Merge tag 'drm-for-v4.13' of git://people.freedesktop.org/~airlied/linux

Pull drm updates from Dave Airlie:
 "This is the main pull request for the drm, I think I've got one later
  driver pull for mediatek SoC driver, I'm undecided on if it needs to
  go to you yet.

  Otherwise summary below:

  Core drm:
   - Atomic add driver private objects
   - Deprecate preclose hook in modern drivers
   - MST bandwidth tracking
   - Use kvmalloc in more places
   - Add mode_valid hook for crtc/encoder/bridge
   - Reduce sync_file construction time
   - Documentation updates
   - New DRM synchronisation object support

  New drivers:
   - pl111 - pl111 CLCD display controller

  Panel:
   - Innolux P079ZCA panel driver
   - Add NL12880B20-05, NL192108AC18-02D, P320HVN03 panels
   - panel-samsung-s6e3ha2: Add s6e3hf2 panel support

  i915:
   - SKL+ watermark fixes
   - G4x/G33 reset improvements
   - DP AUX backlight improvements
   - Buffer based GuC/host communication
   - New getparam for (sub)slice infomation
   - Cannonlake and Coffeelake initial patches
   - Execbuf optimisations

  radeon/amdgpu:
   - Lots of Vega10 bug fixes
   - Preliminary raven support
   - KIQ support for compute rings
   - MEC queue management rework
   - DCE6 Audio support
   - SR-IOV improvements
   - Better radeon/amdgpu selection support

  nouveau:
   - HDMI stereoscopic support
   - Display code rework for >= GM20x GPUs

  msm:
   - GEM rework for fine-grained locking
   - Per-process pagetable work
   - HDMI fixes for Snapdragon 820.

  vc4:
   - Remove 256MB CMA limit from vc4
   - Add out-fence support
   - Add support for cygnus
   - Get/set tiling ioctls support
   - Add T-format tiling support for scanout

  zte:
   - add VGA support.

  etnaviv:
   - Thermal throttle support for newer GPUs
   - Restore userspace buffer cache performance
   - dma-buf sync fix

  stm:
   - add stm32f429 display support

  exynos:
   - Rework vblank handling
   - Fixup sw-trigger code

  sun4i:
   - V3s display engine support
   - HDMI support for older SoCs
   - Preliminary work on dual-pipeline SoCs.

  rcar-du:
   - VSP work

  imx-drm:
   - Remove counter load enable from PRE
   - Double read/write reduction flag support

  tegra:
   - Documentation for the host1x and drm driver.
   - Lots of staging ioctl fixes due to grate project work.

  omapdrm:
   - dma-buf fence support
   - TILER rotation fixes"

* tag 'drm-for-v4.13' of git://people.freedesktop.org/~airlied/linux: (1270 commits)
  drm: Remove unused drm_file parameter to drm_syncobj_replace_fence()
  drm/amd/powerplay: fix bug fail to remove sysfs when rmmod amdgpu.
  amdgpu: Set cik/si_support to 1 by default if radeon isn't built
  drm/amdgpu/gfx9: fix driver reload with KIQ
  drm/amdgpu/gfx8: fix driver reload with KIQ
  drm/amdgpu: Don't call amd_powerplay_destroy() if we don't have powerplay
  drm/ttm: Fix use-after-free in ttm_bo_clean_mm
  drm/amd/amdgpu: move get memory type function from early init to sw init
  drm/amdgpu/cgs: always set reference clock in mode_info
  drm/amdgpu: fix vblank_time when displays are off
  drm/amd/powerplay: power value format change for Vega10
  drm/amdgpu/gfx9: support the amdgpu.disable_cu option
  drm/amd/powerplay: change PPSMC_MSG_GetCurrPkgPwr for Vega10
  drm/amdgpu: Make amdgpu_cs_parser_init static (v2)
  drm/amdgpu/cs: fix a typo in a comment
  drm/amdgpu: Fix the exported always on CU bitmap
  drm/amdgpu/gfx9: gfx_v9_0_enable_gfx_static_mg_power_gating() can be static
  drm/amdgpu/psp: upper_32_bits/lower_32_bits for address setup
  drm/amd/powerplay/cz: print message if smc message fails
  drm/amdgpu: fix typo in amdgpu_debugfs_test_ib_init
  ...

1 files changed, 22 insertions, 32 deletions

diff --git a/drivers/gpu/drm/vc4/vc4_crtc.c b/drivers/gpu/drm/vc4/vc4_crtc.c
index d86c8cce3182..403bbd5f99a9 100644
--- a/drivers/gpu/drm/vc4/vc4_crtc.c
+++ b/drivers/gpu/drm/vc4/vc4_crtc.c
@@ -32,13 +32,13 @@
  * ones that set the clock.
  */
 
-#include "drm_atomic.h"
-#include "drm_atomic_helper.h"
-#include "drm_crtc_helper.h"
-#include "linux/clk.h"
-#include "drm_fb_cma_helper.h"
-#include "linux/component.h"
-#include "linux/of_device.h"
+#include <drm/drm_atomic.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_crtc_helper.h>
+#include <linux/clk.h>
+#include <drm/drm_fb_cma_helper.h>
+#include <linux/component.h>
+#include <linux/of_device.h>
 #include "vc4_drv.h"
 #include "vc4_regs.h"
 
