uml: network interface hotplug error handling

This fixes a number of problems associated with network interface hotplug.

The userspace initialization function can fail in some cases, but the
failure was never passed back to eth_configure, which proceeded with the
configuration.  This results in a zombie device that is present, but can't
work.  This is fixed by allowing the initialization routines to return an
error, which is checked, and the configuration aborted on failure.

eth_configure failed to check for many failures.  Even when it did check,
it didn't undo whatever initializations has already happened, so a present,
but partially initialized and non-working device could result.  It now
checks everything that can fail, and bails out, undoing whatever had been
done.

The return value of eth_configure was always ignored, so it is now just
void.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

6 files changed, 59 insertions, 41 deletions

diff --git a/arch/um/drivers/daemon_user.c b/arch/um/drivers/daemon_user.c
index 09d1de90297c..d0b656a517d3 100644
--- a/arch/um/drivers/daemon_user.c
+++ b/arch/um/drivers/daemon_user.c
@@ -123,7 +123,7 @@ static int connect_to_switch(struct daemon_data *pri)
 	return err;
 }
 
-static void daemon_user_init(void *data, void *dev)
+static int daemon_user_init(void *data, void *dev)
 {
 	struct daemon_data *pri = data;
 	struct timeval tv;
@@ -146,7 +146,10 @@ static void daemon_user_init(void *data, void *dev)
 	if(pri->fd < 0){
 		kfree(pri->local_addr);
 		pri->local_addr = NULL;
+		return pri->fd;
 	}
+
+	return 0;
 }
 
 static int daemon_open(void *data)
diff --git a/arch/um/drivers/mcast_user.c b/arch/um/drivers/mcast_user.c
index cfaa2cc43139..0f64d9467286 100644
--- a/arch/um/drivers/mcast_user.c
+++ b/arch/um/drivers/mcast_user.c
@@ -42,12 +42,13 @@ static struct sockaddr_in *new_addr(char *addr, unsigned short port)
 	return sin;
 }
 
-static void mcast_user_init(void *data, void *dev)
+static int mcast_user_init(void *data, void *dev)
 {
 	struct mcast_data *pri = data;
 
 	pri->mcast_addr = new_addr(pri->addr, pri->port);
 	pri->dev = dev;
+	return 0;
 }
 
 static void mcast_remove(void *data)
diff --git a/arch/um/drivers/net_kern.c b/arch/um/drivers/net_kern.c
index 859303730b2f..ac746fb5d10f 100644
--- a/arch/um/drivers/net_kern.c
+++ b/arch/um/drivers/net_kern.c
@@ -325,8 +325,8 @@ static struct platform_driver uml_net_driver = {
 };
 static int driver_registered;
 
-static int eth_configure(int n, void *init, char *mac,
-			 struct transport *transport)
+static void eth_configure(int n, void *init, char *mac,
+			  struct transport *transport)
 {
 	struct uml_net *device;
 	struct net_device *dev;
@@ -339,16 +339,12 @@ static int eth_configure(int n, void *init, char *mac,
 	device = kzalloc(sizeof(*device), GFP_KERNEL);
 	if (device == NULL) {
 		printk(KERN_ERR "eth_configure failed to allocate uml_net\n");
-		return(1);
+		return;
 	}
 
 	INIT_LIST_HEAD(&device->list);
 	device->index = n;
 
-	spin_lock(&devices_lock);
-	list_add(&device->list, &devices);
-	spin_unlock(&devices_lock);
-
 	setup_etheraddr(mac, device->mac);
 
 	printk(KERN_INFO "Netdevice %d ", n);
@@ -360,7 +356,7 @@ static int eth_configure(int n, void *init, char *mac,
 	dev = alloc_etherdev(size);
 	if (dev == NULL) {
 		printk(KERN_ERR "eth_configure: failed to allocate device\n");
-		return 1;
+		goto out_free_device;
 	}
 
 	lp = dev->priv;
@@ -376,7 +372,8 @@ static int eth_configure(int n, void *init, char *mac,
 	}
 	device->pdev.id = n;
 	device->pdev.name = DRIVER_NAME;
-	platform_device_register(&device->pdev);
+	if(platform_device_register(&device->pdev))
+		goto out_free_netdev;
 	SET_NETDEV_DEV(dev,&device->pdev.dev);
 
 	/* If this name ends up conflicting with an existing registered
@@ -386,31 +383,12 @@ static int eth_configure(int n, void *init, char *mac,
 	snprintf(dev->name, sizeof(dev->name), "eth%d", n);
 	device->dev = dev;
 
+	/*
+	 * These just fill in a data structure, so there's no failure
+	 * to be worried about.
+	 */
 	(*transport->kern->init)(dev, init);
 
