Merge commit 'linus/master' into tracing/kprobes

Conflicts:
	kernel/trace/Makefile
	kernel/trace/trace.h
	kernel/trace/trace_event_types.h
	kernel/trace/trace_export.c

Merge reason:
	Sync with latest significant tracing core changes.

13 files changed, 1618 insertions, 28 deletions

diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig
index 2b1af0eefa6a..aedd9deb5de2 100644
--- a/arch/sh/boards/Kconfig
+++ b/arch/sh/boards/Kconfig
@@ -160,7 +160,6 @@ config SH_SH7785LCR
 	bool "SH7785LCR"
 	depends on CPU_SUBTYPE_SH7785
 	select SYS_SUPPORTS_PCI
-	select IO_TRAPPED if MMU
 
 config SH_SH7785LCR_29BIT_PHYSMAPS
 	bool "SH7785LCR 29bit physmaps"
@@ -171,6 +170,13 @@ config SH_SH7785LCR_29BIT_PHYSMAPS
 	  DIP switch(S2-5). If you set the DIP switch for S2-5 = ON,
 	  you can access all on-board device in 29bit address mode.
 
+config SH_SH7785LCR_PT
+	bool "SH7785LCR prototype board on 32-bit MMU mode"
+	depends on SH_SH7785LCR && 32BIT
+	default n
+	help
+	  If you use prototype board, this option is enabled.
+
 config SH_URQUELL
 	bool "Urquell"
 	depends on CPU_SUBTYPE_SH7786
@@ -193,6 +199,20 @@ config SH_AP325RXA
 	  Renesas "AP-325RXA" support.
 	  Compatible with ALGO SYSTEM CO.,LTD. "AP-320A"
 
+config SH_KFR2R09
+	bool "KFR2R09"
+	depends on CPU_SUBTYPE_SH7724
+	select ARCH_REQUIRE_GPIOLIB
+	help
+	  "Kit For R2R for 2009" support.
+
+config SH_ECOVEC
+	bool "EcoVec"
+	depends on CPU_SUBTYPE_SH7724
+	select ARCH_REQUIRE_GPIOLIB
+	help
+	  Renesas "R0P7724LC0011/21RL (EcoVec)" support.
+
 config SH_SH7763RDP
 	bool "SH7763RDP"
 	depends on CPU_SUBTYPE_SH7763
diff --git a/arch/sh/boards/board-ap325rxa.c b/arch/sh/boards/board-ap325rxa.c
index b9c88cc519e2..2d080732a964 100644
--- a/arch/sh/boards/board-ap325rxa.c
+++ b/arch/sh/boards/board-ap325rxa.c
@@ -188,7 +188,7 @@ static struct sh_mobile_lcdc_info lcdc_info = {
 			.name = "LB070WV1",
 			.xres = 800,
 			.yres = 480,
-			.left_margin = 40,
+			.left_margin = 32,
 			.right_margin = 160,
 			.hsync_len = 8,
 			.upper_margin = 63,
@@ -211,7 +211,7 @@ static struct resource lcdc_resources[] = {
 	[0] = {
 		.name	= "LCDC",
 		.start	= 0xfe940000, /* P4-only space */
-		.end	= 0xfe941fff,
+		.end	= 0xfe942fff,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -227,6 +227,9 @@ static struct platform_device lcdc_device = {
 	.dev		= {
 		.platform_data	= &lcdc_info,
 	},
+	.archdata = {
+		.hwblk_id = HWBLK_LCDC,
+	},
 };
 
 static void camera_power(int val)
@@ -307,8 +310,10 @@ static int camera_set_capture(struct soc_camera_platform_info *info,
 	return ret;
 }
 
+static int ap325rxa_camera_add(struct soc_camera_link *icl, struct device *dev);
+static void ap325rxa_camera_del(struct soc_camera_link *icl);
+
 static struct soc_camera_platform_info camera_info = {
-	.iface = 0,
 	.format_name = "UYVY",
 	.format_depth = 16,
 	.format = {
@@ -320,24 +325,46 @@ static struct soc_camera_platform_info camera_info = {
 	.bus_param = SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH |
 	SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8,
 	.set_capture = camera_set_capture,
+	.link = {
+		.bus_id		= 0,
+		.add_device	= ap325rxa_camera_add,
+		.del_device	= ap325rxa_camera_del,
+		.module_name	= "soc_camera_platform",
+	},
 };
 
+static void dummy_release(struct device *dev)
+{
+}
+
 static struct platform_device camera_device = {
 	.name		= "soc_camera_platform",
 	.dev		= {
 		.platform_data	= &camera_info,
+		.release	= dummy_release,
 	},
 };
 
-static int __init camera_setup(void)
+static int ap325rxa_camera_add(struct soc_camera_link *icl,
+			       struct device *dev)
 {
-	if (camera_probe() > 0)
-		platform_device_register(&camera_device);
+	if (icl != &camera_info.link || camera_probe() <= 0)
+		return -ENODEV;
 
-	return 0;
+	camera_info.dev = dev;
+
+	return platform_device_register(&camera_device);
 }
-late_initcall(camera_setup);
 
+static void ap325rxa_camera_del(struct soc_camera_link *icl)
+{
+	if (icl != &camera_info.link)
+		return;
+
+	platform_device_unregister(&camera_device);
+	memset(&camera_device.dev.kobj, 0,
+	       sizeof(camera_device.dev.kobj));
+}
 #endif /* CONFIG_I2C */
 
 static int ov7725_power(struct device *dev, int mode)
@@ -377,6 +404,9 @@ static struct platform_device ceu_device = {
 	.dev		= {
 		.platform_data	= &sh_mobile_ceu_info,
 	},
+	.archdata = {
+		.hwblk_id = HWBLK_CEU,
+	},
 };
 
 struct spi_gpio_platform_data sdcard_cn3_platform_data = {
@@ -410,6 +440,7 @@ static struct ov772x_camera_info ov7725_info = {
 	.flags		= OV772X_FLAG_VFLIP | OV772X_FLAG_HFLIP,
 	.edgectrl	= OV772X_AUTO_EDGECTRL(0xf, 0),
 	.link = {
+		.bus_id		= 0,
 		.power		= ov7725_power,
 		.board_info	= &ap325rxa_i2c_camera[0],
 		.i2c_adapter_id	= 0,
@@ -417,11 +448,19 @@ static struct ov772x_camera_info ov7725_info = {
 	},
 };
 
-static struct platform_device ap325rxa_camera = {
-	.name	= "soc-camera-pdrv",
-	.id	= 0,
-	.dev	= {
-		.platform_data = &ov7725_info.link,
+static struct platform_device ap325rxa_camera[] = {
+	{
+		.name	= "soc-camera-pdrv",
+		.id	= 0,
+		.dev	= {
+			.platform_data = &ov7725_info.link,
+		},
+	}, {
+		.name	= "soc-camera-pdrv",
+		.id	= 1,
+		.dev	= {
+			.platform_data = &camera_info.link,
+		},
 	},
 };
 
@@ -432,7 +471,8 @@ static struct platform_device *ap325rxa_devices[] __initdata = {
 	&ceu_device,
 	&nand_flash_device,
 	&sdcard_cn3_device,
-	&ap325rxa_camera,
+	&ap325rxa_camera[0],
+	&ap325rxa_camera[1],
 };
 
 static struct spi_board_info ap325rxa_spi_devices[] = {
diff --git a/arch/sh/boards/board-sh7785lcr.c b/arch/sh/boards/board-sh7785lcr.c
index 42410a15d255..e5a8a2fde39c 100644
--- a/arch/sh/boards/board-sh7785lcr.c
+++ b/arch/sh/boards/board-sh7785lcr.c
@@ -223,6 +223,19 @@ static struct platform_device sm501_device = {
 	.resource	= sm501_resources,
 };
 
+static struct resource i2c_proto_resources[] = {
+	[0] = {
+		.start	= PCA9564_PROTO_32BIT_ADDR,
+		.end	= PCA9564_PROTO_32BIT_ADDR + PCA9564_SIZE - 1,
+		.flags	= IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
+	},
+	[1] = {
+		.start	= 12,
+		.end	= 12,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
 static struct resource i2c_resources[] = {
 	[0] = {
 		.start	= PCA9564_ADDR,
@@ -271,6 +284,11 @@ static int __init sh7785lcr_devices_setup(void)
 	i2c_register_board_info(0, sh7785lcr_i2c_devices,
 				ARRAY_SIZE(sh7785lcr_i2c_devices));
 
