Merge tag 'drm-for-v4.17' of git://people.freedesktop.org/~airlied/linux

Pull drm updates from Dave Airlie:
 "Cannonlake and Vega12 support are probably the two major things. This
  pull lacks nouveau, Ben had some unforseen leave and a few other
  blockers so we'll see how things look or maybe leave it for this merge
  window.

  core:
   - Device links to handle sound/gpu pm dependency
   - Color encoding/range properties
   - Plane clipping into plane check helper
   - Backlight helpers
   - DP TP4 + HBR3 helper support

  amdgpu:
   - Vega12 support
   - Enable DC by default on all supported GPUs
   - Powerplay restructuring and cleanup
   - DC bandwidth calc updates
   - DC backlight on pre-DCE11
   - TTM backing store dropping support
   - SR-IOV fixes
   - Adding "wattman" like functionality
   - DC crc support
   - Improved DC dual-link handling

  amdkfd:
   - GPUVM support for dGPU
   - KFD events for dGPU
   - Enable PCIe atomics for dGPUs
   - HSA process eviction support
   - Live-lock fixes for process eviction
   - VM page table allocation fix for large-bar systems

  panel:
   - Raydium RM68200
   - AUO G104SN02 V2
   - KEO TX31D200VM0BAA
   - ARM Versatile panels

  i915:
   - Cannonlake support enabled
   - AUX-F port support added
   - Icelake base enabling until internal milestone of forcewake support
   - Query uAPI interface (used for GPU topology information currently)
   - Compressed framebuffer support for sprites
   - kmem cache shrinking when GPU is idle
   - Avoid boosting GPU when waited item is being processed already
   - Avoid retraining LSPCON link unnecessarily
   - Decrease request signaling latency
   - Deprecation of I915_SET_COLORKEY_NONE
   - Kerneldoc and compiler warning cleanup for upcoming CI enforcements
   - Full range ycbcr toggling
   - HDCP support

  i915/gvt:
   - Big refactor for shadow ppgtt
   - KBL context save/restore via LRI cmd (Weinan)
   - Properly unmap dma for guest page (Changbin)

  vmwgfx:
   - Lots of various improvements

  etnaviv:
   - Use the drm gpu scheduler
   - prep work for GC7000L support

  vc4:
   - fix alpha blending
   - Expose perf counters to userspace

  pl111:
   - Bandwidth checking/limiting
   - Versatile panel support

  sun4i:
   - A83T HDMI support
   - A80 support
   - YUV plane support
   - H3/H5 HDMI support

  omapdrm:
   - HPD support for DVI connector
   - remove lots of static variables

  msm:
   - DSI updates from 10nm / SDM845
   - fix for race condition with a3xx/a4xx fence completion irq
   - some refactoring/prep work for eventual a6xx support (ie. when we
     have a userspace)
   - a5xx debugfs enhancements
   - some mdp5 fixes/cleanups to prepare for eventually merging
     writeback
   - support (ie. when we have a userspace)

  tegra:
   - mmap() fixes for fbdev devices
   - Overlay plane for hw cursor fix
   - dma-buf cache maintenance support

  mali-dp:
   - YUV->RGB conversion support

  rockchip:
   - rk3399/chromebook fixes and improvements

  rcar-du:
   - LVDS support move to drm bridge
   - DT bindings for R8A77995
   - Driver/DT support for R8A77970

  tilcdc:
   - DRM panel support"

* tag 'drm-for-v4.17' of git://people.freedesktop.org/~airlied/linux: (1646 commits)
  drm/i915: Fix hibernation with ACPI S0 target state
  drm/i915/execlists: Use a locked clear_bit() for synchronisation with interrupt
  drm/i915: Specify which engines to reset following semaphore/event lockups
  drm/i915/dp: Write to SET_POWER dpcd to enable MST hub.
  drm/amdkfd: Use ordered workqueue to restore processes
  drm/amdgpu: Fix acquiring VM on large-BAR systems
  drm/amd/pp: clean header file hwmgr.h
  drm/amd/pp: use mlck_table.count for array loop index limit
  drm: Fix uabi regression by allowing garbage mode->type from userspace
  drm/amdgpu: Add an ATPX quirk for hybrid laptop
  drm/amdgpu: fix spelling mistake: "asssert" -> "assert"
  drm/amd/pp: Add new asic support in pp_psm.c
  drm/amd/pp: Clean up powerplay code on Vega12
  drm/amd/pp: Add smu irq handlers for legacy asics
  drm/amd/pp: Fix set wrong temperature range on smu7
  drm/amdgpu: Don't change preferred domian when fallback GTT v5
  drm/vmwgfx: Bump version patchlevel and date
  drm/vmwgfx: use monotonic event timestamps
  drm/vmwgfx: Unpin the screen object backup buffer when not used
  drm/vmwgfx: Stricter count of legacy surface device resources
  ...

