summaryrefslogtreecommitdiffstats
path: root/arch/x86/kernel/e820.c
diff options
context:
space:
mode:
authorYinghai Lu <yinghai@kernel.org>2010-08-25 13:39:17 -0700
committerH. Peter Anvin <hpa@zytor.com>2010-08-27 11:12:29 -0700
commit72d7c3b33c980843e756681fb4867dc1efd62a76 (patch)
tree9607345d9fa055dd501aacf0772258fb72897035 /arch/x86/kernel/e820.c
parent301ff3e88ef9ff4bdb92f36a3e6170fce4c9dd34 (diff)
downloadtalos-op-linux-72d7c3b33c980843e756681fb4867dc1efd62a76.tar.gz
talos-op-linux-72d7c3b33c980843e756681fb4867dc1efd62a76.zip
x86: Use memblock to replace early_res
1. replace find_e820_area with memblock_find_in_range 2. replace reserve_early with memblock_x86_reserve_range 3. replace free_early with memblock_x86_free_range. 4. NO_BOOTMEM will switch to use memblock too. 5. use _e820, _early wrap in the patch, in following patch, will replace them all 6. because memblock_x86_free_range support partial free, we can remove some special care 7. Need to make sure that memblock_find_in_range() is called after memblock_x86_fill() so adjust some calling later in setup.c::setup_arch() -- corruption_check and mptable_update -v2: Move reserve_brk() early Before fill_memblock_area, to avoid overlap between brk and memblock_find_in_range() that could happen We have more then 128 RAM entry in E820 tables, and memblock_x86_fill() could use memblock_find_in_range() to find a new place for memblock.memory.region array. and We don't need to use extend_brk() after fill_memblock_area() So move reserve_brk() early before fill_memblock_area(). -v3: Move find_smp_config early To make sure memblock_find_in_range not find wrong place, if BIOS doesn't put mptable in right place. -v4: Treat RESERVED_KERN as RAM in memblock.memory. and they are already in memblock.reserved already.. use __NOT_KEEP_MEMBLOCK to make sure memblock related code could be freed later. -v5: Generic version __memblock_find_in_range() is going from high to low, and for 32bit active_region for 32bit does include high pages need to replace the limit with memblock.default_alloc_limit, aka get_max_mapped() -v6: Use current_limit instead -v7: check with MEMBLOCK_ERROR instead of -1ULL or -1L -v8: Set memblock_can_resize early to handle EFI with more RAM entries -v9: update after kmemleak changes in mainline Suggested-by: David S. Miller <davem@davemloft.net> Suggested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Diffstat (limited to 'arch/x86/kernel/e820.c')
-rw-r--r--arch/x86/kernel/e820.c159
1 files changed, 53 insertions, 106 deletions
diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
index 0d6fc71bedb1..a9221d18a5ed 100644
--- a/arch/x86/kernel/e820.c
+++ b/arch/x86/kernel/e820.c
@@ -15,6 +15,7 @@
#include <linux/pfn.h>
#include <linux/suspend.h>
#include <linux/firmware-map.h>
+#include <linux/memblock.h>
#include <asm/e820.h>
#include <asm/proto.h>
@@ -742,69 +743,29 @@ core_initcall(e820_mark_nvs_memory);
*/
u64 __init find_e820_area(u64 start, u64 end, u64 size, u64 align)
{
- int i;
-
- for (i = 0; i < e820.nr_map; i++) {
- struct e820entry *ei = &e820.map[i];
- u64 addr;
- u64 ei_start, ei_last;
+ u64 mem = memblock_find_in_range(start, end, size, align);
- if (ei->type != E820_RAM)
- continue;
-
- ei_last = ei->addr + ei->size;
- ei_start = ei->addr;
- addr = find_early_area(ei_start, ei_last, start, end,
- size, align);
-
- if (addr != -1ULL)
- return addr;
- }
- return -1ULL;
-}
+ if (mem == MEMBLOCK_ERROR)
+ return -1ULL;
-u64 __init find_fw_memmap_area(u64 start, u64 end, u64 size, u64 align)
-{
- return find_e820_area(start, end, size, align);
+ return mem;
}
-u64 __init get_max_mapped(void)
-{
- u64 end = max_pfn_mapped;
-
- end <<= PAGE_SHIFT;
-
- return end;
-}
/*
* Find next free range after *start
*/
u64 __init find_e820_area_size(u64 start, u64 *sizep, u64 align)
{
- int i;
+ u64 mem = memblock_x86_find_in_range_size(start, sizep, align);
- for (i = 0; i < e820.nr_map; i++) {
- struct e820entry *ei = &e820.map[i];
- u64 addr;
- u64 ei_start, ei_last;
-
- if (ei->type != E820_RAM)
- continue;
-
- ei_last = ei->addr + ei->size;
- ei_start = ei->addr;
- addr = find_early_area_size(ei_start, ei_last, start,
- sizep, align);
+ if (mem == MEMBLOCK_ERROR)
+ return -1ULL
- if (addr != -1ULL)
- return addr;
- }
-
- return -1ULL;
+ return mem;
}
/*
- * pre allocated 4k and reserved it in e820
+ * pre allocated 4k and reserved it in memblock and e820_saved
*/
u64 __init early_reserve_e820(u64 startt, u64 sizet, u64 align)
{
@@ -813,8 +774,8 @@ u64 __init early_reserve_e820(u64 startt, u64 sizet, u64 align)
u64 start;
for (start = startt; ; start += size) {
- start = find_e820_area_size(start, &size, align);
- if (!(start + 1))
+ start = memblock_x86_find_in_range_size(start, &size, align);
+ if (start == MEMBLOCK_ERROR)
return 0;
if (size >= sizet)
break;
@@ -830,10 +791,9 @@ u64 __init early_reserve_e820(u64 startt, u64 sizet, u64 align)
addr = round_down(start + size - sizet, align);
if (addr < start)
return 0;
- e820_update_range(addr, sizet, E820_RAM, E820_RESERVED);
+ memblock_x86_reserve_range(addr, addr + sizet, "new next");
e820_update_range_saved(addr, sizet, E820_RAM, E820_RESERVED);
- printk(KERN_INFO "update e820 for early_reserve_e820\n");
- update_e820();
+ printk(KERN_INFO "update e820_saved for early_reserve_e820\n");
update_e820_saved();
return addr;
@@ -895,52 +855,12 @@ unsigned long __init e820_end_of_low_ram_pfn(void)
{
return e820_end_pfn(1UL<<(32 - PAGE_SHIFT), E820_RAM);
}
-/*
- * Finds an active region in the address range from start_pfn to last_pfn and
- * returns its range in ei_startpfn and ei_endpfn for the e820 entry.
