sh: Shuffle the board directories in to mach groups.

This flattens out the board directories in to individual mach groups,
we will use this for getting rid of unneeded directories, simplifying
the build system, and becoming more coherent with the refactored
arch/sh/include topology.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

4 files changed, 491 insertions, 0 deletions

diff --git a/arch/sh/boards/mach-se/770x/Makefile b/arch/sh/boards/mach-se/770x/Makefile
new file mode 100644
index 000000000000..8e624b06d5ea
--- /dev/null
+++ b/arch/sh/boards/mach-se/770x/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the 770x SolutionEngine specific parts of the kernel
+#
+
+obj-y	 := setup.o io.o irq.o
diff --git a/arch/sh/boards/mach-se/770x/io.c b/arch/sh/boards/mach-se/770x/io.c
new file mode 100644
index 000000000000..b1ec085b8673
--- /dev/null
+++ b/arch/sh/boards/mach-se/770x/io.c
@@ -0,0 +1,156 @@
+/*
+ * Copyright (C) 2000  Kazumoto Kojima
+ *
+ * I/O routine for Hitachi SolutionEngine.
+ */
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <asm/io.h>
+#include <asm/se.h>
+
+/* MS7750 requires special versions of in*, out* routines, since
+   PC-like io ports are located at upper half byte of 16-bit word which
+   can be accessed only with 16-bit wide.  */
+
+static inline volatile __u16 *
+port2adr(unsigned int port)
+{
+	if (port & 0xff000000)
+		return ( volatile __u16 *) port;
+	if (port >= 0x2000)
+		return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000));
+	else if (port >= 0x1000)
+		return (volatile __u16 *) (PA_83902 + (port << 1));
+	else
+		return (volatile __u16 *) (PA_SUPERIO + (port << 1));
+}
+
+static inline int
+shifted_port(unsigned long port)
+{
+	/* For IDE registers, value is not shifted */
+	if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6)
+		return 0;
+	else
+		return 1;
+}
+
+unsigned char se_inb(unsigned long port)
+{
+	if (shifted_port(port))
+		return (*port2adr(port) >> 8);
+	else
+		return (*port2adr(port))&0xff;
+}
+
+unsigned char se_inb_p(unsigned long port)
+{
+	unsigned long v;
+
+	if (shifted_port(port))
+		v = (*port2adr(port) >> 8);
+	else
+		v = (*port2adr(port))&0xff;
+	ctrl_delay();
+	return v;
+}
+
+unsigned short se_inw(unsigned long port)
+{
+	if (port >= 0x2000)
+		return *port2adr(port);
+	else
+		maybebadio(port);
+	return 0;
+}
+
+unsigned int se_inl(unsigned long port)
+{
+	maybebadio(port);
+	return 0;
+}
+
+void se_outb(unsigned char value, unsigned long port)
+{
+	if (shifted_port(port))
+		*(port2adr(port)) = value << 8;
+	else
+		*(port2adr(port)) = value;
+}
+
+void se_outb_p(unsigned char value, unsigned long port)
+{
+	if (shifted_port(port))
+		*(port2adr(port)) = value << 8;
+	else
+		*(port2adr(port)) = value;
+	ctrl_delay();
+}
+
+void se_outw(unsigned short value, unsigned long port)
+{
+	if (port >= 0x2000)
+		*port2adr(port) = value;
+	else
+		maybebadio(port);
+}
+
+void se_outl(unsigned int value, unsigned long port)
+{
