Merge tag 'armsoc-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM/arm64 Devicetree updates from Olof Johansson: "As usual, device tree updates is the bulk of our material in this merge window. This time around, 559 patches affecting both 32- and 64-bit platforms. Changes are too many to list individually, but some of the larger ones: New platform/SoC support: - Automotive: + Renesas R-Car D3 (R8A77995) + TI DT76x + MediaTek mt2712e - Communication-oriented: + Qualcomm IPQ8074 + Broadcom Stingray + Marvell Armada 8080 - Set top box: + Uniphier PXs3 Besides some vendor reference boards for the SoC above, there are also several new boards/machines: - TI AM335x Moxa UC-8100-ME-T open platform - TI AM57xx Beaglebone X15 Rev C - Microchip/Atmel sama5d27 SoM1 EK - Broadcom Raspberry Pi Zero W - Gemini-based D-Link DIR-685 router - Freescale i.MX6: + Toradex Apalis module + Apalis and Ixora carrier boards + Engicam GEAM6UL Starter Kit - Freescale i.MX53-based Beckhoff CX9020 Embedded PC - Mediatek mt7623-based BananaPi R2 - Several Allwinner-based single-board computers: + Cubietruck plus + Bananapi M3, M2M and M64 + NanoPi A64 + A64-OLinuXino + Pine64 - Rockchip RK3328 Pine64/Rock64 board support - Rockchip RK3399 boards: + RK3399 Sapphire module on Excavator carrier (RK3399 reference design) + Theobroma Systems RK3399-Q7 SoM - ZTE ZX296718 PCBOX Board" * tag 'armsoc-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (559 commits) ARM: dts: at91: at91sam9g45: add AC97 arm64: dts: marvell: mcbin: enable more networking ports arm64: dts: marvell: add a reference to the sysctrl syscon in the ppv2 node arm64: dts: marvell: add TX interrupts for PPv2.2 arm64: dts: uniphier: add PXs3 SoC support ARM: dts: uniphier: add pinctrl groups of ethernet phy mode ARM: dts: uniphier: fix size of sdctrl nodes ARM: dts: uniphier: add AIDET nodes arm64: dts: uniphier: fix size of sdctrl node arm64: dts: uniphier: add AIDET nodes Revert "ARM: dts: sun8i: h3: Enable dwmac-sun8i on the Beelink X2" arm64: dts: uniphier: add reset controller node of analog amplifier arm64: dts: marvell: add Device Tree files for Armada-8KP arm64: dts: rockchip: add Haikou baseboard with RK3399-Q7 SoM arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM dt-bindings: add rk3399-q7 SoM ARM: dts: rockchip: enable usb for rv1108-evb ARM: dts: rockchip: add usb nodes for rv1108 SoCs dt-bindings: update grf-binding for rv1108 SoCs ARM: dts: aspeed-g4: fix AHB window size of the SMC controllers ...
author: Linus Torvalds <torvalds@linux-foundation.org> 2017-09-10 20:54:48 -0700
committer: Linus Torvalds <torvalds@linux-foundation.org> 2017-09-10 20:54:48 -0700
commit: e90937e756938f03d37d4cae7c82316a3a425944 (patch)
tree: 0667f5ac6ad368278e9658ba483c79d1a60a65cd /arch/arm64/boot
parent: ae46654bcff303b33facbbd04a3ad9c21d303f9b (diff)
parent: b884026a2b80529fc7a4de729b92ee0ba555bfed (diff)
download: talos-op-linux-e90937e756938f03d37d4cae7c82316a3a425944.tar.gz
talos-op-linux-e90937e756938f03d37d4cae7c82316a3a425944.zip
150 files changed, 9777 insertions, 428 deletions
diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
index 108f12ce6d1d..19c3fbd75eda 100644
--- a/arch/arm64/boot/dts/allwinner/Makefile
+++ b/arch/arm64/boot/dts/allwinner/Makefile
@@ -1,4 +1,6 @@
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-bananapi-m64.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-nanopi-a64.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-olinuxino.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-orangepi-win.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-plus.dtb sun50i-a64-pine64.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-sopine-baseboard.dtb
diff --git a/arch/arm64/boot/dts/allwinner/axp803.dtsi b/arch/arm64/boot/dts/allwinner/axp803.dtsi
new file mode 100644
index 000000000000..ff8af52743ff
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/axp803.dtsi
@@ -0,0 +1,150 @@
+/*
+ * Copyright 2017 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * AXP803 Integrated Power Management Chip
+ * http://files.pine64.org/doc/datasheet/pine64/AXP803_Datasheet_V1.0.pdf
+ */
+
+&axp803 {
+	interrupt-controller;
+	#interrupt-cells = <1>;
+
+	regulators {
+		/* Default work frequency for buck regulators */
+		x-powers,dcdc-freq = <3000>;
+
+		reg_aldo1: aldo1 {
+			regulator-name = "aldo1";
+		};
+
+		reg_aldo2: aldo2 {
+			regulator-name = "aldo2";
+		};
+
+		reg_aldo3: aldo3 {
+			regulator-name = "aldo3";
+		};
+
+		reg_dc1sw: dc1sw {
+			regulator-name = "dc1sw";
+		};
+
+		reg_dcdc1: dcdc1 {
+			regulator-name = "dcdc1";
+		};
+
+		reg_dcdc2: dcdc2 {
+			regulator-name = "dcdc2";
+		};
+
+		reg_dcdc3: dcdc3 {
+			regulator-name = "dcdc3";
+		};
+
+		reg_dcdc4: dcdc4 {
+			regulator-name = "dcdc4";
+		};
+
+		reg_dcdc5: dcdc5 {
+			regulator-name = "dcdc5";
+		};
+
+		reg_dcdc6: dcdc6 {
+			regulator-name = "dcdc6";
+		};
+
+		reg_dldo1: dldo1 {
+			regulator-name = "dldo1";
+		};
+
+		reg_dldo2: dldo2 {
+			regulator-name = "dldo2";
+		};
+
+		reg_dldo3: dldo3 {
+			regulator-name = "dldo3";
+		};
+
+		reg_dldo4: dldo4 {
+			regulator-name = "dldo4";
+		};
+
+		reg_eldo1: eldo1 {
+			regulator-name = "eldo1";
+		};
+
+		reg_eldo2: eldo2 {
+			regulator-name = "eldo2";
+		};
+
+		reg_eldo3: eldo3 {
+			regulator-name = "eldo3";
+		};
+
+		reg_fldo1: fldo1 {
+			regulator-name = "fldo1";
+		};
+
+		reg_fldo2: fldo2 {
+			regulator-name = "fldo2";
+		};
+
+		reg_ldo_io0: ldo-io0 {
+			regulator-name = "ldo-io0";
+			status = "disabled";
+		};
+
+		reg_ldo_io1: ldo-io1 {
+			regulator-name = "ldo-io1";
+			status = "disabled";
+		};
+
+		reg_rtc_ldo: rtc-ldo {
+			/* RTC_LDO is a fixed, always-on regulator */
+			regulator-always-on;
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-name = "rtc-ldo";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
index 6872135d7f84..d347f52e27f6 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
@@ -59,14 +59,16 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	reg_vcc3v3: vcc3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
 	};
 };
 
+&ehci1 {
+	status = "okay";
+};
+
 &i2c1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c1_pins>;
@@ -80,7 +82,7 @@
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins>;
-	vmmc-supply = <&reg_vcc3v3>;
+	vmmc-supply = <&reg_dcdc1>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
 	cd-inverted;
 	disable-wp;
@@ -91,22 +93,143 @@
 &mmc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins>;
-	vmmc-supply = <&reg_vcc3v3>;
+	vmmc-supply = <&reg_dldo2>;
+	vqmmc-supply = <&reg_dldo4>;
+	mmc-pwrseq = <&wifi_pwrseq>;
 	bus-width = <4>;
 	non-removable;
 	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&r_pio>;
+		interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* PL3 */
+		interrupt-names = "host-wake";
+	};
 };
 
 &mmc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc2_pins>;
-	vmmc-supply = <&reg_vcc3v3>;
+	vmmc-supply = <&reg_dcdc1>;
 	bus-width = <8>;
 	non-removable;
 	cap-mmc-hw-reset;
 	status = "okay";
 };
 
+&ohci1 {
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp803: pmic@3a3 {
+		compatible = "x-powers,axp803";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp803.dtsi"
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pl";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dc1sw {
+	regulator-name = "vcc-phy";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1040000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-cpux";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-hdmi-dsi";
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_dldo4 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-io";
+};
+
+&reg_eldo1 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "cpvdd";
+};
+
+&reg_fldo1 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-1v2-hsic";
+};
+
+/*
+ * The A64 chip cannot work without this regulator off, although
+ * it seems to be only driving the AR100 core.
+ * Maybe we don't still know well about CPUs domain.
+ */
+&reg_fldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins_a>;
@@ -118,3 +241,7 @@
 	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
 	status = "okay";
 };
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts
new file mode 100644
index 000000000000..2beef9e6cb88
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts
@@ -0,0 +1,207 @@
+/*
+ * Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "sun50i-a64.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "FriendlyARM NanoPi A64";
+	compatible = "friendlyarm,nanopi-a64", "allwinner,sun50i-a64";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+/* i2c1 connected with gpio headers like pine64, bananapi */
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	status = "disabled";
+};
+
+&i2c1_pins {
+	bias-pull-up;
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
+	cd-inverted;
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp803: pmic@3a3 {
+		compatible = "x-powers,axp803";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp803.dtsi"
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pl";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1040000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-cpux";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-hdmi-dsi";
+};
+
+&reg_dldo4 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-pg-wifi-io";
+};
+
+&reg_eldo1 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "cpvdd";
+};
+
+&reg_fldo1 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-1v2-hsic";
+};
+
+/*
+ * The A64 chip cannot work without this regulator off, although
+ * it seems to be only driving the AR100 core.
+ * Maybe we don't still know well about CPUs domain.
+ */
+&reg_fldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
new file mode 100644
index 000000000000..338e786155b1
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
@@ -0,0 +1,199 @@
+/*
+ * Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "sun50i-a64.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Olimex A64-Olinuxino";
+	compatible = "olimex,a64-olinuxino", "allwinner,sun50i-a64";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
+	cd-inverted;
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp803: pmic@3a3 {
+		compatible = "x-powers,axp803";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp803.dtsi"
+
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "vcc-pe";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pl";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1040000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-cpux";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-ddr3";
+};
+
+&reg_dcdc6 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-hdmi";
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-mipi";
+};
+
+&reg_dldo3 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "vcc-avdd-csi";
+};
+
+&reg_dldo4 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-io";
+};
+
+&reg_eldo1 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "cpvdd";
+};
+
+&reg_eldo2 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-dvdd-csi";
+};
+
+&reg_fldo1 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-1v2-hsic";
+};
+
+/*
+ * The A64 chip cannot work without this regulator off, although
+ * it seems to be only driving the AR100 core.
+ * Maybe we don't still know well about CPUs domain.
+ */
+&reg_fldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
index 7c533b6d4ba9..caf8b6fbe5e3 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
@@ -107,6 +107,118 @@
 	status = "okay";
 };
 
+&r_rsb {
+	status = "okay";
+
+	axp803: pmic@3a3 {
+		compatible = "x-powers,axp803";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp803.dtsi"
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pl";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dc1sw {
+	regulator-name = "vcc-phy";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1040000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-cpux";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+/*
+ * The DRAM chips used by Pine64 boards are DDR3L-compatible, so they can
+ * work at 1.35V with less power consumption.
+ * As AXP803 DCDC5 cannot reach 1.35V accurately, use 1.36V instead.
+ */
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1360000>;
+	regulator-max-microvolt = <1360000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-hdmi";
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-mipi";
+};
+
+&reg_dldo4 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_eldo1 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "cpvdd";
+};
+
+&reg_fldo1 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-1v2-hsic";
+};
+
+/*
+ * The A64 chip cannot work without this regulator off, although
+ * it seems to be only driving the AR100 core.
+ * Maybe we don't still know well about CPUs domain.
+ */
+&reg_fldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
 /* On Exp and Euler connectors */
 &uart0 {
 	pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
index d891a1a27f6c..17ccc12b58df 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
@@ -95,6 +95,28 @@
 	status = "okay";
 };
 
+&reg_dc1sw {
+	regulator-name = "vcc-phy";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-hdmi";
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-mipi";
+};
+
+&reg_dldo4 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins_a>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
index 475518b031dd..a5da18a6f286 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
@@ -63,3 +63,89 @@
 	bus-width = <4>;
 	status = "okay";
 };
+
+&r_rsb {
+	status = "okay";
+
+	axp803: pmic@3a3 {
+		compatible = "x-powers,axp803";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp803.dtsi"
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pl";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1040000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-cpux";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_eldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vdd-1v8-lpddr";
+};
+
+&reg_fldo1 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-1v2-hsic";
+};
+
+/*
+ * The A64 chip cannot work without this regulator off, although
+ * it seems to be only driving the AR100 core.
+ * Maybe we don't still know well about CPUs domain.
+ */
+&reg_fldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index 68aadc9b96dc..8c8db1b057df 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -467,6 +467,15 @@
 				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		r_intc: interrupt-controller@1f00c00 {
+			compatible = "allwinner,sun50i-a64-r-intc",
+				     "allwinner,sun6i-a31-r-intc";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x01f00c00 0x400>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		r_ccu: clock@1f01400 {
 			compatible = "allwinner,sun50i-a64-r-ccu";
 			reg = <0x01f01400 0x100>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
index dc478d094c11..c89010e56488 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
@@ -121,6 +121,13 @@
 	};
 };
 
+&cec_AO {
+	status = "okay";
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
 &cvbs_vdac_port {
 	cvbs_vdac_out: endpoint {
 		remote-endpoint = <&cvbs_connector_in>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
index 738ed689ff69..f175db846286 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -225,7 +225,7 @@
 			};
 
 			uart_A: serial@84c0 {
-				compatible = "amlogic,meson-uart";
+				compatible = "amlogic,meson-gx-uart", "amlogic,meson-uart";
 				reg = <0x0 0x84c0 0x0 0x14>;
 				interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
 				clocks = <&xtal>;
@@ -233,7 +233,7 @@
 			};
 
 			uart_B: serial@84dc {
-				compatible = "amlogic,meson-uart";
+				compatible = "amlogic,meson-gx-uart", "amlogic,meson-uart";
 				reg = <0x0 0x84dc 0x0 0x14>;
 				interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
 				clocks = <&xtal>;
@@ -279,7 +279,7 @@
 			};
 
 			uart_C: serial@8700 {
-				compatible = "amlogic,meson-uart";
+				compatible = "amlogic,meson-gx-uart", "amlogic,meson-uart";
 				reg = <0x0 0x8700 0x0 0x14>;
 				interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
 				clocks = <&xtal>;
@@ -367,26 +367,40 @@
 			#size-cells = <2>;
 			ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>;
 
-			clkc_AO: clock-controller@040 {
-				compatible = "amlogic,gx-aoclkc", "amlogic,gxbb-aoclkc";
-				reg = <0x0 0x00040 0x0 0x4>;
-				#clock-cells = <1>;
-				#reset-cells = <1>;
+			sysctrl_AO: sys-ctrl@0 {
+				compatible = "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd";
+				reg =  <0x0 0x0 0x0 0x100>;
+
+				clkc_AO: clock-controller {
+					compatible = "amlogic,meson-gx-aoclkc";
+					#clock-cells = <1>;
+					#reset-cells = <1>;
+				};
+			};
+
+			cec_AO: cec@100 {
+				compatible = "amlogic,meson-gx-ao-cec";
+				reg = <0x0 0x00100 0x0 0x14>;
+				interrupts = <GIC_SPI 199 IRQ_TYPE_EDGE_RISING>;
+			};
+
+			sec_AO: ao-secure@140 {
+				compatible = "amlogic,meson-gx-ao-secure", "syscon";
+				reg = <0x0 0x140 0x0 0x140>;
+				amlogic,has-chip-id;
 			};
 
 			uart_AO: serial@4c0 {
-				compatible = "amlogic,meson-uart";
+				compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart", "amlogic,meson-uart";
 				reg = <0x0 0x004c0 0x0 0x14>;
 				interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
-				clocks = <&xtal>;
 				status = "disabled";
 			};
 
 			uart_AO_B: serial@4e0 {
-				compatible = "amlogic,meson-uart";
+				compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart", "amlogic,meson-uart";
 				reg = <0x0 0x004e0 0x0 0x14>;
 				interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
-				clocks = <&xtal>;
 				status = "disabled";
 			};
 
@@ -437,9 +451,9 @@
 			mailbox: mailbox@404 {
 				compatible = "amlogic,meson-gx-mhu", "amlogic,meson-gxbb-mhu";
 				reg = <0 0x404 0 0x4c>;
-				interrupts = <0 208 IRQ_TYPE_EDGE_RISING>,
-					     <0 209 IRQ_TYPE_EDGE_RISING>,
-					     <0 210 IRQ_TYPE_EDGE_RISING>;
+				interrupts = <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>,
+					     <GIC_SPI 209 IRQ_TYPE_EDGE_RISING>,
+					     <GIC_SPI 210 IRQ_TYPE_EDGE_RISING>;
 				#mbox-cells = <1>;
 			};
 		};
@@ -448,7 +462,7 @@
 			compatible = "amlogic,meson-gx-dwmac", "amlogic,meson-gxbb-dwmac", "snps,dwmac";
 			reg = <0x0 0xc9410000 0x0 0x10000
 			       0x0 0xc8834540 0x0 0x4>;
-			interrupts = <0 8 1>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_EDGE_RISING>;
 			interrupt-names = "macirq";
 			status = "disabled";
 		};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
index fa462831ccaf..9697a7a79464 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
@@ -175,6 +175,64 @@
 	pinctrl-names = "default";
 };
 
+&pinctrl_aobus {
+	gpio-line-names = "UART TX", "UART RX", "Power Control", "Power Key In",
+			  "VCCK En", "CON1 Header Pin31",
+			  "I2S Header Pin6", "IR In", "I2S Header Pin7",
+			  "I2S Header Pin3", "I2S Header Pin4",
+			  "I2S Header Pin5", "HDMI CEC", "SYS LED";
+};
+
+&pinctrl_periphs {
+	gpio-line-names = /* Bank GPIOZ */
+			  "Eth MDIO", "Eth MDC", "Eth RGMII RX Clk",
+			  "Eth RX DV", "Eth RX D0", "Eth RX D1", "Eth RX D2",
+			  "Eth RX D3", "Eth RGMII TX Clk", "Eth TX En",
+			  "Eth TX D0", "Eth TX D1", "Eth TX D2", "Eth TX D3",
+			  "Eth PHY nRESET", "Eth PHY Intc",
+			  /* Bank GPIOH */
+			  "HDMI HPD", "HDMI DDC SDA", "HDMI DDC SCL",
+			  "CON1 Header Pin33",
+			  /* Bank BOOT */
+			  "eMMC D0", "eMMC D1", "eMMC D2", "eMMC D3", "eMMC D4",
+			  "eMMC D5", "eMMC D6", "eMMC D7", "eMMC Clk",
+			  "eMMC Reset", "eMMC CMD",
+			  "", "", "", "", "eMMC DS",
+			  "", "",
+			  /* Bank CARD */
+			  "SDCard D1", "SDCard D0", "SDCard CLK", "SDCard CMD",
+			  "SDCard D3", "SDCard D2", "SDCard Det",
+			  /* Bank GPIODV */
+			  "", "", "", "", "", "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "", "", "", "",
+			  "I2C A SDA", "I2C A SCK", "I2C B SDA", "I2C B SCK",
+			  "VDDEE Regulator", "VCCK Regulator",
+			  /* Bank GPIOY */
+			  "CON1 Header Pin7", "CON1 Header Pin11",
+			  "CON1 Header Pin13", "CON1 Header Pin15",
+			  "CON1 Header Pin18", "CON1 Header Pin19",
+			  "CON1 Header Pin22", "CON1 Header Pin21",
+			  "CON1 Header Pin24", "CON1 Header Pin23",
+			  "CON1 Header Pin26", "CON1 Header Pin29",
+			  "CON1 Header Pin32", "CON1 Header Pin8",
+			  "CON1 Header Pin10", "CON1 Header Pin16",
+			  "CON1 Header Pin12",
+			  /* Bank GPIOX */
+			  "WIFI SDIO D0", "WIFI SDIO D1", "WIFI SDIO D2",
+			  "WIFI SDIO D3", "WIFI SDIO CLK", "WIFI SDIO CMD",
+			  "WIFI Power Enable", "WIFI WAKE HOST",
+			  "Bluetooth PCM DOUT", "Bluetooth PCM DIN",
+			  "Bluetooth PCM SYNC", "Bluetooth PCM CLK",
+			  "Bluetooth UART TX", "Bluetooth UART RX",
+			  "Bluetooth UART CTS", "Bluetooth UART RTS",
+			  "", "", "", "WIFI 32K", "Bluetooth Enable",
+			  "Bluetooth WAKE HOST",
+			  /* Bank GPIOCLK */
+			  "", "CON1 Header Pin35", "", "",
+			  /* GPIO_TEST_N */
+			  "";
+};
+
 &pwm_ef {
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
index a1078b3e1c76..9c59c3c6d1b6 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
@@ -171,6 +171,13 @@
 	};
 };
 
+&cec_AO {
+	status = "okay";
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
 &ethmac {
 	status = "okay";
 	pinctrl-0 = <&eth_rmii_pins>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
index d904deb1018c..81ffc689a5bf 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
@@ -84,6 +84,9 @@
 		/* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */
 		states = <1800000 0
 			  3300000 1>;
+
+		regulator-settling-time-up-us = <10000>;
+		regulator-settling-time-down-us = <150000>;
 	};
 
 	vddio_boot: regulator-vddio_boot {
@@ -148,6 +151,13 @@
 	};
 };
 
+&cec_AO {
+	status = "okay";
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
 &cvbs_vdac_port {
 	cvbs_vdac_out: endpoint {
 		remote-endpoint = <&cvbs_connector_in>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts
index e76ac313fef9..f7144fd5e03f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts
@@ -108,6 +108,12 @@
 	};
 };
 
+&cec_AO {
+	status = "okay";
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
 
 &cvbs_vdac_port {
 	cvbs_vdac_out: endpoint {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index 17d3efdf1469..52f1687e7a09 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -307,6 +307,15 @@
 	};
 };
 
+&cec_AO {
+	clocks = <&clkc_AO CLKID_AO_CEC_32K>;
+	clock-names = "core";
+};
+
+&clkc_AO {
+	compatible = "amlogic,meson-gxbb-aoclkc", "amlogic,meson-gx-aoclkc";
+};
+
 &ethmac {
 	clocks = <&clkc CLKID_ETH>,
 		 <&clkc CLKID_FCLK_DIV2>,
@@ -682,6 +691,31 @@
 	clocks = <&clkc CLKID_SPI>;
 };
 
+&uart_A {
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_AO {
+	clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_AO_B {
+	clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_B {
+	clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>;
+	clock-names = "xtal", "core", "baud";
+};
+
+&uart_C {
+	clocks = <&xtal>, <&clkc CLKID_UART2>, <&xtal>;
+	clock-names = "xtal", "core", "baud";
+};
+
 &vpu {
 	compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu";
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts
index 3e0c023d6abd..6827f235d7cf 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts
@@ -97,6 +97,13 @@
 	};
 };
 
+&cec_AO {
+	status = "okay";
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
 /* P230 has exclusive choice between internal or external PHY */
 &ethmac {
 	pinctrl-0 = <&eth_pins>;
@@ -124,7 +131,6 @@
 	};
 };
 
-
 &hdmi_tx {
 	status = "okay";
 	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
index 94567eb17875..edc512ad0bac 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
@@ -67,6 +67,13 @@
 	};
 };
 
+&cec_AO {
+	status = "okay";
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
 &hdmi_tx {
 	status = "okay";
 	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
@@ -105,6 +112,62 @@
 	linux,rc-map-name = "rc-geekbox";
 };
 
+&pinctrl_aobus {
+	gpio-line-names = "UART TX",
+			  "UART RX",
+			  "Power Key In",
+			  "J9 Header Pin35",
+			  "J9 Header Pin16",
+			  "J9 Header Pin15",
+			  "J9 Header Pin33",
+			  "IR In",
+			  "HDMI CEC",
+			  "SYS LED";
+};
+
+&pinctrl_periphs {
+	gpio-line-names = /* Bank GPIOZ */
+			  "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "",
+			  "Power OFF",
+			  "VCCK Enable",
+			  /* Bank GPIOH */
+			  "HDMI HPD", "HDMI SDA", "HDMI SCL",
+			  "HDMI_5V_EN", "SPDIF",
+			  "J9 Header Pin37",
+			  "J9 Header Pin30",
+			  "J9 Header Pin29",
+			  "J9 Header Pin32",
+			  "J9 Header Pin31",
+			  /* Bank BOOT */
+			  "eMMC D0", "eMMC D1", "eMMC D2", "eMMC D3",
+			  "eMMC D4", "eMMC D5", "eMMC D6", "eMMC D7",
+			  "eMMC Clk", "eMMC Reset", "eMMC CMD",
+			  "", "BOOT_MODE", "", "", "eMMC Data Strobe",
+			  /* Bank CARD */
+			  "SDCard D1", "SDCard D0", "SDCard CLK", "SDCard CMD",
+			  "SDCard D3", "SDCard D2", "SDCard Det",
+			  /* Bank GPIODV */
+			  "", "", "", "", "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "", "", "", "", "",
+			  "I2C A SDA", "I2C A SCK", "I2C B SDA", "I2C B SCK",
+			  "VCCK Regulator", "VDDEE Regulator",
+			  /* Bank GPIOX */
+			  "WIFI SDIO D0", "WIFI SDIO D1", "WIFI SDIO D2",
+			  "WIFI SDIO D3", "WIFI SDIO CLK", "WIFI SDIO CMD",
+			  "WIFI Power Enable", "WIFI WAKE HOST",
+			  "Bluetooth PCM DOUT", "Bluetooth PCM DIN",
+			  "Bluetooth PCM SYNC", "Bluetooth PCM CLK",
+			  "Bluetooth UART TX", "Bluetooth UART RX",
+			  "Bluetooth UART CTS", "Bluetooth UART RTS",
+			  "WIFI 32K", "Bluetooth Enable",
+			  "Bluetooth WAKE HOST",
+			  /* Bank GPIOCLK */
+			  "", "J9 Header Pin39",
+			  /* GPIO_TEST_N */
+			  "";
+};
+
 &pwm_AO_ab {
 	status = "okay";
 	pinctrl-0 = <&pwm_ao_a_3_pins>, <&pwm_ao_b_pins>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
index 266fbcf3e47f..69ca14ac10fa 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
@@ -101,6 +101,13 @@
 	};
 };
 
+&cec_AO {
+	status = "okay";
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
 &cvbs_vdac_port {
 	cvbs_vdac_out: endpoint {
 		remote-endpoint = <&cvbs_connector_in>;
@@ -129,6 +136,63 @@
 	};
 };
 
+&pinctrl_aobus {
+	gpio-line-names = "UART TX",
+			  "UART RX",
+			  "Blue LED",
+			  "SDCard Voltage Switch",
+			  "7J1 Header Pin5",
+			  "7J1 Header Pin3",
+			  "7J1 Header Pin12",
+			  "IR In",
+			  "9J3 Switch HDMI CEC/7J1 Header Pin11",
+			  "7J1 Header Pin13";
+};
+
+&pinctrl_periphs {
+	gpio-line-names = /* Bank GPIOZ */
+			  "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "",
+			  "Eth Link LED", "Eth Activity LED",
+			  /* Bank GPIOH */
+			  "HDMI HPD", "HDMI SDA", "HDMI SCL",
+			  "HDMI_5V_EN", "9J1 Header Pin2",
+			  "Analog Audio Mute",
+			  "2J3 Header Pin6",
+			  "2J3 Header Pin5",
+			  "2J3 Header Pin4",
+			  "2J3 Header Pin3",
+			  /* Bank BOOT */
+			  "eMMC D0", "eMMC D1", "eMMC D2", "eMMC D3",
+			  "eMMC D4", "eMMC D5", "eMMC D6", "eMMC D7",
+			  "eMMC Clk", "eMMC Reset", "eMMC CMD",
+			  "ALT BOOT MODE", "", "", "", "eMMC Data Strobe",
+			  /* Bank CARD */
+			  "SDCard D1", "SDCard D0", "SDCard CLK", "SDCard CMD",
+			  "SDCard D3", "SDCard D2", "SDCard Det",
+			  /* Bank GPIODV */
+			  "", "", "", "", "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "", "", "", "", "",
+			  "Green LED", "VCCK Enable",
+			  "7J1 Header Pin27", "7J1 Header Pin28",
+			  "VCCK Regulator", "VDDEE Regulator",
+			  /* Bank GPIOX */
+			  "7J1 Header Pin22", "7J1 Header Pin26",
+			  "7J1 Header Pin36", "7J1 Header Pin38",
+			  "7J1 Header Pin40", "7J1 Header Pin37",
+			  "7J1 Header Pin33", "7J1 Header Pin35",
+			  "7J1 Header Pin19", "7J1 Header Pin21",
+			  "7J1 Header Pin24", "7J1 Header Pin23",
+			  "7J1 Header Pin8", "7J1 Header Pin10",
+			  "7J1 Header Pin16", "7J1 Header Pin18",
+			  "7J1 Header Pin32", "7J1 Header Pin29",
+			  "7J1 Header Pin31",
+			  /* Bank GPIOCLK */
+			  "7J1 Header Pin7", "",
+			  /* GPIO_TEST_N */
+			  "7J1 Header Pin15";
+};
+
 /* SD card */
 &sd_emmc_b {
 	status = "okay";
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts
index 6633a5d8fdd3..4c2ac7650fcd 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts
@@ -140,6 +140,13 @@
 	};
 };
 
+&cec_AO {
+	status = "okay";
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
 &cvbs_vdac_port {
 	cvbs_vdac_out: endpoint {
 		remote-endpoint = <&cvbs_connector_in>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
index 6ab17c1eeefd..6e2bf858291c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
@@ -71,6 +71,13 @@
 	};
 };
 
+&cec_AO {
+	status = "okay";
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
 &cvbs_vdac_port {
 	cvbs_vdac_out: endpoint {
 		remote-endpoint = <&cvbs_connector_in>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index 8d4f3160a0ee..d6876e64979e 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -43,6 +43,7 @@
 
 #include "meson-gx.dtsi"
 #include <dt-bindings/clock/gxbb-clkc.h>
+#include <dt-bindings/clock/gxbb-aoclkc.h>
 #include <dt-bindings/gpio/meson-gxl-gpio.h>
 #include <dt-bindings/reset/amlogic,meson-gxbb-reset.h>
 
@@ -207,6 +208,15 @@
 	};
 };
 
+&cec_AO {
+	clocks = <&clkc_AO CLKID_AO_CEC_32K>;
+	clock-names = "core";
+};
+
+&clkc_AO {
+	compatible = "amlogic,meson-gxl-aoclkc", "amlogic,meson-gx-aoclkc";
+};
+
 &hdmi_tx {
 	compatible = "amlogic,meson-gxl-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
 	resets = <&reset RESET_HDMITX_CAPB3>,
@@ -623,6 +633,31 @@
 	clocks = <&clkc CLKID_SPI>;
 };
 
+&uart_A {
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>;
+	clock-names = "xtal", "core", "baud";
+};
+
+&uart_AO {
+	clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_AO_B {
+	clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_B {
+	clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>;
+	clock-names = "xtal", "core", "baud";
+};
+
+&uart_C {
+	clocks = <&xtal>, <&clkc CLKID_UART2>, <&xtal>;
+	clock-names = "xtal", "core", "baud";
+};
+
 &vpu {
 	compatible = "amlogic,meson-gxl-vpu", "amlogic,meson-gx-vpu";
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
index 5f626d683088..9b10c5f4f8c0 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
@@ -113,6 +113,13 @@
 	};
 };
 
+&cec_AO {
+	status = "okay";
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
 &cvbs_vdac_port {
 	cvbs_vdac_out: endpoint {
 		remote-endpoint = <&cvbs_connector_in>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
index fe451cce93e7..19a798d2ae2f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
@@ -117,6 +117,10 @@
 	};
 };
 
+&clkc_AO {
+	compatible = "amlogic,meson-gxm-aoclkc", "amlogic,meson-gx-aoclkc";
+};
+
 &saradc {
 	compatible = "amlogic,meson-gxm-saradc", "amlogic,meson-saradc";
 };
diff --git a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
index 72720e9132a1..c9ffffb96e43 100644
--- a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
+++ b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
@@ -626,6 +626,7 @@
 				  0x43000000 0xe0 0x00000000 0xe0 0x00000000 0x20 0x00000000>; /* mem */
 			dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
 				      0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
+			bus-range = <0x00 0xff>;
 			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
 			interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0x0 0x0 0x10 0x4
 					 0x0 0x0 0x0 0x2 &gic 0x0 0x0 0x0 0x11 0x4
@@ -651,6 +652,7 @@
 				  0x43000000 0xb0 0x00000000 0xb0 0x00000000 0x10 0x00000000>; /* mem */
 			dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
 				      0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
+			bus-range = <0x00 0xff>;
 			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
 			interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0x0 0x0 0x16 0x4
 					 0x0 0x0 0x0 0x2 &gic 0x0 0x0 0x0 0x17 0x4
diff --git a/arch/arm64/boot/dts/apm/apm-storm.dtsi b/arch/arm64/boot/dts/apm/apm-storm.dtsi
index 63be8e51eaa8..c09a36fed917 100644
--- a/arch/arm64/boot/dts/apm/apm-storm.dtsi
+++ b/arch/arm64/boot/dts/apm/apm-storm.dtsi
@@ -626,6 +626,7 @@
 				  0x43000000 0xf0 0x00000000 0xf0 0x00000000 0x10 0x00000000>; /* mem */
 			dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
 				      0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
+			bus-range = <0x00 0xff>;
 			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
 			interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc2 0x4
 					 0x0 0x0 0x0 0x2 &gic 0x0 0xc3 0x4
@@ -651,6 +652,7 @@
 				  0x43000000 0xd8 0x00000000 0xd8 0x00000000 0x08 0x00000000>; /* mem */
 			dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
 				      0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
+			bus-range = <0x00 0xff>;
 			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
 			interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc8 0x4
 					 0x0 0x0 0x0 0x2 &gic 0x0 0xc9 0x4
@@ -676,6 +678,7 @@
 				  0x43000000 0x94 0x00000000 0x94 0x00000000 0x04 0x00000000>; /* mem */
 			dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
 				      0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
+			bus-range = <0x00 0xff>;
 			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
 			interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xce 0x4
 					 0x0 0x0 0x0 0x2 &gic 0x0 0xcf 0x4
@@ -701,6 +704,7 @@
 				  0x43000000 0xb0 0x00000000 0xb0 0x00000000 0x10 0x00000000>; /* mem */
 			dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
 				      0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
+			bus-range = <0x00 0xff>;
 			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
 			interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xd4 0x4
 					 0x0 0x0 0x0 0x2 &gic 0x0 0xd5 0x4
@@ -726,6 +730,7 @@
 				  0x43000000 0xc8 0x00000000 0xc8 0x00000000 0x08 0x00000000>; /* mem */
 			dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
 				      0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
+			bus-range = <0x00 0xff>;
 			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
 			interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xda 0x4
 					 0x0 0x0 0x0 0x2 &gic 0x0 0xdb 0x4
diff --git a/arch/arm64/boot/dts/arm/foundation-v8.dtsi b/arch/arm64/boot/dts/arm/foundation-v8.dtsi
index 7cfa8e414e7f..8ecdd4331980 100644
--- a/arch/arm64/boot/dts/arm/foundation-v8.dtsi
+++ b/arch/arm64/boot/dts/arm/foundation-v8.dtsi
@@ -226,7 +226,7 @@
 				clock-names = "uartclk", "apb_pclk";
 			};
 
-			virtio_block@0130000 {
+			virtio-block@0130000 {
 				compatible = "virtio,mmio";
 				reg = <0x130000 0x200>;
 				interrupts = <42>;
diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi
index e8b7413ec890..fbafe62d6b22 100644
--- a/arch/arm64/boot/dts/arm/juno-base.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-base.dtsi
@@ -201,7 +201,7 @@
 		};
 	};
 
-	cpu_debug0: cpu_debug@22010000 {
+	cpu_debug0: cpu-debug@22010000 {
 		compatible = "arm,coresight-cpu-debug", "arm,primecell";
 		reg = <0x0 0x22010000 0x0 0x1000>;
 