+	if (mach_is_sh7785lcr_pt()) {
+		i2c_device.resource = i2c_proto_resources;
+		i2c_device.num_resources = ARRAY_SIZE(i2c_proto_resources);
+	}
+
 	return platform_add_devices(sh7785lcr_devices,
 				    ARRAY_SIZE(sh7785lcr_devices));
 }
diff --git a/arch/sh/boards/mach-ecovec24/Makefile b/arch/sh/boards/mach-ecovec24/Makefile
new file mode 100644
index 000000000000..51f852151655
--- /dev/null
+++ b/arch/sh/boards/mach-ecovec24/Makefile
@@ -0,0 +1,9 @@
+#
+# Makefile for the R0P7724LC0011/21RL (EcoVec)
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+
+obj-y	 := setup.o
\ No newline at end of file
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
new file mode 100644
index 000000000000..96bc1698310f
--- /dev/null
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -0,0 +1,670 @@
+/*
+ * Copyright (C) 2009 Renesas Solutions Corp.
+ *
+ * Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/usb/r8a66597.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <video/sh_mobile_lcdc.h>
+#include <media/sh_mobile_ceu.h>
+#include <asm/heartbeat.h>
+#include <asm/sh_eth.h>
+#include <asm/sh_keysc.h>
+#include <asm/clock.h>
+#include <cpu/sh7724.h>
+
+/*
+ *  Address      Interface        BusWidth
+ *-----------------------------------------
+ *  0x0000_0000  uboot            16bit
+ *  0x0004_0000  Linux romImage   16bit
+ *  0x0014_0000  MTD for Linux    16bit
+ *  0x0400_0000  Internal I/O     16/32bit
+ *  0x0800_0000  DRAM             32bit
+ *  0x1800_0000  MFI              16bit
+ */
+
+/* Heartbeat */
+static unsigned char led_pos[] = { 0, 1, 2, 3 };
+static struct heartbeat_data heartbeat_data = {
+	.regsize = 8,
+	.nr_bits = 4,
+	.bit_pos = led_pos,
+};
+
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start  = 0xA405012C, /* PTG */
+		.end    = 0xA405012E - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device heartbeat_device = {
+	.name           = "heartbeat",
+	.id             = -1,
+	.dev = {
+		.platform_data = &heartbeat_data,
+	},
+	.num_resources  = ARRAY_SIZE(heartbeat_resources),
+	.resource       = heartbeat_resources,
+};
+
+/* MTD */
+static struct mtd_partition nor_flash_partitions[] = {
+	{
+		.name = "boot loader",
+		.offset = 0,
+		.size = (5 * 1024 * 1024),
+		.mask_flags = MTD_CAP_ROM,
+	}, {
+		.name = "free-area",
+		.offset = MTDPART_OFS_APPEND,
+		.size = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data nor_flash_data = {
+	.width		= 2,
+	.parts		= nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(nor_flash_partitions),
+};
+
+static struct resource nor_flash_resources[] = {
+	[0] = {
+		.name	= "NOR Flash",
+		.start	= 0x00000000,
+		.end	= 0x03ffffff,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device nor_flash_device = {
+	.name		= "physmap-flash",
+	.resource	= nor_flash_resources,
+	.num_resources	= ARRAY_SIZE(nor_flash_resources),
+	.dev		= {
+		.platform_data = &nor_flash_data,
+	},
+};
+
+/* SH Eth */
+#define SH_ETH_ADDR	(0xA4600000)
+#define SH_ETH_MAHR	(SH_ETH_ADDR + 0x1C0)
+#define SH_ETH_MALR	(SH_ETH_ADDR + 0x1C8)
+static struct resource sh_eth_resources[] = {
+	[0] = {
+		.start = SH_ETH_ADDR,
+		.end   = SH_ETH_ADDR + 0x1FC,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = 91,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+struct sh_eth_plat_data sh_eth_plat = {
+	.phy = 0x1f, /* SMSC LAN8700 */
+	.edmac_endian = EDMAC_LITTLE_ENDIAN,
+};
+
+static struct platform_device sh_eth_device = {
+	.name = "sh-eth",
+	.id	= 0,
+	.dev = {
+		.platform_data = &sh_eth_plat,
+	},
+	.num_resources = ARRAY_SIZE(sh_eth_resources),
+	.resource = sh_eth_resources,
+};
+
+/* USB0 host */
+void usb0_port_power(int port, int power)
+{
+	gpio_set_value(GPIO_PTB4, power);
+}
+
+static struct r8a66597_platdata usb0_host_data = {
+	.on_chip = 1,
+	.port_power = usb0_port_power,
+};
+
+static struct resource usb0_host_resources[] = {
+	[0] = {
+		.start	= 0xa4d80000,
+		.end	= 0xa4d80124 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 65,
+		.end	= 65,
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
+	},
+};
+
+static struct platform_device usb0_host_device = {
+	.name		= "r8a66597_hcd",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= NULL,         /*  not use dma */
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &usb0_host_data,
+	},
+	.num_resources	= ARRAY_SIZE(usb0_host_resources),
+	.resource	= usb0_host_resources,
+};
+
+/*
+ * USB1
+ *
+ * CN5 can use both host/function,
+ * and we can determine it by checking PTB[3]
+ *
+ * This time only USB1 host is supported.
+ */
+void usb1_port_power(int port, int power)
+{
+	if (!gpio_get_value(GPIO_PTB3)) {
+		printk(KERN_ERR "USB1 function is not supported\n");
+		return;
+	}
+
+	gpio_set_value(GPIO_PTB5, power);
+}
+
+static struct r8a66597_platdata usb1_host_data = {
+	.on_chip = 1,
+	.port_power = usb1_port_power,
+};
+
+static struct resource usb1_host_resources[] = {
+	[0] = {
+		.start	= 0xa4d90000,
+		.end	= 0xa4d90124 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 66,
+		.end	= 66,
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
+	},
+};
+
+static struct platform_device usb1_host_device = {
+	.name		= "r8a66597_hcd",
+	.id		= 1,
+	.dev = {
+		.dma_mask		= NULL,         /*  not use dma */
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &usb1_host_data,
+	},
+	.num_resources	= ARRAY_SIZE(usb1_host_resources),
+	.resource	= usb1_host_resources,
+};
+
+/* LCDC */
+static struct sh_mobile_lcdc_info lcdc_info = {
+	.ch[0] = {
+		.interface_type = RGB18,
+		.chan = LCDC_CHAN_MAINLCD,
+		.bpp = 16,
+		.lcd_cfg = {
+			.sync = 0, /* hsync and vsync are active low */
+		},
+		.lcd_size_cfg = { /* 7.0 inch */
+			.width = 152,
+			.height = 91,
+		},
+		.board_cfg = {
+		},
+	}
+};
+
+static struct resource lcdc_resources[] = {
+	[0] = {
+		.name	= "LCDC",
+		.start	= 0xfe940000,
+		.end	= 0xfe942fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 106,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device lcdc_device = {
+	.name		= "sh_mobile_lcdc_fb",
+	.num_resources	= ARRAY_SIZE(lcdc_resources),
+	.resource	= lcdc_resources,
+	.dev		= {
+		.platform_data	= &lcdc_info,
+	},
+	.archdata = {
+		.hwblk_id = HWBLK_LCDC,
+	},
+};
+
+/* CEU0 */
+static struct sh_mobile_ceu_info sh_mobile_ceu0_info = {
+	.flags = SH_CEU_FLAG_USE_8BIT_BUS,
+};
+
+static struct resource ceu0_resources[] = {
+	[0] = {
+		.name	= "CEU0",
+		.start	= 0xfe910000,
+		.end	= 0xfe91009f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 52,
+		.flags  = IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device ceu0_device = {
+	.name		= "sh_mobile_ceu",
+	.id             = 0, /* "ceu0" clock */
+	.num_resources	= ARRAY_SIZE(ceu0_resources),
+	.resource	= ceu0_resources,
+	.dev	= {
+		.platform_data	= &sh_mobile_ceu0_info,
+	},
+	.archdata = {
+		.hwblk_id = HWBLK_CEU0,
+	},
+};
+
+/* CEU1 */
+static struct sh_mobile_ceu_info sh_mobile_ceu1_info = {
+	.flags = SH_CEU_FLAG_USE_8BIT_BUS,
+};
+
+static struct resource ceu1_resources[] = {
+	[0] = {
+		.name	= "CEU1",
+		.start	= 0xfe914000,
+		.end	= 0xfe91409f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 63,
+		.flags  = IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device ceu1_device = {
+	.name		= "sh_mobile_ceu",
+	.id             = 1, /* "ceu1" clock */
+	.num_resources	= ARRAY_SIZE(ceu1_resources),
+	.resource	= ceu1_resources,
+	.dev	= {
+		.platform_data	= &sh_mobile_ceu1_info,
+	},
+	.archdata = {
+		.hwblk_id = HWBLK_CEU1,
+	},
+};
+
+/* I2C device */
+static struct i2c_board_info i2c1_devices[] = {
+	{
+		I2C_BOARD_INFO("r2025sd", 0x32),
+	},
+};
+
+/* KEYSC */
+static struct sh_keysc_info keysc_info = {
+	.mode		= SH_KEYSC_MODE_1,
+	.scan_timing	= 3,
+	.delay		= 50,
+	.kycr2_delay	= 100,
+	.keycodes	= { KEY_1, 0, 0, 0, 0,
+			    KEY_2, 0, 0, 0, 0,
+			    KEY_3, 0, 0, 0, 0,
+			    KEY_4, 0, 0, 0, 0,
+			    KEY_5, 0, 0, 0, 0,
+			    KEY_6, 0, 0, 0, 0, },
+};
+
+static struct resource keysc_resources[] = {
+	[0] = {
+		.name	= "KEYSC",
+		.start  = 0x044b0000,
+		.end    = 0x044b000f,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 79,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device keysc_device = {
+	.name           = "sh_keysc",
+	.id             = 0, /* keysc0 clock */
+	.num_resources  = ARRAY_SIZE(keysc_resources),
+	.resource       = keysc_resources,
+	.dev	= {
+		.platform_data	= &keysc_info,
+	},
+	.archdata = {
+		.hwblk_id = HWBLK_KEYSC,
+	},
+};
+
+static struct platform_device *ecovec_devices[] __initdata = {
+	&heartbeat_device,
+	&nor_flash_device,
+	&sh_eth_device,
+	&usb0_host_device,
+	&usb1_host_device, /* USB1 host support */
+	&lcdc_device,
+	&ceu0_device,
+	&ceu1_device,
+	&keysc_device,
+};
+
+#define EEPROM_ADDR 0x50
+static u8 mac_read(struct i2c_adapter *a, u8 command)
+{
+	struct i2c_msg msg[2];