1 files changed, 822 insertions, 0 deletions

diff --git a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c
new file mode 100644
index 000000000000..c4c37a7df637
--- /dev/null
+++ b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c
@@ -0,0 +1,822 @@
+/*
+ * SPDX-License-Identifier: GPL-2.0
+ * Copyright (c) 2018, The Linux Foundation
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/iopoll.h>
+
+#include "dsi_pll.h"
+#include "dsi.xml.h"
+
+/*
+ * DSI PLL 10nm - clock diagram (eg: DSI0):
+ *
+ *           dsi0_pll_out_div_clk  dsi0_pll_bit_clk
+ *                              |                |
+ *                              |                |
+ *                 +---------+  |  +----------+  |  +----+
+ *  dsi0vco_clk ---| out_div |--o--| divl_3_0 |--o--| /8 |-- dsi0pllbyte
+ *                 +---------+  |  +----------+  |  +----+
+ *                              |                |
+ *                              |                |         dsi0_pll_by_2_bit_clk
+ *                              |                |          |
+ *                              |                |  +----+  |  |\  dsi0_pclk_mux
+ *                              |                |--| /2 |--o--| \   |
+ *                              |                |  +----+     |  \  |  +---------+
+ *                              |                --------------|  |--o--| div_7_4 |-- dsi0pll
+ *                              |------------------------------|  /     +---------+
+ *                              |          +-----+             | /
+ *                              -----------| /4? |--o----------|/
+ *                                         +-----+  |           |
+ *                                                  |           |dsiclk_sel
+ *                                                  |
+ *                                                  dsi0_pll_post_out_div_clk
+ */
+
+#define DSI_BYTE_PLL_CLK		0
+#define DSI_PIXEL_PLL_CLK		1
+#define NUM_PROVIDED_CLKS		2
+
+struct dsi_pll_regs {
+	u32 pll_prop_gain_rate;
+	u32 pll_lockdet_rate;
+	u32 decimal_div_start;
+	u32 frac_div_start_low;
+	u32 frac_div_start_mid;
+	u32 frac_div_start_high;
+	u32 pll_clock_inverters;
+	u32 ssc_stepsize_low;
+	u32 ssc_stepsize_high;
+	u32 ssc_div_per_low;
+	u32 ssc_div_per_high;
+	u32 ssc_adjper_low;
+	u32 ssc_adjper_high;
+	u32 ssc_control;
+};
+
+struct dsi_pll_config {
+	u32 ref_freq;
+	bool div_override;
+	u32 output_div;
+	bool ignore_frac;
+	bool disable_prescaler;
+	bool enable_ssc;
+	bool ssc_center;
+	u32 dec_bits;
+	u32 frac_bits;
+	u32 lock_timer;
+	u32 ssc_freq;
+	u32 ssc_offset;
+	u32 ssc_adj_per;
+	u32 thresh_cycles;
+	u32 refclk_cycles;
+};
+
+struct pll_10nm_cached_state {
+	unsigned long vco_rate;
+	u8 bit_clk_div;
+	u8 pix_clk_div;
+	u8 pll_out_div;
+	u8 pll_mux;
+};
+
+struct dsi_pll_10nm {
+	struct msm_dsi_pll base;
+
+	int id;
+	struct platform_device *pdev;
+
+	void __iomem *phy_cmn_mmio;
+	void __iomem *mmio;
+
+	u64 vco_ref_clk_rate;
+	u64 vco_current_rate;
+
+	/* protects REG_DSI_10nm_PHY_CMN_CLK_CFG0 register */
+	spinlock_t postdiv_lock;
+
+	int vco_delay;
+	struct dsi_pll_config pll_configuration;
+	struct dsi_pll_regs reg_setup;
+
+	/* private clocks: */
+	struct clk_hw *hws[NUM_DSI_CLOCKS_MAX];
+	u32 num_hws;
+
+	/* clock-provider: */
+	struct clk_hw_onecell_data *hw_data;
+
+	struct pll_10nm_cached_state cached_state;
+
+	enum msm_dsi_phy_usecase uc;
+	struct dsi_pll_10nm *slave;
+};
+
+#define to_pll_10nm(x)	container_of(x, struct dsi_pll_10nm, base)
+
+/*