@@ -260,7 +260,7 @@
 		};
 	};
 
-	cpu_debug1: cpu_debug@22110000 {
+	cpu_debug1: cpu-debug@22110000 {
 		compatible = "arm,coresight-cpu-debug", "arm,primecell";
 		reg = <0x0 0x22110000 0x0 0x1000>;
 
@@ -283,7 +283,7 @@
 		};
 	};
 
-	cpu_debug2: cpu_debug@23010000 {
+	cpu_debug2: cpu-debug@23010000 {
 		compatible = "arm,coresight-cpu-debug", "arm,primecell";
 		reg = <0x0 0x23010000 0x0 0x1000>;
 
@@ -356,7 +356,7 @@
 		};
 	};
 
-	cpu_debug3: cpu_debug@23110000 {
+	cpu_debug3: cpu-debug@23110000 {
 		compatible = "arm,coresight-cpu-debug", "arm,primecell";
 		reg = <0x0 0x23110000 0x0 0x1000>;
 
@@ -379,7 +379,7 @@
 		};
 	};
 
-	cpu_debug4: cpu_debug@23210000 {
+	cpu_debug4: cpu-debug@23210000 {
 		compatible = "arm,coresight-cpu-debug", "arm,primecell";
 		reg = <0x0 0x23210000 0x0 0x1000>;
 
@@ -402,7 +402,7 @@
 		};
 	};
 
-	cpu_debug5: cpu_debug@23310000 {
+	cpu_debug5: cpu-debug@23310000 {
 		compatible = "arm,coresight-cpu-debug", "arm,primecell";
 		reg = <0x0 0x23310000 0x0 0x1000>;
 
@@ -426,7 +426,7 @@
 	};
 
 	replicator@20120000 {
-		compatible = "qcom,coresight-replicator1x", "arm,primecell";
+		compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
 		reg = <0 0x20120000 0 0x1000>;
 
 		clocks = <&soc_smc50mhz>;
diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi
index 161ac98418a3..528875c75598 100644
--- a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi
+++ b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi
@@ -219,7 +219,7 @@
 				};
 			};
 
-			virtio_block@0130000 {
+			virtio-block@0130000 {
 				compatible = "virtio,mmio";
 				reg = <0x130000 0x200>;
 				interrupts = <42>;
diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile
index f11bdd6689ea..3eaef3895d66 100644
--- a/arch/arm64/boot/dts/broadcom/Makefile
+++ b/arch/arm64/boot/dts/broadcom/Makefile
@@ -1,7 +1,7 @@
 dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rpi-3-b.dtb
-dtb-$(CONFIG_ARCH_BCM_IPROC) += ns2-svk.dtb ns2-xmc.dtb
 
-dts-dirs	:= stingray
+dts-dirs	+= northstar2
+dts-dirs	+= stingray
 always		:= $(dtb-y)
 subdir-y	:= $(dts-dirs)
 clean-files	:= *.dtb
diff --git a/arch/arm64/boot/dts/broadcom/bcm2835-rpi.dtsi b/arch/arm64/boot/dts/broadcom/bcm2835-rpi.dtsi
deleted file mode 120000
index 3937b77cb310..000000000000
--- a/arch/arm64/boot/dts/broadcom/bcm2835-rpi.dtsi
+++ /dev/null
@@ -1 +0,0 @@
-../../../../arm/boot/dts/bcm2835-rpi.dtsi
-\ No newline at end of file
diff --git a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts
index 972f14db28ac..699d340a3437 100644
--- a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts
@@ -1,41 +1 @@
-/dts-v1/;
-#include "bcm2837.dtsi"
-#include "bcm2835-rpi.dtsi"
-#include "bcm283x-rpi-smsc9514.dtsi"
-#include "bcm283x-rpi-usb-host.dtsi"
-
-/ {
-	compatible = "raspberrypi,3-model-b", "brcm,bcm2837";
-	model = "Raspberry Pi 3 Model B";
-
-	memory {
-		reg = <0 0x40000000>;
-	};
-
-	leds {
-		act {
-			gpios = <&gpio 47 0>;
-		};
-	};
-};
-
-&uart1 {
-	status = "okay";
-};
-
-/* SDHCI is used to control the SDIO for wireless */
-&sdhci {
-	pinctrl-names = "default";
-	pinctrl-0 = <&emmc_gpio34>;
-	status = "okay";
-	bus-width = <4>;
-	non-removable;
-};
-
-/* SDHOST is used to drive the SD card */
-&sdhost {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdhost_gpio48>;
-	status = "okay";
-	bus-width = <4>;
-};
+#include "arm/bcm2837-rpi-3-b.dts"
diff --git a/arch/arm64/boot/dts/broadcom/bcm2837.dtsi b/arch/arm64/boot/dts/broadcom/bcm2837.dtsi
deleted file mode 100644
index 2d5de6f0f78d..000000000000
--- a/arch/arm64/boot/dts/broadcom/bcm2837.dtsi
+++ /dev/null
@@ -1,86 +0,0 @@
-#include "bcm283x.dtsi"
-
-/ {
-	compatible = "brcm,bcm2837";
-
-	soc {
-		ranges = <0x7e000000 0x3f000000 0x1000000>,
-			 <0x40000000 0x40000000 0x00001000>;
-		dma-ranges = <0xc0000000 0x00000000 0x3f000000>;
-
-		local_intc: local_intc {
-			compatible = "brcm,bcm2836-l1-intc";
-			reg = <0x40000000 0x100>;
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			interrupt-parent = <&local_intc>;
-		};
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupt-parent = <&local_intc>;
-		interrupts = <0>, // PHYS_SECURE_PPI
-			     <1>, // PHYS_NONSECURE_PPI
-			     <3>, // VIRT_PPI
-			     <2>; // HYP_PPI
-		always-on;
-	};
-
-	cpus: cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0x0 0x000000d8>;
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <1>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0x0 0x000000e0>;
-		};
-
-		cpu2: cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <2>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0x0 0x000000e8>;
-		};
-
-		cpu3: cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <3>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0x0 0x000000f0>;
-		};
-	};
-};
-
-/* Make the BCM2835-style global interrupt controller be a child of the
- * CPU-local interrupt controller.
- */
-&intc {
-	compatible = "brcm,bcm2836-armctrl-ic";
-	reg = <0x7e00b200 0x200>;
-	interrupt-parent = <&local_intc>;
-	interrupts = <8>;
-};
-
-&cpu_thermal {
-	coefficients = <(-538)	412000>;
-};
-
-/* enable thermal sensor with the correct compatible property set */
-&thermal {
-	compatible = "brcm,bcm2837-thermal";
-	status = "okay";
-};
diff --git a/arch/arm64/boot/dts/broadcom/bcm283x-rpi-smsc9514.dtsi b/arch/arm64/boot/dts/broadcom/bcm283x-rpi-smsc9514.dtsi
deleted file mode 120000
index dca7c057d5a5..000000000000
--- a/arch/arm64/boot/dts/broadcom/bcm283x-rpi-smsc9514.dtsi
+++ /dev/null
@@ -1 +0,0 @@
-../../../../arm/boot/dts/bcm283x-rpi-smsc9514.dtsi
-\ No newline at end of file
diff --git a/arch/arm64/boot/dts/broadcom/bcm283x-rpi-usb-host.dtsi b/arch/arm64/boot/dts/broadcom/bcm283x-rpi-usb-host.dtsi
deleted file mode 120000
index cbeebe312ff8..000000000000
--- a/arch/arm64/boot/dts/broadcom/bcm283x-rpi-usb-host.dtsi
+++ /dev/null
@@ -1 +0,0 @@
-../../../../arm/boot/dts/bcm283x-rpi-usb-host.dtsi
-\ No newline at end of file
diff --git a/arch/arm64/boot/dts/broadcom/bcm283x.dtsi b/arch/arm64/boot/dts/broadcom/bcm283x.dtsi
deleted file mode 120000
index 5f54e4cab99b..000000000000
--- a/arch/arm64/boot/dts/broadcom/bcm283x.dtsi
+++ /dev/null
@@ -1 +0,0 @@
-../../../../arm/boot/dts/bcm283x.dtsi
-\ No newline at end of file
diff --git a/arch/arm64/boot/dts/broadcom/northstar2/Makefile b/arch/arm64/boot/dts/broadcom/northstar2/Makefile
new file mode 100644
index 000000000000..e01a1485b813
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/northstar2/Makefile
@@ -0,0 +1,6 @@
+dtb-$(CONFIG_ARCH_BCM_IPROC) += ns2-svk.dtb
+dtb-$(CONFIG_ARCH_BCM_IPROC) += ns2-xmc.dtb
+
+always		:= $(dtb-y)
+subdir-y	:= $(dts-dirs)
+clean-files	:= *.dtb
diff --git a/arch/arm64/boot/dts/broadcom/ns2-clock.dtsi b/arch/arm64/boot/dts/broadcom/northstar2/ns2-clock.dtsi
index 99009fdf10a4..99009fdf10a4 100644
--- a/arch/arm64/boot/dts/broadcom/ns2-clock.dtsi
+++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2-clock.dtsi
diff --git a/arch/arm64/boot/dts/broadcom/ns2-svk.dts b/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts
index ec19fbf928a1..ec19fbf928a1 100644
--- a/arch/arm64/boot/dts/broadcom/ns2-svk.dts
+++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts
diff --git a/arch/arm64/boot/dts/broadcom/ns2-xmc.dts b/arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts
index ab4ae1a32fab..ab4ae1a32fab 100644
--- a/arch/arm64/boot/dts/broadcom/ns2-xmc.dts
+++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts
diff --git a/arch/arm64/boot/dts/broadcom/ns2.dtsi b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
index 35c8457e3d1f..35c8457e3d1f 100644
--- a/arch/arm64/boot/dts/broadcom/ns2.dtsi
+++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi
index 5dca7d10253b..8862ec907fd8 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi
@@ -72,6 +72,78 @@
 	      <0x00000008 0x80000000 0x1 0x80000000>; /* 6G @ 34G */
 };
 
+&sata0 {
+	status = "okay";
+};
+
+&sata_phy0{
+	status = "okay";
+};
+
+&sata1 {
+	status = "okay";
+};
+
+&sata_phy1{
+	status = "okay";
+};
+
+&sata2 {
+	status = "okay";
+};
+
+&sata_phy2{
+	status = "okay";
+};
+
+&sata3 {
+	status = "okay";
+};
+
+&sata_phy3{
+	status = "okay";
+};
+
+&sata4 {
+	status = "okay";
+};
+
+&sata_phy4{
+	status = "okay";
+};
+
+&sata5 {
+	status = "okay";
+};
+
+&sata_phy5{
+	status = "okay";
+};
+
+&sata6 {
+	status = "okay";
+};
+
+&sata_phy6{
+	status = "okay";
+};
+
+&sata7 {
+	status = "okay";
+};
+
+&sata_phy7{
+	status = "okay";
+};
+
+&mdio_mux_iproc {
+	mdio@10 {
+		gphy0: eth-phy@10 {
+			reg = <0x10>;
+		};
+	};
+};
+
 &uart1 {
 	status = "okay";
 };
@@ -102,6 +174,12 @@
 	};
 };
 
+&enet {
+	phy-mode = "rgmii-id";
+	phy-handle = <&gphy0>;
+	status = "okay";
+};
+
 &nand {
 	status = "ok";
 	nandcs@0 {
diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts b/arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts
index 5671669ba348..eb6f08cdbd79 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts
+++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts
@@ -39,6 +39,10 @@
 	model = "Stingray Combo SVK (BCM958742K)";
 };
 
+&gphy0 {
+	enet-phy-lane-swap;
+};
+
 &uart2 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958742t.dts b/arch/arm64/boot/dts/broadcom/stingray/bcm958742t.dts
index 6ebe399fda6a..5084b037320f 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/bcm958742t.dts
+++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958742t.dts
@@ -38,3 +38,7 @@
 	compatible = "brcm,bcm958742t", "brcm,stingray";
 	model = "Stingray SST100 (BCM958742T)";
 };
+
+&gphy0 {
+	enet-phy-lane-swap;
+};
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-fs4.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-fs4.dtsi
new file mode 100644
index 000000000000..8bf1dc6b46ca
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-fs4.dtsi
@@ -0,0 +1,118 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016-2017 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+	fs4: fs4 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x67000000 0x00800000>;
+
+		crypto_mbox: crypto_mbox@00000000 {
+			compatible = "brcm,iproc-flexrm-mbox";
+			reg = <0x00000000 0x200000>;
+			msi-parent = <&gic_its 0x4100>;
+			#mbox-cells = <3>;
+			dma-coherent;
+		};
+
+		raid_mbox: raid_mbox@00400000 {
+			compatible = "brcm,iproc-flexrm-mbox";
+			reg = <0x00400000 0x200000>;
+			dma-coherent;
+			msi-parent = <&gic_its 0x4300>;
+			#mbox-cells = <3>;
+		};
+
+		raid0: raid@0 {
+			compatible = "brcm,iproc-sba-v2";
+			mboxes = <&raid_mbox 0 0x1 0xff00>,
+				 <&raid_mbox 1 0x1 0xff00>,
+				 <&raid_mbox 2 0x1 0xff00>,
+				 <&raid_mbox 3 0x1 0xff00>;
+		};
+
+		raid1: raid@1 {
+			compatible = "brcm,iproc-sba-v2";
+			mboxes = <&raid_mbox 4 0x1 0xff00>,
+				 <&raid_mbox 5 0x1 0xff00>,
+				 <&raid_mbox 6 0x1 0xff00>,
+				 <&raid_mbox 7 0x1 0xff00>;
+		};
+
+		raid2: raid@2 {
+			compatible = "brcm,iproc-sba-v2";
+			mboxes = <&raid_mbox 8 0x1 0xff00>,
+				 <&raid_mbox 9 0x1 0xff00>,
+				 <&raid_mbox 10 0x1 0xff00>,
+				 <&raid_mbox 11 0x1 0xff00>;
+		};
+
+		raid3: raid@3 {
+			compatible = "brcm,iproc-sba-v2";
+			mboxes = <&raid_mbox 12 0x1 0xff00>,
+				 <&raid_mbox 13 0x1 0xff00>,
+				 <&raid_mbox 14 0x1 0xff00>,
+				 <&raid_mbox 15 0x1 0xff00>;
+		};
+
+		raid4: raid@4 {
+			compatible = "brcm,iproc-sba-v2";
+			mboxes = <&raid_mbox 16 0x1 0xff00>,
+				 <&raid_mbox 17 0x1 0xff00>,
+				 <&raid_mbox 18 0x1 0xff00>,
+				 <&raid_mbox 19 0x1 0xff00>;
+		};
+
+		raid5: raid@5 {
+			compatible = "brcm,iproc-sba-v2";
+			mboxes = <&raid_mbox 20 0x1 0xff00>,
+				 <&raid_mbox 21 0x1 0xff00>,
+				 <&raid_mbox 22 0x1 0xff00>,
+				 <&raid_mbox 23 0x1 0xff00>;
+		};
+
+		raid6: raid@6 {
+			compatible = "brcm,iproc-sba-v2";
+			mboxes = <&raid_mbox 24 0x1 0xff00>,
+				 <&raid_mbox 25 0x1 0xff00>,
+				 <&raid_mbox 26 0x1 0xff00>,
+				 <&raid_mbox 27 0x1 0xff00>;
+		};
+
+		raid7: raid@7 {
+			compatible = "brcm,iproc-sba-v2";
+			mboxes = <&raid_mbox 28 0x1 0xff00>,
+				 <&raid_mbox 29 0x1 0xff00>,
+				 <&raid_mbox 30 0x1 0xff00>,
+				 <&raid_mbox 31 0x1 0xff00>;
+		};
+	};
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi
new file mode 100644
index 000000000000..a774709388df
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi
@@ -0,0 +1,278 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016-2017 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+	sata {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x67d00000 0x00800000>;
+
+		sata0: ahci@00210000 {
+			compatible = "brcm,iproc-ahci", "generic-ahci";
+			reg = <0x00210000 0x1000>;
+			reg-names = "ahci";
+			interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			sata0_port0: sata-port@0 {
+				reg = <0>;
+				phys = <&sata0_phy0>;
+				phy-names = "sata-phy";
+			};
+		};
+
+		sata_phy0: sata_phy@00212100 {
+			compatible = "brcm,iproc-sr-sata-phy";
+			reg = <0x00212100 0x1000>;
+			reg-names = "phy";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			sata0_phy0: sata-phy@0 {
+				reg = <0>;
+				#phy-cells = <0>;
+			};
+		};
+
+		sata1: ahci@00310000 {
+			compatible = "brcm,iproc-ahci", "generic-ahci";
+			reg = <0x00310000 0x1000>;
+			reg-names = "ahci";
+			interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			sata1_port0: sata-port@0 {
+				reg = <0>;
+				phys = <&sata1_phy0>;
+				phy-names = "sata-phy";
+			};
+		};
+
+		sata_phy1: sata_phy@00312100 {
+			compatible = "brcm,iproc-sr-sata-phy";
+			reg = <0x00312100 0x1000>;
+			reg-names = "phy";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			sata1_phy0: sata-phy@0 {
+				reg = <0>;
+				#phy-cells = <0>;
+			};
+		};
+
+		sata2: ahci@00120000 {
+			compatible = "brcm,iproc-ahci", "generic-ahci";
+			reg = <0x00120000 0x1000>;
+			reg-names = "ahci";
+			interrupts = <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			sata2_port0: sata-port@0 {
+				reg = <0>;
+				phys = <&sata2_phy0>;
+				phy-names = "sata-phy";
+			};
+		};
+
+		sata_phy2: sata_phy@00122100 {
+			compatible = "brcm,iproc-sr-sata-phy";
+			reg = <0x00122100 0x1000>;
+			reg-names = "phy";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			sata2_phy0: sata-phy@0 {
+				reg = <0>;
+				#phy-cells = <0>;
+			};
+		};
+
+		sata3: ahci@00130000 {
+			compatible = "brcm,iproc-ahci", "generic-ahci";
+			reg = <0x00130000 0x1000>;
+			reg-names = "ahci";
+			interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			sata3_port0: sata-port@0 {
+				reg = <0>;
+				phys = <&sata3_phy0>;
+				phy-names = "sata-phy";
+			};
+		};
+
+		sata_phy3: sata_phy@00132100 {
+			compatible = "brcm,iproc-sr-sata-phy";
+			reg = <0x00132100 0x1000>;
+			reg-names = "phy";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			sata3_phy0: sata-phy@0 {
+				reg = <0>;
+				#phy-cells = <0>;
+			};
+		};
+
+		sata4: ahci@00330000 {
+			compatible = "brcm,iproc-ahci", "generic-ahci";
+			reg = <0x00330000 0x1000>;
+			reg-names = "ahci";
+			interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			sata4_port0: sata-port@0 {
+				reg = <0>;
+				phys = <&sata4_phy0>;
+				phy-names = "sata-phy";
+			};
+		};
+
+		sata_phy4: sata_phy@00332100 {
+			compatible = "brcm,iproc-sr-sata-phy";
+			reg = <0x00332100 0x1000>;
+			reg-names = "phy";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			sata4_phy0: sata-phy@0 {
+				reg = <0>;
+				#phy-cells = <0>;
+			};
+		};
+
+		sata5: ahci@00400000 {
+			compatible = "brcm,iproc-ahci", "generic-ahci";
+			reg = <0x00400000 0x1000>;
+			reg-names = "ahci";
+			interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			sata5_port0: sata-port@0 {
+				reg = <0>;
+				phys = <&sata5_phy0>;
+				phy-names = "sata-phy";
+			};
+		};
+
+		sata_phy5: sata_phy@00402100 {
+			compatible = "brcm,iproc-sr-sata-phy";
+			reg = <0x00402100 0x1000>;
+			reg-names = "phy";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			sata5_phy0: sata-phy@0 {
+				reg = <0>;
+				#phy-cells = <0>;
+			};
+		};
+
+		sata6: ahci@00410000 {
+			compatible = "brcm,iproc-ahci", "generic-ahci";
+			reg = <0x00410000 0x1000>;
+			reg-names = "ahci";
+			interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			sata6_port0: sata-port@0 {
+				reg = <0>;
+				phys = <&sata6_phy0>;
+				phy-names = "sata-phy";
+			};
+		};
+
+		sata_phy6: sata_phy@00412100 {
+			compatible = "brcm,iproc-sr-sata-phy";
+			reg = <0x00412100 0x1000>;
+			reg-names = "phy";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			sata6_phy0: sata-phy@0 {
+				reg = <0>;
+				#phy-cells = <0>;
+			};
+		};
+
+		sata7: ahci@00420000 {
+			compatible = "brcm,iproc-ahci", "generic-ahci";
+			reg = <0x00420000 0x1000>;
+			reg-names = "ahci";
+			interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			sata7_port0: sata-port@0 {
+				reg = <0>;
+				phys = <&sata7_phy0>;
+				phy-names = "sata-phy";
+			};
+		};
+
+		sata_phy7: sata_phy@00422100 {
+			compatible = "brcm,iproc-sr-sata-phy";
+			reg = <0x00422100 0x1000>;
+			reg-names = "phy";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			sata7_phy0: sata-phy@0 {
+				reg = <0>;
+				#phy-cells = <0>;
+			};
+		};
+	};
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
index 49933cf16c92..e6f75c633623 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
@@ -152,6 +152,12 @@
 		#size-cells = <1>;
 		ranges = <0x0 0x0 0x61000000 0x05000000>;
 
+		ccn: ccn@00000000 {
+			compatible = "arm,ccn-502";
+			reg = <0x00000000 0x900000>;
+			interrupts = <GIC_SPI 799 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		gic: interrupt-controller@02c00000 {
 			compatible = "arm,gic-v3";
 			#interrupt-cells = <3>;
@@ -261,6 +267,9 @@
 		};
 	};
 
+	#include "stingray-fs4.dtsi"
+	#include "stingray-sata.dtsi"
+
 	hsls {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -269,6 +278,37 @@
 
 		#include "stingray-pinctrl.dtsi"
 
+		mdio_mux_iproc: mdio-mux@0002023c {
+			compatible = "brcm,mdio-mux-iproc";
+			reg = <0x0002023c 0x14>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mdio@0 { /* PCIe serdes */
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			mdio@2 { /* SATA */
+				reg = <0x2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			mdio@3 { /* USB */
+				reg = <0x3>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			mdio@10 { /* RGMII */
+				reg = <0x10>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
 		pwm: pwm@00010000 {
 			compatible = "brcm,iproc-pwm";
 			reg = <0x00010000 0x1000>;
@@ -277,6 +317,93 @@
 			status = "disabled";
 		};
 
+		timer0: timer@00030000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x00030000 0x1000>;
+			interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsls_25m_div2_clk>,
+				 <&hsls_25m_div2_clk>,
+				 <&hsls_div4_clk>;
+			clock-names = "timer1", "timer2", "apb_pclk";
+			status = "disabled";
+		};
+
+		timer1: timer@00040000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x00040000 0x1000>;
+			interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsls_25m_div2_clk>,
+				 <&hsls_25m_div2_clk>,
+				 <&hsls_div4_clk>;
+			clock-names = "timer1", "timer2", "apb_pclk";
+		};
+
+		timer2: timer@00050000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x00050000 0x1000>;
+			interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsls_25m_div2_clk>,
+				 <&hsls_25m_div2_clk>,
+				 <&hsls_div4_clk>;
+			clock-names = "timer1", "timer2", "apb_pclk";
+			status = "disabled";
+		};
+
+		timer3: timer@00060000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x00060000 0x1000>;
+			interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsls_25m_div2_clk>,
+				 <&hsls_25m_div2_clk>,
+				 <&hsls_div4_clk>;
+			clock-names = "timer1", "timer2", "apb_pclk";
+			status = "disabled";
+		};
+
+		timer4: timer@00070000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x00070000 0x1000>;
+			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsls_25m_div2_clk>,
+				 <&hsls_25m_div2_clk>,
+				 <&hsls_div4_clk>;
+			clock-names = "timer1", "timer2", "apb_pclk";
+			status = "disabled";
+		};
+
+		timer5: timer@00080000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x00080000 0x1000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsls_25m_div2_clk>,
+				 <&hsls_25m_div2_clk>,
+				 <&hsls_div4_clk>;
+			clock-names = "timer1", "timer2", "apb_pclk";
+			status = "disabled";
+		};
+
+		timer6: timer@00090000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x00090000 0x1000>;
+			interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsls_25m_div2_clk>,
+				 <&hsls_25m_div2_clk>,
+				 <&hsls_div4_clk>;
+			clock-names = "timer1", "timer2", "apb_pclk";
+			status = "disabled";
+		};
+
+		timer7: timer@000a0000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x000a0000 0x1000>;
+			interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsls_25m_div2_clk>,
+				 <&hsls_25m_div2_clk>,
+				 <&hsls_div4_clk>;
+			clock-names = "timer1", "timer2", "apb_pclk";
+			status = "disabled";
+		};
+
 		i2c0: i2c@000b0000 {
 			compatible = "brcm,iproc-i2c";
 			reg = <0x000b0000 0x100>;
@@ -424,6 +551,15 @@
 			iommus = <&smmu 0x6000 0x0000>;
 		};
 
+		enet: ethernet@00340000{
+			compatible = "brcm,amac";
+			reg = <0x00340000 0x1000>;
+			reg-names = "amac_base";
+			dma-coherent;
+			interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>;
+			status= "disabled";
+		};
+
 		nand: nand@00360000 {
 			compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
 			reg = <0x00360000 0x600>,
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
index 105b2938082f..297597442c44 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
@@ -307,20 +307,6 @@
 	samsung,pll-clock-frequency = <24000000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&te_irq>;
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@1 {
-			reg = <1>;
-
-			dsi_out: endpoint {
-				samsung,burst-clock-frequency = <512000000>;
-				samsung,esc-clock-frequency = <16000000>;
-			};
-		};
-	};
 };
 
 &hdmi {
@@ -843,7 +829,6 @@
 
 &mshc_0 {
 	status = "okay";
-	num-slots = <1>;
 	mmc-hs200-1_8v;
 	mmc-hs400-1_8v;
 	cap-mmc-highspeed;
@@ -865,7 +850,6 @@
 
 &mshc_2 {
 	status = "okay";
-	num-slots = <1>;
 	cap-sd-highspeed;
 	disable-wp;
 	cd-gpios = <&gpa2 4 GPIO_ACTIVE_HIGH>;
@@ -1210,8 +1194,9 @@
 	status = "okay";
 };
 
-&usbdrd_dwc3_0 {
+&usbdrd_dwc3 {
 	dr_mode = "otg";
+	extcon = <&muic>;
 };
 
 &usbdrd30_phy {
diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
index 727f36abf3d4..7fe994b750da 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
@@ -1367,7 +1367,7 @@
 			ranges;
 			status = "disabled";
 
-			dwc3@15400000 {
+			usbdrd_dwc3: dwc3@15400000 {
 				compatible = "snps,dwc3";
 				reg = <0x15400000 0x10000>;
 				interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
@@ -1414,7 +1414,7 @@
 			ranges;
 			status = "disabled";
 
-			usbdrd_dwc3_0: dwc3@15a00000 {
+			usbhost_dwc3: dwc3@15a00000 {
 				compatible = "snps,dwc3";
 				reg = <0x15a00000 0x10000>;
 				interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
index e5892bb0ae6e..4a8b1fb51243 100644
--- a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
+++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
@@ -359,7 +359,6 @@
 
 &mmc_0 {
 	status = "okay";
-	num-slots = <1>;
 	cap-mmc-highspeed;
 	mmc-hs200-1_8v;
 	non-removable;
@@ -375,7 +374,6 @@
 
 &mmc_2 {
 	status = "okay";
-	num-slots = <1>;
 	cap-sd-highspeed;
 	card-detect-delay = <200>;
 	clock-frequency = <400000000>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
index b1554cbd2c54..df83915d6ea6 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -444,6 +444,15 @@
 				 <&clockgen 4 3>;
 		};
 
+		usb0: usb3@2f00000 {
+			compatible = "snps,dwc3";
+			reg = <0x0 0x2f00000 0x0 0x10000>;
+			interrupts = <0 60 0x4>;
+			dr_mode = "host";
+			snps,quirk-frame-length-adjustment = <0x20>;
+			snps,dis_rxdet_inp3_quirk;
+		};
+
 		sata: sata@3200000 {
 			compatible = "fsl,ls1012a-ahci", "fsl,ls1043a-ahci";
 			reg = <0x0 0x3200000 0x0 0x10000>,
@@ -454,5 +463,13 @@
 			dma-coherent;
 			status = "disabled";
 		};
+
+		usb1: usb2@8600000 {
+			compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
+			reg = <0x0 0x8600000 0x0 0x1000>;
+			interrupts = <0 139 0x4>;
+			dr_mode = "host";
+			phy_type = "ulpi";
+		};
 	};
 };
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
index 213abb72de93..0f6fcda36b9e 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
@@ -49,7 +49,7 @@
 #include "fsl-ls1088a.dtsi"
 
 / {
-	model = "L1088A RDB Board";
+	model = "LS1088A RDB Board";
 	compatible = "fsl,ls1088a-rdb", "fsl,ls1088a";
 };
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index c144d06a6e33..33797b373674 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -52,6 +52,10 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	aliases {
+		crypto = &crypto;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -62,6 +66,7 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0>;
 			clocks = <&clockgen 1 0>;
+			cpu-idle-states = <&CPU_PH20>;
 			#cooling-cells = <2>;
 		};
 
@@ -70,6 +75,7 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x1>;
 			clocks = <&clockgen 1 0>;
+			cpu-idle-states = <&CPU_PH20>;
 		};
 
 		cpu2: cpu@2 {
@@ -77,6 +83,7 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x2>;
 			clocks = <&clockgen 1 0>;
+			cpu-idle-states = <&CPU_PH20>;
 		};
 
 		cpu3: cpu@3 {
@@ -84,6 +91,7 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x3>;
 			clocks = <&clockgen 1 0>;
+			cpu-idle-states = <&CPU_PH20>;
 		};
 
 		cpu4: cpu@100 {
@@ -91,6 +99,7 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x100>;
 			clocks = <&clockgen 1 1>;
+			cpu-idle-states = <&CPU_PH20>;
 			#cooling-cells = <2>;
 		};
 
@@ -99,6 +108,7 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x101>;
 			clocks = <&clockgen 1 1>;
+			cpu-idle-states = <&CPU_PH20>;
 		};
 
 		cpu6: cpu@102 {
@@ -106,6 +116,7 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x102>;
 			clocks = <&clockgen 1 1>;
+			cpu-idle-states = <&CPU_PH20>;
 		};
 
 		cpu7: cpu@103 {
@@ -113,6 +124,16 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x103>;
 			clocks = <&clockgen 1 1>;
+			cpu-idle-states = <&CPU_PH20>;
+		};
+
+		CPU_PH20: cpu-ph20 {
+			compatible = "arm,idle-state";
+			idle-state-name = "PH20";
+			arm,psci-suspend-param = <0x00010000>;
+			entry-latency-us = <1000>;
+			exit-latency-us = <1000>;
+			min-residency-us = <3000>;
 		};
 	};
 
@@ -136,6 +157,11 @@
 			     <1 10 IRQ_TYPE_LEVEL_LOW>;/* Hypervisor PPI */
 	};
 
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
 	sysclk: sysclk {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -369,6 +395,45 @@
 			dma-coherent;
 			status = "disabled";
 		};
+
+		crypto: crypto@8000000 {
+			compatible = "fsl,sec-v5.0", "fsl,sec-v4.0";
+			fsl,sec-era = <8>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x00 0x8000000 0x100000>;
+			reg = <0x00 0x8000000 0x0 0x100000>;
+			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
+
+			sec_jr0: jr@10000 {
+				compatible = "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg	   = <0x10000 0x10000>;
+				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sec_jr1: jr@20000 {
+				compatible = "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg	   = <0x20000 0x10000>;
+				interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sec_jr2: jr@30000 {
+				compatible = "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg	   = <0x30000 0x10000>;
+				interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sec_jr3: jr@40000 {
+				compatible = "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg	   = <0x40000 0x10000>;
+				interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
 	};
 
 };
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts
index ed209cd57283..3c99608b9b45 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts
@@ -55,11 +55,6 @@
 	model = "Freescale Layerscape 2080a QDS Board";
 	compatible = "fsl,ls2080a-qds", "fsl,ls2080a";
 
-	aliases {
-		serial0 = &serial0;
-		serial1 = &serial1;
-	};
-
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts
index 67ec3f9c81a1..a4e7de9f70d8 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts
@@ -55,11 +55,6 @@
 	model = "Freescale Layerscape 2080a RDB Board";
 	compatible = "fsl,ls2080a-rdb", "fsl,ls2080a";
 
-	aliases {
-		serial0 = &serial0;
-		serial1 = &serial1;
-	};
-
 	chosen {
 		stdout-path = "serial1:115200n8";
 	};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts
index 3ee718f0aaf8..fbbb73e571c0 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts
@@ -52,11 +52,6 @@
 	model = "Freescale Layerscape 2080a software Simulator model";
 	compatible = "fsl,ls2080a-simu", "fsl,ls2080a";
 
-	aliases {
-		serial0 = &serial0;
-		serial1 = &serial1;
-	};
-
 	ethernet@2210000 {
 		compatible = "smsc,lan91c111";
 		reg = <0x0 0x2210000 0x0 0x100>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
index d789c6814e6a..8d739301e7b8 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
@@ -53,6 +53,7 @@
 		compatible = "arm,cortex-a57";
 		reg = <0x0>;
 		clocks = <&clockgen 1 0>;
+		cpu-idle-states = <&CPU_PW20>;
 		next-level-cache = <&cluster0_l2>;
 		#cooling-cells = <2>;
 	};
@@ -62,6 +63,7 @@
 		compatible = "arm,cortex-a57";
 		reg = <0x1>;
 		clocks = <&clockgen 1 0>;
+		cpu-idle-states = <&CPU_PW20>;
 		next-level-cache = <&cluster0_l2>;
 	};
 
@@ -70,6 +72,7 @@
 		compatible = "arm,cortex-a57";
 		reg = <0x100>;
 		clocks = <&clockgen 1 1>;
+		cpu-idle-states = <&CPU_PW20>;
 		next-level-cache = <&cluster1_l2>;
 		#cooling-cells = <2>;
 	};
@@ -79,6 +82,7 @@
 		compatible = "arm,cortex-a57";
 		reg = <0x101>;
 		clocks = <&clockgen 1 1>;
+		cpu-idle-states = <&CPU_PW20>;
 		next-level-cache = <&cluster1_l2>;
 	};
 
@@ -87,6 +91,7 @@
 		compatible = "arm,cortex-a57";
 		reg = <0x200>;
 		clocks = <&clockgen 1 2>;
+		cpu-idle-states = <&CPU_PW20>;
 		next-level-cache = <&cluster2_l2>;
 		#cooling-cells = <2>;
 	};
@@ -96,6 +101,7 @@
 		compatible = "arm,cortex-a57";
 		reg = <0x201>;
 		clocks = <&clockgen 1 2>;
+		cpu-idle-states = <&CPU_PW20>;
 		next-level-cache = <&cluster2_l2>;
 	};
 
@@ -105,6 +111,7 @@
 		reg = <0x300>;
 		clocks = <&clockgen 1 3>;
 		next-level-cache = <&cluster3_l2>;
+		cpu-idle-states = <&CPU_PW20>;
 		#cooling-cells = <2>;
 	};
 
@@ -113,6 +120,7 @@
 		compatible = "arm,cortex-a57";
 		reg = <0x301>;
 		clocks = <&clockgen 1 3>;
+		cpu-idle-states = <&CPU_PW20>;
 		next-level-cache = <&cluster3_l2>;
 	};
 
@@ -131,6 +139,15 @@
 	cluster3_l2: l2-cache3 {
 		compatible = "cache";
 	};
+
+	CPU_PW20: cpu-pw20 {
+		compatible = "arm,idle-state";
+		idle-state-name = "PW20";
+		arm,psci-suspend-param = <0x00010000>;
+		entry-latency-us = <2000>;
+		exit-latency-us = <2000>;
+		min-residency-us = <6000>;
+	};
 };
 
 &pcie1 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts
index 4a1df5ce3229..eaee5b1c3a44 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts
@@ -54,11 +54,6 @@
 	model = "Freescale Layerscape 2088A QDS Board";
 	compatible = "fsl,ls2088a-qds", "fsl,ls2088a";
 
