summaryrefslogtreecommitdiffstats
path: root/drivers/ieee1394/sbp2.c
diff options
context:
space:
mode:
authorStefan Richter <stefanr@s5r6.in-berlin.de>2008-08-14 09:28:14 +0200
committerStefan Richter <stefanr@s5r6.in-berlin.de>2008-10-15 22:21:07 +0200
commited6ffd08084c68e9c3911e27706dec9d4c9a4175 (patch)
treee13379a355b162636c8e06a82b71c2d145de5708 /drivers/ieee1394/sbp2.c
parentcd8c79f17a878b01f3e83a8efd89da18ccdc7ef3 (diff)
downloadtalos-op-linux-ed6ffd08084c68e9c3911e27706dec9d4c9a4175.tar.gz
talos-op-linux-ed6ffd08084c68e9c3911e27706dec9d4c9a4175.zip
ieee1394: sbp2: enforce s/g segment size limit
1. We don't need to round the SBP-2 segment size limit down to a multiple of 4 kB (0xffff -> 0xf000). It is only necessary to ensure quadlet alignment (0xffff -> 0xfffc). 2. Use dma_set_max_seg_size() to tell the DMA mapping infrastructure and the block IO layer about the restriction. This way we can remove the size checks and segment splitting in the queuecommand path. This assumes that no other code in the ieee1394 stack uses dma_map_sg() with conflicting requirements. It furthermore assumes that the controller device's platform actually allows us to set the segment size to our liking. Assert the latter with a BUG_ON(). 3. Also use blk_queue_max_segment_size() to tell the block IO layer about it. It cannot know it because our scsi_add_host() does not point to the FireWire controller's device. We can also uniformly use dma_map_sg() for the single segment case just like for the multi segment case, to further simplify the code. Also clean up how the page table is converted to big endian. Thanks to Grant Grundler and FUJITA Tomonori for advice. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Diffstat (limited to 'drivers/ieee1394/sbp2.c')
-rw-r--r--drivers/ieee1394/sbp2.c98
1 files changed, 28 insertions, 70 deletions
diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c
index 0037305f599e..c52f6e6e8af2 100644
--- a/drivers/ieee1394/sbp2.c
+++ b/drivers/ieee1394/sbp2.c
@@ -656,24 +656,11 @@ static struct sbp2_command_info *sbp2util_allocate_command_orb(
static void sbp2util_mark_command_completed(struct sbp2_lu *lu,
struct sbp2_command_info *cmd)
{
- struct hpsb_host *host = lu->ud->ne->host;
-
- if (cmd->cmd_dma) {
- if (cmd->dma_type == CMD_DMA_SINGLE)
- dma_unmap_single(host->device.parent, cmd->cmd_dma,
- cmd->dma_size, cmd->dma_dir);
- else if (cmd->dma_type == CMD_DMA_PAGE)
- dma_unmap_page(host->device.parent, cmd->cmd_dma,
- cmd->dma_size, cmd->dma_dir);
- /* XXX: Check for CMD_DMA_NONE bug */
- cmd->dma_type = CMD_DMA_NONE;
- cmd->cmd_dma = 0;
- }
- if (cmd->sge_buffer) {
- dma_unmap_sg(host->device.parent, cmd->sge_buffer,
- cmd->dma_size, cmd->dma_dir);
- cmd->sge_buffer = NULL;
- }
+ if (scsi_sg_count(cmd->Current_SCpnt))
+ dma_unmap_sg(lu->ud->ne->host->device.parent,
+ scsi_sglist(cmd->Current_SCpnt),
+ scsi_sg_count(cmd->Current_SCpnt),
+ cmd->Current_SCpnt->sc_data_direction);
list_move_tail(&cmd->list, &lu->cmd_orb_completed);
}
@@ -838,6 +825,10 @@ static struct sbp2_lu *sbp2_alloc_device(struct unit_directory *ud)
#endif
}
+ if (dma_get_max_seg_size(hi->host->device.parent) > SBP2_MAX_SEG_SIZE)
+ BUG_ON(dma_set_max_seg_size(hi->host->device.parent,
+ SBP2_MAX_SEG_SIZE));
+
/* Prevent unloading of the 1394 host */
if (!try_module_get(hi->host->driver->owner)) {
