Merge tag 'drm-next-2018-10-24' of git://anongit.freedesktop.org/drm/drm

Pull drm updates from Dave Airlie:
 "This is going to rebuild more than drm as it adds a new helper to
  list.h for doing bulk updates. Seemed like a reasonable addition to
  me.

  Otherwise the usual merge window stuff lots of i915 and amdgpu, not so
  much nouveau, and piles of everything else.

  Core:
   - Adds a new list.h helper for doing bulk list updates for TTM.
   - Don't leak fb address in smem_start to userspace (comes with EXPORT
     workaround for people using mali out of tree hacks)
   - udmabuf device to turn memfd regions into dma-buf
   - Per-plane blend mode property
   - ref/unref replacements with get/put
   - fbdev conflicting framebuffers code cleaned up
   - host-endian format variants
   - panel orientation quirk for Acer One 10

  bridge:
   - TI SN65DSI86 chip support

  vkms:
   - GEM support.
   - Cursor support

  amdgpu:
   - Merge amdkfd and amdgpu into one module
   - CEC over DP AUX support
   - Picasso APU support + VCN dynamic powergating
   - Raven2 APU support
   - Vega20 enablement + kfd support
   - ACP powergating improvements
   - ABGR/XBGR display support
   - VCN jpeg support
   - xGMI support
   - DC i2c/aux cleanup
   - Ycbcr 4:2:0 support
   - GPUVM improvements
   - Powerplay and powerplay endian fixes
   - Display underflow fixes

  vmwgfx:
   - Move vmwgfx specific TTM code to vmwgfx
   - Split out vmwgfx buffer/resource validation code
   - Atomic operation rework

  bochs:
   - use more helpers
   - format/byteorder improvements

  qxl:
   - use more helpers

  i915:
   - GGTT coherency getparam
   - Turn off resource streamer API
   - More Icelake enablement + DMC firmware
   - Full PPGTT for Ivybridge, Haswell and Valleyview
   - DDB distribution based on resolution
   - Limited range DP display support

  nouveau:
   - CEC over DP AUX support
   - Initial HDMI 2.0 support

  virtio-gpu:
   - vmap support for PRIME objects

  tegra:
   - Initial Tegra194 support
   - DMA/IOMMU integration fixes

  msm:
   - a6xx perf improvements + clock prefix
   - GPU preemption optimisations
   - a6xx devfreq support
   - cursor support

  rockchip:
   - PX30 support
   - rgb output interface support

  mediatek:
   - HDMI output support on mt2701 and mt7623

  rcar-du:
   - Interlaced modes on Gen3
   - LVDS on R8A77980
   - D3 and E3 SoC support

  hisilicon:
   - misc fixes

  mxsfb:
   - runtime pm support

  sun4i:
   - R40 TCON support
   - Allwinner A64 support
   - R40 HDMI support

  omapdrm:
   - Driver rework changing display pipeline ordering to use common code
   - DMM memory barrier and irq fixes
   - Errata workarounds

  exynos:
   - out-bridge support for LVDS bridge driver
   - Samsung 16x16 tiled format support
   - Plane alpha and pixel blend mode support

  tilcdc:
   - suspend/resume update

  mali-dp:
   - misc updates"

* tag 'drm-next-2018-10-24' of git://anongit.freedesktop.org/drm/drm: (1382 commits)
  firmware/dmc/icl: Add missing MODULE_FIRMWARE() for Icelake.
  drm/i915/icl: Fix signal_levels
  drm/i915/icl: Fix DDI/TC port clk_off bits
  drm/i915/icl: create function to identify combophy port
  drm/i915/gen9+: Fix initial readout for Y tiled framebuffers
  drm/i915: Large page offsets for pread/pwrite
  drm/i915/selftests: Disable shrinker across mmap-exhaustion
  drm/i915/dp: Link train Fallback on eDP only if fallback link BW can fit panel's native mode
  drm/i915: Fix intel_dp_mst_best_encoder()
  drm/i915: Skip vcpi allocation for MSTB ports that are gone
  drm/i915: Don't unset intel_connector->mst_port
  drm/i915: Only reset seqno if actually idle
  drm/i915: Use the correct crtc when sanitizing plane mapping
  drm/i915: Restore vblank interrupts earlier
  drm/i915: Check fb stride against plane max stride
  drm/amdgpu/vcn:Fix uninitialized symbol error
  drm: panel-orientation-quirks: Add quirk for Acer One 10 (S1003)
  drm/amd/amdgpu: Fix debugfs error handling
  drm/amdgpu: Update gc_9_0 golden settings.
  drm/amd/powerplay: update PPtable with DC BTC and Tvr SocLimit fields
  ...

1 files changed, 24 insertions, 79 deletions

diff --git a/drivers/gpu/drm/omapdrm/displays/panel-lgphilips-lb035q02.c b/drivers/gpu/drm/omapdrm/displays/panel-lgphilips-lb035q02.c
index 754197099440..f6ef8ff964dd 100644
--- a/drivers/gpu/drm/omapdrm/displays/panel-lgphilips-lb035q02.c
+++ b/drivers/gpu/drm/omapdrm/displays/panel-lgphilips-lb035q02.c
@@ -33,19 +33,11 @@ static const struct videomode lb035q02_vm = {
 	.vfront_porch	= 4,
 	.vback_porch	= 18,
 
-	.flags		= DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
-			  DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_SYNC_NEGEDGE |
-			  DISPLAY_FLAGS_PIXDATA_POSEDGE,
-	/*
-	 * Note: According to the panel documentation:
-	 * DE is active LOW
-	 * DATA needs to be driven on the FALLING edge
-	 */
+	.flags		= DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW,
 };
 
 struct panel_drv_data {
 	struct omap_dss_device dssdev;
-	struct omap_dss_device *in;
 
 	struct spi_device *spi;
 
