmail.com>");
+MODULE_DESCRIPTION("Silabs SI1133, UV index sensor and ambient light sensor driver");
+MODULE_LICENSE("GPL");