-	aliases {
-		serial0 = &serial0;
-		serial1 = &serial1;
-	};
-
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
index a76d4b4debd1..c411442cac62 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
@@ -54,11 +54,6 @@
 	model = "Freescale Layerscape 2088A RDB Board";
 	compatible = "fsl,ls2088a-rdb", "fsl,ls2088a";
 
-	aliases {
-		serial0 = &serial0;
-		serial1 = &serial1;
-	};
-
 	chosen {
 		stdout-path = "serial1:115200n8";
 	};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
index 5c695c658056..6aa319dae396 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
@@ -53,6 +53,7 @@
 		compatible = "arm,cortex-a72";
 		reg = <0x0>;
 		clocks = <&clockgen 1 0>;
+		cpu-idle-states = <&CPU_PW20>;
 		next-level-cache = <&cluster0_l2>;
 		#cooling-cells = <2>;
 	};
@@ -62,6 +63,7 @@
 		compatible = "arm,cortex-a72";
 		reg = <0x1>;
 		clocks = <&clockgen 1 0>;
+		cpu-idle-states = <&CPU_PW20>;
 		next-level-cache = <&cluster0_l2>;
 	};
 
@@ -70,6 +72,7 @@
 		compatible = "arm,cortex-a72";
 		reg = <0x100>;
 		clocks = <&clockgen 1 1>;
+		cpu-idle-states = <&CPU_PW20>;
 		next-level-cache = <&cluster1_l2>;
 		#cooling-cells = <2>;
 	};
@@ -79,6 +82,7 @@
 		compatible = "arm,cortex-a72";
 		reg = <0x101>;
 		clocks = <&clockgen 1 1>;
+		cpu-idle-states = <&CPU_PW20>;
 		next-level-cache = <&cluster1_l2>;
 	};
 
@@ -88,6 +92,7 @@
 		reg = <0x200>;
 		clocks = <&clockgen 1 2>;
 		next-level-cache = <&cluster2_l2>;
+		cpu-idle-states = <&CPU_PW20>;
 		#cooling-cells = <2>;
 	};
 
@@ -96,6 +101,7 @@
 		compatible = "arm,cortex-a72";
 		reg = <0x201>;
 		clocks = <&clockgen 1 2>;
+		cpu-idle-states = <&CPU_PW20>;
 		next-level-cache = <&cluster2_l2>;
 	};
 
@@ -104,6 +110,7 @@
 		compatible = "arm,cortex-a72";
 		reg = <0x300>;
 		clocks = <&clockgen 1 3>;
+		cpu-idle-states = <&CPU_PW20>;
 		next-level-cache = <&cluster3_l2>;
 		#cooling-cells = <2>;
 	};
@@ -113,6 +120,7 @@
 		compatible = "arm,cortex-a72";
 		reg = <0x301>;
 		clocks = <&clockgen 1 3>;
+		cpu-idle-states = <&CPU_PW20>;
 		next-level-cache = <&cluster3_l2>;
 	};
 
@@ -131,6 +139,15 @@
 	cluster3_l2: l2-cache3 {
 		compatible = "cache";
 	};
+
+	CPU_PW20: cpu-pw20 {
+		compatible = "arm,idle-state";
+		idle-state-name = "PW20";
+		arm,psci-suspend-param = <0x00010000>;
+		entry-latency-us = <2000>;
+		exit-latency-us = <2000>;
+		min-residency-us = <6000>;
+	};
 };
 
 &pcie1 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index 94cdd3045037..4fb9a0966a84 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -46,6 +46,7 @@
  */
 
 #include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
 
 / {
 	compatible = "fsl,ls2080a";
@@ -53,6 +54,12 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	aliases {
+		crypto = &crypto;
+		serial0 = &serial0;
+		serial1 = &serial1;
+	};
+
 	cpu: cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -118,6 +125,11 @@
 		interrupts = <1 7 0x8>; /* PMU PPI, Level low type */
 	};
 
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <2>;
@@ -301,6 +313,45 @@
 			clock-names = "apb_pclk", "wdog_clk";
 		};
 
+		crypto: crypto@8000000 {
+			compatible = "fsl,sec-v5.0", "fsl,sec-v4.0";
+			fsl,sec-era = <8>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x00 0x8000000 0x100000>;
+			reg = <0x00 0x8000000 0x0 0x100000>;
+			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
+
+			sec_jr0: jr@10000 {
+				compatible = "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg	   = <0x10000 0x10000>;
+				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sec_jr1: jr@20000 {
+				compatible = "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg	   = <0x20000 0x10000>;
+				interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sec_jr2: jr@30000 {
+				compatible = "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg	   = <0x30000 0x10000>;
+				interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sec_jr3: jr@40000 {
+				compatible = "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg	   = <0x40000 0x10000>;
+				interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
 		fsl_mc: fsl-mc@80c000000 {
 			compatible = "fsl,qoriq-mc";
 			reg = <0x00000008 0x0c000000 0 0x40>,	 /* MC portal base */
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
index 6609b0fe7a8b..fd4705c451e2 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
@@ -39,6 +39,34 @@
 		reg = <0x0 0x0 0x0 0x0>;
 	};
 
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ramoops@32000000 {
+			compatible = "ramoops";
+			reg = <0x0 0x32000000 0x0 0x00100000>;
+			record-size	= <0x00020000>;
+			console-size	= <0x00020000>;
+			ftrace-size	= <0x00020000>;
+		};
+	};
+
+	reboot-mode-syscon@32100000 {
+		compatible = "syscon", "simple-mfd";
+		reg = <0x0 0x32100000 0x0 0x00001000>;
+
+		reboot-mode {
+			compatible = "syscon-reboot-mode";
+			offset = <0x0>;
+
+			mode-normal	= <0x77665501>;
+			mode-bootloader	= <0x77665500>;
+			mode-recovery	= <0x77665502>;
+		};
+	};
+
 	keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
@@ -159,6 +187,13 @@
 		startup-delay-us = <70000>;
 		enable-active-high;
 	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
 };
 
 &i2c0 {
@@ -195,7 +230,7 @@
 	bluetooth {
 		compatible = "ti,wl1837-st";
 		enable-gpios = <&gpio15 6 GPIO_ACTIVE_HIGH>;
-		max-speed = <921600>;
+		max-speed = <3000000>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
index c6a1961e8d55..b7a90d632959 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
@@ -58,6 +58,8 @@
 			device_type = "cpu";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
+			next-level-cache = <&A53_L2>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_0>;
 		};
 
 		cpu1: cpu@1 {
@@ -65,6 +67,8 @@
 			device_type = "cpu";
 			reg = <0x0 0x1>;
 			enable-method = "psci";
+			next-level-cache = <&A53_L2>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_0>;
 		};
 
 		cpu2: cpu@2 {
@@ -72,6 +76,8 @@
 			device_type = "cpu";
 			reg = <0x0 0x2>;
 			enable-method = "psci";
+			next-level-cache = <&A53_L2>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_0>;
 		};
 
 		cpu3: cpu@3 {
@@ -79,6 +85,8 @@
 			device_type = "cpu";
 			reg = <0x0 0x3>;
 			enable-method = "psci";
+			next-level-cache = <&A53_L2>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_0>;
 		};
 
 		cpu4: cpu@100 {
@@ -86,6 +94,12 @@
 			device_type = "cpu";
 			reg = <0x0 0x100>;
 			enable-method = "psci";
+			next-level-cache = <&A73_L2>;
+			cpu-idle-states = <
+					&CPU_NAP
+					&CPU_SLEEP
+					&CLUSTER_SLEEP_1
+			>;
 		};
 
 		cpu5: cpu@101 {
@@ -93,6 +107,12 @@
 			device_type = "cpu";
 			reg = <0x0 0x101>;
 			enable-method = "psci";
+			next-level-cache = <&A73_L2>;
+			cpu-idle-states = <
+					&CPU_NAP
+					&CPU_SLEEP
+					&CLUSTER_SLEEP_1
+			>;
 		};
 
 		cpu6: cpu@102 {
@@ -100,6 +120,12 @@
 			device_type = "cpu";
 			reg = <0x0 0x102>;
 			enable-method = "psci";
+			next-level-cache = <&A73_L2>;
+			cpu-idle-states = <
+					&CPU_NAP
+					&CPU_SLEEP
+					&CLUSTER_SLEEP_1
+			>;
 		};
 
 		cpu7: cpu@103 {
@@ -107,6 +133,59 @@
 			device_type = "cpu";
 			reg = <0x0 0x103>;
 			enable-method = "psci";
+			next-level-cache = <&A73_L2>;
+			cpu-idle-states = <
+					&CPU_NAP
+					&CPU_SLEEP
+					&CLUSTER_SLEEP_1
+			>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_NAP: cpu-nap {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0000001>;
+				entry-latency-us = <7>;
+				exit-latency-us = <2>;
+				min-residency-us = <15>;
+			};
+
+			CPU_SLEEP: cpu-sleep {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x0010000>;
+				entry-latency-us = <40>;
+				exit-latency-us = <70>;
+				min-residency-us = <3000>;
+			};
+
+			CLUSTER_SLEEP_0: cluster-sleep-0 {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x1010000>;
+				entry-latency-us = <500>;
+				exit-latency-us = <5000>;
+				min-residency-us = <20000>;
+			};
+
+			CLUSTER_SLEEP_1: cluster-sleep-1 {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x1010000>;
+				entry-latency-us = <1000>;
+				exit-latency-us = <5000>;
+				min-residency-us = <20000>;
+			};
+		};
+
+		A53_L2: l2-cache0 {
+			compatible = "cache";
+		};
+
+		A73_L2: l2-cache1 {
+			compatible = "cache";
 		};
 	};
 
@@ -123,6 +202,26 @@
 					 IRQ_TYPE_LEVEL_HIGH)>;
 	};
 
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>,
+				     <&cpu1>,
+				     <&cpu2>,
+				     <&cpu3>,
+				     <&cpu4>,
+				     <&cpu5>,
+				     <&cpu6>,
+				     <&cpu7>;
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupt-parent = <&gic>;
@@ -337,6 +436,19 @@
 			status = "disabled";
 		};
 
+		dma0: dma@fdf30000 {
+			compatible = "hisilicon,k3-dma-1.0";
+			reg = <0x0 0xfdf30000 0x0 0x1000>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			dma-requests = <32>;
+			dma-min-chan = <1>;
+			interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3660_CLK_GATE_DMAC>;
+			dma-no-cci;
+			dma-type = "hi3660_dma";
+		};
+
 		rtc0: rtc@fff04000 {
 			compatible = "arm,pl031", "arm,primecell";
 			reg = <0x0 0Xfff04000 0x0 0x1000>;
@@ -810,6 +922,7 @@
 			clock-names = "ciu", "biu";
 			clock-frequency = <3200000>;
 			resets = <&crg_rst 0x94 18>;
+			reset-names = "reset";
 			cd-gpios = <&gpio25 3 0>;
 			hisilicon,peripheral-syscon = <&sctrl>;
 			pinctrl-names = "default";
@@ -839,6 +952,7 @@
 				 <&crg_ctrl HI3660_HCLK_GATE_SDIO0>;
 			clock-names = "ciu", "biu";
 			resets = <&crg_rst 0x94 20>;
+			reset-names = "reset";
 			card-detect-delay = <200>;
 			supports-highspeed;
 			keep-power-in-suspend;
@@ -848,5 +962,21 @@
 				     &sdio_cfg_func>;
 			status = "disabled";
 		};
+
+		watchdog0: watchdog@e8a06000 {
+			compatible = "arm,sp805-wdt", "arm,primecell";
+			reg = <0x0 0xe8a06000 0x0 0x1000>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3660_OSC32K>;
+			clock-names = "apb_pclk";
+		};
+
+		watchdog1: watchdog@e8a07000 {
+			compatible = "arm,sp805-wdt", "arm,primecell";
+			reg = <0x0 0xe8a07000 0x0 0x1000>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3660_OSC32K>;
+			clock-names = "apb_pclk";
+		};
 	};
 };
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
index eacbe0db5bc2..02a3aa4b2165 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
@@ -262,6 +262,12 @@
 			#clock-cells = <1>;
 		};
 
+		acpu_sctrl: acpu_sctrl@f6504000 {
+			compatible = "hisilicon,hi6220-acpu-sctrl", "syscon";
+			reg = <0x0 0xf6504000 0x0 0x1000>;
+			#clock-cells = <1>;
+		};
+
 		medianoc_ade: medianoc_ade@f4520000 {
 			compatible = "syscon";
 			reg = <0x0 0xf4520000 0x0 0x4000>;
@@ -755,7 +761,8 @@
 			dr_mode = "otg";
 			g-rx-fifo-size = <512>;
 			g-np-tx-fifo-size = <128>;
-			g-tx-fifo-size = <128 128 128 128 128 128>;
+			g-tx-fifo-size = <128 128 128 128 128 128 128 128
+					   16  16  16  16  16  16  16>;
 			interrupts = <0 77 0x4>;
 		};
 
diff --git a/arch/arm64/boot/dts/hisilicon/hip07-d05.dts b/arch/arm64/boot/dts/hisilicon/hip07-d05.dts
index f5d7f0889b41..fe7c16c36025 100644
--- a/arch/arm64/boot/dts/hisilicon/hip07-d05.dts
+++ b/arch/arm64/boot/dts/hisilicon/hip07-d05.dts
@@ -84,3 +84,7 @@
 &sas1 {
 	status = "ok";
 };
+
+&p0_pcie2_a {
+	status = "ok";
+};
diff --git a/arch/arm64/boot/dts/hisilicon/hip07.dtsi b/arch/arm64/boot/dts/hisilicon/hip07.dtsi
index 283d7b532e16..2c01a21c3665 100644
--- a/arch/arm64/boot/dts/hisilicon/hip07.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hip07.dtsi
@@ -1534,5 +1534,27 @@
 				     <637 1>,<638 1>,<639 1>;
 			status = "disabled";
 		};
+
+		p0_pcie2_a: pcie@a00a0000 {
+			compatible = "hisilicon,hip07-pcie-ecam";
+			reg = <0 0xaf800000 0 0x800000>,
+			      <0 0xa00a0000 0 0x10000>;
+			bus-range = <0xf8 0xff>;
+			msi-map = <0xf800 &p0_its_dsa_a 0xf800 0x800>;
+			msi-map-mask = <0xffff>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			dma-coherent;
+			ranges = <0x02000000 0 0xa8000000 0 0xa8000000 0 0x77f0000
+				  0x01000000 0 0 0 0xaf7f0000 0 0x10000>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map = <0x0 0 0 1 &mbigen_pcie2_a 671 4
+					 0x0 0 0 2 &mbigen_pcie2_a 671 4
+					 0x0 0 0 3 &mbigen_pcie2_a 671 4
+					 0x0 0 0 4 &mbigen_pcie2_a 671 4>;
+			status = "disabled";
+		};
 	};
 };
diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile
index 3e6ce6c15a74..6cff81eeaae2 100644
--- a/arch/arm64/boot/dts/marvell/Makefile
+++ b/arch/arm64/boot/dts/marvell/Makefile
@@ -8,6 +8,7 @@ dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-7040-db.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-db.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-mcbin.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-8080-db.dtb
 
 always		:= $(dtb-y)
 subdir-y	:= $(dts-dirs)
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
index e3a136ed77b0..2ce52ba74f73 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
@@ -45,6 +45,7 @@
 
 /dts-v1/;
 
+#include <dt-bindings/gpio/gpio.h>
 #include "armada-372x.dtsi"
 
 / {
@@ -59,6 +60,20 @@
 		device_type = "memory";
 		reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
 	};
+
+	vcc_sd_reg1: regulator {
+		compatible = "regulator-gpio";
+		regulator-name = "vcc_sd1";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+
+		gpios = <&gpionb 4 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+		states = <1800000 0x1
+			  3300000 0x0>;
+		enable-active-high;
+	};
 };
 
 /* J9 */
@@ -71,6 +86,16 @@
 	status = "okay";
 };
 
+/* J1 */
+&sdhci1 {
+	wp-inverted;
+	bus-width = <4>;
+	cd-gpios = <&gpionb 3 GPIO_ACTIVE_LOW>;
+	marvell,pad-type = "sd";
+	vqmmc-supply = <&vcc_sd_reg1>;
+	status = "okay";
+};
+
 /* Exported on the micro USB connector J5 through an FTDI */
 &uart0 {
 	status = "okay";
@@ -81,6 +106,11 @@
 	status = "okay";
 };
 
+/* J8 */
+&usb2 {
+	status = "okay";
+};
+
 &mdio {
 	switch0: switch0@1 {
 		compatible = "marvell,mv88e6085";
diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
index 51763d674050..8c0cf7efac65 100644
--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -81,6 +81,11 @@
 			     <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <2>;
@@ -322,7 +327,11 @@
 				#interrupt-cells = <3>;
 				interrupt-controller;
 				reg = <0x1d00000 0x10000>, /* GICD */
-				      <0x1d40000 0x40000>; /* GICR */
+				      <0x1d40000 0x40000>, /* GICR */
+				      <0x1d80000 0x2000>,  /* GICC */
+				      <0x1d90000 0x2000>,  /* GICH */
+				      <0x1da0000 0x20000>; /* GICV */
+				interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 			};
 		};
 
diff --git a/arch/arm64/boot/dts/marvell/armada-7040-db.dts b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
index 92c761c380d3..9c3bdf87e543 100644
--- a/arch/arm64/boot/dts/marvell/armada-7040-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
@@ -44,6 +44,7 @@
  * Device Tree file for Marvell Armada 7040 Development board platform
  */
 
+#include <dt-bindings/gpio/gpio.h>
 #include "armada-7040.dtsi"
 
 / {
@@ -59,6 +60,34 @@
 		device_type = "memory";
 		reg = <0x0 0x0 0x0 0x80000000>;
 	};
+
+	cpm_reg_usb3_0_vbus: cpm-usb3-0-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb3h0-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&expander0 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	cpm_reg_usb3_1_vbus: cpm-usb3-1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb3h1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&expander0 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	cpm_usb3_0_phy: cpm-usb3-0-phy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&cpm_reg_usb3_0_vbus>;
+	};
+
+	cpm_usb3_1_phy: cpm-usb3-1-phy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&cpm_reg_usb3_1_vbus>;
+	};
 };
 
 &i2c0 {
@@ -105,6 +134,14 @@
 &cpm_i2c0 {
 	status = "okay";
 	clock-frequency = <100000>;
+
+	expander0: pca9555@21 {
+		compatible = "nxp,pca9555";
+		pinctrl-names = "default";
+		gpio-controller;
+		#gpio-cells = <2>;
+		reg = <0x21>;
+	};
 };
 
 &cpm_spi1 {
@@ -140,10 +177,12 @@
 };
 
 &cpm_usb3_0 {
+	usb-phy = <&cpm_usb3_0_phy>;
 	status = "okay";
 };
 
 &cpm_usb3_1 {
+	usb-phy = <&cpm_usb3_1_phy>;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
index 1e8f7242ed6f..0d7b2ae46610 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
@@ -44,6 +44,7 @@
  * Device Tree file for Marvell Armada 8040 Development board platform
  */
 
+#include <dt-bindings/gpio/gpio.h>
 #include "armada-8040.dtsi"
 
 / {
@@ -59,6 +60,48 @@
 		device_type = "memory";
 		reg = <0x0 0x0 0x0 0x80000000>;
 	};
+
+	cpm_reg_usb3_0_vbus: cpm-usb3-0-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "cpm-usb3h0-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&expander0 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	cpm_reg_usb3_1_vbus: cpm-usb3-1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "cpm-usb3h1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&expander0 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	cpm_usb3_0_phy: cpm-usb3-0-phy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&cpm_reg_usb3_0_vbus>;
+	};
+
+	cpm_usb3_1_phy: cpm-usb3-1-phy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&cpm_reg_usb3_1_vbus>;
+	};
+
+	cps_reg_usb3_0_vbus: cps-usb3-0-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "cps-usb3h0-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&expander1 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	cps_usb3_0_phy: cps-usb3-0-phy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&cps_reg_usb3_0_vbus>;
+	};
 };
 
 &i2c0 {
@@ -107,6 +150,25 @@
 &cpm_i2c0 {
 	status = "okay";
 	clock-frequency = <100000>;
+
+	/* U31 */
+	expander0: pca9555@21 {
+		compatible = "nxp,pca9555";
+		pinctrl-names = "default";
+		gpio-controller;
+		#gpio-cells = <2>;
+		reg = <0x21>;
+	};
+
+	/* U25 */
+	expander1: pca9555@25 {
+		compatible = "nxp,pca9555";
+		pinctrl-names = "default";
+		gpio-controller;
+		#gpio-cells = <2>;
+		reg = <0x25>;
+	};
+
 };
 
 /* CON4 on CP0 expansion */
@@ -116,11 +178,13 @@
 
 /* CON9 on CP0 expansion */
 &cpm_usb3_0 {
+	usb-phy = <&cpm_usb3_0_phy>;
 	status = "okay";
 };
 
 /* CON10 on CP0 expansion */
 &cpm_usb3_1 {
+	usb-phy = <&cpm_usb3_1_phy>;
 	status = "okay";
 };
 
@@ -159,6 +223,7 @@
 
 /* CON9 on CP1 expansion */
 &cps_usb3_0 {
+	usb-phy = <&cps_usb3_0_phy>;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
index 4968e731de61..acf5c7d16d79 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
@@ -46,11 +46,17 @@
 
 #include "armada-8040.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
+
 / {
 	model = "Marvell 8040 MACHIATOBin";
 	compatible = "marvell,armada8040-mcbin", "marvell,armada8040",
 			"marvell,armada-ap806-quad", "marvell,armada-ap806";
 
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
 	memory@00000000 {
 		device_type = "memory";
 		reg = <0x0 0x0 0x0 0x80000000>;
@@ -77,11 +83,13 @@
 
 	v_5v0_usb3_hst_vbus: regulator-usb3-vbus0 {
 		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&cpm_gpio2 15 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cpm_xhci_vbus_pins>;
 		regulator-name = "v_5v0_usb3_hst_vbus";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		/* actually GPIO controlled, but 8k has no GPIO support yet */
-		regulator-always-on;
 		status = "okay";
 	};
 
@@ -112,10 +120,44 @@
 
 &cpm_i2c0 {
 	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&cpm_i2c0_pins>;
 	status = "okay";
 };
 
+&cpm_i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&cpm_i2c1_pins>;
+	status = "okay";
+
+	i2c-switch@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+
+		sfpp0_i2c: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+		sfpp1_i2c: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+		sfp_1g_i2c: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+	};
+};
+
 &cpm_mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cpm_ge_mdio_pins>;
 	status = "okay";
 
 	ge_phy: ethernet-phy@0 {
@@ -123,6 +165,67 @@
 	};
 };
 
+&cpm_pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cpm_pcie_pins>;
+	num-lanes = <4>;
+	num-viewport = <8>;
+	reset-gpio = <&cpm_gpio1 20 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&cpm_pinctrl {
+	cpm_ge_mdio_pins: ge-mdio-pins {
+		marvell,pins = "mpp32", "mpp34";
+		marvell,function = "ge";
+	};
+	cpm_i2c1_pins: i2c1-pins {
+		marvell,pins = "mpp35", "mpp36";
+		marvell,function = "i2c1";
+	};
+	cpm_i2c0_pins: i2c0-pins {
+		marvell,pins = "mpp37", "mpp38";
+		marvell,function = "i2c0";
+	};
+	cpm_xhci_vbus_pins: xhci0-vbus-pins {
+		marvell,pins = "mpp47";
+		marvell,function = "gpio";
+	};
+	cpm_pcie_pins: pcie-pins {
+		marvell,pins = "mpp52";
+		marvell,function = "gpio";
+	};
+	cpm_sdhci_pins: sdhci-pins {
+		marvell,pins = "mpp55", "mpp56", "mpp57", "mpp58", "mpp59",
+			       "mpp60", "mpp61";
+		marvell,function = "sdio";
+	};
+};
+
+&cpm_xmdio {
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <0>;
+	};
+
+	phy8: ethernet-phy@8 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <8>;
+	};
+};
+
+&cpm_ethernet {
+	status = "okay";
+};
+
+&cpm_eth0 {
+	status = "okay";
+	phy = <&phy0>;
+	phy-mode = "10gbase-kr";
+};
+
 &cpm_sata0 {
 	/* CPM Lane 0 - U29 */
 	status = "okay";
@@ -132,6 +235,8 @@
 	/* U6 */
 	broken-cd;
 	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&cpm_sdhci_pins>;
 	status = "okay";
 	vqmmc-supply = <&v_3_3>;
 };
@@ -150,6 +255,12 @@
 	status = "okay";
 };
 
+&cps_eth0 {
+	status = "okay";
+	phy = <&phy8>;
+	phy-mode = "10gbase-kr";
+};
+
 &cps_eth1 {
 	/* CPS Lane 0 - J5 (Gigabit RJ45) */
 	status = "okay";
@@ -157,6 +268,13 @@
 	phy-mode = "sgmii";
 };
 
+&cps_pinctrl {
+	cps_spi1_pins: spi1-pins {
+		marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15", "mpp16";
+		marvell,function = "spi1";
+	};
+};
+
 &cps_sata0 {
 	/* CPS Lane 1 - U32 */
 	/* CPS Lane 3 - U31 */
@@ -164,6 +282,8 @@
 };
 
 &cps_spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cps_spi1_pins>;
 	status = "okay";
 
 	spi-flash@0 {
diff --git a/arch/arm64/boot/dts/marvell/armada-8080-db.dts b/arch/arm64/boot/dts/marvell/armada-8080-db.dts
new file mode 100644
index 000000000000..707af833832b
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-8080-db.dts
@@ -0,0 +1,67 @@
+/*
+ * Copyright (C) 2017 Marvell Technology Group Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * Device Tree file for Marvell Armada-8080 Development board platform
+ */
+
+#include "armada-8080.dtsi"
+
+/ {
+	model = "Marvell 8080 board";
+	compatible = "marvell,armada-8080-db", "marvell,armada-8080",
+		     "marvell,armada-ap810-octa", "marvell,armada-ap810";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@00000000 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+};
+
+&uart0_ap0 {
+	clock-frequency = <384000>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-8080.dtsi b/arch/arm64/boot/dts/marvell/armada-8080.dtsi
new file mode 100644
index 000000000000..d5535b716735
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-8080.dtsi
@@ -0,0 +1,53 @@
+/*
+ * Copyright (C) 2017 Marvell Technology Group Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * Device Tree file for Marvell Armada-8080 SoC, made of an AP810 OCTA.
+ */
+
+#include "armada-ap810-ap0-octa-core.dtsi"
+
+/ {
+	model = "Marvell 8080 board";
+	compatible = "marvell,armada-8080", "marvell,armada-ap810-octa",
+				"marvell,armada-ap810";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-ap810-ap0-octa-core.dtsi b/arch/arm64/boot/dts/marvell/armada-ap810-ap0-octa-core.dtsi
new file mode 100644
index 000000000000..bf1b22b70384
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-ap810-ap0-octa-core.dtsi
@@ -0,0 +1,104 @@
+/*
+ * Copyright (C) 2017 Marvell Technology Group Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * Device Tree file for Marvell Armada AP810 OCTA cores.
+ */
+
+#include "armada-ap810-ap0.dtsi"
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "marvell,armada-ap810-octa";
+
+		cpu@000 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x000>;
+			enable-method = "psci";
+		};
+		cpu@001 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x001>;
+			enable-method = "psci";
+		};
+		cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x100>;
+			enable-method = "psci";
+		};
+		cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x101>;
+			enable-method = "psci";
+		};
+		cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x200>;
+			enable-method = "psci";
+		};
+		cpu@201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x201>;
+			enable-method = "psci";
+		};
+		cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x300>;
+			enable-method = "psci";
+		};
+		cpu@301 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x301>;
+			enable-method = "psci";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-ap810-ap0.dtsi b/arch/arm64/boot/dts/marvell/armada-ap810-ap0.dtsi
new file mode 100644
index 000000000000..7e6f039f0f80
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-ap810-ap0.dtsi
@@ -0,0 +1,163 @@
+/*
+ * Copyright (C) 2017 Marvell Technology Group Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * Device Tree file for Marvell Armada AP810.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/dts-v1/;
+
+/ {
+	model = "Marvell Armada AP810";
+	compatible = "marvell,armada-ap810";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart0_ap0;
+		serial1 = &uart1_ap0;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	ap810-ap0 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		config-space@e8000000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0x0 0x0 0xe8000000 0x4000000>;
+			interrupt-parent = <&gic>;
+
+			gic: interrupt-controller@3000000 {
+				compatible = "arm,gic-v3";
+				#interrupt-cells = <3>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				interrupt-controller;
+				interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
+
+				reg = <0x3000000 0x10000>,	/* GICD */
+				      <0x3060000 0x100000>,	/* GICR */
+				      <0x00c0000 0x2000>,	/* GICC */
+				      <0x00d0000 0x1000>,	/* GICH */
+				      <0x00e0000 0x2000>;	/* GICV */
+
+				gic_its_ap0: interrupt-controller@3040000 {
+					compatible = "arm,gic-v3-its";
+					msi-controller;
+					#msi-cells = <1>;
+					reg = <0x3040000 0x20000>;
+				};
+			};
+
+			timer {
+				compatible = "arm,armv8-timer";
+				interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+					     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+					     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+					     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+			};
+
+			xor@400000 {
+				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+				reg = <0x400000 0x1000>,
+				      <0x410000 0x1000>;
+				msi-parent = <&gic_its_ap0 0xa0>;
+				dma-coherent;
+			};
+
+			xor@420000 {
+				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+				reg = <0x420000 0x1000>,
+				      <0x430000 0x1000>;
+				msi-parent = <&gic_its_ap0 0xa1>;
+				dma-coherent;
+			};
+
+			xor@440000 {
+				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+				reg = <0x440000 0x1000>,
+				      <0x450000 0x1000>;
+				msi-parent = <&gic_its_ap0 0xa2>;
+				dma-coherent;
+			};
+
+			xor@460000 {
+				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+				reg = <0x460000 0x1000>,
+				      <0x470000 0x1000>;
+				msi-parent = <&gic_its_ap0 0xa3>;
+				dma-coherent;
+			};
+
+			uart0_ap0: serial@512000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x512000 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				status = "disabled";
+			};
+
+			uart1_ap0: serial@512100 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x512100 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
index 4c68605675a8..8263a8a504a8 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
@@ -65,25 +65,44 @@
 				reg = <0x0 0x100000>, <0x129000 0xb000>;
 				clocks = <&cpm_clk 1 3>, <&cpm_clk 1 9>, <&cpm_clk 1 5>;
 				clock-names = "pp_clk", "gop_clk", "mg_clk";
+				marvell,system-controller = <&cpm_syscon0>;
 				status = "disabled";
 				dma-coherent;
 
 				cpm_eth0: eth0 {
-					interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>,
+						     <ICU_GRP_NSR 43 IRQ_TYPE_LEVEL_HIGH>,
+						     <ICU_GRP_NSR 47 IRQ_TYPE_LEVEL_HIGH>,
+						     <ICU_GRP_NSR 51 IRQ_TYPE_LEVEL_HIGH>,
+						     <ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
+							  "tx-cpu3", "rx-shared";
 					port-id = <0>;
 					gop-port-id = <0>;
 					status = "disabled";
 				};
 
 				cpm_eth1: eth1 {
-					interrupts = <ICU_GRP_NSR 40 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <ICU_GRP_NSR 40 IRQ_TYPE_LEVEL_HIGH>,
+						     <ICU_GRP_NSR 44 IRQ_TYPE_LEVEL_HIGH>,
+						     <ICU_GRP_NSR 48 IRQ_TYPE_LEVEL_HIGH>,
+						     <ICU_GRP_NSR 52 IRQ_TYPE_LEVEL_HIGH>,
+						     <ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
+							  "tx-cpu3", "rx-shared";
 					port-id = <1>;
 					gop-port-id = <2>;
 					status = "disabled";
 				};
 
 				cpm_eth2: eth2 {
-					interrupts = <ICU_GRP_NSR 41 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <ICU_GRP_NSR 41 IRQ_TYPE_LEVEL_HIGH>,
+						     <ICU_GRP_NSR 45 IRQ_TYPE_LEVEL_HIGH>,
+						     <ICU_GRP_NSR 49 IRQ_TYPE_LEVEL_HIGH>,
+						     <ICU_GRP_NSR 53 IRQ_TYPE_LEVEL_HIGH>,
+						     <ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
+							  "tx-cpu3", "rx-shared";
 					port-id = <2>;
 					gop-port-id = <3>;
 					status = "disabled";
@@ -115,6 +134,13 @@
 				msi-parent = <&gicp>;
 			};
 
+			cpm_rtc: rtc@284000 {
+				compatible = "marvell,armada-8k-rtc";
+				reg = <0x284000 0x20>, <0x284080 0x24>;
+				reg-names = "rtc", "rtc-soc";
+				interrupts = <ICU_GRP_NSR 77 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
 			cpm_syscon0: system-controller@440000 {
 				compatible = "syscon", "simple-mfd";
 				reg = <0x440000 0x1000>;
@@ -131,8 +157,12 @@
 					gpio-controller;
 					#gpio-cells = <2>;
 					gpio-ranges = <&cpm_pinctrl 0 0 32>;
+					interrupt-controller;
+					interrupts = <ICU_GRP_NSR 86 IRQ_TYPE_LEVEL_HIGH>,
+						     <ICU_GRP_NSR 85 IRQ_TYPE_LEVEL_HIGH>,
+						     <ICU_GRP_NSR 84 IRQ_TYPE_LEVEL_HIGH>,
+						     <ICU_GRP_NSR 83 IRQ_TYPE_LEVEL_HIGH>;
 					status = "disabled";
-
 				};
 
 				cpm_gpio2: gpio@140 {
@@ -142,26 +172,15 @@
 					gpio-controller;
 					#gpio-cells = <2>;
 					gpio-ranges = <&cpm_pinctrl 0 32 31>;
+					interrupt-controller;
+					interrupts = <ICU_GRP_NSR 82 IRQ_TYPE_LEVEL_HIGH>,
+						     <ICU_GRP_NSR 81 IRQ_TYPE_LEVEL_HIGH>,
+						     <ICU_GRP_NSR 80 IRQ_TYPE_LEVEL_HIGH>,
+						     <ICU_GRP_NSR 79 IRQ_TYPE_LEVEL_HIGH>;
 					status = "disabled";
 				};
 			};
 
-			cpm_rtc: rtc@284000 {
-				compatible = "marvell,armada-8k-rtc";
-				reg = <0x284000 0x20>, <0x284080 0x24>;
-				reg-names = "rtc", "rtc-soc";
-				interrupts = <ICU_GRP_NSR 77 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			cpm_sata0: sata@540000 {
-				compatible = "marvell,armada-8k-ahci",
-					     "generic-ahci";
-				reg = <0x540000 0x30000>;
-				interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&cpm_clk 1 15>;
-				status = "disabled";
-			};
-
 			cpm_usb3_0: usb3@500000 {
 				compatible = "marvell,armada-8k-xhci",
 					     "generic-xhci";
@@ -182,6 +201,15 @@
 				status = "disabled";
 			};
 
+			cpm_sata0: sata@540000 {
+				compatible = "marvell,armada-8k-ahci",
+					     "generic-ahci";
+				reg = <0x540000 0x30000>;
+				interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cpm_clk 1 15>;
+				status = "disabled";
+			};
+
 			cpm_xor0: xor@6a0000 {
 				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
 				reg = <0x6a0000 0x1000>,
@@ -240,6 +268,21 @@
 				status = "disabled";
 			};
 
+			cpm_nand: nand@720000 {
+				/*
+				 * Due to the limiation of the pin available
+				 * this controller is only usable on the CPM
+				 * for A7K and on the CPS for A8K.
+				 */
+				compatible = "marvell,armada370-nand";
+				reg = <0x720000 0x54>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				interrupts = <ICU_GRP_NSR 115 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cpm_clk 1 2>;
+				status = "disabled";
+			};
+
 			cpm_trng: trng@760000 {
 				compatible = "marvell,armada-8k-rng", "inside-secure,safexcel-eip76";
 				reg = <0x760000 0x7d>;
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
index 923f354b02f0..b71ee6c83668 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
@@ -60,37 +60,49 @@
 			compatible = "simple-bus";
 			ranges = <0x0 0x0 0xf4000000 0x2000000>;
 
