Merge branch 'master' into next

1 files changed, 74 insertions, 27 deletions

diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c
index 9564fb069957..b30e5796cb26 100644
--- a/drivers/hwmon/w83627hf.c
+++ b/drivers/hwmon/w83627hf.c
@@ -67,10 +67,6 @@ module_param(force_i2c, byte, 0);
 MODULE_PARM_DESC(force_i2c,
 		 "Initialize the i2c address of the sensors");
 
-static int reset;
-module_param(reset, bool, 0);
-MODULE_PARM_DESC(reset, "Set to one to reset chip on load");
-
 static int init = 1;
 module_param(init, bool, 0);
 MODULE_PARM_DESC(init, "Set to zero to bypass chip initialization");
@@ -209,6 +205,13 @@ static const u16 w83627hf_reg_temp_over[]	= { 0x39, 0x155, 0x255 };
 #define W83627HF_REG_PWM1 0x5A
 #define W83627HF_REG_PWM2 0x5B
 
+static const u8 W83627THF_REG_PWM_ENABLE[] = {
+	0x04,		/* FAN 1 mode */
+	0x04,		/* FAN 2 mode */
+	0x12,		/* FAN AUX mode */
+};
+static const u8 W83627THF_PWM_ENABLE_SHIFT[] = { 2, 4, 1 };
+
 #define W83627THF_REG_PWM1		0x01	/* 697HF/637HF/687THF too */
 #define W83627THF_REG_PWM2		0x03	/* 697HF/637HF/687THF too */
 #define W83627THF_REG_PWM3		0x11	/* 637HF/687THF too */
@@ -366,6 +369,9 @@ struct w83627hf_data {
 	u32 alarms;		/* Register encoding, combined */
 	u32 beep_mask;		/* Register encoding, combined */
 	u8 pwm[3];		/* Register value */
+	u8 pwm_enable[3];	/* 1 = manual
+				   2 = thermal cruise (also called SmartFan I)
+				   3 = fan speed cruise */
 	u8 pwm_freq[3];		/* Register value */
 	u16 sens[3];		/* 1 = pentium diode; 2 = 3904 diode;
 				   4 = thermistor */
@@ -957,6 +963,42 @@ static SENSOR_DEVICE_ATTR(pwm2, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 1);
 static SENSOR_DEVICE_ATTR(pwm3, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 2);
 
 static ssize_t
+show_pwm_enable(struct device *dev, struct device_attribute *devattr, char *buf)
+{
+	int nr = to_sensor_dev_attr(devattr)->index;
+	struct w83627hf_data *data = w83627hf_update_device(dev);
+	return sprintf(buf, "%d\n", data->pwm_enable[nr]);
+}
+
+static ssize_t
+store_pwm_enable(struct device *dev, struct device_attribute *devattr,
+	  const char *buf, size_t count)
+{
+	int nr = to_sensor_dev_attr(devattr)->index;
+	struct w83627hf_data *data = dev_get_drvdata(dev);
+	unsigned long val = simple_strtoul(buf, NULL, 10);
+	u8 reg;
+
+	if (!val || (val > 3))	/* modes 1, 2 and 3 are supported */
+		return -EINVAL;
+	mutex_lock(&data->update_lock);
+	data->pwm_enable[nr] = val;
+	reg = w83627hf_read_value(data, W83627THF_REG_PWM_ENABLE[nr]);
+	reg &= ~(0x03 << W83627THF_PWM_ENABLE_SHIFT[nr]);
+	reg |= (val - 1) << W83627THF_PWM_ENABLE_SHIFT[nr];
+	w83627hf_write_value(data, W83627THF_REG_PWM_ENABLE[nr], reg);
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+static SENSOR_DEVICE_ATTR(pwm1_enable, S_IRUGO|S_IWUSR, show_pwm_enable,
+						  store_pwm_enable, 0);
+static SENSOR_DEVICE_ATTR(pwm2_enable, S_IRUGO|S_IWUSR, show_pwm_enable,
+						  store_pwm_enable, 1);
+static SENSOR_DEVICE_ATTR(pwm3_enable, S_IRUGO|S_IWUSR, show_pwm_enable,
+						  store_pwm_enable, 2);
+
+static ssize_t
 show_pwm_freq(struct device *dev, struct device_attribute *devattr, char *buf)
 {
 	int nr = to_sensor_dev_attr(devattr)->index;
@@ -1223,6 +1265,11 @@ static struct attribute *w83627hf_attributes_opt[] = {
 	&sensor_dev_attr_pwm1_freq.dev_attr.attr,
 	&sensor_dev_attr_pwm2_freq.dev_attr.attr,
 	&sensor_dev_attr_pwm3_freq.dev_attr.attr,
+
+	&sensor_dev_attr_pwm1_enable.dev_attr.attr,
+	&sensor_dev_attr_pwm2_enable.dev_attr.attr,
+	&sensor_dev_attr_pwm3_enable.dev_attr.attr,
+
 	NULL
 };
 
