summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-shmobile
diff options
context:
space:
mode:
authorMagnus Damm <damm@opensource.se>2011-08-18 05:44:07 +0000
committerPaul Mundt <lethal@linux-sh.org>2011-08-29 16:50:08 +0900
commit28626632d83696ab3c8f2b9d5d8a658a1787551f (patch)
tree1d6a7d5423036b6a0f116bb11f673e5306963dd9 /arch/arm/mach-shmobile
parentc6a389f123b9f68d605bb7e0f9b32ec1e3e14132 (diff)
downloadtalos-op-linux-28626632d83696ab3c8f2b9d5d8a658a1787551f.tar.gz
talos-op-linux-28626632d83696ab3c8f2b9d5d8a658a1787551f.zip
ARM: mach-shmobile: Kota2 SCIFA2 and SMSC911X support
Kota2 base board support including the on-chip SCIFA2 serial console and the on-board SMSC911X ethernet port. The s73a0 SMP bits are also updated to include Kota2. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Diffstat (limited to 'arch/arm/mach-shmobile')
-rw-r--r--arch/arm/mach-shmobile/Kconfig7
-rw-r--r--arch/arm/mach-shmobile/Makefile1
-rw-r--r--arch/arm/mach-shmobile/board-kota2.c168
-rw-r--r--arch/arm/mach-shmobile/platsmp.c10
4 files changed, 182 insertions, 4 deletions
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 0c8f6cf3e948..c1b45342e1fb 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -69,6 +69,11 @@ config MACH_MACKEREL
depends on ARCH_SH7372
select ARCH_REQUIRE_GPIOLIB
+config MACH_KOTA2
+ bool "KOTA2 board"
+ select ARCH_REQUIRE_GPIOLIB
+ depends on ARCH_SH73A0
+
comment "SH-Mobile System Configuration"
menu "Memory configuration"
@@ -78,6 +83,7 @@ config MEMORY_START
default "0x50000000" if MACH_G3EVM
default "0x40000000" if MACH_G4EVM || MACH_AP4EVB || MACH_AG5EVM || \
MACH_MACKEREL
+ default "0x41000000" if MACH_KOTA2
default "0x00000000"
---help---
Tweak this only when porting to a new machine which does not
@@ -89,6 +95,7 @@ config MEMORY_SIZE
default "0x08000000" if MACH_G3EVM
default "0x08000000" if MACH_G4EVM
default "0x20000000" if MACH_AG5EVM
+ default "0x1e000000" if MACH_KOTA2
default "0x10000000" if MACH_AP4EVB || MACH_MACKEREL
default "0x04000000"
help
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index 612b27000c3e..2aec2f732515 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -41,6 +41,7 @@ obj-$(CONFIG_MACH_G4EVM) += board-g4evm.o
obj-$(CONFIG_MACH_AP4EVB) += board-ap4evb.o
obj-$(CONFIG_MACH_AG5EVM) += board-ag5evm.o
obj-$(CONFIG_MACH_MACKEREL) += board-mackerel.o
+obj-$(CONFIG_MACH_KOTA2) += board-kota2.o
# Framework support
obj-$(CONFIG_SMP) += $(smp-y)
diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c
new file mode 100644
index 000000000000..4ab05e855077
--- /dev/null
+++ b/arch/arm/mach-shmobile/board-kota2.c
@@ -0,0 +1,168 @@
+/*
+ * kota2 board support
+ *
+ * Copyright (C) 2011 Renesas Solutions Corp.
+ * Copyright (C) 2011 Magnus Damm
+ * Copyright (C) 2010 Takashi Yoshii <yoshii.takashi.zj@renesas.com>
+ * Copyright (C) 2009 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/smsc911x.h>
+#include <linux/gpio.h>
+#include <mach/hardware.h>
+#include <mach/sh73a0.h>
+#include <mach/common.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <asm/hardware/gic.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/traps.h>
+
+static struct resource smsc9220_resources[] = {
+ [0] = {
+ .start = 0x14000000, /* CS5A */
+ .end = 0x140000ff, /* A1->A7 */
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = gic_spi(33), /* PINTA2 @ PORT144 */
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct smsc911x_platform_config smsc9220_platdata = {
+ .flags = SMSC911X_USE_32BIT, /* 32-bit SW on 16-bit HW bus */
+ .phy_interface = PHY_INTERFACE_MODE_MII,
+ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+ .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
+};
+
+static struct platform_device eth_device = {
+ .name = "smsc911x",
+ .id = 0,
+ .dev = {
+ .platform_data = &smsc9220_platdata,
+ },
+ .resource = smsc9220_resources,
+ .num_resources = ARRAY_SIZE(smsc9220_resources),
+};
+
+static struct platform_device *kota2_devices[] __initdata = {
+ &eth_device,
+};
+
+static struct map_desc kota2_io_desc[] __initdata = {
+ /* create a 1:1 entity map for 0xe6xxxxxx
+ * used by CPGA, INTC and PFC.