-			cps_rtc: rtc@284000 {
-				compatible = "marvell,armada-8k-rtc";
-				reg = <0x284000 0x20>, <0x284080 0x24>;
-				reg-names = "rtc", "rtc-soc";
-				interrupts = <ICU_GRP_NSR 77 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
 			cps_ethernet: ethernet@0 {
 				compatible = "marvell,armada-7k-pp22";
 				reg = <0x0 0x100000>, <0x129000 0xb000>;
 				clocks = <&cps_clk 1 3>, <&cps_clk 1 9>, <&cps_clk 1 5>;
 				clock-names = "pp_clk", "gop_clk", "mg_clk";
+				marvell,system-controller = <&cps_syscon0>;
 				status = "disabled";
 				dma-coherent;
 
 				cps_eth0: eth0 {
-					interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>,
+						     <ICU_GRP_NSR 43 IRQ_TYPE_LEVEL_HIGH>,
+						     <ICU_GRP_NSR 47 IRQ_TYPE_LEVEL_HIGH>,
+						     <ICU_GRP_NSR 51 IRQ_TYPE_LEVEL_HIGH>,
+						     <ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
+							  "tx-cpu3", "rx-shared";
 					port-id = <0>;
 					gop-port-id = <0>;
 					status = "disabled";
 				};
 
 				cps_eth1: eth1 {
-					interrupts = <ICU_GRP_NSR 40 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <ICU_GRP_NSR 40 IRQ_TYPE_LEVEL_HIGH>,
+						     <ICU_GRP_NSR 44 IRQ_TYPE_LEVEL_HIGH>,
+						     <ICU_GRP_NSR 48 IRQ_TYPE_LEVEL_HIGH>,
+						     <ICU_GRP_NSR 52 IRQ_TYPE_LEVEL_HIGH>,
+						     <ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
+							  "tx-cpu3", "rx-shared";
 					port-id = <1>;
 					gop-port-id = <2>;
 					status = "disabled";
 				};
 
 				cps_eth2: eth2 {
-					interrupts = <ICU_GRP_NSR 41 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <ICU_GRP_NSR 41 IRQ_TYPE_LEVEL_HIGH>,
+						     <ICU_GRP_NSR 45 IRQ_TYPE_LEVEL_HIGH>,
+						     <ICU_GRP_NSR 49 IRQ_TYPE_LEVEL_HIGH>,
+						     <ICU_GRP_NSR 53 IRQ_TYPE_LEVEL_HIGH>,
+						     <ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
+							  "tx-cpu3", "rx-shared";
 					port-id = <2>;
 					gop-port-id = <3>;
 					status = "disabled";
@@ -122,6 +134,13 @@
 				msi-parent = <&gicp>;
 			};
 
+			cps_rtc: rtc@284000 {
+				compatible = "marvell,armada-8k-rtc";
+				reg = <0x284000 0x20>, <0x284080 0x24>;
+				reg-names = "rtc", "rtc-soc";
+				interrupts = <ICU_GRP_NSR 77 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
 			cps_syscon0: system-controller@440000 {
 				compatible = "syscon", "simple-mfd";
 				reg = <0x440000 0x1000>;
@@ -138,8 +157,12 @@
 					gpio-controller;
 					#gpio-cells = <2>;
 					gpio-ranges = <&cps_pinctrl 0 0 32>;
+					interrupt-controller;
+					interrupts = <ICU_GRP_NSR 86 IRQ_TYPE_LEVEL_HIGH>,
+						     <ICU_GRP_NSR 85 IRQ_TYPE_LEVEL_HIGH>,
+						     <ICU_GRP_NSR 84 IRQ_TYPE_LEVEL_HIGH>,
+						     <ICU_GRP_NSR 83 IRQ_TYPE_LEVEL_HIGH>;
 					status = "disabled";
-
 				};
 
 				cps_gpio2: gpio@140 {
@@ -149,20 +172,16 @@
 					gpio-controller;
 					#gpio-cells = <2>;
 					gpio-ranges = <&cps_pinctrl 0 32 31>;
+					interrupt-controller;
+					interrupts = <ICU_GRP_NSR 82 IRQ_TYPE_LEVEL_HIGH>,
+						     <ICU_GRP_NSR 81 IRQ_TYPE_LEVEL_HIGH>,
+						     <ICU_GRP_NSR 80 IRQ_TYPE_LEVEL_HIGH>,
+						     <ICU_GRP_NSR 79 IRQ_TYPE_LEVEL_HIGH>;
 					status = "disabled";
 				};
 
 			};
 
-			cps_sata0: sata@540000 {
-				compatible = "marvell,armada-8k-ahci",
-					     "generic-ahci";
-				reg = <0x540000 0x30000>;
-				interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&cps_clk 1 15>;
-				status = "disabled";
-			};
-
 			cps_usb3_0: usb3@500000 {
 				compatible = "marvell,armada-8k-xhci",
 					     "generic-xhci";
@@ -183,6 +202,15 @@
 				status = "disabled";
 			};
 
+			cps_sata0: sata@540000 {
+				compatible = "marvell,armada-8k-ahci",
+					     "generic-ahci";
+				reg = <0x540000 0x30000>;
+				interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cps_clk 1 15>;
+				status = "disabled";
+			};
+
 			cps_xor0: xor@6a0000 {
 				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
 				reg = <0x6a0000 0x1000>,
@@ -241,6 +269,21 @@
 				status = "disabled";
 			};
 
+			cps_nand: nand@720000 {
+				/*
+				 * Due to the limiation of the pin available
+				 * this controller is only usable on the CPM
+				 * for A7K and on the CPS for A8K.
+				 */
+				compatible = "marvell,armada370-nand";
+				reg = <0x720000 0x54>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				interrupts = <ICU_GRP_NSR 115 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cps_clk 1 2>;
+				status = "disabled";
+			};
+
 			cps_trng: trng@760000 {
 				compatible = "marvell,armada-8k-rng", "inside-secure,safexcel-eip76";
 				reg = <0x760000 0x7d>;
diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index 015eb072ddef..151723b5c733 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -1,6 +1,8 @@
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt2712-evb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt6755-evb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt6795-evb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb
 
 always		:= $(dtb-y)
diff --git a/arch/arm64/boot/dts/mediatek/mt2712-evb.dts b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
new file mode 100644
index 000000000000..8c804df3da4e
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
@@ -0,0 +1,32 @@
+/*
+ * Copyright (c) 2017 MediaTek Inc.
+ * Author: YT Shen <yt.shen@mediatek.com>
+ *
+ * SPDX-License-Identifier: (GPL-2.0 OR MIT)
+ */
+
+/dts-v1/;
+#include "mt2712e.dtsi"
+
+/ {
+	model = "MediaTek MT2712 evaluation board";
+	compatible = "mediatek,mt2712-evb", "mediatek,mt2712";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x80000000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:921600n8";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
new file mode 100644
index 000000000000..57d0396b7faa
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
@@ -0,0 +1,171 @@
+/*
+ * Copyright (c) 2017 MediaTek Inc.
+ * Author: YT Shen <yt.shen@mediatek.com>
+ *
+ * SPDX-License-Identifier: (GPL-2.0 OR MIT)
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "mediatek,mt2712";
+	interrupt-parent = <&sysirq>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu2>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x000>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x001>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x200>;
+			enable-method = "psci";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	baud_clk: dummy26m {
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+		#clock-cells = <0>;
+	};
+
+	sys_clk: dummyclk {
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+		#clock-cells = <0>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13
+			      (GIC_CPU_MASK_RAW(0x13) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+			      (GIC_CPU_MASK_RAW(0x13) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+			      (GIC_CPU_MASK_RAW(0x13) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+			      (GIC_CPU_MASK_RAW(0x13) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	uart5: serial@1000f000 {
+		compatible = "mediatek,mt2712-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x1000f000 0 0x400>;
+		interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&baud_clk>, <&sys_clk>;
+		clock-names = "baud", "bus";
+		status = "disabled";
+	};
+
+	sysirq: interrupt-controller@10220a80 {
+		compatible = "mediatek,mt2712-sysirq",
+			     "mediatek,mt6577-sysirq";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		reg = <0 0x10220a80 0 0x40>;
+	};
+
+	gic: interrupt-controller@10510000 {
+		compatible = "arm,gic-400";
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		interrupt-controller;
+		reg = <0 0x10510000 0 0x10000>,
+		      <0 0x10520000 0 0x20000>,
+		      <0 0x10540000 0 0x20000>,
+		      <0 0x10560000 0 0x20000>;
+		interrupts = <GIC_PPI 9
+			 (GIC_CPU_MASK_RAW(0x13) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	uart0: serial@11002000 {
+		compatible = "mediatek,mt2712-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11002000 0 0x400>;
+		interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&baud_clk>, <&sys_clk>;
+		clock-names = "baud", "bus";
+		status = "disabled";
+	};
+
+	uart1: serial@11003000 {
+		compatible = "mediatek,mt2712-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11003000 0 0x400>;
+		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&baud_clk>, <&sys_clk>;
+		clock-names = "baud", "bus";
+		status = "disabled";
+	};
+
+	uart2: serial@11004000 {
+		compatible = "mediatek,mt2712-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11004000 0 0x400>;
+		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&baud_clk>, <&sys_clk>;
+		clock-names = "baud", "bus";
+		status = "disabled";
+	};
+
+	uart3: serial@11005000 {
+		compatible = "mediatek,mt2712-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11005000 0 0x400>;
+		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&baud_clk>, <&sys_clk>;
+		clock-names = "baud", "bus";
+		status = "disabled";
+	};
+
+	uart4: serial@11019000 {
+		compatible = "mediatek,mt2712-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11019000 0 0x400>;
+		interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&baud_clk>, <&sys_clk>;
+		clock-names = "baud", "bus";
+		status = "disabled";
+	};
+};
+
diff --git a/arch/arm64/boot/dts/mediatek/mt6797.dtsi b/arch/arm64/boot/dts/mediatek/mt6797.dtsi
index 31088a9f71de..4beaa71107d7 100644
--- a/arch/arm64/boot/dts/mediatek/mt6797.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt6797.dtsi
@@ -108,13 +108,6 @@
 		clock-output-names = "clk26m";
 	};
 
-	clk32k: oscillator@1 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <32000>;
-		clock-output-names = "clk32k";
-	};
-
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupt-parent = <&gic>;
@@ -147,6 +140,11 @@
 		infracfg = <&infrasys>;
 	};
 
+	watchdog: watchdog@10007000 {
+		compatible = "mediatek,mt6797-wdt", "mediatek,mt6589-wdt";
+		reg = <0 0x10007000 0 0x100>;
+	};
+
 	apmixedsys: apmixed@1000c000 {
 		compatible = "mediatek,mt6797-apmixedsys";
 		reg = <0 0x1000c000 0 0x1000>;
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
new file mode 100644
index 000000000000..c08309df2cc7
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
@@ -0,0 +1,27 @@
+/*
+ * Copyright (c) 2017 MediaTek Inc.
+ * Author: Ming Huang <ming.huang@mediatek.com>
+ *	   Sean Wang <sean.wang@mediatek.com>
+ *
+ * SPDX-License-Identifier: (GPL-2.0 OR MIT)
+ */
+
+/dts-v1/;
+#include "mt7622.dtsi"
+
+/ {
+	model = "MediaTek MT7622 RFB1 board";
+	compatible = "mediatek,mt7622-rfb1", "mediatek,mt7622";
+
+	chosen {
+		bootargs = "console=ttyS0,115200n1";
+	};
+
+	memory {
+		reg = <0 0x40000000 0 0x3F000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
new file mode 100644
index 000000000000..b111fec2ed9d
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -0,0 +1,110 @@
+/*
+ * Copyright (c) 2017 MediaTek Inc.
+ * Author: Ming Huang <ming.huang@mediatek.com>
+ *	   Sean Wang <sean.wang@mediatek.com>
+ *
+ * SPDX-License-Identifier: (GPL-2.0 OR MIT)
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "mediatek,mt7622";
+	interrupt-parent = <&sysirq>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			clock-frequency = <1300000000>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			clock-frequency = <1300000000>;
+		};
+	};
+
+	uart_clk: dummy25m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	bus_clk: dummy280m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <280000000>;
+	};
+
+	psci {
+		compatible  = "arm,psci-0.2";
+		method      = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 192 KiB reserved for ARM Trusted Firmware (BL31) */
+		secmon_reserved: secmon@43000000 {
+			reg = <0 0x43000000 0 0x30000>;
+			no-map;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
+			      IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
+			      IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) |
+			      IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) |
+			      IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	sysirq: interrupt-controller@10200620 {
+		compatible = "mediatek,mt7622-sysirq",
+			     "mediatek,mt6577-sysirq";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		reg = <0 0x10200620 0 0x20>;
+	};
+
+	gic: interrupt-controller@10300000 {
+		compatible = "arm,gic-400";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		reg = <0 0x10310000 0 0x1000>,
+		      <0 0x10320000 0 0x1000>,
+		      <0 0x10340000 0 0x2000>,
+		      <0 0x10360000 0 0x2000>;
+	};
+
+	uart0: serial@11002000 {
+		compatible = "mediatek,mt7622-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11002000 0 0x400>;
+		interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&uart_clk>, <&bus_clk>;
+		clock-names = "baud", "bus";
+		status = "disabled";
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index cc0f02d9dd02..ff81d7e5805e 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -1,5 +1,6 @@
 dtb-$(CONFIG_ARCH_QCOM)	+= apq8016-sbc.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= apq8096-db820c.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk01.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-mtp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8992-bullhead-rev-101.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8994-angler-rev-101.dtb
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi
index d94640812194..790b7775b901 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi
@@ -17,6 +17,7 @@
 			function = PMIC_GPIO_FUNC_NORMAL;
 			power-source = <PM8916_GPIO_VPH>;
 			input-disable;
+			output-high;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
index bd310ac1967a..1d63e6b879de 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
@@ -88,6 +88,8 @@
 				interrupts = <31 2>;
 
 				adi,dsi-lanes = <4>;
+				clocks = <&rpmcc RPM_SMD_BB_CLK2>;
+				clock-names = "cec";
 
 				pd-gpios = <&msmgpio 32 0>;
 
@@ -213,11 +215,14 @@
 		};
 
 		usb@78d9000 {
-			extcon = <&usb_id>, <&usb_id>;
+			extcon = <&usb_id>;
 			status = "okay";
 			adp-disable;
 			hnp-disable;
 			srp-disable;
+			dr_mode = "host";
+			pinctrl-names = "default";
+			pinctrl-0 = <&usb_sw_sel_pm>;
 			ulpi {
 				phy {
 					v1p8-supply = <&pm8916_l7>;
@@ -337,19 +342,11 @@
 
 	usb_id: usb-id {
 		compatible = "linux,extcon-usb-gpio";
-		id-gpio = <&msmgpio 121 GPIO_ACTIVE_HIGH>;
+		vbus-gpio = <&msmgpio 121 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&usb_id_default>;
 	};
 
-	usb-switch {
-		compatible = "toshiba,tc7usb40mu";
-		switch-gpios = <&pm8916_gpios 4 GPIO_ACTIVE_HIGH>;
-		extcon = <&usb_id>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&usb_sw_sel_pm>;
-	};
-
 	hdmi-out {
 		compatible = "hdmi-connector";
 		type = "a";
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi
index b1142c45fdc9..8e379782597a 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi
@@ -24,4 +24,28 @@
 			power-source = <PM8994_GPIO_S4>; // 1.8V
 		};
 	};
+
+	usb3_vbus_det_gpio: pm8996_gpio22 {
+		pinconf {
+			pins = "gpio22";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			input-enable;
+			bias-pull-down;
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+			power-source = <PM8994_GPIO_S4>; // 1.8V
+		};
+	};
+};
+
+&pmi8994_gpios {
+	usb2_vbus_det_gpio: pmi8996_gpio6 {
+		pinconf {
+			pins = "gpio6";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			input-enable;
+			bias-pull-down;
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+			power-source = <PM8994_GPIO_S4>; // 1.8V
+		};
+	};
 };
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
index d2196fc6d739..789f3e87321e 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
@@ -13,6 +13,7 @@
 
 #include "msm8996.dtsi"
 #include "pm8994.dtsi"
+#include "pmi8994.dtsi"
 #include "apq8096-db820c-pins.dtsi"
 #include "apq8096-db820c-pmic-pins.dtsi"
 #include <dt-bindings/input/input.h>
@@ -88,6 +89,55 @@
 			cd-gpios = <&msmgpio 38 0x1>;
 			status = "okay";
 		};
+
+		phy@34000 {
+			status = "okay";
+		};
+
+		phy@7410000 {
+			status = "okay";
+		};
+
+		phy@7411000 {
+			status = "okay";
+		};
+
+		phy@7412000 {
+			status = "okay";
+		};
+
+		usb@6a00000 {
+			status = "okay";
+
+			dwc3@6a00000 {
+				extcon = <&usb3_id>;
+				dr_mode = "otg";
+			};
+		};
+
+		usb3_id: usb3-id {
+			compatible = "linux,extcon-usb-gpio";
+			id-gpio = <&pm8994_gpios 22 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&usb3_vbus_det_gpio>;
+		};
+
+		usb@7600000 {
+			status = "okay";
+
+			dwc3@7600000 {
+				extcon = <&usb2_id>;
+				dr_mode = "otg";
+				maximum-speed = "high-speed";
+			};
+		};
+
+		usb2_id: usb2-id {
+			compatible = "linux,extcon-usb-gpio";
+			id-gpio = <&pmi8994_gpios 6 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&usb2_vbus_det_gpio>;
+		};
 	};
 
 
@@ -106,4 +156,152 @@
 			gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>;
 		};
 	};
+
+	rpm-glink {
+		rpm_requests {
+			pm8994-regulators {
+				vdd_l1-supply = <&pm8994_s3>;
+				vdd_l2_l26_l28-supply = <&pm8994_s3>;
+				vdd_l3_l11-supply = <&pm8994_s3>;
+				vdd_l4_l27_l31-supply = <&pm8994_s3>;
+				vdd_l5_l7-supply = <&pm8994_s5>;
+				vdd_l14_l15-supply = <&pm8994_s5>;
+				vdd_l20_l21-supply = <&pm8994_s5>;
+				vdd_l25-supply = <&pm8994_s3>;
+
+				s3 {
+					regulator-min-microvolt = <1300000>;
+					regulator-max-microvolt = <1300000>;
+				};
+				s4 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+				s5 {
+					regulator-min-microvolt = <2150000>;
+					regulator-max-microvolt = <2150000>;
+				};
+				s7 {
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <800000>;
+				};
+
+				l1 {
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+				};
+				l2 {
+					regulator-min-microvolt = <1250000>;
+					regulator-max-microvolt = <1250000>;
+				};
+				l3 {
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <850000>;
+				};
+				l4 {
+					regulator-min-microvolt = <1225000>;
+					regulator-max-microvolt = <1225000>;
+				};
+				l6 {
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+				l8 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+				l9 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+				l10 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+				l11 {
+					regulator-min-microvolt = <1150000>;
+					regulator-max-microvolt = <1150000>;
+				};
+				l12 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+				l13 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <2950000>;
+				};
+				l14 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+				l15 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+				l16 {
+					regulator-min-microvolt = <2700000>;
+					regulator-max-microvolt = <2700000>;
+				};
+				l17 {
+					regulator-min-microvolt = <2500000>;
+					regulator-max-microvolt = <2500000>;
+				};
+				l18 {
+					regulator-min-microvolt = <2700000>;
+					regulator-max-microvolt = <2900000>;
+				};
+				l19 {
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+				};
+				l20 {
+					regulator-min-microvolt = <2950000>;
+					regulator-max-microvolt = <2950000>;
+					regulator-allow-set-load;
+				};
+				l21 {
+					regulator-min-microvolt = <2950000>;
+					regulator-max-microvolt = <2950000>;
+				};
+				l22 {
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+				l23 {
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+				l24 {
+					regulator-min-microvolt = <3075000>;
+					regulator-max-microvolt = <3075000>;
+				};
+				l25 {
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-allow-set-load;
+				};
+				l27 {
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+				};
+				l28 {
+					regulator-min-microvolt = <925000>;
+					regulator-max-microvolt = <925000>;
+					regulator-allow-set-load;
+				};
+				l29 {
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+				l30 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+				l32 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+			};
+		};
+	};
 };
diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
new file mode 100644
index 000000000000..6a838b5d321e
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
@@ -0,0 +1,52 @@
+/dts-v1/;
+/* Copyright (c) 2017, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include "ipq8074.dtsi"
+
+/ {
+	#address-cells = <0x2>;
+	#size-cells = <0x2>;
+	model = "Qualcomm Technologies, Inc. IPQ8074-HK01";
+	compatible = "qcom,ipq8074-hk01", "qcom,ipq8074";
+	interrupt-parent = <&intc>;
+
+	aliases {
+		serial0 = &blsp1_uart5;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0x0 0x20000000>;
+	};
+
+	soc {
+		pinctrl@1000000 {
+			serial_4_pins: serial4_pinmux {
+				mux {
+					pins = "gpio23", "gpio24";
+					function = "blsp4_uart1";
+					bias-disable;
+				};
+			};
+		};
+
+		serial@78b3000 {
+			pinctrl-0 = <&serial_4_pins>;
+			pinctrl-names = "default";
+			status = "ok";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
new file mode 100644
index 000000000000..2bc5dec5614d
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -0,0 +1,194 @@
+/*
+ * Copyright (c) 2017, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-ipq8074.h>
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ8074";
+	compatible = "qcom,ipq8074";
+
+	soc: soc {
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+		ranges = <0 0 0 0xffffffff>;
+		compatible = "simple-bus";
+
+		pinctrl@1000000 {
+			compatible = "qcom,ipq8074-pinctrl";
+			reg = <0x1000000 0x300000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <0x2>;
+			interrupt-controller;
+			#interrupt-cells = <0x2>;
+		};
+
+		intc: interrupt-controller@b000000 {
+			compatible = "qcom,msm-qgic2";
+			interrupt-controller;
+			#interrupt-cells = <0x3>;
+			reg = <0xb000000 0x1000>, <0xb002000 0x1000>;
+		};
+
+		timer {
+			compatible = "arm,armv8-timer";
+			interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		};
+
+		timer@b120000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			compatible = "arm,armv7-timer-mem";
+			reg = <0xb120000 0x1000>;
+			clock-frequency = <19200000>;
+
+			frame@b120000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xb121000 0x1000>,
+				      <0xb122000 0x1000>;
+			};
+
+			frame@b123000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xb123000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b124000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xb124000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b125000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xb125000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b126000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xb126000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b127000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xb127000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b128000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xb128000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		gcc: gcc@1800000 {
+			compatible = "qcom,gcc-ipq8074";
+			reg = <0x1800000 0x80000>;
+			#clock-cells = <0x1>;
+			#reset-cells = <0x1>;
+		};
+
+		blsp1_uart5: serial@78b3000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x78b3000 0x200>;
+			interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART5_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+	};
+
+	cpus {
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			enable-method = "psci";
+			reg = <0x1>;
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			enable-method = "psci";
+			reg = <0x2>;
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			enable-method = "psci";
+			reg = <0x3>;
+			next-level-cache = <&L2_0>;
+		};
+
+		L2_0: l2-cache {
+			compatible = "cache";
+			cache-level = <0x2>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 GIC_CPU_MASK_SIMPLE(4)>;
+	};
+
+	clocks {
+		sleep_clk: sleep_clk {
+			compatible = "fixed-clock";
+			clock-frequency = <32000>;
+			#clock-cells = <0>;
+		};
+
+		xo: xo {
+			compatible = "fixed-clock";
+			clock-frequency = <19200000>;
+			#clock-cells = <0>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 039991f80831..dc3817593e14 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -88,6 +88,11 @@
 			no-map;
 		};
 
+		venus_mem: venus@89900000 {
+			reg = <0x0 0x89900000 0x0 0x600000>;
+			no-map;
+		};
+
 		mba_mem: mba@8ea00000 {
 			no-map;
 			reg = <0 0x8ea00000 0 0x100000>;
@@ -204,6 +209,17 @@
 
 	};
 
+	gpu_opp_table: opp_table {
+		compatible = "operating-points-v2";
+
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+		};
+		opp-19200000 {
+			opp-hz = /bits/ 64 <19200000>;
+		};
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
@@ -694,6 +710,84 @@
 			#thermal-sensor-cells = <1>;
 		};
 
+		apps_iommu: iommu@1ef0000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			#iommu-cells = <1>;
+			compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1";
+			ranges = <0 0x1e20000 0x40000>;
+			reg = <0x1ef0000 0x3000>;
+			clocks = <&gcc GCC_SMMU_CFG_CLK>,
+				 <&gcc GCC_APSS_TCU_CLK>;
+			clock-names = "iface", "bus";
+			qcom,iommu-secure-id = <17>;
+
+			// mdp_0:
+			iommu-ctx@4000 {
+				compatible = "qcom,msm-iommu-v1-ns";
+				reg = <0x4000 0x1000>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			// venus_ns:
+			iommu-ctx@5000 {
+				compatible = "qcom,msm-iommu-v1-sec";
+				reg = <0x5000 0x1000>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		gpu_iommu: iommu@1f08000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			#iommu-cells = <1>;
+			compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1";
+			ranges = <0 0x1f08000 0x10000>;
+			clocks = <&gcc GCC_SMMU_CFG_CLK>,
+				 <&gcc GCC_GFX_TCU_CLK>;
+			clock-names = "iface", "bus";
+			qcom,iommu-secure-id = <18>;
+
+			// gfx3d_user:
+			iommu-ctx@1000 {
+				compatible = "qcom,msm-iommu-v1-ns";
+				reg = <0x1000 0x1000>;
+				interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			// gfx3d_priv:
+			iommu-ctx@2000 {
+				compatible = "qcom,msm-iommu-v1-ns";
+				reg = <0x2000 0x1000>;
+				interrupts = <GIC_SPI 242 0>;
+			};
+		};
+
+		gpu@1c00000 {
+			compatible = "qcom,adreno-306.0", "qcom,adreno";
+			reg = <0x01c00000 0x20000>;
+			reg-names = "kgsl_3d0_reg_memory";
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "kgsl_3d0_irq";
+			clock-names =
+			    "core",
+			    "iface",
+			    "mem",
+			    "mem_iface",
+			    "alt_mem_iface",
+			    "gfx3d";
+			clocks =
+			    <&gcc GCC_OXILI_GFX3D_CLK>,
+			    <&gcc GCC_OXILI_AHB_CLK>,
+			    <&gcc GCC_OXILI_GMEM_CLK>,
+			    <&gcc GCC_BIMC_GFX_CLK>,
+			    <&gcc GCC_BIMC_GPU_CLK>,
+			    <&gcc GFX3D_CLK_SRC>;
+			power-domains = <&gcc OXILI_GDSC>;
+			operating-points-v2 = <&gpu_opp_table>;
+			iommus = <&gpu_iommu 1>, <&gpu_iommu 2>;
+		};
+
 		mdss: mdss@1a00000 {
 			compatible = "qcom,mdss";
 			reg = <0x1a00000 0x1000>,
@@ -735,6 +829,8 @@
 					      "core_clk",
 					      "vsync_clk";
 
+				iommus = <&apps_iommu 4>;
+
 				ports {
 					#address-cells = <1>;
 					#size-cells = <0>;
@@ -990,7 +1086,7 @@
 		};
 
 		replicator@824000 {
-			compatible = "qcom,coresight-replicator1x", "arm,primecell";
+			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
 			reg = <0x824000 0x1000>;
 
 			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
@@ -1207,6 +1303,28 @@
 				};
 			};
 		};
+
+		venus: video-codec@1d00000 {
+			compatible = "qcom,msm8916-venus";
+			reg = <0x01d00000 0xff000>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&gcc VENUS_GDSC>;
+			clocks = <&gcc GCC_VENUS0_VCODEC0_CLK>,
+				 <&gcc GCC_VENUS0_AHB_CLK>,
+				 <&gcc GCC_VENUS0_AXI_CLK>;
+			clock-names = "core", "iface", "bus";
+			iommus = <&apps_iommu 5>;
+			memory-region = <&venus_mem>;
+			status = "okay";
+
+			video-decoder {
+				compatible = "venus-decoder";
+			};
+
+			video-encoder {
+				compatible = "venus-encoder";
+			};
+		};
 	};
 
 	smd {
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 8f085716e258..887b61c872dd 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -276,12 +276,83 @@
 		hwlocks = <&tcsr_mutex 3>;
 	};
 
+	rpm-glink {
+		compatible = "qcom,glink-rpm";
+
+		interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+
+		qcom,rpm-msg-ram = <&rpm_msg_ram>;
+
+		mboxes = <&apcs_glb 0>;
+
+		rpm_requests {
+			compatible = "qcom,rpm-msm8996";
+			qcom,glink-channels = "rpm_requests";
+
+			pm8994-regulators {
+				compatible = "qcom,rpm-pm8994-regulators";
+
+				pm8994_s1: s1 {};
+				pm8994_s2: s2 {};
+				pm8994_s3: s3 {};
+				pm8994_s4: s4 {};
+				pm8994_s5: s5 {};
+				pm8994_s6: s6 {};
+				pm8994_s7: s7 {};
+				pm8994_s8: s8 {};
+				pm8994_s9: s9 {};
+				pm8994_s10: s10 {};
+				pm8994_s11: s11 {};
+				pm8994_s12: s12 {};
+
+				pm8994_l1: l1 {};
+				pm8994_l2: l2 {};
+				pm8994_l3: l3 {};
+				pm8994_l4: l4 {};
+				pm8994_l5: l5 {};
+				pm8994_l6: l6 {};
+				pm8994_l7: l7 {};
+				pm8994_l8: l8 {};
+				pm8994_l9: l9 {};
+				pm8994_l10: l10 {};
+				pm8994_l11: l11 {};
+				pm8994_l12: l12 {};
+				pm8994_l13: l13 {};
+				pm8994_l14: l14 {};
+				pm8994_l15: l15 {};
+				pm8994_l16: l16 {};
+				pm8994_l17: l17 {};
+				pm8994_l18: l18 {};
+				pm8994_l19: l19 {};
+				pm8994_l20: l20 {};
+				pm8994_l21: l21 {};
+				pm8994_l22: l22 {};
+				pm8994_l23: l23 {};
+				pm8994_l24: l24 {};
+				pm8994_l25: l25 {};
+				pm8994_l26: l26 {};
+				pm8994_l27: l27 {};
+				pm8994_l28: l28 {};
+				pm8994_l29: l29 {};
+				pm8994_l30: l30 {};
+				pm8994_l31: l31 {};
+				pm8994_l32: l32 {};
+			};
+
+		};
+	};
+
 	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0 0 0xffffffff>;
 		compatible = "simple-bus";
 
+		rpm_msg_ram: memory@68000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0x68000 0x6000>;
+		};
+
 		tcsr_mutex_regs: syscon@740000 {
 			compatible = "syscon";
 			reg = <0x740000 0x20000>;
@@ -303,6 +374,13 @@
 			reg = <0x9820000 0x1000>;
 		};
 
+		apcs_glb: mailbox@9820000 {
+			compatible = "qcom,msm8996-apcs-hmss-global";
+			reg = <0x9820000 0x1000>;
+
+			#mbox-cells = <1>;
+		};
+
 		gcc: clock-controller@300000 {
 			compatible = "qcom,gcc-msm8996";
 			#clock-cells = <1>;
@@ -538,6 +616,209 @@
 					       <960000000>,
 					       <825000000>;
 		};
+
+		qfprom@74000 {
+			compatible = "qcom,qfprom";
+			reg = <0x74000 0x8ff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			qusb2p_hstx_trim: hstx_trim@24e {
+				reg = <0x24e 0x2>;
+				bits = <5 4>;
+			};
+
+			qusb2s_hstx_trim: hstx_trim@24f {
+				reg = <0x24f 0x1>;
+				bits = <1 4>;
+			};
+		};
+
+		phy@34000 {
+			compatible = "qcom,msm8996-qmp-pcie-phy";
+			reg = <0x34000 0x488>;
+			#clock-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
+				<&gcc GCC_PCIE_PHY_CFG_AHB_CLK>,
+				<&gcc GCC_PCIE_CLKREF_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref";
+
+			vdda-phy-supply = <&pm8994_l28>;
+			vdda-pll-supply = <&pm8994_l12>;
+
+			resets = <&gcc GCC_PCIE_PHY_BCR>,
+				<&gcc GCC_PCIE_PHY_COM_BCR>,
+				<&gcc GCC_PCIE_PHY_COM_NOCSR_BCR>;
+			reset-names = "phy", "common", "cfg";
+			status = "disabled";
+
+			pciephy_0: lane@35000 {
+				reg = <0x035000 0x130>,
+					<0x035200 0x200>,
+					<0x035400 0x1dc>;
+				#phy-cells = <0>;
+
+				clock-output-names = "pcie_0_pipe_clk_src";
+				clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
+				clock-names = "pipe0";
+				resets = <&gcc GCC_PCIE_0_PHY_BCR>;
+				reset-names = "lane0";
+			};
+
+			pciephy_1: lane@36000 {
+				reg = <0x036000 0x130>,
+					<0x036200 0x200>,
+					<0x036400 0x1dc>;
+				#phy-cells = <0>;
+
+				clock-output-names = "pcie_1_pipe_clk_src";
+				clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
+				clock-names = "pipe1";
+				resets = <&gcc GCC_PCIE_1_PHY_BCR>;
+				reset-names = "lane1";
+			};
+
+			pciephy_2: lane@37000 {
+				reg = <0x037000 0x130>,
+					<0x037200 0x200>,
+					<0x037400 0x1dc>;
+				#phy-cells = <0>;
+
+				clock-output-names = "pcie_2_pipe_clk_src";
+				clocks = <&gcc GCC_PCIE_2_PIPE_CLK>;
+				clock-names = "pipe2";
+				resets = <&gcc GCC_PCIE_2_PHY_BCR>;
+				reset-names = "lane2";
+			};
+		};
+
+		phy@7410000 {
+			compatible = "qcom,msm8996-qmp-usb3-phy";
+			reg = <0x7410000 0x1c4>;
+			#clock-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
+				<&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+				<&gcc GCC_USB3_CLKREF_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref";
+
+			vdda-phy-supply = <&pm8994_l28>;
+			vdda-pll-supply = <&pm8994_l12>;
+
+			resets = <&gcc GCC_USB3_PHY_BCR>,
+				<&gcc GCC_USB3PHY_PHY_BCR>;
+			reset-names = "phy", "common";
+			status = "disabled";
+
+			ssusb_phy_0: lane@7410200 {
+				reg = <0x7410200 0x200>,
+					<0x7410400 0x130>,
+					<0x7410600 0x1a8>;
+				#phy-cells = <0>;
+
+				clock-output-names = "usb3_phy_pipe_clk_src";
+				clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
+				clock-names = "pipe0";
+			};
+		};
+
+		hsusb_phy1: phy@7411000 {
+			compatible = "qcom,msm8996-qusb2-phy";
+			reg = <0x7411000 0x180>;
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+				<&gcc GCC_RX1_USB2_CLKREF_CLK>;
+			clock-names = "cfg_ahb", "ref";
+
+			vdda-pll-supply = <&pm8994_l12>;
+			vdda-phy-dpdm-supply = <&pm8994_l24>;
+
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+			nvmem-cells = <&qusb2p_hstx_trim>;
+			status = "disabled";
+		};
+
+		hsusb_phy2: phy@7412000 {
+			compatible = "qcom,msm8996-qusb2-phy";
+			reg = <0x7412000 0x180>;
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+				<&gcc GCC_RX2_USB2_CLKREF_CLK>;
+			clock-names = "cfg_ahb", "ref";
+
+			vdda-pll-supply = <&pm8994_l12>;
+			vdda-phy-dpdm-supply = <&pm8994_l24>;
+
+			resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
+			nvmem-cells = <&qusb2s_hstx_trim>;
+			status = "disabled";
+		};
+
+		usb2: usb@7600000 {
+			compatible = "qcom,dwc3";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_PERIPH_NOC_USB20_AHB_CLK>,
+				<&gcc GCC_USB20_MASTER_CLK>,
+				<&gcc GCC_USB20_MOCK_UTMI_CLK>,
+				<&gcc GCC_USB20_SLEEP_CLK>,
+				<&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>;
+
+			assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB20_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <60000000>;
+
+			power-domains = <&gcc USB30_GDSC>;
+			status = "disabled";
+
+			dwc3@7600000 {
+				compatible = "snps,dwc3";
+				reg = <0x7600000 0xcc00>;
+				interrupts = <0 138 0>;
+				phys = <&hsusb_phy2>;
+				phy-names = "usb2-phy";
+			};
+		};
+
+		usb3: usb@6a00000 {
+			compatible = "qcom,dwc3";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_SYS_NOC_USB3_AXI_CLK>,
+				<&gcc GCC_USB30_MASTER_CLK>,
+				<&gcc GCC_AGGRE2_USB3_AXI_CLK>,
+				<&gcc GCC_USB30_MOCK_UTMI_CLK>,
+				<&gcc GCC_USB30_SLEEP_CLK>,
+				<&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>;
+
+			assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <120000000>;
+
+			power-domains = <&gcc USB30_GDSC>;
+			status = "disabled";
+
+			dwc3@6a00000 {
+				compatible = "snps,dwc3";
+				reg = <0x6a00000 0xcc00>;
+				interrupts = <0 131 0>;
+				phys = <&hsusb_phy1>, <&ssusb_phy_0>;
+				phy-names = "usb2-phy", "usb3-phy";
+			};
+		};
 	};
 
 	adsp-pil {
@@ -558,6 +839,15 @@
 
 		qcom,smem-states = <&adsp_smp2p_out 0>;
 		qcom,smem-state-names = "stop";
+
+		smd-edge {
+			interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
+
+			label = "lpass";
+			qcom,ipc = <&apcs 16 8>;
+			qcom,smd-edge = <1>;
+			qcom,remote-pid = <2>;
+		};
 	};
 
 	adsp-smp2p {
@@ -584,6 +874,30 @@
 		};
 	};
 
