diff options
author | chas williams - CONTRACTOR <chas@cmf.nrl.navy.mil> | 2010-05-29 09:03:44 +0000 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2010-05-31 00:27:46 -0700 |
commit | 098fde114bf6655f4b75d71dbea208d039fc1de3 (patch) | |
tree | ea889dae935d8ca04508694929a0d17fde42ac1a /drivers/atm/nicstar.h | |
parent | 741a00be1f6bfa027225f44703ab72a741b757b7 (diff) | |
download | talos-op-linux-098fde114bf6655f4b75d71dbea208d039fc1de3.tar.gz talos-op-linux-098fde114bf6655f4b75d71dbea208d039fc1de3.zip |
atm: [nicstar] reformatted with Lindent
Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/atm/nicstar.h')
-rw-r--r-- | drivers/atm/nicstar.h | 578 |
1 files changed, 255 insertions, 323 deletions
diff --git a/drivers/atm/nicstar.h b/drivers/atm/nicstar.h index 6010e3daa6a2..43eb2db1fb88 100644 --- a/drivers/atm/nicstar.h +++ b/drivers/atm/nicstar.h @@ -1,5 +1,4 @@ -/****************************************************************************** - * +/* * nicstar.h * * Header file for the nicstar device driver. @@ -8,15 +7,12 @@ * PowerPC support by Jay Talbott (jay_talbott@mcg.mot.com) April 1999 * * (C) INESC 1998 - * - ******************************************************************************/ - + */ #ifndef _LINUX_NICSTAR_H_ #define _LINUX_NICSTAR_H_ - -/* Includes *******************************************************************/ +/* Includes */ #include <linux/types.h> #include <linux/pci.h> @@ -25,12 +21,11 @@ #include <linux/atmdev.h> #include <linux/atm_nicstar.h> - -/* Options ********************************************************************/ +/* Options */ #define NS_MAX_CARDS 4 /* Maximum number of NICStAR based cards controlled by the device driver. Must - be <= 5 */ + be <= 5 */ #undef RCQ_SUPPORT /* Do not define this for now */ @@ -43,7 +38,7 @@ #define NS_VPIBITS 2 /* 0, 1, 2, or 8 */ #define NS_MAX_RCTSIZE 4096 /* Number of entries. 4096 or 16384. - Define 4096 only if (all) your card(s) + Define 4096 only if (all) your card(s) have 32K x 32bit SRAM, in which case setting this to 16384 will just waste a lot of memory. @@ -51,33 +46,32 @@ 128K x 32bit SRAM will limit the maximum VCI. */ -/*#define NS_PCI_LATENCY 64*/ /* Must be a multiple of 32 */ + /*#define NS_PCI_LATENCY 64*//* Must be a multiple of 32 */ /* Number of buffers initially allocated */ -#define NUM_SB 32 /* Must be even */ -#define NUM_LB 24 /* Must be even */ -#define NUM_HB 8 /* Pre-allocated huge buffers */ -#define NUM_IOVB 48 /* Iovec buffers */ +#define NUM_SB 32 /* Must be even */ +#define NUM_LB 24 /* Must be even */ +#define NUM_HB 8 /* Pre-allocated huge buffers */ +#define NUM_IOVB 48 /* Iovec buffers */ /* Lower level for count of buffers */ -#define MIN_SB 8 /* Must be even */ -#define MIN_LB 8 /* Must be even */ +#define MIN_SB 8 /* Must be even */ +#define MIN_LB 8 /* Must be even */ #define MIN_HB 6 #define MIN_IOVB 8 /* Upper level for count of buffers */ -#define MAX_SB 64 /* Must be even, <= 508 */ -#define MAX_LB 48 /* Must be even, <= 508 */ +#define MAX_SB 64 /* Must be even, <= 508 */ +#define MAX_LB 48 /* Must be even, <= 508 */ #define MAX_HB 10 #define MAX_IOVB 80 /* These are the absolute maximum allowed for the ioctl() */ -#define TOP_SB 256 /* Must be even, <= 508 */ -#define TOP_LB 128 /* Must be even, <= 508 */ +#define TOP_SB 256 /* Must be even, <= 508 */ +#define