Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC platform updates from Olof Johansson:
 "SoC platform changes. Main theme this merge window:

   - The Netx platform (Netx 100/500) platform is removed by Linus
     Walleij-- the SoC doesn't have active maintainers with hardware,
     and in discussions with the vendor the agreement was that it's OK
     to remove.

   - Russell King has a series of patches that cleans up and refactors
     SA1101 and RiscPC support"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits)
  ARM: stm32: use "depends on" instead of "if" after prompt
  ARM: sa1100: convert to common clock framework
  ARM: exynos: Cleanup cppcheck shifting warning
  ARM: pxa/lubbock: remove lubbock_set_misc_wr() from global view
  ARM: exynos: Only build MCPM support if used
  arm: add missing include platform-data/atmel.h
  ARM: davinci: Use GPIO lookup table for DA850 LEDs
  ARM: OMAP2: drop explicit assembler architecture
  ARM: use arch_extension directive instead of arch argument
  ARM: imx: Switch imx7d to imx-cpufreq-dt for speed-grading
  ARM: bcm: Enable PINCTRL for ARCH_BRCMSTB
  ARM: bcm: Enable ARCH_HAS_RESET_CONTROLLER for ARCH_BRCMSTB
  ARM: riscpc: enable chained scatterlist support
  ARM: riscpc: reduce IRQ handling code
  ARM: riscpc: move RiscPC assembly files from arch/arm/lib to mach-rpc
  ARM: riscpc: parse video information from tagged list
  ARM: riscpc: add ecard quirk for Atomwide 3port serial card
  MAINTAINERS: mvebu: Add git entry
  soc: ti: pm33xx: Add a print while entering RTC only mode with DDR in self-refresh
  ARM: OMAP2+: Make some variables static
  ...

57 files changed, 439 insertions, 917 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 600c5ba1af41..33b00579beff 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -377,15 +377,6 @@ config ARCH_FOOTBRIDGE
 	  Support for systems based on the DC21285 companion chip
 	  ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
 
-config ARCH_NETX
-	bool "Hilscher NetX based"
-	select ARM_VIC
-	select CLKSRC_MMIO
-	select CPU_ARM926T
-	select GENERIC_CLOCKEVENTS
-	help
-	  This enables support for systems based on the Hilscher NetX Soc
-
 config ARCH_IOP13XX
 	bool "IOP13xx-based"
 	depends on MMU
@@ -531,7 +522,7 @@ config ARCH_RPC
 	select ARCH_ACORN
 	select ARCH_MAY_HAVE_PC_FDC
 	select ARCH_SPARSEMEM_ENABLE
-	select ARCH_USES_GETTIMEOFFSET
+	select ARM_HAS_SG_CHAIN
 	select CPU_SA110
 	select FIQ
 	select HAVE_IDE
@@ -552,6 +543,7 @@ config ARCH_SA1100
 	select CLKSRC_MMIO
 	select CLKSRC_PXA
 	select TIMER_OF if OF
+	select COMMON_CLK
 	select CPU_FREQ
 	select CPU_SA1100
 	select GENERIC_CLOCKEVENTS
@@ -770,8 +762,6 @@ source "arch/arm/mach-mvebu/Kconfig"
 
 source "arch/arm/mach-mxs/Kconfig"
 
-source "arch/arm/mach-netx/Kconfig"
-
 source "arch/arm/mach-nomadik/Kconfig"
 
 source "arch/arm/mach-npcm/Kconfig"
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 9a8862fee738..c929bea9a9ff 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -638,13 +638,6 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  for Mediatek mt8135 based platforms on UART3.
 
-	config DEBUG_NETX_UART
-		bool "Kernel low-level debugging messages via NetX UART"
-		depends on ARCH_NETX
-		help
-		  Say Y here if you want kernel low-level debugging support
-		  on Hilscher NetX based platforms.
-
 	config DEBUG_NOMADIK_UART
 		bool "Kernel low-level debugging messages via NOMADIK UART"
 		depends on ARCH_NOMADIK
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index f863c6935d0e..c3624ca6c0bc 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -191,7 +191,6 @@ machine-$(CONFIG_ARCH_MXC)		+= imx
 machine-$(CONFIG_ARCH_MEDIATEK)		+= mediatek
 machine-$(CONFIG_ARCH_MILBEAUT)		+= milbeaut
 machine-$(CONFIG_ARCH_MXS)		+= mxs
-machine-$(CONFIG_ARCH_NETX)		+= netx
 machine-$(CONFIG_ARCH_NOMADIK)		+= nomadik
 machine-$(CONFIG_ARCH_NPCM)		+= npcm
 machine-$(CONFIG_ARCH_NSPIRE)		+= nspire
diff --git a/arch/arm/configs/netx_defconfig b/arch/arm/configs/netx_defconfig
deleted file mode 100644
index cc5c5f9ef720..000000000000
--- a/arch/arm/configs/netx_defconfig
+++ /dev/null
@@ -1,80 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_ARCH_NETX=y
-CONFIG_MACH_NXDKN=y
-CONFIG_MACH_NXDB500=y
-CONFIG_MACH_NXEB500HMI=y
-CONFIG_PREEMPT=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttySMX0,115200"
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=m
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_NET_IPGRE=m
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=y
-CONFIG_INET_ESP=y
-CONFIG_INET_IPCOMP=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_NETFILTER=y
-CONFIG_NET_PKTGEN=m
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PLATRAM=y
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_NETX=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_SERIAL_NETX=y
-CONFIG_SERIAL_NETX_CONSOLE=y
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FB_ARMCLCD=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-CONFIG_RTC_CLASS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRC_CCITT=m
-CONFIG_LIBCRC32C=m
diff --git a/arch/arm/include/debug/netx.S b/arch/arm/include/debug/netx.S
deleted file mode 100644
index 08afc58885d3..000000000000
--- a/arch/arm/include/debug/netx.S
+++ /dev/null
@@ -1,32 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
-*/
-
-#define UART_DATA 0
-#define UART_FLAG 0x18
-#define UART_FLAG_BUSY (1 << 3)
-
-		.macro	addruart, rp, rv, tmp
-		ldr	\rp, =CONFIG_DEBUG_UART_PHYS
-		ldr	\rv, =CONFIG_DEBUG_UART_VIRT
-		.endm
-
-		.macro	senduart,rd,rx
-		str	\rd, [\rx, #UART_DATA]
-		.endm
-
-		.macro	busyuart,rd,rx
-1002:		ldr	\rd, [\rx, #UART_FLAG]
-		tst	\rd, #UART_FLAG_BUSY
-		bne	1002b
-		.endm
-
-		.macro	waituart,rd,rx
-1001:		ldr	\rd, [\rx, #UART_FLAG]
-		tst	\rd, #UART_FLAG_BUSY
-		bne	1001b
-		.endm
diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
index 0bff0176db2c..b25c54585048 100644
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -31,7 +31,6 @@ else
 endif
 
 ifeq ($(CONFIG_ARCH_RPC),y)
-  lib-y				+= ecard.o io-acorn.o floppydma.o
   AFLAGS_delay-loop.o		+= -march=armv4
 endif
 
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index da85e64143e9..d5af6aedc02c 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -15,6 +15,7 @@
 #include <linux/suspend.h>
 
 #include <linux/clk/at91_pmc.h>
+#include <linux/platform_data/atmel.h>
 
 #include <asm/cacheflush.h>
 #include <asm/fncpy.h>
diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
index 4ef1e55f4a0b..5e5f1fabc3d4 100644
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -208,6 +208,7 @@ config ARCH_BCM_63XX
 config ARCH_BRCMSTB
 	bool "Broadcom BCM7XXX based boards"
 	depends on ARCH_MULTI_V7
+	select ARCH_HAS_RESET_CONTROLLER
 	select ARM_GIC
 	select ARM_ERRATA_798181 if SMP
 	select HAVE_ARM_ARCH_TIMER
@@ -217,6 +218,7 @@ config ARCH_BRCMSTB
 	select ZONE_DMA if ARM_LPAE
 	select SOC_BRCMSTB
 	select SOC_BUS
+	select PINCTRL
 	help
 	  Say Y if you intend to run the kernel on a Broadcom ARM-based STB
 	  chipset.
diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile
index 8fd23b263c60..b59c813b1af4 100644
--- a/arch/arm/mach-bcm/Makefile
+++ b/arch/arm/mach-bcm/Makefile
@@ -40,9 +40,6 @@ obj-$(CONFIG_ARCH_BCM_MOBILE_L2_CACHE) += kona_l2_cache.o
 
 # Support for secure monitor traps
 obj-$(CONFIG_ARCH_BCM_MOBILE_SMC) += bcm_kona_smc.o
-ifeq ($(call as-instr,.arch_extension sec,as_has_sec),as_has_sec)
-CFLAGS_bcm_kona_smc.o		+= -Wa,-march=armv7-a+sec -DREQUIRES_SEC
-endif
 
 # BCM2835
 obj-$(CONFIG_ARCH_BCM2835)	+= board_bcm2835.o
diff --git a/arch/arm/mach-bcm/bcm63xx_smp.c b/arch/arm/mach-bcm/bcm63xx_smp.c
index 83dd0c10fa47..641e1f8fcf5e 100644
--- a/arch/arm/mach-bcm/bcm63xx_smp.c
+++ b/arch/arm/mach-bcm/bcm63xx_smp.c
@@ -141,6 +141,7 @@ static int bcm63138_smp_boot_secondary(unsigned int cpu,
 	 * return
 	 */
 	ret = bcm63xx_pmb_power_on_cpu(dn);
+	of_node_put(dn);
 	if (ret)
 		goto out;
 out:
diff --git a/arch/arm/mach-bcm/bcm_kona_smc.c b/arch/arm/mach-bcm/bcm_kona_smc.c
index a55a7ecf146a..541e850a736c 100644
--- a/arch/arm/mach-bcm/bcm_kona_smc.c
+++ b/arch/arm/mach-bcm/bcm_kona_smc.c
@@ -125,9 +125,7 @@ static int bcm_kona_do_smc(u32 service_id, u32 buffer_phys)
 		__asmeq("%2", "r4")
 		__asmeq("%3", "r5")
 		__asmeq("%4", "r6")
-#ifdef REQUIRES_SEC
 		".arch_extension sec\n"
-#endif
 		"	smc    #0\n"
 		: "=r" (ip), "=r" (r0)
 		: "r" (r4), "r" (r5), "r" (r6)
diff --git a/arch/arm/mach-bcm/board_bcm281xx.c b/arch/arm/mach-bcm/board_bcm281xx.c
index b81bb386951d..1238ac801530 100644
--- a/arch/arm/mach-bcm/board_bcm281xx.c
+++ b/arch/arm/mach-bcm/board_bcm281xx.c
@@ -38,6 +38,7 @@ static void bcm281xx_restart(enum reboot_mode mode, const char *cmd)
 		return;
 	}
 	base = of_iomap(np_wdog, 0);
+	of_node_put(np_wdog);
 	if (!base) {
 		pr_emerg("Couldn't map brcm,kona-wdt\n");
 		return;
diff --git a/arch/arm/mach-bcm/platsmp-brcmstb.c b/arch/arm/mach-bcm/platsmp-brcmstb.c
index 12379960e982..4555f21e7077 100644
--- a/arch/arm/mach-bcm/platsmp-brcmstb.c
+++ b/arch/arm/mach-bcm/platsmp-brcmstb.c
@@ -334,11 +334,14 @@ static void __init brcmstb_cpu_ctrl_setup(unsigned int max_cpus)
 
 	rc = setup_hifcpubiuctrl_regs(np);
 	if (rc)
-		return;
+		goto out_put_node;
 
 	rc = setup_hifcont_regs(np);
 	if (rc)
-		return;
+		goto out_put_node;
+
+out_put_node:
+	of_node_put(np);
 }
 
 static int brcmstb_boot_secondary(unsigned int cpu, struct task_struct *idle)
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 31ae3be5741d..0628e7d7dcf3 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -631,13 +631,12 @@ static void da850_evm_bb_keys_init(unsigned gpio)
 	}
 }
 
-#define DA850_N_BB_USER_LED	2
-
 static struct gpio_led da850_evm_bb_leds[] = {
-	[0 ... DA850_N_BB_USER_LED - 1] = {
-		.active_low = 1,
-		.gpio = -1, /* assigned at runtime */
-		.name = NULL, /* assigned at runtime */
+	{
+		.name = "user_led2",
+	},
+	{
+		.name = "user_led1",
 	},
 };
 
@@ -646,6 +645,20 @@ static struct gpio_led_platform_data da850_evm_bb_leds_pdata = {
 	.num_leds = ARRAY_SIZE(da850_evm_bb_leds),
 };
 
+static struct gpiod_lookup_table da850_evm_bb_leds_gpio_table = {
+	.dev_id = "leds-gpio",
+	.table = {
+		GPIO_LOOKUP_IDX("i2c-bb-expander",
+				DA850_EVM_BB_EXP_USER_LED2, NULL,
+				0, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("i2c-bb-expander",
+				DA850_EVM_BB_EXP_USER_LED2 + 1, NULL,
+				1, GPIO_ACTIVE_LOW),
+
+		{ },
+	},
+};
+
 static struct platform_device da850_evm_bb_leds_device = {
 	.name		= "leds-gpio",
 	.id		= -1,
@@ -654,20 +667,6 @@ static struct platform_device da850_evm_bb_leds_device = {
 	}
 };
 