SBP2_ERR("failed to get a reference on 1394 host driver");
@@ -1512,76 +1503,41 @@ static int sbp2_agent_reset(struct sbp2_lu *lu, int wait)
static int sbp2_prep_command_orb_sg(struct sbp2_command_orb *orb,
struct sbp2_fwhost_info *hi,
struct sbp2_command_info *cmd,
- unsigned int scsi_use_sg,
+ unsigned int sg_count,
struct scatterlist *sg,
u32 orb_direction,
enum dma_data_direction dma_dir)
{
struct device *dmadev = hi->host->device.parent;
+ struct sbp2_unrestricted_page_table *pt;
+ int i, n;
+
+ n = dma_map_sg(dmadev, sg, sg_count, dma_dir);
+ if (n == 0)
+ return -ENOMEM;
- cmd->dma_dir = dma_dir;
orb->data_descriptor_hi = ORB_SET_NODE_ID(hi->host->node_id);
orb->misc |= ORB_SET_DIRECTION(orb_direction);
/* special case if only one element (and less than 64KB in size) */
- if (scsi_use_sg == 1 && sg->length <= SBP2_MAX_SG_ELEMENT_LENGTH) {
-
- cmd->dma_size = sg->length;
- cmd->dma_type = CMD_DMA_PAGE;
- cmd->cmd_dma = dma_map_page(dmadev, sg_page(sg), sg->offset,
- cmd->dma_size, cmd->dma_dir);
- if (dma_mapping_error(dmadev, cmd->cmd_dma)) {
- cmd->cmd_dma = 0;
- return -ENOMEM;
- }
-
- orb->data_descriptor_lo = cmd->cmd_dma;
- orb->misc |= ORB_SET_DATA_SIZE(cmd->dma_size);
-
+ if (n == 1) {
+ orb->misc |= ORB_SET_DATA_SIZE(sg_dma_len(sg));
+ orb->data_descriptor_lo = sg_dma_address(sg);
} else {
- struct sbp2_unrestricted_page_table *sg_element =
- &cmd->scatter_gather_element[0];
- u32 sg_count, sg_len;
- dma_addr_t sg_addr;
- int i, count = dma_map_sg(dmadev, sg, scsi_use_sg, dma_dir);
-
- cmd->dma_size = scsi_use_sg;
- cmd->sge_buffer = sg;
-
- /* use page tables (s/g) */
- orb->misc |= ORB_SET_PAGE_TABLE_PRESENT(0x1);
- orb->data_descriptor_lo = cmd->sge_dma;
+ pt = &cmd->scatter_gather_element[0];
dma_sync_single_for_cpu(dmadev, cmd->sge_dma,
sizeof(cmd->scatter_gather_element),
DMA_TO_DEVICE);
- /* loop through and fill out our SBP-2 page tables
- * (and split up anything too large) */
- for (i = 0, sg_count = 0; i < count; i++, sg = sg_next(sg)) {
- sg_len = sg_dma_len(sg);
- sg_addr = sg_dma_address(sg);
- while (sg_len) {
- sg_element[sg_count].segment_base_lo = sg_addr;
- if (sg_len > SBP2_MAX_SG_ELEMENT_LENGTH) {
- sg_element[sg_count].length_segment_base_hi =
- PAGE_TABLE_SET_SEGMENT_LENGTH(SBP2_MAX_SG_ELEMENT_LENGTH);
- sg_addr += SBP2_MAX_SG_ELEMENT_LENGTH;
- sg_len -= SBP2_MAX_SG_ELEMENT_LENGTH;
- } else {
- sg_element[sg_count].length_segment_base_hi =
- PAGE_TABLE_SET_SEGMENT_LENGTH(sg_len);
- sg_len = 0;
- }
- sg_count++;
- }
+ for_each_sg(sg, sg, n, i) {
+ pt[i].high = cpu_to_be32(sg_dma_len(sg) << 16);
+ pt[i].low = cpu_to_be32(sg_dma_address(sg));
}
- orb->misc |= ORB_SET_DATA_SIZE(sg_count);
-
- sbp2util_cpu_to_be32_buffer(sg_element,
- (sizeof(struct sbp2_unrestricted_page_table)) *
- sg_count);
+ orb->misc |= ORB_SET_PAGE_TABLE_PRESENT(0x1) |
+ ORB_SET_DATA_SIZE(n);
+ orb->data_descriptor_lo = cmd->sge_dma;
dma_sync_single_for_device(dmadev, cmd->sge_dma,
sizeof(cmd->scatter_gather_element),
@@ -2048,6 +2004,8 @@ static int sbp2scsi_slave_configure(struct scsi_device *sdev)
sdev->start_stop_pwr_cond = 1;
if (lu->workarounds & SBP2_WORKAROUND_128K_MAX_TRANS)
blk_queue_max_sectors(sdev->request_queue, 128 * 1024 / 512);
+
+ blk_queue_max_segment_size(sdev->request_queue, SBP2_MAX_SEG_SIZE);
return 0;
}
OpenPOWER on IntegriCloud