TOP_LB 128 /* Must be even, <= 508 */ #define TOP_HB 64 #define TOP_IOVB 256 - #define MAX_TBD_PER_VC 1 /* Number of TBDs before a TSR */ #define MAX_TBD_PER_SCQ 10 /* Only meaningful for variable rate SCQs */ @@ -89,15 +83,12 @@ #define PCR_TOLERANCE (1.0001) - - -/* ESI stuff ******************************************************************/ +/* ESI stuff */ #define NICSTAR_EPROM_MAC_ADDR_OFFSET 0x6C #define NICSTAR_EPROM_MAC_ADDR_OFFSET_ALT 0xF6 - -/* #defines *******************************************************************/ +/* #defines */ #define NS_IOREMAP_SIZE 4096 @@ -123,22 +114,19 @@ #define NS_SMSKBSIZE (NS_SMBUFSIZE + NS_AAL0_HEADER) #define NS_LGSKBSIZE (NS_SMBUFSIZE + NS_LGBUFSIZE) +/* NICStAR structures located in host memory */ -/* NICStAR structures located in host memory **********************************/ - - - -/* RSQ - Receive Status Queue +/* + * RSQ - Receive Status Queue * * Written by the NICStAR, read by the device driver. */ -typedef struct ns_rsqe -{ - u32 word_1; - u32 buffer_handle; - u32 final_aal5_crc32; - u32 word_4; +typedef struct ns_rsqe { + u32 word_1; + u32 buffer_handle; + u32 final_aal5_crc32; + u32 word_4; } ns_rsqe; #define ns_rsqe_vpi(ns_rsqep) \ @@ -175,30 +163,27 @@ typedef struct ns_rsqe #define ns_rsqe_cellcount(ns_rsqep) \ (le32_to_cpu((ns_rsqep)->word_4) & 0x000001FF) #define ns_rsqe_init(ns_rsqep) \ - ((ns_rsqep)->word_4 = cpu_to_le32(0x00000000)) + ((ns_rsqep)->word_4 = cpu_to_le32(0x00000000)) #define NS_RSQ_NUM_ENTRIES (NS_RSQSIZE / 16) #define NS_RSQ_ALIGNMENT NS_RSQSIZE - - -/* RCQ - Raw Cell Queue +/* + * RCQ - Raw Cell Queue * * Written by the NICStAR, read by the device driver. */ -typedef struct cell_payload -{ - u32 word[12]; +typedef struct cell_payload { + u32 word[12]; } cell_payload; -typedef struct ns_rcqe -{ - u32 word_1; - u32 word_2; - u32 word_3; - u32 word_4; - cell_payload payload; +typedef struct ns_rcqe { + u32 word_1; + u32 word_2; + u32 word_3; + u32 word_4; + cell_payload payload; } ns_rcqe; #define NS_RCQE_SIZE 64 /* bytes */ @@ -210,28 +195,25 @@ typedef struct ns_rcqe #define ns_rcqe_nextbufhandle(ns_rcqep) \ (le32_to_cpu((ns_rcqep)->word_2)) - - -/* SCQ - Segmentation Channel Queue +/* + * SCQ - Segmentation Channel Queue * * Written by the device driver, read by the NICStAR. */ -typedef struct ns_scqe -{ - u32 word_1; - u32 word_2; - u32 word_3; - u32 word_4; +typedef struct ns_scqe { + u32 word_1; + u32 word_2; + u32 word_3; + u32 word_4; } ns_scqe; /* NOTE: SCQ entries can be either a TBD (Transmit Buffer Descriptors) - or TSR (Transmit Status Requests) */ + or TSR (Transmit Status Requests) */ #define NS_SCQE_TYPE_TBD 0x00000000 #define NS_SCQE_TYPE_TSR 0x80000000 - #define NS_TBD_EOPDU 0x40000000 #define NS_TBD_AAL0 0x00000000 #define NS_TBD_AAL34 0x04000000 @@ -253,10 +235,9 @@ typedef struct ns_scqe #define ns_tbd_mkword_4(gfc, vpi, vci, pt, clp) \ (cpu_to_le32((gfc) << 28 | (vpi) << 20 | (vci) << 4 | (pt) << 1 | (clp))) - #define NS_TSR_INTENABLE 0x20000000 -#define NS_TSR_SCDISVBR 0xFFFF /* Use as scdi for VBR SCD */ +#define NS_TSR_SCDISVBR 0xFFFF /* Use as scdi for VBR SCD */ #define ns_tsr_mkword_1(flags) \ (cpu_to_le32(NS_SCQE_TYPE_TSR | (flags))) @@ -273,22 +254,20 @@ typedef struct ns_scqe #define NS_SCQE_SIZE 16 - - -/* TSQ - Transmit Status Queue +/* + * TSQ - Transmit Status Queue * * Written by