-static void da850_evm_bb_leds_init(unsigned gpio)
-{
-	int i;
-	struct gpio_led *led;
-
-	for (i = 0; i < DA850_N_BB_USER_LED; i++) {
-		led = &da850_evm_bb_leds[i];
-
-		led->gpio = gpio + DA850_EVM_BB_EXP_USER_LED2 + i;
-		led->name =
-			da850_evm_bb_exp[DA850_EVM_BB_EXP_USER_LED2 + i];
-	}
-}
-
 static int da850_evm_bb_expander_setup(struct i2c_client *client,
 						unsigned gpio, unsigned ngpio,
 						void *c)
@@ -685,7 +684,7 @@ static int da850_evm_bb_expander_setup(struct i2c_client *client,
 		goto io_exp_setup_sw_fail;
 	}
 
-	da850_evm_bb_leds_init(gpio);
+	gpiod_add_lookup_table(&da850_evm_bb_leds_gpio_table);
 	ret = platform_device_register(&da850_evm_bb_leds_device);
 	if (ret) {
 		pr_warn("Could not register baseboard GPIO expander LEDs");
@@ -729,10 +728,12 @@ static struct i2c_board_info __initdata da850_evm_i2c_devices[] = {
 	},
 	{
 		I2C_BOARD_INFO("tca6416", 0x20),
+		.dev_name = "ui-expander",
 		.platform_data = &da850_evm_ui_expander_info,
 	},
 	{
 		I2C_BOARD_INFO("tca6416", 0x21),
+		.dev_name = "bb-expander",
 		.platform_data = &da850_evm_bb_expander_info,
 	},
 };
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 1c518b8ee520..d7422233a130 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -49,6 +49,7 @@ config S5P_DEV_MFC
 
 config ARCH_EXYNOS3
 	bool "SAMSUNG EXYNOS3"
+	default y
 	select ARM_CPU_SUSPEND if PM
 	help
 	  Samsung EXYNOS3 (Cortex-A7) SoC based systems
@@ -106,7 +107,7 @@ config SOC_EXYNOS5420
 	bool "SAMSUNG EXYNOS5420"
 	default y
 	depends on ARCH_EXYNOS5
-	select MCPM if SMP
+	select EXYNOS_MCPM if SMP
 	select ARM_CCI400_PORT_CTRL
 	select ARM_CPU_SUSPEND
 
@@ -115,6 +116,10 @@ config SOC_EXYNOS5800
 	default y
 	depends on SOC_EXYNOS5420
 
+config EXYNOS_MCPM
+	bool
+	select MCPM
+
 config EXYNOS_CPU_SUSPEND
 	bool
 	select ARM_CPU_SUSPEND
diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile
index 264dbaa89c3d..0fd3fcf8bfb0 100644
--- a/arch/arm/mach-exynos/Makefile
+++ b/arch/arm/mach-exynos/Makefile
@@ -14,9 +14,5 @@ obj-$(CONFIG_PM_SLEEP)		+= suspend.o
 
 obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o
 
-plus_sec := $(call as-instr,.arch_extension sec,+sec)
-AFLAGS_exynos-smc.o		:=-Wa,-march=armv7-a$(plus_sec)
-AFLAGS_sleep.o			:=-Wa,-march=armv7-a$(plus_sec)
-
-obj-$(CONFIG_MCPM)		+= mcpm-exynos.o
+obj-$(CONFIG_EXYNOS_MCPM)	+= mcpm-exynos.o
 CFLAGS_mcpm-exynos.o		+= -march=armv7-a
diff --git a/arch/arm/mach-exynos/exynos-smc.S b/arch/arm/mach-exynos/exynos-smc.S
index d259532ba937..6da31e6a7acb 100644
--- a/arch/arm/mach-exynos/exynos-smc.S
+++ b/arch/arm/mach-exynos/exynos-smc.S
@@ -10,7 +10,8 @@
 /*
  * Function signature: void exynos_smc(u32 cmd, u32 arg1, u32 arg2, u32 arg3)
  */
-
+	.arch armv7-a
+	.arch_extension sec
 ENTRY(exynos_smc)
 	stmfd	sp!, {r4-r11, lr}
 	dsb
diff --git a/arch/arm/mach-exynos/sleep.S b/arch/arm/mach-exynos/sleep.S
index 2783c3a0c06a..ed93f91853b8 100644
--- a/arch/arm/mach-exynos/sleep.S
+++ b/arch/arm/mach-exynos/sleep.S
@@ -44,7 +44,8 @@ ENTRY(exynos_cpu_resume)
 ENDPROC(exynos_cpu_resume)
 
 	.align
-
+	.arch armv7-a
+	.arch_extension sec
 ENTRY(exynos_cpu_resume_ns)
 	mrc	p15, 0, r0, c0, c0, 0
 	ldr	r1, =CPU_MASK
diff --git a/arch/arm/mach-exynos/suspend.c b/arch/arm/mach-exynos/suspend.c
index be122af0de8f..6a0d3448ea00 100644
--- a/arch/arm/mach-exynos/suspend.c
+++ b/arch/arm/mach-exynos/suspend.c
@@ -268,7 +268,7 @@ static int exynos5420_cpu_suspend(unsigned long arg)
 	unsigned int cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
 	unsigned int cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
 
-	if (IS_ENABLED(CONFIG_MCPM)) {
+	if (IS_ENABLED(CONFIG_EXYNOS_MCPM)) {
 		mcpm_set_entry_vector(cpu, cluster, exynos_cpu_resume);
 		mcpm_cpu_suspend();
 	}
@@ -285,7 +285,7 @@ static void exynos_pm_set_wakeup_mask(void)
 	 * Set wake-up mask registers
 	 * EXYNOS_EINT_WAKEUP_MASK is set by pinctrl driver in late suspend.
 	 */
-	pmu_raw_writel(exynos_irqwake_intmask & ~(1 << 31), S5P_WAKEUP_MASK);
+	pmu_raw_writel(exynos_irqwake_intmask & ~BIT(31), S5P_WAKEUP_MASK);
 }
 
 static void exynos_pm_enter_sleep_mode(void)
@@ -351,7 +351,7 @@ static void exynos5420_pm_prepare(void)
 	exynos_pm_enter_sleep_mode();
 
 	/* ensure at least INFORM0 has the resume address */
-	if (IS_ENABLED(CONFIG_MCPM))
+	if (IS_ENABLED(CONFIG_EXYNOS_MCPM))
 		pmu_raw_writel(__pa_symbol(mcpm_entry_point), S5P_INFORM0);
 
 	tmp = pmu_raw_readl(EXYNOS_L2_OPTION(0));
@@ -455,7 +455,7 @@ static void exynos5420_prepare_pm_resume(void)
 	mpidr = read_cpuid_mpidr();
 	cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
 
-	if (IS_ENABLED(CONFIG_MCPM))
+	if (IS_ENABLED(CONFIG_EXYNOS_MCPM))
 		WARN_ON(mcpm_cpu_powered_up());
 
 	if (IS_ENABLED(CONFIG_HW_PERF_EVENTS) && cluster != 0) {
diff --git a/arch/arm/mach-highbank/Makefile b/arch/arm/mach-highbank/Makefile
index 7e6732c16862..71cc68041d92 100644
--- a/arch/arm/mach-highbank/Makefile
+++ b/arch/arm/mach-highbank/Makefile
@@ -1,7 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0-only
 obj-y					:= highbank.o system.o smc.o
 
-plus_sec := $(call as-instr,.arch_extension sec,+sec)
-AFLAGS_smc.o				:=-Wa,-march=armv7-a$(plus_sec)
-
 obj-$(CONFIG_PM_SLEEP)			+= pm.o
diff --git a/arch/arm/mach-highbank/smc.S b/arch/arm/mach-highbank/smc.S
index b16c0442e812..78b3f19e7f37 100644
--- a/arch/arm/mach-highbank/smc.S
+++ b/arch/arm/mach-highbank/smc.S
@@ -13,7 +13,8 @@
  * the monitor API number.
  * Function signature : void highbank_smc1(u32 fn, u32 arg)
  */
-
+	.arch armv7-a
+	.arch_extension sec
 ENTRY(highbank_smc1)
 	stmfd   sp!, {r4-r11, lr}
 	mov	r12, r0
diff --git a/arch/arm/mach-imx/cpuidle-imx6q.c b/arch/arm/mach-imx/cpuidle-imx6q.c
index a2441ed6b673..39a7d9393641 100644
--- a/arch/arm/mach-imx/cpuidle-imx6q.c
+++ b/arch/arm/mach-imx/cpuidle-imx6q.c
@@ -14,22 +14,22 @@
 #include "hardware.h"
 
 static int num_idle_cpus = 0;
-static DEFINE_SPINLOCK(cpuidle_lock);
+static DEFINE_RAW_SPINLOCK(cpuidle_lock);
 
 static int imx6q_enter_wait(struct cpuidle_device *dev,
 			    struct cpuidle_driver *drv, int index)
 {
-	spin_lock(&cpuidle_lock);
+	raw_spin_lock(&cpuidle_lock);
 	if (++num_idle_cpus == num_online_cpus())
 		imx6_set_lpm(WAIT_UNCLOCKED);
-	spin_unlock(&cpuidle_lock);
+	raw_spin_unlock(&cpuidle_lock);
 
 	cpu_do_idle();
 
-	spin_lock(&cpuidle_lock);
+	raw_spin_lock(&cpuidle_lock);
 	if (num_idle_cpus-- == num_online_cpus())
 		imx6_set_lpm(WAIT_CLOCKED);
-	spin_unlock(&cpuidle_lock);
+	raw_spin_unlock(&cpuidle_lock);
 
 	return index;
 }
diff --git a/arch/arm/mach-imx/mach-imx7d.c b/arch/arm/mach-imx/mach-imx7d.c
index dec5d90a66ce..95713450591a 100644
--- a/arch/arm/mach-imx/mach-imx7d.c
+++ b/arch/arm/mach-imx/mach-imx7d.c
@@ -94,6 +94,12 @@ static void __init imx7d_init_machine(void)
 	imx7d_enet_init();
 }
 
+static void __init imx7d_init_late(void)
+{
+	if (IS_ENABLED(CONFIG_ARM_IMX_CPUFREQ_DT))
+		platform_device_register_simple("imx-cpufreq-dt", -1, NULL, 0);
+}
+
 static void __init imx7d_init_irq(void)
 {
 	imx_init_revision_from_anatop();
@@ -110,5 +116,6 @@ static const char *const imx7d_dt_compat[] __initconst = {
 DT_MACHINE_START(IMX7D, "Freescale i.MX7 Dual (Device Tree)")
 	.init_irq	= imx7d_init_irq,
 	.init_machine	= imx7d_init_machine,
+	.init_late      = imx7d_init_late,
 	.dt_compat	= imx7d_dt_compat,
 MACHINE_END
diff --git a/arch/arm/mach-keystone/Makefile b/arch/arm/mach-keystone/Makefile
index f8b0dccac8dc..739b38be5696 100644
--- a/arch/arm/mach-keystone/Makefile
+++ b/arch/arm/mach-keystone/Makefile
@@ -1,9 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0
 obj-y					:= keystone.o smc.o
 
-plus_sec := $(call as-instr,.arch_extension sec,+sec)
-AFLAGS_smc.o				:=-Wa,-march=armv7-a$(plus_sec)
-
 obj-$(CONFIG_SMP)			+= platsmp.o
 
 # PM domain driver for Keystone SOCs
diff --git a/arch/arm/mach-keystone/smc.S b/arch/arm/mach-keystone/smc.S
index 76d0bf6ac73c..21ef75cf5370 100644
--- a/arch/arm/mach-keystone/smc.S
+++ b/arch/arm/mach-keystone/smc.S
@@ -18,6 +18,7 @@
  *
  * Return: Non zero value on failure
  */
+	.arch_extension sec
 ENTRY(keystone_cpu_smc)
 	stmfd   sp!, {r4-r11, lr}
 	smc	#0
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 85d1b13c9215..600650551621 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -41,18 +41,10 @@ obj-$(CONFIG_SOC_OMAP5)			+= $(omap-4-5-common) $(smp-y) sleep44xx.o
 obj-$(CONFIG_SOC_AM43XX)		+= $(omap-4-5-common)
 obj-$(CONFIG_SOC_DRA7XX)		+= $(omap-4-5-common) $(smp-y) sleep44xx.o
 
-plus_sec := $(call as-instr,.arch_extension sec,+sec)
-AFLAGS_omap-headsmp.o			:=-Wa,-march=armv7-a$(plus_sec)
-AFLAGS_omap-smc.o			:=-Wa,-march=armv7-a$(plus_sec)
-AFLAGS_sleep44xx.o			:=-Wa,-march=armv7-a$(plus_sec)
-
 # Functions loaded to SRAM
 obj-$(CONFIG_SOC_OMAP2420)		+= sram242x.o
 obj-$(CONFIG_SOC_OMAP2430)		+= sram243x.o
 