@@ -151,10 +151,10 @@ int vc4_crtc_debugfs_regs(struct seq_file *m, void *unused)
 }
 #endif
 
-int vc4_crtc_get_scanoutpos(struct drm_device *dev, unsigned int crtc_id,
-			    unsigned int flags, int *vpos, int *hpos,
-			    ktime_t *stime, ktime_t *etime,
-			    const struct drm_display_mode *mode)
+bool vc4_crtc_get_scanoutpos(struct drm_device *dev, unsigned int crtc_id,
+			     bool in_vblank_irq, int *vpos, int *hpos,
+			     ktime_t *stime, ktime_t *etime,
+			     const struct drm_display_mode *mode)
 {
 	struct vc4_dev *vc4 = to_vc4_dev(dev);
 	struct drm_crtc *crtc = drm_crtc_from_index(dev, crtc_id);
@@ -162,7 +162,7 @@ int vc4_crtc_get_scanoutpos(struct drm_device *dev, unsigned int crtc_id,
 	u32 val;
 	int fifo_lines;
 	int vblank_lines;
-	int ret = 0;
+	bool ret = false;
 
 	/* preempt_disable_rt() should go right here in PREEMPT_RT patchset. */
 
@@ -198,7 +198,7 @@ int vc4_crtc_get_scanoutpos(struct drm_device *dev, unsigned int crtc_id,
 	fifo_lines = vc4_crtc->cob_size / mode->crtc_hdisplay;
 
 	if (fifo_lines > 0)
-		ret |= DRM_SCANOUTPOS_VALID;
+		ret = true;
 
 	/* HVS more than fifo_lines into frame for compositing? */
 	if (*vpos > fifo_lines) {
@@ -216,7 +216,6 @@ int vc4_crtc_get_scanoutpos(struct drm_device *dev, unsigned int crtc_id,
 		 */
 		*vpos -= fifo_lines + 1;
 
-		ret |= DRM_SCANOUTPOS_ACCURATE;
 		return ret;
 	}
 
@@ -229,10 +228,9 @@ int vc4_crtc_get_scanoutpos(struct drm_device *dev, unsigned int crtc_id,
 	 * We can't get meaningful readings wrt. scanline position of the PV
 	 * and need to make things up in a approximative but consistent way.
 	 */
-	ret |= DRM_SCANOUTPOS_IN_VBLANK;
 	vblank_lines = mode->vtotal - mode->vdisplay;
 
-	if (flags & DRM_CALLED_FROM_VBLIRQ) {
+	if (in_vblank_irq) {
 		/*
 		 * Assume the irq handler got called close to first
 		 * line of vblank, so PV has about a full vblank
@@ -254,9 +252,10 @@ int vc4_crtc_get_scanoutpos(struct drm_device *dev, unsigned int crtc_id,
 		 * we are at the very beginning of vblank, as the hvs just
 		 * started refilling, and the stime and etime timestamps
 		 * truly correspond to start of vblank.
+		 *
+		 * Unfortunately there's no way to report this to upper levels
+		 * and make it more useful.
 		 */
-		if ((val & SCALER_DISPSTATX_FULL) != SCALER_DISPSTATX_FULL)
-			ret |= DRM_SCANOUTPOS_ACCURATE;
 	} else {
 		/*
 		 * No clue where we are inside vblank. Return a vpos of zero,
@@ -270,19 +269,6 @@ int vc4_crtc_get_scanoutpos(struct drm_device *dev, unsigned int crtc_id,
 	return ret;
 }
 
-int vc4_crtc_get_vblank_timestamp(struct drm_device *dev, unsigned int crtc_id,
-				  int *max_error, struct timeval *vblank_time,
-				  unsigned flags)
-{
-	struct drm_crtc *crtc = drm_crtc_from_index(dev, crtc_id);
-	struct drm_crtc_state *state = crtc->state;
-
-	/* Helper routine in DRM core does all the work: */
-	return drm_calc_vbltimestamp_from_scanoutpos(dev, crtc_id, max_error,
-						     vblank_time, flags,
-						     &state->adjusted_mode);
-}
-
 static void vc4_crtc_destroy(struct drm_crtc *crtc)
 {
 	drm_crtc_cleanup(crtc);
@@ -359,12 +345,16 @@ static u32 vc4_get_fifo_full_level(u32 format)
 static struct drm_encoder *vc4_get_crtc_encoder(struct drm_crtc *crtc)
 {
 	struct drm_connector *connector;
+	struct drm_connector_list_iter conn_iter;
 
-	drm_for_each_connector(connector, crtc->dev) {
+	drm_connector_list_iter_begin(crtc->dev, &conn_iter);
+	drm_for_each_connector_iter(connector, &conn_iter) {
 		if (connector->state->crtc == crtc) {
+			drm_connector_list_iter_end(&conn_iter);
 			return connector->encoder;
 		}
 	}
+	drm_connector_list_iter_end(&conn_iter);
 
 	return NULL;
 }