summaryrefslogtreecommitdiffstats
path: root/drivers/gpio/gpio-langwell.c
diff options
context:
space:
mode:
authorMika Westerberg <mika.westerberg@linux.intel.com>2012-04-05 12:15:17 +0300
committerGrant Likely <grant.likely@secretlab.ca>2012-04-05 21:39:02 -0700
commitf5f93117f4ac24b8493cda67e6a1443517d26845 (patch)
tree0245bf2c9947ec40d82aaae81be5ecede22bfa29 /drivers/gpio/gpio-langwell.c
parentb3e35af2b0ea9ad1618e01f40a1ffee83333ef35 (diff)
downloadtalos-op-linux-f5f93117f4ac24b8493cda67e6a1443517d26845.tar.gz
talos-op-linux-f5f93117f4ac24b8493cda67e6a1443517d26845.zip
gpio/langwell: clear IRQ edge detect registers at init
The boot firmware might leave the registers configured causing interrupts to happen even when no handler for them is yet registered. Fix this by clearing the IRQ edge detect registers at init. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Diffstat (limited to 'drivers/gpio/gpio-langwell.c')
-rw-r--r--drivers/gpio/gpio-langwell.c21
1 files changed, 21 insertions, 0 deletions
diff --git a/drivers/gpio/gpio-langwell.c b/drivers/gpio/gpio-langwell.c
index bc15ae3d7cf2..52f00d3cf667 100644
--- a/drivers/gpio/gpio-langwell.c
+++ b/drivers/gpio/gpio-langwell.c
@@ -263,6 +263,24 @@ static void lnw_irq_handler(unsigned irq, struct irq_desc *desc)
chip->irq_eoi(data);
}
+static void lnw_irq_init_hw(struct lnw_gpio *lnw)
+{
+ void __iomem *reg;
+ unsigned base;
+
+ for (base = 0; base < lnw->chip.ngpio; base += 32) {
+ /* Clear the rising-edge detect register */
+ reg = gpio_reg(&lnw->chip, base, GRER);
+ writel(0, reg);
+ /* Clear the falling-edge detect register */
+ reg = gpio_reg(&lnw->chip, base, GFER);
+ writel(0, reg);
+ /* Clear the edge detect status register */
+ reg = gpio_reg(&lnw->chip, base, GEDR);
+ writel(~0, reg);
+ }
+}
+
#ifdef CONFIG_PM
static int lnw_gpio_runtime_resume(struct device *dev)
{
@@ -371,6 +389,9 @@ static int __devinit lnw_gpio_probe(struct pci_dev *pdev,
dev_err(&pdev->dev, "langwell gpiochip_add error %d\n", retval);
goto err4;
}
+
+ lnw_irq_init_hw(lnw);
+
irq_set_handler_data(pdev->irq, lnw);
irq_set_chained_handler(pdev->irq, lnw_irq_handler);
for (i = 0; i < lnw->chip.ngpio; i++) {
OpenPOWER on IntegriCloud