-AFLAGS_sram242x.o			:=-Wa,-march=armv6
-AFLAGS_sram243x.o			:=-Wa,-march=armv6
-
 # Restart code (OMAP4/5 currently in omap4-common.c)
 obj-$(CONFIG_SOC_OMAP2420)		+= omap2-restart.o
 obj-$(CONFIG_SOC_OMAP2430)		+= omap2-restart.o
@@ -94,11 +86,6 @@ obj-$(CONFIG_PM_DEBUG)			+= pm-debug.o
 obj-$(CONFIG_POWER_AVS_OMAP)		+= sr_device.o
 obj-$(CONFIG_POWER_AVS_OMAP_CLASS3)    += smartreflex-class3.o
 
-AFLAGS_sleep24xx.o			:=-Wa,-march=armv6
-AFLAGS_sleep34xx.o			:=-Wa,-march=armv7-a$(plus_sec)
-AFLAGS_sleep33xx.o			:=-Wa,-march=armv7-a$(plus_sec)
-AFLAGS_sleep43xx.o			:=-Wa,-march=armv7-a$(plus_sec)
-
 endif
 
 ifeq ($(CONFIG_CPU_IDLE),y)
diff --git a/arch/arm/mach-omap2/omap-headsmp.S b/arch/arm/mach-omap2/omap-headsmp.S
index 7d0db77ab8cb..1762f919941f 100644
--- a/arch/arm/mach-omap2/omap-headsmp.S
+++ b/arch/arm/mach-omap2/omap-headsmp.S
@@ -55,6 +55,8 @@ ENDPROC(omap5_secondary_startup)
  * omap5_secondary_startup if the primary CPU was put into HYP mode by
  * the boot loader.
  */
+	.arch armv7-a
+	.arch_extension sec
 ENTRY(omap5_secondary_hyp_startup)
 wait_2:	ldr	r2, =AUX_CORE_BOOT0_PA	@ read from AuxCoreBoot0
 	ldr	r0, [r2]
diff --git a/arch/arm/mach-omap2/omap-smc.S b/arch/arm/mach-omap2/omap-smc.S
index 630b9bd099e0..fd2bcd91f4a1 100644
--- a/arch/arm/mach-omap2/omap-smc.S
+++ b/arch/arm/mach-omap2/omap-smc.S
@@ -20,7 +20,8 @@
  * link register "lr".
  * Function signature : void omap_smc1(u32 fn, u32 arg)
  */
-
+	.arch armv7-a
+	.arch_extension sec
 ENTRY(omap_smc1)
 	stmfd   sp!, {r2-r12, lr}
 	mov	r12, r0
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
index 4c3543bae562..adb6271f819b 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
@@ -529,7 +529,7 @@ static struct omap_hwmod_class_sysconfig am33xx_gpio_sysc = {
 	.sysc_fields	= &omap_hwmod_sysc_type1,
 };
 
-struct omap_hwmod_class am33xx_gpio_hwmod_class = {
+static struct omap_hwmod_class am33xx_gpio_hwmod_class = {
 	.name		= "gpio",
 	.sysc		= &am33xx_gpio_sysc,
 };
@@ -539,7 +539,7 @@ static struct omap_hwmod_opt_clk gpio1_opt_clks[] = {
 	{ .role = "dbclk", .clk = "gpio1_dbclk" },
 };
 
-struct omap_hwmod am33xx_gpio1_hwmod = {
+static struct omap_hwmod am33xx_gpio1_hwmod = {
 	.name		= "gpio2",
 	.class		= &am33xx_gpio_hwmod_class,
 	.clkdm_name	= "l4ls_clkdm",
@@ -559,7 +559,7 @@ static struct omap_hwmod_opt_clk gpio2_opt_clks[] = {
 	{ .role = "dbclk", .clk = "gpio2_dbclk" },
 };
 
-struct omap_hwmod am33xx_gpio2_hwmod = {
+static struct omap_hwmod am33xx_gpio2_hwmod = {
 	.name		= "gpio3",
 	.class		= &am33xx_gpio_hwmod_class,
 	.clkdm_name	= "l4ls_clkdm",
@@ -579,7 +579,7 @@ static struct omap_hwmod_opt_clk gpio3_opt_clks[] = {
 	{ .role = "dbclk", .clk = "gpio3_dbclk" },
 };
 
-struct omap_hwmod am33xx_gpio3_hwmod = {
+static struct omap_hwmod am33xx_gpio3_hwmod = {
 	.name		= "gpio4",
 	.class		= &am33xx_gpio_hwmod_class,
 	.clkdm_name	= "l4ls_clkdm",
diff --git a/arch/arm/mach-omap2/sleep33xx.S b/arch/arm/mach-omap2/sleep33xx.S
index 47a816468cdb..68fee339d3f1 100644
--- a/arch/arm/mach-omap2/sleep33xx.S
+++ b/arch/arm/mach-omap2/sleep33xx.S
@@ -24,6 +24,7 @@
 #define BIT(nr)			(1 << (nr))
 
 	.arm
+	.arch armv7-a
 	.align 3
 
 ENTRY(am33xx_do_wfi)
diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S
index 75ea4723ec0e..ac1324c6453b 100644
--- a/arch/arm/mach-omap2/sleep34xx.S
+++ b/arch/arm/mach-omap2/sleep34xx.S
@@ -83,6 +83,8 @@ ENDPROC(enable_omap3630_toggle_l2_on_restore)
  *
  * r0 = physical address of the parameters
  */
+	.arch armv7-a
+	.arch_extension sec
 ENTRY(save_secure_ram_context)
 	stmfd	sp!, {r4 - r11, lr}	@ save registers on stack
 	mov	r3, r0			@ physical address of parameters
diff --git a/arch/arm/mach-omap2/sleep43xx.S b/arch/arm/mach-omap2/sleep43xx.S
index 0c1031442571..c1f4e4852644 100644
--- a/arch/arm/mach-omap2/sleep43xx.S
+++ b/arch/arm/mach-omap2/sleep43xx.S
@@ -56,6 +56,8 @@
 #define RTC_PMIC_EXT_WAKEUP_EN				BIT(0)
 
 	.arm
+	.arch armv7-a
+	.arch_extension sec
 	.align 3
 
 ENTRY(am43xx_do_wfi)
diff --git a/arch/arm/mach-omap2/sleep44xx.S b/arch/arm/mach-omap2/sleep44xx.S
index 934033ad847f..f60f6a9aed73 100644
--- a/arch/arm/mach-omap2/sleep44xx.S
+++ b/arch/arm/mach-omap2/sleep44xx.S
@@ -18,8 +18,11 @@
 #include "omap44xx.h"
 #include "omap4-sar-layout.h"
 
+	.arch armv7-a
+
 #if defined(CONFIG_SMP) && defined(CONFIG_PM)
 
+	.arch_extension sec
 .macro	DO_SMC
 	dsb
 	smc	#0
diff --git a/arch/arm/mach-pxa/include/mach/lubbock.h b/arch/arm/mach-pxa/include/mach/lubbock.h
index 72b5c3db37dc..a3af4a2f9446 100644
--- a/arch/arm/mach-pxa/include/mach/lubbock.h
+++ b/arch/arm/mach-pxa/include/mach/lubbock.h
@@ -47,7 +47,3 @@
 #define LUBBOCK_LAST_IRQ	LUBBOCK_IRQ(6)
 
 #define LUBBOCK_SA1111_IRQ_BASE	(LUBBOCK_NR_IRQS + 32)
-
-#ifndef __ASSEMBLY__
-extern void lubbock_set_misc_wr(unsigned int mask, unsigned int set);
-#endif
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index a3ecccc24ec5..742d18a1f7dc 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -116,12 +116,11 @@ void lubbock_set_hexled(uint32_t value)
 
 static struct gpio_chip *lubbock_misc_wr_gc;
 
-void lubbock_set_misc_wr(unsigned int mask, unsigned int set)
+static void lubbock_set_misc_wr(unsigned int mask, unsigned int set)
 {
 	unsigned long m = mask, v = set;
 	lubbock_misc_wr_gc->set_multiple(lubbock_misc_wr_gc, &m, &v);
 }
-EXPORT_SYMBOL(lubbock_set_misc_wr);
 
 static int lubbock_udc_is_connected(void)
 {
diff --git a/arch/arm/mach-rockchip/platsmp.c b/arch/arm/mach-rockchip/platsmp.c
index 909fffee0240..649e0a54784c 100644
--- a/arch/arm/mach-rockchip/platsmp.c
+++ b/arch/arm/mach-rockchip/platsmp.c
@@ -269,19 +269,25 @@ static void __init rockchip_smp_prepare_cpus(unsigned int max_cpus)
 	sram_base_addr = of_iomap(node, 0);
 	if (!sram_base_addr) {
 		pr_err("%s: could not map sram registers\n", __func__);
+		of_node_put(node);
 		return;
 	}
 
-	if (has_pmu && rockchip_smp_prepare_pmu())
+	if (has_pmu && rockchip_smp_prepare_pmu()) {
+		of_node_put(node);
 		return;
+	}
 
 	if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) {
-		if (rockchip_smp_prepare_sram(node))
+		if (rockchip_smp_prepare_sram(node)) {
+			of_node_put(node);
 			return;
+		}
 
 		/* enable the SCU power domain */
 		pmu_set_power_domain(PMU_PWRDN_SCU, true);
 
+		of_node_put(node);
 		node = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-scu");
 		if (!node) {
 			pr_err("%s: missing scu\n", __func__);
@@ -291,6 +297,7 @@ static void __init rockchip_smp_prepare_cpus(unsigned int max_cpus)
 		scu_base_addr = of_iomap(node, 0);
 		if (!scu_base_addr) {
 			pr_err("%s: could not map scu registers\n", __func__);
+			of_node_put(node);
 			return;
 		}
 
@@ -309,6 +316,7 @@ static void __init rockchip_smp_prepare_cpus(unsigned int max_cpus)
 		asm ("mrc p15, 1, %0, c9, c0, 2\n" : "=r" (l2ctlr));
 		ncores = ((l2ctlr >> 24) & 0x3) + 1;
 	}
+	of_node_put(node);
 
 	/* Make sure that all cores except the first are really off */
 	for (i = 1; i < ncores; i++)
diff --git a/arch/arm/mach-rockchip/pm.c b/arch/arm/mach-rockchip/pm.c
index 744b5b332e42..87389d9456b9 100644
--- a/arch/arm/mach-rockchip/pm.c
+++ b/arch/arm/mach-rockchip/pm.c
@@ -257,12 +257,14 @@ static int __init rk3288_suspend_init(struct device_node *np)
 	rk3288_bootram_base = of_iomap(sram_np, 0);
 	if (!rk3288_bootram_base) {
 		pr_err("%s: could not map bootram base\n", __func__);
+		of_node_put(sram_np);
 		return -ENOMEM;
 	}
 
 	ret = of_address_to_resource(sram_np, 0, &res);
 	if (ret) {
 		pr_err("%s: could not get bootram phy addr\n", __func__);
+		of_node_put(sram_np);
 		return ret;
 	}
 	rk3288_bootram_phy = res.start;
diff --git a/arch/arm/mach-rpc/Makefile b/arch/arm/mach-rpc/Makefile
index 056ef5460290..90a645a18444 100644
--- a/arch/arm/mach-rpc/Makefile
+++ b/arch/arm/mach-rpc/Makefile
@@ -5,4 +5,5 @@
 
 # Object file lists.
 
-obj-y			:= dma.o ecard.o fiq.o irq.o riscpc.o time.o
+obj-y	:=dma.o ecard.o ecard-loader.o fiq.o floppydma.o io-acorn.o irq.o \
+	  riscpc.o time.o
diff --git a/arch/arm/mach-rpc/dma.c b/arch/arm/mach-rpc/dma.c
index 488d5c3b37f4..50e0f97afd75 100644
--- a/arch/arm/mach-rpc/dma.c
+++ b/arch/arm/mach-rpc/dma.c
@@ -24,10 +24,11 @@
 
 struct iomd_dma {
 	struct dma_struct	dma;
-	unsigned int		state;
-	unsigned long		base;		/* Controller base address */
+	void __iomem		*base;		/* Controller base address */
 	int			irq;		/* Controller IRQ */
-	struct scatterlist	cur_sg;		/* Current controller buffer */
+	unsigned int		state;
+	dma_addr_t		cur_addr;
+	unsigned int		cur_len;
 	dma_addr_t		dma_addr;
 	unsigned int		dma_len;
 };
@@ -50,13 +51,13 @@ typedef enum {
 #define CR	(IOMD_IO0CR - IOMD_IO0CURA)
 #define ST	(IOMD_IO0ST - IOMD_IO0CURA)
 