+ * Global list of private DSI PLL struct pointers. We need this for Dual DSI
+ * mode, where the master PLL's clk_ops needs access the slave's private data
+ */
+static struct dsi_pll_10nm *pll_10nm_list[DSI_MAX];
+
+static void dsi_pll_setup_config(struct dsi_pll_10nm *pll)
+{
+	struct dsi_pll_config *config = &pll->pll_configuration;
+
+	config->ref_freq = pll->vco_ref_clk_rate;
+	config->output_div = 1;
+	config->dec_bits = 8;
+	config->frac_bits = 18;
+	config->lock_timer = 64;
+	config->ssc_freq = 31500;
+	config->ssc_offset = 5000;
+	config->ssc_adj_per = 2;
+	config->thresh_cycles = 32;
+	config->refclk_cycles = 256;
+
+	config->div_override = false;
+	config->ignore_frac = false;
+	config->disable_prescaler = false;
+
+	config->enable_ssc = false;
+	config->ssc_center = 0;
+}
+
+static void dsi_pll_calc_dec_frac(struct dsi_pll_10nm *pll)
+{
+	struct dsi_pll_config *config = &pll->pll_configuration;
+	struct dsi_pll_regs *regs = &pll->reg_setup;
+	u64 fref = pll->vco_ref_clk_rate;
+	u64 pll_freq;
+	u64 divider;
+	u64 dec, dec_multiple;
+	u32 frac;
+	u64 multiplier;
+
+	pll_freq = pll->vco_current_rate;
+
+	if (config->disable_prescaler)
+		divider = fref;
+	else
+		divider = fref * 2;
+
+	multiplier = 1 << config->frac_bits;
+	dec_multiple = div_u64(pll_freq * multiplier, divider);
+	div_u64_rem(dec_multiple, multiplier, &frac);
+
+	dec = div_u64(dec_multiple, multiplier);
+
+	if (pll_freq <= 1900000000UL)
+		regs->pll_prop_gain_rate = 8;
+	else if (pll_freq <= 3000000000UL)
+		regs->pll_prop_gain_rate = 10;
+	else
+		regs->pll_prop_gain_rate = 12;
+	if (pll_freq < 1100000000UL)
+		regs->pll_clock_inverters = 8;
+	else
+		regs->pll_clock_inverters = 0;
+
+	regs->pll_lockdet_rate = config->lock_timer;
+	regs->decimal_div_start = dec;
+	regs->frac_div_start_low = (frac & 0xff);
+	regs->frac_div_start_mid = (frac & 0xff00) >> 8;
+	regs->frac_div_start_high = (frac & 0x30000) >> 16;
+}
+
+#define SSC_CENTER		BIT(0)
+#define SSC_EN			BIT(1)
+
+static void dsi_pll_calc_ssc(struct dsi_pll_10nm *pll)
+{
+	struct dsi_pll_config *config = &pll->pll_configuration;
+	struct dsi_pll_regs *regs = &pll->reg_setup;
+	u32 ssc_per;
+	u32 ssc_mod;
+	u64 ssc_step_size;
+	u64 frac;
+
+	if (!config->enable_ssc) {
+		DBG("SSC not enabled\n");
+		return;
+	}
+
+	ssc_per = DIV_ROUND_CLOSEST(config->ref_freq, config->ssc_freq) / 2 - 1;
+	ssc_mod = (ssc_per + 1) % (config->ssc_adj_per + 1);
+	ssc_per -= ssc_mod;
+
+	frac = regs->frac_div_start_low |
+			(regs->frac_div_start_mid << 8) |
+			(regs->frac_div_start_high << 16);
+	ssc_step_size = regs->decimal_div_start;
+	ssc_step_size *= (1 << config->frac_bits);
+	ssc_step_size += frac;
+	ssc_step_size *= config->ssc_offset;
+	ssc_step_size *= (config->ssc_adj_per + 1);
+	ssc_step_size = div_u64(ssc_step_size, (ssc_per + 1));
+	ssc_step_size = DIV_ROUND_CLOSEST_ULL(ssc_step_size, 1000000);
+
+	regs->ssc_div_per_low = ssc_per & 0xFF;
+	regs->ssc_div_per_high = (ssc_per & 0xFF00) >> 8;
+	regs->ssc_stepsize_low = (u32)(ssc_step_size & 0xFF);
+	regs->ssc_stepsize_high = (u32)((ssc_step_size & 0xFF00) >> 8);
+	regs->ssc_adjper_low = config->ssc_adj_per & 0xFF;
+	regs->ssc_adjper_high = (config->ssc_adj_per & 0xFF00) >> 8;
+
+	regs->ssc_control = config->ssc_center ? SSC_CENTER : 0;
+
+	pr_debug("SCC: Dec:%d, frac:%llu, frac_bits:%d\n",
+		 regs->decimal_div_start, frac, config->frac_bits);
+	pr_debug("SSC: div_per:0x%X, stepsize:0x%X, adjper:0x%X\n",
+		 ssc_per, (u32)ssc_step_size, config->ssc_adj_per);
+}
+