+	modem-smp2p {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+
+		interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>;
+
+		qcom,ipc = <&apcs 16 14>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		modem_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
 	smp2p-slpi {
 		compatible = "qcom,smp2p";
 		qcom,smem = <481>, <430>;
diff --git a/arch/arm64/boot/dts/qcom/pmi8994.dtsi b/arch/arm64/boot/dts/qcom/pmi8994.dtsi
index d3879a4e8076..57673f92805d 100644
--- a/arch/arm64/boot/dts/qcom/pmi8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmi8994.dtsi
@@ -8,6 +8,23 @@
 		reg = <0x2 SPMI_USID>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+
+		pmi8994_gpios: gpios@c000 {
+			compatible = "qcom,pmi8994-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <2 0xc0 0 IRQ_TYPE_NONE>,
+				     <2 0xc1 0 IRQ_TYPE_NONE>,
+				     <2 0xc2 0 IRQ_TYPE_NONE>,
+				     <2 0xc3 0 IRQ_TYPE_NONE>,
+				     <2 0xc4 0 IRQ_TYPE_NONE>,
+				     <2 0xc5 0 IRQ_TYPE_NONE>,
+				     <2 0xc6 0 IRQ_TYPE_NONE>,
+				     <2 0xc7 0 IRQ_TYPE_NONE>,
+				     <2 0xc8 0 IRQ_TYPE_NONE>,
+				     <2 0xc9 0 IRQ_TYPE_NONE>;
+		};
 	};
 
 	pmic@3 {
diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index acc4bb30d485..381928bc1358 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -2,6 +2,7 @@ dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-x.dtb r8a7795-h3ulcb.dtb
 dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-xs.dtb
 dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-salvator-x.dtb r8a7795-es1-h3ulcb.dtb
 dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-x.dtb r8a7796-m3ulcb.dtb
+dtb-$(CONFIG_ARCH_R8A77995) += r8a77995-draak.dtb
 
 always		:= $(dtb-y)
 clean-files	:= *.dtb
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dts
index 95fe207cb6a3..dd4f9b6a4254 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dts
@@ -9,8 +9,6 @@
  * kind, whether express or implied.
  */
 
-#define CPG_AUDIO_CLK_I		R8A7795_CLK_S0D4
-
 /dts-v1/;
 #include "r8a7795-es1.dtsi"
 #include "ulcb.dtsi"
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts
index b84c156ed696..3f7d5f51e428 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts
@@ -8,8 +8,6 @@
  * kind, whether express or implied.
  */
 
-#define CPG_AUDIO_CLK_I		R8A7795_CLK_S0D4
-
 /dts-v1/;
 #include "r8a7795-es1.dtsi"
 #include "salvator-x.dtsi"
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi b/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi
index a0ba7bd21ea3..aaa5e67a963e 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi
@@ -21,6 +21,14 @@
 		status = "disabled";
 	};
 
+	/delete-node/ usb-phy@ee0e0200;
+	/delete-node/ usb@ee0e0100;
+	/delete-node/ usb@ee0e0000;
+	/delete-node/ usb@e659c000;
+
+	/delete-node/ dma-controller@e6460000;
+	/delete-node/ dma-controller@e6470000;
+
 	fcpf2: fcp@fe952000 {
 		compatible = "renesas,fcpf";
 		reg = <0 0xfe952000 0 0x200>;
@@ -79,6 +87,5 @@
 };
 
 &du {
-	compatible = "renesas,du-r8a7795";
 	vsps = <&vspd0 &vspd1 &vspd2 &vspd3>;
 };
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
index 0426f41765f0..0afe777973de 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
@@ -9,8 +9,6 @@
  * kind, whether express or implied.
  */
 
-#define CPG_AUDIO_CLK_I		R8A7795_CLK_S0D4
-
 /dts-v1/;
 #include "r8a7795.dtsi"
 #include "ulcb.dtsi"
@@ -40,3 +38,17 @@
 		reg = <0x7 0x00000000 0x0 0x40000000>;
 	};
 };
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 722>,
+		 <&cpg CPG_MOD 721>,
+		 <&cpg CPG_MOD 727>,
+		 <&versaclock5 1>,
+		 <&versaclock5 3>,
+		 <&versaclock5 4>,
+		 <&versaclock5 2>;
+	clock-names = "du.0", "du.1", "du.2", "du.3", "lvds.0",
+		      "dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
index 684fb3b9d154..17953070f38d 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
@@ -8,8 +8,6 @@
  * kind, whether express or implied.
  */
 
-#define CPG_AUDIO_CLK_I		R8A7795_CLK_S0D4
-
 /dts-v1/;
 #include "r8a7795.dtsi"
 #include "salvator-x.dtsi"
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts
index de354957144b..7675de5d4f2c 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts
@@ -8,8 +8,6 @@
  * kind, whether express or implied.
  */
 
-#define CPG_AUDIO_CLK_I		R8A7795_CLK_S0D4
-
 /dts-v1/;
 #include "r8a7795.dtsi"
 #include "salvator-xs.dtsi"
@@ -46,10 +44,12 @@
 		 <&cpg CPG_MOD 722>,
 		 <&cpg CPG_MOD 721>,
 		 <&cpg CPG_MOD 727>,
+		 <&versaclock6 1>,
 		 <&x21_clk>,
-		 <&x22_clk>;
+		 <&x22_clk>,
+		 <&versaclock6 2>;
 	clock-names = "du.0", "du.1", "du.2", "du.3", "lvds.0",
-		      "dclkin.1", "dclkin.2";
+		      "dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3";
 };
 
 &ehci2 {
diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
index e31c1b660b3f..2938195b9571 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
@@ -12,6 +12,8 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/power/r8a7795-sysc.h>
 
+#define CPG_AUDIO_CLK_I		R8A7795_CLK_S0D4
+
 / {
 	compatible = "renesas,r8a7795";
 	#address-cells = <2>;
@@ -691,6 +693,126 @@
 			};
 		};
 
+		drif00: rif@e6f40000 {
+			compatible = "renesas,r8a7795-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6f40000 0 0x64>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 515>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x20>, <&dmac2 0x20>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 515>;
+			renesas,bonding = <&drif01>;
+			status = "disabled";
+		};
+
+		drif01: rif@e6f50000 {
+			compatible = "renesas,r8a7795-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6f50000 0 0x64>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 514>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x22>, <&dmac2 0x22>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 514>;
+			renesas,bonding = <&drif00>;
+			status = "disabled";
+		};
+
+		drif10: rif@e6f60000 {
+			compatible = "renesas,r8a7795-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6f60000 0 0x64>;
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 513>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x24>, <&dmac2 0x24>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 513>;
+			renesas,bonding = <&drif11>;
+			status = "disabled";
+		};
+
+		drif11: rif@e6f70000 {
+			compatible = "renesas,r8a7795-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6f70000 0 0x64>;
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 512>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x26>, <&dmac2 0x26>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 512>;
+			renesas,bonding = <&drif10>;
+			status = "disabled";
+		};
+
+		drif20: rif@e6f80000 {
+			compatible = "renesas,r8a7795-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6f80000 0 0x64>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 511>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x28>, <&dmac2 0x28>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 511>;
+			renesas,bonding = <&drif21>;
+			status = "disabled";
+		};
+
+		drif21: rif@e6f90000 {
+			compatible = "renesas,r8a7795-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6f90000 0 0x64>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 510>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x2a>, <&dmac2 0x2a>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 510>;
+			renesas,bonding = <&drif20>;
+			status = "disabled";
+		};
+
+		drif30: rif@e6fa0000 {
+			compatible = "renesas,r8a7795-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6fa0000 0 0x64>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 509>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x2c>, <&dmac2 0x2c>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 509>;
+			renesas,bonding = <&drif31>;
+			status = "disabled";
+		};
+
+		drif31: rif@e6fb0000 {
+			compatible = "renesas,r8a7795-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6fb0000 0 0x64>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 508>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x2e>, <&dmac2 0x2e>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 508>;
+			renesas,bonding = <&drif30>;
+			status = "disabled";
+		};
+
 		hscif0: serial@e6540000 {
 			compatible = "renesas,hscif-r8a7795",
 				     "renesas,rcar-gen3-hscif",
@@ -776,6 +898,68 @@
 			status = "disabled";
 		};
 
+		msiof0: spi@e6e90000 {
+			compatible = "renesas,msiof-r8a7795",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6e90000 0 0x0064>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 211>;
+			dmas = <&dmac1 0x41>, <&dmac1 0x40>,
+			       <&dmac2 0x41>, <&dmac2 0x40>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 211>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof1: spi@e6ea0000 {
+			compatible = "renesas,msiof-r8a7795",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6ea0000 0 0x0064>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 210>;
+			dmas = <&dmac1 0x43>, <&dmac1 0x42>,
+			       <&dmac2 0x43>, <&dmac2 0x42>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 210>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof2: spi@e6c00000 {
+			compatible = "renesas,msiof-r8a7795",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c00000 0 0x0064>;
+			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 209>;
+			dmas = <&dmac0 0x45>, <&dmac0 0x44>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 209>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof3: spi@e6c10000 {
+			compatible = "renesas,msiof-r8a7795",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c10000 0 0x0064>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 208>;
+			dmas = <&dmac0 0x47>, <&dmac0 0x46>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 208>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		scif0: serial@e6e60000 {
 			compatible = "renesas,scif-r8a7795",
 				     "renesas,rcar-gen3-scif", "renesas,scif";
@@ -1267,7 +1451,8 @@
 		};
 
 		sata: sata@ee300000 {
-			compatible = "renesas,sata-r8a7795";
+			compatible = "renesas,sata-r8a7795",
+				     "renesas,rcar-gen3-sata";
 			reg = <0 0xee300000 0 0x200000>;
 			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 815>;
@@ -1314,6 +1499,34 @@
 			dma-channels = <2>;
 		};
 
+		usb_dmac2: dma-controller@e6460000 {
+			compatible = "renesas,r8a7795-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe6460000 0 0x100>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 326>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 326>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb_dmac3: dma-controller@e6470000 {
+			compatible = "renesas,r8a7795-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe6470000 0 0x100>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 329>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 329>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
 		sdhi0: sd@ee100000 {
 			compatible = "renesas,sdhi-r8a7795";
 			reg = <0 0xee100000 0 0x2000>;
@@ -1392,6 +1605,18 @@
 			status = "disabled";
 		};
 
+		usb2_phy3: usb-phy@ee0e0200 {
+			compatible = "renesas,usb2-phy-r8a7795",
+				     "renesas,rcar-gen3-usb2-phy";
+			reg = <0 0xee0e0200 0 0x700>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 700>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 700>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
 		ehci0: usb@ee080100 {
 			compatible = "generic-ehci";
 			reg = <0 0xee080100 0 0x100>;
@@ -1399,6 +1624,7 @@
 			clocks = <&cpg CPG_MOD 703>;
 			phys = <&usb2_phy0>;
 			phy-names = "usb";
+			companion = <&ohci0>;
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
 			resets = <&cpg 703>;
 			status = "disabled";
@@ -1411,6 +1637,7 @@
 			clocks = <&cpg CPG_MOD 702>;
 			phys = <&usb2_phy1>;
 			phy-names = "usb";
+			companion = <&ohci1>;
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
 			resets = <&cpg 702>;
 			status = "disabled";
@@ -1423,11 +1650,25 @@
 			clocks = <&cpg CPG_MOD 701>;
 			phys = <&usb2_phy2>;
 			phy-names = "usb";
+			companion = <&ohci2>;
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
 			resets = <&cpg 701>;
 			status = "disabled";
 		};
 
+		ehci3: usb@ee0e0100 {
+			compatible = "generic-ehci";
+			reg = <0 0xee0e0100 0 0x100>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 700>;
+			phys = <&usb2_phy3>;
+			phy-names = "usb";
+			companion = <&ohci3>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 700>;
+			status = "disabled";
+		};
+
 		ohci0: usb@ee080000 {
 			compatible = "generic-ohci";
 			reg = <0 0xee080000 0 0x100>;
@@ -1464,6 +1705,18 @@
 			status = "disabled";
 		};
 
+		ohci3: usb@ee0e0000 {
+			compatible = "generic-ohci";
+			reg = <0 0xee0e0000 0 0x100>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 700>;
+			phys = <&usb2_phy3>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 700>;
+			status = "disabled";
+		};
+
 		hsusb: usb@e6590000 {
 			compatible = "renesas,usbhs-r8a7795",
 				     "renesas,rcar-gen3-usbhs";
@@ -1481,6 +1734,23 @@
 			status = "disabled";
 		};
 
+		hsusb3: usb@e659c000 {
+			compatible = "renesas,usbhs-r8a7795",
+				     "renesas,rcar-gen3-usbhs";
+			reg = <0 0xe659c000 0 0x100>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 705>;
+			dmas = <&usb_dmac2 0>, <&usb_dmac2 1>,
+			       <&usb_dmac3 0>, <&usb_dmac3 1>;
+			dma-names = "ch0", "ch1", "ch2", "ch3";
+			renesas,buswait = <11>;
+			phys = <&usb2_phy3>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 705>;
+			status = "disabled";
+		};
+
 		pciec0: pcie@fe000000 {
 			compatible = "renesas,pcie-r8a7795",
 				     "renesas,pcie-rcar-gen3";
@@ -1535,6 +1805,46 @@
 			status = "disabled";
 		};
 
+		imr-lx4@fe860000 {
+			compatible = "renesas,r8a7795-imr-lx4",
+				     "renesas,imr-lx4";
+			reg = <0 0xfe860000 0 0x2000>;
+			interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 823>;
+			power-domains = <&sysc R8A7795_PD_A3VC>;
+			resets = <&cpg 823>;
+		};
+
+		imr-lx4@fe870000 {
+			compatible = "renesas,r8a7795-imr-lx4",
+				     "renesas,imr-lx4";
+			reg = <0 0xfe870000 0 0x2000>;
+			interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 822>;
+			power-domains = <&sysc R8A7795_PD_A3VC>;
+			resets = <&cpg 822>;
+		};
+
+		imr-lx4@fe880000 {
+			compatible = "renesas,r8a7795-imr-lx4",
+				     "renesas,imr-lx4";
+			reg = <0 0xfe880000 0 0x2000>;
+			interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 821>;
+			power-domains = <&sysc R8A7795_PD_A3VC>;
+			resets = <&cpg 821>;
+		};
+
+		imr-lx4@fe890000 {
+			compatible = "renesas,r8a7795-imr-lx4",
+				     "renesas,imr-lx4";
+			reg = <0 0xfe890000 0 0x2000>;
+			interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 820>;
+			power-domains = <&sysc R8A7795_PD_A3VC>;
+			resets = <&cpg 820>;
+		};
+
 		vspbc: vsp@fe920000 {
 			compatible = "renesas,vsp2";
 			reg = <0 0xfe920000 0 0x8000>;
@@ -1755,6 +2065,7 @@
 		};
 
 		du: display@feb00000 {
+			compatible = "renesas,du-r8a7795";
 			reg = <0 0xfeb00000 0 0x80000>,
 			      <0 0xfeb90000 0 0x14>;
 			reg-names = "du", "lvds.0";
@@ -1768,6 +2079,7 @@
 				 <&cpg CPG_MOD 721>,
 				 <&cpg CPG_MOD 727>;
 			clock-names = "du.0", "du.1", "du.2", "du.3", "lvds.0";
+			vsps = <&vspd0 0 &vspd1 0 &vspd2 0 &vspd0 1>;
 			status = "disabled";
 
 			ports {
diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
index 38b58b7fca4b..daee1f1a3f68 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
@@ -9,8 +9,6 @@
  * kind, whether express or implied.
  */
 
-#define CPG_AUDIO_CLK_I		R8A7796_CLK_S0D4
-
 /dts-v1/;
 #include "r8a7796.dtsi"
 #include "ulcb.dtsi"
@@ -30,3 +28,15 @@
 		reg = <0x6 0x00000000 0x0 0x40000000>;
 	};
 };
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 722>,
+		 <&cpg CPG_MOD 727>,
+		 <&versaclock5 1>,
+		 <&versaclock5 3>,
+		 <&versaclock5 2>;
+	clock-names = "du.0", "du.1", "du.2", "lvds.0",
+		      "dclkin.0", "dclkin.1", "dclkin.2";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts
index db4f162d6bdd..b317be03306e 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts
@@ -8,8 +8,6 @@
  * kind, whether express or implied.
  */
 
-#define CPG_AUDIO_CLK_I		R8A7796_CLK_S0D4
-
 /dts-v1/;
 #include "r8a7796.dtsi"
 #include "salvator-x.dtsi"
@@ -29,3 +27,32 @@
 		reg = <0x6 0x00000000 0x0 0x80000000>;
 	};
 };
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 722>,
+		 <&cpg CPG_MOD 727>,
+		 <&versaclock5 1>,
+		 <&x21_clk>,
+		 <&versaclock5 2>;
+	clock-names = "du.0", "du.1", "du.2", "lvds.0",
+		      "dclkin.0", "dclkin.1", "dclkin.2";
+};
+
+&hdmi0 {
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+			rcar_dw_hdmi0_out: endpoint {
+				remote-endpoint = <&hdmi0_con>;
+			};
+		};
+	};
+};
+
+&hdmi0_con {
+	remote-endpoint = <&rcar_dw_hdmi0_out>;
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
index 1f6710912045..369092e17e34 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
@@ -12,6 +12,8 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/power/r8a7796-sysc.h>
 
+#define CPG_AUDIO_CLK_I		R8A7796_CLK_S0D4
+
 / {
 	compatible = "renesas,r8a7796";
 	#address-cells = <2>;
@@ -639,6 +641,126 @@
 			};
 		};
 
+		drif00: rif@e6f40000 {
+			compatible = "renesas,r8a7796-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6f40000 0 0x64>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 515>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x20>, <&dmac2 0x20>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 515>;
+			renesas,bonding = <&drif01>;
+			status = "disabled";
+		};
+
+		drif01: rif@e6f50000 {
+			compatible = "renesas,r8a7796-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6f50000 0 0x64>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 514>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x22>, <&dmac2 0x22>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 514>;
+			renesas,bonding = <&drif00>;
+			status = "disabled";
+		};
+
+		drif10: rif@e6f60000 {
+			compatible = "renesas,r8a7796-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6f60000 0 0x64>;
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 513>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x24>, <&dmac2 0x24>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 513>;
+			renesas,bonding = <&drif11>;
+			status = "disabled";
+		};
+
+		drif11: rif@e6f70000 {
+			compatible = "renesas,r8a7796-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6f70000 0 0x64>;
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 512>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x26>, <&dmac2 0x26>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 512>;
+			renesas,bonding = <&drif10>;
+			status = "disabled";
+		};
+
+		drif20: rif@e6f80000 {
+			compatible = "renesas,r8a7796-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6f80000 0 0x64>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 511>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x28>, <&dmac2 0x28>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 511>;
+			renesas,bonding = <&drif21>;
+			status = "disabled";
+		};
+
+		drif21: rif@e6f90000 {
+			compatible = "renesas,r8a7796-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6f90000 0 0x64>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 510>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x2a>, <&dmac2 0x2a>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 510>;
+			renesas,bonding = <&drif20>;
+			status = "disabled";
+		};
+
+		drif30: rif@e6fa0000 {
+			compatible = "renesas,r8a7796-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6fa0000 0 0x64>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 509>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x2c>, <&dmac2 0x2c>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 509>;
+			renesas,bonding = <&drif31>;
+			status = "disabled";
+		};
+
+		drif31: rif@e6fb0000 {
+			compatible = "renesas,r8a7796-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6fb0000 0 0x64>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 508>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x2e>, <&dmac2 0x2e>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 508>;
+			renesas,bonding = <&drif30>;
+			status = "disabled";
+		};
+
 		avb: ethernet@e6800000 {
 			compatible = "renesas,etheravb-r8a7796",
 				     "renesas,etheravb-rcar-gen3";
@@ -877,7 +999,7 @@
 			clocks = <&cpg CPG_MOD 211>;
 			dmas = <&dmac1 0x41>, <&dmac1 0x40>,
 			       <&dmac2 0x41>, <&dmac2 0x40>;
-			dma-names = "tx", "rx";
+			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
 			resets = <&cpg 211>;
 			#address-cells = <1>;
@@ -893,7 +1015,7 @@
 			clocks = <&cpg CPG_MOD 210>;
 			dmas = <&dmac1 0x43>, <&dmac1 0x42>,
 			       <&dmac2 0x43>, <&dmac2 0x42>;
-			dma-names = "tx", "rx";
+			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
 			resets = <&cpg 210>;
 			#address-cells = <1>;
@@ -1101,36 +1223,133 @@
 			dma-channels = <16>;
 		};
 
+		usb_dmac0: dma-controller@e65a0000 {
+			compatible = "renesas,r8a7796-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65a0000 0 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 330>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 330>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb_dmac1: dma-controller@e65b0000 {
+			compatible = "renesas,r8a7796-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65b0000 0 0x100>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 331>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 331>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
 		hsusb: usb@e6590000 {
-			/* placeholder */
+			compatible = "renesas,usbhs-r8a7796",
+				     "renesas,rcar-gen3-usbhs";
+			reg = <0 0xe6590000 0 0x100>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 704>;
+			dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
+			       <&usb_dmac1 0>, <&usb_dmac1 1>;
+			dma-names = "ch0", "ch1", "ch2", "ch3";
+			renesas,buswait = <11>;
+			phys = <&usb2_phy0>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 704>;
+			status = "disabled";
 		};
 
 		xhci0: usb@ee000000 {
-			/* placeholder */
+			compatible = "renesas,xhci-r8a7796",
+				     "renesas,rcar-gen3-xhci";
+			reg = <0 0xee000000 0 0xc00>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			status = "disabled";
 		};
 
 		ohci0: usb@ee080000 {
-			/* placeholder */
+			compatible = "generic-ohci";
+			reg = <0 0xee080000 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>;
+			phys = <&usb2_phy0>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 703>;
+			status = "disabled";
 		};
 
 		ehci0: usb@ee080100 {
-			/* placeholder */
+			compatible = "generic-ehci";
+			reg = <0 0xee080100 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>;
+			phys = <&usb2_phy0>;
+			phy-names = "usb";
+			companion= <&ohci0>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 703>;
+			status = "disabled";
 		};
 
 		usb2_phy0: usb-phy@ee080200 {
-			/* placeholder */
+			compatible = "renesas,usb2-phy-r8a7796",
+				     "renesas,rcar-gen3-usb2-phy";
+			reg = <0 0xee080200 0 0x700>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 703>;
+			#phy-cells = <0>;
+			status = "disabled";
 		};
 
 		ohci1: usb@ee0a0000 {
-			/* placeholder */
+			compatible = "generic-ohci";
+			reg = <0 0xee0a0000 0 0x100>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 702>;
+			phys = <&usb2_phy1>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			status = "disabled";
 		};
 
 		ehci1: usb@ee0a0100 {
-			/* placeholder */
+			compatible = "generic-ehci";
+			reg = <0 0xee0a0100 0 0x100>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 702>;
+			phys = <&usb2_phy1>;
+			phy-names = "usb";
+			companion= <&ohci1>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			status = "disabled";
 		};
 
 		usb2_phy1: usb-phy@ee0a0200 {
-			/* placeholder */
+			compatible = "renesas,usb2-phy-r8a7796",
+				     "renesas,rcar-gen3-usb2-phy";
+			reg = <0 0xee0a0200 0 0x700>;
+			clocks = <&cpg CPG_MOD 702>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			#phy-cells = <0>;
+			status = "disabled";
 		};
 
 		sdhi0: sd@ee100000 {
@@ -1440,8 +1659,150 @@
 			/* placeholder */
 		};
 
+		fcpf0: fcp@fe950000 {
+			compatible = "renesas,fcpf";
+			reg = <0 0xfe950000 0 0x200>;
+			clocks = <&cpg CPG_MOD 615>;
+			power-domains = <&sysc R8A7796_PD_A3VC>;
+			resets = <&cpg 615>;
+		};
+
+		vspb: vsp@fe960000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe960000 0 0x8000>;
+			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 626>;
+			power-domains = <&sysc R8A7796_PD_A3VC>;
+			resets = <&cpg 626>;
+
+			renesas,fcp = <&fcpvb0>;
+		};
+
+		fcpvb0: fcp@fe96f000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe96f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 607>;
+			power-domains = <&sysc R8A7796_PD_A3VC>;
+			resets = <&cpg 607>;
+		};
+
+		vspi0: vsp@fe9a0000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe9a0000 0 0x8000>;
+			interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 631>;
+			power-domains = <&sysc R8A7796_PD_A3VC>;
+			resets = <&cpg 631>;
+
+			renesas,fcp = <&fcpvi0>;
+		};
+
+		fcpvi0: fcp@fe9af000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe9af000 0 0x200>;
+			clocks = <&cpg CPG_MOD 611>;
+			power-domains = <&sysc R8A7796_PD_A3VC>;
+			resets = <&cpg 611>;
+		};
+
+		vspd0: vsp@fea20000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea20000 0 0x4000>;
+			interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 623>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 623>;
+
+			renesas,fcp = <&fcpvd0>;
+		};
+
+		fcpvd0: fcp@fea27000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea27000 0 0x200>;
+			clocks = <&cpg CPG_MOD 603>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 603>;
+		};
+
+		vspd1: vsp@fea28000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea28000 0 0x4000>;
+			interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 622>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 622>;
+
+			renesas,fcp = <&fcpvd1>;
+		};
+
+		fcpvd1: fcp@fea2f000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea2f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 602>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 602>;
+		};
+
+		vspd2: vsp@fea30000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea30000 0 0x4000>;
+			interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 621>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 621>;
+
+			renesas,fcp = <&fcpvd2>;
+		};
+
+		fcpvd2: fcp@fea37000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea37000 0 0x200>;
+			clocks = <&cpg CPG_MOD 601>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 601>;
+		};
+
+		hdmi0: hdmi@fead0000 {
+			compatible = "renesas,r8a7796-hdmi", "renesas,rcar-gen3-hdmi";
+			reg = <0 0xfead0000 0 0x10000>;
+			interrupts = <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 729>, <&cpg CPG_CORE R8A7796_CLK_HDMI>;
+			clock-names = "iahb", "isfr";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 729>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port@0 {
+					reg = <0>;
+					dw_hdmi0_in: endpoint {
+						remote-endpoint = <&du_out_hdmi0>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
 		du: display@feb00000 {
-			/* placeholder */
+			compatible = "renesas,du-r8a7796";
+			reg = <0 0xfeb00000 0 0x70000>,
+			      <0 0xfeb90000 0 0x14>;
+			reg-names = "du", "lvds.0";
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 724>,
+				 <&cpg CPG_MOD 723>,
+				 <&cpg CPG_MOD 722>,
+				 <&cpg CPG_MOD 727>;
+			clock-names = "du.0", "du.1", "du.2", "lvds.0";
+			status = "disabled";
+
+			vsps = <&vspd0 &vspd1 &vspd2>;
 
 			ports {
 				#address-cells = <1>;
@@ -1452,7 +1813,38 @@
 					du_out_rgb: endpoint {
 					};
 				};
+				port@1 {
+					reg = <1>;
+					du_out_hdmi0: endpoint {
+						remote-endpoint = <&dw_hdmi0_in>;
+					};
+				};
+				port@2 {
+					reg = <2>;
+					du_out_lvds0: endpoint {
+					};
+				};
 			};
 		};
+
+		imr-lx4@fe860000 {
+			compatible = "renesas,r8a7796-imr-lx4",
+				     "renesas,imr-lx4";
+			reg = <0 0xfe860000 0 0x2000>;
+			interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 823>;
+			power-domains = <&sysc R8A7796_PD_A3VC>;
+			resets = <&cpg 823>;
+		};
+
+		imr-lx4@fe870000 {
+			compatible = "renesas,r8a7796-imr-lx4",
+				     "renesas,imr-lx4";
+			reg = <0 0xfe870000 0 0x2000>;
+			interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 822>;
+			power-domains = <&sysc R8A7796_PD_A3VC>;
+			resets = <&cpg 822>;
+		};
 	};
 };
diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
new file mode 100644
index 000000000000..d144370051d5
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
@@ -0,0 +1,46 @@
+/*
+ * Device Tree Source for the Draak board
+ *
+ * Copyright (C) 2016 Renesas Electronics Corp.
+ * Copyright (C) 2017 Glider bvba
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "r8a77995.dtsi"
+
+/ {
+	model = "Renesas Draak board based on r8a77995";
+	compatible = "renesas,draak", "renesas,r8a77995";
+
+	aliases {
+		serial0 = &scif2;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x18000000>;
+	};
+};
+
+&extal_clk {
+	clock-frequency = <48000000>;
+};
+
+&scif2 {
+	status = "okay";
+};
+
+&rwdt {
+	timeout-sec = <60>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
new file mode 100644
index 000000000000..d0f95b78c022
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
@@ -0,0 +1,155 @@
+/*
+ * Device Tree Source for the r8a77995 SoC
+ *
+ * Copyright (C) 2016 Renesas Electronics Corp.
+ * Copyright (C) 2017 Glider bvba
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/clock/renesas-cpg-mssr.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "renesas,r8a77995";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		a53_0: cpu@0 {
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x0>;
+			device_type = "cpu";
+			power-domains = <&sysc 5>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+		};
+
+		L2_CA53: cache-controller-1 {
+			compatible = "cache";
+			power-domains = <&sysc 21>;
+			cache-unified;
+			cache-level = <2>;
+		};
+	};
+
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gic: interrupt-controller@f1010000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xf1010000 0 0x1000>,
+			      <0x0 0xf1020000 0 0x20000>,
+			      <0x0 0xf1040000 0 0x20000>,
+			      <0x0 0xf1060000 0 0x20000>;
+			interrupts = <GIC_PPI 9
+					(GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&cpg CPG_MOD 408>;
+			clock-names = "clk";
+			power-domains = <&sysc 32>;
+			resets = <&cpg 408>;
+		};
+
+		timer {
+			compatible = "arm,armv8-timer";
+			interrupts = <GIC_PPI 13
+					(GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 14
+					(GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 11
+					(GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 10
+					(GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
+		};
+
+		rwdt: watchdog@e6020000 {
+			compatible = "renesas,r8a77995-wdt",
+				     "renesas,rcar-gen3-wdt";
+			reg = <0 0xe6020000 0 0x0c>;
+			clocks = <&cpg CPG_MOD 402>;
+			power-domains = <&sysc 32>;
+			resets = <&cpg 402>;
+			status = "disabled";
+		};
+
+		pmu_a53 {
+			compatible = "arm,cortex-a53-pmu";
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		cpg: clock-controller@e6150000 {
+			compatible = "renesas,r8a77995-cpg-mssr";
+			reg = <0 0xe6150000 0 0x1000>;
+			clocks = <&extal_clk>;
+			clock-names = "extal";
+			#clock-cells = <2>;
+			#power-domain-cells = <0>;
+			#reset-cells = <1>;
+		};
+
+		rst: reset-controller@e6160000 {
+			compatible = "renesas,r8a77995-rst";
+			reg = <0 0xe6160000 0 0x0200>;
+		};
+
+		pfc: pfc@e6060000 {
+			compatible = "renesas,pfc-r8a77995";
+			reg = <0 0xe6060000 0 0x508>;
+		};
+
+		prr: chipid@fff00044 {
+			compatible = "renesas,prr";
+			reg = <0 0xfff00044 0 4>;
+		};
+
+		sysc: system-controller@e6180000 {
+			compatible = "renesas,r8a77995-sysc";
+			reg = <0 0xe6180000 0 0x0400>;
+			#power-domain-cells = <1>;
+		};
+
+		scif2: serial@e6e88000 {
+			compatible = "renesas,scif-r8a77995",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e88000 0 64>;
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 310>,
+				 <&cpg CPG_CORE 16>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			power-domains = <&sysc 32>;
+			resets = <&cpg 310>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
index f903957da504..4786c67b5e65 100644
--- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi
+++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
@@ -268,10 +268,6 @@
 				remote-endpoint = <&adv7123_in>;
 			};
 		};
-		port@3 {
-			lvds_connector: endpoint {
-			};
-		};
 	};
 };
 
diff --git a/arch/arm64/boot/dts/renesas/salvator-xs.dtsi b/arch/arm64/boot/dts/renesas/salvator-xs.dtsi
index 81227e3c2c6f..bf4d200fb546 100644
--- a/arch/arm64/boot/dts/renesas/salvator-xs.dtsi
+++ b/arch/arm64/boot/dts/renesas/salvator-xs.dtsi
@@ -18,3 +18,13 @@
 &extal_clk {
 	clock-frequency = <16640000>;
 };
+
+&i2c4 {
+	versaclock6: clock-generator@6a {
+		compatible = "idt,5p49v6901";
+		reg = <0x6a>;
+		#clock-cells = <1>;
+		clocks = <&x23_clk>;
+		clock-names = "xin";
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi
index d1a3f3b7a0ab..1b868df2393f 100644
--- a/arch/arm64/boot/dts/renesas/ulcb.dtsi
+++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi
@@ -34,6 +34,16 @@
 		clock-frequency = <11289600>;
 	};
 
+	hdmi0-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi0_con: endpoint {
+			};
+		};
+	};
+
 	keyboard {
 		compatible = "gpio-keys";
 
@@ -120,6 +130,12 @@
 		#clock-cells = <0>;
 		clock-frequency = <24576000>;
 	};
+
+	x23_clk: x23-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
 };
 
 &audio_clk_a {
@@ -153,6 +169,23 @@
 	clock-frequency = <32768>;
 };
 
+&hdmi0 {
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+			rcar_dw_hdmi0_out: endpoint {
+				remote-endpoint = <&hdmi0_con>;
+			};
+		};
+	};
+};
+
+&hdmi0_con {
+	remote-endpoint = <&rcar_dw_hdmi0_out>;
+};
+
 &i2c2 {
 	pinctrl-0 = <&i2c2_pins>;
 	pinctrl-names = "default";
@@ -189,6 +222,24 @@
 	};
 };
 
+&i2c4 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+
+	versaclock5: clock-generator@6a {
+		compatible = "idt,5p49v5925";
+		reg = <0x6a>;
+		#clock-cells = <1>;
+		clocks = <&x23_clk>;
+		clock-names = "xin";
+	};
+};
+
+&i2c_dvfs {
+	status = "okay";
+};
+
 &ohci1 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index bcfa53b1e6b7..f1c9b13cea5c 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -1,4 +1,5 @@
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-evb-act8846.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-geekbox.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-orion-r68-meta.dtb
@@ -7,6 +8,8 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-r88.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-firefly.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-kevin.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb
 
 always		:= $(dtb-y)
 subdir-y	:= $(dts-dirs)
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-evb.dts b/arch/arm64/boot/dts/rockchip/rk3328-evb.dts
index b9f36dad17e6..8e6a65431756 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-evb.dts
@@ -51,6 +51,25 @@
 		stdout-path = "serial2:1500000n8";
 	};
 
+	dc_12v: dc-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "dc_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc_sys: vcc-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_12v>;
+	};
+
 	vcc_phy: vcc-phy-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_phy";
@@ -69,6 +88,151 @@
 	status = "okay";
 };
 