- */
-int __init e820_find_active_region(const struct e820entry *ei,
- unsigned long start_pfn,
- unsigned long last_pfn,
- unsigned long *ei_startpfn,
- unsigned long *ei_endpfn)
-{
- u64 align = PAGE_SIZE;
-
- *ei_startpfn = round_up(ei->addr, align) >> PAGE_SHIFT;
- *ei_endpfn = round_down(ei->addr + ei->size, align) >> PAGE_SHIFT;
-
- /* Skip map entries smaller than a page */
- if (*ei_startpfn >= *ei_endpfn)
- return 0;
-
- /* Skip if map is outside the node */
- if (ei->type != E820_RAM || *ei_endpfn <= start_pfn ||
- *ei_startpfn >= last_pfn)
- return 0;
-
- /* Check for overlaps */
- if (*ei_startpfn < start_pfn)
- *ei_startpfn = start_pfn;
- if (*ei_endpfn > last_pfn)
- *ei_endpfn = last_pfn;
-
- return 1;
-}
/* Walk the e820 map and register active regions within a node */
void __init e820_register_active_regions(int nid, unsigned long start_pfn,
unsigned long last_pfn)
{
- unsigned long ei_startpfn;
- unsigned long ei_endpfn;
- int i;
-
- for (i = 0; i < e820.nr_map; i++)
- if (e820_find_active_region(&e820.map[i],
- start_pfn, last_pfn,
- &ei_startpfn, &ei_endpfn))
- add_active_range(nid, ei_startpfn, ei_endpfn);
+ memblock_x86_register_active_regions(nid, start_pfn, last_pfn);
}
/*
@@ -950,18 +870,16 @@ void __init e820_register_active_regions(int nid, unsigned long start_pfn,
*/
u64 __init e820_hole_size(u64 start, u64 end)
{
- unsigned long start_pfn = start >> PAGE_SHIFT;
- unsigned long last_pfn = end >> PAGE_SHIFT;
- unsigned long ei_startpfn, ei_endpfn, ram = 0;
- int i;
+ return memblock_x86_hole_size(start, end);
+}
- for (i = 0; i < e820.nr_map; i++) {
- if (e820_find_active_region(&e820.map[i],
- start_pfn, last_pfn,
- &ei_startpfn, &ei_endpfn))
- ram += ei_endpfn - ei_startpfn;
- }
- return end - start - ((u64)ram << PAGE_SHIFT);
+void reserve_early(u64 start, u64 end, char *name)
+{
+ memblock_x86_reserve_range(start, end, name);
+}
+void free_early(u64 start, u64 end)
+{
+ memblock_x86_free_range(start, end);
}
static void early_panic(char *msg)
@@ -1210,3 +1128,32 @@ void __init setup_memory_map(void)
printk(KERN_INFO "BIOS-provided physical RAM map:\n");
e820_print_map(who);
}
+
+void __init memblock_x86_fill(void)
+{
+ int i;
+ u64 end;
+
+ /*
+ * EFI may have more than 128 entries
+ * We are safe to enable resizing, beause memblock_x86_fill()
+ * is rather later for x86
+ */
+ memblock_can_resize = 1;
+
+ for (i = 0; i < e820.nr_map; i++) {
+ struct e820entry *ei = &e820.map[i];
+
+ end = ei->addr + ei->size;
+ if (end != (resource_size_t)end)
+ continue;
+
+ if (ei->type != E820_RAM && ei->type != E820_RESERVED_KERN)
+ continue;
+
+ memblock_add(ei->addr, ei->size);
+ }
+
+ memblock_analyze();
+ memblock_dump_all();
+}
OpenPOWER on IntegriCloud