Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "This time we've got one core change to introduce a bulk clk_get API,
  some new clk drivers and updates for old ones. The diff is pretty
  spread out across a handful of different SoC clk drivers for Broadcom,
  TI, Qualcomm, Renesas, Rockchip, Samsung, and Allwinner, mostly due to
  the introduction of new drivers.

  Core:
   - New clk bulk get APIs
   - Clk divider APIs gained the ability to consider a different parent
     than the current one

  New Drivers:
   - Renesas r8a779{0,1,2,4} CPG/MSSR
   - TI Keystone SCI firmware controlled clks and OMAP4 clkctrl
   - Qualcomm IPQ8074 SoCs
   - Cortina Systems Gemini (SL3516/CS3516)
   - Rockchip rk3128 SoCs
   - Allwinner A83T clk control units
   - Broadcom Stingray SoCs
   - CPU clks for Mediatek MT8173/MT2701/MT7623 SoCs

  Removed Drivers:
   - Old non-DT version of the Realview clk driver

  Updates:
   - Renesas Kconfig/Makefile cleanups
   - Amlogic CEC EE clk support
   - Improved Armada 7K/8K cp110 clk support
   - Rockchip clk id exposing, critical clk markings
   - Samsung converted to clk_hw registration APIs
   - Fixes for Samsung exynos5420 audio clks
   - USB2 clks for Hisilicon hi3798cv200 SoC and video/camera clks for
     hi3660"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (147 commits)
  clk: gemini: Read status before using the value
  clk: scpi: error when clock fails to register
  clk: at91: Add sama5d2 suspend/resume
  gpio: dt-bindings: Add documentation for gpio controllers on Armada 7K/8K
  clk: keystone: TI_SCI_PROTOCOL is needed for clk driver
  clk: samsung: audss: Fix silent hang on Exynos4412 due to disabled EPLL
  clk: uniphier: provide NAND controller clock rate
  clk: hisilicon: add usb2 clocks for hi3798cv200 SoC
  clk: Add Gemini SoC clock controller
  clk: iproc: Remove __init marking on iproc_pll_clk_setup()
  clk: bcm: Add clocks for Stingray SOC
  dt-bindings: clk: Extend binding doc for Stingray SOC
  clk: mediatek: export cpu multiplexer clock for MT8173 SoCs
  clk: mediatek: export cpu multiplexer clock for MT2701/MT7623 SoCs
  clk: mediatek: add missing cpu mux causing Mediatek cpufreq can't work
  clk: renesas: cpg-mssr: Use of_device_get_match_data() helper
  clk: hi6220: add acpu clock
  clk: zx296718: export I2S mux clocks
  clk: imx7d: create clocks behind rawnand clock gate
  clk: hi3660: Set PPLL2 to 2880M
  ...

1 files changed, 327 insertions, 0 deletions

diff --git a/drivers/clk/bcm/clk-sr.c b/drivers/clk/bcm/clk-sr.c
new file mode 100644
index 000000000000..adc74f4584cf
--- /dev/null
+++ b/drivers/clk/bcm/clk-sr.c
@@ -0,0 +1,327 @@
+/*
+ * Copyright 2017 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation (the "GPL").
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License version 2 (GPLv2) for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * version 2 (GPLv2) along with this source code.