+static void dsi_pll_ssc_commit(struct dsi_pll_10nm *pll)
+{
+	void __iomem *base = pll->mmio;
+	struct dsi_pll_regs *regs = &pll->reg_setup;
+
+	if (pll->pll_configuration.enable_ssc) {
+		pr_debug("SSC is enabled\n");
+
+		pll_write(base + REG_DSI_10nm_PHY_PLL_SSC_STEPSIZE_LOW_1,
+			  regs->ssc_stepsize_low);
+		pll_write(base + REG_DSI_10nm_PHY_PLL_SSC_STEPSIZE_HIGH_1,
+			  regs->ssc_stepsize_high);
+		pll_write(base + REG_DSI_10nm_PHY_PLL_SSC_DIV_PER_LOW_1,
+			  regs->ssc_div_per_low);
+		pll_write(base + REG_DSI_10nm_PHY_PLL_SSC_DIV_PER_HIGH_1,
+			  regs->ssc_div_per_high);
+		pll_write(base + REG_DSI_10nm_PHY_PLL_SSC_DIV_ADJPER_LOW_1,
+			  regs->ssc_adjper_low);
+		pll_write(base + REG_DSI_10nm_PHY_PLL_SSC_DIV_ADJPER_HIGH_1,
+			  regs->ssc_adjper_high);
+		pll_write(base + REG_DSI_10nm_PHY_PLL_SSC_CONTROL,
+			  SSC_EN | regs->ssc_control);
+	}
+}
+
+static void dsi_pll_config_hzindep_reg(struct dsi_pll_10nm *pll)
+{
+	void __iomem *base = pll->mmio;
+
+	pll_write(base + REG_DSI_10nm_PHY_PLL_ANALOG_CONTROLS_ONE, 0x80);
+	pll_write(base + REG_DSI_10nm_PHY_PLL_ANALOG_CONTROLS_TWO, 0x03);
+	pll_write(base + REG_DSI_10nm_PHY_PLL_ANALOG_CONTROLS_THREE, 0x00);
+	pll_write(base + REG_DSI_10nm_PHY_PLL_DSM_DIVIDER, 0x00);
+	pll_write(base + REG_DSI_10nm_PHY_PLL_FEEDBACK_DIVIDER, 0x4e);
+	pll_write(base + REG_DSI_10nm_PHY_PLL_CALIBRATION_SETTINGS, 0x40);
+	pll_write(base + REG_DSI_10nm_PHY_PLL_BAND_SEL_CAL_SETTINGS_THREE,
+		  0xba);
+	pll_write(base + REG_DSI_10nm_PHY_PLL_FREQ_DETECT_SETTINGS_ONE, 0x0c);
+	pll_write(base + REG_DSI_10nm_PHY_PLL_OUTDIV, 0x00);
+	pll_write(base + REG_DSI_10nm_PHY_PLL_CORE_OVERRIDE, 0x00);
+	pll_write(base + REG_DSI_10nm_PHY_PLL_PLL_DIGITAL_TIMERS_TWO, 0x08);
+	pll_write(base + REG_DSI_10nm_PHY_PLL_PLL_PROP_GAIN_RATE_1, 0x08);
+	pll_write(base + REG_DSI_10nm_PHY_PLL_PLL_BAND_SET_RATE_1, 0xc0);
+	pll_write(base + REG_DSI_10nm_PHY_PLL_PLL_INT_GAIN_IFILT_BAND_1, 0xfa);
+	pll_write(base + REG_DSI_10nm_PHY_PLL_PLL_FL_INT_GAIN_PFILT_BAND_1,
+		  0x4c);
+	pll_write(base + REG_DSI_10nm_PHY_PLL_PLL_LOCK_OVERRIDE, 0x80);
+	pll_write(base + REG_DSI_10nm_PHY_PLL_PFILT, 0x29);
+	pll_write(base + REG_DSI_10nm_PHY_PLL_IFILT, 0x3f);
+}
+
+static void dsi_pll_commit(struct dsi_pll_10nm *pll)
+{
+	void __iomem *base = pll->mmio;
+	struct dsi_pll_regs *reg = &pll->reg_setup;
+
+	pll_write(base + REG_DSI_10nm_PHY_PLL_CORE_INPUT_OVERRIDE, 0x12);
+	pll_write(base + REG_DSI_10nm_PHY_PLL_DECIMAL_DIV_START_1,
+		  reg->decimal_div_start);
+	pll_write(base + REG_DSI_10nm_PHY_PLL_FRAC_DIV_START_LOW_1,
+		  reg->frac_div_start_low);
+	pll_write(base + REG_DSI_10nm_PHY_PLL_FRAC_DIV_START_MID_1,
+		  reg->frac_div_start_mid);
+	pll_write(base + REG_DSI_10nm_PHY_PLL_FRAC_DIV_START_HIGH_1,
+		  reg->frac_div_start_high);
+	pll_write(base + REG_DSI_10nm_PHY_PLL_PLL_LOCKDET_RATE_1, 0x40);
+	pll_write(base + REG_DSI_10nm_PHY_PLL_PLL_LOCK_DELAY, 0x06);
+	pll_write(base + REG_DSI_10nm_PHY_PLL_CMODE, 0x10);
+	pll_write(base + REG_DSI_10nm_PHY_PLL_CLOCK_INVERTERS,
+		  reg->pll_clock_inverters);
+}
+
+static int dsi_pll_10nm_vco_set_rate(struct clk_hw *hw, unsigned long rate,
+				     unsigned long parent_rate)
+{
+	struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
+	struct dsi_pll_10nm *pll_10nm = to_pll_10nm(pll);
+
+	DBG("DSI PLL%d rate=%lu, parent's=%lu", pll_10nm->id, rate,
+	    parent_rate);
+
+	pll_10nm->vco_current_rate = rate;
+	pll_10nm->vco_ref_clk_rate = parent_rate;
+
+	dsi_pll_setup_config(pll_10nm);
+
+	dsi_pll_calc_dec_frac(pll_10nm);
+
+	dsi_pll_calc_ssc(pll_10nm);
+
