Merge tag 'gpio-v5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v5.5 kernel cycle

  Core changes:

   - Expose pull up/down flags for the GPIO character device to
     userspace.

     After clear input from the RaspberryPi and Beagle communities, it
     has been established that prototyping, industrial automation and
     make communities strongly need this feature, and as we want people
     to use the character device, we have implemented the simple pull
     up/down interface for GPIO lines.

     This means we can specify that a (chip-specific) pull up/down
     resistor can be enabled, but does not offer fine-grained control
     such as cases where the resistance of the same pull resistor can be
     controlled (yet).

   - Introduce devm_fwnode_gpiod_get_index() and start to phase out the
     old symbol devm_fwnode_get_index_gpiod_from_child().

   - A bit of documentation clean-up work.

   - Introduce a define for GPIO line directions and deploy it in all
     GPIO drivers in the drivers/gpio directory.

   - Add a special callback to populate pin ranges when cooperating with
     the pin control subsystem and registering ranges as part of adding
     a gpiolib driver and a gpio_irq_chip driver at the same time. This
     is also deployed in the Intel Merrifield driver.

  New drivers:

   - RDA Micro GPIO controller.

   - XGS-iproc GPIO driver.

  Driver improvements:

   - Wake event and debounce support on the Tegra 186 driver.

   - Finalize the Aspeed SGPIO driver.

   - MPC8xxx uses a normal IRQ handler rather than a chained handler"

* tag 'gpio-v5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (64 commits)
  gpio: Add TODO item for regmap helper
  Documentation: gpio: driver.rst: Fix warnings
  gpio: of: Fix bogus reference to gpiod_get_count()
  gpiolib: Grammar s/manager/managed/
  gpio: lynxpoint: Setup correct IRQ handlers
  MAINTAINERS: Replace my email by one @kernel.org
  gpiolib: acpi: Make acpi_gpiochip_alloc_event always return AE_OK
  gpio/mpc8xxx: fix qoriq GPIO reading
  gpio: mpc8xxx: Don't overwrite default irq_set_type callback
  gpiolib: acpi: Print pin number on acpi_gpiochip_alloc_event errors
  gpiolib: fix coding style in gpiod_hog()
  drm/bridge: ti-tfp410: switch to using fwnode_gpiod_get_index()
  gpio: merrifield: Pass irqchip when adding gpiochip
  gpio: merrifield: Add GPIO <-> pin mapping ranges via callback
  gpiolib: Introduce ->add_pin_ranges() callback
  gpio: mmio: remove untrue leftover comment
  gpio: em: Use platform_get_irq() to obtain interrupts
  gpio: tegra186: Add debounce support
  gpio: tegra186: Program interrupt route mapping
  gpio: tegra186: Derive register offsets from bank/port
  ...

1 files changed, 6 insertions, 3 deletions

diff --git a/drivers/gpio/gpio-bd70528.c b/drivers/gpio/gpio-bd70528.c
index 4ba4d4a67881..45b3da8da336 100644
--- a/drivers/gpio/gpio-bd70528.c
+++ b/drivers/gpio/gpio-bd70528.c
@@ -54,8 +54,10 @@ static int bd70528_get_direction(struct gpio_chip *chip, unsigned int offset)
 		dev_err(bdgpio->chip.dev, "Could not read gpio direction\n");
 		return ret;
 	}
+	if (val & BD70528_GPIO_OUT_EN_MASK)
+		return GPIO_LINE_DIRECTION_OUT;
 
-	return !(val & BD70528_GPIO_OUT_EN_MASK);
+	return GPIO_LINE_DIRECTION_IN;
 }
 
 static int bd70528_gpio_set_config(struct gpio_chip *chip, unsigned int offset,
@@ -166,9 +168,9 @@ static int bd70528_gpio_get(struct gpio_chip *chip, unsigned int offset)
 	 * locking would make no sense.
 	 */
 	ret = bd70528_get_direction(chip, offset);
-	if (ret == 0)
+	if (ret == GPIO_LINE_DIRECTION_OUT)
 		ret = bd70528_gpio_get_o(bdgpio, offset);
-	else if (ret == 1)
+	else if (ret == GPIO_LINE_DIRECTION_IN)
 		ret = bd70528_gpio_get_i(bdgpio, offset);
 	else
 		dev_err(bdgpio->chip.dev, "failed to read GPIO direction\n");
@@ -230,3 +232,4 @@ module_platform_driver(bd70528_gpio);
 MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>");
 MODULE_DESCRIPTION("BD70528 voltage regulator driver");
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:bd70528-gpio");