+ */
+
+#include <linux/err.h>
+#include <linux/clk-provider.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+
+#include <dt-bindings/clock/bcm-sr.h>
+#include "clk-iproc.h"
+
+#define REG_VAL(o, s, w) { .offset = o, .shift = s, .width = w, }
+
+#define AON_VAL(o, pw, ps, is) { .offset = o, .pwr_width = pw, \
+	.pwr_shift = ps, .iso_shift = is }
+
+#define SW_CTRL_VAL(o, s) { .offset = o, .shift = s, }
+
+#define RESET_VAL(o, rs, prs) { .offset = o, .reset_shift = rs, \
+	.p_reset_shift = prs }
+
+#define DF_VAL(o, kis, kiw, kps, kpw, kas, kaw) { .offset = o, \
+	.ki_shift = kis, .ki_width = kiw, .kp_shift = kps, .kp_width = kpw, \
+	.ka_shift = kas, .ka_width = kaw }
+
+#define VCO_CTRL_VAL(uo, lo) { .u_offset = uo, .l_offset = lo }
+
+#define ENABLE_VAL(o, es, hs, bs) { .offset = o, .enable_shift = es, \
+	.hold_shift = hs, .bypass_shift = bs }
+
+
+static const struct iproc_pll_ctrl sr_genpll0 = {
+	.flags = IPROC_CLK_AON | IPROC_CLK_PLL_HAS_NDIV_FRAC |
+		IPROC_CLK_PLL_NEEDS_SW_CFG,
+	.aon = AON_VAL(0x0, 5, 1, 0),
+	.reset = RESET_VAL(0x0, 12, 11),
+	.dig_filter = DF_VAL(0x0, 4, 3, 0, 4, 7, 3),
+	.sw_ctrl = SW_CTRL_VAL(0x10, 31),
+	.ndiv_int = REG_VAL(0x10, 20, 10),
+	.ndiv_frac = REG_VAL(0x10, 0, 20),
+	.pdiv = REG_VAL(0x14, 0, 4),
+	.status = REG_VAL(0x30, 12, 1),
+};
+
+static const struct iproc_clk_ctrl sr_genpll0_clk[] = {
+	[BCM_SR_GENPLL0_SATA_CLK] = {
+		.channel = BCM_SR_GENPLL0_SATA_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x4, 6, 0, 12),
+		.mdiv = REG_VAL(0x18, 0, 9),
+	},
+	[BCM_SR_GENPLL0_SCR_CLK] = {
+		.channel = BCM_SR_GENPLL0_SCR_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x4, 7, 1, 13),
+		.mdiv = REG_VAL(0x18, 10, 9),
+	},
+	[BCM_SR_GENPLL0_250M_CLK] = {
+		.channel = BCM_SR_GENPLL0_250M_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x4, 8, 2, 14),
+		.mdiv = REG_VAL(0x18, 20, 9),
+	},
+	[BCM_SR_GENPLL0_PCIE_AXI_CLK] = {
+		.channel = BCM_SR_GENPLL0_PCIE_AXI_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x4, 9, 3, 15),
+		.mdiv = REG_VAL(0x1c, 0, 9),
+	},
+	[BCM_SR_GENPLL0_PAXC_AXI_X2_CLK] = {
+		.channel = BCM_SR_GENPLL0_PAXC_AXI_X2_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x4, 10, 4, 16),
+		.mdiv = REG_VAL(0x1c, 10, 9),
+	},
+	[BCM_SR_GENPLL0_PAXC_AXI_CLK] = {
+		.channel = BCM_SR_GENPLL0_PAXC_AXI_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x4, 11, 5, 17),
+		.mdiv = REG_VAL(0x1c, 20, 9),
+	},
+};
+
+static int sr_genpll0_clk_init(struct platform_device *pdev)
+{
+	iproc_pll_clk_setup(pdev->dev.of_node,
+			    &sr_genpll0, NULL, 0, sr_genpll0_clk,
+			    ARRAY_SIZE(sr_genpll0_clk));
+	return 0;
+}
+
+static const struct iproc_pll_ctrl sr_genpll3 = {
+	.flags = IPROC_CLK_AON | IPROC_CLK_PLL_HAS_NDIV_FRAC |
+		IPROC_CLK_PLL_NEEDS_SW_CFG,
+	.aon = AON_VAL(0x0, 1, 19, 18),
+	.reset = RESET_VAL(0x0, 12, 11),
+	.dig_filter = DF_VAL(0x0, 4, 3, 0, 4, 7, 3),
+	.sw_ctrl = SW_CTRL_VAL(0x10, 31),
+	.ndiv_int = REG_VAL(0x10, 20, 10),
+	.ndiv_frac = REG_VAL(0x10, 0, 20),
+	.pdiv = REG_VAL(0x14, 0, 4),
+	.status = REG_VAL(0x30, 12, 1),