the NICStAR, read by the device driver. */ -typedef struct ns_tsi -{ - u32 word_1; - u32 word_2; +typedef struct ns_tsi { + u32 word_1; + u32 word_2; } ns_tsi; /* NOTE: The first word can be a status word copied from the TSR which - originated the TSI, or a timer overflow indicator. In this last - case, the value of the first word is all zeroes. */ + originated the TSI, or a timer overflow indicator. In this last + case, the value of the first word is all zeroes. */ #define NS_TSI_EMPTY 0x80000000 #define NS_TSI_TIMESTAMP_MASK 0x00FFFFFF @@ -301,12 +280,10 @@ typedef struct ns_tsi #define ns_tsi_init(ns_tsip) \ ((ns_tsip)->word_2 = cpu_to_le32(NS_TSI_EMPTY)) - #define NS_TSQSIZE 8192 #define NS_TSQ_NUM_ENTRIES 1024 #define NS_TSQ_ALIGNMENT 8192 - #define NS_TSI_SCDISVBR NS_TSR_SCDISVBR #define ns_tsi_tmrof(ns_tsip) \ @@ -316,26 +293,22 @@ typedef struct ns_tsi #define ns_tsi_getscqpos(ns_tsip) \ (le32_to_cpu((ns_tsip)->word_1) & 0x00007FFF) +/* NICStAR structures located in local SRAM */ - -/* NICStAR structures located in local SRAM ***********************************/ - - - -/* RCT - Receive Connection Table +/* + * RCT - Receive Connection Table * * Written by both the NICStAR and the device driver. */ -typedef struct ns_rcte -{ - u32 word_1; - u32 buffer_handle; - u32 dma_address; - u32 aal5_crc32; +typedef struct ns_rcte { + u32 word_1; + u32 buffer_handle; + u32 dma_address; + u32 aal5_crc32; } ns_rcte; -#define NS_RCTE_BSFB 0x00200000 /* Rev. D only */ +#define NS_RCTE_BSFB 0x00200000 /* Rev. D only */ #define NS_RCTE_NZGFC 0x00100000 #define NS_RCTE_CONNECTOPEN 0x00080000 #define NS_RCTE_AALMASK 0x00070000 @@ -358,25 +331,21 @@ typedef struct ns_rcte #define NS_RCT_ENTRY_SIZE 4 /* Number of dwords */ /* NOTE: We could make macros to contruct the first word of the RCTE, - but that doesn't seem to make much sense... */ - - + but that doesn't seem to make much sense... */ -/* FBD - Free Buffer Descriptor +/* + * FBD - Free Buffer Descriptor * * Written by the device driver using via the command register. */ -typedef struct ns_fbd -{ - u32 buffer_handle; - u32 dma_address; +typedef struct ns_fbd { + u32 buffer_handle; + u32 dma_address; } ns_fbd; - - - -/* TST - Transmit Schedule Table +/* + * TST - Transmit Schedule Table * * Written by the device driver. */ @@ -385,40 +354,38 @@ typedef u32 ns_tste; #define NS_TST_OPCODE_MASK 0x60000000 -#define NS_TST_OPCODE_NULL 0x00000000 /* Insert null cell */ -#define NS_TST_OPCODE_FIXED 0x20000000 /* Cell from a fixed rate channel */ +#define NS_TST_OPCODE_NULL 0x00000000 /* Insert null cell */ +#define NS_TST_OPCODE_FIXED 0x20000000 /* Cell from a fixed rate channel */ #define NS_TST_OPCODE_VARIABLE 0x40000000 -#define NS_TST_OPCODE_END 0x60000000 /* Jump */ +#define NS_TST_OPCODE_END 0x60000000 /* Jump */ #define ns_tste_make(opcode, sramad) (opcode | sramad) /* NOTE: - When the opcode is FIXED, sramad specifies the SRAM address of the - SCD for that fixed rate channel. + SCD for that fixed rate channel. - When the opcode is END, sramad specifies the SRAM address of the - location of the next TST entry to read. + location of the next TST entry to read. */ - - -/* SCD - Segmentation Channel Descriptor +/* + * SCD - Segmentation Channel Descriptor * * Written by both the device driver and the NICStAR */ -typedef struct ns_scd -{ - u32 word_1; - u32 