+	dsi_pll_commit(pll_10nm);
+
+	dsi_pll_config_hzindep_reg(pll_10nm);
+
+	dsi_pll_ssc_commit(pll_10nm);
+
+	/* flush, ensure all register writes are done*/
+	wmb();
+
+	return 0;
+}
+
+static int dsi_pll_10nm_lock_status(struct dsi_pll_10nm *pll)
+{
+	int rc;
+	u32 status = 0;
+	u32 const delay_us = 100;
+	u32 const timeout_us = 5000;
+
+	rc = readl_poll_timeout_atomic(pll->mmio +
+				       REG_DSI_10nm_PHY_PLL_COMMON_STATUS_ONE,
+				       status,
+				       ((status & BIT(0)) > 0),
+				       delay_us,
+				       timeout_us);
+	if (rc)
+		pr_err("DSI PLL(%d) lock failed, status=0x%08x\n",
+		       pll->id, status);
+
+	return rc;
+}
+
+static void dsi_pll_disable_pll_bias(struct dsi_pll_10nm *pll)
+{
+	u32 data = pll_read(pll->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_CTRL_0);
+
+	pll_write(pll->mmio + REG_DSI_10nm_PHY_PLL_SYSTEM_MUXES, 0);
+	pll_write(pll->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_CTRL_0,
+		  data & ~BIT(5));
+	ndelay(250);
+}
+
+static void dsi_pll_enable_pll_bias(struct dsi_pll_10nm *pll)
+{
+	u32 data = pll_read(pll->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_CTRL_0);
+
+	pll_write(pll->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_CTRL_0,
+		  data | BIT(5));
+	pll_write(pll->mmio + REG_DSI_10nm_PHY_PLL_SYSTEM_MUXES, 0xc0);
+	ndelay(250);
+}
+
+static void dsi_pll_disable_global_clk(struct dsi_pll_10nm *pll)
+{
+	u32 data;
+
+	data = pll_read(pll->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_CLK_CFG1);
+	pll_write(pll->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_CLK_CFG1,
+		  data & ~BIT(5));
+}
+
+static void dsi_pll_enable_global_clk(struct dsi_pll_10nm *pll)
+{
+	u32 data;
+
+	data = pll_read(pll->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_CLK_CFG1);
+	pll_write(pll->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_CLK_CFG1,
+		  data | BIT(5));
+}
+
+static int dsi_pll_10nm_vco_prepare(struct clk_hw *hw)
+{
+	struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
+	struct dsi_pll_10nm *pll_10nm = to_pll_10nm(pll);
+	int rc;
+
+	dsi_pll_enable_pll_bias(pll_10nm);
+	if (pll_10nm->slave)
+		dsi_pll_enable_pll_bias(pll_10nm->slave);
+
+	/* Start PLL */
+	pll_write(pll_10nm->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_PLL_CNTRL,
+		  0x01);
+
+	/*
+	 * ensure all PLL configurations are written prior to checking
+	 * for PLL lock.
+	 */
+	wmb();
+
+	/* Check for PLL lock */
+	rc = dsi_pll_10nm_lock_status(pll_10nm);
+	if (rc) {
+		pr_err("PLL(%d) lock failed\n", pll_10nm->id);
+		goto error;
+	}
+
+	pll->pll_on = true;
+
+	dsi_pll_enable_global_clk(pll_10nm);
+	if (pll_10nm->slave)
+		dsi_pll_enable_global_clk(pll_10nm->slave);
+
+	pll_write(pll_10nm->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_RBUF_CTRL,
+		  0x01);
+	if (pll_10nm->slave)
+		pll_write(pll_10nm->slave->phy_cmn_mmio +
+			  REG_DSI_10nm_PHY_CMN_RBUF_CTRL, 0x01);
+
+error:
+	return rc;
+}
+
+static void dsi_pll_disable_sub(struct dsi_pll_10nm *pll)
+{
+	pll_write(pll->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_RBUF_CTRL, 0);
+	dsi_pll_disable_pll_bias(pll);
+}
+
+static void dsi_pll_10nm_vco_unprepare(struct clk_hw *hw)
+{
+	struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
+	struct dsi_pll_10nm *pll_10nm = to_pll_10nm(pll);
+
+	/*
+	 * To avoid any stray glitches while abruptly powering down the PLL
+	 * make sure to gate the clock using the clock enable bit before
+	 * powering down the PLL
+	 */
+	dsi_pll_disable_global_clk(pll_10nm);