+};
+
+static const struct iproc_clk_ctrl sr_genpll3_clk[] = {
+	[BCM_SR_GENPLL3_HSLS_CLK] = {
+		.channel = BCM_SR_GENPLL3_HSLS_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x4, 6, 0, 12),
+		.mdiv = REG_VAL(0x18, 0, 9),
+	},
+	[BCM_SR_GENPLL3_SDIO_CLK] = {
+		.channel = BCM_SR_GENPLL3_SDIO_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x4, 7, 1, 13),
+		.mdiv = REG_VAL(0x18, 10, 9),
+	},
+};
+
+static void sr_genpll3_clk_init(struct device_node *node)
+{
+	iproc_pll_clk_setup(node, &sr_genpll3, NULL, 0, sr_genpll3_clk,
+			    ARRAY_SIZE(sr_genpll3_clk));
+}
+CLK_OF_DECLARE(sr_genpll3_clk, "brcm,sr-genpll3", sr_genpll3_clk_init);
+
+static const struct iproc_pll_ctrl sr_genpll4 = {
+	.flags = IPROC_CLK_AON | IPROC_CLK_PLL_HAS_NDIV_FRAC |
+		IPROC_CLK_PLL_NEEDS_SW_CFG,
+	.aon = AON_VAL(0x0, 1, 25, 24),
+	.reset = RESET_VAL(0x0, 12, 11),
+	.dig_filter = DF_VAL(0x0, 4, 3, 0, 4, 7, 3),
+	.sw_ctrl = SW_CTRL_VAL(0x10, 31),
+	.ndiv_int = REG_VAL(0x10, 20, 10),
+	.ndiv_frac = REG_VAL(0x10, 0, 20),
+	.pdiv = REG_VAL(0x14, 0, 4),
+	.status = REG_VAL(0x30, 12, 1),
+};
+
+static const struct iproc_clk_ctrl sr_genpll4_clk[] = {
+	[BCM_SR_GENPLL4_CCN_CLK] = {
+		.channel = BCM_SR_GENPLL4_CCN_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x4, 6, 0, 12),
+		.mdiv = REG_VAL(0x18, 0, 9),
+	},
+};
+
+static int sr_genpll4_clk_init(struct platform_device *pdev)
+{
+	iproc_pll_clk_setup(pdev->dev.of_node,
+			    &sr_genpll4, NULL, 0, sr_genpll4_clk,
+			    ARRAY_SIZE(sr_genpll4_clk));
+	return 0;
+}
+
+static const struct iproc_pll_ctrl sr_genpll5 = {
+	.flags = IPROC_CLK_AON | IPROC_CLK_PLL_HAS_NDIV_FRAC |
+		IPROC_CLK_PLL_NEEDS_SW_CFG,
+	.aon = AON_VAL(0x0, 1, 1, 0),
+	.reset = RESET_VAL(0x0, 12, 11),
+	.dig_filter = DF_VAL(0x0, 4, 3, 0, 4, 7, 3),
+	.sw_ctrl = SW_CTRL_VAL(0x10, 31),
+	.ndiv_int = REG_VAL(0x10, 20, 10),
+	.ndiv_frac = REG_VAL(0x10, 0, 20),
+	.pdiv = REG_VAL(0x14, 0, 4),
+	.status = REG_VAL(0x30, 12, 1),
+};
+
+static const struct iproc_clk_ctrl sr_genpll5_clk[] = {
+	[BCM_SR_GENPLL5_FS_CLK] = {
+		.channel = BCM_SR_GENPLL5_FS_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x4, 6, 0, 12),
+		.mdiv = REG_VAL(0x18, 0, 9),
+	},
+	[BCM_SR_GENPLL5_SPU_CLK] = {
+		.channel = BCM_SR_GENPLL5_SPU_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x4, 6, 0, 12),
+		.mdiv = REG_VAL(0x18, 10, 9),
+	},
+};
+
+static int sr_genpll5_clk_init(struct platform_device *pdev)
+{
+	iproc_pll_clk_setup(pdev->dev.of_node,
+			    &sr_genpll5, NULL, 0, sr_genpll5_clk,
+			    ARRAY_SIZE(sr_genpll5_clk));
+	return 0;
+}
+
+static const struct iproc_pll_ctrl sr_lcpll0 = {
+	.flags = IPROC_CLK_AON | IPROC_CLK_PLL_NEEDS_SW_CFG,
+	.aon = AON_VAL(0x0, 2, 19, 18),
+	.reset = RESET_VAL(0x0, 31, 30),
+	.sw_ctrl = SW_CTRL_VAL(0x4, 31),
+	.ndiv_int = REG_VAL(0x4, 16, 10),
+	.pdiv = REG_VAL(0x4, 26, 4),
+	.status = REG_VAL(0x38, 12, 1),
+};
+
+static const struct iproc_clk_ctrl sr_lcpll0_clk[] = {
+	[BCM_SR_LCPLL0_SATA_REF_CLK] = {
+		.channel = BCM_SR_LCPLL0_SATA_REF_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 7, 1, 13),