word_2; - u32 partial_aal5_crc; - u32 reserved; - ns_scqe cache_a; - ns_scqe cache_b; +typedef struct ns_scd { + u32 word_1; + u32 word_2; + u32 partial_aal5_crc; + u32 reserved; + ns_scqe cache_a; + ns_scqe cache_b; } ns_scd; -#define NS_SCD_BASE_MASK_VAR 0xFFFFE000 /* Variable rate */ -#define NS_SCD_BASE_MASK_FIX 0xFFFFFC00 /* Fixed rate */ +#define NS_SCD_BASE_MASK_VAR 0xFFFFE000 /* Variable rate */ +#define NS_SCD_BASE_MASK_FIX 0xFFFFFC00 /* Fixed rate */ #define NS_SCD_TAIL_MASK_VAR 0x00001FF0 #define NS_SCD_TAIL_MASK_FIX 0x000003F0 #define NS_SCD_HEAD_MASK_VAR 0x00001FF0 @@ -426,13 +393,9 @@ typedef struct ns_scd #define NS_SCD_XMITFOREVER 0x02000000 /* NOTE: There are other fields in word 2 of the SCD, but as they should - not be needed in the device driver they are not defined here. */ - - - - -/* NICStAR local SRAM memory map **********************************************/ + not be needed in the device driver they are not defined here. */ +/* NICStAR local SRAM memory map */ #define NS_RCT 0x00000 #define NS_RCT_32_END 0x03FFF @@ -455,100 +418,93 @@ typedef struct ns_scd #define NS_LGFBQ 0x1FC00 #define NS_LGFBQ_END 0x1FFFF - - -/* NISCtAR operation registers ************************************************/ - +/* NISCtAR operation registers */ /* See Section 3.4 of `IDT77211 NICStAR User Manual' from www.idt.com */ -enum ns_regs -{ - DR0 = 0x00, /* Data Register 0 R/W*/ - DR1 = 0x04, /* Data Register 1 W */ - DR2 = 0x08, /* Data Register 2 W */ - DR3 = 0x0C, /* Data Register 3 W */ - CMD = 0x10, /* Command W */ - CFG = 0x14, /* Configuration R/W */ - STAT = 0x18, /* Status R/W */ - RSQB = 0x1C, /* Receive Status Queue Base W */ - RSQT = 0x20, /* Receive Status Queue Tail R */ - RSQH = 0x24, /* Receive Status Queue Head W */ - CDC = 0x28, /* Cell Drop Counter R/clear */ - VPEC = 0x2C, /* VPI/VCI Lookup Error Count R/clear */ - ICC = 0x30, /* Invalid Cell Count R/clear */ - RAWCT = 0x34, /* Raw Cell Tail R */ - TMR = 0x38, /* Timer R */ - TSTB = 0x3C, /* Transmit Schedule Table Base R/W */ - TSQB = 0x40, /* Transmit Status Queue Base W */ - TSQT = 0x44, /* Transmit Status Queue Tail R */ - TSQH = 0x48, /* Transmit Status Queue Head W */ - GP = 0x4C, /* General Purpose R/W */ - VPM = 0x50 /* VPI/VCI Mask W */ +enum ns_regs { + DR0 = 0x00, /* Data Register 0 R/W */ + DR1 = 0x04, /* Data Register 1 W */ + DR2 = 0x08, /* Data Register 2 W */ + DR3 = 0x0C, /* Data Register 3 W */ + CMD = 0x10, /* Command W */ + CFG = 0x14, /* Configuration R/W */ + STAT = 0x18, /* Status R/W */ + RSQB = 0x1C, /* Receive Status Queue Base W */ + RSQT = 0x20, /* Receive Status Queue Tail R */ + RSQH = 0x24, /* Receive Status Queue Head W */ + CDC = 0x28, /* Cell Drop Counter R/clear */ + VPEC = 0x2C, /* VPI/VCI Lookup Error Count R/clear */ + ICC = 0x30, /* Invalid Cell Count R/clear */ + RAWCT = 0x34, /* Raw Cell Tail R */ + TMR = 0x38, /* Timer R */ + TSTB = 0x3C, /* Transmit Schedule Table Base R/W */ + TSQB = 0x40, /* Transmit Status Queue Base W */ + TSQT = 0x44, /* Transmit Status Queue Tail R */ + TSQH = 0x48, /* Transmit Status Queue Head W */ + GP = 0x4C, /* General Purpose R/W */ + VPM = 0x50 /* VPI/VCI Mask W */ }; - -/* NICStAR commands issued to the CMD register ********************************/ - +/* NICStAR commands issued to the CMD register */ /* Top 4 bits are command opcode, lower 28 are