-static void iomd_get_next_sg(struct scatterlist *sg, struct iomd_dma *idma)
+static void iomd_get_next_sg(struct iomd_dma *idma)
 {
 	unsigned long end, offset, flags = 0;
 
 	if (idma->dma.sg) {
-		sg->dma_address = idma->dma_addr;
-		offset = sg->dma_address & ~PAGE_MASK;
+		idma->cur_addr = idma->dma_addr;
+		offset = idma->cur_addr & ~PAGE_MASK;
 
 		end = offset + idma->dma_len;
 
@@ -66,7 +67,7 @@ static void iomd_get_next_sg(struct scatterlist *sg, struct iomd_dma *idma)
 		if (offset + TRANSFER_SIZE >= end)
 			flags |= DMA_END_L;
 
-		sg->length = end - TRANSFER_SIZE;
+		idma->cur_len = end - TRANSFER_SIZE;
 
 		idma->dma_len -= end - offset;
 		idma->dma_addr += end - offset;
@@ -84,52 +85,49 @@ static void iomd_get_next_sg(struct scatterlist *sg, struct iomd_dma *idma)
 		}
 	} else {
 		flags = DMA_END_S | DMA_END_L;
-		sg->dma_address = 0;
-		sg->length = 0;
+		idma->cur_addr = 0;
+		idma->cur_len = 0;
 	}
 
-	sg->length |= flags;
+	idma->cur_len |= flags;
 }
 
 static irqreturn_t iomd_dma_handle(int irq, void *dev_id)
 {
 	struct iomd_dma *idma = dev_id;
-	unsigned long base = idma->base;
+	void __iomem *base = idma->base;
+	unsigned int state = idma->state;
+	unsigned int status, cur, end;
 
 	do {
-		unsigned int status;
-
-		status = iomd_readb(base + ST);
+		status = readb(base + ST);
 		if (!(status & DMA_ST_INT))
-			return IRQ_HANDLED;
-
-		if ((idma->state ^ status) & DMA_ST_AB)
-			iomd_get_next_sg(&idma->cur_sg, idma);
-
-		switch (status & (DMA_ST_OFL | DMA_ST_AB)) {
-		case DMA_ST_OFL:			/* OIA */
-		case DMA_ST_AB:				/* .IB */
-			iomd_writel(idma->cur_sg.dma_address, base + CURA);
-			iomd_writel(idma->cur_sg.length, base + ENDA);
-			idma->state = DMA_ST_AB;
-			break;
-
-		case DMA_ST_OFL | DMA_ST_AB:		/* OIB */
-		case 0:					/* .IA */
-			iomd_writel(idma->cur_sg.dma_address, base + CURB);
-			iomd_writel(idma->cur_sg.length, base + ENDB);
-			idma->state = 0;
-			break;
+			goto out;
+
+		if ((state ^ status) & DMA_ST_AB)
+			iomd_get_next_sg(idma);
+
+		// This efficiently implements state = OFL != AB ? AB : 0
+		state = ((status >> 2) ^ status) & DMA_ST_AB;
+		if (state) {
+			cur = CURA;
+			end = ENDA;
+		} else {
+			cur = CURB;
+			end = ENDB;
 		}
+		writel(idma->cur_addr, base + cur);
+		writel(idma->cur_len, base + end);
 
 		if (status & DMA_ST_OFL &&
-		    idma->cur_sg.length == (DMA_END_S|DMA_END_L))
+		    idma->cur_len == (DMA_END_S|DMA_END_L))
 			break;
 	} while (1);
 
-	idma->state = ~DMA_ST_AB;
-	disable_irq(irq);
-
+	state = ~DMA_ST_AB;
+	disable_irq_nosync(irq);
+out:
+	idma->state = state;
 	return IRQ_HANDLED;
 }
 
@@ -157,7 +155,7 @@ static struct device isa_dma_dev = {
 static void iomd_enable_dma(unsigned int chan, dma_t *dma)
 {
 	struct iomd_dma *idma = container_of(dma, struct iomd_dma, dma);
-	unsigned long dma_base = idma->base;
+	void __iomem *base = idma->base;
 	unsigned int ctrl = TRANSFER_SIZE | DMA_CR_E;
 
 	if (idma->dma.invalid) {
@@ -177,27 +175,30 @@ static void iomd_enable_dma(unsigned int chan, dma_t *dma)
 				DMA_FROM_DEVICE : DMA_TO_DEVICE);
 		}
 
-		iomd_writeb(DMA_CR_C, dma_base + CR);
+		idma->dma_addr = idma->dma.sg->dma_address;
+		idma->dma_len = idma->dma.sg->length;
+
+		writeb(DMA_CR_C, base + CR);
 		idma->state = DMA_ST_AB;
 	}
 
 	if (idma->dma.dma_mode == DMA_MODE_READ)
 		ctrl |= DMA_CR_D;
 
-	iomd_writeb(ctrl, dma_base + CR);
+	writeb(ctrl, base + CR);
 	enable_irq(idma->irq);
 }
 
 static void iomd_disable_dma(unsigned int chan, dma_t *dma)
 {
 	struct iomd_dma *idma = container_of(dma, struct iomd_dma, dma);
-	unsigned long dma_base = idma->base;
+	void __iomem *base = idma->base;
 	unsigned long flags;
 
 	local_irq_save(flags);
 	if (idma->state != ~DMA_ST_AB)
 		disable_irq(idma->irq);
-	iomd_writeb(0, dma_base + CR);
+	writeb(0, base + CR);
 	local_irq_restore(flags);
 }
 
@@ -360,17 +361,17 @@ static int __init rpc_dma_init(void)
 	 */
 	iomd_writeb(DMA_EXT_IO3|DMA_EXT_IO2, IOMD_DMAEXT);
 
-	iomd_dma[DMA_0].base	= IOMD_IO0CURA;
+	iomd_dma[DMA_0].base	= IOMD_BASE + IOMD_IO0CURA;
 	iomd_dma[DMA_0].irq	= IRQ_DMA0;
-	iomd_dma[DMA_1].base	= IOMD_IO1CURA;
+	iomd_dma[DMA_1].base	= IOMD_BASE + IOMD_IO1CURA;
 	iomd_dma[DMA_1].irq	= IRQ_DMA1;
-	iomd_dma[DMA_2].base	= IOMD_IO2CURA;
+	iomd_dma[DMA_2].base	= IOMD_BASE + IOMD_IO2CURA;
 	iomd_dma[DMA_2].irq	= IRQ_DMA2;
-	iomd_dma[DMA_3].base	= IOMD_IO3CURA;
+	iomd_dma[DMA_3].base	= IOMD_BASE + IOMD_IO3CURA;
 	iomd_dma[DMA_3].irq	= IRQ_DMA3;
-	iomd_dma[DMA_S0].base	= IOMD_SD0CURA;
+	iomd_dma[DMA_S0].base	= IOMD_BASE + IOMD_SD0CURA;
 	iomd_dma[DMA_S0].irq	= IRQ_DMAS0;
-	iomd_dma[DMA_S1].base	= IOMD_SD1CURA;
+	iomd_dma[DMA_S1].base	= IOMD_BASE + IOMD_SD1CURA;
 	iomd_dma[DMA_S1].irq	= IRQ_DMAS1;
 
 	for (i = DMA_0; i <= DMA_S1; i++) {
diff --git a/arch/arm/lib/ecard.S b/arch/arm/mach-rpc/ecard-loader.S
index eb8ac0412da6..eb8ac0412da6 100644
--- a/arch/arm/lib/ecard.S
+++ b/arch/arm/mach-rpc/ecard-loader.S
diff --git a/arch/arm/mach-rpc/ecard.c b/arch/arm/mach-rpc/ecard.c
index cf0593bc42d2..75cfad2cb143 100644
--- a/arch/arm/mach-rpc/ecard.c
+++ b/arch/arm/mach-rpc/ecard.c
@@ -67,17 +67,21 @@ struct expcard_blacklist {
 	unsigned short	 manufacturer;
 	unsigned short	 product;
 	const char	*type;
+	void (*init)(ecard_t *ec);
 };
 
 static ecard_t *cards;
 static ecard_t *slot_to_expcard[MAX_ECARDS];
 static unsigned int ectcr;
 
+static void atomwide_3p_quirk(ecard_t *ec);
+
 /* List of descriptions of cards which don't have an extended
  * identification, or chunk directories containing a description.
  */
 static struct expcard_blacklist __initdata blacklist[] = {
-	{ MANU_ACORN, PROD_ACORN_ETHER1, "Acorn Ether1" }
+	{ MANU_ACORN, PROD_ACORN_ETHER1, "Acorn Ether1" },
+	{ MANU_ATOMWIDE, PROD_ATOMWIDE_3PSERIAL, NULL, atomwide_3p_quirk },
 };
 
 asmlinkage extern int
@@ -493,18 +497,21 @@ static void ecard_dump_irq_state(void)
 	printk("Expansion card IRQ state:\n");
 
 	for (ec = cards; ec; ec = ec->next) {
+		const char *claimed;
+
 		if (ec->slot_no == 8)
 			continue;
 
-		printk("  %d: %sclaimed, ",
-		       ec->slot_no, ec->claimed ? "" : "not ");
+		claimed = ec->claimed ? "" : "not ";
 
 		if (ec->ops && ec->ops->irqpending &&
 		    ec->ops != &ecard_default_ops)
-			printk("irq %spending\n",
+			printk("  %d: %sclaimed irq %spending\n",
+			       ec->slot_no, claimed,
 			       ec->ops->irqpending(ec) ? "" : "not ");
 		else
-			printk("irqaddr %p, mask = %02X, status = %02X\n",
+			printk("  %d: %sclaimed irqaddr %p, mask = %02X, status = %02X\n",
+			       ec->slot_no, claimed,
 			       ec->irqaddr, ec->irqmask, readb(ec->irqaddr));
 	}
 }
@@ -865,6 +872,16 @@ void __iomem *ecardm_iomap(struct expansion_card *ec, unsigned int res,
 }
 EXPORT_SYMBOL(ecardm_iomap);
 
+static void atomwide_3p_quirk(ecard_t *ec)
+{
+	void __iomem *addr = __ecard_address(ec, ECARD_IOC, ECARD_SYNC);
+	unsigned int i;
+
+	/* Disable interrupts on each port */
+	for (i = 0x2000; i <= 0x2800; i += 0x0400)
+		writeb(0, addr + i + 4);	
+}
+
 /*
  * Probe for an expansion card.
  *
@@ -921,7 +938,10 @@ static int __init ecard_probe(int slot, unsigned irq, card_type_t type)
 	for (i = 0; i < ARRAY_SIZE(blacklist); i++)
 		if (blacklist[i].manufacturer == ec->cid.manufacturer &&
 		    blacklist[i].product == ec->cid.product) {
-			ec->card_desc = blacklist[i].type;
+		    	if (blacklist[i].type)
+				ec->card_desc = blacklist[i].type;
+			if (blacklist[i].init)
+				blacklist[i].init(ec);
 			break;
 		}
 
diff --git a/arch/arm/lib/floppydma.S b/arch/arm/mach-rpc/floppydma.S
index 6698b83050dc..6698b83050dc 100644
--- a/arch/arm/lib/floppydma.S
+++ b/arch/arm/mach-rpc/floppydma.S
diff --git a/arch/arm/mach-rpc/include/mach/uncompress.h b/arch/arm/mach-rpc/include/mach/uncompress.h
index a023b5f9bbbb..1fbe7eb956fd 100644
--- a/arch/arm/mach-rpc/include/mach/uncompress.h
+++ b/arch/arm/mach-rpc/include/mach/uncompress.h
@@ -115,29 +115,22 @@ static void arch_decomp_setup(void)
 	struct tag *t = (struct tag *)params;
 	unsigned int nr_pages = 0, page_size = PAGE_SIZE;
 
-	if (t->hdr.tag == ATAG_CORE)
-	{
-		for (; t->hdr.size; t = tag_next(t))
-		{
-			if (t->hdr.tag == ATAG_VIDEOTEXT)
-			{
+	if (t->hdr.tag == ATAG_CORE) {
+		for (; t->hdr.size; t = tag_next(t)) {
+			if (t->hdr.tag == ATAG_VIDEOTEXT) {
 				video_num_rows = t->u.videotext.video_lines;
 				video_num_cols = t->u.videotext.video_cols;
-				bytes_per_char_h = t->u.videotext.video_points;
-				bytes_per_char_v = t->u.videotext.video_points;
 				video_x = t->u.videotext.x;
 				video_y = t->u.videotext.y;
-			}
-
-			if (t->hdr.tag == ATAG_MEM)
-			{
+			} else if (t->hdr.tag == ATAG_VIDEOLFB) {
+				bytes_per_char_h = t->u.videolfb.lfb_depth;
+				bytes_per_char_v = 8;
+			} else if (t->hdr.tag == ATAG_MEM) {
 				page_size = PAGE_SIZE;
 				nr_pages += (t->u.mem.size / PAGE_SIZE);
 			}
 		}
-	}
-	else
-	{
+	} else {
 		nr_pages = params->nr_pages;
 		page_size = params->page_size;
 		video_num_rows = params->video_num_rows;
diff --git a/arch/arm/lib/io-acorn.S b/arch/arm/mach-rpc/io-acorn.S
index b9082a2a2a01..b9082a2a2a01 100644
--- a/arch/arm/lib/io-acorn.S
+++ b/arch/arm/mach-rpc/io-acorn.S
diff --git a/arch/arm/mach-rpc/irq.c b/arch/arm/mach-rpc/irq.c
index b8a61cb11207..803aeb126f0e 100644
--- a/arch/arm/mach-rpc/irq.c
+++ b/arch/arm/mach-rpc/irq.c
@@ -8,117 +8,71 @@
 #include <asm/irq.h>
 #include <asm/fiq.h>
 