-	dev->mtu = transport->user->max_packet;
-	dev->open = uml_net_open;
-	dev->hard_start_xmit = uml_net_start_xmit;
-	dev->stop = uml_net_close;
-	dev->get_stats = uml_net_get_stats;
-	dev->set_multicast_list = uml_net_set_multicast_list;
-	dev->tx_timeout = uml_net_tx_timeout;
-	dev->set_mac_address = uml_net_set_mac;
-	dev->change_mtu = uml_net_change_mtu;
-	dev->ethtool_ops = &uml_net_ethtool_ops;
-	dev->watchdog_timeo = (HZ >> 1);
-	dev->irq = UM_ETH_IRQ;
-
-	rtnl_lock();
-	err = register_netdevice(dev);
-	rtnl_unlock();
-	if (err) {
-		device->dev = NULL;
-		/* XXX: should we call ->remove() here? */
-		free_netdev(dev);
-		return 1;
-	}
-
 	/* lp.user is the first four bytes of the transport data, which
 	 * has already been initialized.  This structure assignment will
 	 * overwrite that, so we make sure that .user gets overwritten with
@@ -438,12 +416,45 @@ static int eth_configure(int n, void *init, char *mac,
 	lp->tl.function = uml_net_user_timer_expire;
 	memcpy(lp->mac, device->mac, sizeof(lp->mac));
 
-	if (transport->user->init)
-		(*transport->user->init)(&lp->user, dev);
+	if ((transport->user->init != NULL) &&
+	    ((*transport->user->init)(&lp->user, dev) != 0))
+		goto out_unregister;
 
 	set_ether_mac(dev, device->mac);
+	dev->mtu = transport->user->max_packet;
+	dev->open = uml_net_open;
+	dev->hard_start_xmit = uml_net_start_xmit;
+	dev->stop = uml_net_close;
+	dev->get_stats = uml_net_get_stats;
+	dev->set_multicast_list = uml_net_set_multicast_list;
+	dev->tx_timeout = uml_net_tx_timeout;
+	dev->set_mac_address = uml_net_set_mac;
+	dev->change_mtu = uml_net_change_mtu;
+	dev->ethtool_ops = &uml_net_ethtool_ops;
+	dev->watchdog_timeo = (HZ >> 1);
+	dev->irq = UM_ETH_IRQ;
 
-	return 0;
+	rtnl_lock();
+	err = register_netdevice(dev);
+	rtnl_unlock();
+	if (err)
+		goto out_undo_user_init;
+
+	spin_lock(&devices_lock);
+	list_add(&device->list, &devices);
+	spin_unlock(&devices_lock);
+
+	return;
+
+out_undo_user_init:
+	if (transport->user->init != NULL)
+		(*transport->user->remove)(&lp->user);
+out_unregister:
+	platform_device_unregister(&device->pdev);
+out_free_netdev:
+	free_netdev(dev);
+out_free_device: ;
+	kfree(device);
 }
 
 static struct uml_net *find_device(int n)
diff --git a/arch/um/drivers/pcap_user.c b/arch/um/drivers/pcap_user.c
index a1747dc0ff6f..dc0a903ef9a6 100644
--- a/arch/um/drivers/pcap_user.c
+++ b/arch/um/drivers/pcap_user.c
@@ -18,7 +18,7 @@
 
 #define PCAP_FD(p) (*(int *)(p))
 
-static void pcap_user_init(void *data, void *dev)
+static int pcap_user_init(void *data, void *dev)
 {
 	struct pcap_data *pri = data;
 	pcap_t *p;
@@ -28,11 +28,12 @@ static void pcap_user_init(void *data, void *dev)
 	if(p == NULL){
 		printk("pcap_user_init : pcap_open_live failed - '%s'\n", 
 		       errors);
-		return;
+		return -EINVAL;
 	}
 
 	pri->dev = dev;
 	pri->pcap = p;
+	return 0;
 }
 
 static int pcap_open(void *data)
diff --git a/arch/um/drivers/slip_user.c b/arch/um/drivers/slip_user.c
index 7eddacc53b6e..329c072d17d1 100644
--- a/arch/um/drivers/slip_user.c
+++ b/arch/um/drivers/slip_user.c
@@ -17,11 +17,12 @@
 #include "os.h"
 #include "um_malloc.h"
 
-void slip_user_init(void *data, void *dev)
+static int slip_user_init(void *data, void *dev)
 {
 	struct slip_data *pri = data;
 
 	pri->dev = dev;
+	return 0;
 }
 
 static int set_up_tty(int fd)
diff --git a/arch/um/drivers/slirp_user.c b/arch/um/drivers/slirp_user.c
index ce5e85d1de3d..f0a40abc8abf 100644
--- a/arch/um/drivers/slirp_user.c
+++ b/arch/um/drivers/slirp_user.c
@@ -15,11 +15,12 @@
 #include "slip_common.h"
 #include "os.h"
 
-void slirp_user_init(void *data, void *dev)
+static int slirp_user_init(void *data, void *dev)
 {
 	struct slirp_data *pri = data;
 
 	pri->dev = dev;
+	return 0;
 }
 
 struct slirp_pre_exec_data {