+	u8 buf;
+	int ret;
+
+	msg[0].addr  = EEPROM_ADDR;
+	msg[0].flags = 0;
+	msg[0].len   = 1;
+	msg[0].buf   = &command;
+
+	msg[1].addr  = EEPROM_ADDR;
+	msg[1].flags = I2C_M_RD;
+	msg[1].len   = 1;
+	msg[1].buf   = &buf;
+
+	ret = i2c_transfer(a, msg, 2);
+	if (ret < 0) {
+		printk(KERN_ERR "error %d\n", ret);
+		buf = 0xff;
+	}
+
+	return buf;
+}
+
+#define MAC_LEN 6
+static void __init sh_eth_init(void)
+{
+	struct i2c_adapter *a = i2c_get_adapter(1);
+	struct clk *eth_clk;
+	u8 mac[MAC_LEN];
+	int i;
+
+	if (!a) {
+		pr_err("can not get I2C 1\n");
+		return;
+	}
+
+	eth_clk = clk_get(NULL, "eth0");
+	if (!eth_clk) {
+		pr_err("can not get eth0 clk\n");
+		return;
+	}
+
+	/* read MAC address frome EEPROM */
+	for (i = 0; i < MAC_LEN; i++) {
+		mac[i] = mac_read(a, 0x10 + i);
+		msleep(10);
+	}
+
+	/* clock enable */
+	clk_enable(eth_clk);
+
+	/* reset sh-eth */
+	ctrl_outl(0x1, SH_ETH_ADDR + 0x0);
+
+	/* set MAC addr */
+	ctrl_outl((mac[0] << 24) |
+		  (mac[1] << 16) |
+		  (mac[2] <<  8) |
+		  (mac[3] <<  0), SH_ETH_MAHR);
+	ctrl_outl((mac[4] <<  8) |
+		  (mac[5] <<  0), SH_ETH_MALR);
+
+	clk_put(eth_clk);
+}
+
+#define PORT_HIZA 0xA4050158
+#define IODRIVEA  0xA405018A
+static int __init arch_setup(void)
+{
+	/* enable SCIFA0 */
+	gpio_request(GPIO_FN_SCIF0_TXD, NULL);
+	gpio_request(GPIO_FN_SCIF0_RXD, NULL);
+
+	/* enable debug LED */
+	gpio_request(GPIO_PTG0, NULL);
+	gpio_request(GPIO_PTG1, NULL);
+	gpio_request(GPIO_PTG2, NULL);
+	gpio_request(GPIO_PTG3, NULL);
+	gpio_direction_output(GPIO_PTG0, 0);
+	gpio_direction_output(GPIO_PTG1, 0);
+	gpio_direction_output(GPIO_PTG2, 0);
+	gpio_direction_output(GPIO_PTG3, 0);
+	ctrl_outw((ctrl_inw(PORT_HIZA) & ~(0x1 << 1)) , PORT_HIZA);
+
+	/* enable SH-Eth */
+	gpio_request(GPIO_PTA1, NULL);
+	gpio_direction_output(GPIO_PTA1, 1);
+	mdelay(20);
+
+	gpio_request(GPIO_FN_RMII_RXD0,    NULL);
+	gpio_request(GPIO_FN_RMII_RXD1,    NULL);
+	gpio_request(GPIO_FN_RMII_TXD0,    NULL);
+	gpio_request(GPIO_FN_RMII_TXD1,    NULL);
+	gpio_request(GPIO_FN_RMII_REF_CLK, NULL);
+	gpio_request(GPIO_FN_RMII_TX_EN,   NULL);
+	gpio_request(GPIO_FN_RMII_RX_ER,   NULL);
+	gpio_request(GPIO_FN_RMII_CRS_DV,  NULL);
+	gpio_request(GPIO_FN_MDIO,         NULL);
+	gpio_request(GPIO_FN_MDC,          NULL);
+	gpio_request(GPIO_FN_LNKSTA,       NULL);
+
+	/* enable USB */
+	ctrl_outw(0x0000, 0xA4D80000);
+	ctrl_outw(0x0000, 0xA4D90000);
+	gpio_request(GPIO_PTB3,  NULL);
+	gpio_request(GPIO_PTB4,  NULL);
+	gpio_request(GPIO_PTB5,  NULL);
+	gpio_direction_input(GPIO_PTB3);
+	gpio_direction_output(GPIO_PTB4, 0);
+	gpio_direction_output(GPIO_PTB5, 0);
+	ctrl_outw(0x0600, 0xa40501d4);
+	ctrl_outw(0x0600, 0xa4050192);
+
+	/* enable LCDC */
+	gpio_request(GPIO_FN_LCDD23,   NULL);
+	gpio_request(GPIO_FN_LCDD22,   NULL);
+	gpio_request(GPIO_FN_LCDD21,   NULL);
+	gpio_request(GPIO_FN_LCDD20,   NULL);
+	gpio_request(GPIO_FN_LCDD19,   NULL);
+	gpio_request(GPIO_FN_LCDD18,   NULL);
+	gpio_request(GPIO_FN_LCDD17,   NULL);
+	gpio_request(GPIO_FN_LCDD16,   NULL);
+	gpio_request(GPIO_FN_LCDD15,   NULL);
+	gpio_request(GPIO_FN_LCDD14,   NULL);
+	gpio_request(GPIO_FN_LCDD13,   NULL);
+	gpio_request(GPIO_FN_LCDD12,   NULL);
+	gpio_request(GPIO_FN_LCDD11,   NULL);
+	gpio_request(GPIO_FN_LCDD10,   NULL);
+	gpio_request(GPIO_FN_LCDD9,    NULL);
+	gpio_request(GPIO_FN_LCDD8,    NULL);
+	gpio_request(GPIO_FN_LCDD7,    NULL);
+	gpio_request(GPIO_FN_LCDD6,    NULL);
+	gpio_request(GPIO_FN_LCDD5,    NULL);
+	gpio_request(GPIO_FN_LCDD4,    NULL);
+	gpio_request(GPIO_FN_LCDD3,    NULL);
+	gpio_request(GPIO_FN_LCDD2,    NULL);
+	gpio_request(GPIO_FN_LCDD1,    NULL);
+	gpio_request(GPIO_FN_LCDD0,    NULL);
+	gpio_request(GPIO_FN_LCDDISP,  NULL);
+	gpio_request(GPIO_FN_LCDHSYN,  NULL);
+	gpio_request(GPIO_FN_LCDDCK,   NULL);
+	gpio_request(GPIO_FN_LCDVSYN,  NULL);
+	gpio_request(GPIO_FN_LCDDON,   NULL);
+	gpio_request(GPIO_FN_LCDLCLK,  NULL);
+	ctrl_outw((ctrl_inw(PORT_HIZA) & ~0x0001), PORT_HIZA);
+
+	gpio_request(GPIO_PTE6, NULL);
+	gpio_request(GPIO_PTU1, NULL);
+	gpio_request(GPIO_PTR1, NULL);
+	gpio_request(GPIO_PTA2, NULL);
+	gpio_direction_input(GPIO_PTE6);
+	gpio_direction_output(GPIO_PTU1, 0);
+	gpio_direction_output(GPIO_PTR1, 0);
+	gpio_direction_output(GPIO_PTA2, 0);
+
+	/* I/O buffer drive ability is low */
+	ctrl_outw((ctrl_inw(IODRIVEA) & ~0x00c0) | 0x0040 , IODRIVEA);
+
+	if (gpio_get_value(GPIO_PTE6)) {
+		/* DVI */
+		lcdc_info.clock_source			= LCDC_CLK_EXTERNAL;
+		lcdc_info.ch[0].clock_divider		= 1,
+		lcdc_info.ch[0].lcd_cfg.name		= "DVI";
+		lcdc_info.ch[0].lcd_cfg.xres		= 1280;
+		lcdc_info.ch[0].lcd_cfg.yres		= 720;
+		lcdc_info.ch[0].lcd_cfg.left_margin	= 220;
+		lcdc_info.ch[0].lcd_cfg.right_margin	= 110;
+		lcdc_info.ch[0].lcd_cfg.hsync_len	= 40;
+		lcdc_info.ch[0].lcd_cfg.upper_margin	= 20;
+		lcdc_info.ch[0].lcd_cfg.lower_margin	= 5;
+		lcdc_info.ch[0].lcd_cfg.vsync_len	= 5;
+
+		gpio_set_value(GPIO_PTA2, 1);
+		gpio_set_value(GPIO_PTU1, 1);
+	} else {
+		/* Panel */
+
+		lcdc_info.clock_source			= LCDC_CLK_PERIPHERAL;
+		lcdc_info.ch[0].clock_divider		= 2,
+		lcdc_info.ch[0].lcd_cfg.name		= "Panel";
+		lcdc_info.ch[0].lcd_cfg.xres		= 800;
+		lcdc_info.ch[0].lcd_cfg.yres		= 480;
+		lcdc_info.ch[0].lcd_cfg.left_margin	= 220;
+		lcdc_info.ch[0].lcd_cfg.right_margin	= 110;
+		lcdc_info.ch[0].lcd_cfg.hsync_len	= 70;
+		lcdc_info.ch[0].lcd_cfg.upper_margin	= 20;
+		lcdc_info.ch[0].lcd_cfg.lower_margin	= 5;
+		lcdc_info.ch[0].lcd_cfg.vsync_len	= 5;
+
+		gpio_set_value(GPIO_PTR1, 1);
+
+		/* FIXME
+		 *
+		 * LCDDON control is needed for Panel,
+		 * but current sh_mobile_lcdc driver doesn't control it.
+		 * It is temporary correspondence
+		 */
+		gpio_request(GPIO_PTF4, NULL);
+		gpio_direction_output(GPIO_PTF4, 1);
+	}
+
+	/* enable CEU0 */
+	gpio_request(GPIO_FN_VIO0_D15, NULL);
+	gpio_request(GPIO_FN_VIO0_D14, NULL);
+	gpio_request(GPIO_FN_VIO0_D13, NULL);
+	gpio_request(GPIO_FN_VIO0_D12, NULL);
+	gpio_request(GPIO_FN_VIO0_D11, NULL);
+	gpio_request(GPIO_FN_VIO0_D10, NULL);
+	gpio_request(GPIO_FN_VIO0_D9,  NULL);
+	gpio_request(GPIO_FN_VIO0_D8,  NULL);
+	gpio_request(GPIO_FN_VIO0_D7,  NULL);
+	gpio_request(GPIO_FN_VIO0_D6,  NULL);
+	gpio_request(GPIO_FN_VIO0_D5,  NULL);
+	gpio_request(GPIO_FN_VIO0_D4,  NULL);
+	gpio_request(GPIO_FN_VIO0_D3,  NULL);
+	gpio_request(GPIO_FN_VIO0_D2,  NULL);
+	gpio_request(GPIO_FN_VIO0_D1,  NULL);
+	gpio_request(GPIO_FN_VIO0_D0,  NULL);
+	gpio_request(GPIO_FN_VIO0_VD,  NULL);
+	gpio_request(GPIO_FN_VIO0_CLK, NULL);
+	gpio_request(GPIO_FN_VIO0_FLD, NULL);
+	gpio_request(GPIO_FN_VIO0_HD,  NULL);
+	platform_resource_setup_memory(&ceu0_device, "ceu0", 4 << 20);
+
+	/* enable CEU1 */
+	gpio_request(GPIO_FN_VIO1_D7,  NULL);
+	gpio_request(GPIO_FN_VIO1_D6,  NULL);
+	gpio_request(GPIO_FN_VIO1_D5,  NULL);
+	gpio_request(GPIO_FN_VIO1_D4,  NULL);
+	gpio_request(GPIO_FN_VIO1_D3,  NULL);
+	gpio_request(GPIO_FN_VIO1_D2,  NULL);
+	gpio_request(GPIO_FN_VIO1_D1,  NULL);
+	gpio_request(GPIO_FN_VIO1_D0,  NULL);
+	gpio_request(GPIO_FN_VIO1_FLD, NULL);
+	gpio_request(GPIO_FN_VIO1_HD,  NULL);
+	gpio_request(GPIO_FN_VIO1_VD,  NULL);
+	gpio_request(GPIO_FN_VIO1_CLK, NULL);
+	platform_resource_setup_memory(&ceu1_device, "ceu1", 4 << 20);
+
+	/* enable KEYSC */
+	gpio_request(GPIO_FN_KEYOUT5_IN5, NULL);
+	gpio_request(GPIO_FN_KEYOUT4_IN6, NULL);
+	gpio_request(GPIO_FN_KEYOUT3,     NULL);
+	gpio_request(GPIO_FN_KEYOUT2,     NULL);
+	gpio_request(GPIO_FN_KEYOUT1,     NULL);
+	gpio_request(GPIO_FN_KEYOUT0,     NULL);
+	gpio_request(GPIO_FN_KEYIN0,      NULL);
+
+	/* enable user debug switch */
+	gpio_request(GPIO_PTR0, NULL);
+	gpio_request(GPIO_PTR4, NULL);
+	gpio_request(GPIO_PTR5, NULL);
+	gpio_request(GPIO_PTR6, NULL);
+	gpio_direction_input(GPIO_PTR0);
+	gpio_direction_input(GPIO_PTR4);
+	gpio_direction_input(GPIO_PTR5);
+	gpio_direction_input(GPIO_PTR6);
+
+	/* enable I2C device */
+	i2c_register_board_info(1, i2c1_devices,
+				ARRAY_SIZE(i2c1_devices));
+
+	return platform_add_devices(ecovec_devices,
+				    ARRAY_SIZE(ecovec_devices));
+}
+arch_initcall(arch_setup);
+
+static int __init devices_setup(void)
+{
+	sh_eth_init();
+	return 0;
+}
+device_initcall(devices_setup);
+
+
+static struct sh_machine_vector mv_ecovec __initmv = {
+	.mv_name	= "R0P7724 (EcoVec)",
+};
diff --git a/arch/sh/boards/mach-highlander/setup.c b/arch/sh/boards/mach-highlander/setup.c
index 1639f8915000..566e69d8d729 100644
--- a/arch/sh/boards/mach-highlander/setup.c
+++ b/arch/sh/boards/mach-highlander/setup.c
@@ -22,6 +22,7 @@
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/usb/r8a66597.h>
+#include <linux/usb/m66592.h>
 #include <net/ax88796.h>
 #include <asm/machvec.h>
 #include <mach/highlander.h>
@@ -60,6 +61,11 @@ static struct platform_device r8a66597_usb_host_device = {
 	.resource	= r8a66597_usb_host_resources,
 };
 