parameters. */ #define NS_CMD_NO_OPERATION 0x00000000 - /* params always 0 */ + /* params always 0 */ #define NS_CMD_OPENCLOSE_CONNECTION 0x20000000 - /* b19{1=open,0=close} b18-2{SRAM addr} */ + /* b19{1=open,0=close} b18-2{SRAM addr} */ #define NS_CMD_WRITE_SRAM 0x40000000 - /* b18-2{SRAM addr} b1-0{burst size} */ + /* b18-2{SRAM addr} b1-0{burst size} */ #define NS_CMD_READ_SRAM 0x50000000 - /* b18-2{SRAM addr} */ + /* b18-2{SRAM addr} */ #define NS_CMD_WRITE_FREEBUFQ 0x60000000 - /* b0{large buf indicator} */ + /* b0{large buf indicator} */ #define NS_CMD_READ_UTILITY 0x80000000 - /* b8{1=select UTL_CS1} b9{1=select UTL_CS0} b7-0{bus addr} */ + /* b8{1=select UTL_CS1} b9{1=select UTL_CS0} b7-0{bus addr} */ #define NS_CMD_WRITE_UTILITY 0x90000000 - /* b8{1=select UTL_CS1} b9{1=select UTL_CS0} b7-0{bus addr} */ + /* b8{1=select UTL_CS1} b9{1=select UTL_CS0} b7-0{bus addr} */ #define NS_CMD_OPEN_CONNECTION (NS_CMD_OPENCLOSE_CONNECTION | 0x00080000) #define NS_CMD_CLOSE_CONNECTION NS_CMD_OPENCLOSE_CONNECTION - -/* NICStAR configuration bits *************************************************/ - -#define NS_CFG_SWRST 0x80000000 /* Software Reset */ -#define NS_CFG_RXPATH 0x20000000 /* Receive Path Enable */ -#define NS_CFG_SMBUFSIZE_MASK 0x18000000 /* Small Receive Buffer Size */ -#define NS_CFG_LGBUFSIZE_MASK 0x06000000 /* Large Receive Buffer Size */ -#define NS_CFG_EFBIE 0x01000000 /* Empty Free Buffer Queue - Interrupt Enable */ -#define NS_CFG_RSQSIZE_MASK 0x00C00000 /* Receive Status Queue Size */ -#define NS_CFG_ICACCEPT 0x00200000 /* Invalid Cell Accept */ -#define NS_CFG_IGNOREGFC 0x00100000 /* Ignore General Flow Control */ -#define NS_CFG_VPIBITS_MASK 0x000C0000 /* VPI/VCI Bits Size Select */ -#define NS_CFG_RCTSIZE_MASK 0x00030000 /* Receive Connection Table Size */ -#define NS_CFG_VCERRACCEPT 0x00008000 /* VPI/VCI Error Cell Accept */ -#define NS_CFG_RXINT_MASK 0x00007000 /* End of Receive PDU Interrupt - Handling */ -#define NS_CFG_RAWIE 0x00000800 /* Raw Cell Qu' Interrupt Enable */ -#define NS_CFG_RSQAFIE 0x00000400 /* Receive Queue Almost Full - Interrupt Enable */ -#define NS_CFG_RXRM 0x00000200 /* Receive RM Cells */ -#define NS_CFG_TMRROIE 0x00000080 /* Timer Roll Over Interrupt - Enable */ -#define NS_CFG_TXEN 0x00000020 /* Transmit Operation Enable */ -#define NS_CFG_TXIE 0x00000010 /* Transmit Status Interrupt - Enable */ -#define NS_CFG_TXURIE 0x00000008 /* Transmit Under-run Interrupt - Enable */ -#define NS_CFG_UMODE 0x00000004 /* Utopia Mode (cell/byte) Select */ -#define NS_CFG_TSQFIE 0x00000002 /* Transmit Status Queue Full - Interrupt Enable */ -#define NS_CFG_PHYIE 0x00000001 /* PHY Interrupt Enable */ +/* NICStAR configuration bits */ + +#define NS_CFG_SWRST 0x80000000 /* Software Reset */ +#define NS_CFG_RXPATH 0x20000000 /* Receive Path Enable */ +#define NS_CFG_SMBUFSIZE_MASK 0x18000000 /* Small Receive Buffer Size */ +#define NS_CFG_LGBUFSIZE_MASK 0x06000000 /* Large Receive Buffer Size */ +#define NS_CFG_EFBIE 0x01000000 /* Empty Free Buffer Queue + Interrupt Enable */ +#define NS_CFG_RSQSIZE_MASK 0x00C00000 /* Receive Status Queue Size */ +#define NS_CFG_ICACCEPT 0x00200000 /* Invalid Cell Accept */ +#define NS_CFG_IGNOREGFC 0x00100000 /* Ignore General Flow Control */ +#define NS_CFG_VPIBITS_MASK 0x000C0000 /* VPI/VCI Bits Size Select */ +#define NS_CFG_RCTSIZE_MASK 