+	maybebadio(port);
+}
+
+void se_insb(unsigned long port, void *addr, unsigned long count)
+{
+	volatile __u16 *p = port2adr(port);
+	__u8 *ap = addr;
+
+	if (shifted_port(port)) {
+		while (count--)
+			*ap++ = *p >> 8;
+	} else {
+		while (count--)
+			*ap++ = *p;
+	}
+}
+
+void se_insw(unsigned long port, void *addr, unsigned long count)
+{
+	volatile __u16 *p = port2adr(port);
+	__u16 *ap = addr;
+	while (count--)
+		*ap++ = *p;
+}
+
+void se_insl(unsigned long port, void *addr, unsigned long count)
+{
+	maybebadio(port);
+}
+
+void se_outsb(unsigned long port, const void *addr, unsigned long count)
+{
+	volatile __u16 *p = port2adr(port);
+	const __u8 *ap = addr;
+
+	if (shifted_port(port)) {
+		while (count--)
+			*p = *ap++ << 8;
+	} else {
+		while (count--)
+			*p = *ap++;
+	}
+}
+
+void se_outsw(unsigned long port, const void *addr, unsigned long count)
+{
+	volatile __u16 *p = port2adr(port);
+	const __u16 *ap = addr;
+
+	while (count--)
+		*p = *ap++;
+}
+
+void se_outsl(unsigned long port, const void *addr, unsigned long count)
+{
+	maybebadio(port);
+}
diff --git a/arch/sh/boards/mach-se/770x/irq.c b/arch/sh/boards/mach-se/770x/irq.c
new file mode 100644
index 000000000000..cdb0807928a5
--- /dev/null
+++ b/arch/sh/boards/mach-se/770x/irq.c
@@ -0,0 +1,108 @@
+/*
+ * linux/arch/sh/boards/se/770x/irq.c
+ *
+ * Copyright (C) 2000  Kazumoto Kojima
+ * Copyright (C) 2006  Nobuhiro Iwamatsu
+ *
+ * Hitachi SolutionEngine Support.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/se.h>
+
+static struct ipr_data ipr_irq_table[] = {
+	/*
+	* Super I/O (Just mimic PC):
+	*  1: keyboard
+	*  3: serial 0
+	*  4: serial 1
+	*  5: printer
+	*  6: floppy
+	*  8: rtc
+	* 12: mouse
+	* 14: ide0
+	*/
+#if defined(CONFIG_CPU_SUBTYPE_SH7705)
+	/* This is default value */
+	{ 13, 0, 8,  0x0f-13, },
+	{ 5 , 0, 4,  0x0f- 5, },
+	{ 10, 1, 0,  0x0f-10, },
+	{ 7 , 2, 4,  0x0f- 7, },
+	{ 3 , 2, 0,  0x0f- 3, },
+	{ 1 , 3, 12, 0x0f- 1, },
+	{ 12, 3, 4,  0x0f-12, }, /* LAN */
+	{ 2 , 4, 8,  0x0f- 2, }, /* PCIRQ2 */
+	{ 6 , 4, 4,  0x0f- 6, }, /* PCIRQ1 */
+	{ 14, 4, 0,  0x0f-14, }, /* PCIRQ0 */
+	{ 0 , 5, 12, 0x0f   , }, 
+	{ 4 , 5, 4,  0x0f- 4, },
+	{ 8 , 6, 12, 0x0f- 8, },
+	{ 9 , 6, 8,  0x0f- 9, },
+	{ 11, 6, 4,  0x0f-11, },
+#else
+	{ 14, 0,  8, 0x0f-14, },
+	{ 12, 0,  4, 0x0f-12, },
+	{  8, 1,  4, 0x0f- 8, },
+	{  6, 2, 12, 0x0f- 6, },
+	{  5, 2,  8, 0x0f- 5, },
+	{  4, 2,  4, 0x0f- 4, },
+	{  3, 2,  0, 0x0f- 3, },
+	{  1, 3, 12, 0x0f- 1, },
+#if defined(CONFIG_STNIC)
+	/* ST NIC */
+	{ 10, 3,  4, 0x0f-10, }, 	/* LAN */
+#endif
+	/* MRSHPC IRQs setting */
+	{  0, 4, 12, 0x0f- 0, },	/* PCIRQ3 */
+	{ 11, 4,  8, 0x0f-11, }, 	/* PCIRQ2 */
+	{  9, 4,  4, 0x0f- 9, }, 	/* PCIRQ1 */
+	{  7, 4,  0, 0x0f- 7, }, 	/* PCIRQ0 */
+	/* #2, #13 are allocated for SLOT IRQ #1 and #2 (for now) */
+	/* NOTE: #2 and #13 are not used on PC */
+	{ 13, 6,  4, 0x0f-13, }, 	/* SLOTIRQ2 */
+	{  2, 6,  0, 0x0f- 2, }, 	/* SLOTIRQ1 */
+#endif
+};
+
+static unsigned long ipr_offsets[] = {