-static void iomd_ack_irq_a(struct irq_data *d)
-{
-	unsigned int val, mask;
-
-	mask = 1 << d->irq;
-	val = iomd_readb(IOMD_IRQMASKA);
-	iomd_writeb(val & ~mask, IOMD_IRQMASKA);
-	iomd_writeb(mask, IOMD_IRQCLRA);
-}
-
-static void iomd_mask_irq_a(struct irq_data *d)
-{
-	unsigned int val, mask;
+// These are offsets from the stat register for each IRQ bank
+#define STAT	0x00
+#define REQ	0x04
+#define CLR	0x04
+#define MASK	0x08
 
-	mask = 1 << d->irq;
-	val = iomd_readb(IOMD_IRQMASKA);
-	iomd_writeb(val & ~mask, IOMD_IRQMASKA);
-}
-
-static void iomd_unmask_irq_a(struct irq_data *d)
+static void __iomem *iomd_get_base(struct irq_data *d)
 {
-	unsigned int val, mask;
+	void *cd = irq_data_get_irq_chip_data(d);
 
-	mask = 1 << d->irq;
-	val = iomd_readb(IOMD_IRQMASKA);
-	iomd_writeb(val | mask, IOMD_IRQMASKA);
+	return (void __iomem *)(unsigned long)cd;
 }
 
-static struct irq_chip iomd_a_chip = {
-	.irq_ack	= iomd_ack_irq_a,
-	.irq_mask	= iomd_mask_irq_a,
-	.irq_unmask	= iomd_unmask_irq_a,
-};
-
-static void iomd_mask_irq_b(struct irq_data *d)
+static void iomd_set_base_mask(unsigned int irq, void __iomem *base, u32 mask)
 {
-	unsigned int val, mask;
+	struct irq_data *d = irq_get_irq_data(irq);
 
-	mask = 1 << (d->irq & 7);
-	val = iomd_readb(IOMD_IRQMASKB);
-	iomd_writeb(val & ~mask, IOMD_IRQMASKB);
+	d->mask = mask;
+	irq_set_chip_data(irq, (void *)(unsigned long)base);
 }
 
-static void iomd_unmask_irq_b(struct irq_data *d)
+static void iomd_irq_mask_ack(struct irq_data *d)
 {
-	unsigned int val, mask;
+	void __iomem *base = iomd_get_base(d);
+	unsigned int val, mask = d->mask;
 
-	mask = 1 << (d->irq & 7);
-	val = iomd_readb(IOMD_IRQMASKB);
-	iomd_writeb(val | mask, IOMD_IRQMASKB);
+	val = readb(base + MASK);
+	writeb(val & ~mask, base + MASK);
+	writeb(mask, base + CLR);
 }
 
-static struct irq_chip iomd_b_chip = {
-	.irq_ack	= iomd_mask_irq_b,
-	.irq_mask	= iomd_mask_irq_b,
-	.irq_unmask	= iomd_unmask_irq_b,
-};
-
-static void iomd_mask_irq_dma(struct irq_data *d)
+static void iomd_irq_mask(struct irq_data *d)
 {
-	unsigned int val, mask;
+	void __iomem *base = iomd_get_base(d);
+	unsigned int val, mask = d->mask;
 
-	mask = 1 << (d->irq & 7);
-	val = iomd_readb(IOMD_DMAMASK);
-	iomd_writeb(val & ~mask, IOMD_DMAMASK);
+	val = readb(base + MASK);
+	writeb(val & ~mask, base + MASK);
 }
 
-static void iomd_unmask_irq_dma(struct irq_data *d)
+static void iomd_irq_unmask(struct irq_data *d)
 {
-	unsigned int val, mask;
+	void __iomem *base = iomd_get_base(d);
+	unsigned int val, mask = d->mask;
 
-	mask = 1 << (d->irq & 7);
-	val = iomd_readb(IOMD_DMAMASK);
-	iomd_writeb(val | mask, IOMD_DMAMASK);
+	val = readb(base + MASK);
+	writeb(val | mask, base + MASK);
 }
 
-static struct irq_chip iomd_dma_chip = {
-	.irq_ack	= iomd_mask_irq_dma,
-	.irq_mask	= iomd_mask_irq_dma,
-	.irq_unmask	= iomd_unmask_irq_dma,
+static struct irq_chip iomd_chip_clr = {
+	.irq_mask_ack	= iomd_irq_mask_ack,
+	.irq_mask	= iomd_irq_mask,
+	.irq_unmask	= iomd_irq_unmask,
 };
 
-static void iomd_mask_irq_fiq(struct irq_data *d)
-{
-	unsigned int val, mask;
-
-	mask = 1 << (d->irq & 7);
-	val = iomd_readb(IOMD_FIQMASK);
-	iomd_writeb(val & ~mask, IOMD_FIQMASK);
-}
-
-static void iomd_unmask_irq_fiq(struct irq_data *d)
-{
-	unsigned int val, mask;
-
-	mask = 1 << (d->irq & 7);
-	val = iomd_readb(IOMD_FIQMASK);
-	iomd_writeb(val | mask, IOMD_FIQMASK);
-}
-
-static struct irq_chip iomd_fiq_chip = {
-	.irq_ack	= iomd_mask_irq_fiq,
-	.irq_mask	= iomd_mask_irq_fiq,
-	.irq_unmask	= iomd_unmask_irq_fiq,
+static struct irq_chip iomd_chip_noclr = {
+	.irq_mask	= iomd_irq_mask,
+	.irq_unmask	= iomd_irq_unmask,
 };
 
 extern unsigned char rpc_default_fiq_start, rpc_default_fiq_end;
 
 void __init rpc_init_irq(void)
 {
-	unsigned int irq, clr, set = 0;
+	unsigned int irq, clr, set;
 
 	iomd_writeb(0, IOMD_IRQMASKA);
 	iomd_writeb(0, IOMD_IRQMASKB);
@@ -130,6 +84,7 @@ void __init rpc_init_irq(void)
 
 	for (irq = 0; irq < NR_IRQS; irq++) {
 		clr = IRQ_NOREQUEST;
+		set = 0;
 
 		if (irq <= 6 || (irq >= 9 && irq <= 15))
 			clr |= IRQ_NOPROBE;
@@ -140,30 +95,37 @@ void __init rpc_init_irq(void)
 
 		switch (irq) {
 		case 0 ... 7:
-			irq_set_chip_and_handler(irq, &iomd_a_chip,
+			irq_set_chip_and_handler(irq, &iomd_chip_clr,
 						 handle_level_irq);
 			irq_modify_status(irq, clr, set);
+			iomd_set_base_mask(irq, IOMD_BASE + IOMD_IRQSTATA,
+					   BIT(irq));
 			break;
 
 		case 8 ... 15:
-			irq_set_chip_and_handler(irq, &iomd_b_chip,
+			irq_set_chip_and_handler(irq, &iomd_chip_noclr,
 						 handle_level_irq);
 			irq_modify_status(irq, clr, set);
+			iomd_set_base_mask(irq, IOMD_BASE + IOMD_IRQSTATB,
+					   BIT(irq - 8));
 			break;
 
 		case 16 ... 21:
-			irq_set_chip_and_handler(irq, &iomd_dma_chip,
+			irq_set_chip_and_handler(irq, &iomd_chip_noclr,
 						 handle_level_irq);
 			irq_modify_status(irq, clr, set);
+			iomd_set_base_mask(irq, IOMD_BASE + IOMD_DMASTAT,
+					   BIT(irq - 16));
 			break;
 
 		case 64 ... 71:
-			irq_set_chip(irq, &iomd_fiq_chip);
+			irq_set_chip(irq, &iomd_chip_noclr);
 			irq_modify_status(irq, clr, set);
+			iomd_set_base_mask(irq, IOMD_BASE + IOMD_FIQSTAT,
+					   BIT(irq - 64));
 			break;
 		}
 	}
 
 	init_FIQ(FIQ_START);
 }
-
diff --git a/arch/arm/mach-rpc/time.c b/arch/arm/mach-rpc/time.c
index e97f93a0af1d..1d750152b160 100644
--- a/arch/arm/mach-rpc/time.c
+++ b/arch/arm/mach-rpc/time.c
@@ -10,7 +10,7 @@
  *   04-Dec-1997	RMK	Updated for new arch/arm/time.c
  *   13=Jun-2004	DS	Moved to arch/arm/common b/c shared w/CLPS7500
  */
-#include <linux/timex.h>
+#include <linux/clocksource.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
@@ -24,11 +24,15 @@
 #define RPC_CLOCK_FREQ 2000000
 #define RPC_LATCH DIV_ROUND_CLOSEST(RPC_CLOCK_FREQ, HZ)
 
-static u32 ioc_timer_gettimeoffset(void)
+static u32 ioc_time;
+
+static u64 ioc_timer_read(struct clocksource *cs)
 {
 	unsigned int count1, count2, status;
-	long offset;
+	unsigned long flags;
+	u32 ticks;
 
+	local_irq_save(flags);
 	ioc_writeb (0, IOC_T0LATCH);
 	barrier ();
 	count1 = ioc_readb(IOC_T0CNTL) | (ioc_readb(IOC_T0CNTH) << 8);
@@ -38,27 +42,34 @@ static u32 ioc_timer_gettimeoffset(void)
 	ioc_writeb (0, IOC_T0LATCH);
 	barrier ();
 	count2 = ioc_readb(IOC_T0CNTL) | (ioc_readb(IOC_T0CNTH) << 8);
+	ticks = ioc_time + RPC_LATCH - count2;
+	local_irq_restore(flags);
 
-	offset = count2;
 	if (count2 < count1) {
 		/*
-		 * We have not had an interrupt between reading count1
-		 * and count2.
+		 * The timer has not reloaded between reading count1 and
+		 * count2, check whether an interrupt was actually pending.
 		 */
 		if (status & (1 << 5))
-			offset -= RPC_LATCH;
+			ticks += RPC_LATCH;
 	} else if (count2 > count1) {
 		/*
-		 * We have just had another interrupt between reading
-		 * count1 and count2.
+		 * The timer has reloaded, so count2 indicates the new
+		 * count since the wrap.  The interrupt would not have
+		 * been processed, so add the missed ticks.
 		 */
-		offset -= RPC_LATCH;
+		ticks += RPC_LATCH;
 	}
 
-	offset = (RPC_LATCH - offset) * (tick_nsec / 1000);
-	return DIV_ROUND_CLOSEST(offset, RPC_LATCH) * 1000;
+	return ticks;
 }
 
+static struct clocksource ioctime_clocksource = {
+	.read = ioc_timer_read,
+	.mask = CLOCKSOURCE_MASK(32),
+	.rating = 100,
+};
+
 void __init ioctime_init(void)
 {
 	ioc_writeb(RPC_LATCH & 255, IOC_T0LTCHL);
@@ -69,6 +80,7 @@ void __init ioctime_init(void)
 static irqreturn_t
 ioc_timer_interrupt(int irq, void *dev_id)
 {
+	ioc_time += RPC_LATCH;
 	timer_tick();
 	return IRQ_HANDLED;
 }
@@ -83,7 +95,7 @@ static struct irqaction ioc_timer_irq = {
  */
 void __init ioc_timer_init(void)
 {
-	arch_gettimeoffset = ioc_timer_gettimeoffset;
+	WARN_ON(clocksource_register_hz(&ioctime_clocksource, RPC_CLOCK_FREQ));
 	ioctime_init();
 	setup_irq(IRQ_TIMER0, &ioc_timer_irq);
 }
diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index dd8d13fb8450..d96a101e5504 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -519,6 +519,29 @@ static const struct gpio_keys_platform_data assabet_keys_pdata = {
 	.rep = 0,
 };
 