+static struct m66592_platdata usbf_platdata = {
+	.xtal = M66592_PLATDATA_XTAL_24MHZ,
+	.vif = 1,
+};
+
 static struct resource m66592_usb_peripheral_resources[] = {
 	[0] = {
 		.name	= "m66592_udc",
@@ -81,6 +87,7 @@ static struct platform_device m66592_usb_peripheral_device = {
 	.dev = {
 		.dma_mask		= NULL,		/* don't use dma */
 		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &usbf_platdata,
 	},
 	.num_resources	= ARRAY_SIZE(m66592_usb_peripheral_resources),
 	.resource	= m66592_usb_peripheral_resources,
diff --git a/arch/sh/boards/mach-kfr2r09/Makefile b/arch/sh/boards/mach-kfr2r09/Makefile
new file mode 100644
index 000000000000..5d5867826e3b
--- /dev/null
+++ b/arch/sh/boards/mach-kfr2r09/Makefile
@@ -0,0 +1,2 @@
+obj-y	 := setup.o
+obj-$(CONFIG_FB_SH_MOBILE_LCDC)	+=  lcd_wqvga.o
diff --git a/arch/sh/boards/mach-kfr2r09/lcd_wqvga.c b/arch/sh/boards/mach-kfr2r09/lcd_wqvga.c
new file mode 100644
index 000000000000..8ccb1cc8b589
--- /dev/null
+++ b/arch/sh/boards/mach-kfr2r09/lcd_wqvga.c
@@ -0,0 +1,332 @@
+/*
+ * KFR2R09 LCD panel support
+ *
+ * Copyright (C) 2009 Magnus Damm
+ *
+ * Register settings based on the out-of-tree t33fb.c driver
+ * Copyright (C) 2008 Lineo Solutions, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/gpio.h>
+#include <video/sh_mobile_lcdc.h>
+#include <mach/kfr2r09.h>
+#include <cpu/sh7724.h>
+
+/* The on-board LCD module is a Hitachi TX07D34VM0AAA. This module is made
+ * up of a 240x400 LCD hooked up to a R61517 driver IC. The driver IC is
+ * communicating with the main port of the LCDC using an 18-bit SYS interface.
+ *
+ * The device code for this LCD module is 0x01221517.
+ */
+
+static const unsigned char data_frame_if[] = {
+	0x02, /* WEMODE: 1=cont, 0=one-shot */
+	0x00, 0x00,
+	0x00, /* EPF, DFM */
+	0x02, /* RIM[1] : 1 (18bpp) */
+};
+
+static const unsigned char data_panel[] = {
+	0x0b,
+	0x63, /* 400 lines */
+	0x04, 0x00, 0x00, 0x04, 0x11, 0x00, 0x00,
+};
+
+static const unsigned char data_timing[] = {
+	0x00, 0x00, 0x13, 0x08, 0x08,
+};
+
+static const unsigned char data_timing_src[] = {
+	0x11, 0x01, 0x00, 0x01,
+};
+
+static const unsigned char data_gamma[] = {
+	0x01, 0x02, 0x08, 0x23,	0x03, 0x0c, 0x00, 0x06,	0x00, 0x00,
+	0x01, 0x00, 0x0c, 0x23, 0x03, 0x08, 0x02, 0x06, 0x00, 0x00,
+};
+
+static const unsigned char data_power[] = {
+	0x07, 0xc5, 0xdc, 0x02,	0x33, 0x0a,
+};
+
+static unsigned long read_reg(void *sohandle,
+			      struct sh_mobile_lcdc_sys_bus_ops *so)
+{
+	return so->read_data(sohandle);
+}
+
+static void write_reg(void *sohandle,
+		      struct sh_mobile_lcdc_sys_bus_ops *so,
+		      int i, unsigned long v)
+{
+	if (i)
+		so->write_data(sohandle, v); /* PTH4/LCDRS High [param, 17:0] */
+	else
+		so->write_index(sohandle, v); /* PTH4/LCDRS Low [cmd, 7:0] */
+}
+
+static void write_data(void *sohandle,
+		       struct sh_mobile_lcdc_sys_bus_ops *so,
+		       unsigned char const *data, int no_data)
+{
+	int i;
+
+	for (i = 0; i < no_data; i++)
+		write_reg(sohandle, so, 1, data[i]);
+}
+
+static unsigned long read_device_code(void *sohandle,
+				      struct sh_mobile_lcdc_sys_bus_ops *so)
+{
+	unsigned long device_code;
+
+	/* access protect OFF */
+	write_reg(sohandle, so, 0, 0xb0);
+	write_reg(sohandle, so, 1, 0x00);
+
+	/* deep standby OFF */
+	write_reg(sohandle, so, 0, 0xb1);
+	write_reg(sohandle, so, 1, 0x00);
+
+	/* device code command */
+	write_reg(sohandle, so, 0, 0xbf);
+	mdelay(50);
+
+	/* dummy read */
+	read_reg(sohandle, so);
+
+	/* read device code */
+	device_code = ((read_reg(sohandle, so) & 0xff) << 24);
+	device_code |= ((read_reg(sohandle, so) & 0xff) << 16);
+	device_code |= ((read_reg(sohandle, so) & 0xff) << 8);
+	device_code |= (read_reg(sohandle, so) & 0xff);
+
+	return device_code;
+}
+
+static void write_memory_start(void *sohandle,
+			       struct sh_mobile_lcdc_sys_bus_ops *so)
+{
+	write_reg(sohandle, so, 0, 0x2c);
+}
+
+static void clear_memory(void *sohandle,
+			 struct sh_mobile_lcdc_sys_bus_ops *so)
+{
+	int i;
+
+	/* write start */
+	write_memory_start(sohandle, so);
+
+	/* paint it black */
+	for (i = 0; i < (240 * 400); i++)
+		write_reg(sohandle, so, 1, 0x00);
+}
+
+static void display_on(void *sohandle,
+		       struct sh_mobile_lcdc_sys_bus_ops *so)
+{
+	/* access protect off */
+	write_reg(sohandle, so, 0, 0xb0);
+	write_reg(sohandle, so, 1, 0x00);
+
+	/* exit deep standby mode */
+	write_reg(sohandle, so, 0, 0xb1);
+	write_reg(sohandle, so, 1, 0x00);
+
+	/* frame memory I/F */
+	write_reg(sohandle, so, 0, 0xb3);
+	write_data(sohandle, so, data_frame_if, ARRAY_SIZE(data_frame_if));
+
+	/* display mode and frame memory write mode */
+	write_reg(sohandle, so, 0, 0xb4);
+	write_reg(sohandle, so, 1, 0x00); /* DBI, internal clock */
+
+	/* panel */
+	write_reg(sohandle, so, 0, 0xc0);
+	write_data(sohandle, so, data_panel, ARRAY_SIZE(data_panel));
+
+	/* timing (normal) */
+	write_reg(sohandle, so, 0, 0xc1);
+	write_data(sohandle, so, data_timing, ARRAY_SIZE(data_timing));
+
+	/* timing (partial) */
+	write_reg(sohandle, so, 0, 0xc2);
+	write_data(sohandle, so, data_timing, ARRAY_SIZE(data_timing));
+
+	/* timing (idle) */
+	write_reg(sohandle, so, 0, 0xc3);
+	write_data(sohandle, so, data_timing, ARRAY_SIZE(data_timing));
+
+	/* timing (source/VCOM/gate driving) */
+	write_reg(sohandle, so, 0, 0xc4);
+	write_data(sohandle, so, data_timing_src, ARRAY_SIZE(data_timing_src));
+
+	/* gamma (red) */
+	write_reg(sohandle, so, 0, 0xc8);
+	write_data(sohandle, so, data_gamma, ARRAY_SIZE(data_gamma));
+
+	/* gamma (green) */
+	write_reg(sohandle, so, 0, 0xc9);
+	write_data(sohandle, so, data_gamma, ARRAY_SIZE(data_gamma));
+
+	/* gamma (blue) */
+	write_reg(sohandle, so, 0, 0xca);
+	write_data(sohandle, so, data_gamma, ARRAY_SIZE(data_gamma));
+
+	/* power (common) */
+	write_reg(sohandle, so, 0, 0xd0);
+	write_data(sohandle, so, data_power, ARRAY_SIZE(data_power));
+
+	/* VCOM */
+	write_reg(sohandle, so, 0, 0xd1);
+	write_reg(sohandle, so, 1, 0x00);
+	write_reg(sohandle, so, 1, 0x0f);
+	write_reg(sohandle, so, 1, 0x02);
+
+	/* power (normal) */
+	write_reg(sohandle, so, 0, 0xd2);
+	write_reg(sohandle, so, 1, 0x63);
+	write_reg(sohandle, so, 1, 0x24);
+
+	/* power (partial) */
+	write_reg(sohandle, so, 0, 0xd3);
+	write_reg(sohandle, so, 1, 0x63);
+	write_reg(sohandle, so, 1, 0x24);
+
+	/* power (idle) */
+	write_reg(sohandle, so, 0, 0xd4);