+	pll_write(pll_10nm->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_PLL_CNTRL, 0);
+	dsi_pll_disable_sub(pll_10nm);
+	if (pll_10nm->slave) {
+		dsi_pll_disable_global_clk(pll_10nm->slave);
+		dsi_pll_disable_sub(pll_10nm->slave);
+	}
+	/* flush, ensure all register writes are done */
+	wmb();
+	pll->pll_on = false;
+}
+
+static unsigned long dsi_pll_10nm_vco_recalc_rate(struct clk_hw *hw,
+						  unsigned long parent_rate)
+{
+	struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
+	struct dsi_pll_10nm *pll_10nm = to_pll_10nm(pll);
+	void __iomem *base = pll_10nm->mmio;
+	u64 ref_clk = pll_10nm->vco_ref_clk_rate;
+	u64 vco_rate = 0x0;
+	u64 multiplier;
+	u32 frac;
+	u32 dec;
+	u64 pll_freq, tmp64;
+
+	dec = pll_read(base + REG_DSI_10nm_PHY_PLL_DECIMAL_DIV_START_1);
+	dec &= 0xff;
+
+	frac = pll_read(base + REG_DSI_10nm_PHY_PLL_FRAC_DIV_START_LOW_1);
+	frac |= ((pll_read(base + REG_DSI_10nm_PHY_PLL_FRAC_DIV_START_MID_1) &
+		  0xff) << 8);
+	frac |= ((pll_read(base + REG_DSI_10nm_PHY_PLL_FRAC_DIV_START_HIGH_1) &
+		  0x3) << 16);
+
+	/*
+	 * TODO:
+	 *	1. Assumes prescaler is disabled
+	 *	2. Multiplier is 2^18. it should be 2^(num_of_frac_bits)
+	 */
+	multiplier = 1 << 18;
+	pll_freq = dec * (ref_clk * 2);
+	tmp64 = (ref_clk * 2 * frac);
+	pll_freq += div_u64(tmp64, multiplier);
+
+	vco_rate = pll_freq;
+
+	DBG("DSI PLL%d returning vco rate = %lu, dec = %x, frac = %x",
+	    pll_10nm->id, (unsigned long)vco_rate, dec, frac);
+
+	return (unsigned long)vco_rate;
+}
+
+static const struct clk_ops clk_ops_dsi_pll_10nm_vco = {
+	.round_rate = msm_dsi_pll_helper_clk_round_rate,
+	.set_rate = dsi_pll_10nm_vco_set_rate,
+	.recalc_rate = dsi_pll_10nm_vco_recalc_rate,
+	.prepare = dsi_pll_10nm_vco_prepare,
+	.unprepare = dsi_pll_10nm_vco_unprepare,
+};
+
+/*
+ * PLL Callbacks
+ */
+
+static void dsi_pll_10nm_save_state(struct msm_dsi_pll *pll)
+{
+	struct dsi_pll_10nm *pll_10nm = to_pll_10nm(pll);
+	struct pll_10nm_cached_state *cached = &pll_10nm->cached_state;
+	void __iomem *phy_base = pll_10nm->phy_cmn_mmio;
+	u32 cmn_clk_cfg0, cmn_clk_cfg1;
+
+	cached->pll_out_div = pll_read(pll_10nm->mmio +
+				       REG_DSI_10nm_PHY_PLL_PLL_OUTDIV_RATE);
+	cached->pll_out_div &= 0x3;
+
+	cmn_clk_cfg0 = pll_read(phy_base + REG_DSI_10nm_PHY_CMN_CLK_CFG0);
+	cached->bit_clk_div = cmn_clk_cfg0 & 0xf;
+	cached->pix_clk_div = (cmn_clk_cfg0 & 0xf0) >> 4;
+
+	cmn_clk_cfg1 = pll_read(phy_base + REG_DSI_10nm_PHY_CMN_CLK_CFG1);
+	cached->pll_mux = cmn_clk_cfg1 & 0x3;
+
+	DBG("DSI PLL%d outdiv %x bit_clk_div %x pix_clk_div %x pll_mux %x",
+	    pll_10nm->id, cached->pll_out_div, cached->bit_clk_div,
+	    cached->pix_clk_div, cached->pll_mux);
+}
+
+static int dsi_pll_10nm_restore_state(struct msm_dsi_pll *pll)
+{
+	struct dsi_pll_10nm *pll_10nm = to_pll_10nm(pll);
+	struct pll_10nm_cached_state *cached = &pll_10nm->cached_state;
+	void __iomem *phy_base = pll_10nm->phy_cmn_mmio;
+	u32 val;
+
+	val = pll_read(pll_10nm->mmio + REG_DSI_10nm_PHY_PLL_PLL_OUTDIV_RATE);
+	val &= ~0x3;
+	val |= cached->pll_out_div;
+	pll_write(pll_10nm->mmio + REG_DSI_10nm_PHY_PLL_PLL_OUTDIV_RATE, val);
+
+	pll_write(phy_base + REG_DSI_10nm_PHY_CMN_CLK_CFG0,
+		  cached->bit_clk_div | (cached->pix_clk_div << 4));
+
+	val = pll_read(phy_base + REG_DSI_10nm_PHY_CMN_CLK_CFG1);
+	val &= ~0x3;
+	val |= cached->pll_mux;
+	pll_write(phy_base + REG_DSI_10nm_PHY_CMN_CLK_CFG1, val);
+
+	DBG("DSI PLL%d", pll_10nm->id);
+
+	return 0;
+}
+
+static int dsi_pll_10nm_set_usecase(struct msm_dsi_pll *pll,
+				    enum msm_dsi_phy_usecase uc)