+static struct gpiod_lookup_table assabet_uart1_gpio_table = {
+	.dev_id = "sa11x0-uart.1",
+	.table = {
+		GPIO_LOOKUP("assabet", 16, "dtr", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("assabet", 17, "rts", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("assabet", 25, "dcd", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("assabet", 26, "cts", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("assabet", 27, "dsr", GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
+static struct gpiod_lookup_table assabet_uart3_gpio_table = {
+	.dev_id = "sa11x0-uart.3",
+	.table = {
+		GPIO_LOOKUP("assabet", 28, "cts", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("assabet", 29, "dsr", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("assabet", 30, "dcd", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("assabet", 31, "rng", GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
 static void __init assabet_init(void)
 {
 	/*
@@ -565,7 +588,10 @@ static void __init assabet_init(void)
 			neponset_resources, ARRAY_SIZE(neponset_resources));
 #endif
 	} else {
+		gpiod_add_lookup_table(&assabet_uart1_gpio_table);
+		gpiod_add_lookup_table(&assabet_uart3_gpio_table);
 		gpiod_add_lookup_table(&assabet_cf_vcc_gpio_table);
+
 		sa11x0_register_fixed_regulator(0, &assabet_cf_vcc_pdata,
 					assabet_cf_vcc_consumers,
 					ARRAY_SIZE(assabet_cf_vcc_consumers),
@@ -655,74 +681,13 @@ static void assabet_uart_pm(struct uart_port *port, u_int state, u_int oldstate)
 {
 	if (port->mapbase == _Ser1UTCR0) {
 		if (state)
-			ASSABET_BCR_clear(ASSABET_BCR_RS232EN |
-					  ASSABET_BCR_COM_RTS |
-					  ASSABET_BCR_COM_DTR);
-		else
-			ASSABET_BCR_set(ASSABET_BCR_RS232EN |
-					ASSABET_BCR_COM_RTS |
-					ASSABET_BCR_COM_DTR);
-	}
-}
-
-/*
- * Assabet uses COM_RTS and COM_DTR for both UART1 (com port)
- * and UART3 (radio module).  We only handle them for UART1 here.
- */
-static void assabet_set_mctrl(struct uart_port *port, u_int mctrl)
-{
-	if (port->mapbase == _Ser1UTCR0) {
-		u_int set = 0, clear = 0;
-
-		if (mctrl & TIOCM_RTS)
-			clear |= ASSABET_BCR_COM_RTS;
+			ASSABET_BCR_clear(ASSABET_BCR_RS232EN);
 		else
-			set |= ASSABET_BCR_COM_RTS;
-
-		if (mctrl & TIOCM_DTR)
-			clear |= ASSABET_BCR_COM_DTR;
-		else
-			set |= ASSABET_BCR_COM_DTR;
-
-		ASSABET_BCR_clear(clear);
-		ASSABET_BCR_set(set);
-	}
-}
-
-static u_int assabet_get_mctrl(struct uart_port *port)
-{
-	u_int ret = 0;
-	u_int bsr = ASSABET_BSR;
-
-	/* need 2 reads to read current value */
-	bsr = ASSABET_BSR;
-
-	if (port->mapbase == _Ser1UTCR0) {
-		if (bsr & ASSABET_BSR_COM_DCD)
-			ret |= TIOCM_CD;
-		if (bsr & ASSABET_BSR_COM_CTS)
-			ret |= TIOCM_CTS;
-		if (bsr & ASSABET_BSR_COM_DSR)
-			ret |= TIOCM_DSR;
-	} else if (port->mapbase == _Ser3UTCR0) {
-		if (bsr & ASSABET_BSR_RAD_DCD)
-			ret |= TIOCM_CD;
-		if (bsr & ASSABET_BSR_RAD_CTS)
-			ret |= TIOCM_CTS;
-		if (bsr & ASSABET_BSR_RAD_DSR)
-			ret |= TIOCM_DSR;
-		if (bsr & ASSABET_BSR_RAD_RI)
-			ret |= TIOCM_RI;
-	} else {
-		ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR;
+			ASSABET_BCR_set(ASSABET_BCR_RS232EN);
 	}
-
-	return ret;
 }
 
 static struct sa1100_port_fns assabet_port_fns __initdata = {
-	.set_mctrl	= assabet_set_mctrl,
-	.get_mctrl	= assabet_get_mctrl,
 	.pm		= assabet_uart_pm,
 };
 
diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c
index bc0e0e24ecb7..de79f3502045 100644
--- a/arch/arm/mach-sa1100/badge4.c
+++ b/arch/arm/mach-sa1100/badge4.c
@@ -311,8 +311,6 @@ badge4_uart_pm(struct uart_port *port, u_int state, u_int oldstate)
 }
 
 static struct sa1100_port_fns badge4_port_fns __initdata = {
-	//.get_mctrl	= badge4_get_mctrl,
-	//.set_mctrl	= badge4_set_mctrl,
 	.pm		= badge4_uart_pm,
 };
 
diff --git a/arch/arm/mach-sa1100/clock.c b/arch/arm/mach-sa1100/clock.c
index 6199e87447ca..e8691921c69a 100644
--- a/arch/arm/mach-sa1100/clock.c
+++ b/arch/arm/mach-sa1100/clock.c
@@ -2,176 +2,144 @@
 /*
  *  linux/arch/arm/mach-sa1100/clock.c
  */
-#include <linux/module.h>
 #include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/list.h>
 #include <linux/errno.h>
 #include <linux/err.h>
-#include <linux/string.h>
 #include <linux/clk.h>
-#include <linux/spinlock.h>
-#include <linux/mutex.h>
-#include <linux/io.h>
 #include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/spinlock.h>
 
 #include <mach/hardware.h>
 #include <mach/generic.h>
 
-struct clkops {
-	void			(*enable)(struct clk *);
-	void			(*disable)(struct clk *);
-	unsigned long		(*get_rate)(struct clk *);
+static const char * const clk_tucr_parents[] = {
+	"clk32768", "clk3686400",
 };
 
-struct clk {
-	const struct clkops	*ops;
-	unsigned int		enabled;
-};
-
-#define DEFINE_CLK(_name, _ops)				\
-struct clk clk_##_name = {				\
-		.ops	= _ops,				\
-	}
-
-static DEFINE_SPINLOCK(clocks_lock);
-
-/* Dummy clk routine to build generic kernel parts that may be using them */
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	return clk_get_rate(clk);
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	return 0;
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
-	return 0;
-}
-EXPORT_SYMBOL(clk_set_parent);
+static DEFINE_SPINLOCK(tucr_lock);
 
-struct clk *clk_get_parent(struct clk *clk)
+static int clk_gpio27_enable(struct clk_hw *hw)
 {
-	return NULL;
-}
-EXPORT_SYMBOL(clk_get_parent);
+	unsigned long flags;
 
-static void clk_gpio27_enable(struct clk *clk)
-{
 	/*
 	 * First, set up the 3.6864MHz clock on GPIO 27 for the SA-1111:
 	 * (SA-1110 Developer's Manual, section 9.1.2.1)
 	 */
+	local_irq_save(flags);
 	GAFR |= GPIO_32_768kHz;
 	GPDR |= GPIO_32_768kHz;
-	TUCR = TUCR_3_6864MHz;
+	local_irq_restore(flags);
+
+	return 0;
 }
 
-static void clk_gpio27_disable(struct clk *clk)
+static void clk_gpio27_disable(struct clk_hw *hw)
 {
-	TUCR = 0;
+	unsigned long flags;
+
+	local_irq_save(flags);
 	GPDR &= ~GPIO_32_768kHz;
 	GAFR &= ~GPIO_32_768kHz;
+	local_irq_restore(flags);
 }
 
-static void clk_cpu_enable(struct clk *clk)
-{
-}
+static const struct clk_ops clk_gpio27_ops = {
+	.enable = clk_gpio27_enable,
+	.disable = clk_gpio27_disable,
+};
 
-static void clk_cpu_disable(struct clk *clk)
-{
-}
+static const char * const clk_gpio27_parents[] = {
+	"tucr-mux",
+};
 
-static unsigned long clk_cpu_get_rate(struct clk *clk)
+static const struct clk_init_data clk_gpio27_init_data __initconst = {
+	.name = "gpio27",
+	.ops = &clk_gpio27_ops,
+	.parent_names = clk_gpio27_parents,
+	.num_parents = ARRAY_SIZE(clk_gpio27_parents),
+};
+
+/*
+ * Derived from the table 8-1 in the SA1110 manual, the MPLL appears to
+ * multiply its input rate by 4 x (4 + PPCR).  This calculation gives
+ * the exact rate.  The figures given in the table are the rates rounded
+ * to 100kHz.  Stick with sa11x0_getspeed() for the time being.
+ */
+static unsigned long clk_mpll_recalc_rate(struct clk_hw *hw,
+	unsigned long prate)
 {
 	return sa11x0_getspeed(0) * 1000;
 }
 
-int clk_enable(struct clk *clk)
-{
-	unsigned long flags;
-
-	if (clk) {
-		spin_lock_irqsave(&clocks_lock, flags);
-		if (clk->enabled++ == 0)
-			clk->ops->enable(clk);
-		spin_unlock_irqrestore(&clocks_lock, flags);
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL(clk_enable);
+static const struct clk_ops clk_mpll_ops = {
+	.recalc_rate = clk_mpll_recalc_rate,
+};
 
-void clk_disable(struct clk *clk)
-{
-	unsigned long flags;
+static const char * const clk_mpll_parents[] = {
+	"clk3686400",
+};
 
-	if (clk) {
-		WARN_ON(clk->enabled == 0);
-		spin_lock_irqsave(&clocks_lock, flags);
-		if (--clk->enabled == 0)
-			clk->ops->disable(clk);
-		spin_unlock_irqrestore(&clocks_lock, flags);
-	}
-}
-EXPORT_SYMBOL(clk_disable);
+static const struct clk_init_data clk_mpll_init_data __initconst = {
+	.name = "mpll",
+	.ops = &clk_mpll_ops,
+	.parent_names = clk_mpll_parents,
+	.num_parents = ARRAY_SIZE(clk_mpll_parents),
+	.flags = CLK_GET_RATE_NOCACHE | CLK_IS_CRITICAL,
+};
 
-unsigned long clk_get_rate(struct clk *clk)
+int __init sa11xx_clk_init(void)
 {
-	if (clk && clk->ops && clk->ops->get_rate)
-		return clk->ops->get_rate(clk);
-
-	return 0;
-}
-EXPORT_SYMBOL(clk_get_rate);
+	struct clk_hw *hw;
+	int ret;
 
-const struct clkops clk_gpio27_ops = {
-	.enable		= clk_gpio27_enable,
-	.disable	= clk_gpio27_disable,
-};
+	hw = clk_hw_register_fixed_rate(NULL, "clk32768", NULL, 0, 32768);
+	if (IS_ERR(hw))
+		return PTR_ERR(hw);
 
-const struct clkops clk_cpu_ops = {
-	.enable		= clk_cpu_enable,
-	.disable	= clk_cpu_disable,
-	.get_rate	= clk_cpu_get_rate,
-};
+	clk_hw_register_clkdev(hw, NULL, "sa1100-rtc");
 
-static DEFINE_CLK(gpio27, &clk_gpio27_ops);
+	hw = clk_hw_register_fixed_rate(NULL, "clk3686400", NULL, 0, 3686400);
+	if (IS_ERR(hw))
+		return PTR_ERR(hw);
 
-static DEFINE_CLK(cpu, &clk_cpu_ops);
+	clk_hw_register_clkdev(hw, "OSTIMER0", NULL);
 
-static unsigned long clk_36864_get_rate(struct clk *clk)
-{
-	return 3686400;
-}
+	hw = kzalloc(sizeof(*hw), GFP_KERNEL);
+	if (!hw)
+		return -ENOMEM;
+	hw->init = &clk_mpll_init_data;
+	ret = clk_hw_register(NULL, hw);
+	if (ret) {
+		kfree(hw);
+		return ret;
+	}
 
-static struct clkops clk_36864_ops = {
-	.enable		= clk_cpu_enable,
-	.disable	= clk_cpu_disable,
-	.get_rate	= clk_36864_get_rate,
-};
+	clk_hw_register_clkdev(hw, NULL, "sa11x0-fb");
+	clk_hw_register_clkdev(hw, NULL, "sa11x0-pcmcia");
+	clk_hw_register_clkdev(hw, NULL, "sa11x0-pcmcia.0");
+	clk_hw_register_clkdev(hw, NULL, "sa11x0-pcmcia.1");
+	clk_hw_register_clkdev(hw, NULL, "1800");
+
+	hw = clk_hw_register_mux(NULL, "tucr-mux", clk_tucr_parents,
+				 ARRAY_SIZE(clk_tucr_parents), 0,
+				 (void __iomem *)&TUCR, FShft(TUCR_TSEL),
+				 FAlnMsk(TUCR_TSEL), 0, &tucr_lock);
+	clk_set_rate(hw->clk, 3686400);
+
+	hw = kzalloc(sizeof(*hw), GFP_KERNEL);
+	if (!hw)
+		return -ENOMEM;
+	hw->init = &clk_gpio27_init_data;
+	ret = clk_hw_register(NULL, hw);
+	if (ret) {
+		kfree(hw);
+		return ret;
+	}
 