+		.mdiv = REG_VAL(0x14, 0, 9),
+	},
+	[BCM_SR_LCPLL0_USB_REF_CLK] = {
+		.channel = BCM_SR_LCPLL0_USB_REF_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 8, 2, 14),
+		.mdiv = REG_VAL(0x14, 10, 9),
+	},
+	[BCM_SR_LCPLL0_SATA_REFPN_CLK] = {
+		.channel = BCM_SR_LCPLL0_SATA_REFPN_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 9, 3, 15),
+		.mdiv = REG_VAL(0x14, 20, 9),
+	},
+};
+
+static int sr_lcpll0_clk_init(struct platform_device *pdev)
+{
+	iproc_pll_clk_setup(pdev->dev.of_node,
+			    &sr_lcpll0, NULL, 0, sr_lcpll0_clk,
+			    ARRAY_SIZE(sr_lcpll0_clk));
+	return 0;
+}
+
+static const struct iproc_pll_ctrl sr_lcpll1 = {
+	.flags = IPROC_CLK_AON | IPROC_CLK_PLL_NEEDS_SW_CFG,
+	.aon = AON_VAL(0x0, 2, 22, 21),
+	.reset = RESET_VAL(0x0, 31, 30),
+	.sw_ctrl = SW_CTRL_VAL(0x4, 31),
+	.ndiv_int = REG_VAL(0x4, 16, 10),
+	.pdiv = REG_VAL(0x4, 26, 4),
+	.status = REG_VAL(0x38, 12, 1),
+};
+
+static const struct iproc_clk_ctrl sr_lcpll1_clk[] = {
+	[BCM_SR_LCPLL1_WAN_CLK] = {
+		.channel = BCM_SR_LCPLL1_WAN_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 7, 1, 13),
+		.mdiv = REG_VAL(0x14, 0, 9),
+	},
+};
+
+static int sr_lcpll1_clk_init(struct platform_device *pdev)
+{
+	iproc_pll_clk_setup(pdev->dev.of_node,
+			    &sr_lcpll1, NULL, 0, sr_lcpll1_clk,
+			    ARRAY_SIZE(sr_lcpll1_clk));
+	return 0;
+}
+
+static const struct iproc_pll_ctrl sr_lcpll_pcie = {
+	.flags = IPROC_CLK_AON | IPROC_CLK_PLL_NEEDS_SW_CFG,
+	.aon = AON_VAL(0x0, 2, 25, 24),
+	.reset = RESET_VAL(0x0, 31, 30),
+	.sw_ctrl = SW_CTRL_VAL(0x4, 31),
+	.ndiv_int = REG_VAL(0x4, 16, 10),
+	.pdiv = REG_VAL(0x4, 26, 4),
+	.status = REG_VAL(0x38, 12, 1),
+};
+
+static const struct iproc_clk_ctrl sr_lcpll_pcie_clk[] = {
+	[BCM_SR_LCPLL_PCIE_PHY_REF_CLK] = {
+		.channel = BCM_SR_LCPLL_PCIE_PHY_REF_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 7, 1, 13),
+		.mdiv = REG_VAL(0x14, 0, 9),
+	},
+};
+
+static int sr_lcpll_pcie_clk_init(struct platform_device *pdev)
+{
+	iproc_pll_clk_setup(pdev->dev.of_node,
+			    &sr_lcpll_pcie, NULL, 0, sr_lcpll_pcie_clk,
+			    ARRAY_SIZE(sr_lcpll_pcie_clk));
+	return 0;
+}
+
+static const struct of_device_id sr_clk_dt_ids[] = {
+	{ .compatible = "brcm,sr-genpll0", .data = sr_genpll0_clk_init },
+	{ .compatible = "brcm,sr-genpll4", .data = sr_genpll4_clk_init },
+	{ .compatible = "brcm,sr-genpll5", .data = sr_genpll5_clk_init },
+	{ .compatible = "brcm,sr-lcpll0", .data = sr_lcpll0_clk_init },
+	{ .compatible = "brcm,sr-lcpll1", .data = sr_lcpll1_clk_init },
+	{ .compatible = "brcm,sr-lcpll-pcie", .data = sr_lcpll_pcie_clk_init },
+	{ /* sentinel */ }
+};
+
+static int sr_clk_probe(struct platform_device *pdev)
+{
+	int (*probe_func)(struct platform_device *);
+
+	probe_func = of_device_get_match_data(&pdev->dev);
+	if (!probe_func)
+		return -ENODEV;
+
+	return probe_func(pdev);
+}
+
+static struct platform_driver sr_clk_driver = {
+	.driver = {
+		.name = "sr-clk",
+		.of_match_table = sr_clk_dt_ids,
+	},
+	.probe = sr_clk_probe,
+};
+builtin_platform_driver(sr_clk_driver);