+	write_reg(sohandle, so, 1, 0x63);
+	write_reg(sohandle, so, 1, 0x24);
+
+	write_reg(sohandle, so, 0, 0xd8);
+	write_reg(sohandle, so, 1, 0x77);
+	write_reg(sohandle, so, 1, 0x77);
+
+	/* TE signal */
+	write_reg(sohandle, so, 0, 0x35);
+	write_reg(sohandle, so, 1, 0x00);
+
+	/* TE signal line */
+	write_reg(sohandle, so, 0, 0x44);
+	write_reg(sohandle, so, 1, 0x00);
+	write_reg(sohandle, so, 1, 0x00);
+
+	/* column address */
+	write_reg(sohandle, so, 0, 0x2a);
+	write_reg(sohandle, so, 1, 0x00);
+	write_reg(sohandle, so, 1, 0x00);
+	write_reg(sohandle, so, 1, 0x00);
+	write_reg(sohandle, so, 1, 0xef);
+
+	/* page address */
+	write_reg(sohandle, so, 0, 0x2b);
+	write_reg(sohandle, so, 1, 0x00);
+	write_reg(sohandle, so, 1, 0x00);
+	write_reg(sohandle, so, 1, 0x01);
+	write_reg(sohandle, so, 1, 0x8f);
+
+	/* exit sleep mode */
+	write_reg(sohandle, so, 0, 0x11);
+
+	mdelay(120);
+
+	/* clear vram */
+	clear_memory(sohandle, so);
+
+	/* display ON */
+	write_reg(sohandle, so, 0, 0x29);
+	mdelay(1);
+
+	write_memory_start(sohandle, so);
+}
+
+int kfr2r09_lcd_setup(void *board_data, void *sohandle,
+		      struct sh_mobile_lcdc_sys_bus_ops *so)
+{
+	/* power on */
+	gpio_set_value(GPIO_PTF4, 0);  /* PROTECT/ -> L */
+	gpio_set_value(GPIO_PTE4, 0);  /* LCD_RST/ -> L */
+	gpio_set_value(GPIO_PTF4, 1);  /* PROTECT/ -> H */
+	udelay(1100);
+	gpio_set_value(GPIO_PTE4, 1);  /* LCD_RST/ -> H */
+	udelay(10);
+	gpio_set_value(GPIO_PTF4, 0);  /* PROTECT/ -> L */
+	mdelay(20);
+
+	if (read_device_code(sohandle, so) != 0x01221517)
+		return -ENODEV;
+
+	pr_info("KFR2R09 WQVGA LCD Module detected.\n");
+
+	display_on(sohandle, so);
+	return 0;
+}
+
+#define CTRL_CKSW       0x10
+#define CTRL_C10        0x20
+#define CTRL_CPSW       0x80
+#define MAIN_MLED4      0x40
+#define MAIN_MSW        0x80
+
+static int kfr2r09_lcd_backlight(int on)
+{
+	struct i2c_adapter *a;
+	struct i2c_msg msg;
+	unsigned char buf[2];
+	int ret;
+
+	a = i2c_get_adapter(0);
+	if (!a)
+		return -ENODEV;
+
+	buf[0] = 0x00;
+	if (on)
+		buf[1] = CTRL_CPSW | CTRL_C10 | CTRL_CKSW;
+	else
+		buf[1] = 0;
+
+	msg.addr = 0x75;
+	msg.buf = buf;
+	msg.len = 2;
+	msg.flags = 0;
+	ret = i2c_transfer(a, &msg, 1);
+	if (ret != 1)
+		return -ENODEV;
+
+	buf[0] = 0x01;
+	if (on)
+		buf[1] = MAIN_MSW | MAIN_MLED4 | 0x0c;
+	else
+		buf[1] = 0;
+
+	msg.addr = 0x75;
+	msg.buf = buf;
+	msg.len = 2;
+	msg.flags = 0;
+	ret = i2c_transfer(a, &msg, 1);
+	if (ret != 1)
+		return -ENODEV;
+
+	return 0;
+}
+
+void kfr2r09_lcd_on(void *board_data)
+{
+	kfr2r09_lcd_backlight(1);
+}
+
+void kfr2r09_lcd_off(void *board_data)
+{
+	kfr2r09_lcd_backlight(0);
+}
diff --git a/arch/sh/boards/mach-kfr2r09/setup.c b/arch/sh/boards/mach-kfr2r09/setup.c
new file mode 100644
index 000000000000..c08d33fe2104
--- /dev/null
+++ b/arch/sh/boards/mach-kfr2r09/setup.c
@@ -0,0 +1,386 @@
+/*
+ * KFR2R09 board support code
+ *
+ * Copyright (C) 2009 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/onenand.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/usb/r8a66597.h>
+#include <video/sh_mobile_lcdc.h>
+#include <asm/clock.h>
+#include <asm/machvec.h>
+#include <asm/io.h>
+#include <asm/sh_keysc.h>
+#include <cpu/sh7724.h>
+#include <mach/kfr2r09.h>
+
+static struct mtd_partition kfr2r09_nor_flash_partitions[] =
+{
+	{
+		.name = "boot",
+		.offset = 0,
+		.size = (4 * 1024 * 1024),
+		.mask_flags = MTD_WRITEABLE,	/* Read-only */
+	},
+	{
+		.name = "other",
+		.offset = MTDPART_OFS_APPEND,
+		.size = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data kfr2r09_nor_flash_data = {
+	.width		= 2,
+	.parts		= kfr2r09_nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(kfr2r09_nor_flash_partitions),
+};
+
+static struct resource kfr2r09_nor_flash_resources[] = {
+	[0] = {
+		.name		= "NOR Flash",
+		.start		= 0x00000000,
+		.end		= 0x03ffffff,
+		.flags		= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device kfr2r09_nor_flash_device = {
+	.name		= "physmap-flash",
+	.resource	= kfr2r09_nor_flash_resources,
+	.num_resources	= ARRAY_SIZE(kfr2r09_nor_flash_resources),
+	.dev		= {
+		.platform_data = &kfr2r09_nor_flash_data,
+	},
+};
+
+static struct resource kfr2r09_nand_flash_resources[] = {
+	[0] = {
+		.name		= "NAND Flash",
+		.start		= 0x10000000,
+		.end		= 0x1001ffff,
+		.flags		= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device kfr2r09_nand_flash_device = {
+	.name		= "onenand-flash",
+	.resource	= kfr2r09_nand_flash_resources,
+	.num_resources	= ARRAY_SIZE(kfr2r09_nand_flash_resources),
+};
+
+static struct sh_keysc_info kfr2r09_sh_keysc_info = {
+	.mode = SH_KEYSC_MODE_1, /* KEYOUT0->4, KEYIN0->4 */
+	.scan_timing = 3,
+	.delay = 10,
+	.keycodes = {
+		KEY_PHONE, KEY_CLEAR, KEY_MAIL, KEY_WWW, KEY_ENTER,
+		KEY_1, KEY_2, KEY_3, 0, KEY_UP,
+		KEY_4, KEY_5, KEY_6, 0, KEY_LEFT,
+		KEY_7, KEY_8, KEY_9, KEY_PROG1, KEY_RIGHT,
+		KEY_S, KEY_0, KEY_P, KEY_PROG2, KEY_DOWN,
+		0, 0, 0, 0, 0
+	},
+};
+
+static struct resource kfr2r09_sh_keysc_resources[] = {
+	[0] = {
+		.name	= "KEYSC",
+		.start  = 0x044b0000,
+		.end    = 0x044b000f,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 79,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device kfr2r09_sh_keysc_device = {
+	.name           = "sh_keysc",
+	.id             = 0, /* "keysc0" clock */
+	.num_resources  = ARRAY_SIZE(kfr2r09_sh_keysc_resources),
+	.resource       = kfr2r09_sh_keysc_resources,
+	.dev	= {
+		.platform_data	= &kfr2r09_sh_keysc_info,
+	},
+	.archdata = {
+		.hwblk_id = HWBLK_KEYSC,
+	},
+};
+
+static struct sh_mobile_lcdc_info kfr2r09_sh_lcdc_info = {
+	.clock_source = LCDC_CLK_BUS,
+	.ch[0] = {
+		.chan = LCDC_CHAN_MAINLCD,
+		.bpp = 16,
+		.interface_type = SYS18,
+		.clock_divider = 6,
+		.flags = LCDC_FLAGS_DWPOL,
+		.lcd_cfg = {
+			.name = "TX07D34VM0AAA",
+			.xres = 240,
+			.yres = 400,
+			.left_margin = 0,
+			.right_margin = 16,
+			.hsync_len = 8,
+			.upper_margin = 0,
+			.lower_margin = 1,
+			.vsync_len = 1,
+			.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+		},
+		.lcd_size_cfg = {
+			.width = 35,
+			.height = 58,
+		},
+		.board_cfg = {
+			.setup_sys = kfr2r09_lcd_setup,
+			.display_on = kfr2r09_lcd_on,
+			.display_off = kfr2r09_lcd_off,
+		},
+		.sys_bus_cfg = {
+			.ldmt2r = 0x07010904,
+			.ldmt3r = 0x14012914,
+			/* set 1s delay to encourage fsync() */
+			.deferred_io_msec = 1000,
+		},
+	}
+};
+