0x00030000 /* Receive Connection Table Size */ +#define NS_CFG_VCERRACCEPT 0x00008000 /* VPI/VCI Error Cell Accept */ +#define NS_CFG_RXINT_MASK 0x00007000 /* End of Receive PDU Interrupt + Handling */ +#define NS_CFG_RAWIE 0x00000800 /* Raw Cell Qu' Interrupt Enable */ +#define NS_CFG_RSQAFIE 0x00000400 /* Receive Queue Almost Full + Interrupt Enable */ +#define NS_CFG_RXRM 0x00000200 /* Receive RM Cells */ +#define NS_CFG_TMRROIE 0x00000080 /* Timer Roll Over Interrupt + Enable */ +#define NS_CFG_TXEN 0x00000020 /* Transmit Operation Enable */ +#define NS_CFG_TXIE 0x00000010 /* Transmit Status Interrupt + Enable */ +#define NS_CFG_TXURIE 0x00000008 /* Transmit Under-run Interrupt + Enable */ +#define NS_CFG_UMODE 0x00000004 /* Utopia Mode (cell/byte) Select */ +#define NS_CFG_TSQFIE 0x00000002 /* Transmit Status Queue Full + Interrupt Enable */ +#define NS_CFG_PHYIE 0x00000001 /* PHY Interrupt Enable */ #define NS_CFG_SMBUFSIZE_48 0x00000000 #define NS_CFG_SMBUFSIZE_96 0x08000000 @@ -579,33 +535,29 @@ enum ns_regs #define NS_CFG_RXINT_624US 0x00003000 #define NS_CFG_RXINT_899US 0x00004000 - -/* NICStAR STATus bits ********************************************************/ - -#define NS_STAT_SFBQC_MASK 0xFF000000 /* hi 8 bits Small Buffer Queue Count */ -#define NS_STAT_LFBQC_MASK 0x00FF0000 /* hi 8 bits Large Buffer Queue Count */ -#define NS_STAT_TSIF 0x00008000 /* Transmit Status Queue Indicator */ -#define NS_STAT_TXICP 0x00004000 /* Transmit Incomplete PDU */ -#define NS_STAT_TSQF 0x00001000 /* Transmit Status Queue Full */ -#define NS_STAT_TMROF 0x00000800 /* Timer Overflow */ -#define NS_STAT_PHYI 0x00000400 /* PHY Device Interrupt */ -#define NS_STAT_CMDBZ 0x00000200 /* Command Busy */ -#define NS_STAT_SFBQF 0x00000100 /* Small Buffer Queue Full */ -#define NS_STAT_LFBQF 0x00000080 /* Large Buffer Queue Full */ -#define NS_STAT_RSQF 0x00000040 /* Receive Status Queue Full */ -#define NS_STAT_EOPDU 0x00000020 /* End of PDU */ -#define NS_STAT_RAWCF 0x00000010 /* Raw Cell Flag */ -#define NS_STAT_SFBQE 0x00000008 /* Small Buffer Queue Empty */ -#define NS_STAT_LFBQE 0x00000004 /* Large Buffer Queue Empty */ -#define NS_STAT_RSQAF 0x00000002 /* Receive Status Queue Almost Full */ +/* NICStAR STATus bits */ + +#define NS_STAT_SFBQC_MASK 0xFF000000 /* hi 8 bits Small Buffer Queue Count */ +#define NS_STAT_LFBQC_MASK 0x00FF0000 /* hi 8 bits Large Buffer Queue Count */ +#define NS_STAT_TSIF 0x00008000 /* Transmit Status Queue Indicator */ +#define NS_STAT_TXICP 0x00004000 /* Transmit Incomplete PDU */ +#define NS_STAT_TSQF 0x00001000 /* Transmit Status Queue Full */ +#define NS_STAT_TMROF 0x00000800 /* Timer Overflow */ +#define NS_STAT_PHYI 0x00000400 /* PHY Device Interrupt */ +#define NS_STAT_CMDBZ 0x00000200 /* Command Busy */ +#define NS_STAT_SFBQF 0x00000100 /* Small Buffer Queue Full */ +#define NS_STAT_LFBQF 0x00000080 /* Large Buffer Queue Full */ +#define NS_STAT_RSQF 0x00000040 /* Receive Status Queue Full */ +#define NS_STAT_EOPDU 0x00000020 /* End of PDU */ +#define NS_STAT_RAWCF 0x00000010 /* Raw Cell Flag */ +#define NS_STAT_SFBQE 0x00000008 /* Small Buffer Queue Empty */ +#define NS_STAT_LFBQE 0x00000004 /* Large Buffer Queue Empty */ +#define NS_STAT_RSQAF 0x00000002 /* Receive Status Queue Almost Full */ #define ns_stat_sfbqc_get(stat) (((stat) & NS_STAT_SFBQC_MASK) >> 