+	BCR_ILCRA,
+	BCR_ILCRB,
+	BCR_ILCRC,
+	BCR_ILCRD,
+	BCR_ILCRE,
+	BCR_ILCRF,
+	BCR_ILCRG,
+};
+
+static struct ipr_desc ipr_irq_desc = {
+	.ipr_offsets	= ipr_offsets,
+	.nr_offsets	= ARRAY_SIZE(ipr_offsets),
+
+	.ipr_data	= ipr_irq_table,
+	.nr_irqs	= ARRAY_SIZE(ipr_irq_table),
+	.chip = {
+		.name	= "IPR-se770x",
+	},
+};
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_se_IRQ(void)
+{
+	/* Disable all interrupts */
+	ctrl_outw(0, BCR_ILCRA);
+	ctrl_outw(0, BCR_ILCRB);
+	ctrl_outw(0, BCR_ILCRC);
+	ctrl_outw(0, BCR_ILCRD);
+	ctrl_outw(0, BCR_ILCRE);
+	ctrl_outw(0, BCR_ILCRF);
+	ctrl_outw(0, BCR_ILCRG);
+
+	register_ipr_controller(&ipr_irq_desc);
+}
diff --git a/arch/sh/boards/mach-se/770x/setup.c b/arch/sh/boards/mach-se/770x/setup.c
new file mode 100644
index 000000000000..6c64d774da3a
--- /dev/null
+++ b/arch/sh/boards/mach-se/770x/setup.c
@@ -0,0 +1,222 @@
+/*
+ * linux/arch/sh/boards/se/770x/setup.c
+ *
+ * Copyright (C) 2000  Kazumoto Kojima
+ *
+ * Hitachi SolutionEngine Support.
+ *
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <asm/machvec.h>
+#include <asm/se.h>
+#include <asm/io.h>
+#include <asm/smc37c93x.h>
+#include <asm/heartbeat.h>
+
+/*
+ * Configure the Super I/O chip
+ */
+static void __init smsc_config(int index, int data)
+{
+	outb_p(index, INDEX_PORT);
+	outb_p(data, DATA_PORT);
+}
+
+/* XXX: Another candidate for a more generic cchip machine vector */
+static void __init smsc_setup(char **cmdline_p)
+{
+	outb_p(CONFIG_ENTER, CONFIG_PORT);
+	outb_p(CONFIG_ENTER, CONFIG_PORT);
+
+	/* FDC */
+	smsc_config(CURRENT_LDN_INDEX, LDN_FDC);
+	smsc_config(ACTIVATE_INDEX, 0x01);
+	smsc_config(IRQ_SELECT_INDEX, 6); /* IRQ6 */
+
+	/* AUXIO (GPIO): to use IDE1 */
+	smsc_config(CURRENT_LDN_INDEX, LDN_AUXIO);
+	smsc_config(GPIO46_INDEX, 0x00); /* nIOROP */
+	smsc_config(GPIO47_INDEX, 0x00); /* nIOWOP */
+
+	/* COM1 */
+	smsc_config(CURRENT_LDN_INDEX, LDN_COM1);
+	smsc_config(ACTIVATE_INDEX, 0x01);
+	smsc_config(IO_BASE_HI_INDEX, 0x03);
+	smsc_config(IO_BASE_LO_INDEX, 0xf8);
+	smsc_config(IRQ_SELECT_INDEX, 4); /* IRQ4 */
+
+	/* COM2 */
+	smsc_config(CURRENT_LDN_INDEX, LDN_COM2);
+	smsc_config(ACTIVATE_INDEX, 0x01);
+	smsc_config(IO_BASE_HI_INDEX, 0x02);
+	smsc_config(IO_BASE_LO_INDEX, 0xf8);
+	smsc_config(IRQ_SELECT_INDEX, 3); /* IRQ3 */
+
+	/* RTC */
+	smsc_config(CURRENT_LDN_INDEX, LDN_RTC);
+	smsc_config(ACTIVATE_INDEX, 0x01);
+	smsc_config(IRQ_SELECT_INDEX, 8); /* IRQ8 */
+
+	/* XXX: PARPORT, KBD, and MOUSE will come here... */
+	outb_p(CONFIG_EXIT, CONFIG_PORT);
+}
+
+
+static struct resource cf_ide_resources[] = {
+	[0] = {
+		.start  = PA_MRSHPC_IO + 0x1f0,
+		.end    = PA_MRSHPC_IO + 0x1f0 + 8,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = PA_MRSHPC_IO + 0x1f0 + 0x206,
+		.end    = PA_MRSHPC_IO + 0x1f0 + 8 + 0x206 + 8,
+		.flags  = IORESOURCE_MEM,
+	},
+	[2] = {
+		.start  = IRQ_CFCARD,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device cf_ide_device  = {