+&i2c1 {
+	status = "okay";
+
+	rk805: rk805@18 {
+		compatible = "rockchip,rk805";
+		reg = <0x18>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk805-clkout2";
+		gpio-controller;
+		#gpio-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc5-supply = <&vcc_io>;
+		vcc6-supply = <&vcc_io>;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-name = "vdd_logic";
+				regulator-min-microvolt = <712500>;
+				regulator-max-microvolt = <1450000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vdd_arm: DCDC_REG2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <712500>;
+				regulator-max-microvolt = <1450000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_io: DCDC_REG4 {
+				regulator-name = "vcc_io";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_18: LDO_REG1 {
+				regulator-name = "vcc_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc18_emmc: LDO_REG2 {
+				regulator-name = "vcc18_emmc";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_10: LDO_REG3 {
+				regulator-name = "vdd_10";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+		};
+	};
+};
+
+&pinctrl {
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&tsadc {
+	status = "okay";
+};
+
 &uart2 {
 	status = "okay";
 };
+
+&u2phy {
+	status = "okay";
+};
+
+&u2phy_host {
+	status = "okay";
+};
+
+&u2phy_otg {
+	status = "okay";
+};
+
+&usb20_otg {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
new file mode 100644
index 000000000000..d4f80786e7c2
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
@@ -0,0 +1,333 @@
+/*
+ * Copyright (c) 2017 PINE64
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "rk3328.dtsi"
+
+/ {
+	model = "Pine64 Rock64";
+	compatible = "pine64,rock64", "rockchip,rk3328";
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	gmac_clkin: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "gmac_clkin";
+		#clock-cells = <0>;
+	};
+
+	vcc_sd: sdmmc-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc0m1_gpio>;
+		regulator-name = "vcc_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_host_5v: vcc-host-5v-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb30_host_drv>;
+		regulator-name = "vcc_host_5v";
+		regulator-always-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc_host1_5v: vcc_otg_5v: vcc-host1-5v-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb20_host_drv>;
+		regulator-name = "vcc_host1_5v";
+		regulator-always-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc_sys: vcc-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+	vmmc-supply = <&vcc_io>;
+	vqmmc-supply = <&vcc18_emmc>;
+	status = "okay";
+};
+
+&gmac2io {
+	assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
+	assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>;
+	clock_in_out = "input";
+	phy-supply = <&vcc_io>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmiim1_pins>;
+	snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	tx_delay = <0x26>;
+	rx_delay = <0x11>;
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	rk805: rk805@18 {
+		compatible = "rockchip,rk805";
+		reg = <0x18>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk805-clkout2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc5-supply = <&vcc_io>;
+		vcc6-supply = <&vcc_sys>;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-name = "vdd_logic";
+				regulator-min-microvolt = <712500>;
+				regulator-max-microvolt = <1450000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vdd_arm: DCDC_REG2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <712500>;
+				regulator-max-microvolt = <1450000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_io: DCDC_REG4 {
+				regulator-name = "vcc_io";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_18: LDO_REG1 {
+				regulator-name = "vdd_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc18_emmc: LDO_REG2 {
+				regulator-name = "vcc_18emmc";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_10: LDO_REG3 {
+				regulator-name = "vdd_10";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+		};
+	};
+};
+
+&io_domains {
+	status = "okay";
+
+	vccio1-supply = <&vcc_io>;
+	vccio2-supply = <&vcc18_emmc>;
+	vccio3-supply = <&vcc_io>;
+	vccio4-supply = <&vcc_18>;
+	vccio5-supply = <&vcc_io>;
+	vccio6-supply = <&vcc_io>;
+	pmuio-supply = <&vcc_io>;
+};
+
+&pinctrl {
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb2 {
+		usb20_host_drv: usb20-host-drv {
+			rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb3 {
+		usb30_host_drv: usb30-host-drv {
+			rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	max-frequency = <150000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>;
+	vmmc-supply = <&vcc_sd>;
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <0>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&u2phy {
+	status = "okay";
+
+	u2phy_host: host-port {
+		status = "okay";
+	};
+
+	u2phy_otg: otg-port {
+		status = "okay";
+	};
+};
+
+&usb20_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index d48bf5d9f8bd..6d615cb6e64d 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -47,6 +47,7 @@
 #include <dt-bindings/pinctrl/rockchip.h>
 #include <dt-bindings/power/rk3328-power.h>
 #include <dt-bindings/soc/rockchip,boot-mode.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	compatible = "rockchip,rk3328";
@@ -76,8 +77,11 @@
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x0 0x0>;
 			clocks = <&cru ARMCLK>;
+			#cooling-cells = <2>;
+			dynamic-power-coefficient = <120>;
 			enable-method = "psci";
 			next-level-cache = <&l2>;
+			operating-points-v2 = <&cpu0_opp_table>;
 		};
 
 		cpu1: cpu@1 {
@@ -85,8 +89,10 @@
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x0 0x1>;
 			clocks = <&cru ARMCLK>;
+			dynamic-power-coefficient = <120>;
 			enable-method = "psci";
 			next-level-cache = <&l2>;
+			operating-points-v2 = <&cpu0_opp_table>;
 		};
 
 		cpu2: cpu@2 {
@@ -94,8 +100,10 @@
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x0 0x2>;
 			clocks = <&cru ARMCLK>;
+			dynamic-power-coefficient = <120>;
 			enable-method = "psci";
 			next-level-cache = <&l2>;
+			operating-points-v2 = <&cpu0_opp_table>;
 		};
 
 		cpu3: cpu@3 {
@@ -103,8 +111,10 @@
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x0 0x3>;
 			clocks = <&cru ARMCLK>;
+			dynamic-power-coefficient = <120>;
 			enable-method = "psci";
 			next-level-cache = <&l2>;
+			operating-points-v2 = <&cpu0_opp_table>;
 		};
 
 		l2: l2-cache0 {
@@ -112,6 +122,43 @@
 		};
 	};
 
+	cpu0_opp_table: opp_table0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-408000000 {
+			opp-hz = /bits/ 64 <408000000>;
+			opp-microvolt = <950000>;
+			clock-latency-ns = <40000>;
+			opp-suspend;
+		};
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <950000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-816000000 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1225000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-1296000000 {
+			opp-hz = /bits/ 64 <1296000000>;
+			opp-microvolt = <1300000>;
+			clock-latency-ns = <40000>;
+		};
+	};
+
 	amba {
 		compatible = "simple-bus";
 		#address-cells = <2>;
@@ -158,12 +205,84 @@
 		clock-output-names = "xin24m";
 	};
 
+	i2s0: i2s@ff000000 {
+		compatible = "rockchip,rk3328-i2s", "rockchip,rk3066-i2s";
+		reg = <0x0 0xff000000 0x0 0x1000>;
+		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_I2S0>, <&cru HCLK_I2S0_8CH>;
+		clock-names = "i2s_clk", "i2s_hclk";
+		dmas = <&dmac 11>, <&dmac 12>;
+		dma-names = "tx", "rx";
+		status = "disabled";
+	};
+
+	i2s1: i2s@ff010000 {
+		compatible = "rockchip,rk3328-i2s", "rockchip,rk3066-i2s";
+		reg = <0x0 0xff010000 0x0 0x1000>;
+		interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_I2S1>, <&cru HCLK_I2S1_8CH>;
+		clock-names = "i2s_clk", "i2s_hclk";
+		dmas = <&dmac 14>, <&dmac 15>;
+		dma-names = "tx", "rx";
+		status = "disabled";
+	};
+
+	i2s2: i2s@ff020000 {
+		compatible = "rockchip,rk3328-i2s", "rockchip,rk3066-i2s";
+		reg = <0x0 0xff020000 0x0 0x1000>;
+		interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_I2S2>, <&cru HCLK_I2S2_2CH>;
+		clock-names = "i2s_clk", "i2s_hclk";
+		dmas = <&dmac 0>, <&dmac 1>;
+		dma-names = "tx", "rx";
+		status = "disabled";
+	};
+
+	spdif: spdif@ff030000 {
+		compatible = "rockchip,rk3328-spdif";
+		reg = <0x0 0xff030000 0x0 0x1000>;
+		interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_SPDIF>, <&cru HCLK_SPDIF_8CH>;
+		clock-names = "mclk", "hclk";
+		dmas = <&dmac 10>;
+		dma-names = "tx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spdifm2_tx>;
+		status = "disabled";
+	};
+
+	pdm: pdm@ff040000 {
+		compatible = "rockchip,pdm";
+		reg = <0x0 0xff040000 0x0 0x1000>;
+		clocks = <&cru SCLK_PDM>, <&cru HCLK_PDM>;
+		clock-names = "pdm_clk", "pdm_hclk";
+		dmas = <&dmac 16>;
+		dma-names = "rx";
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&pdmm0_clk
+			     &pdmm0_sdi0
+			     &pdmm0_sdi1
+			     &pdmm0_sdi2
+			     &pdmm0_sdi3>;
+		pinctrl-1 = <&pdmm0_clk_sleep
+			     &pdmm0_sdi0_sleep
+			     &pdmm0_sdi1_sleep
+			     &pdmm0_sdi2_sleep
+			     &pdmm0_sdi3_sleep>;
+		status = "disabled";
+	};
+
 	grf: syscon@ff100000 {
 		compatible = "rockchip,rk3328-grf", "syscon", "simple-mfd";
 		reg = <0x0 0xff100000 0x0 0x1000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 
+		io_domains: io-domains {
+			compatible = "rockchip,rk3328-io-voltage-domain";
+			status = "disabled";
+		};
+
 		power: power-controller {
 			compatible = "rockchip,rk3328-power-controller";
 			#power-domain-cells = <1>;
@@ -310,6 +429,108 @@
 		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
+	pwm0: pwm@ff1b0000 {
+		compatible = "rockchip,rk3328-pwm";
+		reg = <0x0 0xff1b0000 0x0 0x10>;
+		clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm0_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm1: pwm@ff1b0010 {
+		compatible = "rockchip,rk3328-pwm";
+		reg = <0x0 0xff1b0010 0x0 0x10>;
+		clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm1_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm2: pwm@ff1b0020 {
+		compatible = "rockchip,rk3328-pwm";
+		reg = <0x0 0xff1b0020 0x0 0x10>;
+		clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm2_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm3: pwm@ff1b0030 {
+		compatible = "rockchip,rk3328-pwm";
+		reg = <0x0 0xff1b0030 0x0 0x10>;
+		interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwmir_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	thermal-zones {
+		soc_thermal: soc-thermal {
+			polling-delay-passive = <20>;
+			polling-delay = <1000>;
+			sustainable-power = <1000>;
+
+			thermal-sensors = <&tsadc 0>;
+
+			trips {
+				threshold: trip-point0 {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				target: trip-point1 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				soc_crit: soc-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&target>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					contribution = <4096>;
+				};
+			};
+		};
+
+	};
+
+	tsadc: tsadc@ff250000 {
+		compatible = "rockchip,rk3328-tsadc";
+		reg = <0x0 0xff250000 0x0 0x100>;
+		interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH 0>;
+		assigned-clocks = <&cru SCLK_TSADC>;
+		assigned-clock-rates = <50000>;
+		clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
+		clock-names = "tsadc", "apb_pclk";
+		pinctrl-names = "init", "default", "sleep";
+		pinctrl-0 = <&otp_gpio>;
+		pinctrl-1 = <&otp_out>;
+		pinctrl-2 = <&otp_gpio>;
+		resets = <&cru SRST_TSADC>;
+		reset-names = "tsadc-apb";
+		rockchip,grf = <&grf>;
+		rockchip,hw-tshut-temp = <100000>;
+		#thermal-sensor-cells = <1>;
+		status = "disabled";
+	};
+
 	saradc: adc@ff280000 {
 		compatible = "rockchip,rk3328-saradc", "rockchip,rk3399-saradc";
 		reg = <0x0 0xff280000 0x0 0x100>;
@@ -322,6 +543,51 @@
 		status = "disabled";
 	};
 
+	h265e_mmu: iommu@ff330200 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff330200 0 0x100>;
+		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "h265e_mmu";
+		#iommu-cells = <0>;
+		status = "disabled";
+	};
+
+	vepu_mmu: iommu@ff340800 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff340800 0x0 0x40>;
+		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "vepu_mmu";
+		#iommu-cells = <0>;
+		status = "disabled";
+	};
+
+	vpu_mmu: iommu@ff350800 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff350800 0x0 0x40>;
+		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "vpu_mmu";
+		#iommu-cells = <0>;
+		status = "disabled";
+	};
+
+	rkvdec_mmu: iommu@ff360480 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff360480 0x0 0x40>, <0x0 0xff3604c0 0x0 0x40>;
+		interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "rkvdec_mmu";
+		#iommu-cells = <0>;
+		status = "disabled";
+	};
+
+	vop_mmu: iommu@ff373f00 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff373f00 0x0 0x100>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "vop_mmu";
+		#iommu-cells = <0>;
+		status = "disabled";
+	};
+
 	cru: clock-controller@ff440000 {
 		compatible = "rockchip,rk3328-cru", "rockchip,cru", "syscon";
 		reg = <0x0 0xff440000 0x0 0x1000>;
@@ -374,6 +640,43 @@
 			<32768>;
 	};
 
+	usb2phy_grf: syscon@ff450000 {
+		compatible = "rockchip,rk3328-usb2phy-grf", "syscon",
+			     "simple-mfd";
+		reg = <0x0 0xff450000 0x0 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		u2phy: usb2-phy@100 {
+			compatible = "rockchip,rk3328-usb2phy";
+			reg = <0x100 0x10>;
+			clocks = <&xin24m>;
+			clock-names = "phyclk";
+			clock-output-names = "usb480m_phy";
+			#clock-cells = <0>;
+			assigned-clocks = <&cru USB480M>;
+			assigned-clock-parents = <&u2phy>;
+			status = "disabled";
+
+			u2phy_otg: otg-port {
+				#phy-cells = <0>;
+				interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "otg-bvalid", "otg-id",
+						  "linestate";
+				status = "disabled";
+			};
+
+			u2phy_host: host-port {
+				#phy-cells = <0>;
+				interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "linestate";
+				status = "disabled";
+			};
+		};
+	};
+
 	sdmmc: dwmmc@ff500000 {
 		compatible = "rockchip,rk3328-dw-mshc", "rockchip,rk3288-dw-mshc";
 		reg = <0x0 0xff500000 0x0 0x4000>;
@@ -463,6 +766,45 @@
 		};
 	};
 
+	usb20_otg: usb@ff580000 {
+		compatible = "rockchip,rk3328-usb", "rockchip,rk3066-usb",
+			     "snps,dwc2";
+		reg = <0x0 0xff580000 0x0 0x40000>;
+		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_OTG>;
+		clock-names = "otg";
+		dr_mode = "otg";
+		g-np-tx-fifo-size = <16>;
+		g-rx-fifo-size = <280>;
+		g-tx-fifo-size = <256 128 128 64 32 16>;
+		g-use-dma;
+		phys = <&u2phy_otg>;
+		phy-names = "usb2-phy";
+		status = "disabled";
+	};
+
+	usb_host0_ehci: usb@ff5c0000 {
+		compatible = "generic-ehci";
+		reg = <0x0 0xff5c0000 0x0 0x10000>;
+		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_HOST0>, <&u2phy>;
+		clock-names = "usbhost", "utmi";
+		phys = <&u2phy_host>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
+	usb_host0_ohci: usb@ff5d0000 {
+		compatible = "generic-ohci";
+		reg = <0x0 0xff5d0000 0x0 0x10000>;
+		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_HOST0>, <&u2phy>;
+		clock-names = "usbhost", "utmi";
+		phys = <&u2phy_host>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
 	gic: interrupt-controller@ff811000 {
 		compatible = "arm,gic-400";
 		#interrupt-cells = <3>;
@@ -649,6 +991,62 @@
 			};
 		};
 
+		pdm-0 {
+			pdmm0_clk: pdmm0-clk {
+				rockchip,pins = <2 RK_PC2 2 &pcfg_pull_none>;
+			};
+
+			pdmm0_fsync: pdmm0-fsync {
+				rockchip,pins = <2 RK_PC7 2 &pcfg_pull_none>;
+			};
+
+			pdmm0_sdi0: pdmm0-sdi0 {
+				rockchip,pins = <2 RK_PC3 2 &pcfg_pull_none>;
+			};
+
+			pdmm0_sdi1: pdmm0-sdi1 {
+				rockchip,pins = <2 RK_PC4 2 &pcfg_pull_none>;
+			};
+
+			pdmm0_sdi2: pdmm0-sdi2 {
+				rockchip,pins = <2 RK_PC5 2 &pcfg_pull_none>;
+			};
+
+			pdmm0_sdi3: pdmm0-sdi3 {
+				rockchip,pins = <2 RK_PC6 2 &pcfg_pull_none>;
+			};
+
+			pdmm0_clk_sleep: pdmm0-clk-sleep {
+				rockchip,pins =
+					<2 RK_PC2 RK_FUNC_GPIO &pcfg_input_high>;
+			};
+
+			pdmm0_sdi0_sleep: pdmm0-sdi0-sleep {
+				rockchip,pins =
+					<2 RK_PC3 RK_FUNC_GPIO &pcfg_input_high>;
+			};
+
+			pdmm0_sdi1_sleep: pdmm0-sdi1-sleep {
+				rockchip,pins =
+					<2 RK_PC4 RK_FUNC_GPIO &pcfg_input_high>;
+			};
+
+			pdmm0_sdi2_sleep: pdmm0-sdi2-sleep {
+				rockchip,pins =
+					<2 RK_PC5 RK_FUNC_GPIO &pcfg_input_high>;
+			};
+
+			pdmm0_sdi3_sleep: pdmm0-sdi3-sleep {
+				rockchip,pins =
+					<2 RK_PC6 RK_FUNC_GPIO &pcfg_input_high>;
+			};
+
+			pdmm0_fsync_sleep: pdmm0-fsync-sleep {
+				rockchip,pins =
+					<2 RK_PC7 RK_FUNC_GPIO &pcfg_input_high>;
+			};
+		};
+
 		tsadc {
 			otp_gpio: otp-gpio {
 				rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi b/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi
index 4772917c5f7e..a37220a9387c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi
@@ -156,7 +156,6 @@
 	disable-wp;
 	mmc-pwrseq = <&emmc_pwrseq>;
 	non-removable;
-	num-slots = <1>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
 	status = "okay";
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts b/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts
index e631d424f08e..5e4d3a7015f5 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts
@@ -117,7 +117,6 @@
 	clock-frequency = <150000000>;
 	disable-wp;
 	non-removable;
-	num-slots = <1>;
 	vmmc-supply = <&vcc_io>;
 	vqmmc-supply = <&vcc18_flash>;
 	pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts
index fac116acc12f..d3f6c8e0d206 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts
@@ -203,7 +203,6 @@
 	mmc-hs200-1_2v;
 	mmc-hs200-1_8v;
 	non-removable;
-	num-slots = <1>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
 	status = "okay";
@@ -347,7 +346,6 @@
 	max-frequency = <50000000>;
 	cap-sd-highspeed;
 	card-detect-delay = <200>;
-	num-slots = <1>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
 	vmmc-supply = <&vcc_sd>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts b/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
index ff48edd8e348..13a9e22f5d2d 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
@@ -86,12 +86,10 @@
 	cap-mmc-highspeed;
 	clock-frequency = <150000000>;
 	disable-wp;
-	keep-power-in-suspend;
 	mmc-hs200-1_8v;
 	no-sdio;
 	no-sd;
 	non-removable;
-	num-slots = <1>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>;
 	vmmc-supply = <&vcc_io>;
@@ -281,7 +279,6 @@
 	card-detect-delay = <200>;
 	no-emmc;
 	no-sdio;
-	num-slots = <1>;
 	sd-uhs-sdr12;
 	sd-uhs-sdr25;
 	pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
index 7134181f1dc2..b3510d56517a 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
@@ -189,7 +189,6 @@
 	disable-wp;
 	mmc-pwrseq = <&emmc_pwrseq>;
 	non-removable;
-	num-slots = <1>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
 	status = "okay";
@@ -254,7 +253,6 @@
 	keep-power-in-suspend;
 	mmc-pwrseq = <&sdio_pwrseq>;
 	non-removable;
-	num-slots = <1>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdio0_clk &sdio0_cmd &sdio0_bus4>;
 	vmmc-supply = <&vcc_io>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
index 6d5dc0587e59..e0518b4bc6c2 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
@@ -113,7 +113,8 @@
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
-
+			clocks = <&cru ARMCLKL>;
+			operating-points-v2 = <&cluster0_opp>;
 			#cooling-cells = <2>; /* min followed by max */
 		};
 
@@ -122,6 +123,8 @@
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x0 0x1>;
 			enable-method = "psci";
+			clocks = <&cru ARMCLKL>;
+			operating-points-v2 = <&cluster0_opp>;
 		};
 
 		cpu_l2: cpu@2 {
@@ -129,6 +132,8 @@
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x0 0x2>;
 			enable-method = "psci";
+			clocks = <&cru ARMCLKL>;
+			operating-points-v2 = <&cluster0_opp>;
 		};
 
 		cpu_l3: cpu@3 {
@@ -136,6 +141,8 @@
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x0 0x3>;
 			enable-method = "psci";
+			clocks = <&cru ARMCLKL>;
+			operating-points-v2 = <&cluster0_opp>;
 		};
 
 		cpu_b0: cpu@100 {
@@ -143,7 +150,8 @@
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x0 0x100>;
 			enable-method = "psci";
-
+			clocks = <&cru ARMCLKB>;
+			operating-points-v2 = <&cluster1_opp>;
 			#cooling-cells = <2>; /* min followed by max */
 		};
 
@@ -152,6 +160,8 @@
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x0 0x101>;
 			enable-method = "psci";
+			clocks = <&cru ARMCLKB>;
+			operating-points-v2 = <&cluster1_opp>;
 		};
 
 		cpu_b2: cpu@102 {
@@ -159,6 +169,8 @@
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x0 0x102>;
 			enable-method = "psci";
+			clocks = <&cru ARMCLKB>;
+			operating-points-v2 = <&cluster1_opp>;
 		};
 
 		cpu_b3: cpu@103 {
@@ -166,6 +178,62 @@
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x0 0x103>;
 			enable-method = "psci";
+			clocks = <&cru ARMCLKB>;
+			operating-points-v2 = <&cluster1_opp>;
+		};
+	};
+
+	cluster0_opp: opp-table0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp00 {
+			opp-hz = /bits/ 64 <312000000>;
+			opp-microvolt = <950000>;
+			clock-latency-ns = <40000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <408000000>;
+			opp-microvolt = <950000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <950000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <1025000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <1125000>;
+		};
+	};
+
+	cluster1_opp: opp-table1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp00 {
+			opp-hz = /bits/ 64 <312000000>;
+			opp-microvolt = <950000>;
+			clock-latency-ns = <40000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <408000000>;
+			opp-microvolt = <950000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <950000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <975000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <1050000>;
 		};
 	};
 
@@ -700,6 +768,19 @@
 		interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
+	spdif: spdif@ff880000 {
+		compatible = "rockchip,rk3368-spdif";
+		reg = <0x0 0xff880000 0x0 0x1000>;
+		interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_SPDIF_8CH>, <&cru HCLK_SPDIF>;
+		clock-names = "mclk", "hclk";
+		dmas = <&dmac_bus 3>;
+		dma-names = "tx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spdif_tx>;
+		status = "disabled";
+	};
+
 	i2s_2ch: i2s-2ch@ff890000 {
 		compatible = "rockchip,rk3368-i2s", "rockchip,rk3066-i2s";
 		reg = <0x0 0xff890000 0x0 0x1000>;
@@ -724,6 +805,55 @@
 		status = "disabled";
 	};
 
+	iep_mmu: iommu@ff900800 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff900800 0x0 0x100>;
+		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "iep_mmu";
+		#iommu-cells = <0>;
+		status = "disabled";
+	};
+
+	isp_mmu: iommu@ff914000 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff914000 0x0 0x100>,
+		      <0x0 0xff915000 0x0 0x100>;
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "isp_mmu";
+		#iommu-cells = <0>;
+		rockchip,disable-mmu-reset;
+		status = "disabled";
+	};
+
+	vop_mmu: iommu@ff930300 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff930300 0x0 0x100>;
+		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "vop_mmu";
+		#iommu-cells = <0>;
+		status = "disabled";
+	};
+
+	hevc_mmu: iommu@ff9a0440 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff9a0440 0x0 0x40>,
+		      <0x0 0xff9a0480 0x0 0x40>;
+		interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "hevc_mmu";
+		#iommu-cells = <0>;
+		status = "disabled";
+	};
+
+	vpu_mmu: iommu@ff9a0800 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff9a0800 0x0 0x100>;
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "vepu_mmu", "vdpu_mmu";
+		#iommu-cells = <0>;
+		status = "disabled";
+	};
+
 	gic: interrupt-controller@ffb71000 {
 		compatible = "arm,gic-400";
 		interrupt-controller;
@@ -1024,6 +1154,12 @@
 			};
 		};
 
+		spdif {
+			spdif_tx: spdif-tx {
+				rockchip,pins =	<2 RK_PC7 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
 		spi0 {
 			spi0_clk: spi0-clk {
 				rockchip,pins = <1 29 RK_FUNC_2 &pcfg_pull_up>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-evb.dts b/arch/arm64/boot/dts/rockchip/rk3399-evb.dts
index 42033bcc614c..56533c344ef2 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-evb.dts
@@ -199,7 +199,7 @@
 	ep-gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_HIGH>;
 	num-lanes = <4>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&pcie_clkreqn>;
+	pinctrl-0 = <&pcie_clkreqn_cpm>;
 	status = "disabled";
 };
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
index ba1d9810ad1e..7fd4bfcaa38e 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
@@ -43,6 +43,7 @@
 /dts-v1/;
 #include <dt-bindings/pwm/pwm.h>
 #include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
 
 / {
 	model = "Firefly-RK3399 Board";
@@ -550,7 +551,7 @@
 	ep-gpios = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
 	num-lanes = <4>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&pcie_clkreqn>;
+	pinctrl-0 = <&pcie_clkreqn_cpm>;
 	status = "okay";
 };
 
@@ -630,9 +631,20 @@
 	status = "okay";
 };
 
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	max-frequency = <150000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+	status = "okay";
+};
+
 &sdhci {
 	bus-width = <8>;
-	keep-power-in-suspend;
 	mmc-hs400-1_8v;
 	mmc-hs400-enhanced-strobe;
 	non-removable;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts
index 7bd31066399b..a3d3cea7dc4f 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts
@@ -264,6 +264,50 @@ ap_i2c_dig: &i2c2 {
 	};
 };
 
+&ppvar_bigcpu_pwm {
+	regulator-min-microvolt = <798674>;
+	regulator-max-microvolt = <1302172>;
+};
+
+&ppvar_bigcpu {
+	regulator-min-microvolt = <798674>;
+	regulator-max-microvolt = <1302172>;
+	ctrl-voltage-range = <798674 1302172>;
+};
+
+&ppvar_litcpu_pwm {
+	regulator-min-microvolt = <799065>;
+	regulator-max-microvolt = <1303738>;
+};
+
+&ppvar_litcpu {
+	regulator-min-microvolt = <799065>;
+	regulator-max-microvolt = <1303738>;
+	ctrl-voltage-range = <799065 1303738>;
+};
+
+&ppvar_gpu_pwm {
+	regulator-min-microvolt = <785782>;
+	regulator-max-microvolt = <1217729>;
+};
+
+&ppvar_gpu {
+	regulator-min-microvolt = <785782>;
+	regulator-max-microvolt = <1217729>;
+	ctrl-voltage-range = <785782 1217729>;
+};
+
+&ppvar_centerlogic_pwm {
+	regulator-min-microvolt = <800069>;
+	regulator-max-microvolt = <1049692>;
+};
+
+&ppvar_centerlogic {
+	regulator-min-microvolt = <800069>;
+	regulator-max-microvolt = <1049692>;
+	ctrl-voltage-range = <800069 1049692>;
+};
+
 &saradc {
 	status = "okay";
 	vref-supply = <&pp1800_ap_io>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
index eb5059344023..199a5118b20d 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
@@ -164,14 +164,9 @@
 		vin-supply = <&ppvar_sys>;
 	};
 
-	ppvar_bigcpu: ppvar-bigcpu {
+	ppvar_bigcpu_pwm: ppvar-bigcpu-pwm {
 		compatible = "pwm-regulator";
-		regulator-name = "ppvar_bigcpu";
-		/*
-		 * OVP circuit requires special handling which is not yet
-		 * represented. Keep disabled for now.
-		 */
-		status = "disabled";
+		regulator-name = "ppvar_bigcpu_pwm";
 
 		pwms = <&pwm1 0 3337 0>;
 		pwm-supply = <&ppvar_sys>;
@@ -181,18 +176,28 @@
 		/* EC turns on w/ ap_core_en; always on for AP */
 		regulator-always-on;
 		regulator-boot-on;
-		regulator-min-microvolt = <798674>;
-		regulator-max-microvolt = <1302172>;
+		regulator-min-microvolt = <800107>;
+		regulator-max-microvolt = <1302232>;
 	};
 
-	ppvar_litcpu: ppvar-litcpu {
+	ppvar_bigcpu: ppvar-bigcpu {
+		compatible = "vctrl-regulator";
+		regulator-name = "ppvar_bigcpu";
+
+		regulator-min-microvolt = <800107>;
+		regulator-max-microvolt = <1302232>;
+
+		ctrl-supply = <&ppvar_bigcpu_pwm>;
+		ctrl-voltage-range = <800107 1302232>;
+
+		regulator-settling-time-up-us = <322>;
+		min-slew-down-rate = <225>;
+		ovp-threshold-percent = <16>;
+	};
+
+	ppvar_litcpu_pwm: ppvar-litcpu-pwm {
 		compatible = "pwm-regulator";
-		regulator-name = "ppvar_litcpu";
-		/*
-		 * OVP circuit requires special handling which is not yet
-		 * represented. Keep disabled for now.
-		 */
-		status = "disabled";
+		regulator-name = "ppvar_litcpu_pwm";
 
 		pwms = <&pwm2 0 3337 0>;
 		pwm-supply = <&ppvar_sys>;
@@ -202,18 +207,28 @@
 		/* EC turns on w/ ap_core_en; always on for AP */
 		regulator-always-on;
 		regulator-boot-on;
-		regulator-min-microvolt = <799065>;
-		regulator-max-microvolt = <1303738>;
+		regulator-min-microvolt = <797743>;
+		regulator-max-microvolt = <1307837>;
 	};
 
-	ppvar_gpu: ppvar-gpu {
+	ppvar_litcpu: ppvar-litcpu {
+		compatible = "vctrl-regulator";
+		regulator-name = "ppvar_litcpu";
+
+		regulator-min-microvolt = <797743>;
+		regulator-max-microvolt = <1307837>;
+
+		ctrl-supply = <&ppvar_litcpu_pwm>;
+		ctrl-voltage-range = <797743 1307837>;
+
+		regulator-settling-time-up-us = <384>;
+		min-slew-down-rate = <225>;
+		ovp-threshold-percent = <16>;
+	};
+
+	ppvar_gpu_pwm: ppvar-gpu-pwm {
 		compatible = "pwm-regulator";
-		regulator-name = "ppvar_gpu";
-		/*
-		 * OVP circuit requires special handling which is not yet
-		 * represented. Keep disabled for now.
-		 */
-		status = "disabled";
+		regulator-name = "ppvar_gpu_pwm";
 
 		pwms = <&pwm0 0 3337 0>;
 		pwm-supply = <&ppvar_sys>;
@@ -223,18 +238,28 @@
 		/* EC turns on w/ ap_core_en; always on for AP */
 		regulator-always-on;
 		regulator-boot-on;
-		regulator-min-microvolt = <785782>;
-		regulator-max-microvolt = <1217729>;
+		regulator-min-microvolt = <786384>;
+		regulator-max-microvolt = <1217747>;
 	};
 
-	ppvar_centerlogic: ppvar-centerlogic {
+	ppvar_gpu: ppvar-gpu {
+		compatible = "vctrl-regulator";
+		regulator-name = "ppvar_gpu";
+
+		regulator-min-microvolt = <786384>;
+		regulator-max-microvolt = <1217747>;
+
+		ctrl-supply = <&ppvar_gpu_pwm>;
+		ctrl-voltage-range = <786384 1217747>;
+
+		regulator-settling-time-up-us = <390>;
+		min-slew-down-rate = <225>;
+		ovp-threshold-percent = <16>;
+	};
+
+	ppvar_centerlogic_pwm: ppvar-centerlogic-pwm {
 		compatible = "pwm-regulator";
-		regulator-name = "ppvar_centerlogic";
-		/*
-		 * OVP circuit requires special handling which is not yet
-		 * represented. Keep disabled for now.
-		 */
-		status = "disabled";
+		regulator-name = "ppvar_centerlogic_pwm";
 
 		pwms = <&pwm3 0 3337 0>;
 		pwm-supply = <&ppvar_sys>;
@@ -244,8 +269,23 @@
 		/* EC turns on w/ ppvar_centerlogic_en; always on for AP */
 		regulator-always-on;
 		regulator-boot-on;
-		regulator-min-microvolt = <800069>;
-		regulator-max-microvolt = <1049692>;
+		regulator-min-microvolt = <799434>;
+		regulator-max-microvolt = <1049925>;
+	};
+
+	ppvar_centerlogic: ppvar-centerlogic {
+		compatible = "vctrl-regulator";
+		regulator-name = "ppvar_centerlogic";
+
+		regulator-min-microvolt = <799434>;
+		regulator-max-microvolt = <1049925>;
+
+		ctrl-supply = <&ppvar_centerlogic_pwm>;
+		ctrl-voltage-range = <799434 1049925>;
+
+		regulator-settling-time-up-us = <378>;
+		min-slew-down-rate = <225>;
+		ovp-threshold-percent = <16>;
 	};
 
 	/* Schematics call this PPVAR even though it's fixed */
@@ -555,6 +595,11 @@
 	status = "okay";
 };
 
+&gpu {
+	mali-supply = <&ppvar_gpu>;
+	status = "okay";
+};
+
 ap_i2c_mic: &i2c1 {
 	status = "okay";
 
@@ -567,12 +612,7 @@ ap_i2c_mic: &i2c1 {
 	headsetcodec: rt5514@57 {
 		compatible = "realtek,rt5514";
 		reg = <0x57>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&mic_int>;
-		realtek,dmic-init-delay = <20>;
-		wakeup-source;
+		realtek,dmic-init-delay-ms = <20>;
 	};
 };
 
@@ -781,9 +821,13 @@ ap_i2c_audio: &i2c8 {
 	wacky_spi_audio: spi2@0 {
 		compatible = "realtek,rt5514";
 		reg = <0>;
-
+		interrupt-parent = <&gpio1>;
+		interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mic_int>;
 		/* May run faster once verified. */
 		spi-max-frequency = <10000000>;
+		wakeup-source;
 	};
 };
 
@@ -1031,7 +1075,7 @@ ap_i2c_audio: &i2c8 {
 		 * hurt and dw_mmc will ignore it.  We make sure to disable
 		 * the pull though so we don't burn needless power.
 		 */
-		sdmmc_cd: sdmcc-cd {
+		sdmmc_cd: sdmmc-cd {
 			rockchip,pins =
 				<0 7 RK_FUNC_1 &pcfg_pull_none>;
 		};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi
index be7fe635f7c1..d8a120f945c8 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi
@@ -118,6 +118,35 @@
 			opp-microvolt = <1250000>;
 		};
 	};
+
+	gpu_opp_table: opp-table2 {
+		compatible = "operating-points-v2";
+
+		opp00 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-microvolt = <800000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <297000000>;
+			opp-microvolt = <800000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <825000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <850000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <925000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <1075000>;
+		};
+	};
 };
 
 &cpu_l0 {
@@ -143,3 +172,7 @@
 &cpu_b1 {
 	operating-points-v2 = <&cluster1_opp>;
 };
+
+&gpu {
+	operating-points-v2 = <&gpu_opp_table>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi
index c83460db130a..81617bcf2522 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi
@@ -110,6 +110,35 @@
 			opp-microvolt = <1200000>;
 		};
 	};
+
+	gpu_opp_table: opp-table2 {
+		compatible = "operating-points-v2";
+
+		opp00 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-microvolt = <800000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <297000000>;
+			opp-microvolt = <800000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <825000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <875000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <925000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <1100000>;
+		};
+	};
 };
 