+static struct resource kfr2r09_sh_lcdc_resources[] = {
+	[0] = {
+		.name	= "LCDC",
+		.start	= 0xfe940000, /* P4-only space */
+		.end	= 0xfe942fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 106,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device kfr2r09_sh_lcdc_device = {
+	.name		= "sh_mobile_lcdc_fb",
+	.num_resources	= ARRAY_SIZE(kfr2r09_sh_lcdc_resources),
+	.resource	= kfr2r09_sh_lcdc_resources,
+	.dev	= {
+		.platform_data	= &kfr2r09_sh_lcdc_info,
+	},
+	.archdata = {
+		.hwblk_id = HWBLK_LCDC,
+	},
+};
+
+static struct r8a66597_platdata kfr2r09_usb0_gadget_data = {
+	.on_chip = 1,
+};
+
+static struct resource kfr2r09_usb0_gadget_resources[] = {
+	[0] = {
+		.start	= 0x04d80000,
+		.end	= 0x04d80123,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 65,
+		.end	= 65,
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
+	},
+};
+
+static struct platform_device kfr2r09_usb0_gadget_device = {
+	.name		= "r8a66597_udc",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= NULL,         /*  not use dma */
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data	= &kfr2r09_usb0_gadget_data,
+	},
+	.num_resources	= ARRAY_SIZE(kfr2r09_usb0_gadget_resources),
+	.resource	= kfr2r09_usb0_gadget_resources,
+};
+
+static struct platform_device *kfr2r09_devices[] __initdata = {
+	&kfr2r09_nor_flash_device,
+	&kfr2r09_nand_flash_device,
+	&kfr2r09_sh_keysc_device,
+	&kfr2r09_sh_lcdc_device,
+};
+
+#define BSC_CS0BCR 0xfec10004
+#define BSC_CS0WCR 0xfec10024
+#define BSC_CS4BCR 0xfec10010
+#define BSC_CS4WCR 0xfec10030
+#define PORT_MSELCRB 0xa4050182
+
+#ifdef CONFIG_I2C
+static int kfr2r09_usb0_gadget_i2c_setup(void)
+{
+	struct i2c_adapter *a;
+	struct i2c_msg msg;
+	unsigned char buf[2];
+	int ret;
+
+	a = i2c_get_adapter(0);
+	if (!a)
+		return -ENODEV;
+
+	/* set bit 1 (the second bit) of chip at 0x09, register 0x13 */
+	buf[0] = 0x13;
+	msg.addr = 0x09;
+	msg.buf = buf;
+	msg.len = 1;
+	msg.flags = 0;
+	ret = i2c_transfer(a, &msg, 1);
+	if (ret != 1)
+		return -ENODEV;
+
+	buf[0] = 0;
+	msg.addr = 0x09;
+	msg.buf = buf;
+	msg.len = 1;
+	msg.flags = I2C_M_RD;
+	ret = i2c_transfer(a, &msg, 1);
+	if (ret != 1)
+		return -ENODEV;
+
+	buf[1] = buf[0] | (1 << 1);
+	buf[0] = 0x13;
+	msg.addr = 0x09;
+	msg.buf = buf;
+	msg.len = 2;
+	msg.flags = 0;
+	ret = i2c_transfer(a, &msg, 1);
+	if (ret != 1)
+		return -ENODEV;
+
+	return 0;
+}
+#else
+static int kfr2r09_usb0_gadget_i2c_setup(void)
+{
+	return -ENODEV;
+}
+#endif
+
+static int kfr2r09_usb0_gadget_setup(void)
+{
+	int plugged_in;
+
+	gpio_request(GPIO_PTN4, NULL); /* USB_DET */
+	gpio_direction_input(GPIO_PTN4);
+	plugged_in = gpio_get_value(GPIO_PTN4);
+	if (!plugged_in)
+		return -ENODEV; /* no cable plugged in */
+
+	if (kfr2r09_usb0_gadget_i2c_setup() != 0)
+		return -ENODEV; /* unable to configure using i2c */
+
+	ctrl_outw((ctrl_inw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB);
+	gpio_request(GPIO_FN_PDSTATUS, NULL); /* R-standby disables USB clock */
+	gpio_request(GPIO_PTV6, NULL); /* USBCLK_ON */
+	gpio_direction_output(GPIO_PTV6, 1); /* USBCLK_ON = H */
+	msleep(20); /* wait 20ms to let the clock settle */
+	clk_enable(clk_get(NULL, "usb0"));
+	ctrl_outw(0x0600, 0xa40501d4);
+
+	return 0;
+}
+
+static int __init kfr2r09_devices_setup(void)
+{
+	/* enable SCIF1 serial port for YC401 console support */
+	gpio_request(GPIO_FN_SCIF1_RXD, NULL);
+	gpio_request(GPIO_FN_SCIF1_TXD, NULL);
+
+	/* setup NOR flash at CS0 */
+	ctrl_outl(0x36db0400, BSC_CS0BCR);
+	ctrl_outl(0x00000500, BSC_CS0WCR);
+
+	/* setup NAND flash at CS4 */
+	ctrl_outl(0x36db0400, BSC_CS4BCR);
+	ctrl_outl(0x00000500, BSC_CS4WCR);
+
+	/* setup KEYSC pins */
+	gpio_request(GPIO_FN_KEYOUT0, NULL);
+	gpio_request(GPIO_FN_KEYOUT1, NULL);
+	gpio_request(GPIO_FN_KEYOUT2, NULL);
+	gpio_request(GPIO_FN_KEYOUT3, NULL);
+	gpio_request(GPIO_FN_KEYOUT4_IN6, NULL);
+	gpio_request(GPIO_FN_KEYIN0, NULL);
+	gpio_request(GPIO_FN_KEYIN1, NULL);
+	gpio_request(GPIO_FN_KEYIN2, NULL);
+	gpio_request(GPIO_FN_KEYIN3, NULL);
+	gpio_request(GPIO_FN_KEYIN4, NULL);
+	gpio_request(GPIO_FN_KEYOUT5_IN5, NULL);
+
+	/* setup LCDC pins for SYS panel */
+	gpio_request(GPIO_FN_LCDD17, NULL);
+	gpio_request(GPIO_FN_LCDD16, NULL);
+	gpio_request(GPIO_FN_LCDD15, NULL);
+	gpio_request(GPIO_FN_LCDD14, NULL);
+	gpio_request(GPIO_FN_LCDD13, NULL);
+	gpio_request(GPIO_FN_LCDD12, NULL);
+	gpio_request(GPIO_FN_LCDD11, NULL);
+	gpio_request(GPIO_FN_LCDD10, NULL);
+	gpio_request(GPIO_FN_LCDD9, NULL);
+	gpio_request(GPIO_FN_LCDD8, NULL);
+	gpio_request(GPIO_FN_LCDD7, NULL);
+	gpio_request(GPIO_FN_LCDD6, NULL);
+	gpio_request(GPIO_FN_LCDD5, NULL);
+	gpio_request(GPIO_FN_LCDD4, NULL);
+	gpio_request(GPIO_FN_LCDD3, NULL);
+	gpio_request(GPIO_FN_LCDD2, NULL);
+	gpio_request(GPIO_FN_LCDD1, NULL);
+	gpio_request(GPIO_FN_LCDD0, NULL);
+	gpio_request(GPIO_FN_LCDRS, NULL); /* LCD_RS */
+	gpio_request(GPIO_FN_LCDCS, NULL); /* LCD_CS/ */
+	gpio_request(GPIO_FN_LCDRD, NULL); /* LCD_RD/ */
+	gpio_request(GPIO_FN_LCDWR, NULL); /* LCD_WR/ */
+	gpio_request(GPIO_FN_LCDVSYN, NULL); /* LCD_VSYNC */
+	gpio_request(GPIO_PTE4, NULL); /* LCD_RST/ */
+	gpio_direction_output(GPIO_PTE4, 1);
+	gpio_request(GPIO_PTF4, NULL); /* PROTECT/ */
+	gpio_direction_output(GPIO_PTF4, 1);
+	gpio_request(GPIO_PTU0, NULL); /* LEDSTDBY/ */
+	gpio_direction_output(GPIO_PTU0, 1);
+
+	/* setup USB function */
+	if (kfr2r09_usb0_gadget_setup() == 0)
+		platform_device_register(&kfr2r09_usb0_gadget_device);
+
+	return platform_add_devices(kfr2r09_devices,
+				    ARRAY_SIZE(kfr2r09_devices));
+}
+device_initcall(kfr2r09_devices_setup);
+
+/* Return the board specific boot mode pin configuration */
+static int kfr2r09_mode_pins(void)
+{
+	/* MD0=1, MD1=1, MD2=0: Clock Mode 3
+	 * MD3=0: 16-bit Area0 Bus Width
+	 * MD5=1: Little Endian
+	 * MD8=1: Test Mode Disabled
+	 */
+	return MODE_PIN0 | MODE_PIN1 | MODE_PIN5 | MODE_PIN8;
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_kfr2r09 __initmv = {
+	.mv_name		= "kfr2r09",
+	.mv_mode_pins		= kfr2r09_mode_pins,
+};
diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c
index f9b2e4df35b9..6ed1fd32369e 100644
--- a/arch/sh/boards/mach-migor/setup.c
+++ b/arch/sh/boards/mach-migor/setup.c
@@ -98,6 +98,9 @@ static struct platform_device sh_keysc_device = {
 	.dev	= {
 		.platform_data	= &sh_keysc_info,
 	},
+	.archdata = {
+		.hwblk_id = HWBLK_KEYSC,
+	},
 };
 
