Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6

Conflicts:
	drivers/scsi/fcoe/fcoe.c

1 files changed, 30 insertions, 4 deletions

diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 01831312c360..94919ad03df1 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -2783,6 +2783,12 @@ static int ata_eh_revalidate_and_attach(struct ata_link *link,
 		} else if (dev->class == ATA_DEV_UNKNOWN &&
 			   ehc->tries[dev->devno] &&
 			   ata_class_enabled(ehc->classes[dev->devno])) {
+			/* Temporarily set dev->class, it will be
+			 * permanently set once all configurations are
+			 * complete.  This is necessary because new
+			 * device configuration is done in two
+			 * separate loops.
+			 */
 			dev->class = ehc->classes[dev->devno];
 
 			if (dev->class == ATA_DEV_PMP)
@@ -2790,6 +2796,11 @@ static int ata_eh_revalidate_and_attach(struct ata_link *link,
 			else
 				rc = ata_dev_read_id(dev, &dev->class,
 						     readid_flags, dev->id);
+
+			/* read_id might have changed class, store and reset */
+			ehc->classes[dev->devno] = dev->class;
+			dev->class = ATA_DEV_UNKNOWN;
+
 			switch (rc) {
 			case 0:
 				/* clear error info accumulated during probe */
@@ -2799,13 +2810,11 @@ static int ata_eh_revalidate_and_attach(struct ata_link *link,
 			case -ENOENT:
 				/* IDENTIFY was issued to non-existent
 				 * device.  No need to reset.  Just
-				 * thaw and kill the device.
+				 * thaw and ignore the device.
 				 */
 				ata_eh_thaw_port(ap);
-				dev->class = ATA_DEV_UNKNOWN;
 				break;
 			default:
-				dev->class = ATA_DEV_UNKNOWN;
 				goto err;
 			}
 		}
@@ -2826,11 +2835,15 @@ static int ata_eh_revalidate_and_attach(struct ata_link *link,
 		    dev->class == ATA_DEV_PMP)
 			continue;
 
+		dev->class = ehc->classes[dev->devno];
+
 		ehc->i.flags |= ATA_EHI_PRINTINFO;
 		rc = ata_dev_configure(dev);
 		ehc->i.flags &= ~ATA_EHI_PRINTINFO;
-		if (rc)
+		if (rc) {
+			dev->class = ATA_DEV_UNKNOWN;
 			goto err;
+		}
 
 		spin_lock_irqsave(ap->lock, flags);
 		ap->pflags |= ATA_PFLAG_SCSI_HOTPLUG;
@@ -3494,6 +3507,8 @@ static void ata_eh_handle_port_suspend(struct ata_port *ap)
  */
 static void ata_eh_handle_port_resume(struct ata_port *ap)
 {
+	struct ata_link *link;
+	struct ata_device *dev;
 	unsigned long flags;
 	int rc = 0;
 
@@ -3508,6 +3523,17 @@ static void ata_eh_handle_port_resume(struct ata_port *ap)
 
 	WARN_ON(!(ap->pflags & ATA_PFLAG_SUSPENDED));
 
+	/*
+	 * Error timestamps are in jiffies which doesn't run while
+	 * suspended and PHY events during resume isn't too uncommon.
+	 * When the two are combined, it can lead to unnecessary speed
+	 * downs if the machine is suspended and resumed repeatedly.
+	 * Clear error history.
+	 */
+	ata_for_each_link(link, ap, HOST_FIRST)
+		ata_for_each_dev(dev, link, ALL)
+			ata_ering_clear(&dev->ering);
+
 	ata_acpi_set_state(ap, PMSG_ON);
 
 	if (ap->ops->port_resume)