Merge commit 'c039c332f23e794deb6d6f37b9f07ff3b27fb2cf' into md

Pull in pre-requisites for adding raid10 support to dm-raid.

1 files changed, 67 insertions, 33 deletions

diff --git a/arch/powerpc/platforms/83xx/km83xx.c b/arch/powerpc/platforms/83xx/km83xx.c
index a266ba876863..89923d723349 100644
--- a/arch/powerpc/platforms/83xx/km83xx.c
+++ b/arch/powerpc/platforms/83xx/km83xx.c
@@ -3,7 +3,7 @@
  * Author: Heiko Schocher <hs@denx.de>
  *
  * Description:
- * Keymile KMETER1 board specific routines.
+ * Keymile 83xx platform specific routines.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -70,54 +70,88 @@ static void __init mpc83xx_km_setup_arch(void)
 		for_each_node_by_name(np, "spi")
 			par_io_of_config(np);
 
-		for (np = NULL; (np = of_find_node_by_name(np, "ucc")) != NULL;)
+		for_each_node_by_name(np, "ucc")
 			par_io_of_config(np);
 	}
 
 	np = of_find_compatible_node(NULL, "network", "ucc_geth");
 	if (np != NULL) {
-		uint svid;
+		/*
+		 * handle mpc8360E Erratum QE_ENET10:
+		 * RGMII AC values do not meet the specification
+		 */
+		uint svid = mfspr(SPRN_SVR);
+		struct	device_node *np_par;
+		struct	resource res;
+		void	__iomem *base;
+		int	ret;
+
+		np_par = of_find_node_by_name(NULL, "par_io");
+		if (np_par == NULL) {
+			printk(KERN_WARNING "%s couldn;t find par_io node\n",
+				__func__);
+			return;
+		}
+		/* Map Parallel I/O ports registers */
+		ret = of_address_to_resource(np_par, 0, &res);
+		if (ret) {
+			printk(KERN_WARNING "%s couldn;t map par_io registers\n",
+				__func__);
+			return;
+		}
+
+		base = ioremap(res.start, res.end - res.start + 1);
+
+		/*
+		 * set output delay adjustments to default values according
+		 * table 5 in Errata Rev. 5, 9/2011:
+		 *
+		 * write 0b01 to UCC1 bits 18:19
+		 * write 0b01 to UCC2 option 1 bits 4:5
+		 * write 0b01 to UCC2 option 2 bits 16:17
+		 */
+		clrsetbits_be32((base + 0xa8), 0x0c00f000, 0x04005000);
+
+		/*
+		 * set output delay adjustments to default values according
+		 * table 3-13 in Reference Manual Rev.3 05/2010:
+		 *
+		 * write 0b01 to UCC2 option 2 bits 16:17
+		 * write 0b0101 to UCC1 bits 20:23
+		 * write 0b0101 to UCC2 option 1 bits 24:27
+		 */
+		clrsetbits_be32((base + 0xac), 0x0000cff0, 0x00004550);
 
-		/* handle mpc8360ea rev.2.1 erratum 2: RGMII Timing */
-		svid = mfspr(SPRN_SVR);
 		if (SVR_REV(svid) == 0x0021) {
-			struct	device_node *np_par;
-			struct	resource res;
-			void	__iomem *base;
-			int	ret;
-
-			np_par = of_find_node_by_name(NULL, "par_io");
-			if (np_par == NULL) {
-				printk(KERN_WARNING "%s couldn;t find par_io node\n",
-					__func__);
-				return;
-			}
-			/* Map Parallel I/O ports registers */
-			ret = of_address_to_resource(np_par, 0, &res);
-			if (ret) {
-				printk(KERN_WARNING "%s couldn;t map par_io registers\n",
-					__func__);
-				return;
-			}
-			base = ioremap(res.start, resource_size(&res));
+			/*
+			 * UCC2 option 1: write 0b1010 to bits 24:27
+			 * at address IMMRBAR+0x14AC
+			 */
+			clrsetbits_be32((base + 0xac), 0x000000f0, 0x000000a0);
+		} else if (SVR_REV(svid) == 0x0020) {
+			/*
+			 * UCC1: write 0b11 to bits 18:19
+			 * at address IMMRBAR+0x14A8
+			 */
+			setbits32((base + 0xa8), 0x00003000);
 
 			/*
-			 * IMMR + 0x14A8[4:5] = 11 (clk delay for UCC 2)
-			 * IMMR + 0x14A8[18:19] = 11 (clk delay for UCC 1)
+			 * UCC2 option 1: write 0b11 to bits 4:5
+			 * at address IMMRBAR+0x14A8
 			 */
-			setbits32((base + 0xa8), 0x0c003000);
+			setbits32((base + 0xa8), 0x0c000000);
 
 			/*
-			 * IMMR + 0x14AC[20:27] = 10101010
-			 * (data delay for both UCC's)
+			 * UCC2 option 2: write 0b11 to bits 16:17
+			 * at address IMMRBAR+0x14AC
 			 */
-			clrsetbits_be32((base + 0xac), 0xff0, 0xaa0);
-			iounmap(base);
-			of_node_put(np_par);
+			setbits32((base + 0xac), 0x0000c000);
 		}
+		iounmap(base);
+		of_node_put(np_par);
 		of_node_put(np);
 	}
-#endif				/* CONFIG_QUICC_ENGINE */
+#endif	/* CONFIG_QUICC_ENGINE */
 }
 
 machine_device_initcall(mpc83xx_km, mpc83xx_declare_of_platform_devices);