 static struct mtd_partition migor_nor_flash_partitions[] =
@@ -276,7 +279,7 @@ static struct resource migor_lcdc_resources[] = {
 	[0] = {
 		.name	= "LCDC",
 		.start	= 0xfe940000, /* P4-only space */
-		.end	= 0xfe941fff,
+		.end	= 0xfe942fff,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -292,6 +295,9 @@ static struct platform_device migor_lcdc_device = {
 	.dev	= {
 		.platform_data	= &sh_mobile_lcdc_info,
 	},
+	.archdata = {
+		.hwblk_id = HWBLK_LCDC,
+	},
 };
 
 static struct clk *camera_clk;
@@ -379,6 +385,9 @@ static struct platform_device migor_ceu_device = {
 	.dev	= {
 		.platform_data	= &sh_mobile_ceu_info,
 	},
+	.archdata = {
+		.hwblk_id = HWBLK_CEU,
+	},
 };
 
 struct spi_gpio_platform_data sdcard_cn9_platform_data = {
diff --git a/arch/sh/boards/mach-se/7722/setup.c b/arch/sh/boards/mach-se/7722/setup.c
index af84904ed86f..36374078e521 100644
--- a/arch/sh/boards/mach-se/7722/setup.c
+++ b/arch/sh/boards/mach-se/7722/setup.c
@@ -22,6 +22,7 @@
 #include <asm/io.h>
 #include <asm/heartbeat.h>
 #include <asm/sh_keysc.h>
+#include <cpu/sh7722.h>
 