@@ -116,51 +108,25 @@ static void init_lb035q02_panel(struct spi_device *spi)
 	lb035q02_write_reg(spi, 0x3b, 0x0806);
 }
 
-static int lb035q02_connect(struct omap_dss_device *dssdev)
+static int lb035q02_connect(struct omap_dss_device *src,
+			    struct omap_dss_device *dst)
 {
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in;
-	int r;
-
-	if (omapdss_device_is_connected(dssdev))
-		return 0;
-
-	in = omapdss_of_find_source_for_first_ep(dssdev->dev->of_node);
-	if (IS_ERR(in)) {
-		dev_err(dssdev->dev, "failed to find video source\n");
-		return PTR_ERR(in);
-	}
-
-	r = in->ops.dpi->connect(in, dssdev);
-	if (r) {
-		omap_dss_put_device(in);
-		return r;
-	}
+	struct panel_drv_data *ddata = to_panel_data(dst);
 
 	init_lb035q02_panel(ddata->spi);
 
-	ddata->in = in;
 	return 0;
 }
 
-static void lb035q02_disconnect(struct omap_dss_device *dssdev)
+static void lb035q02_disconnect(struct omap_dss_device *src,
+				struct omap_dss_device *dst)
 {
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	if (!omapdss_device_is_connected(dssdev))
-		return;
-
-	in->ops.dpi->disconnect(in, dssdev);
-
-	omap_dss_put_device(in);
-	ddata->in = NULL;
 }
 
 static int lb035q02_enable(struct omap_dss_device *dssdev)
 {
 	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
+	struct omap_dss_device *src = dssdev->src;
 	int r;
 
 	if (!omapdss_device_is_connected(dssdev))
@@ -169,9 +135,7 @@ static int lb035q02_enable(struct omap_dss_device *dssdev)
 	if (omapdss_device_is_enabled(dssdev))
 		return 0;
 
-	in->ops.dpi->set_timings(in, &ddata->vm);
-
-	r = in->ops.dpi->enable(in);
+	r = src->ops->enable(src);
 	if (r)
 		return r;
 
@@ -186,7 +150,7 @@ static int lb035q02_enable(struct omap_dss_device *dssdev)
 static void lb035q02_disable(struct omap_dss_device *dssdev)
 {
 	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
+	struct omap_dss_device *src = dssdev->src;
 
 	if (!omapdss_device_is_enabled(dssdev))
 		return;
@@ -194,23 +158,11 @@ static void lb035q02_disable(struct omap_dss_device *dssdev)
 	if (ddata->enable_gpio)
 		gpiod_set_value_cansleep(ddata->enable_gpio, 0);
 
-	in->ops.dpi->disable(in);
+	src->ops->disable(src);
 
 	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
 }
 
-static void lb035q02_set_timings(struct omap_dss_device *dssdev,
-				 struct videomode *vm)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	ddata->vm = *vm;
-	dssdev->panel.vm = *vm;
-
-	in->ops.dpi->set_timings(in, vm);
-}
-
 static void lb035q02_get_timings(struct omap_dss_device *dssdev,
 				 struct videomode *vm)
 {
@@ -219,25 +171,14 @@ static void lb035q02_get_timings(struct omap_dss_device *dssdev,
 	*vm = ddata->vm;
 }
 
-static int lb035q02_check_timings(struct omap_dss_device *dssdev,
-				  struct videomode *vm)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	return in->ops.dpi->check_timings(in, vm);
-}
-
-static struct omap_dss_driver lb035q02_ops = {
+static const struct omap_dss_device_ops lb035q02_ops = {
 	.connect	= lb035q02_connect,
 	.disconnect	= lb035q02_disconnect,
 
 	.enable		= lb035q02_enable,
 	.disable	= lb035q02_disable,
 
-	.set_timings	= lb035q02_set_timings,
 	.get_timings	= lb035q02_get_timings,
-	.check_timings	= lb035q02_check_timings,
 };
 
 static int lb035q02_probe_of(struct spi_device *spi)
@@ -278,16 +219,21 @@ static int lb035q02_panel_spi_probe(struct spi_device *spi)
 
 	dssdev = &ddata->dssdev;
 	dssdev->dev = &spi->dev;
-	dssdev->driver = &lb035q02_ops;
+	dssdev->ops = &lb035q02_ops;
 	dssdev->type = OMAP_DISPLAY_TYPE_DPI;
 	dssdev->owner = THIS_MODULE;
-	dssdev->panel.vm = ddata->vm;
+	dssdev->of_ports = BIT(0);
 
-	r = omapdss_register_display(dssdev);
-	if (r) {
-		dev_err(&spi->dev, "Failed to register panel\n");
-		return r;
-	}
+	/*
+	 * Note: According to the panel documentation:
+	 * DE is active LOW
+	 * DATA needs to be driven on the FALLING edge
+	 */
+	dssdev->bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_SYNC_NEGEDGE
+			  | DRM_BUS_FLAG_PIXDATA_POSEDGE;
+
+	omapdss_display_init(dssdev);
+	omapdss_device_register(dssdev);
 
 	return 0;
 }
@@ -297,10 +243,9 @@ static int lb035q02_panel_spi_remove(struct spi_device *spi)
 	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
 	struct omap_dss_device *dssdev = &ddata->dssdev;
 
-	omapdss_unregister_display(dssdev);
+	omapdss_device_unregister(dssdev);
 
 	lb035q02_disable(dssdev);
-	lb035q02_disconnect(dssdev);
 
 	return 0;
 }