23) #define ns_stat_lfbqc_get(stat) (((stat) & NS_STAT_LFBQC_MASK) >> 15) - - -/* #defines which depend on other #defines ************************************/ - +/* #defines which depend on other #defines */ #define NS_TST0 NS_TST_FRSCD #define NS_TST1 (NS_TST_FRSCD + NS_TST_NUM_ENTRIES + 1) @@ -672,8 +624,7 @@ enum ns_regs #define NS_CFG_TSQFIE_OPT 0x00000000 #endif /* ENABLE_TSQFIE */ - -/* PCI stuff ******************************************************************/ +/* PCI stuff */ #ifndef PCI_VENDOR_ID_IDT #define PCI_VENDOR_ID_IDT 0x111D @@ -683,138 +634,119 @@ enum ns_regs #define PCI_DEVICE_ID_IDT_IDT77201 0x0001 #endif /* PCI_DEVICE_ID_IDT_IDT77201 */ - - -/* Device driver structures ***************************************************/ - +/* Device driver structures */ struct ns_skb_cb { - u32 buf_type; /* BUF_SM/BUF_LG/BUF_NONE */ + u32 buf_type; /* BUF_SM/BUF_LG/BUF_NONE */ }; #define NS_SKB_CB(skb) ((struct ns_skb_cb *)((skb)->cb)) -typedef struct tsq_info -{ - void *org; - ns_tsi *base; - ns_tsi *next; - ns_tsi *last; +typedef struct tsq_info { + void *org; + ns_tsi *base; + ns_tsi *next; + ns_tsi *last; } tsq_info; - -typedef struct scq_info -{ - void *org; - ns_scqe *base; - ns_scqe *last; - ns_scqe *next; - volatile ns_scqe *tail; /* Not related to the nicstar register */ - unsigned num_entries; - struct sk_buff **skb; /* Pointer to an array of pointers - to the sk_buffs used for tx */ - u32 scd; /* SRAM address of the corresponding - SCD */ - int tbd_count; /* Only meaningful on variable rate */ - wait_queue_head_t scqfull_waitq; - volatile char full; /* SCQ full indicator */ - spinlock_t lock; /* SCQ spinlock */ +typedef struct scq_info { + void *org; + ns_scqe *base; + ns_scqe *last; + ns_scqe *next; + volatile ns_scqe *tail; /* Not related to the nicstar register */ + unsigned num_entries; + struct sk_buff **skb; /* Pointer to an array of pointers + to the sk_buffs used for tx */ + u32 scd; /* SRAM address of the corresponding + SCD */ + int tbd_count; /* Only meaningful on variable rate */ + wait_queue_head_t scqfull_waitq; + volatile char full; /* SCQ full indicator */ + spinlock_t lock; /* SCQ spinlock */ } scq_info; - - -typedef struct rsq_info -{ - void *org; - ns_rsqe *base; - ns_rsqe *next; - ns_rsqe *last; +typedef struct rsq_info { + void *org; + ns_rsqe *base; + ns_rsqe *next; + ns_rsqe *last; } rsq_info; - -typedef struct skb_pool -{ - volatile int count; /* number of buffers in the queue */ - struct sk_buff_head queue; +typedef struct skb_pool { + volatile int count; /* number of buffers in the queue */ + struct sk_buff_head queue; } skb_pool; /* NOTE: for small and large buffer pools, the count is not used, as the actual value used for buffer management is the one read from the card. */ - -typedef struct vc_map -{ - volatile unsigned int tx:1; /* TX vc? */ - volatile unsigned int rx:1; /* RX vc? */ - struct atm_vcc *tx_vcc, *rx_vcc; - struct sk_buff *rx_iov; /* RX iovector skb */ - scq_info *scq; /* To keep track of the SCQ */ - u32 cbr_scd; /* SRAM address of the corresponding - SCD. 0x00000000 for UBR/VBR/ABR */ - int tbd_count; +typedef struct vc_map { + volatile unsigned int tx:1; /* TX vc? */ + volatile unsigned int rx:1; /* RX vc? */ + struct atm_vcc *tx_vcc, *rx_vcc; + struct sk_buff *rx_iov; /* RX iovector skb */ + scq_info *scq; /* To keep track of the SCQ */ + u32 cbr_scd; /* SRAM address of the corresponding + SCD. 0x00000000 for UBR/VBR/ABR */ + int tbd_count; } vc_map; - -struct ns_skb_data -{ +struct ns_skb_data { struct atm_vcc *vcc; int iovcnt; }; #define NS_SKB(skb) (((struct ns_skb_data *) (skb)->cb)) - -typedef struct ns_dev -{ - int index; /* Card ID to the device driver */ - int sram_size; /* In k x 32bit words. 