+{
+	struct dsi_pll_10nm *pll_10nm = to_pll_10nm(pll);
+	void __iomem *base = pll_10nm->phy_cmn_mmio;
+	u32 data = 0x0;	/* internal PLL */
+
+	DBG("DSI PLL%d", pll_10nm->id);
+
+	switch (uc) {
+	case MSM_DSI_PHY_STANDALONE:
+		break;
+	case MSM_DSI_PHY_MASTER:
+		pll_10nm->slave = pll_10nm_list[(pll_10nm->id + 1) % DSI_MAX];
+		break;
+	case MSM_DSI_PHY_SLAVE:
+		data = 0x1; /* external PLL */
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* set PLL src */
+	pll_write(base + REG_DSI_10nm_PHY_CMN_CLK_CFG1, (data << 2));
+
+	pll_10nm->uc = uc;
+
+	return 0;
+}
+
+static int dsi_pll_10nm_get_provider(struct msm_dsi_pll *pll,
+				     struct clk **byte_clk_provider,
+				     struct clk **pixel_clk_provider)
+{
+	struct dsi_pll_10nm *pll_10nm = to_pll_10nm(pll);
+	struct clk_hw_onecell_data *hw_data = pll_10nm->hw_data;
+
+	DBG("DSI PLL%d", pll_10nm->id);
+
+	if (byte_clk_provider)
+		*byte_clk_provider = hw_data->hws[DSI_BYTE_PLL_CLK]->clk;
+	if (pixel_clk_provider)
+		*pixel_clk_provider = hw_data->hws[DSI_PIXEL_PLL_CLK]->clk;
+
+	return 0;
+}
+
+static void dsi_pll_10nm_destroy(struct msm_dsi_pll *pll)
+{
+	struct dsi_pll_10nm *pll_10nm = to_pll_10nm(pll);
+
+	DBG("DSI PLL%d", pll_10nm->id);
+}
+
+/*
+ * The post dividers and mux clocks are created using the standard divider and
+ * mux API. Unlike the 14nm PHY, the slave PLL doesn't need its dividers/mux
+ * state to follow the master PLL's divider/mux state. Therefore, we don't
+ * require special clock ops that also configure the slave PLL registers
+ */
+static int pll_10nm_register(struct dsi_pll_10nm *pll_10nm)
+{
+	char clk_name[32], parent[32], vco_name[32];
+	char parent2[32], parent3[32], parent4[32];
+	struct clk_init_data vco_init = {
+		.parent_names = (const char *[]){ "xo" },
+		.num_parents = 1,
+		.name = vco_name,
+		.flags = CLK_IGNORE_UNUSED,
+		.ops = &clk_ops_dsi_pll_10nm_vco,
+	};
+	struct device *dev = &pll_10nm->pdev->dev;
+	struct clk_hw **hws = pll_10nm->hws;
+	struct clk_hw_onecell_data *hw_data;
+	struct clk_hw *hw;
+	int num = 0;
+	int ret;
+
+	DBG("DSI%d", pll_10nm->id);
+
+	hw_data = devm_kzalloc(dev, sizeof(*hw_data) +
+			       NUM_PROVIDED_CLKS * sizeof(struct clk_hw *),
+			       GFP_KERNEL);
+	if (!hw_data)
+		return -ENOMEM;
+
+	snprintf(vco_name, 32, "dsi%dvco_clk", pll_10nm->id);
+	pll_10nm->base.clk_hw.init = &vco_init;
+
+	ret = clk_hw_register(dev, &pll_10nm->base.clk_hw);
+	if (ret)
+		return ret;
+
+	hws[num++] = &pll_10nm->base.clk_hw;
+
+	snprintf(clk_name, 32, "dsi%d_pll_out_div_clk", pll_10nm->id);
+	snprintf(parent, 32, "dsi%dvco_clk", pll_10nm->id);
+
+	hw = clk_hw_register_divider(dev, clk_name,
+				     parent, CLK_SET_RATE_PARENT,
+				     pll_10nm->mmio +
+				     REG_DSI_10nm_PHY_PLL_PLL_OUTDIV_RATE,
+				     0, 2, CLK_DIVIDER_POWER_OF_TWO, NULL);
+	if (IS_ERR(hw))
+		return PTR_ERR(hw);
+
+	hws[num++] = hw;
+
+	snprintf(clk_name, 32, "dsi%d_pll_bit_clk", pll_10nm->id);
+	snprintf(parent, 32, "dsi%d_pll_out_div_clk", pll_10nm->id);
+
+	/* BIT CLK: DIV_CTRL_3_0 */
+	hw = clk_hw_register_divider(dev, clk_name, parent,
+				     CLK_SET_RATE_PARENT,
+				     pll_10nm->phy_cmn_mmio +
+				     REG_DSI_10nm_PHY_CMN_CLK_CFG0,
+				     0, 4, CLK_DIVIDER_ONE_BASED,
+				     &pll_10nm->postdiv_lock);
+	if (IS_ERR(hw))
+		return PTR_ERR(hw);
+
+	hws[num++] = hw;
+
+	snprintf(clk_name, 32, "dsi%dpllbyte", pll_10nm->id);
+	snprintf(parent, 32, "dsi%d_pll_bit_clk", pll_10nm->id);
+
+	/* DSI Byte clock = VCO_CLK / OUT_DIV / BIT_DIV / 8 */