 &cpu_l0 {
@@ -135,3 +164,7 @@
 &cpu_b1 {
 	operating-points-v2 = <&cluster1_opp>;
 };
+
+&gpu {
+	operating-points-v2 = <&gpu_opp_table>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
new file mode 100644
index 000000000000..9a7486058455
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
@@ -0,0 +1,228 @@
+/*
+ * Copyright (c) 2017 Theobroma Systems Design und Consulting GmbH
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "rk3399-puma.dtsi"
+
+/ {
+	model = "Theobroma Systems RK3399-Q7 SoM";
+	compatible = "tsd,rk3399-puma-haikou", "rockchip,rk3399";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		pinctrl-0 = <&led_pin_module>, <&led_sd_haikou>;
+
+		sd-card-led {
+			label = "sd_card_led";
+			gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+		};
+	};
+
+	dc_12v: dc-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "dc_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc3v3_baseboard: vcc3v3-baseboard {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_baseboard";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc5v0_otg: vcc5v0-otg-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&otg_vbus_drv>;
+		regulator-name = "vcc5v0_otg";
+		regulator-always-on;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+};
+
+&i2c2 {
+	status = "okay";
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	i2c-scl-rising-time-ns = <450>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+	clock-frequency = <400000>;
+};
+
+&i2c6 {
+	status = "okay";
+	clock-frequency = <400000>;
+};
+
+&i2s0 {
+	status = "okay";
+	rockchip,playback-channels = <8>;
+	rockchip,capture-channels = <8>;
+	#sound-dai-cells = <0>;
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&pcie0 {
+	ep-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_LOW>;
+	num-lanes = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_clkreqn_cpm>;
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&haikou_pin_hog>;
+
+	hog {
+		haikou_pin_hog: haikou-pin-hog {
+			rockchip,pins =
+			  /* LID_BTN */
+			  <RK_GPIO0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
+			  /* BATLOW# */
+			  <RK_GPIO0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>,
+			  /* SLP_BTN# */
+			  <RK_GPIO0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>,
+			  /* BIOS_DISABLE# */
+			  <RK_GPIO0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	leds {
+		led_sd_haikou: led-sd-gpio {
+			rockchip,pins =
+			  <RK_GPIO1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb2 {
+		otg_vbus_drv: otg-vbus-drv {
+			rockchip,pins =
+			  <RK_GPIO0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	max-frequency = <150000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+	vmmc-supply = <&vcc3v3_baseboard>;
+	status = "okay";
+};
+
+&spi5 {
+	status = "okay";
+};
+
+&u2phy0 {
+	status = "okay";
+};
+
+&usbdrd3_0 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&u2phy0_host {
+	phy-supply = <&vcc5v0_otg>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
new file mode 100644
index 000000000000..53ff3d191a1d
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
@@ -0,0 +1,547 @@
+/*
+ * Copyright (c) 2017 Theobroma Systems Design und Consulting GmbH
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pin_module>;
+
+		module-led {
+			label = "module_led";
+			gpios = <&gpio2 RK_PD1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			panic-indicator;
+		};
+	};
+
+	/*
+	 * Overwrite the opp-table for CPUB as this board uses a different
+	 * regulator (FAN53555) that only allows 10mV steps and therefore
+	 * can't reach the operation point target voltages from rk3399-opp.dtsi
+	 */
+	/delete-node/ opp-table1;
+	cluster1_opp: opp-table1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp00 {
+			opp-hz = /bits/ 64 <408000000>;
+			opp-microvolt = <800000>;
+			clock-latency-ns = <40000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <800000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <830000>;
+			opp-suspend;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <880000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <950000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <1416000000>;
+			opp-microvolt = <1030000>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <1608000000>;
+			opp-microvolt = <1100000>;
+		};
+		opp07 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <1200000>;
+		};
+		opp08 {
+			opp-hz = /bits/ 64 <1992000000>;
+			opp-microvolt = <1230000>;
+			turbo-mode;
+		};
+	};
+
+	clkin_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "clkin_gmac";
+		#clock-cells = <0>;
+	};
+
+	vcc1v2_phy: vcc1v2-phy {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v2_phy";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_host: vcc5v0-host-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>;
+		enable-active-low;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host_en>;
+		regulator-name = "vcc5v0_host";
+		regulator-always-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vdd_log: vdd-log {
+		compatible = "pwm-regulator";
+		pwms = <&pwm2 0 25000 0>;
+		regulator-name = "vdd_log";
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1400000>;
+		regulator-always-on;
+		regulator-boot-on;
+		status = "okay";
+	};
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&emmc_phy {
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_RMII_SRC>;
+	assigned-clock-parents = <&clkin_gmac>;
+	clock_in_out = "input";
+	phy-supply = <&vcc1v2_phy>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	tx_delay = <0x10>;
+	rx_delay = <0x10>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	i2c-scl-rising-time-ns = <168>;
+	i2c-scl-falling-time-ns = <4>;
+	clock-frequency = <400000>;
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <22 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc5v0_sys>;
+		vcc12-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc1v8_pmu>;
+
+		regulators {
+			vdd_center: DCDC_REG1 {
+				regulator-name = "vdd_center";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_l: DCDC_REG2 {
+				regulator-name = "vdd_cpu_l";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG4 {
+				regulator-name = "vcc_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_ldo1: LDO_REG1 {
+				regulator-name = "vcc_ldo1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8_hdmi: LDO_REG2 {
+				regulator-name = "vcc1v8_hdmi";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8_pmu: LDO_REG3 {
+				regulator-name = "vcc1v8_pmu";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_sd: LDO_REG4 {
+				regulator-name = "vcc_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_ldo5: LDO_REG5 {
+				regulator-name = "vcc_ldo5";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ldo6: LDO_REG6 {
+				regulator-name = "vcc_ldo6";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc0v9_hdmi: LDO_REG7 {
+				regulator-name = "vcc0v9_hdmi";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_efuse: LDO_REG8 {
+				regulator-name = "vcc_efuse";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_s3: SWITCH_REG1 {
+				regulator-name = "vcc3v3_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_s0: SWITCH_REG2 {
+				regulator-name = "vcc3v3_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+
+	vdd_gpu: regulator@60 {
+		compatible = "fcs,fan53555";
+		reg = <0x60>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_gpu";
+		regulator-min-microvolt = <600000>;
+		regulator-max-microvolt = <1230000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	fan: fan@18 {
+		compatible = "ti,amc6821";
+		reg = <0x18>;
+		cooling-min-state = <0>;
+		cooling-max-state = <9>;
+		#cooling-cells = <2>;
+	};
+
+	rtc_twi: rtc@6f {
+		compatible = "isil,isl1208";
+		reg = <0x6f>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	vdd_cpu_b: regulator@60 {
+		compatible = "fcs,fan53555";
+		reg = <0x60>;
+		vin-supply = <&vcc5v0_sys>;
+		regulator-name = "vdd_cpu_b";
+		regulator-min-microvolt = <600000>;
+		regulator-max-microvolt = <1230000>;
+		regulator-ramp-delay = <1000>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&io_domains {
+	status = "okay";
+	bt656-supply = <&vcc_1v8>;
+	audio-supply = <&vcc_1v8>;
+	sdmmc-supply = <&vcc_sd>;
+	gpio1830-supply = <&vcc_1v8>;
+};
+
+&pmu_io_domains {
+	status = "okay";
+	pmu1830-supply = <&vcc_1v8>;
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&pinctrl {
+	i2c8 {
+		i2c8_xfer_a: i2c8-xfer {
+			rockchip,pins =
+			  <RK_GPIO1 RK_PC4 RK_FUNC_1 &pcfg_pull_up>,
+			  <RK_GPIO1 RK_PC5 RK_FUNC_1 &pcfg_pull_up>;
+		};
+	};
+
+	leds {
+		led_pin_module: led-module-gpio {
+			rockchip,pins =
+			  <RK_GPIO2 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins =
+			  <RK_GPIO1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb2 {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins =
+			  <RK_GPIO4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	non-removable;
+	status = "okay";
+};
+
+&sdmmc {
+	vqmmc = <&vcc_sd>;
+};
+
+&spi1 {
+	status = "okay";
+
+	norflash: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&u2phy1 {
+	status = "okay";
+
+	u2phy1_otg: otg-port {
+		status = "okay";
+	};
+
+	u2phy1_host: host-port {
+		phy-supply = <&vcc5v0_host>;
+		status = "okay";
+	};
+};
+
+&usbdrd3_1 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts
new file mode 100644
index 000000000000..b7bd88fb3ae3
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts
@@ -0,0 +1,240 @@
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "rk3399-sapphire.dtsi"
+
+/ {
+	model = "Excavator-RK3399 Board";
+	compatible = "rockchip,rk3399-sapphire-excavator", "rockchip,rk3399";
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 1>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <100>;
+
+		button-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			press-threshold-microvolt = <100000>;
+		};
+
+		button-down {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			press-threshold-microvolt = <300000>;
+		};
+
+		back {
+			label = "Back";
+			linux,code = <KEY_BACK>;
+			press-threshold-microvolt = <985000>;
+		};
+
+		menu {
+			label = "Menu";
+			linux,code = <KEY_MENU>;
+			press-threshold-microvolt = <1314000>;
+		};
+	};
+
+	edp_panel: edp-panel {
+		compatible ="lg,lp079qx1-sp0v", "simple-panel";
+		backlight = <&backlight>;
+		enable-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_panel_reset>;
+		power-supply = <&vcc3v3_s0>;
+
+		ports {
+			panel_in_edp: endpoint {
+				remote-endpoint = <&edp_out_panel>;
+			};
+		};
+	};
+
+	keys: gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		power {
+			debounce-interval = <100>;
+			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "GPIO Power";
+			linux,code = <KEY_POWER>;
+			linux,input-type = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pwr_btn>;
+			wakeup-source;
+		};
+	};
+
+	rt5651-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "realtek,rt5651-codec";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"Mic Jack", "MICBIAS1",
+			"IN1P", "Mic Jack",
+			"Headphone Jack", "HPOL",
+			"Headphone Jack", "HPOR";
+		simple-audio-card,cpu {
+			sound-dai = <&i2s0>;
+		};
+		simple-audio-card,codec {
+			sound-dai = <&rt5651>;
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk808 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+
+		/*
+		 * On the module itself this is one of these (depending
+		 * on the actual card populated):
+		 * - SDIO_RESET_L_WL_REG_ON
+		 * - PDN (power down when low)
+		 */
+		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&backlight {
+	enable-gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&edp {
+	status = "okay";
+
+	ports {
+		edp_out: port@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			edp_out_panel: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&panel_in_edp>;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	i2c-scl-rising-time-ns = <300>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+
+	rt5651: rt5651@1a {
+		compatible = "rockchip,rt5651";
+		reg = <0x1a>;
+		clocks = <&cru SCLK_I2S_8CH_OUT>;
+		clock-names = "mclk";
+		hp-det-gpio = <&gpio4 RK_PC4 GPIO_ACTIVE_LOW>;
+		spk-con-gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
+		#sound-dai-cells = <0>;
+	};
+};
+
+&i2c4 {
+	i2c-scl-rising-time-ns = <600>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+
+	accelerometer@68 {
+		compatible = "invensense,mpu6500";
+		reg = <0x68>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <RK_PC6 IRQ_TYPE_EDGE_RISING>;
+	};
+};
+
+&i2s0 {
+	rockchip,playback-channels = <8>;
+	rockchip,capture-channels = <8>;
+	#sound-dai-cells = <0>;
+	status = "okay";
+};
+
+&i2s2 {
+	#sound-dai-cells = <0>;
+	status = "okay";
+};
+
+&pinctrl {
+	buttons {
+		pwr_btn: pwr-btn {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	lcd-panel {
+		lcd_panel_reset: lcd-panel-reset {
+			rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&spdif {
+	i2c-scl-rising-time-ns = <450>;
+	i2c-scl-falling-time-ns = <15>;
+	#sound-dai-cells = <0>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
new file mode 100644
index 000000000000..6c30bb02210d
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
@@ -0,0 +1,644 @@
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "dt-bindings/pwm/pwm.h"
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+	compatible = "rockchip,rk3399-sapphire", "rockchip,rk3399";
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <
+			  0   1   2   3   4   5   6   7
+			  8   9  10  11  12  13  14  15
+			 16  17  18  19  20  21  22  23
+			 24  25  26  27  28  29  30  31
+			 32  33  34  35  36  37  38  39
+			 40  41  42  43  44  45  46  47
+			 48  49  50  51  52  53  54  55
+			 56  57  58  59  60  61  62  63
+			 64  65  66  67  68  69  70  71
+			 72  73  74  75  76  77  78  79
+			 80  81  82  83  84  85  86  87
+			 88  89  90  91  92  93  94  95
+			 96  97  98  99 100 101 102 103
+			104 105 106 107 108 109 110 111
+			112 113 114 115 116 117 118 119
+			120 121 122 123 124 125 126 127
+			128 129 130 131 132 133 134 135
+			136 137 138 139 140 141 142 143
+			144 145 146 147 148 149 150 151
+			152 153 154 155 156 157 158 159
+			160 161 162 163 164 165 166 167
+			168 169 170 171 172 173 174 175
+			176 177 178 179 180 181 182 183
+			184 185 186 187 188 189 190 191
+			192 193 194 195 196 197 198 199
+			200 201 202 203 204 205 206 207
+			208 209 210 211 212 213 214 215
+			216 217 218 219 220 221 222 223
+			224 225 226 227 228 229 230 231
+			232 233 234 235 236 237 238 239
+			240 241 242 243 244 245 246 247
+			248 249 250 251 252 253 254 255>;
+		default-brightness-level = <200>;
+		pwms = <&pwm0 0 25000 0>;
+	};
+
+	clkin_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "clkin_gmac";
+		#clock-cells = <0>;
+	};
+
+	dc_12v: dc-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "dc_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	/* switched by pmic_sleep */
+	vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v8_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_1v8>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc_sys: vcc-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc5v0_host: vcc5v0-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PD1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host_en>;
+		regulator-name = "vcc5v0_host";
+		regulator-always-on;
+		vin-supply = <&vcc_sys>;
+	};
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&emmc_phy {
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_RMII_SRC>;
+	assigned-clock-parents = <&clkin_gmac>;
+	clock_in_out = "input";
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	tx_delay = <0x28>;
+	rx_delay = <0x11>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	i2c-scl-rising-time-ns = <168>;
+	i2c-scl-falling-time-ns = <4>;
+	status = "okay";
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l &pmic_dvs2>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc6-supply = <&vcc_sys>;
+		vcc7-supply = <&vcc_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc_sys>;
+		vcc10-supply = <&vcc_sys>;
+		vcc11-supply = <&vcc_sys>;
+		vcc12-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc1v8_pmu>;
+
+		regulators {
+			vdd_center: DCDC_REG1 {
+				regulator-name = "vdd_center";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_l: DCDC_REG2 {
+				regulator-name = "vdd_cpu_l";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG4 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc1v8_dvp: LDO_REG1 {
+				regulator-name = "vcc1v8_dvp";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v0_tp: LDO_REG2 {
+				regulator-name = "vcc3v0_tp";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8_pmu: LDO_REG3 {
+				regulator-name = "vcc1v8_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_sdio: LDO_REG4 {
+				regulator-name = "vcc_sdio";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcca3v0_codec: LDO_REG5 {
+				regulator-name = "vcca3v0_codec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v5: LDO_REG6 {
+				regulator-name = "vcc_1v5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1500000>;
+				};
+			};
+
+			vcca1v8_codec: LDO_REG7 {
+				regulator-name = "vcca1v8_codec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v0: LDO_REG8 {
+				regulator-name = "vcc_3v0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc3v3_s3: vcc_lan: SWITCH_REG1 {
+				regulator-name = "vcc3v3_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_s0: SWITCH_REG2 {
+				regulator-name = "vcc3v3_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+
+	vdd_cpu_b: regulator@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_b";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_gpu: regulator@41 {
+		compatible = "silergy,syr828";
+		reg = <0x41>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_gpu";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_log: vdd-log {
+		compatible = "pwm-regulator";
+		pwms = <&pwm2 0 25000 1>;
+		regulator-name = "vdd_log";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1400000>;
+		vin-supply = <&vcc_sys>;
+	};
+};
+
+&i2c3 {
+	i2c-scl-rising-time-ns = <450>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+};
+
+&io_domains {
+	status = "okay";
+
+	bt656-supply = <&vcc_3v0>;
+	audio-supply = <&vcca1v8_codec>;
+	sdmmc-supply = <&vcc_sdio>;
+	gpio1830-supply = <&vcc_3v0>;
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&pcie0 {
+	assigned-clocks = <&cru SCLK_PCIEPHY_REF>;
+	assigned-clock-parents = <&cru SCLK_PCIEPHY_REF100M>;
+	assigned-clock-rates = <100000000>;
+	ep-gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_HIGH>;
+	num-lanes = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_clkreqn_cpm>;
+	status = "okay";
+};
+
+&pmu_io_domains {
+	pmu1830-supply = <&vcc_3v0>;
+	status = "okay";
+};
+
+&pinctrl {
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins =
+				<1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		pmic_dvs2: pmic-dvs2 {
+			rockchip,pins =
+				<1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		vsel1_gpio: vsel1-gpio {
+			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		vsel2_gpio: vsel2-gpio {
+			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	usb2 {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins =
+				<4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcca1v8_s3>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	keep-power-in-suspend;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	non-removable;
+	status = "okay";
+};
+
+&sdio0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	clock-frequency = <50000000>;
+	disable-wp;
+	keep-power-in-suspend;
+	max-frequency = <50000000>;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	clock-frequency = <150000000>;
+	disable-wp;
+	max-frequency = <150000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+	vqmmc-supply = <&vcc_sdio>;
+	status = "okay";
+};
+
+&tsadc {
+	/* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-mode = <1>;
+	/* tshut polarity 0:LOW 1:HIGH */
+	rockchip,hw-tshut-polarity = <1>;
+	status = "okay";
+};
+
+&u2phy0 {
+	status = "okay";
+
+	u2phy0_otg: otg-port {
+		status = "okay";
+	};
+
+	u2phy0_host: host-port {
+		phy-supply = <&vcc5v0_host>;
+		status = "okay";
+	};
+};
+
+&u2phy1 {
+	status = "okay";
+
+	u2phy1_otg: otg-port {
+		status = "okay";
+	};
+
+	u2phy1_host: host-port {
+		phy-supply = <&vcc5v0_host>;
+		status = "okay";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usbdrd3_0 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	status = "okay";
+	dr_mode = "otg";
+};
+
+&usbdrd3_1 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index 5b78ce16a87e..d79e9b3265b9 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -110,6 +110,7 @@
 			enable-method = "psci";
 			#cooling-cells = <2>; /* min followed by max */
 			clocks = <&cru ARMCLKL>;
+			dynamic-power-coefficient = <100>;
 		};
 
 		cpu_l1: cpu@1 {
@@ -118,6 +119,7 @@
 			reg = <0x0 0x1>;
 			enable-method = "psci";
 			clocks = <&cru ARMCLKL>;
+			dynamic-power-coefficient = <100>;
 		};
 
 		cpu_l2: cpu@2 {
@@ -126,6 +128,7 @@
 			reg = <0x0 0x2>;
 			enable-method = "psci";
 			clocks = <&cru ARMCLKL>;
+			dynamic-power-coefficient = <100>;
 		};
 
 		cpu_l3: cpu@3 {
@@ -134,6 +137,7 @@
 			reg = <0x0 0x3>;
 			enable-method = "psci";
 			clocks = <&cru ARMCLKL>;
+			dynamic-power-coefficient = <100>;
 		};
 
 		cpu_b0: cpu@100 {
@@ -143,6 +147,7 @@
 			enable-method = "psci";
 			#cooling-cells = <2>; /* min followed by max */
 			clocks = <&cru ARMCLKB>;
+			dynamic-power-coefficient = <436>;
 		};
 
 		cpu_b1: cpu@101 {
@@ -151,9 +156,15 @@
 			reg = <0x0 0x101>;
 			enable-method = "psci";
 			clocks = <&cru ARMCLKB>;
+			dynamic-power-coefficient = <436>;
 		};
 	};
 
+	display-subsystem {
+		compatible = "rockchip,display-subsystem";
+		ports = <&vopl_out>, <&vopb_out>;
+	};
+
 	pmu_a53 {
 		compatible = "arm,cortex-a53-pmu";
 		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster0>;
@@ -289,6 +300,7 @@
 			 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
 		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		fifo-depth = <0x100>;
+		power-domains = <&power RK3399_PD_SDIOAUDIO>;
 		resets = <&cru SRST_SDIO0>;
 		reset-names = "reset";
 		status = "disabled";
@@ -402,6 +414,7 @@
 			snps,dis-u2-freeclk-exists-quirk;
 			snps,dis_u2_susphy_quirk;
 			snps,dis-del-phy-power-chg-quirk;
+			snps,dis-tx-ipgap-linecheck-quirk;
 			status = "disabled";
 		};
 	};
@@ -429,6 +442,7 @@
 			snps,dis-u2-freeclk-exists-quirk;
 			snps,dis_u2_susphy_quirk;
 			snps,dis-del-phy-power-chg-quirk;
+			snps,dis-tx-ipgap-linecheck-quirk;
 			status = "disabled";
 		};
 	};
@@ -678,6 +692,7 @@
 		interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH 0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi5_clk &spi5_tx &spi5_rx &spi5_cs0>;
+		power-domains = <&power RK3399_PD_SDIOAUDIO>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		status = "disabled";
@@ -950,6 +965,10 @@
 			};
 
 			/* These power domains are grouped by VD_LOGIC */
+			pd_edp@RK3399_PD_EDP {
+				reg = <RK3399_PD_EDP>;
+				clocks = <&cru PCLK_EDP_CTRL>;
+			};
 			pd_emmc@RK3399_PD_EMMC {
 				reg = <RK3399_PD_EMMC>;
 				clocks = <&cru ACLK_EMMC>;
@@ -967,6 +986,11 @@
 					 <&cru SCLK_SDMMC>;
 				pm_qos = <&qos_sd>;
 			};
+			pd_sdioaudio@RK3399_PD_SDIOAUDIO {
+				reg = <RK3399_PD_SDIOAUDIO>;
+				clocks = <&cru HCLK_SDIO>;
+				pm_qos = <&qos_sdioaudio>;
+			};
 			pd_vio@RK3399_PD_VIO {
 				reg = <RK3399_PD_VIO>;
 				#address-cells = <1>;
@@ -1153,6 +1177,33 @@
 		status = "disabled";
 	};
 
+	vpu_mmu: iommu@ff650800 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff650800 0x0 0x40>;
+		interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "vpu_mmu";
+		#iommu-cells = <0>;
+		status = "disabled";
+	};
+
+	vdec_mmu: iommu@ff660480 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff660480 0x0 0x40>, <0x0 0xff6604c0 0x0 0x40>;
+		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "vdec_mmu";
+		#iommu-cells = <0>;
+		status = "disabled";
+	};
+
+	iep_mmu: iommu@ff670800 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff670800 0x0 0x40>;
+		interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "iep_mmu";
+		#iommu-cells = <0>;
+		status = "disabled";
+	};
+
 	efuse0: efuse@ff690000 {
 		compatible = "rockchip,rk3399-efuse";
 		reg = <0x0 0xff690000 0x0 0x80>;
@@ -1387,6 +1438,7 @@
 		clocks = <&cru SCLK_SPDIF_8CH>, <&cru HCLK_SPDIF>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&spdif_bus>;
+		power-domains = <&power RK3399_PD_SDIOAUDIO>;
 		status = "disabled";
 	};
 
@@ -1401,6 +1453,7 @@
 		clocks = <&cru SCLK_I2S0_8CH>, <&cru HCLK_I2S0_8CH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2s0_8ch_bus>;
+		power-domains = <&power RK3399_PD_SDIOAUDIO>;
 		status = "disabled";
 	};
 
@@ -1414,6 +1467,7 @@
 		clocks = <&cru SCLK_I2S1_8CH>, <&cru HCLK_I2S1_8CH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2s1_2ch_bus>;
+		power-domains = <&power RK3399_PD_SDIOAUDIO>;
 		status = "disabled";
 	};
 
@@ -1425,6 +1479,224 @@
 		dma-names = "tx", "rx";
 		clock-names = "i2s_clk", "i2s_hclk";
 		clocks = <&cru SCLK_I2S2_8CH>, <&cru HCLK_I2S2_8CH>;
+		power-domains = <&power RK3399_PD_SDIOAUDIO>;
+		status = "disabled";
+	};
+
+	vopl: vop@ff8f0000 {
+		compatible = "rockchip,rk3399-vop-lit";
+		reg = <0x0 0xff8f0000 0x0 0x3efc>;
+		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH 0>;
+		assigned-clocks = <&cru ACLK_VOP1>, <&cru HCLK_VOP1>;
+		assigned-clock-rates = <400000000>, <100000000>;
+		clocks = <&cru ACLK_VOP1>, <&cru DCLK_VOP1>, <&cru HCLK_VOP1>;
+		clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+		iommus = <&vopl_mmu>;
+		power-domains = <&power RK3399_PD_VOPL>;
+		resets = <&cru SRST_A_VOP1>, <&cru SRST_H_VOP1>, <&cru SRST_D_VOP1>;
+		reset-names = "axi", "ahb", "dclk";
+		status = "disabled";
+
+		vopl_out: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			vopl_out_mipi: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&mipi_in_vopl>;
+			};
+
+			vopl_out_edp: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&edp_in_vopl>;
+			};
+
+			vopl_out_hdmi: endpoint@2 {
+				reg = <2>;
+				remote-endpoint = <&hdmi_in_vopl>;
+			};
+		};
+	};
+
+	vopl_mmu: iommu@ff8f3f00 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff8f3f00 0x0 0x100>;
+		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "vopl_mmu";
+		clocks = <&cru ACLK_VOP1>, <&cru HCLK_VOP1>;
+		clock-names = "aclk", "hclk";
+		power-domains = <&power RK3399_PD_VOPL>;
+		#iommu-cells = <0>;
+		status = "disabled";
+	};
+
+	vopb: vop@ff900000 {
+		compatible = "rockchip,rk3399-vop-big";
+		reg = <0x0 0xff900000 0x0 0x3efc>;
+		interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH 0>;
+		assigned-clocks = <&cru ACLK_VOP0>, <&cru HCLK_VOP0>;
+		assigned-clock-rates = <400000000>, <100000000>;
+		clocks = <&cru ACLK_VOP0>, <&cru DCLK_VOP0>, <&cru HCLK_VOP0>;
+		clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+		iommus = <&vopb_mmu>;
+		power-domains = <&power RK3399_PD_VOPB>;
+		resets = <&cru SRST_A_VOP0>, <&cru SRST_H_VOP0>, <&cru SRST_D_VOP0>;
+		reset-names = "axi", "ahb", "dclk";
+		status = "disabled";
+
+		vopb_out: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			vopb_out_edp: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&edp_in_vopb>;
+			};
+
+			vopb_out_mipi: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&mipi_in_vopb>;
+			};
+
+			vopb_out_hdmi: endpoint@2 {
+				reg = <2>;
+				remote-endpoint = <&hdmi_in_vopb>;
+			};
+		};
+	};
+
+	vopb_mmu: iommu@ff903f00 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff903f00 0x0 0x100>;
+		interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "vopb_mmu";
+		clocks = <&cru ACLK_VOP0>, <&cru HCLK_VOP0>;
+		clock-names = "aclk", "hclk";
+		power-domains = <&power RK3399_PD_VOPB>;
+		#iommu-cells = <0>;
+		status = "disabled";
+	};
+
+	isp0_mmu: iommu@ff914000 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff914000 0x0 0x100>, <0x0 0xff915000 0x0 0x100>;
+		interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "isp0_mmu";
+		#iommu-cells = <0>;
+		rockchip,disable-mmu-reset;
+		status = "disabled";
+	};
+
+	isp1_mmu: iommu@ff924000 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff924000 0x0 0x100>, <0x0 0xff925000 0x0 0x100>;
+		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "isp1_mmu";
+		#iommu-cells = <0>;
+		rockchip,disable-mmu-reset;
+		status = "disabled";
+	};
+
+	hdmi: hdmi@ff940000 {
+		compatible = "rockchip,rk3399-dw-hdmi";
+		reg = <0x0 0xff940000 0x0 0x20000>;
+		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_SFR>, <&cru PLL_VPLL>, <&cru PCLK_VIO_GRF>;
+		clock-names = "iahb", "isfr", "vpll", "grf";
+		power-domains = <&power RK3399_PD_HDCP>;
+		reg-io-width = <4>;
+		rockchip,grf = <&grf>;
+		status = "disabled";
+
+		ports {
+			hdmi_in: port {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				hdmi_in_vopb: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vopb_out_hdmi>;
+				};
+				hdmi_in_vopl: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&vopl_out_hdmi>;
+				};
+			};
+		};
+	};
+
+	mipi_dsi: mipi@ff960000 {
+		compatible = "rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi";
+		reg = <0x0 0xff960000 0x0 0x8000>;
+		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru SCLK_MIPIDPHY_REF>, <&cru PCLK_MIPI_DSI0>,
+			 <&cru SCLK_DPHY_TX0_CFG>;
+		clock-names = "ref", "pclk", "phy_cfg";
+		power-domains = <&power RK3399_PD_VIO>;
+		rockchip,grf = <&grf>;
+		status = "disabled";
+
+		ports {
+			mipi_in: port {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mipi_in_vopb: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vopb_out_mipi>;
+				};
+				mipi_in_vopl: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&vopl_out_mipi>;
+				};
+			};
+		};
+	};
+
+	edp: edp@ff970000 {
+		compatible = "rockchip,rk3399-edp";
+		reg = <0x0 0xff970000 0x0 0x8000>;
+		interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru PCLK_EDP>, <&cru PCLK_EDP_CTRL>;
+		clock-names = "dp", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&edp_hpd>;
+		power-domains = <&power RK3399_PD_EDP>;
+		resets = <&cru SRST_P_EDP_CTRL>;
+		reset-names = "dp";
+		rockchip,grf = <&grf>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			edp_in: port@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				edp_in_vopb: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vopb_out_edp>;
+				};
+
+				edp_in_vopl: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&vopl_out_edp>;
+				};
+			};
+		};
+	};
+
+	gpu: gpu@ff9a0000 {
+		compatible = "rockchip,rk3399-mali", "arm,mali-t860";
+		reg = <0x0 0xff9a0000 0x0 0x10000>;
+		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "gpu", "job", "mmu";
+		clocks = <&cru ACLK_GPU>;
+		power-domains = <&power RK3399_PD_GPU>;
 		status = "disabled";
 	};
 
@@ -1788,7 +2060,7 @@
 					<4 RK_PB5 RK_FUNC_1 &pcfg_pull_up>;
 			};
 
-			sdmmc_cd: sdmcc-cd {
+			sdmmc_cd: sdmmc-cd {
 				rockchip,pins =
 					<0 RK_PA7 RK_FUNC_1 &pcfg_pull_up>;
 			};
@@ -2092,16 +2364,6 @@
 		};
 
 		pcie {
-			pcie_clkreqn: pci-clkreqn {
-				rockchip,pins =
-					<2 26 RK_FUNC_2 &pcfg_pull_none>;
-			};
-
-			pcie_clkreqnb: pci-clkreqnb {
-				rockchip,pins =
-					<4 24 RK_FUNC_1 &pcfg_pull_none>;
-			};
-
 			pcie_clkreqn_cpm: pci-clkreqn-cpm {
 				rockchip,pins =
 					<2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
diff --git a/arch/arm64/boot/dts/socionext/Makefile b/arch/arm64/boot/dts/socionext/Makefile
index 4a13a3a97101..4bc091b365fd 100644
--- a/arch/arm64/boot/dts/socionext/Makefile
+++ b/arch/arm64/boot/dts/socionext/Makefile
@@ -2,7 +2,8 @@ dtb-$(CONFIG_ARCH_UNIPHIER) += \
 	uniphier-ld11-global.dtb \
 	uniphier-ld11-ref.dtb \
 	uniphier-ld20-global.dtb \
-	uniphier-ld20-ref.dtb
+	uniphier-ld20-ref.dtb \
+	uniphier-pxs3-ref.dtb
 
 always		:= $(dtb-y)
 clean-files	:= *.dtb
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts b/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts
index 115357018ef7..2452b2243f42 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts
@@ -9,7 +9,7 @@
  */
 
 /dts-v1/;
-/include/ "uniphier-ld11.dtsi"
+#include "uniphier-ld11.dtsi"
 
 / {
 	model = "UniPhier LD11 Global Board (REF_LD11_GP)";
@@ -68,3 +68,7 @@
 &usb2 {
 	status = "okay";
 };
+
+&nand {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts
index cc8ebe34c27c..ffb473ad2e0f 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts
@@ -8,9 +8,9 @@
  */
 
 /dts-v1/;
-/include/ "uniphier-ld11.dtsi"
-/include/ "uniphier-ref-daughter.dtsi"
-/include/ "uniphier-support-card.dtsi"
+#include "uniphier-ld11.dtsi"
+#include "uniphier-ref-daughter.dtsi"
+#include "uniphier-support-card.dtsi"
 
 / {
 	model = "UniPhier LD11 Reference Board";
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi
index bdce5b89baec..ee4aff53a5f5 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi
@@ -150,6 +150,17 @@
 			clocks = <&peri_clk 3>;
 		};
 
+		adamv@57920000 {
+			compatible = "socionext,uniphier-ld11-adamv",
+				     "simple-mfd", "syscon";
+			reg = <0x57920000 0x1000>;
+
+			adamv_rst: reset {
+				compatible = "socionext,uniphier-ld11-adamv-reset";
+				#reset-cells = <1>;
+			};
+		};
+
 		i2c0: i2c@58780000 {
 			compatible = "socionext,uniphier-fi2c";
 			status = "disabled";
@@ -344,6 +355,13 @@
 			};
 		};
 
+		aidet: aidet@5fc20000 {
+			compatible = "socionext,uniphier-ld11-aidet";
+			reg = <0x5fc20000 0x200>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
 		gic: interrupt-controller@5fe00000 {
 			compatible = "arm,gic-v3";
 			reg = <0x5fe00000 0x10000>,	/* GICD */
@@ -367,8 +385,23 @@
 				compatible = "socionext,uniphier-ld11-reset";
 				#reset-cells = <1>;
 			};
+
+			watchdog {
+				compatible = "socionext,uniphier-wdt";
+			};
+		};
+
+		nand: nand@68000000 {
+			compatible = "socionext,uniphier-denali-nand-v5b";
+			status = "disabled";
+			reg-names = "nand_data", "denali_reg";
+			reg = <0x68000000 0x20>, <0x68100000 0x1000>;
+			interrupts = <0 65 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_nand>;
+			clocks = <&sys_clk 2>;
 		};
 	};
 };
 
-/include/ "uniphier-pinctrl.dtsi"
+#include "uniphier-pinctrl.dtsi"
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts
index 9f620d4101b5..fc2bc9d75d35 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts
@@ -9,7 +9,7 @@
  */
 
 /dts-v1/;
-/include/ "uniphier-ld20.dtsi"
+#include "uniphier-ld20.dtsi"
 
 / {
 	model = "UniPhier LD20 Global Board (REF_LD20_GP)";
@@ -50,3 +50,7 @@
 &i2c0 {
 	status = "okay";
 };
+
+&nand {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts
index 494166aee24c..1ca0c8620dc5 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts
@@ -8,9 +8,9 @@
  */
 
 /dts-v1/;
-/include/ "uniphier-ld20.dtsi"
-/include/ "uniphier-ref-daughter.dtsi"
-/include/ "uniphier-support-card.dtsi"
+#include "uniphier-ld20.dtsi"
+#include "uniphier-ref-daughter.dtsi"
+#include "uniphier-support-card.dtsi"
 
 / {
 	model = "UniPhier LD20 Reference Board";
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
index de1e75362817..a29c279b6e8e 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
@@ -219,6 +219,17 @@
 			clocks = <&peri_clk 3>;
 		};
 
+		adamv@57920000 {
+			compatible = "socionext,uniphier-ld20-adamv",
+				     "simple-mfd", "syscon";
+			reg = <0x57920000 0x1000>;
+
+			adamv_rst: reset {
+				compatible = "socionext,uniphier-ld20-adamv-reset";
+				#reset-cells = <1>;
+			};
+		};
+
 		i2c0: i2c@58780000 {
 			compatible = "socionext,uniphier-fi2c";
 			status = "disabled";
@@ -309,7 +320,7 @@
 		sdctrl@59810000 {
 			compatible = "socionext,uniphier-ld20-sdctrl",
 				     "simple-mfd", "syscon";
-			reg = <0x59810000 0x800>;
+			reg = <0x59810000 0x400>;
 
 			sd_clk: clock {
 				compatible = "socionext,uniphier-ld20-sd-clock";
@@ -365,6 +376,13 @@
 			};
 		};
 