+	.name           = "pata_platform",
+	.id             = -1,
+	.num_resources  = ARRAY_SIZE(cf_ide_resources),
+	.resource       = cf_ide_resources,
+};
+
+static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
+
+static struct heartbeat_data heartbeat_data = {
+	.bit_pos	= heartbeat_bit_pos,
+	.nr_bits	= ARRAY_SIZE(heartbeat_bit_pos),
+	.regsize	= 16,
+};
+
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start	= PA_LED,
+		.end	= PA_LED,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.dev	= {
+		.platform_data	= &heartbeat_data,
+	},
+	.num_resources	= ARRAY_SIZE(heartbeat_resources),
+	.resource	= heartbeat_resources,
+};
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7710) ||\
+	defined(CONFIG_CPU_SUBTYPE_SH7712)
+/* SH771X Ethernet driver */
+static struct resource sh_eth0_resources[] = {
+	[0] = {
+		.start = SH_ETH0_BASE,
+		.end = SH_ETH0_BASE + 0x1B8,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = SH_ETH0_IRQ,
+		.end = SH_ETH0_IRQ,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sh_eth0_device = {
+	.name = "sh-eth",
+	.id	= 0,
+	.dev = {
+		.platform_data = PHY_ID,
+	},
+	.num_resources = ARRAY_SIZE(sh_eth0_resources),
+	.resource = sh_eth0_resources,
+};
+
+static struct resource sh_eth1_resources[] = {
+	[0] = {
+		.start = SH_ETH1_BASE,
+		.end = SH_ETH1_BASE + 0x1B8,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = SH_ETH1_IRQ,
+		.end = SH_ETH1_IRQ,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sh_eth1_device = {
+	.name = "sh-eth",
+	.id	= 1,
+	.dev = {
+		.platform_data = PHY_ID,
+	},
+	.num_resources = ARRAY_SIZE(sh_eth1_resources),
+	.resource = sh_eth1_resources,
+};
+#endif
+
+static struct platform_device *se_devices[] __initdata = {
+	&heartbeat_device,
+	&cf_ide_device,
+#if defined(CONFIG_CPU_SUBTYPE_SH7710) ||\
+	defined(CONFIG_CPU_SUBTYPE_SH7712)
+	&sh_eth0_device,
+	&sh_eth1_device,
+#endif
+};
+
+static int __init se_devices_setup(void)
+{
+	return platform_add_devices(se_devices, ARRAY_SIZE(se_devices));
+}
+device_initcall(se_devices_setup);
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_se __initmv = {
+	.mv_name		= "SolutionEngine",
+	.mv_setup		= smsc_setup,
+#if defined(CONFIG_CPU_SH4)
+	.mv_nr_irqs		= 48,
+#elif defined(CONFIG_CPU_SUBTYPE_SH7708)
+	.mv_nr_irqs		= 32,
+#elif defined(CONFIG_CPU_SUBTYPE_SH7709)
+	.mv_nr_irqs		= 61,
+#elif defined(CONFIG_CPU_SUBTYPE_SH7705)
+	.mv_nr_irqs		= 86,
+#elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
+	.mv_nr_irqs             = 104,
+#endif
+
+	.mv_inb			= se_inb,
+	.mv_inw			= se_inw,
+	.mv_inl			= se_inl,
+	.mv_outb		= se_outb,
+	.mv_outw		= se_outw,
+	.mv_outl		= se_outl,
+
+	.mv_inb_p		= se_inb_p,
+	.mv_inw_p		= se_inw,
+	.mv_inl_p		= se_inl,
+	.mv_outb_p		= se_outb_p,
+	.mv_outw_p		= se_outw,
+	.mv_outl_p		= se_outl,
+
+	.mv_insb		= se_insb,
+	.mv_insw		= se_insw,
+	.mv_insl		= se_insl,
+	.mv_outsb		= se_outsb,
+	.mv_outsw		= se_outsw,
+	.mv_outsl		= se_outsl,
+
+	.mv_init_irq		= init_se_IRQ,
+};