32 or 128 */ - void __iomem *membase; /* Card's memory base address */ - unsigned long max_pcr; - int rct_size; /* Number of entries */ - int vpibits; - int vcibits; - struct pci_dev *pcidev; - struct atm_dev *atmdev; - tsq_info tsq; - rsq_info rsq; - scq_info *scq0, *scq1, *scq2; /* VBR SCQs */ - skb_pool sbpool; /* Small buffers */ - skb_pool lbpool; /* Large buffers */ - skb_pool hbpool; /* Pre-allocated huge buffers */ - skb_pool iovpool; /* iovector buffers */ - volatile int efbie; /* Empty free buf. queue int. enabled */ - volatile u32 tst_addr; /* SRAM address of the TST in use */ - volatile int tst_free_entries; - vc_map vcmap[NS_MAX_RCTSIZE]; - vc_map *tste2vc[NS_TST_NUM_ENTRIES]; - vc_map *scd2vc[NS_FRSCD_NUM]; - buf_nr sbnr; - buf_nr lbnr; - buf_nr hbnr; - buf_nr iovnr; - int sbfqc; - int lbfqc; - u32 sm_handle; - u32 sm_addr; - u32 lg_handle; - u32 lg_addr; - struct sk_buff *rcbuf; /* Current raw cell buffer */ - u32 rawch; /* Raw cell queue head */ - unsigned intcnt; /* Interrupt counter */ - spinlock_t int_lock; /* Interrupt lock */ - spinlock_t res_lock; /* Card resource lock */ +typedef struct ns_dev { + int index; /* Card ID to the device driver */ + int sram_size; /* In k x 32bit words. 32 or 128 */ + void __iomem *membase; /* Card's memory base address */ + unsigned long max_pcr; + int rct_size; /* Number of entries */ + int vpibits; + int vcibits; + struct pci_dev *pcidev; + struct atm_dev *atmdev; + tsq_info tsq; + rsq_info rsq; + scq_info *scq0, *scq1, *scq2; /* VBR SCQs */ + skb_pool sbpool; /* Small buffers */ + skb_pool lbpool; /* Large buffers */ + skb_pool hbpool; /* Pre-allocated huge buffers */ + skb_pool iovpool; /* iovector buffers */ + volatile int efbie; /* Empty free buf. queue int. enabled */ + volatile u32 tst_addr; /* SRAM address of the TST in use */ + volatile int tst_free_entries; + vc_map vcmap[NS_MAX_RCTSIZE]; + vc_map *tste2vc[NS_TST_NUM_ENTRIES]; + vc_map *scd2vc[NS_FRSCD_NUM]; + buf_nr sbnr; + buf_nr lbnr; + buf_nr hbnr; + buf_nr iovnr; + int sbfqc; + int lbfqc; + u32 sm_handle; + u32 sm_addr; + u32 lg_handle; + u32 lg_addr; + struct sk_buff *rcbuf; /* Current raw cell buffer */ + u32 rawch; /* Raw cell queue head */ + unsigned intcnt; /* Interrupt counter */ + spinlock_t int_lock; /* Interrupt lock */ + spinlock_t res_lock; /* Card resource lock */ } ns_dev; - /* NOTE: Each tste2vc entry relates a given TST entry to the corresponding - CBR vc. If the entry is not allocated, it must be NULL. - - There are two TSTs so the driver can modify them on the fly - without stopping the transmission. - - scd2vc allows us to find out unused fixed rate SCDs, because - they must have a NULL pointer here. */ + CBR vc. If the entry is not allocated, it must be NULL. + + There are two TSTs so the driver can modify them on the fly + without stopping the transmission. + scd2vc allows us to find out unused fixed rate SCDs, because + they must have a NULL pointer here. */ #endif /* _LINUX_NICSTAR_H_ */ |