+		aidet: aidet@5fc20000 {
+			compatible = "socionext,uniphier-ld20-aidet";
+			reg = <0x5fc20000 0x200>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
 		gic: interrupt-controller@5fe00000 {
 			compatible = "arm,gic-v3";
 			reg = <0x5fe00000 0x10000>,	/* GICD */
@@ -388,8 +406,23 @@
 				compatible = "socionext,uniphier-ld20-reset";
 				#reset-cells = <1>;
 			};
+
+			watchdog {
+				compatible = "socionext,uniphier-wdt";
+			};
+		};
+
+		nand: nand@68000000 {
+			compatible = "socionext,uniphier-denali-nand-v5b";
+			status = "disabled";
+			reg-names = "nand_data", "denali_reg";
+			reg = <0x68000000 0x20>, <0x68100000 0x1000>;
+			interrupts = <0 65 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_nand>;
+			clocks = <&sys_clk 2>;
 		};
 	};
 };
 
-/include/ "uniphier-pinctrl.dtsi"
+#include "uniphier-pinctrl.dtsi"
diff --git a/arch/arm64/boot/dts/socionext/uniphier-pinctrl.dtsi b/arch/arm64/boot/dts/socionext/uniphier-pinctrl.dtsi
index f42fb6f38bd3..9caabbb8bae3 120000..100644
--- a/arch/arm64/boot/dts/socionext/uniphier-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-pinctrl.dtsi
@@ -1 +1 @@
-../../../../arm/boot/dts/uniphier-pinctrl.dtsi
-\ No newline at end of file
+#include <arm/uniphier-pinctrl.dtsi>
diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts
new file mode 100644
index 000000000000..d65f746a3f9d
--- /dev/null
+++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts
@@ -0,0 +1,62 @@
+/*
+ * Device Tree Source for UniPhier PXs3 Reference Board
+ *
+ * Copyright (C) 2017 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+/dts-v1/;
+#include "uniphier-pxs3.dtsi"
+#include "uniphier-support-card.dtsi"
+
+/ {
+	model = "UniPhier PXs3 Reference Board";
+	compatible = "socionext,uniphier-pxs3-ref", "socionext,uniphier-pxs3";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c6 = &i2c6;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0 0x80000000 0 0xa0000000>;
+	};
+};
+
+&ethsc {
+	interrupts = <0 52 4>;
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
new file mode 100644
index 000000000000..384729fa740f
--- /dev/null
+++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
@@ -0,0 +1,367 @@
+/*
+ * Device Tree Source for UniPhier PXs3 SoC
+ *
+ * Copyright (C) 2017 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+/memreserve/ 0x80000000 0x02000000;
+
+/ {
+	compatible = "socionext,uniphier-pxs3";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0 0x000>;
+			clocks = <&sys_clk 33>;
+			enable-method = "psci";
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0 0x001>;
+			clocks = <&sys_clk 33>;
+			enable-method = "psci";
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0 0x002>;
+			clocks = <&sys_clk 33>;
+			enable-method = "psci";
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0 0x003>;
+			clocks = <&sys_clk 33>;
+			enable-method = "psci";
+			operating-points-v2 = <&cluster0_opp>;
+		};
+	};
+
+	cluster0_opp: opp_table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-250000000 {
+			opp-hz = /bits/ 64 <250000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-325000000 {
+			opp-hz = /bits/ 64 <325000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-650000000 {
+			opp-hz = /bits/ 64 <650000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-666667000 {
+			opp-hz = /bits/ 64 <666667000>;
+			clock-latency-ns = <300>;
+		};
+		opp-866667000 {
+			opp-hz = /bits/ 64 <866667000>;
+			clock-latency-ns = <300>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-1300000000 {
+			opp-hz = /bits/ 64 <1300000000>;
+			clock-latency-ns = <300>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	clocks {
+		refclk: ref {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <1 13 4>,
+			     <1 14 4>,
+			     <1 11 4>,
+			     <1 10 4>;
+	};
+
+	soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xffffffff>;
+
+		serial0: serial@54006800 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006800 0x40>;
+			interrupts = <0 33 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart0>;
+			clocks = <&peri_clk 0>;
+		};
+
+		serial1: serial@54006900 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006900 0x40>;
+			interrupts = <0 35 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart1>;
+			clocks = <&peri_clk 1>;
+		};
+
+		serial2: serial@54006a00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006a00 0x40>;
+			interrupts = <0 37 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart2>;
+			clocks = <&peri_clk 2>;
+		};
+
+		serial3: serial@54006b00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006b00 0x40>;
+			interrupts = <0 177 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart3>;
+			clocks = <&peri_clk 3>;
+		};
+
+		i2c0: i2c@58780000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58780000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 41 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c0>;
+			clocks = <&peri_clk 4>;
+			clock-frequency = <100000>;
+		};
+
+		i2c1: i2c@58781000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58781000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 42 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c1>;
+			clocks = <&peri_clk 5>;
+			clock-frequency = <100000>;
+		};
+
+		i2c2: i2c@58782000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58782000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 43 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c2>;
+			clocks = <&peri_clk 6>;
+			clock-frequency = <100000>;
+		};
+
+		i2c3: i2c@58783000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58783000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 44 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c3>;
+			clocks = <&peri_clk 7>;
+			clock-frequency = <100000>;
+		};
+
+		/* chip-internal connection for HDMI */
+		i2c6: i2c@58786000 {
+			compatible = "socionext,uniphier-fi2c";
+			reg = <0x58786000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 26 4>;
+			clocks = <&peri_clk 10>;
+			clock-frequency = <400000>;
+		};
+
+		system_bus: system-bus@58c00000 {
+			compatible = "socionext,uniphier-system-bus";
+			status = "disabled";
+			reg = <0x58c00000 0x400>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_system_bus>;
+		};
+
+		smpctrl@59801000 {
+			compatible = "socionext,uniphier-smpctrl";
+			reg = <0x59801000 0x400>;
+		};
+
+		sdctrl@59810000 {
+			compatible = "socionext,uniphier-pxs3-sdctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59810000 0x400>;
+
+			sd_clk: clock {
+				compatible = "socionext,uniphier-pxs3-sd-clock";
+				#clock-cells = <1>;
+			};
+
+			sd_rst: reset {
+				compatible = "socionext,uniphier-pxs3-sd-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		perictrl@59820000 {
+			compatible = "socionext,uniphier-pxs3-perictrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59820000 0x200>;
+
+			peri_clk: clock {
+				compatible = "socionext,uniphier-pxs3-peri-clock";
+				#clock-cells = <1>;
+			};
+
+			peri_rst: reset {
+				compatible = "socionext,uniphier-pxs3-peri-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		emmc: sdhc@5a000000 {
+			compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc";
+			reg = <0x5a000000 0x400>;
+			interrupts = <0 78 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_emmc>;
+			clocks = <&sys_clk 4>;
+			bus-width = <8>;
+			mmc-ddr-1_8v;
+			mmc-hs200-1_8v;
+			cdns,phy-input-delay-legacy = <4>;
+			cdns,phy-input-delay-mmc-highspeed = <2>;
+			cdns,phy-input-delay-mmc-ddr = <3>;
+			cdns,phy-dll-delay-sdclk = <21>;
+			cdns,phy-dll-delay-sdclk-hsmmc = <21>;
+		};
+
+		soc-glue@5f800000 {
+			compatible = "socionext,uniphier-pxs3-soc-glue",
+				     "simple-mfd", "syscon";
+			reg = <0x5f800000 0x2000>;
+
+			pinctrl: pinctrl {
+				compatible = "socionext,uniphier-pxs3-pinctrl";
+			};
+		};
+
+		aidet: aidet@5fc20000 {
+			compatible = "socionext,uniphier-pxs3-aidet";
+			reg = <0x5fc20000 0x200>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gic: interrupt-controller@5fe00000 {
+			compatible = "arm,gic-v3";
+			reg = <0x5fe00000 0x10000>,	/* GICD */
+			      <0x5fe80000 0x80000>;	/* GICR */
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <1 9 4>;
+		};
+
+		sysctrl@61840000 {
+			compatible = "socionext,uniphier-pxs3-sysctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x61840000 0x10000>;
+
+			sys_clk: clock {
+				compatible = "socionext,uniphier-pxs3-clock";
+				#clock-cells = <1>;
+			};
+
+			sys_rst: reset {
+				compatible = "socionext,uniphier-pxs3-reset";
+				#reset-cells = <1>;
+			};
+
+			watchdog {
+				compatible = "socionext,uniphier-wdt";
+			};
+		};
+
+		nand: nand@68000000 {
+			compatible = "socionext,uniphier-denali-nand-v5b";
+			status = "disabled";
+			reg-names = "nand_data", "denali_reg";
+			reg = <0x68000000 0x20>, <0x68100000 0x1000>;
+			interrupts = <0 65 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_nand>;
+			clocks = <&sys_clk 2>;
+		};
+	};
+};
+
+#include "uniphier-pinctrl.dtsi"
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ref-daughter.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ref-daughter.dtsi
index 4685a8d89cba..e66d999d9f5d 120000..100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ref-daughter.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-ref-daughter.dtsi
@@ -1 +1 @@
-../../../../arm/boot/dts/uniphier-ref-daughter.dtsi
-\ No newline at end of file
+#include <arm/uniphier-ref-daughter.dtsi>
diff --git a/arch/arm64/boot/dts/socionext/uniphier-support-card.dtsi b/arch/arm64/boot/dts/socionext/uniphier-support-card.dtsi
index 1246db9be2a1..28c5b4ed1d95 120000..100644
--- a/arch/arm64/boot/dts/socionext/uniphier-support-card.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-support-card.dtsi
@@ -1 +1 @@
-../../../../arm/boot/dts/uniphier-support-card.dtsi
-\ No newline at end of file
+#include <arm/uniphier-support-card.dtsi>
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi
index cdc6a437dcc7..b87b8316f4ac 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi
@@ -11,7 +11,7 @@
  * the License, or (at your option) any later version.
  */
 
-&amba {
+/ {
 	misc_clk: misc_clk {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -29,12 +29,60 @@
 		#clock-cells = <0>;
 		clock-frequency = <75000000>;
 	};
+
+	clk100: clk100 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	clk600: clk600 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <600000000>;
+	};
 };
 
 &can0 {
 	clocks = <&misc_clk &misc_clk>;
 };
 
+&can1 {
+	clocks = <&misc_clk &misc_clk>;
+};
+
+&fpd_dma_chan1 {
+	clocks = <&clk600>, <&clk100>;
+};
+
+&fpd_dma_chan2 {
+	clocks = <&clk600>, <&clk100>;
+};
+
+&fpd_dma_chan3 {
+	clocks = <&clk600>, <&clk100>;
+};
+
+&fpd_dma_chan4 {
+	clocks = <&clk600>, <&clk100>;
+};
+
+&fpd_dma_chan5 {
+	clocks = <&clk600>, <&clk100>;
+};
+
+&fpd_dma_chan6 {
+	clocks = <&clk600>, <&clk100>;
+};
+
+&fpd_dma_chan7 {
+	clocks = <&clk600>, <&clk100>;
+};
+
+&fpd_dma_chan8 {
+	clocks = <&clk600>, <&clk100>;
+};
+
 &gem0 {
 	clocks = <&misc_clk>, <&misc_clk>, <&misc_clk>;
 };
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts b/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts
index ef1b9e573af0..bf552674a834 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts
@@ -13,13 +13,15 @@
 
 /dts-v1/;
 
-/include/ "zynqmp.dtsi"
-/include/ "zynqmp-ep108-clk.dtsi"
+#include "zynqmp.dtsi"
+#include "zynqmp-ep108-clk.dtsi"
 
 / {
 	model = "ZynqMP EP108";
 
 	aliases {
+		mmc0 = &sdhci0;
+		mmc1 = &sdhci1;
 		serial0 = &uart0;
 	};
 
@@ -37,6 +39,10 @@
 	status = "okay";
 };
 
+&can1 {
+	status = "okay";
+};
+
 &gem0 {
 	status = "okay";
 	phy-handle = <&phy0>;
@@ -55,7 +61,7 @@
 	status = "okay";
 	clock-frequency = <400000>;
 	eeprom@54 {
-		compatible = "at,24c64";
+		compatible = "atmel,24c64";
 		reg = <0x54>;
 	};
 };
@@ -64,7 +70,7 @@
 	status = "okay";
 	clock-frequency = <400000>;
 	eeprom@55 {
-		compatible = "at,24c64";
+		compatible = "atmel,24c64";
 		reg = <0x55>;
 	};
 };
@@ -92,7 +98,7 @@
 		spi-max-frequency = <50000000>;
 		reg = <0>;
 
-		spi0_flash0@00000000 {
+		spi0_flash0@0 {
 			label = "spi0_flash0";
 			reg = <0x0 0x100000>;
 		};
@@ -109,7 +115,7 @@
 		spi-max-frequency = <50000000>;
 		reg = <0>;
 
-		spi1_flash0@00000000 {
+		spi1_flash0@0 {
 			label = "spi1_flash0";
 			reg = <0x0 0x100000>;
 		};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
index 54dc28351c8c..7665fbddff28 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
@@ -20,33 +20,84 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu@0 {
+		cpu0: cpu@0 {
 			compatible = "arm,cortex-a53", "arm,armv8";
 			device_type = "cpu";
 			enable-method = "psci";
+			operating-points-v2 = <&cpu_opp_table>;
 			reg = <0x0>;
+			cpu-idle-states = <&CPU_SLEEP_0>;
 		};
 
-		cpu@1 {
+		cpu1: cpu@1 {
 			compatible = "arm,cortex-a53", "arm,armv8";
 			device_type = "cpu";
 			enable-method = "psci";
 			reg = <0x1>;
+			operating-points-v2 = <&cpu_opp_table>;
+			cpu-idle-states = <&CPU_SLEEP_0>;
 		};
 
-		cpu@2 {
+		cpu2: cpu@2 {
 			compatible = "arm,cortex-a53", "arm,armv8";
 			device_type = "cpu";
 			enable-method = "psci";
 			reg = <0x2>;
+			operating-points-v2 = <&cpu_opp_table>;
+			cpu-idle-states = <&CPU_SLEEP_0>;
 		};
 
-		cpu@3 {
+		cpu3: cpu@3 {
 			compatible = "arm,cortex-a53", "arm,armv8";
 			device_type = "cpu";
 			enable-method = "psci";
 			reg = <0x3>;
+			operating-points-v2 = <&cpu_opp_table>;
+			cpu-idle-states = <&CPU_SLEEP_0>;
 		};
+
+		idle-states {
+			entry-method = "arm,psci";
+
+			CPU_SLEEP_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x40000000>;
+				local-timer-stop;
+				entry-latency-us = <300>;
+				exit-latency-us = <600>;
+				min-residency-us = <10000>;
+			};
+		};
+	};
+
+	cpu_opp_table: cpu_opp_table {
+		compatible = "operating-points-v2";
+		opp-shared;
+		opp00 {
+			opp-hz = /bits/ 64 <1199999988>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <500000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <599999994>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <500000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <399999996>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <500000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <299999997>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <500000>;
+		};
+	};
+
+	dcc: dcc {
+		compatible = "arm,dcc";
+		status = "disabled";
 	};
 
 	pmu {
@@ -119,6 +170,190 @@
 			rx-fifo-depth = <0x40>;
 		};
 
+		cci: cci@fd6e0000 {
+			compatible = "arm,cci-400";
+			reg = <0x0 0xfd6e0000 0x0 0x9000>;
+			ranges = <0x0 0x0 0xfd6e0000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			pmu@9000 {
+				compatible = "arm,cci-400-pmu,r1";
+				reg = <0x9000 0x5000>;
+				interrupt-parent = <&gic>;
+				interrupts = <0 123 4>,
+					     <0 123 4>,
+					     <0 123 4>,
+					     <0 123 4>,
+					     <0 123 4>;
+			};
+		};
+
+		/* GDMA */
+		fpd_dma_chan1: dma@fd500000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xfd500000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <0 124 4>;
+			clock-names = "clk_main", "clk_apb";
+			xlnx,bus-width = <128>;
+		};
+
+		fpd_dma_chan2: dma@fd510000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xfd510000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <0 125 4>;
+			clock-names = "clk_main", "clk_apb";
+			xlnx,bus-width = <128>;
+		};
+
+		fpd_dma_chan3: dma@fd520000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xfd520000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <0 126 4>;
+			clock-names = "clk_main", "clk_apb";
+			xlnx,bus-width = <128>;
+		};
+
+		fpd_dma_chan4: dma@fd530000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xfd530000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <0 127 4>;
+			clock-names = "clk_main", "clk_apb";
+			xlnx,bus-width = <128>;
+		};
+
+		fpd_dma_chan5: dma@fd540000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xfd540000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <0 128 4>;
+			clock-names = "clk_main", "clk_apb";
+			xlnx,bus-width = <128>;
+		};
+
+		fpd_dma_chan6: dma@fd550000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xfd550000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <0 129 4>;
+			clock-names = "clk_main", "clk_apb";
+			xlnx,bus-width = <128>;
+		};
+
+		fpd_dma_chan7: dma@fd560000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xfd560000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <0 130 4>;
+			clock-names = "clk_main", "clk_apb";
+			xlnx,bus-width = <128>;
+		};
+
+		fpd_dma_chan8: dma@fd570000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xfd570000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <0 131 4>;
+			clock-names = "clk_main", "clk_apb";
+			xlnx,bus-width = <128>;
+		};
+
+		/* LPDDMA default allows only secured access. inorder to enable
+		 * These dma channels, Users should ensure that these dma
+		 * Channels are allowed for non secure access.
+		 */
+		lpd_dma_chan1: dma@ffa80000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xffa80000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <0 77 4>;
+			clock-names = "clk_main", "clk_apb";
+			xlnx,bus-width = <64>;
+		};
+
+		lpd_dma_chan2: dma@ffa90000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xffa90000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <0 78 4>;
+			clock-names = "clk_main", "clk_apb";
+			xlnx,bus-width = <64>;
+		};
+
+		lpd_dma_chan3: dma@ffaa0000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xffaa0000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <0 79 4>;
+			clock-names = "clk_main", "clk_apb";
+			xlnx,bus-width = <64>;
+		};
+
+		lpd_dma_chan4: dma@ffab0000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xffab0000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <0 80 4>;
+			clock-names = "clk_main", "clk_apb";
+			xlnx,bus-width = <64>;
+		};
+
+		lpd_dma_chan5: dma@ffac0000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xffac0000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <0 81 4>;
+			clock-names = "clk_main", "clk_apb";
+			xlnx,bus-width = <64>;
+		};
+
+		lpd_dma_chan6: dma@ffad0000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xffad0000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <0 82 4>;
+			clock-names = "clk_main", "clk_apb";
+			xlnx,bus-width = <64>;
+		};
+
+		lpd_dma_chan7: dma@ffae0000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xffae0000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <0 83 4>;
+			clock-names = "clk_main", "clk_apb";
+			xlnx,bus-width = <64>;
+		};
+
+		lpd_dma_chan8: dma@ffaf0000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xffaf0000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <0 84 4>;
+			clock-names = "clk_main", "clk_apb";
+			xlnx,bus-width = <64>;
+		};
+
 		gem0: ethernet@ff0b0000 {
 			compatible = "cdns,gem";
 			status = "disabled";
@@ -215,12 +450,9 @@
 			      <0x0 0xfd480000 0x0 0x1000>,
 			      <0x80 0x00000000 0x0 0x1000000>;
 			reg-names = "breg", "pcireg", "cfg";
-			ranges = <0x02000000 0x00000000 0xe0000000 0x00000000
-				  0xe0000000 0x00000000 0x10000000
-				  /* non-prefetchable memory */
-				  0x43000000 0x00000006 0x00000000 0x00000006
-				  0x00000000 0x00000002 0x00000000>;
-				  /* prefetchable memory */
+			ranges = <0x02000000 0x00000000 0xe0000000 0x00000000 0xe0000000 0x00000000 0x10000000	/* non-prefetchable memory */
+				  0x43000000 0x00000006 0x00000000 0x00000006 0x00000000 0x00000002 0x00000000>;/* prefetchable memory */
+			bus-range = <0x00 0xff>;
 			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
 			interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc 0x1>,
 					<0x0 0x0 0x0 0x2 &pcie_intc 0x2>,
@@ -233,6 +465,16 @@
 			};
 		};
 
+		rtc: rtc@ffa60000 {
+			compatible = "xlnx,zynqmp-rtc";
+			status = "disabled";
+			reg = <0x0 0xffa60000 0x0 0x100>;
+			interrupt-parent = <&gic>;
+			interrupts = <0 26 4>, <0 27 4>;
+			interrupt-names = "alarm", "sec";
+			calibration = <0x8000>;
+		};
+
 		sata: ahci@fd0c0000 {
 			compatible = "ceva,ahci-1v84";
 			status = "disabled";
@@ -262,13 +504,14 @@
 		smmu: smmu@fd800000 {
 			compatible = "arm,mmu-500";
 			reg = <0x0 0xfd800000 0x0 0x20000>;
+			status = "disabled";
 			#global-interrupts = <1>;
 			interrupt-parent = <&gic>;
-			interrupts = <0 157 4>,
-				<0 157 4>, <0 157 4>, <0 157 4>, <0 157 4>,
-				<0 157 4>, <0 157 4>, <0 157 4>, <0 157 4>,
-				<0 157 4>, <0 157 4>, <0 157 4>, <0 157 4>,
-				<0 157 4>, <0 157 4>, <0 157 4>, <0 157 4>;
+			interrupts = <0 155 4>,
+				<0 155 4>, <0 155 4>, <0 155 4>, <0 155 4>,
+				<0 155 4>, <0 155 4>, <0 155 4>, <0 155 4>,
+				<0 155 4>, <0 155 4>, <0 155 4>, <0 155 4>,
+				<0 155 4>, <0 155 4>, <0 155 4>, <0 155 4>;
 		};
 
 		spi0: spi@ff040000 {
@@ -330,7 +573,7 @@
 		};
 
 		uart0: serial@ff000000 {
-			compatible = "cdns,uart-r1p8";
+			compatible = "cdns,uart-r1p12", "xlnx,xuartps";
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 21 4>;
@@ -339,7 +582,7 @@
 		};
 
 		uart1: serial@ff010000 {
-			compatible = "cdns,uart-r1p8";
+			compatible = "cdns,uart-r1p12", "xlnx,xuartps";
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 22 4>;
diff --git a/arch/arm64/boot/dts/zte/Makefile b/arch/arm64/boot/dts/zte/Makefile
index 667806620f59..d86c4def6bc9 100644
--- a/arch/arm64/boot/dts/zte/Makefile
+++ b/arch/arm64/boot/dts/zte/Makefile
@@ -1,4 +1,5 @@
 dtb-$(CONFIG_ARCH_ZX) += zx296718-evb.dtb
+dtb-$(CONFIG_ARCH_ZX) += zx296718-pcbox.dtb
 
 always		:= $(dtb-y)
 subdir-y	:= $(dts-dirs)
diff --git a/arch/arm64/boot/dts/zte/zx296718-evb.dts b/arch/arm64/boot/dts/zte/zx296718-evb.dts
index bb900d2bbcfb..cb2519ecd724 100644
--- a/arch/arm64/boot/dts/zte/zx296718-evb.dts
+++ b/arch/arm64/boot/dts/zte/zx296718-evb.dts
@@ -57,16 +57,28 @@
 		reg = <0x40000000 0x40000000>;
 	};
 
-	sound0 {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "zx_snd_spdif0";
+	sound-spdif0 {
+		compatible = "audio-graph-card";
+		dais = <&spdif0_port>;
+	};
 
-		simple-audio-card,cpu {
-			sound-dai = <&spdif0>;
-		};
+	sound-i2s0 {
+		compatible = "audio-graph-card";
+		dais = <&i2s0_port>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&amplifier_pins>;
+		pa-gpios = <&bgpio4 0 GPIO_ACTIVE_HIGH>;
+		widgets = "Line", "Line Out Jack";
+		routing = "Amplifier", "LINEOUTL",
+			  "Amplifier", "LINEOUTR",
+			  "Line Out Jack", "Amplifier";
+	};
+};
 
-		simple-audio-card,codec {
-			sound-dai = <&hdmi>;
+&aud96p22 {
+	port {
+		aud96p22_endpoint: endpoint {
+			remote-endpoint = <&i2s0_endpoint>;
 		};
 	};
 };
@@ -77,6 +89,36 @@
 
 &hdmi {
 	status = "okay";
+
+	port {
+		hdmi_endpoint: endpoint {
+			remote-endpoint = <&spdif0_endpoint>;
+		};
+	};
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2s0 {
+	status = "okay";
+
+	i2s0_port: port {
+		i2s0_endpoint: endpoint {
+			remote-endpoint = <&aud96p22_endpoint>;
+			dai-format = "i2s";
+			frame-master;
+			bitclock-master;
+		};
+	};
+};
+
+&pmm {
+	amplifier_pins: amplifier {
+		pins = "TSI3_DATA";
+		function = "BGPIO";
+	};
 };
 
 &sd1 {
@@ -85,6 +127,16 @@
 
 &spdif0 {
 	status = "okay";
+
+	spdif0_port: port {
+		spdif0_endpoint: endpoint {
+			remote-endpoint = <&hdmi_endpoint>;
+		};
+	};
+};
+
+&tvenc {
+	status = "okay";
 };
 
 &uart0 {
diff --git a/arch/arm64/boot/dts/zte/zx296718-pcbox.dts b/arch/arm64/boot/dts/zte/zx296718-pcbox.dts
new file mode 100644
index 000000000000..e02509f7082b
--- /dev/null
+++ b/arch/arm64/boot/dts/zte/zx296718-pcbox.dts
@@ -0,0 +1,143 @@
+/*
+ * Copyright (C) 2017 Sanechips Technology Co., Ltd.
+ * Copyright 2017 Linaro Ltd.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+/dts-v1/;
+#include "zx296718.dtsi"
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "ZTE ZX296718 PCBOX Board";
+	compatible = "zte,zx296718-pcbox", "zte,zx296718";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	a53_vdd0v9: regulator-a53 {
+		compatible = "pwm-regulator";
+		pwms = <&pwm 3 1250 PWM_POLARITY_INVERTED>;
+		regulator-name = "A53_VDD0V9";
+		regulator-min-microvolt = <855000>;
+		regulator-max-microvolt = <1183000>;
+		pwm-dutycycle-unit = <100>;
+		pwm-dutycycle-range = <0 100>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	sound-spdif0 {
+		compatible = "audio-graph-card";
+		dais = <&spdif0_port>;
+	};
+
+	sound-i2s0 {
+		compatible = "audio-graph-card";
+		dais = <&i2s0_port>;
+	};
+};
+
+&aud96p22 {
+	port {
+		aud96p22_endpoint: endpoint {
+			remote-endpoint = <&i2s0_endpoint>;
+		};
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&a53_vdd0v9>;
+};
+
+&emmc {
+	status = "okay";
+};
+
+&hdmi {
+	status = "disabled";
+
+	port {
+		hdmi_endpoint: endpoint {
+			remote-endpoint = <&spdif0_endpoint>;
+		};
+	};
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2s0 {
+	status = "okay";
+
+	i2s0_port: port {
+		i2s0_endpoint: endpoint {
+			remote-endpoint = <&aud96p22_endpoint>;
+			dai-format = "i2s";
+			frame-master;
+			bitclock-master;
+		};
+	};
+};
+
+&irdec {
+	status = "okay";
+};
+
+&pmm {
+	pwm3_pins: pwm3 {
+		pins = "KEY_ROW2";
+		function = "PWM";
+	};
+
+	vga_pins: vga {
+		pins = "KEY_COL1", "KEY_COL2", "VGA_HS", "VGA_VS";
+		function = "VGA";
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm3_pins>;
+	status = "okay";
+};
+
+&sd0 {
+	status = "okay";
+};
+
+&sd1 {
+	status = "okay";
+};
+
+&spdif0 {
+	status = "okay";
+
+	spdif0_port: port {
+		spdif0_endpoint: endpoint {
+			remote-endpoint = <&hdmi_endpoint>;
+		};
+	};
+};
+
+&tvenc {
+	status = "disabled";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&vga {
+	pinctrl-names = "default";
+	pinctrl-0 = <&vga_pins>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/zte/zx296718.dtsi b/arch/arm64/boot/dts/zte/zx296718.dtsi
index d83bf789c864..6eef64761009 100644
--- a/arch/arm64/boot/dts/zte/zx296718.dtsi
+++ b/arch/arm64/boot/dts/zte/zx296718.dtsi
@@ -53,6 +53,13 @@
 	interrupt-parent = <&gic>;
 
 	aliases {
+		gpio0 = &bgpio0;
+		gpio1 = &bgpio1;
+		gpio2 = &bgpio2;
+		gpio3 = &bgpio3;
+		gpio4 = &bgpio4;
+		gpio5 = &bgpio5;
+		gpio6 = &bgpio6;
 		serial0 = &uart0;
 	};
 
@@ -120,26 +127,31 @@
 
 		opp-500000000 {
 			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <866000>;
 			clock-latency-ns = <500000>;
 		};
 
 		opp-648000000 {
 			opp-hz = /bits/ 64 <648000000>;
+			opp-microvolt = <866000>;
 			clock-latency-ns = <500000>;
 		};
 
 		opp-800000000 {
 			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <888000>;
 			clock-latency-ns = <500000>;
 		};
 
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <898000>;
 			clock-latency-ns = <500000>;
 		};
 
 		opp-1188000000 {
 			opp-hz = /bits/ 64 <1188000000>;
+			opp-microvolt = <1015000>;
 			clock-latency-ns = <500000>;
 		};
 	};
@@ -283,11 +295,23 @@
 		compatible = "simple-bus";
 		ranges;
 
+		irdec: ir-decoder@111000 {
+			compatible = "zte,zx296718-irdec";
+			reg = <0x111000 0x1000>;
+			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
 		aon_sysctrl: aon-sysctrl@116000 {
 			compatible = "zte,zx296718-aon-sysctrl", "syscon";
 			reg = <0x116000 0x1000>;
 		};
 
+		iocfg: pin-controller@119000 {
+			compatible = "zte,zx296718-iocfg";
+			reg = <0x119000 0x1000>;
+		};
+
 		uart0: uart@11f000 {
 			compatible = "arm,pl011", "arm,primecell";
 			arm,primecell-periphid = <0x001feffe>;
@@ -311,7 +335,6 @@
 			clock-frequency = <50000000>;
 			clocks = <&topcrm SD0_AHB>, <&topcrm SD0_WCLK>;
 			clock-names = "biu", "ciu";
-			num-slots = <1>;
 			max-frequency = <50000000>;
 			cap-sdio-irq;
 			cap-sd-highspeed;
@@ -336,7 +359,6 @@
 			clock-frequency = <167000000>;
 			clocks = <&topcrm SD1_AHB>, <&topcrm SD1_WCLK>;
 			clock-names = "biu", "ciu";
-			num-slots = <1>;
 			max-frequency = <167000000>;
 			cap-sdio-irq;
 			cap-sd-highspeed;
@@ -360,12 +382,109 @@
 			#clock-cells = <1>;
 		};
 
+		bgpio0: gpio@142d000 {
+			compatible = "zte,zx296718-gpio", "zte,zx296702-gpio";
+			reg = <0x142d000 0x40>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmm 0 48 16>;
+			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		bgpio1: gpio@142d040 {
+			compatible = "zte,zx296718-gpio", "zte,zx296702-gpio";
+			reg = <0x142d040 0x40>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmm 0 80 16>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		bgpio2: gpio@142d080 {
+			compatible = "zte,zx296718-gpio", "zte,zx296702-gpio";
+			reg = <0x142d080 0x40>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmm 0 80 3
+				       &pmm 3 32 4
+				       &pmm 7 83 9>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		bgpio3: gpio@142d0c0 {
+			compatible = "zte,zx296718-gpio", "zte,zx296702-gpio";
+			reg = <0x142d0c0 0x40>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmm 0 92 16>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		bgpio4: gpio@142d100 {
+			compatible = "zte,zx296718-gpio", "zte,zx296702-gpio";
+			reg = <0x142d100 0x40>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmm 0 108 12
+				       &pmm 12 121 4>;
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		bgpio5: gpio@142d140 {
+			compatible = "zte,zx296718-gpio", "zte,zx296702-gpio";
+			reg = <0x142d140 0x40>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmm 0 125 16>;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		bgpio6: gpio@142d180 {
+			compatible = "zte,zx296718-gpio", "zte,zx296702-gpio";
+			reg = <0x142d180 0x40>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmm 0 141 2>;
+			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
 		lsp1crm: clock-controller@1430000 {
 			compatible = "zte,zx296718-lsp1crm";
 			reg = <0x01430000 0x1000>;
 			#clock-cells = <1>;
 		};
 
+		pwm: pwm@1439000 {
+			compatible = "zte,zx296718-pwm";
+			reg = <0x1439000 0x1000>;
+			clocks = <&lsp1crm LSP1_PWM_PCLK>,
+				 <&lsp1crm LSP1_PWM_WCLK>;
+			clock-names = "pclk", "wclk";
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
 		vou: vou@1440000 {
 			compatible = "zte,zx296718-vou";
 			#address-cells = <1>;
@@ -387,6 +506,16 @@
 					      "main_wclk", "aux_wclk";
 			};
 
+			vga: vga@8000 {
+				compatible = "zte,zx296718-vga";
+				reg = <0x8000 0x1000>;
+				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&topcrm VGA_I2C_WCLK>;
+				clock-names = "i2c_wclk";
+				zte,vga-power-control = <&sysctrl 0x170 0xe0>;
+				status = "disabled";
+			};
+
 			hdmi: hdmi@c000 {
 				compatible = "zte,zx296718-hdmi";
 				reg = <0xc000 0x4000>;
@@ -413,6 +542,12 @@
 			#clock-cells = <1>;
 		};
 
+		pmm: pin-controller@1462000 {
+			compatible = "zte,zx296718-pmm";
+			reg = <0x1462000 0x1000>;
+			zte,auxiliary-controller = <&iocfg>;
+		};
+
 		sysctrl: sysctrl@1463000 {
 			compatible = "zte,zx296718-sysctrl", "syscon";
 			reg = <0x1463000 0x1000>;
@@ -445,6 +580,38 @@
 			#clock-cells = <1>;
 		};
 
+		i2s0: i2s@1482000 {
+			compatible = "zte,zx296718-i2s", "zte,zx296702-i2s";
+			reg = <0x01482000 0x1000>;
+			clocks = <&audiocrm AUDIO_I2S0_WCLK>,
+				 <&audiocrm AUDIO_I2S0_PCLK>;
+			clock-names = "wclk", "pclk";
+			assigned-clocks = <&audiocrm I2S0_WCLK_MUX>;
+			assigned-clock-parents = <&topcrm AUDIO_99M>;
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dma 22>, <&dma 23>;
+			dma-names = "tx", "rx";
+			#sound-dai-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@1486000 {
+			compatible = "zte,zx296718-i2c";
+			reg = <0x01486000 0x1000>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&audiocrm AUDIO_I2C0_WCLK>;
+			clock-frequency = <1600000>;
+			status = "disabled";
+
+			aud96p22: codec@22 {
+				compatible = "zte,zx-aud96p22";
+				#sound-dai-cells = <0>;
+				reg = <0x22>;
+			};
+		};
+
 		spdif0: spdif@1488000 {
 			compatible = "zte,zx296702-spdif";
 			reg = <0x1488000 0x1000>;
author	Linus Torvalds <torvalds@linux-foundation.org>	2017-09-10 20:54:48 -0700
committer	Linus Torvalds <torvalds@linux-foundation.org>	2017-09-10 20:54:48 -0700
commit	e90937e756938f03d37d4cae7c82316a3a425944 (patch)
tree	0667f5ac6ad368278e9658ba483c79d1a60a65cd /arch/arm64/boot
parent	ae46654bcff303b33facbbd04a3ad9c21d303f9b (diff)
parent	b884026a2b80529fc7a4de729b92ee0ba555bfed (diff)
download	talos-op-linux-e90937e756938f03d37d4cae7c82316a3a425944.tar.gz talos-op-linux-e90937e756938f03d37d4cae7c82316a3a425944.zip