+ */
+ {
+ .virtual = 0xe6000000,
+ .pfn = __phys_to_pfn(0xe6000000),
+ .length = 256 << 20,
+ .type = MT_DEVICE_NONSHARED
+ },
+};
+
+static void __init kota2_map_io(void)
+{
+ iotable_init(kota2_io_desc, ARRAY_SIZE(kota2_io_desc));
+
+ /* setup early devices and console here as well */
+ sh73a0_add_early_devices();
+ shmobile_setup_console();
+}
+
+#define PINTER0A 0xe69000a0
+#define PINTCR0A 0xe69000b0
+
+void __init kota2_init_irq(void)
+{
+ sh73a0_init_irq();
+
+ /* setup PINT: enable PINTA2 as active low */
+ __raw_writel(1 << 29, PINTER0A);
+ __raw_writew(2 << 10, PINTCR0A);
+}
+
+static void __init kota2_init(void)
+{
+ sh73a0_pinmux_init();
+
+ /* SCIFA2 (UART2) */
+ gpio_request(GPIO_FN_SCIFA2_TXD1, NULL);
+ gpio_request(GPIO_FN_SCIFA2_RXD1, NULL);
+ gpio_request(GPIO_FN_SCIFA2_RTS1_, NULL);
+ gpio_request(GPIO_FN_SCIFA2_CTS1_, NULL);
+
+ /* SMSC911X */
+ gpio_request(GPIO_FN_D0_NAF0, NULL);
+ gpio_request(GPIO_FN_D1_NAF1, NULL);
+ gpio_request(GPIO_FN_D2_NAF2, NULL);
+ gpio_request(GPIO_FN_D3_NAF3, NULL);
+ gpio_request(GPIO_FN_D4_NAF4, NULL);
+ gpio_request(GPIO_FN_D5_NAF5, NULL);
+ gpio_request(GPIO_FN_D6_NAF6, NULL);
+ gpio_request(GPIO_FN_D7_NAF7, NULL);
+ gpio_request(GPIO_FN_D8_NAF8, NULL);
+ gpio_request(GPIO_FN_D9_NAF9, NULL);
+ gpio_request(GPIO_FN_D10_NAF10, NULL);
+ gpio_request(GPIO_FN_D11_NAF11, NULL);
+ gpio_request(GPIO_FN_D12_NAF12, NULL);
+ gpio_request(GPIO_FN_D13_NAF13, NULL);
+ gpio_request(GPIO_FN_D14_NAF14, NULL);
+ gpio_request(GPIO_FN_D15_NAF15, NULL);
+ gpio_request(GPIO_FN_CS5A_, NULL);
+ gpio_request(GPIO_FN_WE0__FWE, NULL);
+ gpio_request(GPIO_PORT144, NULL); /* PINTA2 */
+ gpio_direction_input(GPIO_PORT144);
+ gpio_request(GPIO_PORT145, NULL); /* RESET */
+ gpio_direction_output(GPIO_PORT145, 1);
+
+#ifdef CONFIG_CACHE_L2X0
+ /* Early BRESP enable, Shared attribute override enable, 64K*8way */
+ l2x0_init(__io(0xf0100000), 0x40460000, 0x82000fff);
+#endif
+ sh73a0_add_standard_devices();
+ platform_add_devices(kota2_devices, ARRAY_SIZE(kota2_devices));
+}
+
+static void __init kota2_timer_init(void)
+{
+ sh73a0_clock_init();
+ shmobile_timer.init();
+ return;
+}
+
+struct sys_timer kota2_timer = {
+ .init = kota2_timer_init,
+};
+
+MACHINE_START(KOTA2, "kota2")
+ .map_io = kota2_map_io,
+ .init_irq = kota2_init_irq,
+ .handle_irq = shmobile_handle_irq_gic,
+ .init_machine = kota2_init,
+ .timer = &kota2_timer,
+MACHINE_END
diff --git a/arch/arm/mach-shmobile/platsmp.c b/arch/arm/mach-shmobile/platsmp.c
index 66f980625a33..ccd81dac42f8 100644
--- a/arch/arm/mach-shmobile/platsmp.c
+++ b/arch/arm/mach-shmobile/platsmp.c
@@ -21,9 +21,11 @@
#include <asm/mach-types.h>
#include <mach/common.h>
+#define is_sh73a0() (machine_is_ag5evm() || machine_is_kota2())
+
static unsigned int __init shmobile_smp_get_core_count(void)
{
- if (machine_is_ag5evm())
+ if (is_sh73a0())
return sh73a0_get_core_count();
return 1;
@@ -31,7 +33,7 @@ static unsigned int __init shmobile_smp_get_core_count(void)
static void __init shmobile_smp_prepare_cpus(void)
{
- if (machine_is_ag5evm())
+ if (is_sh73a0())
sh73a0_smp_prepare_cpus();
}
@@ -39,13 +41,13 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
{
trace_hardirqs_off();
- if (machine_is_ag5evm())
+ if (is_sh73a0())
sh73a0_secondary_init(cpu);
}
int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
{
- if (machine_is_ag5evm())
+ if (is_sh73a0())
return sh73a0_boot_secondary(cpu);
return -ENOSYS;
OpenPOWER on IntegriCloud