+	hw = clk_hw_register_fixed_factor(dev, clk_name, parent,
+					  CLK_SET_RATE_PARENT, 1, 8);
+	if (IS_ERR(hw))
+		return PTR_ERR(hw);
+
+	hws[num++] = hw;
+	hw_data->hws[DSI_BYTE_PLL_CLK] = hw;
+
+	snprintf(clk_name, 32, "dsi%d_pll_by_2_bit_clk", pll_10nm->id);
+	snprintf(parent, 32, "dsi%d_pll_bit_clk", pll_10nm->id);
+
+	hw = clk_hw_register_fixed_factor(dev, clk_name, parent,
+					  0, 1, 2);
+	if (IS_ERR(hw))
+		return PTR_ERR(hw);
+
+	hws[num++] = hw;
+
+	snprintf(clk_name, 32, "dsi%d_pll_post_out_div_clk", pll_10nm->id);
+	snprintf(parent, 32, "dsi%d_pll_out_div_clk", pll_10nm->id);
+
+	hw = clk_hw_register_fixed_factor(dev, clk_name, parent,
+					  0, 1, 4);
+	if (IS_ERR(hw))
+		return PTR_ERR(hw);
+
+	hws[num++] = hw;
+
+	snprintf(clk_name, 32, "dsi%d_pclk_mux", pll_10nm->id);
+	snprintf(parent, 32, "dsi%d_pll_bit_clk", pll_10nm->id);
+	snprintf(parent2, 32, "dsi%d_pll_by_2_bit_clk", pll_10nm->id);
+	snprintf(parent3, 32, "dsi%d_pll_out_div_clk", pll_10nm->id);
+	snprintf(parent4, 32, "dsi%d_pll_post_out_div_clk", pll_10nm->id);
+
+	hw = clk_hw_register_mux(dev, clk_name,
+				 (const char *[]){
+				 parent, parent2, parent3, parent4
+				 }, 4, 0, pll_10nm->phy_cmn_mmio +
+				 REG_DSI_10nm_PHY_CMN_CLK_CFG1,
+				 0, 2, 0, NULL);
+	if (IS_ERR(hw))
+		return PTR_ERR(hw);
+
+	hws[num++] = hw;
+
+	snprintf(clk_name, 32, "dsi%dpll", pll_10nm->id);
+	snprintf(parent, 32, "dsi%d_pclk_mux", pll_10nm->id);
+
+	/* PIX CLK DIV : DIV_CTRL_7_4*/
+	hw = clk_hw_register_divider(dev, clk_name, parent,
+				     0, pll_10nm->phy_cmn_mmio +
+					REG_DSI_10nm_PHY_CMN_CLK_CFG0,
+				     4, 4, CLK_DIVIDER_ONE_BASED,
+				     &pll_10nm->postdiv_lock);
+	if (IS_ERR(hw))
+		return PTR_ERR(hw);
+
+	hws[num++] = hw;
+	hw_data->hws[DSI_PIXEL_PLL_CLK] = hw;
+
+	pll_10nm->num_hws = num;
+
+	hw_data->num = NUM_PROVIDED_CLKS;
+	pll_10nm->hw_data = hw_data;
+
+	ret = of_clk_add_hw_provider(dev->of_node, of_clk_hw_onecell_get,
+				     pll_10nm->hw_data);
+	if (ret) {
+		dev_err(dev, "failed to register clk provider: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+struct msm_dsi_pll *msm_dsi_pll_10nm_init(struct platform_device *pdev, int id)
+{
+	struct dsi_pll_10nm *pll_10nm;
+	struct msm_dsi_pll *pll;
+	int ret;
+
+	if (!pdev)
+		return ERR_PTR(-ENODEV);
+
+	pll_10nm = devm_kzalloc(&pdev->dev, sizeof(*pll_10nm), GFP_KERNEL);
+	if (!pll_10nm)
+		return ERR_PTR(-ENOMEM);
+
+	DBG("DSI PLL%d", id);
+
+	pll_10nm->pdev = pdev;
+	pll_10nm->id = id;
+	pll_10nm_list[id] = pll_10nm;
+
+	pll_10nm->phy_cmn_mmio = msm_ioremap(pdev, "dsi_phy", "DSI_PHY");
+	if (IS_ERR_OR_NULL(pll_10nm->phy_cmn_mmio)) {
+		dev_err(&pdev->dev, "failed to map CMN PHY base\n");
+		return ERR_PTR(-ENOMEM);
+	}
+
+	pll_10nm->mmio = msm_ioremap(pdev, "dsi_pll", "DSI_PLL");
+	if (IS_ERR_OR_NULL(pll_10nm->mmio)) {
+		dev_err(&pdev->dev, "failed to map PLL base\n");
+		return ERR_PTR(-ENOMEM);
+	}
+
+	pll = &pll_10nm->base;
+	pll->min_rate = 1000000000UL;
+	pll->max_rate = 3500000000UL;
+	pll->get_provider = dsi_pll_10nm_get_provider;
+	pll->destroy = dsi_pll_10nm_destroy;
+	pll->save_state = dsi_pll_10nm_save_state;
+	pll->restore_state = dsi_pll_10nm_restore_state;
+	pll->set_usecase = dsi_pll_10nm_set_usecase;
+
+	pll_10nm->vco_delay = 1;
+
+	ret = pll_10nm_register(pll_10nm);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register PLL: %d\n", ret);
+		return ERR_PTR(ret);
+	}
+
+	/* TODO: Remove this when we have proper display handover support */
+	msm_dsi_pll_save_state(pll);
+
+	return pll;
+}