-static DEFINE_CLK(36864, &clk_36864_ops);
-
-static struct clk_lookup sa11xx_clkregs[] = {
-	CLKDEV_INIT("sa1111.0", NULL, &clk_gpio27),
-	CLKDEV_INIT("sa1100-rtc", NULL, NULL),
-	CLKDEV_INIT("sa11x0-fb", NULL, &clk_cpu),
-	CLKDEV_INIT("sa11x0-pcmcia", NULL, &clk_cpu),
-	CLKDEV_INIT("sa11x0-pcmcia.0", NULL, &clk_cpu),
-	CLKDEV_INIT("sa11x0-pcmcia.1", NULL, &clk_cpu),
-	/* sa1111 names devices using internal offsets, PCMCIA is at 0x1800 */
-	CLKDEV_INIT("1800", NULL, &clk_cpu),
-	CLKDEV_INIT(NULL, "OSTIMER0", &clk_36864),
-};
+	clk_hw_register_clkdev(hw, NULL, "sa1111.0");
 
-int __init sa11xx_clk_init(void)
-{
-	clkdev_add_table(sa11xx_clkregs, ARRAY_SIZE(sa11xx_clkregs));
 	return 0;
 }
diff --git a/arch/arm/mach-sa1100/h3xxx.c b/arch/arm/mach-sa1100/h3xxx.c
index e93e3a1d60d5..d685f03f51f3 100644
--- a/arch/arm/mach-sa1100/h3xxx.c
+++ b/arch/arm/mach-sa1100/h3xxx.c
@@ -83,57 +83,6 @@ static struct resource h3xxx_flash_resource =
 /*
  * H3xxx uart support
  */
-static struct gpio h3xxx_uart_gpio[] = {
-	{ H3XXX_GPIO_COM_DCD,	GPIOF_IN,		"COM DCD" },
-	{ H3XXX_GPIO_COM_CTS,	GPIOF_IN,		"COM CTS" },
-	{ H3XXX_GPIO_COM_RTS,	GPIOF_OUT_INIT_LOW,	"COM RTS" },
-};
-
-static bool h3xxx_uart_request_gpios(void)
-{
-	static bool h3xxx_uart_gpio_ok;
-	int rc;
-
-	if (h3xxx_uart_gpio_ok)
-		return true;
-
-	rc = gpio_request_array(h3xxx_uart_gpio, ARRAY_SIZE(h3xxx_uart_gpio));
-	if (rc)
-		pr_err("h3xxx_uart_request_gpios: error %d\n", rc);
-	else
-		h3xxx_uart_gpio_ok = true;
-
-	return h3xxx_uart_gpio_ok;
-}
-
-static void h3xxx_uart_set_mctrl(struct uart_port *port, u_int mctrl)
-{
-	if (port->mapbase == _Ser3UTCR0) {
-		if (!h3xxx_uart_request_gpios())
-			return;
-		gpio_set_value(H3XXX_GPIO_COM_RTS, !(mctrl & TIOCM_RTS));
-	}
-}
-
-static u_int h3xxx_uart_get_mctrl(struct uart_port *port)
-{
-	u_int ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR;
-
-	if (port->mapbase == _Ser3UTCR0) {
-		if (!h3xxx_uart_request_gpios())
-			return ret;
-		/*
-		 * DCD and CTS bits are inverted in GPLR by RS232 transceiver
-		 */
-		if (gpio_get_value(H3XXX_GPIO_COM_DCD))
-			ret &= ~TIOCM_CD;
-		if (gpio_get_value(H3XXX_GPIO_COM_CTS))
-			ret &= ~TIOCM_CTS;
-	}
-
-	return ret;
-}
-
 static void h3xxx_uart_pm(struct uart_port *port, u_int state, u_int oldstate)
 {
 	if (port->mapbase == _Ser3UTCR0) {
@@ -166,12 +115,20 @@ static int h3xxx_uart_set_wake(struct uart_port *port, u_int enable)
 }
 
 static struct sa1100_port_fns h3xxx_port_fns __initdata = {
-	.set_mctrl	= h3xxx_uart_set_mctrl,
-	.get_mctrl	= h3xxx_uart_get_mctrl,
 	.pm		= h3xxx_uart_pm,
 	.set_wake	= h3xxx_uart_set_wake,
 };
 
+static struct gpiod_lookup_table h3xxx_uart3_gpio_table = {
+	.dev_id = "sa11x0-uart.3",
+	.table = {
+		GPIO_LOOKUP("gpio", H3XXX_GPIO_COM_DCD, "dcd", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("gpio", H3XXX_GPIO_COM_CTS, "cts", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("gpio", H3XXX_GPIO_COM_RTS, "rts", GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
 /*
  * EGPIO
  */
@@ -279,6 +236,7 @@ static struct gpiod_lookup_table h3xxx_pcmcia_gpio_table = {
 void __init h3xxx_mach_init(void)
 {
 	gpiod_add_lookup_table(&h3xxx_pcmcia_gpio_table);
+	gpiod_add_lookup_table(&h3xxx_uart3_gpio_table);
 	sa1100_register_uart_fns(&h3xxx_port_fns);
 	sa11x0_register_mtd(&h3xxx_flash_data, &h3xxx_flash_resource, 1);
 	platform_add_devices(h3xxx_devices, ARRAY_SIZE(h3xxx_devices));
diff --git a/arch/arm/mach-sa1100/hackkit.c b/arch/arm/mach-sa1100/hackkit.c
index 4f4c1bb890e0..6d37d263e0d2 100644
--- a/arch/arm/mach-sa1100/hackkit.c
+++ b/arch/arm/mach-sa1100/hackkit.c
@@ -45,8 +45,6 @@
 /* init funcs */
 static void __init hackkit_map_io(void);
 
-static u_int hackkit_get_mctrl(struct uart_port *port);
-static void hackkit_set_mctrl(struct uart_port *port, u_int mctrl);
 static void hackkit_uart_pm(struct uart_port *port, u_int state, u_int oldstate);
 
 /**********************************************************************
@@ -67,8 +65,6 @@ static struct map_desc hackkit_io_desc[] __initdata = {
 };
 
 static struct sa1100_port_fns hackkit_port_fns __initdata = {
-	.set_mctrl	= hackkit_set_mctrl,
-	.get_mctrl	= hackkit_get_mctrl,
 	.pm		= hackkit_uart_pm,
 };
 
@@ -101,50 +97,6 @@ static void hackkit_uart_pm(struct uart_port *port, u_int state, u_int oldstate)
 	/* TODO: switch on/off uart in powersave mode */
 }
 
-/*
- * Note! this can be called from IRQ context.
- * FIXME: No modem ctrl lines yet.
- */
-static void hackkit_set_mctrl(struct uart_port *port, u_int mctrl)
-{
-#if 0
-	if (port->mapbase == _Ser1UTCR0) {
-		u_int set = 0, clear = 0;
-
-		if (mctrl & TIOCM_RTS)
-			set |= PT_CTRL2_RS1_RTS;
-		else
-			clear |= PT_CTRL2_RS1_RTS;
-
-		if (mctrl & TIOCM_DTR)
-			set |= PT_CTRL2_RS1_DTR;
-		else
-			clear |= PT_CTRL2_RS1_DTR;
-
-		PTCTRL2_clear(clear);
-		PTCTRL2_set(set);
-	}
-#endif
-}
-
-static u_int hackkit_get_mctrl(struct uart_port *port)
-{
-	u_int ret = 0;
-#if 0
-	u_int irqsr = PT_IRQSR;
-
-	/* need 2 reads to read current value */
-	irqsr = PT_IRQSR;
-
-	/* TODO: check IRQ source register for modem/com
-	 status lines and set them correctly. */
-#endif
-
-	ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR;
-
-	return ret;
-}
-
 static struct mtd_partition hackkit_partitions[] = {
 	{
 		.name		= "BLOB",
diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c
index a671e4c994cf..6876bc1e33b4 100644
--- a/arch/arm/mach-sa1100/neponset.c
+++ b/arch/arm/mach-sa1100/neponset.c
@@ -11,7 +11,6 @@
 #include <linux/irq.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/platform_data/sa11x0-serial.h>
 #include <linux/platform_device.h>
 #include <linux/pm.h>
 #include <linux/serial_core.h>
@@ -49,23 +48,8 @@
 #define IRR_SA1111	(1 << 2)
 
 #define NCR_NGPIO	7
-
-#define MDM_CTL0_RTS1	(1 << 0)
-#define MDM_CTL0_DTR1	(1 << 1)
-#define MDM_CTL0_RTS2	(1 << 2)
-#define MDM_CTL0_DTR2	(1 << 3)
 #define MDM_CTL0_NGPIO	4
-
-#define MDM_CTL1_CTS1	(1 << 0)
-#define MDM_CTL1_DSR1	(1 << 1)
-#define MDM_CTL1_DCD1	(1 << 2)
-#define MDM_CTL1_CTS2	(1 << 3)
-#define MDM_CTL1_DSR2	(1 << 4)
-#define MDM_CTL1_DCD2	(1 << 5)
 #define MDM_CTL1_NGPIO	6
-
-#define AUD_SEL_1341	(1 << 0)
-#define AUD_MUTE_1341	(1 << 1)
 #define AUD_NGPIO	2
 
 extern void sa1110_mb_disable(void);
@@ -97,6 +81,30 @@ struct neponset_drvdata {
 	struct gpio_chip *gpio[4];
 };
 
+static struct gpiod_lookup_table neponset_uart1_gpio_table = {
+	.dev_id = "sa11x0-uart.1",
+	.table = {
+		GPIO_LOOKUP("neponset-mdm-ctl0", 2, "rts", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("neponset-mdm-ctl0", 3, "dtr", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("neponset-mdm-ctl1", 3, "cts", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("neponset-mdm-ctl1", 4, "dsr", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("neponset-mdm-ctl1", 5, "dcd", GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
+static struct gpiod_lookup_table neponset_uart3_gpio_table = {
+	.dev_id = "sa11x0-uart.3",
+	.table = {
+		GPIO_LOOKUP("neponset-mdm-ctl0", 0, "rts", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("neponset-mdm-ctl0", 1, "dtr", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("neponset-mdm-ctl1", 0, "cts", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("neponset-mdm-ctl1", 1, "dsr", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("neponset-mdm-ctl1", 2, "dcd", GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
 static struct gpiod_lookup_table neponset_pcmcia_table = {
 	.dev_id = "1800",
 	.table = {
@@ -124,69 +132,6 @@ void neponset_ncr_frob(unsigned int mask, unsigned int val)
 }
 EXPORT_SYMBOL(neponset_ncr_frob);
 
-static void neponset_set_mctrl(struct uart_port *port, u_int mctrl)
-{
-	struct neponset_drvdata *n = nep;
-	unsigned long mask, val = 0;
-
-	if (!n)
-		return;
-
-	if (port->mapbase == _Ser1UTCR0) {
-		mask = MDM_CTL0_RTS2 | MDM_CTL0_DTR2;
-
-		if (!(mctrl & TIOCM_RTS))
-			val |= MDM_CTL0_RTS2;
-
-		if (!(mctrl & TIOCM_DTR))
-			val |= MDM_CTL0_DTR2;
-	} else if (port->mapbase == _Ser3UTCR0) {
-		mask = MDM_CTL0_RTS1 | MDM_CTL0_DTR1;
-
-		if (!(mctrl & TIOCM_RTS))
-			val |= MDM_CTL0_RTS1;
-
-		if (!(mctrl & TIOCM_DTR))
-			val |= MDM_CTL0_DTR1;
-	}
-
-	n->gpio[1]->set_multiple(n->gpio[1], &mask, &val);
-}
-
-static u_int neponset_get_mctrl(struct uart_port *port)
-{
-	void __iomem *base = nep->base;
-	u_int ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR;
-	u_int mdm_ctl1;
-
-	if (!base)
-		return ret;
-
-	mdm_ctl1 = readb_relaxed(base + MDM_CTL_1);
-	if (port->mapbase == _Ser1UTCR0) {
-		if (mdm_ctl1 & MDM_CTL1_DCD2)
-			ret &= ~TIOCM_CD;
-		if (mdm_ctl1 & MDM_CTL1_CTS2)
-			ret &= ~TIOCM_CTS;
-		if (mdm_ctl1 & MDM_CTL1_DSR2)
-			ret &= ~TIOCM_DSR;
-	} else if (port->mapbase == _Ser3UTCR0) {
-		if (mdm_ctl1 & MDM_CTL1_DCD1)
-			ret &= ~TIOCM_CD;
-		if (mdm_ctl1 & MDM_CTL1_CTS1)
-			ret &= ~TIOCM_CTS;
-		if (mdm_ctl1 & MDM_CTL1_DSR1)
-			ret &= ~TIOCM_DSR;
-	}
-
-	return ret;
-}
-
-static struct sa1100_port_fns neponset_port_fns = {
-	.set_mctrl	= neponset_set_mctrl,
-	.get_mctrl	= neponset_get_mctrl,
-};
-
 /*
  * Install handler for Neponset IRQ.  Note that we have to loop here
  * since the ETHERNET and USAR IRQs are level based, and we need to
@@ -388,6 +333,8 @@ static int neponset_probe(struct platform_device *dev)
 			   d->base + AUD_CTL, AUD_NGPIO, false,
 			   neponset_aud_names);
 
+	gpiod_add_lookup_table(&neponset_uart1_gpio_table);
+	gpiod_add_lookup_table(&neponset_uart3_gpio_table);
 	gpiod_add_lookup_table(&neponset_pcmcia_table);
 