@@ -1366,6 +1413,19 @@ static int __devinit w83627hf_probe(struct platform_device *pdev)
 				&sensor_dev_attr_pwm3_freq.dev_attr)))
 			goto ERROR4;
 
+	if (data->type != w83627hf)
+		if ((err = device_create_file(dev,
+				&sensor_dev_attr_pwm1_enable.dev_attr))
+		 || (err = device_create_file(dev,
+				&sensor_dev_attr_pwm2_enable.dev_attr)))
+			goto ERROR4;
+
+	if (data->type == w83627thf || data->type == w83637hf
+	 || data->type == w83687thf)
+		if ((err = device_create_file(dev,
+				&sensor_dev_attr_pwm3_enable.dev_attr)))
+			goto ERROR4;
+
 	data->hwmon_dev = hwmon_device_register(dev);
 	if (IS_ERR(data->hwmon_dev)) {
 		err = PTR_ERR(data->hwmon_dev);
@@ -1536,29 +1596,6 @@ static void __devinit w83627hf_init_device(struct platform_device *pdev)
 	enum chips type = data->type;
 	u8 tmp;
 
-	if (reset) {
-		/* Resetting the chip has been the default for a long time,
-		   but repeatedly caused problems (fans going to full
-		   speed...) so it is now optional. It might even go away if
-		   nobody reports it as being useful, as I see very little
-		   reason why this would be needed at all. */
-		dev_info(&pdev->dev, "If reset=1 solved a problem you were "
-			 "having, please report!\n");
-
-		/* save this register */
-		i = w83627hf_read_value(data, W83781D_REG_BEEP_CONFIG);
-		/* Reset all except Watchdog values and last conversion values
-		   This sets fan-divs to 2, among others */
-		w83627hf_write_value(data, W83781D_REG_CONFIG, 0x80);
-		/* Restore the register and disable power-on abnormal beep.
-		   This saves FAN 1/2/3 input/output values set by BIOS. */
-		w83627hf_write_value(data, W83781D_REG_BEEP_CONFIG, i | 0x80);
-		/* Disable master beep-enable (reset turns it on).
-		   Individual beeps should be reset to off but for some reason
-		   disabling this bit helps some people not get beeped */
-		w83627hf_write_value(data, W83781D_REG_BEEP_INTS2, 0);
-	}
-
 	/* Minimize conflicts with other winbond i2c-only clients...  */
 	/* disable i2c subclients... how to disable main i2c client?? */
 	/* force i2c address to relatively uncommon address */
@@ -1655,6 +1692,7 @@ static struct w83627hf_data *w83627hf_update_device(struct device *dev)
 {
 	struct w83627hf_data *data = dev_get_drvdata(dev);
 	int i, num_temps = (data->type == w83697hf) ? 2 : 3;
+	int num_pwms = (data->type == w83697hf) ? 2 : 3;
 
 	mutex_lock(&data->update_lock);
 
@@ -1707,6 +1745,15 @@ static struct w83627hf_data *w83627hf_update_device(struct device *dev)
 					break;
 			}
 		}
+		if (data->type != w83627hf) {
+			for (i = 0; i < num_pwms; i++) {
+				u8 tmp = w83627hf_read_value(data,
+					W83627THF_REG_PWM_ENABLE[i]);
+				data->pwm_enable[i] =
+					((tmp >> W83627THF_PWM_ENABLE_SHIFT[i])
+					& 0x03) + 1;
+			}
+		}
 		for (i = 0; i < num_temps; i++) {
 			data->temp[i] = w83627hf_read_value(
 						data, w83627hf_reg_temp[i]);