 /* Heartbeat */
 static struct heartbeat_data heartbeat_data = {
@@ -137,6 +138,9 @@ static struct platform_device sh_keysc_device = {
 	.dev	= {
 		.platform_data	= &sh_keysc_info,
 	},
+	.archdata = {
+		.hwblk_id = HWBLK_KEYSC,
+	},
 };
 
 static struct platform_device *se7722_devices[] __initdata = {
diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index 15456a0773bf..00973e0f8c63 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -39,7 +39,15 @@
  * SW41 : abxx xxxx  -> a = 0 : Analog  monitor
  *                          1 : Digital monitor
  *                      b = 0 : VGA
- *                          1 : SVGA
+ *                          1 : 720p
+ */
+
+/*
+ * about 720p
+ *
+ * When you use 1280 x 720 lcdc output,
+ * you should change OSC6 lcdc clock from 25.175MHz to 74.25MHz,
+ * and change SW41 to use 720p
  */
 
 /* Heartbeat */
@@ -158,7 +166,7 @@ static struct resource lcdc_resources[] = {
 	[0] = {
 		.name	= "LCDC",
 		.start	= 0xfe940000,
-		.end	= 0xfe941fff,
+		.end	= 0xfe942fff,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -174,6 +182,9 @@ static struct platform_device lcdc_device = {
 	.dev		= {
 		.platform_data	= &lcdc_info,
 	},
+	.archdata = {
+		.hwblk_id = HWBLK_LCDC,
+	},
 };
 
 /* CEU0 */
@@ -205,6 +216,9 @@ static struct platform_device ceu0_device = {
 	.dev	= {
 		.platform_data	= &sh_mobile_ceu0_info,
 	},
+	.archdata = {
+		.hwblk_id = HWBLK_CEU0,
+	},
 };
 
 /* CEU1 */
@@ -236,6 +250,9 @@ static struct platform_device ceu1_device = {
 	.dev	= {
 		.platform_data	= &sh_mobile_ceu1_info,
 	},
+	.archdata = {
+		.hwblk_id = HWBLK_CEU1,
+	},
 };
 
 /* KEYSC in SoC (Needs SW33-2 set to ON) */
@@ -274,6 +291,9 @@ static struct platform_device keysc_device = {
 	.dev	= {
 		.platform_data	= &keysc_info,
 	},
+	.archdata = {
+		.hwblk_id = HWBLK_KEYSC,
+	},
 };
 
 /* SH Eth */
@@ -302,15 +322,19 @@ static struct platform_device sh_eth_device = {
 	},
 	.num_resources = ARRAY_SIZE(sh_eth_resources),
 	.resource = sh_eth_resources,
+	.archdata = {
+		.hwblk_id = HWBLK_ETHER,
+	},
 };
 
 static struct r8a66597_platdata sh7724_usb0_host_data = {
+	.on_chip = 1,
 };
 
 static struct resource sh7724_usb0_host_resources[] = {
 	[0] = {
 		.start	= 0xa4d80000,
-		.end	= 0xa4d800ff,
+		.end	= 0xa4d80124 - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -330,6 +354,38 @@ static struct platform_device sh7724_usb0_host_device = {
 	},
 	.num_resources	= ARRAY_SIZE(sh7724_usb0_host_resources),
 	.resource	= sh7724_usb0_host_resources,
+	.archdata = {
+		.hwblk_id = HWBLK_USB0,
+	},
+};
+
+static struct r8a66597_platdata sh7724_usb1_gadget_data = {
+	.on_chip = 1,
+};
+
+static struct resource sh7724_usb1_gadget_resources[] = {
+	[0] = {
+		.start	= 0xa4d90000,
+		.end	= 0xa4d90123,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 66,
+		.end	= 66,
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
+	},
+};
+
+static struct platform_device sh7724_usb1_gadget_device = {
+	.name		= "r8a66597_udc",
+	.id		= 1, /* USB1 */
+	.dev = {
+		.dma_mask		= NULL,         /*  not use dma */
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &sh7724_usb1_gadget_data,
+	},
+	.num_resources	= ARRAY_SIZE(sh7724_usb1_gadget_resources),
+	.resource	= sh7724_usb1_gadget_resources,
 };
 
 static struct platform_device *ms7724se_devices[] __initdata = {
@@ -342,6 +398,7 @@ static struct platform_device *ms7724se_devices[] __initdata = {
 	&keysc_device,
 	&sh_eth_device,
 	&sh7724_usb0_host_device,
+	&sh7724_usb1_gadget_device,
 };
 
 #define EEPROM_OP   0xBA206000
@@ -421,9 +478,38 @@ static int __init devices_setup(void)
 	/* turn on USB clocks, use external clock */
 	ctrl_outw((ctrl_inw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB);
 
+#ifdef CONFIG_PM
+	/* Let LED9 show STATUS2 */
+	gpio_request(GPIO_FN_STATUS2, NULL);
+
+	/* Lit LED10 show STATUS0 */
+	gpio_request(GPIO_FN_STATUS0, NULL);
+
+	/* Lit LED11 show PDSTATUS */
+	gpio_request(GPIO_FN_PDSTATUS, NULL);
+#else
+	/* Lit LED9 */
+	gpio_request(GPIO_PTJ6, NULL);
+	gpio_direction_output(GPIO_PTJ6, 1);
+	gpio_export(GPIO_PTJ6, 0);
+
+	/* Lit LED10 */
+	gpio_request(GPIO_PTJ5, NULL);
+	gpio_direction_output(GPIO_PTJ5, 1);
+	gpio_export(GPIO_PTJ5, 0);
+
+	/* Lit LED11 */
+	gpio_request(GPIO_PTJ7, NULL);
+	gpio_direction_output(GPIO_PTJ7, 1);
+	gpio_export(GPIO_PTJ7, 0);
+#endif
+
 	/* enable USB0 port */
 	ctrl_outw(0x0600, 0xa40501d4);
 
+	/* enable USB1 port */
+	ctrl_outw(0x0600, 0xa4050192);
+
 	/* enable IRQ 0,1,2 */
 	gpio_request(GPIO_FN_INTC_IRQ0, NULL);
 	gpio_request(GPIO_FN_INTC_IRQ1, NULL);
@@ -546,15 +632,15 @@ static int __init devices_setup(void)
 	sh_eth_init();
 
 	if (sw & SW41_B) {
-		/* SVGA */
-		lcdc_info.ch[0].lcd_cfg.xres         = 800;
-		lcdc_info.ch[0].lcd_cfg.yres         = 600;
-		lcdc_info.ch[0].lcd_cfg.left_margin  = 142;
-		lcdc_info.ch[0].lcd_cfg.right_margin = 52;
-		lcdc_info.ch[0].lcd_cfg.hsync_len    = 96;
-		lcdc_info.ch[0].lcd_cfg.upper_margin = 24;
-		lcdc_info.ch[0].lcd_cfg.lower_margin = 2;
-		lcdc_info.ch[0].lcd_cfg.vsync_len    = 2;
+		/* 720p */
+		lcdc_info.ch[0].lcd_cfg.xres         = 1280;
+		lcdc_info.ch[0].lcd_cfg.yres         = 720;
+		lcdc_info.ch[0].lcd_cfg.left_margin  = 220;
+		lcdc_info.ch[0].lcd_cfg.right_margin = 110;
+		lcdc_info.ch[0].lcd_cfg.hsync_len    = 40;
+		lcdc_info.ch[0].lcd_cfg.upper_margin = 20;
+		lcdc_info.ch[0].lcd_cfg.lower_margin = 5;
+		lcdc_info.ch[0].lcd_cfg.vsync_len    = 5;
 	} else {
 		/* VGA */
 		lcdc_info.ch[0].lcd_cfg.xres         = 640;
diff --git a/arch/sh/boards/mach-x3proto/setup.c b/arch/sh/boards/mach-x3proto/setup.c
index 8913ae39a802..efe4cb9f8a77 100644
--- a/arch/sh/boards/mach-x3proto/setup.c
+++ b/arch/sh/boards/mach-x3proto/setup.c
@@ -17,6 +17,7 @@
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/usb/r8a66597.h>
+#include <linux/usb/m66592.h>
 #include <asm/ilsel.h>
 
 static struct resource heartbeat_resources[] = {
@@ -89,6 +90,11 @@ static struct platform_device r8a66597_usb_host_device = {
 	.resource	= r8a66597_usb_host_resources,
 };
 
+static struct m66592_platdata usbf_platdata = {
+	.xtal = M66592_PLATDATA_XTAL_24MHZ,
+	.vif = 1,
+};
+
 static struct resource m66592_usb_peripheral_resources[] = {
 	[0] = {
 		.name	= "m66592_udc",
@@ -109,6 +115,7 @@ static struct platform_device m66592_usb_peripheral_device = {
 	.dev = {
 		.dma_mask		= NULL,		/* don't use dma */
 		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &usbf_platdata,
 	},
 	.num_resources	= ARRAY_SIZE(m66592_usb_peripheral_resources),
 	.resource	= m66592_usb_peripheral_resources,