 	/*
@@ -402,8 +349,6 @@ static int neponset_probe(struct platform_device *dev)
 		 d->irq_base, d->irq_base + NEP_IRQ_NR - 1);
 	nep = d;
 
-	sa1100_register_uart_fns(&neponset_port_fns);
-
 	/* Ensure that the memory bus request/grant signals are setup */
 	sa1110_mb_disable();
 
@@ -442,6 +387,8 @@ static int neponset_remove(struct platform_device *dev)
 		platform_device_unregister(d->smc91x);
 
 	gpiod_remove_lookup_table(&neponset_pcmcia_table);
+	gpiod_remove_lookup_table(&neponset_uart3_gpio_table);
+	gpiod_remove_lookup_table(&neponset_uart1_gpio_table);
 
 	irq_set_chained_handler(irq, NULL);
 	irq_free_descs(d->irq_base, NEP_IRQ_NR);
diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c
index eea60b20c6b4..9e4bc1865f84 100644
--- a/arch/arm/mach-shmobile/setup-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c
@@ -17,6 +17,7 @@
 #include <linux/of.h>
 #include <linux/of_fdt.h>
 #include <linux/of_platform.h>
+#include <linux/psci.h>
 #include <asm/mach/arch.h>
 #include <asm/secure_cntvoff.h>
 #include "common.h"
@@ -60,9 +61,24 @@ static unsigned int __init get_extal_freq(void)
 
 void __init rcar_gen2_timer_init(void)
 {
+	bool need_update = true;
 	void __iomem *base;
 	u32 freq;
 
+	/*
+	 * If PSCI is available then most likely we are running on PSCI-enabled
+	 * U-Boot which, we assume, has already taken care of resetting CNTVOFF
+	 * and updating counter module before switching to non-secure mode
+	 * and we don't need to.
+	 */
+#ifdef CONFIG_ARM_PSCI_FW
+	if (psci_ops.cpu_on)
+		need_update = false;
+#endif
+
+	if (need_update == false)
+		goto skip_update;
+
 	secure_cntvoff_init();
 
 	if (of_machine_is_compatible("renesas,r8a7745") ||
@@ -102,6 +118,7 @@ void __init rcar_gen2_timer_init(void)
 
 	iounmap(base);
 
+skip_update:
 	of_clk_init(NULL);
 	timer_probe();
 }
diff --git a/arch/arm/mach-stm32/Kconfig b/arch/arm/mach-stm32/Kconfig
index 05d6b5aada80..57699bd8f107 100644
--- a/arch/arm/mach-stm32/Kconfig
+++ b/arch/arm/mach-stm32/Kconfig
@@ -1,6 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0-only
 menuconfig ARCH_STM32
-	bool "STMicroelectronics STM32 family" if ARM_SINGLE_ARMV7M || ARCH_MULTI_V7
+	bool "STMicroelectronics STM32 family"
+	depends on ARM_SINGLE_ARMV7M || ARCH_MULTI_V7
 	select ARMV7M_SYSTICK if ARM_SINGLE_ARMV7M
 	select HAVE_ARM_ARCH_TIMER if ARCH_MULTI_V7
 	select ARM_GIC if ARCH_MULTI_V7
diff --git a/arch/arm/mach-tango/Makefile b/arch/arm/mach-tango/Makefile
index da6c633d3cc0..97cd04508fa1 100644
--- a/arch/arm/mach-tango/Makefile
+++ b/arch/arm/mach-tango/Makefile
@@ -1,7 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0
-plus_sec := $(call as-instr,.arch_extension sec,+sec)
-AFLAGS_smc.o := -Wa,-march=armv7-a$(plus_sec)
-
 obj-y += setup.o smc.o
 obj-$(CONFIG_SMP) += platsmp.o
 obj-$(CONFIG_SUSPEND) += pm.o
diff --git a/arch/arm/mach-tango/smc.S b/arch/arm/mach-tango/smc.S
index 361a8dc89804..b1752aaa72bc 100644
--- a/arch/arm/mach-tango/smc.S
+++ b/arch/arm/mach-tango/smc.S
@@ -1,6 +1,8 @@
 /* SPDX-License-Identifier: GPL-2.0 */
 #include <linux/linkage.h>
 
+	.arch armv7-a
+	.arch_extension sec
 ENTRY(tango_smc)
 	push	{lr}
 	mov	ip, r1
diff --git a/arch/arm/mach-versatile/versatile_dt.c b/arch/arm/mach-versatile/versatile_dt.c
index 0b763239c0f8..c00ea4f77af6 100644
--- a/arch/arm/mach-versatile/versatile_dt.c
+++ b/arch/arm/mach-versatile/versatile_dt.c
@@ -16,8 +16,6 @@
 #include <linux/of_platform.h>
 #include <linux/slab.h>
 #include <linux/amba/bus.h>
-#include <linux/amba/clcd.h>
-#include <linux/platform_data/video-clcd-versatile.h>
 #include <linux/amba/mmci.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -34,14 +32,12 @@
  */
 #define VERSATILE_SYS_PCICTL_OFFSET           0x44
 #define VERSATILE_SYS_MCI_OFFSET              0x48
-#define VERSATILE_SYS_CLCD_OFFSET             0x50
 
 /*
  * VERSATILE peripheral addresses
  */
 #define VERSATILE_MMCI0_BASE           0x10005000	/* MMC interface */
 #define VERSATILE_MMCI1_BASE           0x1000B000	/* MMC Interface */
-#define VERSATILE_CLCD_BASE            0x10120000	/* CLCD */
 #define VERSATILE_SCTL_BASE            0x101E0000	/* System controller */
 #define VERSATILE_IB2_BASE             0x24000000	/* IB2 module */
 #define VERSATILE_IB2_CTL_BASE		(VERSATILE_IB2_BASE + 0x03000000)
@@ -84,158 +80,6 @@ static struct mmci_platform_data mmc1_plat_data = {
 };
 
 /*
- * CLCD support.
- */
-#define SYS_CLCD_MODE_MASK	(3 << 0)
-#define SYS_CLCD_MODE_888	(0 << 0)
-#define SYS_CLCD_MODE_5551	(1 << 0)
-#define SYS_CLCD_MODE_565_RLSB	(2 << 0)
-#define SYS_CLCD_MODE_565_BLSB	(3 << 0)
-#define SYS_CLCD_NLCDIOON	(1 << 2)
-#define SYS_CLCD_VDDPOSSWITCH	(1 << 3)
-#define SYS_CLCD_PWR3V5SWITCH	(1 << 4)
-#define SYS_CLCD_ID_MASK	(0x1f << 8)
-#define SYS_CLCD_ID_SANYO_3_8	(0x00 << 8)
-#define SYS_CLCD_ID_UNKNOWN_8_4	(0x01 << 8)
-#define SYS_CLCD_ID_EPSON_2_2	(0x02 << 8)
-#define SYS_CLCD_ID_SANYO_2_5	(0x07 << 8)
-#define SYS_CLCD_ID_VGA		(0x1f << 8)
-
-static bool is_sanyo_2_5_lcd;
-
-/*
- * Disable all display connectors on the interface module.
- */
-static void versatile_clcd_disable(struct clcd_fb *fb)
-{
-	void __iomem *sys_clcd = versatile_sys_base + VERSATILE_SYS_CLCD_OFFSET;
-	u32 val;
-
-	val = readl(sys_clcd);
-	val &= ~SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
-	writel(val, sys_clcd);
-
-	/*
-	 * If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light off
-	 */
-	if (of_machine_is_compatible("arm,versatile-ab") && is_sanyo_2_5_lcd) {
-		unsigned long ctrl;
-
-		ctrl = readl(versatile_ib2_ctrl);
-		ctrl &= ~0x01;
-		writel(ctrl, versatile_ib2_ctrl);
-	}
-}
-
-/*
- * Enable the relevant connector on the interface module.
- */
-static void versatile_clcd_enable(struct clcd_fb *fb)
-{
-	struct fb_var_screeninfo *var = &fb->fb.var;
-	void __iomem *sys_clcd = versatile_sys_base + VERSATILE_SYS_CLCD_OFFSET;
-	u32 val;
-
-	val = readl(sys_clcd);
-	val &= ~SYS_CLCD_MODE_MASK;
-
-	switch (var->green.length) {
-	case 5:
-		val |= SYS_CLCD_MODE_5551;
-		break;
-	case 6:
-		if (var->red.offset == 0)
-			val |= SYS_CLCD_MODE_565_RLSB;
-		else
-			val |= SYS_CLCD_MODE_565_BLSB;
-		break;
-	case 8:
-		val |= SYS_CLCD_MODE_888;
-		break;
-	}
-
-	/*
-	 * Set the MUX
-	 */
-	writel(val, sys_clcd);
-
-	/*
-	 * And now enable the PSUs
-	 */
-	val |= SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
-	writel(val, sys_clcd);
-
-	/*
-	 * If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light on
-	 */
-	if (of_machine_is_compatible("arm,versatile-ab") && is_sanyo_2_5_lcd) {
-		unsigned long ctrl;
-
-		ctrl = readl(versatile_ib2_ctrl);
-		ctrl |= 0x01;
-		writel(ctrl, versatile_ib2_ctrl);
-	}
-}
-
-/*
- * Detect which LCD panel is connected, and return the appropriate
- * clcd_panel structure.  Note: we do not have any information on
- * the required timings for the 8.4in panel, so we presently assume
- * VGA timings.
- */
-static int versatile_clcd_setup(struct clcd_fb *fb)
-{
-	void __iomem *sys_clcd = versatile_sys_base + VERSATILE_SYS_CLCD_OFFSET;
-	const char *panel_name;
-	u32 val;
-
-	is_sanyo_2_5_lcd = false;
-
-	val = readl(sys_clcd) & SYS_CLCD_ID_MASK;
-	if (val == SYS_CLCD_ID_SANYO_3_8)
-		panel_name = "Sanyo TM38QV67A02A";
-	else if (val == SYS_CLCD_ID_SANYO_2_5) {
-		panel_name = "Sanyo QVGA Portrait";
-		is_sanyo_2_5_lcd = true;
-	} else if (val == SYS_CLCD_ID_EPSON_2_2)
-		panel_name = "Epson L2F50113T00";
-	else if (val == SYS_CLCD_ID_VGA)
-		panel_name = "VGA";
-	else {
-		printk(KERN_ERR "CLCD: unknown LCD panel ID 0x%08x, using VGA\n",
-			val);
-		panel_name = "VGA";
-	}
-
-	fb->panel = versatile_clcd_get_panel(panel_name);
-	if (!fb->panel)
-		return -EINVAL;
-
-	return versatile_clcd_setup_dma(fb, SZ_1M);
-}
-
-static void versatile_clcd_decode(struct clcd_fb *fb, struct clcd_regs *regs)
-{
-	clcdfb_decode(fb, regs);
-
-	/* Always clear BGR for RGB565: we do the routing externally */
-	if (fb->fb.var.green.length == 6)
-		regs->cntl &= ~CNTL_BGR;
-}
-
-static struct clcd_board clcd_plat_data = {
-	.name		= "Versatile",
-	.caps		= CLCD_CAP_5551 | CLCD_CAP_565 | CLCD_CAP_888,
-	.check		= clcdfb_check,
-	.decode		= versatile_clcd_decode,
-	.disable	= versatile_clcd_disable,
-	.enable		= versatile_clcd_enable,
-	.setup		= versatile_clcd_setup,
-	.mmap		= versatile_clcd_mmap_dma,
-	.remove		= versatile_clcd_remove_dma,
-};
-
-/*
  * Lookup table for attaching a specific name and platform_data pointer to
  * devices as they get created by of_platform_populate().  Ideally this table
  * would not exist, but the current clock implementation depends on some devices
@@ -244,7 +88,6 @@ static struct clcd_board clcd_plat_data = {
 struct of_dev_auxdata versatile_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("arm,primecell", VERSATILE_MMCI0_BASE, "fpga:05", &mmc0_plat_data),
 	OF_DEV_AUXDATA("arm,primecell", VERSATILE_MMCI1_BASE, "fpga:0b", &mmc1_plat_data),
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_CLCD_BASE, "dev:20", &clcd_plat_data),
 	{}
 };
 
@@ -299,12 +142,12 @@ static void __init versatile_dt_pci_init(void)
 		 * driver had it so we will keep it.
 		 */
 		writel(1, versatile_sys_base + VERSATILE_SYS_PCICTL_OFFSET);
-		return;
+		goto out_put_node;
 	}
 
 	newprop = kzalloc(sizeof(*newprop), GFP_KERNEL);
 	if (!newprop)
-		return;
+		goto out_put_node;
 
 	newprop->name = kstrdup("status", GFP_KERNEL);
 	newprop->value = kstrdup("disabled", GFP_KERNEL);
@@ -312,6 +155,9 @@ static void __init versatile_dt_pci_init(void)
 	of_update_property(np, newprop);
 
 	pr_info("Not plugged into PCI backplane!\n");
+
+out_put_node:
+	of_node_put(np);
 }
 
 static void __init versatile_dt_init(void)